SAFE WORK METHOD STATEMENT (Part 1)
|
|
- Meryl Cain
- 6 years ago
- Views:
Transcription
1 AFE WO ETHOD TATEENT (Part 1) Work Activity ocation of Work Activity Personnel qualifications & experience required Engineering details / certificates / WorkCover approvals required egislation, Codes of Practice, tandards applicable: ervicing and aintenance of EWP s Various Clients ites elevant trade qualification with industry experience. Genie Employee nduction and on the job training. Current relevant Drivers licence. pecific ine nduction (f equired). Contact Chris Bond A afe use of EWP s NW Occupational Health & afety Act 2000 VC Occupational Health & afety Act 1985 QD Workplace Health & afety Act 1995 A Occupational Health, afety & welfare Act 1986 WA Occupational Health & afety Act 1984 upervision & inspection to be provided: Training & instruction to be provided (eg manual handling, working at heights, etc.) Plant & equipment to be used: aintenance checks to be performed on plant & equipment: Protective equipment to be used: Genie supervisor onsite. ite supervisor This W. anual Handling Basic EWP Training pecific site induction (f equired) Various types of EWP s. ervice Vehicle, Tools of the Trade ifting Chains, lings. Other manual handling aids as required. efer anufacturers ervice pecs and A All personnel to wear supplied high visibility uniform or afety Vest Warning signs & control measures: Any other site specific requirements, as per site induction Page 1 of 5 W-ervicing & aintenance of EWP s ssue Date: 17/07/2013
2 Details of emergency procedures: ist of attachments: Genie Contact Chris Bond As per specific ine site emergency procedures N/A Prepared by eviewed by Approved by Name: John Yannakopoulos Name: Chris Bond Name: (Genie T) ole: OH Consultants ole: WHA ole: Date: 10/12/2012 Date: 10/12/2012 Date: The following list of Personnel may attend the project. NAE POTON GNATUE These personnel have all read and understood the conditions of this afe Work ethod tatement isk atrix Consequence ikelihood Negligible inor oderate ajor Catastrophic Almost Certain ow oderate High Extreme Extreme ikely ow ow oderate High Extreme Possible Very ow ow oderate High Extreme Unlikely Very ow ow ow oderate Extreme are Very ow Very ow Very ow oderate High This document has been prepared and developed in consultation with our employees using the Genie isk anagement Policy, Procedures and Principles. Page 2 of 5 W-ervicing & aintenance of EWP s ssue Date: 17/07/2013
3 AFE WO ETHOD TATEENT (Job afety Analysis Worksheet)Part 2 JOB EQUENCE HAZAD DENTFCATON AE THE CONTO THAT W BE UED (afe Work Procedures) Drive to and access work area Vehicle to vehicle / mobile plant collision Vehicle / obile plant to person collision Vehicle rollover lip / Trip/ Falls - Obey traffic signage - Drivers must be licensed - Drive to site rules, site and terrain conditions - Be aware that there are mobile plant, heavy vehicles moving around the site and may appear without warning - Do not block roads/ throughways when parking a vehicle or mobile plant - Vehicle to contain first aid kit and fire extinguisher - Personnel are not to use handheld mobile phones whilst driving - Personnel are to wear seatbelts at all time in vehicle and plant - Be aware of slips trips hazards at all locations on the site due to uneven ground, occasionally wet conditions, construction waste to be collected, reinforcing bar not covered by concrete earthworks - Personnel are to use 3-point contact when climbing ladders, entering and exiting mobile plant - All personnel must sign the Take 5 (if separate from JA card) and JA card indicating that they understand and will work to the direction of the W - All personnel will not do anything they feel is unsafe and refer the matter to their leading hand, supervisor or foreman - All personnel will wear the site PPE as a minimum and extra PPE for specialist tasks as directed by the tasks mandatory control. Driver All personnel Area foreman Page 3 of 5 W-ervicing & aintenance of EWP s eva1 ssue Date: 10/12/2012. ev Date: 10/12/2012.
