OkseaTech Electronics Machinery & Defense Industry Ltd.

Transcription

1 OkseaTech Electronics Machinery & Defense Industry Ltd. Web: Page 1 of 85

2 Okseatech Electronic Machinery And Defense Industry Trade Limited Company has the capability of redesigning and manufacturing different diving systems according to customer's demand, Electronics Machinery & Defense Industry besides standard designs. Our products and services that meet all of our customer s current and future needs and needs at the highest possible level until the end user; With a lower cost, as soon as possible, with a solid and steadily improving quality system, our confidence in modern business management can be maintained with an ever increasing course. All pressure chambers and diving equipment are manufactured according to the following relevant international standards and regulations - ASME PVHO-1 - EN /23/EC (PED) - ASME SEC VII D /42 EEC - NFPA 99 - IMCA D023 - CE - TUV / BV / TL All produced chambers and diving equipment are certificated by TUV, Bureau VERITAS, or Lloyds Register depending on customers request.. info@okseatech.com Web: Page 2 of 85

3 OkseaTech products: 1. Multi-person HBO Oxygen Treatment Chambers 2. Mono-place HBO Oxygen Treatment Chambers 3. Diver decompression chamber 4. Transportable Decompression Chambers 5. Saturation Diving Systems 6. Personal Transfer Capsule (PTC) 7. Diving Bell Launch And Recovery Systems 8. Diver Stages - Wet Bell 9. Diver Stage Launch And Recovery Systems 10. Mixed Gas & Air Dive Control Panels 11. Mixed Gas & Air Storage rooms 12.Submarine Ventilation Systems 13.Submarine Escape Training Tower Containerized Systems: 14. Containerized Mobile Hyperbaric Chambers 15. Containerized Machinery & Technical Rooms 16. Containerized LARS & Dive Control Unit 17. Deck Transfer Lock (DTL) 18. Hyperbaric Life Boat 19. Dive Equipment & Tools info@okseatech.com Web: Page 3 of 85

4 1. Multi-person HBO Oxygen HBO Chambers for Hyperbaric treatment center Up to 16+2 person 5.5 bar Working Pressure 2. Mono-place Hyperbaric Oxygen Chamber Hyperbaric Oxygen Chamber for one person. 3. Diver Decompression Chamber Multi lock diver Decompression Chamber / 1800 / 2000 mm dia. 7.5 / 10 bar Working Pressure Multi Lock with NATO bayonet flange on the ante chamber. info@okseatech.com Web: Page 4 of 85

5 4. Transportable Decompression Chamber Transportable Hyperbaric Chamber for 1+1 Person. 5. Saturation Diving Systems Chambers used for deep diving and saturation operations Up to 44 (18+4 x 2 chamber) person 10 bar Working Pressure 5.5 bar Working Pressure Multi Lock with NATO standard bayonet flange on the ante chamber. 6. Personal Transfer Capsule (PTC) Used for deep diving operations or saturatin operations. Max. 350 msw operational depth and 4 person (3 Diver + 1 inside Tender) capacity info@okseatech.com Web: Page 5 of 85

6 7. Diving Bell Lunch and Recovery System Used for deep diving or saturation operations for PTC 8. Diver Stages - Wet Bell Used for Surface Supplied or SCUBA diving Up to 3+1 Diver capacity Max 130msw operational depth 9. Diver Stage Lunch and Recovery System Diving Stage and LARS used for Surface Supplied or SCUBA diving Up to 3+1 Diver capacity Max 125 msw operational depth info@okseatech.com Web: Page 6 of 85

7 10. Mixed Gas & Air Dive Control Panels Used for deep diving operations with Air & MixGas 11. Mixed Gas & Air Storage rooms The Surface Supplied diving operation, supply required gases to dive systems for deep diving operations. Bottom Mix Deco Mix Oxygen Breathing Air 12. Submarine Ventilation System Meets the Submarine interior breathing air demands without increasing the submarine inside pressure. Max working depth 620m Web: Page 7 of 85

