MM LITE Puck Wear Surfaces Replacement Rev.: B Page 1 of 5
|
|
- Karen Lamb
- 5 years ago
- Views:
Transcription
1 Rev.: B Page 1 of 5 PURPOSE This procedure provides instructions for replacing worn wear surfaces on the following MagneMover LITE pucks: Assy Number Description ML Gen 4 Puck Assy Replace by ML Gen 4.1 Puck Assy Replace by ML Gen 4.2 Puck Assy with PTFE Strip Replace by ML Gen 4.2 Puck Assy with UHMW Strip Replace by ML Gen 4.3 Puck Assy Replace by ML G5 Puck Assy CAUTION Strong Magnets To avoid severe injury, people with pacemakers and other medical electronic implants must stay away from the magnet array on the vehicles (pucks). To avoid injury from strong magnetic attractive forces: Handle only one vehicle (puck) or magnet array at a time. Do not place any body parts, such as fingers, between a vehicle (puck) or magnet array and any ferrous material or another magnet array. Vehicles (pucks) or magnet arrays not being used should be secured individually in isolated packaging. To avoid damage to watches, electronic instruments, and magnetic media (e.g., cell phones, memory disks/chips, credit cards, and tapes) keep these items away from the magnet arrays. RELATED DOCUMENTATION , MagneMover LITE User s Manual , Tandem Puck Wear Surfaces Replacement
2 Rev.: B Page 2 of 5 REQUIRED TOOLS AND EQUIPMENT The following tools, components, and equipment are required for this replacement procedure: NOTE: Depending upon replacement procedure being performed, some of the parts listed below may not be provided. Part Number Description Screw, Flat Head, M4 X 22 mm L, A4 SS, w/dri-loc 204 (2X) Assy, Top Plate, Puck, Gen 4, ML Preload Spacer, Compliant, Puck Center Plate, ML Center Plate, Puck, Ribs, G5, ML Strip, Protective, Puck Bottom, Wide, UHMW Glue Dot, Adhsv, Hi-Tack, Semi-Perm, Lo-Profile, Dia N/A N/A Isopropyl Alcohol Torque Wrench / with 2.5 mm Hex Bit PUCK ASSEMBLY AND COMPONENT IDENTIFICATION Figure 1 provides an exploded view of the puck assembly with component identification. M4 Screw (2X) Top Plate Glue Dot Spacer, G5 Spacer, G4 Center Plate Protective Strip Figure 1: Puck Assembly and Component Identification
3 Rev.: B Page 3 of 5 PUCK WEAR SURFACE REPLACEMENT PROCEDURE 1. For single pucks, remove the puck from the MM LITE transport system (refer to , MagneMover LITE User s Manual). For tandem pucks, remove the tandem puck assembly from the MM LITE transport system (refer to the MagneMover LITE User s Manual), then refer to , Tandem Puck Wear Surfaces Replacement, for puck removal from the tandem assembly. 2. Place the puck on a non-metallic work surface with the magnet array down. Keep the magnet array at least three feet away from metal objects and tools. 3. Remove the two screws securing the puck top and center plates to the magnet assembly using a 2.5 mm hex wrench. Lift the top plate, spacer, and center plate off the magnet assembly and properly dispose of those pieces being replaced along with the two screws (see Figure 1). 4. If there are o-rings on the threaded standoffs on the magnet assembly, remove the o-rings and dispose of properly. OPTIONAL Remove and Replace the Protective Strip A. Remove the protective strip from the magnet assembly. B. Clean the magnet assembly using isopropyl alcohol to remove any residue. C. Place the new protective strip on a flat surface with the adhesive side up and remove the adhesive protective backing from the strip (see Figure 32). NOTE: If a PTFE protective strip was used it will be replaced with a UHMW protective strip. D. Carefully center the magnet array over the center of the adhesive strip. Fold both ends of the strip over the sides of the array. Then fold the holes at each end of the strip over the threaded standoffs. NOTE: Do not stretch the protective strip. Stretching will reduce the life of the adhesive, causing the strip to peel away from the array. E. Press the strip into place using a burnisher to ensure there are no bubbles. Protective Strip Figure 2: Apply Protective Strip to
