Visual Index K4 BSP Adapters

Transcription

1 K4 BP Adapters I

2 4300 atalog K4 BP Adapters 60 one BP Adapters traights HMK4 Union WMK4W4NM Bulkhead Union F6MK4 60 wivel / 60 one H6MK4 wivel Union FMK4 NPTF / 60 one F3MK4 BPT / 60 one G4MK4 / 60 one I6 I6 EMK4 Union Elbow I6 I6 6MK4 60 wivel / 60 one Elbows E6MK4 wivel Union I7 I7 JMK4 Union Tee I7 6MK4 60 wivel Branch Tee R6MK4 60 wivel Run Tee I8 J6MK4 wivel Union Tee I8 Tees I8 PNMK4 Hex Head Plug FNMK4 ap I9 I9 I9 I9 Plug aps I7 I8 onversion Adapters (hown in ection K) K4 BP onversion Adapters XHMK46 37 Flare / wivel XEMK46 37 Flare / wivel K5 K5 O-Rings and eals (hown in ection N) K4 BP O-Rings and eals D9DT Bonded eal N7 I

3 4300 atalog K4 BP Adapters K4 BP Adapters Parker K4 (BP) adapters are typically used as hose adapters on equipment designed and/or manufactured throughout Europe, especially equipment with ties to the UK, candinavia, the Netherlands, pain and Italy. BP cone adapters are similar in function to NPM (07 Adapters) but with threads. The metal-to-metal sealing is achieved by a single line of contact between the conical surface of the 60 cone seat and the corresponding surface of the ballnose or cone swivel, as shown in Fig. I. K4 adapters are manufactured in accordance with B500 standards. The 60 internal seat is designed for sealing with BP hose swivel connections offered by many manufacturers. K4 adapters mate with Parker series shown in Table I. Further enhancing the flexibility of the K4 adapter product line is the ability for the male BP cone end of the straight fittings to also be used as a port adapter in IO 79- / DIN 385 ports. This is accomplished with the addition of a bonded seal (often referred to as a Dowty seal). This product feature is illustrated in Fig. I. Fig. I K4 Interface Adapter onnection End K4 / K46 Mating Parker Hose Fitting eries D9/9, B, B, B4 Table I Parker K4 Fittings Hose Adaptability Design and onstruction onstruction: haped K4 adapters are manufactured from a hot forged construction. traight adapters are manufactured from cold drawn barstock. Threads: The standard K4 products are manufactured with the thread forms listed below: Threads: IO 8- G BPT Threads: IO 7/, JI B 003 NPTF Threads: AE J476, ANI B.0.3, FED-TD-H8/8 Reference ocations Ratings: Please refer to the last column of the part number tables located on the following pages of this section for appropriate dynamic pressure ratings. tandard Material pecification: Please refer to Table U in the Appendix ection. Fig. I K4 End Used as a Port Adapter (in IO 79/ DIN 385, Part Port) I3

4 4300 atalog K4 BP Adapters 60 one Adapters: JI vs. K4 K4 Adapters, while very similar to JI P4 cones (shown in previous section), are not interchangeable. Parker s P4 JI 60 cone adapters are manufactured in accordance to JI B8363 while Parker s K4 BP adapters are manufactured in accordance to B500. The following are some pronounced differences that may help in distinguishing between the K4 and P4 fittings:. Thread length ( A dimensions). 60 angle diameter ( B dimensions) 3. The undercut area (area between threads and hex body) on the straight K4 fittings incorporates a bonded seal locating pilot for bonded seal 4. Parker s JI fittings are stamped with JI on the forging body or hex of fitting ee Figs. I3 and I4 for details and see Tables I and I3 below for specific dimensional differences. Fig. I3 JI B one onnection (P4) ize Thread M A B / / / / / / / Table I Dimensions of JI B one onnection (JI P4) Fig. I4 B B one onnection (K4) ize Thread M A B / / / / / / / / Table I3 Dimensions of B B one onnection (K4) Fig. I5 Illustration howing Potential eakage Problem When Mixing JI and K4 omponents While the 60 cone versions of JI and K4 fittings utilize the same threads and seat angle, not all dimensions are consistent. Therefore, they cannot be interchanged because the differences can cause leakage problems. An example of this is illustrated in Fig. I5, where a gap exists between sealing surfaces. The combination of matching proper components will create an effective seal as illustrated in Fig I6. Fig. I6 An Effective eal reated with the Proper ombination of omponents I4