8 13. Submarine Escape Training Tower Training and systems for escaping from a sunken submarine Up to 20 meter Depth 14. Containerized Mobile Hyperbaric Chambers Multi lock diver Decompression Chamber / 1800 mm dia. 7.5 / 10 bar Working Pressure Multi Lock with NATO standard bayonet flange on the ante chamber. 15. Machinery & Technical Containers Supply HP/LP breathing air and O2 for Diver Hyperbaric Chamber and Diving Station. Supply pressurized water for Diver Hyperbaric Chamber fire suppression system. Supply power for welding and hydraulic hand tools while diving operations. info@okseatech.com Web: Page 8 of 85

9 16. Containerized LARS & Dive Control Unit Diving Stage/Cage Launch And Recovery System has been specifically designed to give a compact operating footprint to minimise the deck space required on board. This system can be used at the depths exceeding 190 ft. 17. Deck Transfer Lock (DTL) With Pressurized flexible man ways, DTL provide interconnect between the rescues vehicles with adapter pipe spools mounted on the DTL. With NATO flange, DTL provide interconnect with mobile pressurized chamber. 18. Hyperbaric Life Boat The evacuation chamber, suitable for 12 divers at working pressures specified up to 400 metres of seawater, is accessible through a lock in the bottom of the lifeboat. info@okseatech.com Web: Page 9 of 85

10 19. Dive Equipment & Tools We supply a wide range of commercial diving equipment/ underwater diver tools including Hydraulic underwater Tools which are designed for underwater applications. We also supply Lift Bags, and Hydraulic Power Units. We also supply pneumatic underwater tools. info@okseatech.com Web: Page 10 of 85

11 1. MULTI-PERSON HBO OXYGEN CHAMBERS Our clinical hyperbaric chambers are all tailor made. The production is made according to TUV,ACME or BS. All The clinical hyperbaric chambers are a state of the art. We can built many variants which can accommodate from 6 to 16 patients in the main chamber and 2 in the ante chamber. The illumination is unique,the best in the market which gives 350 lux power light anywhere in the chamber. Communication and the climate control system are the most effective when compared the others. Fire safety with the new adapted sensors is highly reliable and effective. The fire fighting system which is made according to EN or NFPA 99 truly tested after each installation up to the maximum working pressure before the chamber interior finished. BIBS system is well designed for the elderly to breath easily under pressure. info@okseatech.com Web: Page 11 of 85

12 1. MULTI-PERSON HBO OXYGEN CHAMBERS SPECIFACITIONS; 1800 / 2000 / 2100 / 2200 mm Dia Chambers with omega shape All piping Equipment can be made from stainless steel compatible with oxygen Computerized control Option Fire detection sensors LED illumination outside and inside the chamber S/P telephone Effective silencers Chamber Climate control system Closed circuit TV Entertainment Multi gas selection option during treatments info@okseatech.com Web: Page 12 of 85

13 Oxygen, CO2 monitoring systems for chambers atmosphere control BIBS supply analizer CO2 scrubbers Medical Lock Medical Patient monitoring unit Chamber Control from inside (optional) Web: Page 13 of 85

14 2. MONO-PLACE HBO OXYGEN CHAMBERS SPECIFACITIONS; OkseaTech Monoplace Hyperbaric Oxygen Chambers produced for one person according to ASME PVHO standards. - Hatch Security System - Two way communication - Entertainment system - Climate system - Patient warning button - Mixed gas treatment possibility - BIBS option info@okseatech.com Web: Page 14 of 85

15 3. DIVER DECOMPRESSION CHAMBERS PRESSURE VESSEL EQUIPMENT Cylindrical pressure vessel, divided in main chamber and ante chamber Circular flat bottom door and walking door with fork hinges, spring- loaded pistons Supply lock with closure outside, flat door inside, equipped with safety devices and pressure gauge, for one-hand operation Observation windows, 250 mm, TV-windows, 75 mm cylinder wall Blind flange, free diameter 50 mm, blind leaf exchangeable formed. data lead through in MC Blind flange, free diameter 50 mm, blind leaf exchangeable formed. Data lead through in AC Hoisting eyes according to hoist standard (DIN 82024) Anti-slip floor in pairs (MC and AC), marine grade type and made of aluminum, easy to install and remove for cleaning Corrosion prevention and coat of varnish Web: Page 15 of 85