4 Rev.: B Page 4 of 5 5. Remove the backing from the glue dot and apply the glue dot to the center surface of the preload spacer (see Figure 3). Center Plate Preload Spacer Glue Dot Top Plate Figure 3: Apply G5 Compliant Spacer to Underside of Top Plate 6. Locate the preload spacer on the center hole on the underside of the top plate, ensuring the surface with the glue dot is fully seated and adhered to the top plate (see Figure 3). 7. Align the top plate with the center plate and press together (see Figure 3). 8. Locate the plate assembly over the standoffs on the magnet array and secure using the two M4 x 22 mm flat head screws with Dri-Loc 204, supplied with the repair kit, and tighten to 1.5 Nm [13 in-lbs] (see Figure 4). If using screws without pre-applied Loctite, use Loctite 243. NOTE: Once the screws have been installed, the Loctite must cure for 12 hours before using the puck. M4 Screws Plate Assembly Figure 4: Install Plate Assembly on
5 Rev.: B Page 5 of 5????????? Figure 5: Finished Replacement 9. For single pucks, replace the puck on the MM LITE transport system (refer to , MagneMover LITE User s Manual). For tandem pucks, replace the puck in the tandem assembly, refer to , Tandem Puck Wear Surfaces Replacement. REVISION HISTORY Rev. Revision Date Author Change Description A D. Rupp Initial release for G5 puck. B 2/9/2016 R. Surko Revised to use screws with pre-applied Loctite.
Rocky Mountain Element Technical Manual. Rev B
Rocky Mountain Element Technical Manual Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions... 6 1) Bearing Installation...
More informationRock. ky Altit. ude. Rev B
Rock ky Mountain Altit ude Technical Manual Date: August 17 th, 2016 Rev B 1 Table of Contents Materials Required... 3 Suspension Pivot Torque Guide... 4 Small Parts Torque Guide... 5 Assembly Instructions...
More informationAgilent 1290 Infinity Pump Head Maintenance
Agilent 1290 Infinity Pump Head Maintenance Technical Note Agilent Technologies Notices Agilent Technologies, Inc. 2012-2015, 2016 No part of this manual may be reproduced in any form or by any means (including
More informationHP10168 & HP10169 KITS HP10152 / HP10154 / HP10156
HP10168/&HP10154 HP10169/KITS HP10152 HP10156 HP10152: 2" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10154: 4" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10156: 6" AMP
More informationGENUINE CARGO NET INSTALLATION AND USER S INSTRUCTIONS
GENUINE CARGO NET INSTALLATION AND USER S INSTRUCTIONS Thank you for purchasing a genuine Mazda accessory. Before removal and installation, be sure to thoroughly read these instructions. Please read the
More informationSALCO PRODUCTS, INC. PRESSURE RELIEF VALVE STORAGE, INSTALLATION, OPERATING, MAINTENANCE/TESTING, AND INSPECTION INSTRUCTIONS
STORAGE INSTRUCTIONS Until it is time to install a new or reconditioned valve on the car, the valve must be kept in its original packaging in order to protect it from dirt and damage. INSTALLATION INSTRUCTIONS
More informationINSTALLATION GUIDE. Doc ID: Doc Rev:
REKLUSE MOTOR SPORTS The Rekluse Clutch Basket Kit INSTALLATION GUIDE Doc ID: 195-4113 Doc Rev: 021813 TOOLS NEEDED Center Punch & Hammer Drill Press or Drill Shop Press ¼ Driver Torque wrench (in-lb or
More informationSCOUT DECK ANCHOR 3 1/4" BONDING SCREW
SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR
More informationContents. Stainless Steel Side Block. 1.1 Separating the Side Block. Stainless Steel Side Block Reassembly of. Assembly from the Helmet Shell
Separating the Side Block Assembly from the Helmet Shell Contents SSB-1 SSB-3 SSB-5 SSB-5 SSB-7 1.1 Separating the Side Block Assembly from the Helmet Shell 1.2 Side Block Assembly Replacement 1.3 Defogger
More informationPaddle Bar Replacement
