Rock Augers TECHNICAL INFORMATION:
|
|
- Cory Cooper
- 6 years ago
- Views:
Transcription
1 AUGERS
2 Four Star Global Equipment offers a wide range of rock augers for piling in various soil conditions and to meet the requirements of different designs of large diameter piles. Our Rock are designed to drill large diameter piles in sedimentary siliceous rocks. Four Star Global Equipment Rock are available with double start and single start flights, for any diameter to drill with or without casing protection and according to customers special requirements. Each auger type is available in 3 models: SHD (Super Heavy Duty): Recommended for piling rigs equipped with rotary torque over 22 tons and for large diameter piles. HD (Heavy Duty): Designed for medium torque rotary rigs. S (Standard): Suitable for limited torque rotary rigs. Rock The rock augers Four Star Global Equipment provides are designed by an engineering and research department with experienced technicians and engineers, while the production is performed by skilled technicians operating with very advanced tooling machineries. They have achieved ISO 9001 ISO quality certificates in order to guarantee the quality and reliability of products and ser vices to the customers. 2
3 Rock ER SHD 1. Blades in Hardox HB Picks Ø 30 / 38 mm (1.2 / 1.5 ) 3. Collar plate reinforcement 4. Flights 1. Blades in Hardox HB Picks Ø 25.4 mm (1 ) 3. Flights ER HD Blades: in Hardox HB400 Thickness = 70mm (2.8 ) Equipment: picks Ø 30 / 38mm (1.2 / 1.5 ) Collar plates equipped with picks Ø 30 / 38mm (1.2 / 1.5 ) Pilot bit: with picks or with blade in special steel Ni-Cr-Mo Thickness = 25 / 40mm (1 / 1.6 ) Blades: in Hardox HB400 Equipment: picks Ø 25.4mm (1 ) Pilot bit: with picks or with blade in special steel Ni-Cr-Mo 3
4 Rock ER S Blades: in ASTM 516/70 Equipment: picks Ø 25.4mm (1 ) Pilot bit: with picks or with blade in special steel 4
5 Conical Rock ERC SHD 1. Picks Ø 30 / 38 mm (1.2 / 1.5 ) 2. Flights 1. Picks Ø 25.4 mm (1 ) 2. Flights ERC HD Equipment: picks Ø 30 / 38mm (1.2 / 1.5 ) Pilot bit: with picks or with blade in special steel Ni-Cr-Mo Equipment: picks Ø 25.4mm (1 ) Pilot bit: with picks or with blade in special steel Ni-Cr-Mo 5
6 Conical Rock ERC S Equipment: picks Ø 25.4mm (1 ) Pilot bit: with picks or with blade in special steel 6
7 Soil Four Star Global Equipment offers a wide range of soil augers for piling in various soil conditions and to meet the requirements of different designs of large diameter piles. Our Soil are designed to drill large diameter piles in high density sand and gravel. Four Star Global Equipment Soil are available with double start and single start flights, for any diameter to drill with or without casing protection and according to customers special requirements. Each auger type is available in 3 models: SHD (Super Heavy Duty): Recommended for piling rigs equipped with rotary torque over 22 tons and for large diameter piles. HD (Heavy Duty): Designed for medium torque rotary rigs. S (Standard): Suitable for limited torque rotary rigs. The soil augers Four Star Global Equipment provides are designed by an engineering and research department with experienced technicians and engineers, while the production is performed by skilled technicians operating with very advanced tooling machineries. They have achieved ISO 9001 ISO quality certificates in order to guarantee the quality and reliability of products and ser vices to the customers. 7
8 Soil ET SHD 1. Blades in Hardox HB Teeth 3. Collar plate reinforcement 4. Flights 1. Blades in Hardox HB Teeth 3. Flights ET HD Blades: in Hardox HB400 Thickness = 40mm (1.6 ) Equipment: Esco-CAT teeth others teeth on request Collar plates equipped with picks Ø 30 / 38mm (1.2 / 1.5 ) Pilot bit: with picks or with blade in special steel Ni-Cr-Mo Thickness = 25 / 40mm (1 / 1.6 ) Blades: in Hardox HB400 Equipment: Esco-CAT teeth others teeth on request Pilot bit: with picks or with blade in special steel 8
9 Soil ET S Blades: in Hardox HB400 Equipment: Esco-CAT teeth Pilot bit: with picks or with blade in special steel 9
10 10 P.O. Box 865 Montgomery, TX
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationVSL MINING & TUNNELING SYSTEMS VSL. mining and tunneling
VSL MINING & TUNNELING SYSTEMS VSL mining and tunneling VSL Mining & Tunneling Bolt systems VSL offers three type of bolting system for the mining & Tunnelling industry VSL-S Solid Threaded bolts. Continuous
More informationReverse Circulation Drilling Rig
BUILT ON BUILT TRUST ON BUMA Reverse Circulation Drilling Rig 02. www.bumace.com COMPANY BUMA CE is a leading manufacturer and supplier of foundation equipment in Korea. Since the company was built in
More informationIntroduction of world construction methods and trends. Franz-Werner Gerressen, Head of Method Development, Tokyo,
Introduction of world construction methods and trends Franz-Werner Gerressen, Head of Method Development, Tokyo, 2017-11-29 1 Introduction of world construction methods and trends Outline Single Pass Piling
More informationSPOKES & NIPPLES FOR BICYCLE 2017
SPOKES & NIPPLES FOR BICYCLE 2017 HISTORY AND PRESENT Based in Lomagna, in the heart of Lombardy, Alpina Raggi S.p.A. was founded in 1926 and focusses its activity on the production of spokes and nipples.