16 PRESSURE VESSEL EQUIPMENT Cylindrical pressure vessel, divided in main chamber and ante chamber Circular flat bottom door and walking door with fork hinges, spring- loaded pistons Supply lock with closure outside, flat door inside, equipped with safety devices and pressure gauge, for one-hand operation Observation windows, 250 mm, TV-windows, 75 mm cylinder wall Blind flange, free diameter 50 mm, blind leaf exchangeable formed. data lead through in MC Blind flange, free diameter 50 mm, blind leaf exchangeable formed. Data lead through in AC Hoisting eyes according to hoist standard (DIN 82024) Anti-slip floor in pairs (MC and AC), marine grade type and made of aluminum, easy to install and remove for cleaning Corrosion prevention and coat of varnish Several lead through for pipework and cables, NATO flange for mobile pressure chambers connection. Web: Page 16 of 85

17 Medical Lock Web: Page 17 of 85

18 MAIN CHAMBER EQUIPMENT Folding seats with back rest for maximum 4 seating persons or to be used for 2 sitting persons and one lying person, equipped with one set of upholstery for seats and back rest Loudspeaker and microphone of intercom system Sound powered telephone with howler Analog clock Button for emergency signal system Release button for spray-fog fire suppression system Caisson manometer Thermometer and humidity censor Set of silencers for air inlet and outlet Safety valve Spray-fog fire suppression system UV-detectors for alarm signal in case of sensing a spark or flame Portable fire extinguisher Inner painting (non-toxic, hardly inflammable) Anti-slip floor, easy to clean Set of quick coupling connection (BIBS) for serial masks or Head tents Scott serial masks Illumination units. info@okseatech.com Web: Page 18 of 85

19 ANTE-CHAMBER EQUIPMENT Folding seats with back rest for maximum 2 seating persons equipped with one set of upholstery for seats and back rest Loudspeaker and microphone of intercom system sound powered telephone Button for emergency signal system Release button for spray-fog fire suppression Caisson manometer Thermometer and humidity censor Set of quick coupling connection (BIBS) for serial masks or Head tents Scott serial masks Illumination units Set of silencers for air inlet and outlet. Spray-fog fire suppression system UV-detector for alarm signal in case of sensing an open name Portable fire extinguisher Inner painting (non-toxic, hardly inflammable) Anti-slip floor, easy to clean info@okseatech.com Web: Page 19 of 85

20 DIVER DECOMPRESSION CHAMBER CONTROL PANEL All chamber can be controlled by manually outside and inside. Tender can be controlled all function on control panel. If required, system can be manufactured with automatic control software, computer and OKSEA-VALVEs. Web: Page 20 of 85

21 4. TRANSPORTABLE DECOMPRESSION CHAMBERS Transportable Decompression chamber The transportable can be installed in an ISO standard container. OkseaTech is the designer of a small lightweight decompression chamber (TDC). This type of transportable decompression chamber is large enough to accommodate two people (one patient and one attendant). Due to its special shape and size, it is spacious enough to allow extended transportation or treatment times if necessary. Compact and lightweight, the TDC is ideal for transferring divers under pressure to a hyperbaric medical facility. It is fitted with a rotating STANAG male flange, which allows it to be connected to a large number of hyperbaric facilities. It is also possible to use adaption flanges to connect the DART to hyperbaric facilities using other connection flanges. info@okseatech.com Web: Page 21 of 85

22 The ACC is an additional chamber compartment, which can be used in combination with the TDC, allowing the attendant entry to the TDC. The ACC is provided with a special STANAG female flange, which makes it possible to link the TDC to the ACC, creating a two-compartment chamber. info@okseatech.com Web: Page 22 of 85

23 5. SATURATION DIVING SYSTEMS The most complex decompression chambers are the saturation chamber systems in the diving industry. Multiple compartment hyperbaric chamber complexes according to specific requirements can be designed and produced. All the chamber complexes can be manufactured according to ACME DNV Bureu Veritas, TUV or LLYODS manufacturing rules with GMP. These complexes may include multiple dry living chambers with medical locks up to any capacity that the customer requires, wet chambers, deck transfer locks, locks for personnel transfer capsules to perform personnel transfer under pressure. NATO bayonet flanges for the transportable divers decompression chambers. Any hatch design for the McCann bell, NSRS or SRDRS mating can be manufactured according to the international standards. The company has built a saturation system for the Turkish Navy which can accommodate 44 injured/saved submariners The system can mate to American or NATO standard rescue vehicles with two upper pressurized doors for the Deck transfer lock mating. It allows to transfer the bell diver and the divers into the wet chamber where the Personnel Transfer Lock is mating info@okseatech.com Web: Page 23 of 85