4 JOB EQUENCE HAZAD DENTFCATON AE THE CONTO THAT W BE UED (afe Work Procedures) tart and run EWP. Damage to equipment / personnel due to incorrect start up / operation procedure. All employees are to undergo basic AWP training and sufficient on the job training prior to setting up AWP s. anager Hearing loss due to high noise levels. Always wear hearing protection when running engines. Personnel injury due to rotating machinery. H eep well clear of rotating parts, all rotating parts to be guarded Personal injury due to hot oils / heated water from pump / pipe work or turbo and exhaust Environmental hazard fuel / oil spill. Use gloves when working near hot surfaces Check the surface temperature of engines before opening hose clamps. Oil leaks and fuel spills to be cleaned up immediately. ervicing of EWP. Vehicle to vehicle / mobile plant collision. Obey traffic signage Drivers must be licensed Drive to site rules, site and terrain conditions Be aware that there are mobile plant, heavy vehicles moving around the site and may appear without warning Hearing loss due to high noise levels. lip / Trips / Falls. Always wear hearing protection when running engines. Be aware of slips, trips & hazards at all locations on the site due to uneven ground, wet conditions and construction waste. Personnel are to use 3-point contact when climbing ladders, entering and exiting mobile plant or working on uneven and slippery surfaces Page 4 of 5 W-ervicing & aintenance of EWP s eva1 ssue Date: 10/12/2012. ev Date: 10/12/2012.
5 JOB EQUENCE HAZAD DENTFCATON AE THE CONTO THAT W BE UED (afe Work Procedures) ervicing of EWP. (Continued) Dehydration / heat stress / sunstroke. Wear sun protection equipment and sunscreen, ensure drinking water is available and abide by the specific site induction. Environmental hazard fuel / oil spill. Drip trays to be used when servicing pumps to contain oil All fitters are to carry spill kits in service vehicles All used and contaminated oil is to be contained and removed from site anual handling / back muscle Crush / pinch injuries. Ensure that correct anual Handling technique is used. anual Handling aids to be used where available Damage to equipment / personnel due to incorrect start up / operation procedure. Personal injury due to hot oils / heated water from EWP or turbo and exhaust Only Trade qualified fitters are to service AWP s. efer operating instructions. efer manufacturer s service and operating instructions Use gloves when working near hot surfaces Check the surface temperature of EWP before opening hose clamps, wear gloves Page 5 of 5 W-ervicing & aintenance of EWP s eva1 ssue Date: 10/12/2012. ev Date: 10/12/2012.
SAFE WORK METHOD STATEMENT
SWMS No. 09 SEED COECTION Barung andcare Assoc Inc 38A Coral St, Maleny Qld, 4552 Tel: 07 5494 3151 Email: info@barunglandcare.org.au ABN: 48 562 796 065 VERSION CONTRO Original version Date of this version
More informationJOB SAFETY ENVIRONMENT ANALYSIS (JSEA) Working With In Situ Testing Rigs
Personnel Involved Manager Project Operators Assistant Notes re Operator/Off-Sider Training Allan McConnell In situ testing is a niche business with very few rigs in Australia. There are no specific training
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationPotential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
More informationWHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)
WHS 017 - WHS 017 Hazard Register - Version 5.0 April 20 Doc No: WHS 017 Effective Date: 04/04/20 1 WORKING WITH EARTHMOVING PLANT/ TRUCKS/SITE VEHICLES COLLISIONS OTHER PLANT EQUIPMENT SITE VEHICLES PERSONNELL
More informationMethod Statement Author
Plan Bee Limited 3.3 Etna Industrial estate Clamp Road Motherwell Scotland ML2 7XQ Tel: 01698580572 Method Statement Method Statement Details Method Statement Number 7 Method Statement Date Monday 3rd
More informationHazards Requiring Attention: AS AT Friday, 29 January Next Review Saturday, 28 January Total Hazards Recorded 39. Critical Risk Hazards 0
EF26 Risk Assessment CAT Excavator Hazards Requiring Attention: AS AT Friday, 29 January 2016 0 Next Review Saturday, 28 January 2017 Total Hazards Recorded 39 Critical Risk Hazards 0 High Risk Hazards
More informationHow severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationSAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030
SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 HIGH RISK APT AM Holdings Pty. Ltd. [ABN] 95124754383 Principal Contractor (PC) APA Group Level 19, HSBC Building 580 George
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT WATER PUMP - PETROL Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationHazards Requiring Attention: AS AT Friday, 1 April Next Review Saturday, 1 April Total Hazards Recorded 43. Critical Risk Hazards 0