This procedure is to help facilitate the replacement of the 23 Paddle Bar Assembly on the ANKOM Dietary Fiber Analyzer. Note: The following items will be sent in a replacement package as part of the 23
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationInstalling a Christie One Mount/Christie One Mount Plus
Installing a Christie One Mount/Christie One Mount Plus This document provides instructions for installing the Christie One Mount or Christie One Mount Plus and optional accessories to mount Christie projectors
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Ballpark Classics Baseball Game MLB Edition Figure B Read the instructions completely before beginning g assembly. You will need a Phillips screwdriver. 1. Remove the game from the
More informationBackboard and Rim Owners Manual
REQUIRED TOOLS AND MATERIALS: Two (2) Capable Adults Tape Measure Backboard and Rim Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. Step Ladder - 8ft. (2.4
More informationINSTALLING THE BOLT-IN-PLACE FOOTPLATE KIT (FIGURE 1)
Bolt-In-Place/Spring Button Assembly and Installation Instructions Kits No. 1110266 and 1121271 SAVE THESE INSTRUCTIONS NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use.
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationLRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL WELKER RELIEF VALVE
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL WELKER RELIEF VALVE MODELS RV-1 RV-2 RV-2CP RV-3 DRAWING NUMBERS AD017A[ ] AD018A[ ] AD020A[ ] AD282BO MANUAL NUMBER IOM-033 REVISION Rev. E, 3/28/2016 TABLE
More informationDetroit Speed, Inc. A-body Rear Coilover Conversion Kit A-body (Moser Rear Axle) P/N: , , , , ,
Detroit Speed, Inc. A-body Rear Coilover Conversion Kit 1964-1972 A-body (Moser Rear Axle) P/N: 042411, 042412, 042413, 042417, 042418, 042419 The Detroit Speed, Inc. A-body Rear Coilover Conversion Kit
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationMaintenance and Repair. AirHawk II Air Mask. Second Stage Regulator. Order No.: /02 Prnt. Spec (I) MSAsafety.
Maintenance and Repair Second Stage Regulator Order No.: 10104241/02 Prnt. Spec. 10000005389(I) MSAsafety.com WARNING! Read this manual carefully before servicing the device. The device will perform as
More informationMODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST
MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read
More informationAnti-flood device Model B-1
December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET
More information3 Scotch-Weld Polyurethane Reactive Adhesive Applicator Replacement Part Installation Guide
3 Scotch-Weld Polyurethane Reactive Adhesive Applicator Replacement Part Installation Guide Description: AIR SUPPLY LINE KIT Product ID/Stock No.: 62-9895-0005-3 For use with: 3M Scotch-Weld Polyurethane
More informationLITERIDER 2&3 IMPORTANT WARNING. 2Bike (1x) Bolt (1x) Nut (1x) Small Hex Wrench (1x)
LITERIDER 2&3 3 Bike (1x) Bolt (1x) Flat Washer (2x) Nut (1x) Large Hex Wrench (1x) 2Bike (1x) wrench (1x) Small Hex Wrench (1x) keys (2x) Long Strap (1x) 2-Zip Strips (6x) 3-Zip Strips (9x) Wheel strap
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationPrecision Liquid Settlement Array Manual
Precision Liquid Settlement Array Manual All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change
More informationADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D A
ADJUSTABLE CAMBER PLATE KIT INSTALLATION INSTRUCTIONS PART NUMBER D160-0007A APPLICATION: 2014-2016 228i Coupe + xdrive (F22) 2015-2016 228i Convertible+ xdrive (F23) 2017 230i Coupe + xdrive (F22) 2017
More informationRocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
More informationFRAME FEATURES TABLE OF CONTENTS INTRODUCTION
R3 MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9 Seatpost Assembly & Installation...11
More informationGas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.
Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2
More informationALL NISSAN VEHICLES; "D" RING RESIDUE CAN CAUSE SLOW SEAT BELT RETRACTION
Classification: Reference: Date: RS01-001 NTB01-005 February 1, 2001 ALL NISSAN VEHICLES; "D" RING RESIDUE CAN CAUSE SLOW SEAT BELT RETRACTION ATTENTION: This bulletin supersedes NTB99-028. Please discard
More informationSCUBAPRO. Balanced Power Inflator
SCUBAPRO Balanced Power Inflator USE THIS GUIDE AS A REFERENCE WHEN SERVICING THE BALANCED POWER INFLATOR Important note: The following information is not designed to be a complete training guide for servicing
More informationALL NISSAN VEHICLES; "D" RING RESIDUE CAN CAUSE SLOW SEAT BELT RETRACTION
Classification: Reference: Date: RS01-001a NTB01-005a October 7, 2004 ALL NISSAN VEHICLES; "D" RING RESIDUE CAN CAUSE SLOW SEAT BELT RETRACTION This bulletin amends NTB01-005. Please discard all paper
More informationTABLE OF CONTENTS FRAME FEATURES INTRODUCTION
S3 DISC MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable
More informationTECH SHEET ORANGE PIVOT TOOL INSTRUCTIONS
page 1 ORANGE PIVOT TOOL INSTRUCTIONS This is a guide of how to change the pivot bearings on an Orange frame with a bore style pivot axle. 4 8 Bore Type Pivot Axle Horiz-Hold Type Pivot Axle Please read
More informationInstallation Procedure for your Disco Double Kit, by Airgun Lab, LLC.
Disco Double Installation Instructions Copyright Airgun Lab LLC Rev D January 2016 page 1 of 6 Installation Procedure for your Disco Double Kit, by Airgun Lab, LLC. Step 1, gather tools. Tools required
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationE-118 Assembly Guide
E-118 Assembly Guide Table of Contents Overview of the assembly.... 2 1. Fork installation.... 3-4 2. Cable housing installation.... 5 3. Handlebar installation... 6 4. Front brake installation.... 7-8
More informationUniversal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.
REQUIRED TOOLS AND MATERIALS: 2 Capable Adults Carpenter s Level 15 Tape Measure Pencil Universal Elevator Mount Owners Manual Customer Service Center N53 W2400 South Corporate Circle Sussex, WI 530 U.S.A.
More informationTABLE OF CONTENTS INTRODUCTION
R3 DISC MANUAL TABLE OF CONTENTS Introduction... 1 Frame Features... 2 Fork Preparation... 3 Small Parts... 5 Frame Preparation... 6 Brake Housing Installation... 7 Mechanical Cable Routing... 9 Electric
More informationTOURNAMENT ICE. 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual
TOURNAMENT ICE 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual Thank you for purchasing a Gold Standard Games product. All of us at Gold Standard Games want you to be
More informationRepair instructions. Pivot bushing replacement. XL-AS10001RM-en-DE Rev B
Repair instructions Pivot bushing replacement XL-AS10001RM-en-DE Rev B Table of contents Table of contents 1 General information... 3 1.1 Safety information...3 1.2 Legal information...4 1.3 Order and
More informationCombination Breathing Apparatus
and Combination Breathing Apparatus ULTRAVUE FACEPIECE TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec. 10000005389 (I) Mat. 10064385 Doc. 10064385 ULTRAVUE FACEPIECE COMPONENTS Item Part No. Description 800509
More informationw w w.ro swellmarine. com Part 1 Installation Part # C # C
