Hesvit S3 User Manual V /03/25

Size: px

Start display at page:

Download "Hesvit S3 User Manual V /03/25"

Elvin Parks
5 years ago
Views:

1 Hesvit S3 User Manual V /03/25 1 / 23

2 Content I. Getting Started Wearing your Hesvit S Downloading APP APP installation Hesvit S3 Pairing Binding and unbinding Data Synchronization Data Storage APP / Firmware Update Multi-user management Unit Conversion for Workout Parameters OptionalReminders Maintenance and wear tips II. Homepage Time Battery level Button III. Workout Parameters Steps Mileage Calories burned Sleep time IV. Physical Signs Heart rate Wrist skin temperature V. Environment Parameters Wrist humidity Wrist temperature Barometric pressure/altitude VI. Important Date Reminder VII. Accuracy VIII. Important Safety Instructions...22 IX. Built-in Battery precautions Ⅹ. Disposal and recycling information / 23

wristband so the LED display is closest to the outside of your wrist and facing you.

buckle and insert the rest part of wristband into the rubber ring.

the metal buckle. Then try it again on your wrist. 2.

installation. If you missed the APP installation, please find the "Hesvit S3.

3 I. Getting Started 1. Wearing your Hesvit S3 Get your Hesvit S3 out from the package, untie the wristband, and then put on the wristband so the LED display is closest to the outside of your wrist and facing you. Adjust the space between the Hesvit S3 and your wrist skin to make it comfortable then fasten the metal buckle and insert the rest part of wristband into the rubber ring. If any problem during the wearing occurs, please remove the Hesvit S3 from your wrist and try to fasten the metal buckle. Then try it again on your wrist. 2. Downloading APP Phone system version requirements: Android system 4.4 or above, ios system 7.0 or above. Available on: 3. APP installation After downloading the APP and follow the instructions on the screen to complete the installation. If you missed the APP installation, please find the "Hesvit S3.apk" in the default path: Local -> SD Card -> download, and click it to finish the installation. Note: When you first open Hesvit APP, you may be rejected due to your device security settings. Please adjust your device security settings to resolve this issue. If you are using IOS system, you can tap Settings > General > Profiles or Profiles & Device Management then tap the profile to establish trust. 3 / 23

4 APP Logo Main interface Note:When you install an app from Google Play on a device running Android 6.0 and up you control which capabilities or information that app can access known as permissions. For example, an app might want permission to see your device contacts or location. You can control which permissions an app can access after the app installs on your device. On your device, open the main Settings app. Touch Apps or Application Manager (depending on your device, this may look different). Touch the app you want to update. Touch Permissions. Next to a permission you want to turn on, move the switch to the right until it turns green. If you want to turn a permission off, move the switch to the left until it turns gray. 4. Hesvit S3 Pairing If the Bluetooth is not turned on, the APP will pop a message for you. Just click Settings to turn on the Bluetooth. 4 / 23

5 Automatically identify and sync your Hesvit S3. Data View 5. Binding and unbinding 1). Binding Check and record the serial number(7digits) located in the rear of the Hesvit S3 for binding with AP 5 / 23

Data Synchronization Data Synchronization: Users can create a cloud account with their email address or mobile number, so that the data can be uploaded to cloud server

6 Click -> Setting -> Hesvit S3 Setting -> Binding to choose you Hesvit S3 SN and bind it. 2). Unbinding Click -> Setting -> Hesvit S3 Setting -> Unbinding to unbind the previous Hesvit S3. 6. Data Synchronization Data Synchronization: Users can create a cloud account with their address or mobile number, so that the data can be uploaded to cloud server when users connect APP with Hesvit band s Bluetooth and set the synchronization of band s data. Step1 : Create your account Choose Setting->Log In->Register now, then choose your country, input your address and click Next, finally you can log in, switch on your Bluetooth, click to synchronize your data. 6 / 23