EF26 Risk Assessment Kubota U35-4 s Requiring Attention: AS AT Friday, 1 April 2016 0 Next Review Saturday, 1 April 2017 Total s Recorded 43 Critical Risk s 0 High Risk s 0 Moderate Risk s 10 Low Risk
More informationAppendix 4C - Sample SWMS Trenching
Appendix 4C - Sample SWMS Trenching SAFE WORK METHOD STATEMENT SWMS Reference : Insert document number : Version A Date : Workplace / Project : Company Address: Work Activity / Job / Task or Process :
More informationSACPSSA ATHLETICS CARNIVAL RISK ASSESSMENT 2017
ATETICS CARNIVA RISK ASSESSENT 2017 WORKPACE: SA ATETICS STADIU & ASSESSORS NAE(s): Narelle Dew & Darren Elliot DATE: to be reviewed 02/2018 DESCRIPTION OF TASK: ATETICS CARNIVAS OCATION: SA ATETICS STADIU
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationSafe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Organisation Details : Organisation Name Northern Plumbing Contact ABN 17 15 41 4 Position Director Address 47 Thomas Street Edgeworth 85 Phone Number 0411 10 4 Project
More informationRisk Assessment Form (Qualitative)
Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Use of a Mobile Elevated Work Platform (MEWP) Boom SWMS No. 19 Authorized
More informationWestern Power Safe Work Method Statement Task details
Western Power Safe Work ethod Statement Task details Description Substation aintenance D 10721527 Approved by anager, Work Practices Review team SWS Development Approval date October 2015 Qualifications/icences
More informationSWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6
Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method
More informationSACPSSA CROSS COUNTRY CARNIVAL RISK ASSESSMENT 2017
SACPSSA CROSS COUNTR CARNIVA RISK ASSESSENT 2017 WORKPACE: East Parklands, starting currently on the Prince Alfred College Oval ASSESSORS NAE(s): Rick ackereth & Ric Trutwin DATE: to be reviewed 02/2018
More informationBitumen Delivery Driver Inductions Eurobitume UK
Bitumen Delivery Driver Inductions Eurobitume UK The information in this module is given in good faith and belief in its accuracy at the time of publication, but does not imply any legal liability or responsibility
More informationPlant Hazard Identification and Risk Assessment
Plant Hazard dentification and isk ssessment H 034 P 05 ssue ate: 04/04/2017 eview ate: 04/04/2018 Plant information Plant item: Water ruck Plant identification details (asset/plant no.): Project: Competency
More informationSACPSSA COME AND TRY DAY RISK ASSESSMENT 2017
COE AND TR DA RISK ASSESSENT 2017 WORKPACE: Venue TBA PARK 25 ASSESSORS NAE(s): Joshua Page DATE: to be review on 02/2018 DESCRIPTION OF TASK: COE AND TR DA (ear 2/3 s) OCATION: TBA DATE OF EVENT: PE Week
More informationSAFE WORK METHOD STATEMENTS
Recips 11/56 Norcal Road Nunawading Vic. 11 ABN: 48 04 075 70 Contact Person: Dean Spicer Contact Number: 9878 9006 SAFE WORK METHOD STATEMENTS for Format 1 Various Service Clients for Service work and
More informationJob Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS)
Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS) Part 1: Project and Task Identification Process: Initiators of JSEAs are responsible for consulting the Project Supervisor,
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Operate Diesel Road Saw This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)
More informationSAFE WORK METHOD STATEMENT CARPENTER
HOST EMPLOYER DECLARATION I declare the worker/s named on this work authority have been provided with a site specific safety induction that complies with the requirements of the Workplace Health & Safety
More informationJOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationBogo Operations Pollution Incident Response Management Plan
Bogo Operations Pollution Incident Response Management Plan Rhyolite Hard Rock Aggregate Quarry 134 Paynes Road BOOKHAM NSW 2582 PO Box 426 COWRA NSW 2794 p: 02 6227 7260 p: 02 6345 4253 e: info@bogoquarry.com.au
More informationRisk Assessment Form
Assessment Form Oil Salvage Limited Assessment Record Activity: Loading of tankers (Collection and Deliveries) Ref Number: RA03 Having assessed the and risks, I believe that if the control measures identified
More informationThe Sample Company Pty Ltd
Job Safety and Environmental Analysis (JSEA) / Safe Work Method Statement (SWMS) Part 1: Project and Task Identification Process Initiators of SWMSs are responsible for consulting the Project Supervisor,
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More informationSafety Risk Assessment Hand and Power Tools