5 4300 atalog K4 BP Adapters Reference K4 BP Ends K4 Male K4 wivel K4 Bulkhead Thread Bulkhead Nut Hex wivel Hex Drill Male Turn Back Bulkhead ength Max Bulkhead Thickness Assembly Allowance Dash ize T4 3 D M / TE 4 / / / / / / / I5

6 4300 atalog K4 BP Adapters HMK4 Union 60 one / 60 one Mates with 9, B, B and B4 style WMK4W4NM Bulkhead Union 60 one / 60 one Mates with 9, B, B and B4 style HMK4 /8-8 / HMK4 /4-9 / HMK4 /4-9 / HMK4 3/8-9 / HMK4 3/8-9 3/ HMK4 / - 4 / HMK4 / - 4 3/ HMK4 / - 4 / HMK4 5/8-4 / HMK4 5/8-4 5/ HMK4 3/4-4 / HMK4 3/4-4 3/ HMK4 3/4-4 / HMK4 3/4-4 5/ HMK4 3/4-4 3/ HMK4 - / HMK4-5/ HMK4-3/ HMK HMK4 /4-3/ HMK4 / HMK4 /4 - / HMK4 / HMK4 / - / HMK4 / - / HMK4 - / HMK Includes Bulkhead nut. & 4WMK4W4NM / WMK4W4NM 3/ WMK4W4NM / WMK4W4NM 5/ WMK4W4NM 3/ WMK4W4NM WMK4W4NM / WMK4W4NM / F6MK4 wivel Nut onnector 60 wivel / 60 one Mates with D9/9, B, B and B4 style H6MK4 wivel Nut Union 60 wivel / 60 wivel Mates with D9 style 4-4F6MK4 /4-9 / F6MK4 /4-9 3/ F6MK4 /4-9 / F6MK4 3/8-9 / F6MK4 3/8-9 3/ F6MK4 3/8-9 / F6MK4 / - 4 3/ F6MK4 / - 4 / F6MK4 / - 4 3/ F6MK4 3/4-4 / F6MK4 3/4-4 3/ F6MK4 3/ F6MK H6MK4 /4-9 / H6MK4 3/8-9 / H6MK4 3/8-9 3/ H6MK4 / - 4 / H6MK4 / - 4 3/ H6MK4 / - 4 / H6MK4 5/8-4 5/ H6MK4 3/4-4 / H6MK4 3/4-4 3/ H6MK H6MK4 /4 - / H6MK4 / - / I6

7 4300 atalog K4 BP Adapters FMK4 NPTF Male onnector 60 one / NPT Mates with 9, B, B and B4 style F3MK4 BPT Male onnector 60 one / BPT Mates with 9, B, B and B4 style NPTF FMK4 /8-8 / FMK4 /8-8 / FMK4 /4-9 / FMK4 /4-9 / FMK4 /4-9 3/ FMK4 3/8-9 / FMK4 3/8-9 3/ FMK4 3/8-9 / FMK4 / - 4 3/ FMK4 / - 4 / FMK4 / - 4 3/ FMK4 3/4-4 / FMK4 3/4-4 3/ FMK4 3/4-4 - / FMK4-3/ FMK4 - - / BPT F3MK4 /8-8 / F3MK4 /8-8 / F3MK4 /4-9 / F3MK4 /4-9 / F3MK4 /4-9 3/ F3MK4 3/8-9 / F3MK4 3/8-9 3/ F3MK4 3/8-9 / F3MK4 / - 4 3/ F3MK4 / - 4 / F3MK4 5/8-4 / F3MK4 5/8-4 3/ F3MK4 3/4-4 3/ F3MK4 3/4-4 / F3MK4 3/ F3MK F3MK4-3/ F3MK4 /4 - / F3MK4 / - / G4MK4 Female onnector 60 one / Mates with 9, B, B and B4 style PNMK4 Hex Plug 60 one Mates with 9, B, B and B4 style 6G4MK4 3/8-9 / G4MK4 3/8-9 3/ G4MK4 / - 4 / G4MK4 / - 4 3/ G4MK4 3/4-4 / G4MK4 3/4-4 3/ G4MK4 3/4-4 / G4MK4 - / G4MK4-3/ G4MK4 - / G4MK4-3/ PNMK4 / PNMK4 / PNMK4 3/ PNMK4 / PNMK4 5/ PNMK4 3/ PNMK PNMK4 / PNMK4 / PNMK I7