7 7 / 23

8 Note: The time showing in the screen of band will automatically synchronize with the mobile phone during synchronization of band and APP. Only the band that is shown in the interface of the APP is the one that will automatically synchronize. If you want to synchronize another band, please manually choose the band s S/N to start its synchronization. During synchronization, the band s data gets deleted in which updated data will be shown. Every time the synchronization provides new data. The APP will show the same band screen data during its synchronization. Please note that sometimes there will be inconsistent data because the band has been synchronized. When you choose your band and return to the homepage, this operation will allow an automatic sync of the band and the APP. Data will be stored in cloud server if users login in with their cloud accounts and synchronize the data. If not, data will be only saved for 7 to 10 days in band and 30 days in APP. Real-time synchronization can be switch off, because the band can store the data for several days. Step2: Upload data to cloud server Choose Setting->Upload data to cloud, choose your band and click Upload. 7. Data Storage The band can store data generating in 7~10 days. Please synchronize the band with the mobile phone as soon as possible. The more times you synchronize the data, the shorter time it takes for each sync process. 8 / 23

9 8. APP/Firmware Update For APP: Choose ->Setting->About. Push notification will show when an update version is available. Click the information and follow the instruction to complete the update progress. For Firmware: Choose ->Setting->Hesvit S3 Setting ->Update now. 9 / 23

9. Multi-user management APP has the Multi-user management function to serve

To do this, input personal information to monitor any family or friends account.

then choose "Bind". and finally click "Finish" Choose the band you want to add.

10 9. Multi-user management APP has the Multi-user management function to serve multiple Hesvit S3 accounts. To do this, input personal information to monitor any family or friends account. Click Me Click + Adjust the setting after entering the personal information, and then choose "Bind". and finally click "Finish" Choose the band you want to add. Check the 7 digit serial number on the inside of band, and choose the serial number showing in the search results in your device screen. 10 / 23

10. Unit Conversion for Workout Parameters Change units for distance and temperature.

If you choose Imperial (Metric) and click OK, and then the units for distance will convert to Miles

11 10. Unit Conversion for Workout Parameters Change units for distance and temperature. Choose Setting> Hesvitband Setting and find the Unit Conversion section. If you choose Imperial (Metric) and click OK, and then the units for distance will convert to Miles (Kilometers), and correspondingly the units for wrist temperature and wrist skin temperature will convert to Fahrenheits (Celsius). 11. Optional reminders Optional reminders for important dates,steps, heart rate, sleep quality and temperature differences between wrist skin and wrist, are provided. Users can set the value they want to give them reminders or use the default setting. 11 / 23

12 (1) For important dates: Choose section, edit the Time, Cycle and Content, and then you can see the reminder of the certain dates you set. Notes: Plese set the date in 3 months. (2) For steps reminder: (3) For sleep quality reminder: 12 / 23

13 (4) For heart rate reminder: (5) For temperature difference of wrist and wrist skin: 13 / 23

12. Maintenance and wear tips Clean and dry your Hesvit S3 regularly, particularly in areas in contact with the skin. Wear your Hesvit S3 loosely enough to allow air circulation.

14 12. Maintenance and wear tips Clean and dry your Hesvit S3 regularly, particularly in areas in contact with the skin. Wear your Hesvit S3 loosely enough to allow air circulation. Use skin care products sparingly on the areas of the skin covered by your Hesvit S3. Please take off the Hesvit S3 when skin irritation or discomfort occurs. II. Homepage 1. Time The time of Hesvit S3 can be set manually: Press and hold button for more than 10s, the hour flashes. Tap to change the hour. Press and hold the button for more than 10s again, the minute flashes. Tap to change the minute. Lastly, press and hold the button for more than 10s, time stops flashing. Settings finish. The time can also be synchronized with the mobile phone. Every time when synchronizing Hesvit S3 with mobile phone, it automatically synchronizes the time of the mobile phone. 2. Battery level A full charge takes hours. After fully charged, it can hold its charge for 7-10 days. Charge via the micro-usb interface. 3. Button Press button for less than 2s to start backlight, which goes out in 10s. Press and hold button for more than 2s until "--" besides " " flashes. Release the button. It starts to test heart rate. Press and hold button for more than 10s, the hour flashes. Tap to change the hour. Press and hold the button for more than 10s again, the minute flashes. Tap to change the minute. Lastly, press and hold the button for more than 10s, time stops flashing. Settings finish. 14 / 23

Steps are counted from 24:00 to 24:00 the next day. W.H.O suggests that an adult should walk 10,000 steps per day.