24 All the system has computer controlled dive ability which allows to apply any diving prophile while all the parameters of the chamber atmosphere is controlled. The system has all the mechanical control from outside control panel and also control from inside because of the military requirements. All the system has spray firefighting system which can be activated by means of push button from inside and outside also mechanical control from outside and inside as well. The Saturation Chamber Systems DESCRIPTION TECHNICAL INFORMATION Maximum Operating Pressure 10 Bar Hydrostatic Test Pressure 15 Bar Operating Temperature Range 0 C - 45 C Main Chamber Capacity/p Person Ante Chamber Capacity/p Person Inside Diameter 2100 mm Length 8900 ± 10 mm Material P355GH Pressure Steel Main Chamber Door Number 2 Horizontal Ante Chamber Door Number 3 Horizontal + 1 Vertical Main Chamber Space Ø 844 mm Ante Door Space (mm) Ø 1000, Ø 844, Ø 800 Visible Porthole Inside Diameter Ø 220 mm Main Chamber Volume 19,5 m3 Ante Chamber Volume 8,5 m3 Weight kg Connection Voltage 2 Phase, 230 Volt, 50 Hz Approving Authority Turkish Lloyd info@okseatech.com Web: Page 24 of 85

25 Web: Page 25 of 85

26 Web: Page 26 of 85

27 Web: Page 27 of 85

28 Electronics Machinery & Defense Industry All seats can be adjusted according to user needs during the operation. They can be used as seat or bed if desired. Web: Page 28 of 85

29 Electronics Machinery & Defense Industry 6. PERSONNEL TRANSFER CAPSULE (PTC) Personnel Transfer Capsules can be designed and built according to the customers need and the personnel to be carried. The saturation dives can be carried out up to depths of 400 fsw with the new delivered vessel TCG ALEMDAR to the Turkish Navy. The system meets the strict demanding criteria for the saturation dives. All trainings and tests were made by our company divers and trainers. The first PTC dive was handled from our company in Turkey with a 100msw depth by our company. info@okseatech.com Web: Page 29 of 85

30 Maximum Operation Depth 200msw (660ft.) Depth Rating 11 bar 100 msw (or up to 300 msw 30 bar) Hydrostatic Test Pressure 16 Bar (or up to 45 bar) Working Temperature -20 C - 50 C Volume 6.2 m 3 Gross Weight ~9,950 kg (Included Full Equipment and Divers) 3 Diver Internal Panel 1 x Bell Internal Color Video Camera 1 x Bell Carbon Dioxide Scrubber Normal Operation 1 x Bell Heater (Hot Water Unit) 3 x Bibs for Mixed Gas Diving or Nitrox Diving complete with Dump Bell/Diver Communication Systems Onboard Emergency Gas Cylinders Through Water Communications Internal and External Lights Bell Internal Depth and External Depth Gauges Emergency Bell Battery Pack Strobe Light PTC TECHNICAL INFORMATION 3 x Internal Umbilical Hangers The bottom door is a double acting castellated design with hydraulic actuation info@okseatech.com Web: Page 30 of 85

31 Umbilical The umbilical is made of: 1x3 4" non-collapse reclaim hose 2x3 4" hot water hoses 1x3 4" gas hose 1x1 2" gas hose 5x1 4" pneumo hoses 1 communication/video cable comprising: 7x1.34mm2 signal cores 4x75 ohm co-axial pairs individually screened 1.34mm2 twisted quads 14 individually screened 1.34mm2 twisted pairs Voids are filled with silicon rubber compound Adhesive impregnated polyester fiber braid All cores/pairs/quads are screened to avoid interferences 1 power cable comprising: 34 x 2.5mm2 plain copper power conductors A collective screen Voids are filled with silicon rubber compound Braided polyester fiber strength ropes Close weave polyethylene monofilament over-braid The outside diameter of the umbilical is 103mm. It has a weight of 95 kg/m in air and 20 kg/m in the seawater. info@okseatech.com Web: Page 31 of 85