w w w.ro swellmarine. com Pro Bimini Part 1 Installation Part # C915-119151 # C915-119152 Information: info@roswellmarine.com If you have any questions please call : 1-321-638-1331 REV 16-JUL-18 Moomba
More informationTECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION
Page 1 of 6 1. DESCRIPTION The Model B-1 Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET condition,
More informationUNITY 2. Uni-DAAMS Manual. Version 1.3 (Changes to Section 1.1) March 2010
UNITY 2 Uni-DAAMS Manual Version 1.3 (Changes to Section 1.1) March 2010 1. Introduction...2 1.1. Installing the DAAMS tube ovens...2 1.2. Swapping between tube types...5 1.3. Changing tube oven o-rings...6
More informationGurney Flap for WRX and STI w/low Profile Trunk Spoiler
Gurney Flap for 2015+ WRX and STI w/low Profile Trunk Spoiler 2017-12-05 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced
More informationICE PROTECTION - PROPELLER
ICE PROTECTION - PROPELLER. DESCRIPTION This section describes the portion of the Ice Protection System pertaining to the propeller. This includes the slinger ring and the de-icing propeller boots. Grooved
More information275 RID Assembly Instructions
75 RID Assembly Instructions Part No. 0003003 v. Lscsep0 PARTS LIST (Specifications and contents subject to change without notice) Description Part # A. RID Track...0000050 B. Capacity Plate...0053 C.
More informationCaliber Sled Wheels Assembly Instructions for PN and 13579
Caliber Sled Wheels Assembly Instructions for PN 13576 and 13579 Caution: Read all instructions before assembling or using Sled Wheels. Follow the steps in order. Only use Sled Wheels as intended, following
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationInstallation Troubleshooting Maintenance Instructions Installation / Start-up
Model ZW207 Installation Troubleshooting Maintenance Instructions Installation / Start-up NOTE: Flushing of all pipe lines is to be performed to remove all debris prior to installing valve. 1. For making
More informationCentriFlow Meter Integrated Air Entrainment System
CentriFlow Meter Integrated Air Entrainment System INSTALLATION & OPERATION MANUAL January 2004 Revision 021-4 EASTERN INSTRUMENTS 416 LANDMARK DR. WILMINGTON, NC 28412 910-392-2490 Fax: 910-392-2123 website:
More informationThermoVault Max. Extreme Temperature Thermal Barrier. Product User Guide
ThermoVault Max Extreme Temperature Thermal Barrier Product User Guide Product User Guide Product Overview The ThermoVault Max is an extreme, high temperature thermal barrier designed for use with the
More information12S 1st Stage. -Maintenance Procedure-
12S 1st Stage -Maintenance Procedure- 1 Warning! All maintenance and repair procedures MUST be performed by a Mares authorized Service Center and/or Distributor. Therefore, the information provided below
More informationR3 RIM MANUAL EN. Version 1 I
R3 RIM MANUAL EN Version 1 I 07.02.2017 TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9
More informationE-116 Assembly Guide
E-116 Assembly Guide Table of Contents Overview of the assembly.... 2 1. Cable housing installation.... 3 2. Front brake installation.... 4 3. Rear brake installation... 5-6 4. Seatpost installation....
More informationRocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017
Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...