15 III. Workout Parameters 1. Steps Steps, means the steps counted during walking and running. Steps are calculated by the 3-axis acceleration sensor in the Hesvit S3. It may differ a little bit from the actual steps. Steps are counted from 24:00 to 24:00 the next day. W.H.O suggests that an adult should walk 10,000 steps per day. When your steps reach an integral multiple of 10,000, the screen will flash 10s, to congratulate you on achieving the health requirement. 2. Mileage 15 / 23

16 Mileage, means the distance you've walked and run that day. Mileage is calculated according to the walking and running steps. Meanwhile, it is related to the individual's height (set in "my profile"). It may differ a little bit from the actual mileage. Mileage is calculated from 24:00 to 24:00 the next day. 3. Calories burned Exercises burned calories, only means the calories burned during exercises, not including basal metabolism. Person daily burned calories contain consist of burned calories through activity workout. Basal metabolism, means the minimum energy demanded by organs to keep the body functioning at rest. It is the energy metabolism at rest, not affected by muscular activity, environment temperature, food and mental state. It varies by age, weight and physical fitness, etc. 16 / 23

17 Exercises burned calories are calculated according to the linear relationship between speed and calories. The speed is obtained via the calculated steps and mileage. Calories burned are calculated from 24:00 to 24:00 the next day. The more exercise one does, the more calories one burns. It's a sign of good health. 4.Sleep time Sleep time, means sleep hours. Sleep contains deep sleep, light sleep and awake moments. Hesvit S3 analyses the body activity intensity according to the data from 3-axis acceleration sensor per minute. Based on the activity intensity, it determines the sleep state in current minute: deep, light or awake. It further calculates the sleep start time, sleep time and awake moments according to the sleep state per minute. When Hesvit S3 is put aside, it does not calculate the sleep. Errors may occur in determining the sleep state, such as band sitting still, if it s held in one position for a long time, etc. Sleep time is calculated from 18:00 to 18:00 the next day. Calculated sleep time means the displayed sleep hours. It may delay minutes, which is normal. Usually, the sleep time varies by age: 5-7 years: 15 hours; 8-12 years: 10 hours; years: 9 hours; years: 7-8 hours; above 60 years: hours. Besides, the best time to sleep is suggested from 22:00-6:00. For seniors, it's 21:00-5:00 and for children, 20:00-6:00. In addition, people feel refreshed when their deep sleep reaches 4 hours. Otherwise, they get exhausted easily. IV. Physical Signs 1.Heart rate 17 / 23

Heart rate refers to the number of heartbeat per minute. Normally, it ranges from 60-100 bpm, which varies by age, gender, diet, emotion or other physiological factors and external conditions.

18 Heart rate refers to the number of heartbeat per minute. Normally, it ranges from bpm, which varies by age, gender, diet, emotion or other physiological factors and external conditions.. In general, younger individuals have a higher heart rate than the elderly and females have a heart rate than their male counterparts. The normal adult human heart rate is bpm. Ideal heart rate is bpm (athletes tend to have lower heart rates, usually 50 bpm). Resting heart rate is the number of heartbeat per minute at total rest. It is found that the changes in resting heart rate over time are related with the death rate due to heart disease. In general, within the normal range, the resting heart rate is: the lower, the better. Ways to lower the resting heart rate are to exercise and to lose weight. Maximum heart rate is the highest heart rate an individual can achieve without severe problems through exercise stress. Current prevailing calculation formula is: HRmax=220 Age. Target heart rate is the safe range for how fast your heart should beat while you exercise, to improve the aerobic endurance level for cardiovascular system. Current prevailing calculation formula is: Target heart rate range=(hrmax-hrrest) x HRrest ~~ (HRmax-HRrest) x HRrest. For example, a man ages 22 with HRrest of 68, his target heart rate range is: ((220-22)-68)x =146~~((220-22)-68)x =172, that is, 146~~172. Normally, heart rate increases immediately after exercise and decreases at a fast rate after exercising stopped, that is, heart rate recovery time is quite short >(If occurrence of a slow heart rate increases and decreases, please see your physician Heart rate is obtained by measuring the pulse. With the photoelectric reflection sensor, it obtains the wrist blood pulse signal. The blood pulse is consistent with the heart rate. To measure the heart rate accurately, wear the Hesvit S3 tightly around a bare wrist about 2cm above the wrist joint. Heart rate test may fail in the following situations: 1) Improper wearing of the Hesvit S3; 2) Too large space between the Hesvit S3 and your wrist; 3) Too large amplitude of the arm swings, e.g., during running or walking. 18 / 23