32 Web: Page 32 of 85

33 Web: Page 33 of 85

34 7. DIVING BELL (PTC) LUNCH AND RECOVERY The PTC (Personnel transfer Capsule) LARS uses hydraulic winches powered by dedicated hydraulic power packs. The main winch is designed for handling the PTC either over the vessel side using an A frame. The guide wire system can also recover the PTC in the event of failure of its lift winch. A synchronised, constant tension umbilical winch automatically deploys and recovers the umbilical to follow the motion of the PTC The winches are operated from a dedicated dog house mounted directly on the winch skid, adjacent to the PTC for maximum operational visibility. info@okseatech.com Web: Page 34 of 85

35 Web: Page 35 of 85

36 8. DIVER STAGES - WET BELL Diving Stage/Cage has been specifically designed to give a compact operating in deep dive on board. This system can be used at the depths exceeding 130 meters. The systems completed and tested in real conditions for the Turkish Navy and systems are operational now. MAX. Working Depth Diver Capacity : 130 mt. : 3 Diver + 1 Stand by Diver info@okseatech.com Web: Page 36 of 85

37 The complete system of the Wet bell will be certified by DNV GL GL. The following guidance codes and standards are used for the design and manufacturing of the Wet bell: IMCA D014: International Code of Practice for Offshore Diving IMCA D023: DESIGN - Diving Equipment Systems Inspec tion Guidance Note for Surface Orientated (Air) Diving Systems (Rev. I - January 2014) IMCA D030: Surface Supplied Mixed Gas Diving Operations IMCA D037: Design for Surface Supplied Mixed Gas Diving Equipment info@okseatech.com Web: Page 37 of 85

38 Main Wet bell umbilical of 140 meter is spiral wound with a polypropylene outer braid, and comprises the following: - 1/4 Pneumo Hose (4 pcs.) - 3/8 Gas Supply hose (4 pcs.) - 1/2 Hot water hose (1 pc.) Communications, camera, data signals and power cables info@okseatech.com Web: Page 38 of 85

39 9. DIVER LUNCH AND RECOVERY SYSTEM Spefications: Diver Lunch and Recovery System (LARS) skid mounted Capacity Designed to accommodate 3 persons: 2 divers and 1 standby diver (bell man) Depth / length of wires Max. Working depth: ± 130 msw Wet bell lifting: ± 140 msw Clump lifting: ± 280 m Safe working load Wet bell: ± 2,230 kg (per diver 150 kg) Bell winch: ± 3,345 kg continuous Clump winch: ± 1,415 kg continuous info@okseatech.com Web: Page 39 of 85

40 Dimensions Bell weight in air Dimensions Safety Wet bell inside diameter: ± 1,600 mm Clear openings (W x H) ± 1,900 kg ± 900 x 1,150 mm Wet bell & skid Length (transport): ± 6,000 mm Length (operation): ± 6,750 mm Width: ± 2,440 mm Height: ± 4,227 mm Weight: ± 11,300 kg Wet bell base frame skid: 20 ft container Safety chain is provided across the sea side of the A-frame platform and is clipped in position after launching. A safety rail is provided on the inside of the rams to prevent accidental damage from recovering the Wet bell. info@okseatech.com Web: Page 40 of 85

41 Web: Page 41 of 85

42 10. MIXGAS & AIR DIVE CONTROL PANELS Diving control panel is designed for OBB divers and 1 standby diver at different depth and breathing different gas for standby. The system can supply the diver communication boxes which have connections to the divers umbilical for air supply, hot water, communication, camera, illumination located on both starboard or pier side of the ship. info@okseatech.com Web: Page 42 of 85

43 The main features of the system are broken down as follows - The panel accommodates 3 different diving gases plus HP air and LP air - Each line has two separate regulators to backup each other. - Monitoring and saving the images come from the divers cameras. - Supplies energy to OBB - Communications with helium speech unscrambles. - The welding machines can be operated from the diving panel (Optional) - OBB, SDC and RCC can be operated from the Diving Panel with air supply/ exhaust, communication, illumination etc. (Optional) info@okseatech.com Web: Page 43 of 85