More informationCRANKSET 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY CHAIN LINE SIZE 52/39 53/39 55/42 54/42 50/34 52/36. Ultra - torque 11s ULTRA-TORQUE
ULTRA-TORQUE 1 - TECHNICAL SPECIFICATIONS STANDARD BOLT CIRCLE DIAMETER CHAIN LINE MINIMUM CHAINSTAY LENGHT AXLE THREADS 52/39 53/39 55/42 54/42 COMPACT BOLT CIRCLE DIAMETER CHAIN LINE MINIMUM CHAINSTAY
More informationGrow to Pro Basketball
7208c-0920.qrk /2/02 : PM Page 1 Grow to Pro Basketball Model Number: 7208 Product features and decoration may vary from the photograph above. Please keep this instruction sheet for future reference, as
More informationSGY-PM910H2/HL/LR ChainRing Adapter Installation Manual
SGY-PM910H2/HL/LR ChainRing Adapter Installation Manual 1 Table of Contents Table of Contents... 2 1 Assembling the Chainring and Installing the Right Transmitter... 3 2 Installation procedure of the adapter
More informationUniversal Anchoring Adapter For Mercedes
Universal Anchoring Adapter For Mercedes Anchoring Pin & Tube Set (For Most Mercedes Models) Users Manual 006 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S
More information30 magnetic sweeper with wheels
30 magnetic sweeper with wheels Model 93245 assembly and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
More informationELECTRON PRO: ASSEMBLY GUIDE. Revision Valid for MY2017 Electron Pro
ELECTRON PRO: ASSEMBLY GUIDE Revision 1.0 10-20-2016 Valid for MY2017 Electron Pro ELECTRON PRO: Table of Contents 1. Tools Needed and First Aid Kit...3 2. Specifications...4 3. Configurations...5 4. Geometry...7
More informationOnly. Gives You the TechLock. System Advantage ASSEMBLY, DISASSEMBLY AND TROUBLESHOOTING INSTRUCTIONS FOR 3000 SERIES FONTAINE
April 00 Only Gives You the TechLock System Advantage ASSEMBLY, DISASSEMBLY AND TROUBLESHOOTING INSTRUCTIONS FOR 000 SERIES FONTAINE C o n n e c t y o u r b u s i n e s s w i t h F O N T A I N E April
More informationFRAME FEATURES TABLE OF CONTENTS INTRODUCTION. A guide to your Cervélo C Series frame.
C SERIES MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable
More informationCarter Option X Valve connector assembly. Maintenance manual
Carter Option X Valve connector assembly Maintenance manual Table of contents Description Page 1.0 Introduction... 3 1.1 Safety equipment and procedure... 3 1.2 Maintenance safety alerts... 3 2.0 Equipment
More information4-Ball Lowers 750cc, 1000cc, 1500cc, and 2000cc Models
Instructions - Parts List Repair Kits Accessory Kits Related Manuals See page 28 4-Ball Lowers 750cc, 1000cc, 1500cc, and 2000cc Models 3A0539L EN Designed for low pressure, high volume circulation of
More informationTraditional Basketball Set. Assembly & Installation Instructions
Traditional & Pro Style Basketball Set Assembly & Installation Instructions Traditional Basketball Set Pro Style Basketball Set 3 0 5 0 S. A L V E R N O N W A Y T U C S O N, A Z 8 5 7 1 3 5 2 0. 7 9 0.
More informationSOTR Special Operations Tactical Respirator
SOTR Special Operations Tactical Respirator OPERATOR S MANUAL FOR INDIVIDUAL RESPIRATORY PROTECTION OPS-CORE 2018 OMM G055-1000 REV. B INTRODUCTION ABOUT YOUR SOTR The Ops-Core Special Operations Tactical
More informationwww.aquaglidekayak.com WORK SPACE AND TOOLS 1. Take care to position yourself in a clean, dry area with good ventilation. For proper curing of adhesives, temperature should remain above 10 C (50 F).
More informationINSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)
INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationINSTALLATION INSTRUCTIONS A-Arm Guards, Rear Part Number: Application: Kawasaki Brute Force 750 4x4i
INSTALLATION INSTRUCTIONS A-Arm Guards, Rear Part Number: 88342 Application: 2012+ Kawasaki Brute Force 750 4x4i GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To
More information830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19
830 SureFlo Soap Systems Installation Instructions Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 INSTALLATION INSTRUCTIONS SureFlo SOAP DISPENSING SYSTEM FOAM VERSION ONLY B-830 Foam
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More informationPoppetted Coaxial Drop Tube Assembly for use with Auto Limiter II. Installation Instructions
Poppetted Coaxial Drop Tube Assembly for use with Auto Limiter II Installation Instructions Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608 838
More informationPressure Injection Cell Operator s Manual
Pressure Injection Cell Operator s Manual Operator s Manual Pressure Injection Cell CONGRATULATIONS! Congratulations on your purchase of a Next Advance Pressure Injection Cell. Please read this operator
More informationDirectional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationAmerican Meter Co. Five-Year Limited Warranty Industrial Regulators
Read carefully and follow all instructions shipped with this regulator. The incorrect specification or installation of this equipment could result in escaping gas, and pose a potential explosion hazard.