19 Heart rate tests automatically on the hour, such as 1:00, 2:00, etc. Total 24 times a day. Or, press and hold button for more than 2s until "--" besides " " flashes. Release the button. It starts to test heart rate. When heart rate exceeds 100bpm, the screen will flash for 10 sec as an indication of high heart rate warning. 2. Wrist skin temperature Wrist skin temperature means the temperature on wrist skin. Body temperature varies on different parts of the body and from person to person and even at different time of the day. Wrist skin temperature is measured by the temperature sensor. Temperature sensor is usually a resistive sensor. The resistance changes with the wrist skin temperature. Ideal resistance changes linearly with the temperature. This linear relationship is used to analyze the wrist skin temperature. Same as the heart rate, the wrist skin temperature tests and saves automatically on the hour, such as 1:00, 2:00, etc. Total 24 times a day. Or, press and hold button for more than 2s until "--" besides " " flashes. Release the button. It starts to test and save. Temperature varies on different parts of the body. Head temperature is generally higher than foot temperature. Take forearm for example. Normally, forearm temperature is 1 lower than axillary temperature. Body temperature can thus be inferred. It is found in a comfortable environment, the average skin temperature is 33.8, with a mean deviation of 0.6.To maintain a comfortable average skin temperature is an important condition to ensure human thermal comfort. V. Environment Parameters 1. Wrist humidity 19 / 23

20 Wrist humidity means the humidity of the air between wrist and Hesvit S3. It is different from environment humidity, and is affected by both wrist skin humidity and environment humidity. Wrist humidity is obtained according to the change of the electrical signal, which is converted from the amount of humidity by the temperature & humidity sensor. Wrist humidity is tested automatically on the hour, such as 1:00, 2:00. With a total of 24 times a day. At a given temperature in a given volume, the less water vapors present in the air, the drier the air is. On the contrary, the more water vapors in the air, the moister the air is. Most comfortable humidity is 50%-70%. When wrist humidity becomes extremely high, e.g., 80%-95%, it indicates the user is sweating. When wrist humidity is too low, the skin becomes dry, rough, peeling, which indicates the water content of the cuticle is dropping. According to the changes of wrist humidity, users can find out the nursing method suitable for themselves, like strengthening the skin care, adjusting the structure of diets and drinking more water. 2. Wrist temperature Wrist temperature means the temperature of the air between wrist and Hesvit S3. It is 20 / 23

21 different from environment temperature, and is affected by both wrist skin temperature and environment temperature. Wrist temperature is obtained according to the change of the electrical signal, which is converted from the amount of temperature by the temperature & humidity sensor. Wrist temperature is tested automatically on the hour, such as 1:00, 2:00. With a total of 24 times a day. When the difference between skin temperature and wrist temperature exceeds 4, the screen will flash for 10s, to remind the users to keep warm in cold days. The most comfortable environment temperature in summer ranges C and in winter C. When environment temperature is above the upper limit of the comfortable temperature, people feel so warm. When it's above 37 C, people feel too hot. Usually, the maximum temperature humans can withstand is 52 C. On the contrary, when environment temperature is under the lower limit of the comfortable temperature, people feel cool and cold. When it s under 0 C, people feel freezing. 3. Barometric pressure/altitude Barometric pressure is the air pressure per unit area. It is equal to the weight of the vertical air column extended upward to the aeropause above the unit area. Altitude is the vertical distance of a location above sea level. The barometric pressure is measured by barometric pressure sensor. The altitude is calculated according to the barometric pressure value. The conversion formula between barometric pressure and altitude is: Altitude (meter) = (1013-Barometric pressure) x 10. There is a small deviation in the altitude calculated from barometric pressure, because the barometric pressure is affected by both environment temperature and humidity. Barometric pressure tests automatically on the hour, such as 1:00, 2:00. Total 24 times a day. Most comfortable barometric pressure is 1bar, that is, 1013mbar. On the airplane, the cabin is pressurized, so with the barometric pressure in the range of mbar, people feel comfortable. 21 / 23