More informationContent Technical Data R R38 7-8
http://www.maxdrill.com.cn Content Technical Data R25 4 R32 5-6 R38 7-8 R51 9 T76 10 1 GUIDE OF PRODUCT CODE : Bit:25 M R 30 0 42 http://www.maxdrill.com.cn A B C D E F A Connect size 25 32 38 51 76 B
More informationSelf-drilling hollow anchor bolts and accessories
Self-drilling hollow anchor bolts and accessories Application During the constructions of underground works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground
More informationh o l l o w poles for foundat i o n s
TTT Products Limited Feb 2016. 1 of 6 The MultiPole advantage Introducing the TTT MultiPole an incredibly versatile pole due to its unique hollow core. The MultiPole is a multifunctional pole suitable
More informationRef GAS WAFER BUTTERFLY VALVE. Model/Ref:
Model/Ref: 1141 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 200 mm Between ISO PN10/16 and ANSI150 flanges - 20 C + 60 C Max Pressure : 5 Bars Specifications
More informationh o l l o w poles for foundat i o n s
TTT Products Limited July 2017. 1 of 6 The MultiPole advantage The TTT MultiPole is an incredibly versatile pole due to its unique hollow core. The MultiPole is a multifunctional pole suitable for structural
More informationindoor / outdoor INSTALLATION GUIDE
indoor / outdoor INSTALLATION GUIDE TEQBALL ONE INSTALLATION GUIDE This document contains a description of the Teqball One multifunctional sports equipment installation. This guide recommends using specific
More informationPUSH PIER SYSTEMS STABILITY. SECURITY. INTEGRITY. Push Pier Systems PN #MBPPT
PUSH PIER SYSTEMS STABILITY. SECURITY. INTEGRITY. PN #MBPPT Push Pier Systems About Foundation Supportworks is a network of the most experienced and knowledgeable foundation repair and new construction
More informationNew Drilling Tools for Hard Rock Nordic Geotechnical Meeting 2012, Copenhagen
Nordic Geotechnical Meeting 2012, Copenhagen Gordian Ulrich Product Management Nordic Geotechnical Meeting 2012, Copenhagen 1. Commonly used tools for rock 2. Introduction of the Multi Hammer Tool (MHD)
More informationPerched Box Caisson Overview. January 2014
Perched Box Caisson Overview January 2014 Why perched box caissons? Perched box caissons are used to construct the portion of the river piers that will support the steel arch spans Construction can occur
More informationAnchor Component Material Standard Mechanical Properties
SECTION 4.1 PAGE 1 / 5 l description The UCAN sleeve anchor is a light-medium duty anchor ideal for applications in concrete, hollow block and brick. It is a mechanical expansion anchor assembled with
More informationDEADBOLTS - SOLID BRASS
DEADBOLTS - SOLID BRASS Regular Style Deadbolt 13 8" 23 8" Dia. 21 2" Dia. Exterior Trim (8450) Projection is ₁₃ 16" 8350 same on both sides Available Extension Collar for Thin Doors Interior Trim (8450)
More informationSelf Drilling Anchor System
Self Drilling Anchor System Processing Images SDAS Self Drilling Anchor System NUT PLATE COUPLER ANCHOR ROD BIT Application Self drilling anchor system is mainly used in slope stabilization, tunneling
More informationCable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJL 250 body. Reinforced lug for DN200 :