44 11. MIXGAS & AIR STORAGE ROOMS The Gas Handling system can be divided in 3 parts: the gas panels, the permanent gas storage and the gas transfer system. It is designed according to the following assumptions: Gas panels A set of panels and manifolds adequately located throughout the system allow to carry out the routine tasks of gas handling, mix selection storage, containers collection, onboard reserves filling, distribution to SDC and RCC control panels, O2 pressure regulation. info@okseatech.com Web: Page 44 of 85

45 Permanent gas storage The gas storage will be detailed according to the customer requirements. The total volume depends on the diving system operations which the customer specified. Web: Page 45 of 85

46 Web: Page 46 of 85

47 Mixed Gas System designed for the demands of Deep Diving Operations with Mixed Gas, Deep Water Diving Operations with Personnel Transfer Capsule, treatments to be applied on Hyperbaric Chamber.and Oxygen and Decompression (SurDO2) applications in water. In the context of the Mixed Gas System; - Bottom Mixture Cylinders - Decompression Mixture Cylinders - Respiratory (Medical) Oxygen Cylinder - Pure Helium Gas Cylinders Or the customers demands for boosting every mixture info@okseatech.com Web: Page 47 of 86

48 Gas transfer system As for the gas storage, the gas transfer system is : The system is composed of: Two H.P. compressors: suitable for breathable air and HELIOX (O2 content lower than 25%), output pressure: 200 bar max Two gas panels Two O2 analyzer with alarm to read area atmosphere Complete filtration system info@okseatech.com Web: Page 48 of 85

49 12. SUBMARINE VENTILATION SYSTEMS This is the only system proven that can achieve required ventilation at the depths exceeding 620 meters during the sea tests. Three systems completed and tested in real conditions for the Turkish Navy and all are operational now. Web: Page 49 of 85

50 Electronics Machinery & Defense Industry The system has the following units; Hydraulic operated, LARS (Launch & Recovery System), Weight winch, Hose drum,ventilation hose (900 meters), Computerized local and remote operating control from the diving station, Air Supply and control unit, Exhaust control unit,vacuum Unit, The system can be controlled Fully automatic by selecting the required ventilating amounts of air, Semi automatic from the ventilation computer, Semi automatic desaturation mode is possible as well, Manual control also possible by means of the valves, the spare, sensors, transmitters and gauges, The system is capable to ventilate a submarine without increasing the internal pressure, Nearly 500 m3/h air ventilation per hour can be achieved and continued from days to weeks. info@okseatech.com Web: Page 50 of 85

51 The Ø2100mm driving winch, driven by a hydraulic motor. It is installed directly in line with the bell axis and next to the main winch. The umbilical is hanged on the A-frame by a 1 4-circular roller conveyor. The winch is fitted with a device to ensure adherence of the umbilical and is controlled from the handling console. Once on the deck, the umbilical is stored in an winch drum. The umbilical, being driven back to the deck. info@okseatech.com Web: Page 51 of 85

52 The umbilical can be connected to the submarine easily with Diver, ROV or ADS. Web: Page 52 of 85

53 13. SUBMARINE ESCAPE TRAINING TOWER The most scary scenario for the submariners is probability of couldn't come to surface again because of any reason. There is only one chance to survive without decompression sickness. In this case Submariners should escape from dissub Today all kind of submarines are equipped with escape Tower and compartment, for free escape purpose in emergency. Web: Page 53 of 85

54 TURKISH NAVY FREE ESCAPE TOWER (GOLCUK NAVY BASE) A Submarine Escape Training Tower is part of a facility used for training submariners in methods of emergency escape from a disabled submarine. It is a tall cylinder filled with water with several entrances at varying depths each simulating an airlock in a submarine. Training of submarine escape training tower is handled by our former Turkish Navy s submarine escape training tower instructors. info@okseatech.com Web: Page 54 of 85

55 TURKISH NAVY ESCAPE TOWER TRAINING TANK Web: Page 55 of 85

56 Web: Page 56 of 85

57 Web: Page 57 of 85

58 Web: Page 58 of 85

59 Free escape exercise from the distress submarine in 2018 (TCG Alemdar) Web: Page 59 of 85

60 14. CONTAINERIZED MOBIL HYPERBARIC CHAMBERS Chambers can be mounted on the containers instead of mounting on a fixed area over ships or land. Chambers are produced for especially for diving companies, It is very easy to transport with container to different work sites for deep diving operations. The chambers are manufactured according to IMCA standards and included all required equipment. info@okseatech.com Web: Page 60 of 85