22 Ⅵ. Important Date Reminder Countdown the next physical period for women by setting in the APP. Men can set important date reminder in the APP. Ⅶ. Accuracy Steps Hesvit S3 converts the body motion situation (e.g. acceleration) into a digital measurement data through triaxial accelerometers. By analyzing the acceleration data, it provides the information about the frequency, duration, intensity and movement patterns (walking or running) of sports to determine the steps, and walking distance, calories burned and sleep quality for the users. Triaxial accelerometers can measure the displacement movement in any direction to ensure the accuracy of the data. The algorithm for counting steps used in the Hesvit S3 can determine the user's movement patterns (walking or running.) by frequency and amplitude of a moving arm. More specifically, Hesvit S3 worn on the body is more like a wrist activity sensor. In many cases, the arm moves but the body does not move, such as beating a drum, cooking, and patting the back of babies to coax into sleep, which makes the band judge the user s physical status to be active and thus recording more steps. If the user push a stroller, shopping cart and do other movement that restrict the arm swinging movement, the band will record less steps due to the less arm movements. Due to the influence of user movement pattern and impact of external environment, the band will record steps higher or lower than the exact value in some certain period, but this will not influence the overall statistics. Heart rate Hesvit S3 obtains the heart rate data by measuring the pulse of the blood through the photoelectric reflective sensor. The number of pulse is consistent with the heart rate. In order to accurately measure the heart rate, you need to wear the band properly. The following situations may result in the incorrect data. 1) not wear the band properly; 2) the gap between the band and wrist is to wide 3)too much arm movement, such as running or walking; 4) the band is exposed to glare Factors related to heart rate: sports, temperature, humidity, pressure level, body posture, Caffeine intake, drug and etc. Ⅷ. Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not try to open the smart band, substances contained in this product and /or its battery 22 / 23

23 may damage the environment. Do not place your Hesvit S3 to extremely low or high temperatures and/or environment. Do not use your Hesvit S3 in team room or a sauna. Do not use abrasive cleaners to clean your Hesvit S3. Must not dispose your Hesvit S3 in a washing machine,dishwasher or dryer. Do not leave your Hesvit S3 in direct sunlight for an extended period of time. Do not leave your Hesvit S3 near open fire. Must not put your Hesvit S3 in a fire, the battery could explode. Must not tamper with your Hesvit S3. Do not attempt to disassemble your Hesvit S3, it does not contain serviceable components. Do not allow children to play with the Hesvit S3, the small components may be a choking hazard! Ⅸ. Built-in Battery precautions Do not attempt to replace your Hesvit S3 battery, it s built-in and not changeable. Charge the battery in accordance with the instructions supplied with this guide. Charge your Hesvit S3 using power supply or a certified computer. Do not attempt to force open the built-in battery. Ⅹ. Disposal and recycling information The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be noted that this is your responsibility to handle electronic equipment at recycling centers so as to help conserve natural resources. Every country in the European Union should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off point, please contact your local electrical and electronic equipment waste management authority or the retailer where you bought the product. Do not get rid of Hesvit S3 with household waste. Batteries are not to be disposed of in municipal waste stream and require separate collection. Disposal of the packaging and your Hesvit S3 should be done in accordance with local regulations. 23 / 23

LifeBeat should be worn during daytime as well as night time as it can record activity levels as well as sleep patterns.

LifeBeat should be worn during daytime as well as night time as it can record activity levels as well as sleep patterns. myhealth FAQ V1.0.5 GENERAL What is LifeBeat Stress Tracker? LifeBeat Stress Tracker is a system that lets you track your activity, sleep, and especially your various stress levels, so that you can improve