More information3190A NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS. Series MODEL NO
NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS Series 30A Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. The Exploded Diagram
More informationPIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure
PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure This maintenance guide provides detailed instructions to replace the chain ring of the Shimano Steps E8000 E-bike system should something malfuction
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationINCLINE SLIDE ROWER SF-RW5720 USER MANUAL
INCLINE SLIDE ROWER SF-RW5720 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationRD(H)20/25 Pressure-Reducing Regulator User Manual
RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be
More informationCRANKSET 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY CHAIN LINE SIZE 53/39-55/42-54/42 BORA ULTRA. 11s BORA ULTRA CRANKSET
BORA ULTRA 1 - TECHNICAL SPECIFICATIONS 53/39-55/42-54/42 BOLT CIRCLE DIAMETER CHAIN LINE MINIMUM CHAINSTAY LENGHT AXLE THREADS 1.1 - CHAIN LINE SIZE Chain line for double crankset (Fig, 1) LINEA CHAIN
More informationDIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D
OPERATOR'S MANUAL DIRECT DRIVE DIXIE DOUBLE SEAMER Model 25D LUBRICATE DAILY: A. Gears inside gear housing at chuck shaft (1) Oil B. Seam rolls and cam rolls (4) - Oil C. Seam roll levers through gear
More informationRHPS Series PRV 6 User Manual
RHPS Series PRV 6 User Manual Read the complete manual before installing and using the valve. 1 WARNING Before removing a valve from the system for service, you must depressurize system purge the system
More informationX-PRESS STAGE SYSTEM OWNER S MANUAL. TOOLS REQUIRED Allen Wrench (provided)
X-PRESS STAGE SYSTEM BEFORE YOU BEGIN... Read and understand these instructions before operating. Use caution and care for your back when lifting, pushing, pulling, or folding and unfolding these units.
More informationPP-1, PP-1W, PP-2, & PP-3
Welker Pitot Probe Model PP-1, PP-1W, PP-2, & PP-3 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and maintenance
More informationWritten By: Evan Noronha
Replace the home button, including the Touch ID fingerprint reader in an ipad Pro 12.9". Written By: Evan Noronha ifixit CC BY-NC-SA www.ifixit.com Page 1 of 27 INTRODUCTION Use this guide to replace the
More informationPure-Flo Handwheel Operated Valves (903, 913, 963) Instruction Manual
PFMM-08 Pure-Flo Handwheel Operated Valves (903, 913, 963) Instruction Manual This manual provides installation, operation and maintenance instructions for Pure-Flo Diaphragm Valves (with 903, 913, 963
More informationAdvancedTrak Rudder Kit AE4005. Assembly and Installation Instructions
AdvancedTrak Rudder Kit AE4005 Assembly and Installation Instructions Thank you for your purchase of the Advanced Elements AdvancedTrak Rudder Kit! A Kayak Rudder is a great way to enhance the tracking
More informationAvery Dennison Instructional Bulletin 1.4 Application Methods for Pressure Sensitive Adhesive Films
Rev. 2 (April 2016) Avery Dennison Instructional Bulletin 1.4 Application Methods for Pressure Sensitive Adhesive Films Introduction Avery Dennison pressure sensitive adhesive films are available in a
More informationInstallation Instructions For Flat Seated Bolted Type RAH Series Disk Holders
Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder
More informationDesign Based Anchoring 2009 FORD F-150
Design Based Anchoring OWNERS MANUAL USERS MANUAL 2008 Chief Automotive Technologies. CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from date of installation
More informationTRAILMATE METEOR ASSEMBLY MANUAL
TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster
More information