Free2Go Instruction Guide
|
|
- Ethan Pierce
- 5 years ago
- Views:
Transcription
1 Free2Go Instruction Guide Updates to these instructions will be posted on Please check back from time to time. WARNING: The device is designed for 1 and only 1 bicycle at a time. Do not use it for more. The device supports standard bikes with extra gear weighing less than 45lbs. Using the device to carry more weight could result in damage to the bike, car, etc. Do not stand on the device either when it is installed or not. This device was not designed for off-road use or consistently bad and pitted roads. Check strapping system for shifting/loosening every miles(on highway), 3-5 miles (in the city). For Free2Go to operate correctly you must install it as specified in the instructions. Do not leave Free2Go installed on the car when it is not transporting a bicycle. 3. One at a time take each Base Mount Assembly(F9) and D-ring Strap(F7) thread the end of the base mount through the D-ring Strap as shown then screw the base mount into the bumper tow hole. We have found that once you get an understanding of the steps you will be able to repeat them with great proficiency. We recommend you install and uninstall SEVERAL times before transporting a bike so that you are confident in its use. Note: Once you get familiar you will be able to install and uninstall in a matter of minutes. a. When the Base Mount Assembly (F9) has been modestly tightened into the tow hole use the Base Mount Knob (F3) to allow the Base Mount Stirrup (F2) to sit parallel to the bumper. Once parallel re-tightened the Base Mount Knob (F3). Please ensure the D-Ring is positioned as show with the strap directed at the angle it will be tightened. 1. Confirm you have all components of Free2Go (Figure 1 F1-F9) (for more info on some topics scan this using your smartphone. Download apps here Full installation video) 2. On the rear bumper of Smart Cars you will see 2 tow hole covers. Using your key end, remove these covers and store. b. Rotate the Base Mount Strap (F1) into a position to receive the bicycle tires.
2 (more info: Base Mount Stirrup) 4. Install the Stabilization Strap (F5) on the bicycle. Position the front bike tire pointing straight forward. Thread one end of the Stabilization Strap (F5) through the spokes of the tire and around the bike down-tube. Thread strap end through buckle. Press the release lever and feed webbing up from the bottom and under the cam buckle teeth as shown. (Front Tire Stabilization Strap) Pull the strap tight so as to limit the front tires ability to move more than 3-4 to either side. This strap is responsible for keeping the bike in an upright position on the Base Mount Assemblies(F9). 5. Apply protection Pads (F8) What you do here depends on the type of bicycle you have. It is recommended that during the initial uses of the rack you apply the pads to the handlebar and the pedal that are on the side of the bike that may come in contact with the car. The bicycle may point in either direction, you simply have to choose one that works for you. In our pictures and videos we have chosen to position the front tire to the left.
3 down over the strap. Leave the strap and buckle hang outside the hatch until Step 13 when you attach it to the bike. more info: J-Hook Strap) 6. Install the J-Hook Strap(F6) by affixing the J-hook to the D-ring that is inside the rear hatch area of both the cabrio and coupe Smarts. Feed the strap end either through lower edge of the rear hatch window (coupe) or at the seam of the soft top and the rear hatch (cabrio) such that the cam buckle is outside of the rear hatch area. NOTE: you may have to move the cam buckle into position outside the car before using. Pull the strap towards the back of the car, holding it low, below the hatch window and close the Hatch window or Cabrio lid (more info: D-Ring Strap)
4 7. Lift the bike onto both Base Mount Assemblies (F9) ensuring the pads(f8) installed in Step 5 are on the side closest to the car. For longer wheel bases it may be necessary to adjust the Base Mount Assemblies (F9) to fit the tires properly. (more info: Mount Base Assemblies) At this point it should be possible to rest the bike onto of the Base Mount Stirrups without it moving. If it does move left or right please tighten the Base Mount Assemblies and/or the Base Mount Knob(s). 8. Take the end of either of the 2 D-Ring Straps(F7) and feed it up between the bike and the car, around the head-tube (or seat post). Take the time here to ensure the tires fit nicely onto the Base Mount Stirrups (F2). This is achieved by having both tires set on the base mounts with the Base Mount Stirrups at a common angle. Position the bike pedal that you have applied the Pad(F8) to at the edge of the license plate in a horizontal position(if it touches the car). Position the handle bar Pad(F8) to protect the rear hatch from the handlebar itself(if it touches the car). (Bike removed to show the direction/position to be used with the D- Ring Straps)
5 Then thread the end into the cam buckle attached to the strap. (Threading the strap into the buckle at an angle is easier than trying to thread it straight through). NOTE: Be careful not to wrap the strap around anything that is sharp or abrasive. Ensure when pulling the strap tight through the buckle that the strap will not slip/move from its installed position. Pull the strap end through the cam buckle so that it is taught. Do not fully tighten at this time. 8. Repeat #7 for the other D-Ring Strap (F7). (more info: D- Ring Straps) 9. When the D-Ring Straps (F7) are taught, you will secure the bike wheels to the Base Mount Stirrups (F2) by threading the Base Mount Strap(F1) through the tire/spokes/rim and attaching it to the end of the Base Mount Stirrup such that the tire is firmly secured to the Base Mount Stirrup(F2).