61 20 CONTAINERIZED MOBIL HYPERBARIC CHAMBER Internal Length : 5.9m Internal Height : 2.39m Interbal Width : 2.35 Door Opening Height : 2.28m Door Opening Width : 2.34m The chamber OKSEA-DIVE 1600/10 is a two-lock ch amber used for HBO operations up to 2 bar Hyperbaric therapy with air (up to 5 bar) or MixGas up to 10 bar Divers tests and medical tests 4 person in sitting position in the main chamber and 2 person in sitting position in the ante chamber. All important control functions can be carried out from a OKSEA-DIVE Controller on control station for the pressure chamber system. info@okseatech.com Web: Page 61 of 85

62 Web: Page 62 of 85

63 Web: Page 63 of 85

64 15. CONTAINERIZED MACHINERY & TECHNICAL ROOMS 20 Machinery Container Dimensions Internal Length : 5.9m Internal Height : 2.39m Internal Width : 2.35 Door Opening Height : 2.28m Door Opening Width : 2.34m FUNCTIONAL DESCRIPTION Supply all required HP/LP breathing air, O2 and mixed gases for Chamber and Diving Station. Supply pressurized water for Diver Hyperbaric Chamber fire suppression system, Supply power for welding and hydraulic hand tools while diving operations. info@okseatech.com Web: Page 64 of 85

65 Machinery Container Equipment: 1 Ea. LP Air Compressor, 1 Ea. HP Air Compressor, LP Air Tank HP Air, Oxygen and MixGas cylinder Racks Chamber fire suppression system, Container Air Condition Unit (Optional) Underwater Welding & cutting unit (Optional) Hydraulic Power Pack (Optional) info@okseatech.com Web: Page 65 of 85

66 Web: Page 66 of 85

67 Web: Page 67 of 85

68 16. Containerized LARS & Dive Control Panel Dive Control Panel and Diver stages with LARS system can be installed on 20 Container for more mobility for Dive companies and commercial divers. Diver stage and LARS can be transport easily with Mobil Decompression chamber Container and Machinery Container to different work sites for deep diving operations. All dive systems are manufactured according to IMCA standards included all required equipment and certification. Web: Page 68 of 85

69 Operator and Diving Supervisor can be manage to deep dives in the container without effected from weather conditions and environmental noise. This gives more comfortable and safe operation for dive teams. Operator can be controlled dive control panel and Diver LARS system at the same time according to order of diving supervisor. All required air and gas supply connected from Machinery container with HP & LP flexible Hoses. Web: Page 69 of 85

70 Diver umbilicals can be store on the side of container wall. This special compartment gives easy use and best protection for umbilical during the dive operation and transportation. This compartment can be close with special louvered door. Web: Page 70 of 85

71 Web: Page 71 of 85

72 17. DECK TRANSFER LOCK (DTL) With Pressurized flexible man ways, DTL provide interconnect between the rescues vehicles with adapter pipe spools mounted on the DTL. With NATO flange, DTL provide interconnect with mobile pressurized chamber. The DTL is designed to be portable and can be installed when a rescue system is mobilized on board. It is connected via a vertical pressurized trunk to the SABOS below deck. The DTL has two positions on the deck of the MOSHIP; one position for the SRDRS, and one for the NSRS The DTL consists of preassembled modules with minimal interconnects to allow testing prior to ship installation, simplified shipboard installation, and to ensure minimal disruption of other ship fabrication activities. info@okseatech.com Web: Page 72 of 85

73 Web: Page 73 of 85

74 The Control Console and Support Equipment are located over the DTL rack. Control of the pressurization to the flexible man ways that are provided with the SRDRS and NSRS is done on deck. Inside the DTL is a stretcher handling system to allow injured personnel to be transferred vertically down into the SABOS. There are two layers inside the DTL for operating, connected with fixed ladder. There is a shower for cleaning the injured persons before SABOS transfer. The fire extinguishing system can be operated from inside the DTL, outside the DTL manually and electrically. The CCTV system is mounted for visual control whiles the operation. CO2 scrubber can handle 4 persons breathing demands if the operator can t ventilate the system. Heating and Cooling System can climate the DTL while operation. There are 4 BIBS system mounted in DTL. DTL can be operated from the console and inside DTL (from both layers) with two-way inlet and exhaust system. The level of O2, CO2, temperature and humidity can be screened with the analyzers and sensors settled on the console The communication between DTL and the console managed with electrical communication system and sound powered phone system. The dirty water collected bottom of the DTL can be exhausted manually by the panel operator. info@okseatech.com Web: Page 74 of 85