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 Use of hand and power tools B Contractors/Sub
More informationFLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE
JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationRISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager
RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Traineeship Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE: DATE: / /
More informationSCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT
SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT Prepared for:- Date:- Work Scheduled:- SCOPE OF WORK Carry out installation of flow meters / pressure sensors. Installation of flow meter procedure
More informationWestern Power Safe Work Method Statement Task details
Western Power Safe Work ethod Statement Task details Description High Voltage Testing D 10697056 Approved by Work Practices anager Review team SWS Development Approval date ay 2013 Qualifications/icences
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationBuchanan. Approved: John Downes
Severity Site triio Activity Vacuum Excavator Persons conducting assessment SHEQ DEPT Assessment No triio 21 Review Date 11/01/2021 Revision No. 10 Name: Paul Disley/Ian Buchanan Signature Date: 11/01/2019
More informationWorking at Height - MEWPS & Ladders. Your company details Address Tel: Fax: Mobile:
Project/Contract Contractor Site Address Project Start Date Expected Duration Projected Completion Date Your company details Address Tel: Fax: Mobile: Document Author Authorised by Name Title Signature
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT EXCAVATION OR TRENCHING Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationSafe Work Method Statement (SWMS) Worksheet
WORKPLACE / PROJECT NAME: AMS REF NO / TITLE: COMPANY NAME: NETWORK DIRECTIONAL DRILLING (GEELONG) P/L (if applicable) SWMS NO: (if applicable) WORK ACTIVITY / JOB / TASK OR PROCESS DESCRIPTION DATE SWMS
More informationGarbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014
Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028 Name Date Signature Author Jarred Hearle 30/11/2014 Reviewed John Nulty 30/11/2014 Approved Geoff Selfe 01/12/2014 Key Safety Acts Complete a 5
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationSafe Work Method Statement (SWMS)
Safe Work Method Statement (SWMS) Work Activity/Description: Site Name: Date: Site Address: Name Position Signature Document No: Prepared By: OHS Manager Revision: Reviewed By: National Program Manager
More informationSWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0002 (Void Platform Stairs) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities & SWMS 0002 Void Platform) Additional
More informationActivity Hazard Analysis (AHA) Activity/Work Task: New Ductwork Installation Overall Risk Assessment Code (RAC) (Use highest code) M
Activity Hazard Analysis (AHA) Activity/Work Task: New Ductwork Installation Overall Risk Assessment Code (RAC) (Use highest code) Project Location: NCO Academy Building 5518 JBDL Contract Number: W912QR-12-C-0074
More informationWestern Power Safe Work Method Statement Task details
Western Power Safe Work ethod Statement Task details Description Transmission Tower Work D 10696821 Approved by Work Practices anager Review team SWS Development Approval date October 2015 Qualifications
More informationTemporary load-bearing support for structural alterations or repairs
CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal
More informationSWMS No 001 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 5
Samark North Qld Pty Ltd SWMS Manual SWMS No 00 Samark North Qld Pty Ltd ABN : 99 082 98 87 Electrical Contractors License C372 Page 2 of Safe Work Method Statement Title: SWMS:00 USING PORTABLE LADDERS
More informationHigh Pressure Washer Safe Work Procedure PTES_HSE_SWP_006. Name Date Signature. Author John Nulty 12/05/2015. Reviewed Jarred Hearle 12/05/2015
High Pressure Washer Safe Work Procedure PTES_HSE_SWP_006 Name Date Signature Author John Nulty 12/05/2015 Reviewed Jarred Hearle 12/05/2015 Approved Geoff Selfe 12/05/2015 Key Safety Acts Complete a 5
More informationWestern Power Safe Work Method Statement Task details
Western Power Safe Work ethod Statement Task details Description igh Voltage (V) etering Installation Commissioning D 10643700 Approved by Work Practices Development anager Review team SWS Development
More informationSafety Risk Assessment Roofing Works / Surveying / Inspections
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 One Direct Operatives accessing roof
More informationSafe Work Procedure for installation of external cladding