8 4300 atalog K4 BP Adapters FNMK4 ap 60 one Mates with D9 style EMK4 Union Elbow 60 one / 60 one Mates with D9/9, B, B and B4 style FNMK4 / FNMK4 / FNMK4 3/ FNMK4 / FNMK4 5/ FNMK4 3/ FNMK FNMK4 / FNMK4 / Y EMK4 /8-8 / EMK4 /4-9 / EMK4 3/8-9 3/ EMK4 / - 4 / EMK4 5/8-4 5/ EMK4 3/4-4 3/ EMK EMK4 /4 - / EMK4 / - / MK4 wivel Nut Elbow 60 one / 60 wivel Mates with D9/9, B, B and B4 style E6MK4 wivel Nut Union Elbow 60 wivel / 60 wivel Mates with D9 style Y 6MK4 /8-8 / MK4 /4-9 / MK4 3/8-9 3/ MK4 / - 4 / MK4 5/8-4 5/ MK4 3/4-4 3/ MK MK4 /4 - / MK4 / - / Y 4E6MK4 /4-9 / E6MK4 3/8-9 3/ E6MK4 / - 4 / E6MK4 5/8-4 5/ E6MK4 3/4-4 3/ E6MK E6MK4 /4 - / E6MK4 / - / I8

9 4300 atalog K4 BP Adapters JMK4 Union Tee 60 one (all three ends) Mates with 9, B, B and B4 style 6MK4 wivel Nut Branch Tee 60 one / 60 one / 60 wivel Mates with D9/9, B, B and B4 style 3 Y JMK4 /8-8 /8-8 / JMK4 /4-9 /4-9 / JMK4 3/8-9 3/8-9 3/ JMK4 / - 4 / - 4 / JMK4 5/8-4 5/8-4 5/ JMK4 3/4-4 3/4-4 3/ JMK JMK4 /4 - /4 - / JMK4 / - / - / Y 3 6MK4 /8-8 /8-8 / MK4 /4-9 /4-9 / MK4 3/8-9 3/8-9 3/ MK4 / - 4 / - 4 / MK4 5/8-4 5/8-4 5/ MK4 3/4-4 3/4-4 3/ MK MK4 /4 - /4 - / R6MK4 wivel Nut Run Tee 60 wivel / 60 one / 60 one Mates with D9/9, B, B and B4 style J6MK4 wivel Nut Union Tee 60 wivel (all three ends) Mates with D9 style 3 Y R6MK4 /8-8 /8-8 / R6MK4 /4-9 /4-9 / R6MK4 3/8-9 3/8-9 3/ R6MK4 / - 4 / - 4 / R6MK4 5/8-4 5/8-4 5/ R6MK4 3/4-4 3/4-4 3/ R6MK R6MK4 /4 - /4 - / (TYP.) 3 Y 4J6MK4 /4-9 /4-9 / J6MK4 3/8-9 3/8-9 3/ J6MK4 / - 4 / - 4 / J6MK4 5/8-4 5/8-4 5/ J6MK4 3/4-4 3/4-4 3/ J6MK J6MK4 /4 - /4 - / I9

10 4300 atalog K4 BP Adapters I0