75 Web: Page 75 of 85

76 Web: Page 76 of 85

77 Web: Page 77 of 85

78 18. HYPERBARIC LIFE BOAT It is mandatory for Diving Support Vessels (DSV) to be equipped with adequate and dedicated safety equipment to allow for the evacuation of divers under pressure in life-threatening situations. The principle of the SPHL is the installation of an independent autonomous saturation system chamber, i.e. a saturation diving evacuation chamber, in a standard self-propelled and SOLAS-approved GRP hull that is otherwise normally equipped with a propulsion system, cooling system, hot water plant, navigation control and monitoring equipment, food/water supply and medical aid kits. The evacuation chamber, suitable for 12 divers at working pressures specified up to 400 metres of seawater, is accessible through a lock in the bottom of the lifeboat. This lock normally connects the SPHL to the vessel s saturation diving chamber system and is kept under system pressure to allow immediate deployment. info@okseatech.com Web: Page 78 of 85

79 Web: Page 79 of 85

80 Self-propelled hyperbaric lifeboat Classification Society Designcode NDT Corrosion Allowance CE Marking 12 persons Det Norske Veritas (D.N.V.) approved according to the latest SOLAS/LSA Regulations - EN : 2011, Unfired pressure vessels part 3 : design - DNV GL-OS-E402, Offshore standard for diving systems sec. 3, B303, B304, sec 7 DNV GL-OS- E305, Rules for certification and verification of diving systems - DNV GL-RP-E403, Recommended practice sec. 7, B % X-ray 0 mm PED2014/68/EU Code Calculations EN Manufacturing Tolerances EN Design Temperature -10 / +55 C Design Pressure Hydrostatic Test Pressure Testpressure under mixed gas/helium Maximum Diving operation depth Maximum Life-support time in unit Weight of Decompression vessel Weight of Decompression vessel filled with water Construction hull/canopy 31.4 bar 47.1 bar 31.4 bar 300 msw 72 hours 3,200 kg 11,600 kg Fire retardant Glass Fibre Reinforced Polyester info@okseatech.com Web: Page 80 of 85

81 Type Number canopy Dimensions (LxWxH) Weight (empty) Release Hook Hook Distance Total Davit Load Maximum Capacity Colour SSC95/12HL 9.5 m x 3.6 m x 3.5 m 16,000 kg 12.3 TN Safe launch each 8.70 m 18,000 kg 12 divers / 4 crew Safety Orange info@okseatech.com Web: Page 81 of 85

82 19. Dive Equipment & Tools We supply a wide range of commercial diving equipment / underwater diver tools including Hydraulic underwater Tools which are designed for underwater applications. We also supply Lift Bags, and Hydraulic Power Units. We also supply pneumatic underwater tools. Oksea-Video ; Diver Camera recoder system for 3 divers. Oksea-Phone; Diver phone for 3 divers. info@okseatech.com Web: Page 82 of 85

83 Oksea-Dive Panel; Portable Dive Control Panel For 3 Divers (up to 190 ft) compliant with IMCA standards. info@okseatech.com Web: Page 83 of 85

84 Dive Equipment; We supply a wide range of commercial diving equipment, - Dive Helmets - Dive Suits (Dry, Semi-Dry and wet) - Dive Harness - Umbilicals - Regulators - Fins - Cylinders - Mask - Boot - Knifes - Hood and Glove Dive Tools; all diver underwater tools, - Cutting and Welding Equipment - Diver Hot Water Machines - Hydraulic Power Units - Hydraulic Tools - Hydraulic Hoses - Underwater Cameras - Underwater Lights - Lift Bags Please contact with OkseaTech for more product information. info@okseatech.com Web: Page 84 of 85

85 Web: Page 85 of 85