Safe Work Procedure for installation of external cladding This procedure has been formulated to cover safe systems of work for the installation of external cladding. This instruction will be used to reduce
More informationHealth and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
More informationSACPSSA CROSS COUNTRY CARNIVAL RISK ASSESSMENT YEAR
SACPSSA CROSS COUNTR CARNIVA RISK ASSESSENT EAR WORKPACE: ASSESSOR S NAE(s): Darren Elliott DATE: to be reviewed 02/2019 East Parklands, startin currently on the Prince Alfred Collee Oval DESCRIPTION OF
More informationSAFE WORK METHOD STATEMENT 0003 (Perimeter and Balcony Fallguard) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities)
Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0003 (Perimeter and Balcony Fallguard) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities) Additional Information
More informationPotable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/
Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041 Name Date Signature Author Geoff Selfe 25/01/2016 Reviewed Solomon Site 25/01/2016 ----- Approved Michael Garkaklis 25/01/2016 Key Safety Acts Complete
More informationSafe Work Method Statement
Company Name: Safe Work Method Statement Site Address: Other Details: Contractor: Activity/Trade: Electrician Date: TASKS List the tasks required to perform the activity in sequence carried out. Entry
More informationMonash University Academy of Performing Arts Safety Induction
Monash University Academy of Performing Arts Safety Induction Safety induction for the Robert Blackwood Hall Revised August 2013 Welcome to the Monash University Academy of Performing Arts induction for
More informationWest Midlands Police Risk Assessment Form
Assessment Form Assessment Subject/Area: Tasks associated with the execution of warrants URN (PU/001) etc): 01/2013 Assessed By: Assessment Date: 21/09/13 Review Date: September 2014 Assessor Responsibility
More informationSafety Risk Assessment Carpentry
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 General carpentry activities including,
More informationSafe Work Method Statement Required for all High Risk Activities identified for the Project
Application of Herbicides SWMS #1 Safe Work Method Statement * This column is used to undertake frequent Workplace Audits/Inspection to verify controls are in place. # If a control measure is ongoing indicate:
More informationWheeler Cranes 6 McIntyre Rd Tomago NSW 2324
Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 ABN: 34 088 229 190 This SWMS has been developed and authorised by: Name Albie Wheeler Position Managing Director Date 1/7/12 Signature Phone 0249649991 Mobile
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT LOADING AND UNLOADING VEHICLES Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationUniversity College Dublin Machinery/Equipment Risk Assessment Template
1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT AUGER / POST HOLE DIGGER Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationSFG-SWMS-SHOPFITTING
SFG-SWMS-SHOPFITTING PROJECT NAME: 266 Woori Yallock Road Cockatoo VIC 371 ACN: 620 127 915 Email: admin@superbfitoutgroup.com Mobile: 0452 5UPERB (57 372) PH: (03) 59 6 3 93 RISK ASSESSMENT & SAFE WORK
More informationRIIWMG203D Drain and Dewater Civil Construction Site Learner Guide
RIIWMG203D Drain and Dewater Civil Construction Site Table of Contents 1.1 Introduction... 3 1.1.1 Drainage and Dewatering... 3 1.2 Site Policies and Procedures... 5 1.3 Work Instructions... 6 1.3.1 Reading
More informationC-Consequence, P Probability, R-Risk Rating Value Page 2 of 2
General Procedure SE-GEN-04 azard nalysis & ssessment, Identification of Environmental spect and Impact ssessment P-474 / R / 01 Rev : 02 Date: 0.01.2012 CTIVITY RISK SSESSMENT WORKSEET Work ctivity: ocation:
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
More informationWORK METHOD STATEMENT TERMITE PROTECTION
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationSACPSSA NETBALL CARNIVAL RISK ASSESSMENT 2017
SACPSSA NTBA CARNIVA RISK ASSSSNT 2017 WORKPAC: NTBA SA PRICIN STADIU & SACPSSA ASSSSORS NA(s): Kristen Victory & Rosie Petrilli DAT: to be reviewed 02/2018 DSCRIPTION OF TASK: SACPSSA NTBA CARNIVAS OCATION:
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
More informationSAFE WORK METHOD STATEMENT (SWMS) GENERAL GARDENING with Blowers, Hedge Trimmers, Whipper Snippers, Pruners, Spray Units
Job Description/Task/: General Gardening such as using Blowers, Hedge Trimmers, Whipper Snippers, Pruners, Spray Units Name and Phone Number of Person Completing SWMS: Name and Phone Number of the Person
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationRISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2
PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Excavator Models 322 341, (Series D & G) CONTENTS Applicability Standards referenced in the preparation
More informationCONTRACT MANAGEMENT Document 10a: Guideline for Job Safety Assessments
CONTRACT MANAGEMENT Document 10a: Guideline for Job Safety Assessments Last Update: 30 September 2009 Owner: Manager OHS 1. Introduction The Contract Manager is responsible for reviewing Job Safety Assessments
More informationWHS CONTRACTOR INFORMATION PACKAGE
WHS CONTRACTOR INFORMATION PACKAGE Introduction This information package provides Informa exhibitors and contractors with important information that will be required to plan and manage work on all stages
More informationGeneric Health and Safety Risk Assessment
Generic Health and Safety Risk Assessment Acheta Consulting Ltd Assessment completed by: Dr John Simmons (Managing Director), April 2017 Review date: May 2018 Introduction During the course of your work
More informationSAFE SYSTEM OF WORK PLAN (SSWP)
SAFE SYSTE OF WORK PAN (SSWP) WORKING IN GRAVEYARDS AND CEETERIES Safe System of Work Plan (SSWP) Guidelines The Safe System of Work Plan (SSWP) complements the Safety Statement required under the Safety,
More informationPLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO LOW LEVEL LIGHT UNITS
PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO LOW LEVEL LIGHT UNITS Project: Insert Client Repair/ Replacement of low level light units/ low level
More informationWINDMILL (pre-start) HAZARD INSPECTION CHECKLIST
Windmill Hazard Inspection Checklist WINDMILL (pre-start) HAZARD INSPECTION CHECKLIST Authorised by: LOCATION OF INSPECTION...... Inspected By (1)........... (2)..... PRINT PRINT Signature (1):. (2)....
More informationWestern Power Safe Work Method Statement Task details
Western Power Safe Work Method Statement Task details Description Install and Maintain V Overhead Equipment and Associated ardware (de-energised) DM 10716988 Approved by Manager, Work Practices Review
More informationWhat is an induction? Contribute to OH&S Processes
What is an induction? Session 2 Contribute to OH&S Processes Types of Induction New Employee Induction Site Inductions Equipment Inductions Activity 2.1 Induction Description What is a Hazard? Session
More informationSH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
More informationMethod Statement. Method Statement Details. Signatures. Emergency Contact Details 1/5
Highway Traffic Safety Ltd Lakeside House, 1 Furzeground Way Stockley Business Park Heathrow London UB11 1BD Tel: 02071 111655 Method Statement Method Statement Details Method statement number 4 Method
More informationJob Hazard Analysis and Mitigation page 1 of 8. February 7, 2008 Rev. 6. Task or Employee: AEG Field Core Functions (Rev. 6) Routine Non-routine
Job Hazard Analysis and Mitigation page 1 of 8 Task or Employee: AEG Field Core Functions () Routine Non-routine Retention: Completed Routine JHAMs are retained by the employee and supervisor. Non-routine
More informationPlant Hazard Identification and Risk Assessment
Plant information Plant item: Water Truck Plant identification details (asset/plant no.): Project: Competency required to operate the plant: MR/HR Licence / VOC List all legislation, codes of practice
More informationB S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
More informationHazard Identification and Risk Assessment Form. Risk Assessment
Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed
More informationSafe Work Method Statement Transmission Field Protection Services
Safe Work Method Statement Transmission Field Protection Services Purpose Permits Authorisations Training Equipment Fault finding on live V changeover/distribution boards N/A Electrical worker s licence,
More informationSafe Work Method Statement Transmission Field Protection Services
Purpose Permits Authorisations Training Equipment Electrical Access Permit (EAP) or Sanction to Test (STT) Electrical worker s licence, Network Authority Card (NAC), Recipient in charge (RIC), Tester in
More informationPLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS
PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO HIGH LEVEL LIGHT UNITS Project: (insert Client) Replacement/ Repair of high level light units/ high
More informationSAFE WORK METHOD STATEMENT Part 1. Company Details. Company Name: Contact Name, Position and Phone number: Address: Project details.
SAFE WORK METHOD STATEMENT Part 1 Company Details Company Name: ABN: Contact Name, Position and Phone number: Address: Project details Project: Area: Job Address: Job Description: Activity: Installation
More information