Reinforced lug for DN200 : Size : Ends : Min Temperature : Max Temperature : DN 50 to 200 mm Between flanges ISO PN10/16 ( PN10 for DN200 ) - 10 C + 110 C Max Pressure : 10 Bars Specifications : Long neck
More informationAGRI-VAC HIGH PERFORMANCE PNEUMATIC GRAIN MOVING UNITS
AGRI-VAC HIGH PERFORMANCE PNEUMATIC GRAIN MOVING UNITS The only system you ll ever need. Gives one person total grain-handling capability! Do it all with the Walinga Agri-Vac. Fill or empty any storage
More informationFP McCann Tunnels and Shafts 1
FP M c Cann FP McCann Tunnels and Shafts 1 The McCann range of shaft and tunnel products have been developed to meet the requirements of the latest industry standards which include the British Tunnelling
More informationCONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
More informationCIA-EA Technical Data Sheet
Description Our CIA-EA Epoxy Acrylate adhesive anchor system has been specially formulated as a high-performance, two component adhesive anchor system for threaded bars in uncracked concrete. Base Material
More informationComposite Pilings. For A Lasting Foundation
Composite Pilings For A Lasting Foundation Product Overview Fortress Pilings are fully composite piles comprised of structural fiberglass protected by a premium gel coat finish. Fortress Pilings outperform
More informationAUTOMATED MONITORING EQUIPMENT FOR ACIP AND DD PILES
AUTOMATED MONITORING EQUIPMENT FOR ACIP AND DD PILES Presented by: W. Morgan NeSmith, P.E. Berkel & Company Contractors Inc. 770.941.5100 mnesmith@berkelapg.com ANNUAL KANSAS CITY SPECIALTY GEOTECHNICAL
More informationDesign Data 22M. Flotation of Circular Concrete Pipe. w w I = w - x 1000 (3) (SG x 1000)
Design Data M Flotation of Circular Concrete Pipe There are several installation conditions where there is the possibility that concrete pipe may float even though the density of concrete is approximately.4
More informationHighbond anchor FHB II-A S
Highbond anchor FHB II-A S The best performance in cracked concrete with the least installation effort VERSIONS APPROVALS zinc-plated steel stainless steel high corrosion-resistant steel ADVANTAGES BUILDING
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationCivil Application Solutions
Civil Application Solutions Features - Chiseled Cutting Edges - Increased Surface Area - Lateral Direction Guide Ribs Benefits - Faster Installation and Penetrates Harder Soils - Quicker Loading, Stronger
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationNew MacLean-Dixie 3-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications
Page: 1 of 6 New MacLean-Dixie 3-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications ICC AC358 Acceptance Criteria for Foundation Systems and Devices APPLICATION
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationDesign and Finite Element Analysis of Fabricated Panama chock with 225T capacity
LOWER HULL TOP DEC K EL. 3 1 ' - 2 " AB L [ 9 5 0 0 ] ( E) AIR DUC T ( INB D) ( E) B HD 1 4 m m `AH' ( E) PL. 1 2 m m `AH' ( E) L 1 5 0 x9 0 x1 2 m m `AH' - DO- - DO- SMIT BRACKET PANAMA CHOCK International
More informationAVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST REVISED 9/1/17 (per AVM Student Handbook) Tools are not needed the first day of class but are required by the second semester of class. TOOLS Under our
More informationLANDING LEG HARDWARE Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto.
Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto 904.696.0010 www.buffersusa.com Sand Shoes (Low- & High-Profile) Low-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More information1) INTRODUCTION 2) THE UNFAIR ADVANTAGE
1 1) INTRODUCTION 2) THE UNFAIR ADVANTAGE and Stingray earth anchors are driven tipping plate soil anchors for reaction of tensile loads. anchors have ultimate capacities up to 20 tons, and Stingray anchors
More informationSelf Drilling Anchor System
Self Drilling Anchor System SDAS Self Drilling Anchor System NUT PLATE COUPLER ANCHOR ROD BIT Application Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations
More informationpipe connectors. General description of pipe connectors Development/Design Purpose Versions
Pipe connectors General description of pipe connectors 1 STFLEX pipe connectors, just like STFLEX rubber expansion joints, have been used for more than years as the preferred connection elements in appliance
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationEngineered solutions for complex pressure situations
SPECIAL SERVICES Engineered solutions for complex pressure situations Cudd Energy Services (CES) delivers custom engineered solutions to resolve complex pressure situations resulting from equipment failure
More informationTZ WEDGE ANCHOR FOR CRACKED AND UNCRACKED CONCRETE
www.ucanfast.com TECHNICAL MANUAL SECTION 2.2 PAGE 1 / 10 ä DESCRIPTION UCAN TZ torque controlled mechanical expansion wedge anchors have a Category 1 classification. They are used to resist static, wind
More informationPull Handles & Push Plates General hardware
Pull Handles & Push Plates General hardware The Legge range of push and pull plates are ideally suited to heavy duty applications such as hospitals, schools and high usage public facilities. The products
More informationOPERATOR S MANUAL SPREADER. CSS, VNQ [For Combine Harvester AW82V] Original instructions
OPERATOR S MANUAL SPREADER CSS, VNQ [For Combine Harvester AW82V] en Original instructions Introduction Introduction Please read this operator s manual before using your spreader. We would first like to
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationPILING RIGS DRILLING RIGS
PILING RIGS DRILLING RIGS PRODUCT range An introduction to Dieseko Group Foundation Equipment Established in1974, Dieseko Group represents several brands in the foundation equipment industry, in four product
More informationThe OCV Series 8000 float control valves are designed to maintain a SERIES FEATURES
The OCV Series 8000 float control valves are designed to maintain a desired level in a tank or reservoir by opening for filling the tank when fluid is below the high level point and closing tightly when
More informationParts Manual (EN) COMMERCIAL CLEANING EQUIPMENT MODELS: 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE
COMMERCIAL CLEANING EQUIPMENT MODELS: Parts Manual (EN) 20'' DISK 26'' DISK 28'' DISK 24'' EDGE 28'' EDGE Read the Operators Manual before using the machine. Read the Safety Messages before servicing machine.
More informationHot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
More informationREPORT GEO-TECHNICAL INVESTIGATION FOR THE PROPOSED BLOCK-7 SUB-STATION SY NO-225, NEAR RAYACHERLU VILLAGE
REPORT ON GEO-TECHNICAL INVESTIGATION FOR THE PROPOSED BLOCK-7 SUB-STATION SY NO-225, NEAR RAYACHERLU VILLAGE CLIENT: KARNATAKA SOLAR POWER DEVELOPMENT CORPORATION BANGALORE 0 GEO-TECHNICAL INVESTIGATION
More informationPrecision Escalator Products, Inc. O & K ESCALATORS TABLE OF CONTENTS
Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 O & K ESCALATORS TABLE OF CONTENTS COMB PLATES PAGE 2 ROLLERS
More informationDDS TECHNOLOGY MARKER SYSTEMS
DDS TECHNOLOGY MARKER SYSTEMS G.A. Valves Sales Limited - P.O.Box 5, Brighouse, West Yorkshire HD6 3UD Tel:- 01484711983 Fax:- 01484719848 email :- sales@gavalves.co.uk DRIVE IN MARKER POSTS High density
More informationSeldén offer a full range of spinnaker equipment for keelboats. It consists of five aluminium pole sections, three carbon fibre sections, low weight
56 Seldén offer a full range of spinnaker equipment for keelboats. It consists of five aluminium pole sections, three carbon fibre sections, low weight composite end fittings, telescopic whisker poles,
More informationREPORT GEO-TECHNICAL INVESTIGATION FOR THE PROPOSED BLOCK-1 SUB-STATION SY NO-44, NEAR KYATAGANACHERLU VILLAGE
REPORT ON GEO-TECHNICAL INVESTIGATION FOR THE PROPOSED BLOCK-1 SUB-STATION SY NO-44, NEAR KYATAGANACHERLU VILLAGE CLIENT: KARNATAKA SOLAR POWER DEVELOPMENT CORPORATION BANGALORE 0 GEO-TECHNICAL INVESTIGATION
More informationl DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
More informationConstitution Instructions
Constitution Instructions This kit will build a 1:48 scale hull for the USS Constitution frigate. The kit contains the following parts. 1/8 deck with laser etched deck lines 1/8 railing Ribs Center keel
More informationWEDGE-ALL Wedge Anchors
WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity
More informationHardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
More informationdumont Minute Man Broaches
Catalog K dumont Minute Man Broaches Standard and Special Broaches Keyway Broaches and Sets Internal Hole and Surface Broaches The dumont Company, Greenfield, Massachusetts www.dumont.com The dumont Company
