Stainless Steel Straps

Size: px

Start display at page:

Download "Stainless Steel Straps"

Candice Jacobs
5 years ago
Views:

1 Stainless Steel s

2 Stainless Steel s Nuts Nuts for use with alloy steel s New S SH Nut Code Old S SH escription AN365 self-locking, cadmium-plated steel with non-metallic insert AN363 self-locking high-temperature, cadmium-plated, steelplated nut ecommended Use For applications up to +250 F (+121 C) For applications up to +550 F (+287 C) s Eaton s Aeroquip straps are made for use on many tie-down and equipment holding applications. imum radius is that recommended to be used at the corners of objects. The latch should be located about the curvature when possible rather than on the flat. Ample wrench clearance should be provided at the nut end of the latch. oop end types are designed for use with clevis pins or bolts; the slotted loop ends are for use with eye bolts and pins. olts Nuts for use with stainless steel s New M Nut Code Old ST NONE escription MS103C plain hex; silver plated stainless steel with lockwire hole ESNA Z1200J self-locking high temperature silver plated stainless steel special ecommended Use For applications up to +800 F (+426 C) For applications up to F (+648 C) All bolts have UNJF-3A Threads Important rawing Note: s are shipped either on the trunnion or side of the latch depending on the latch assembly; therefore, care must be taken to pair even (or odd) series numbers so the complete unit will contain a. Strength ata and Material MI-S-5059 Comp 301 ½-Hard Steel and Yield Strength, lbs. in Hundredths Inches olt Material: A286 CES per AMS 5732/5737 olt Strength: Yield = 3200 lbs. ¼ 28 Yield = 5824 lbs. AN Pin-Flat Head (Clevis) in ouble Shear 3/16 = 4140 lbs. ¼ = 7360 lbs. 3 /8 = lbs. AN Eye olt Yield Strength: AN42 ( olt 3 /16 Pin) = 800 lbs. AN43 ( olt 3 /16 Pin) = 1800 lbs. AN44 ( 5 /16-24 olt ¼ Pin) = 3000 lbs. AN46 ( 3 /8-24 olt 3 /8 Pin) = 5375 lbs. 2 EATON Aerospace Group TF April 2013

3 Stainless Steel Engineering ata oop End/ atch Spotwelds Nut (Type). Pin oop ia *All dimensions in inches oop ia. olt oop End/ Coupler atch Coupler Spotwelds Nut (Type) Pin oop ia. Coupler *All dimensions in inches oop ia olt oop End Slotted/ atch Nut. Spotwelds (Type) 3 Pin oop ia *All dimensions in inches oop ia. olt EATON Aerospace Group TF April

4 Stainless Steel Engineering ata oop End Slotted/ Coupler atch Coupler Spotwelds Nut (Type). 3 Coupler Pin oop ia *All dimensions in inches oop ia Plain End/ atch Spotwelds (Type) Nut. All dimensions in Inches olt Plain End/ Coupler atch All dimensions in Inches Nut Coupler. Spotwelds (Type) Coupler olt EATON Aerospace Group TF April 2013

5 Ordering Information *Part Number Example: S Notes: Code: A,C, or = A286 bolt (In hundredth inches: 100=1.00 inch) Pad: = No Pad P =.060 Thick Cork-ubber Pad Per AMS-6841 (Example: P55OS) 1. Specify all widths in one of the following available sizes: 2300 series/52,62, 75, 88, 100, 112, 138, 150, 162, 175, 188, 200, 212, Series/75, 88, 100, 112, 125, 138, 150, 162, 175, 188, 200, 212, 225, 238, Specify all lengths in even.06 inch increments. For minimum lengths, see charts for specific part number. 3. When pad is specified, pad width will be same as strap width. * Order one of each assembly to make to make a complete strap unit or see ordering note on cover. (In hundredth inches: 100= 1.00 inch) Nut (See cover for coding) EATON Aerospace Group TF April

6 Weight ata Weight in Pounds Series Weight Graph Add weight factor from table below to values from chart 1 7/8 3/4 5/8 and Inches Weight in Pounds Series Weight Graph Add weight factor from table below to values from chart 1-1/2 1-3/8 1-1/4 1-1/8 1 7/8 3/4 and Inches in in Inches Inches in Inches in Inches Series Weight Factor ue to Component Hardware bs. Series Weight Factor ue to Component Hardware bs ; ; ; ; ; ; ; ; ; ; ; ; All weights are figured less pad. For weight assembly with pads, consult Eaton. 6 EATON Aerospace Group TF April 2013

8 Eaton Aerospace Group Fluid & Electrical istribution ivision 90 Clary Connector Eastanollee, Georgia Phone: (706) Fax: (706) Eaton Aerospace Group 9650 Jeronimo oad Irvine, California Phone: (949) Fax: (949) Copyright 2013 Eaton All ights eserved Copying or Editing is Forbidden Form No. TF100-27A (Supersedes AA33) April 2013

Manufacturing, Inc. Manual. Series I UT3030, UT5036, UT5042 & UT5052 (S/N KA1096A-) Rolling Spike Update Ultra-Till (Disc & Coulter)

Manufacturing, Inc. Manual. Series I UT3030, UT5036, UT5042 & UT5052 (S/N KA1096A-) Rolling Spike Update Ultra-Till (Disc & Coulter) Manual Series I UT3030, UT5036, UT5042 & UT5052 (S/N KA1096A-) Rolling Spike Update Ultra-Till (Disc & Coulter) Manufacturing, Inc.! Read the operator s manual entirely. When you see this symbol, the subsequent