More informationDivision of Environmental Quality Wellhead Protection Section
Division of Environmental Quality Wellhead Protection Section 1 10 CSR 23-3.110 Plugging of Wells Any well which is to be abandoned must be plugged in accordance with these rules. If a well has been determined
More informationNew MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications
Page: 1 of 6 New MacLean-Dixie 4-1/2 Strength Squared Pipe Piles/Anchors (Patent Pending) for Compression and Tension Applications P45 Series 4-1/2 (O.D.) Schedule 40 Pipe Pile Torque Capacity (ft-lbs)
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Quick Star offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationdrilltech land drilling pipelining B y W i r e r o p e i n d u s t r i e s
offshore production drilltech offshore drilling land drilling pipelining 004-14-201-WR203-06/00 Printed in Canada on Recycled Paper cushion 6 cushion 6 ropes For drilling applications The oil and gas industry
More informationHDX HDAR HDXP HDBT HDPV HDSE
HD S E R I E S The Meyer Heavy-Duty Series airlock valves provide maximum versatility in the most severe applications. Each model offers an engineered cost effective solution to the customers needs. These
More informationMaterials : Forged carbon steel A105N
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Socket Welding -29 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising stem (OS&Y) Welded bonnet Full bore
More informationMaterials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
More informationMechanical Anchoring Systems HDA Undercut Anchor Product description. HDA-P Undercut Anchor Pre-Set Type
Mechanical Anchoring Systems 3.3 3.3.1 HDA Undercut Anchor 3.3.1.1 Product description The Hilti HDA undercut anchor is a heavy-duty mechanical anchor with carbide-tipped undercut segments used to perform
More informationPTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3
The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationSOIL ANCHORS ETSAB/UPC J.Llorens - ETSAB/UPC PASSIVE ANCHORS - ANTECEDENTS
SOIL ANCHORS ignasi.llorens@upc.edu ETSAB/UPC - 2013 PASSIVE ANCHORS - ANTECEDENTS Antecedents of passive anchors can be found in Nature. Roots feed plants and provide uplift resistance against the wind
More informationOrifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC
Flow measurement Orifice plate, model FLC-OP Orifice flange, model FLC-FL Annular chamber, model FLC-AC WIKA data sheet FL 10.01 Applications Power generation Oil production and refining Water treatment
More informationTrogear Bowsprit Through Hull Installation Manual
Trogear Marine Products, LLC www.trogear.com info@trogear.com 866-616-2978 Trogear Bowsprit Through Hull Installation Manual Congratulations on your purchase of the Trogear Bowsprit which can be installed
More informationREV 03/2017. Zero / Zero Uno
REV 03/2017 Zero / Zero Uno Dedacciai was established in 1992 with the aim of manufacturing state of the art steel tubing for bicycle frames. Zero / Zero Uno 2 Today s result of a more than quarter century
More informationINTRODUCTION TO HULK EARTH ANCHORS Anchoring Rope and Rigging PTY LTD are market leaders in the conceptualisation and production of innovative earth anchoring solutions used in a variety of engineered
More informationSupratec. von-drais-straße 7 D Simmern/Hunsrück Fon: +49 ( 67 61) Fax: +49 ( 67 61)
O X Y FLEX - OM O VA L-MEMBRANE-TUBE-DIFFUSER for fine bubble aeration of liquids UND GESELLSCHAFT FÜR UMWELT- VERFAHRENSTECHNIK mbh von-drais-straße 7 D-55469 Simmern/Hunsrück Fon: +49 ( 67 61) 9 65 09-00
More informationPush-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
More informationFLOAT EQUIPMENT AND CASING ACCESSORIES
FLOAT EQUIPMENT AND CASING ACCESSORIES CONTENTS INTRODUCTION... 2 FLOAT EQUIPMENT... 4 Standard Valve... 4 Differential Valve... 5 SPECIALITY FLOAT EQUIPMENT Double Valve Float Shoes... 6 Float Equipment
More informationA Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
More informationTECHNICAL SPECIFICATIONS SECANT CAISSON WALL TECHNICAL SPECIFICATIONS. October 19, Nanaimo Colliery Dam Auxiliary Spillway, Nanaimo, BC
SECANT CAISSON WALL TECHNICAL TECHNICAL Nanaimo Colliery Dam Auxiliary Spillway, Nanaimo, BC Submitted to: Toby Seward City of Nanaimo 455 Wallace Street Nanaimo, BC V9R 5J6 Report Number: Distribution:
More informationMaterials : Stainless steel ASTM A351 CF8M
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 3/4" Male, hose coupling - 10 C + 150 C Max Pressure : 16 Bars Specifications : Anti blow-out stem Locking device With hose coupling Materials
More informationFehmarnbelt Fixed Link. Geotechnical Large Scale Testing
Fehmarnbelt Fixed Link. Geotechnical Large Scale Testing A. Reto Schreier GEO, Denmark, rsc@geo.dk B. Anders Tovsig Schaarup Andersen Per Aarsleff A/S, Denmark, ata@aarsleff.com C. Nataša Katić + Peter
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationFLEXIBLE AND RELIABLE ANCHORING
Spiral rope anchor and FLEX Head FLEXIBLE AND RELIABLE ANCHORING 1 THE SMARTER ANCHOR FLEXES. The flexibility of the whole system is crucial for both rockfall barriers and other protection systems. Why?
More informationBSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
More informationPhoto Coming. Utility Anchors. macleanpower.com
Photo Coming Utility Anchors macleanpower.com Utility Anchors MPS Utility Anchors MacLean Power Systems has served the utility anchor market for over 90 years. With a rich history of quality, innovation
More informationSubmittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
More informationDesign and Analysis of Rotary Lawn Mower
Design and Analysis of Rotary Lawn Mower Vivek P Revi Vishnu N V Akhil K A Rohith P Kevin Rozario Abstract- KAMCO Industries, Athani, India is a reputed industry undertaken by Kerala state government producing
More informationTechnical Data Sheet. R&M Closures
R&M Closures About this data sheet Edition 3.0 This document has been drafted with utmost care and reflects the products July, 2013 engineering level at the time of publication. Amendments or corrections
More informationMaterials : Forged carbon steel A350 LF2
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 (NPS 1/2" to 2") Female - Female NPT, Socket Welding - 46 C + 425 C Max Pressure : 250 Bars (Class 1500) Specifications : Rising rotating stem
More informationAlso suitable for: Concrete C12/15. For fixing of: Steel constructions Railings Consoles Ladders Wooden constructions Cable trays Machines Staircases
28 Highbond anchor FHB II Flexible installation and highest loads in the cracked tensile zone. OVERVIEW FHB II-A S (standard), zinc plated steel FHB II-A L (performance optimised), zinc-plated steel Resin
More informationCIVE 554/650. Geotechnical Engineering. Rock. Soil. Water. Site Investigation Techniques. CIVE Knight 1. 1/8/2006 CIVE Knight 1
CIVE 554/650 Site Investigation Techniques 1/8/2006 CIVE 554 - Knight 1 Geotechnical Engineering Soil Rock Water 1/8/2006 CIVE 554 - Knight 2 CIVE 554 - Knight 1 Key Soil Engineering Properties Compressibility
More information2.4M Viking Swing Basket Swing
.M Viking Swing Basket Swing PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 75x75x150 5 to Adult 1.5 Metres Approx 6Kg Approx 198Kg SPECIFICATION Solid steel components to EN 10087:1998
More informationGASKET CUTTER SYSTEMS
Product Catalog No. 0503 New Metric Sizes Included GASKET CUTTER SYSTEMS The Leader In Gasket Cutting Tools for Over 75 Years EXTENSION GASKET CUTTERS Now you can cut accurate gaskets quickly and efficiently
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationSeries CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
More informationPrecision Rotary Airlocks and Diverter Valves
Precision Rotary Airlocks and Diverter Valves Utilizing over 40 Years of Mac Process Bulk Material Conveying Technology Airlocks and Diverters Schenck Process offers a wide range of airlocks and diverter
More informationDN 1/2" to 2 Female - Female BSP - 20 C C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Female - Female BSP - 20 C + 180 C Max Pressure : 16 Bars Specifications : Rotating non rising stem Inside screw stem Full bore Materials
More informationBase engine for use in U.S., the U.S. Territories, and Canada
210G / 210G LC 12 13 Engine 210G / 210G LC Base engine for use in U.S., the U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
More informationMaterials : Dichromate zinc plated steel flanges or AISI 316
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 90 C Max Pressure : 16 Bars (10 bars at 90 C) Specifications : Absorb vibrations and noise Linear and angular compansion
More information