6 10. Repeat Step 9 for the other wheel. NOTE: Ensure strap must be fully connected to the Stirrup end. 11. Tighten the D-Ring Straps attached in Step 8 and 9, one at a time. Pull up on the D-Ring Strap (F7) end to tighten down the bike. You may have to press on the tab of the alloy cam buckle as shown in Step 9 to pull the strap through if there is slack in the strap. Switching back and forth between both straps until the bike is upright and unable to move left or right, forward or backward. Ensure that the bike is centered on the bike mounts when tightened. If the bike significantly favors the left or right side, loose the D-Ring straps, reposition the bike and retightened the D-Ring straps and the Base Mount Knob(F3), if necessary. 14. The bike must not move when pull towards you or pushed towards the car while in a standing position behind the car. Adjust any necessary strap as described above to ensure the bike is firmly in position for travel. It is recommended to install and uninstall Free2Go a few times to get the hang of it. Also, during your initial uses of Free2Go check strapping after a few miles to ensure you have everything set, then periodically after that during your trip. 13. Feed the J-Hook Strap(F6) end around the cross bar or seat post of the bike, then thread the end back through the cam buckle. Pull on the strap end through the cam to tighten, then close the CAM buckle onto the strap to secure it.
7 Uninstalling Free2Go To uninstall Free2Go after transporting a bicycle please perform the Installation steps 1 14 in reverse. Unattaching, Untightening and Unscrewing. Free2Go is Patent Pending with US Patent Service. Storage When storing Free2Go please ensure: 1. All components are cleaned of dirt/debris and are fully dried before placing in a rolled up or closed area(box, bag, etc) 2. Store all components together, or in a convenient manner to re-use. Extra Protection Two small pieces of rubber have been provided to act as a gasket between the D-Ring strap hardware and the car bumper should the contact be of a concern. Questions and Comments Please use our Facebook site to us questions/comments. We will strive to respond to your questions within 24 hrs. Additionally, you may us at Support@FortheSmart.com. Visit our Website Please be aware that in certain jurisdictions the obscuring of a license plate is not allowed. If this is a concern to you we recommend repositioning the license plate.
VERSA BIKE RACK INSTRUCTIONS
VERSA BIKE RACK INSTRUCTIONS Models #8, 8 Important This rack is designed for use with a or. receiver hitch. The rack is designed to hold a maximum of two bicycles. Do not use it for anything other than
More informationHoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)
HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY
More information3 BIKE STRAP BIKE RACK - SR3162
3 BIKE STRAP BIKE RACK - SR3162 Adjustable hub assemblies Upper support frame 80" Strap Cam buckle Bike support arms Rubber bumper Lower support frame WARNINGS / LIMITATIONS Ensure that the hooks do not
More informationpage 2 Attachment of the upper straps to the vehicle. With the boot still open, wrap the strap around the boot lid.
Open the boot of the vehicle From inside, thread the straps over the top edge, between the boot and roof, leaving the dumbbells hanging free inside the vehicle (ensuring they will not be crushed when shut.)
More informationLadies Shopper Bike Assembly Manual 28C03
Ladies Shopper Bike Assembly Manual 28C03 Ecosmo Ltd 1 Know your bike 1. Wheel 2. Rear Derailleur 3. Chain 4. Crank Set 5. Pedal 6. Seat Quick Lock 7. Saddle and Post 8. Frame 9. Front Light 10. Front
More informationParts List. 7. Handlebars 8. Grips 9. Handlebar Stem 10. Front Brake 11. Front Wheel 12. Crank 13. Chain
Woodworm Cruise Parts List 1. Free Wheel with Rear Hub 2. Fenders 3. Fender Stay 4. Quick Release 5. Saddle 6. Seat Post 7. Handlebars 8. Grips 9. Handlebar Stem 10. Front Brake 11. Front Wheel 12. Crank
More informationE-trike Li Assembly Guide
PREPARATION 1. Read this assembly manual BEFORE commencing assembly. 2. Carefully remove all the components and packaged hardware from the shipping boxes. 3. Unpack the contents of the large double box
More informationLITERIDER 2&3 IMPORTANT WARNING. 2Bike (1x) Bolt (1x) Nut (1x) Small Hex Wrench (1x)
LITERIDER 2&3 3 Bike (1x) Bolt (1x) Flat Washer (2x) Nut (1x) Large Hex Wrench (1x) 2Bike (1x) wrench (1x) Small Hex Wrench (1x) keys (2x) Long Strap (1x) 2-Zip Strips (6x) 3-Zip Strips (9x) Wheel strap
More informationFinal Assembly Instructions Bikes with Quill Stems
Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
More informationTrike-Bike Assembly Manual
Be sure to check our website for more instruction details, videos and photographs as well as a complete listing of each Nut and Bolt for the Trike Bike. www.trike-bike.com.au Go to the page marked ASSEMBLY
More informationBackCountry ebikes 2019 MULE Assembly
BackCountry ebikes 2019 MULE Assembly Required Tools: Cutting Pliers (to cut box poly strapping and heavy bike banding) Scissors (to remove bubble wrap) Allen wrenches (3mm, 4mm, 5mm, 6mm) Wrenches (10mm,
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationBike Rack and Spare Tire Carrier 1-1/4" Receiver
Bike Rack and Spare Tire Carrier 1-1/4" Receiver OWNER'S MANUAL Rev: 11.15.2017 Page 1 Bike Tire Carrier 1.25 Owners Manual TABLE OF CONTENTS Safety Information 2 Product Information 2 Installation 3 Installation
More informationParts: Included in the parts box: Inner Rear Tire Tray. Inner Front Tire Tray. Trail Doc Clamp. Pivot Assembly. Trail Doc Post.
NV 2.0 2 Parts: Outer Front Tire Tray Inner Front Tire Tray Outer Rear Tire Tray Inner Rear Tire Tray Pivot Assembly Trail Doc Clamp Trail Doc Post Included in the parts box: 6mm Allen Wrench M6 Lock Washer
More information#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)
Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic
More informationMini Glider Manual. Your Glider comes partially assembled. The front wheel and the handlebars require assembly.
Mini Glider Manual Congratulations on your purchase of the Mini Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and
More informationMODEL: FIXIE / TRACK
STEP BY STEP BUILD GUIDE MODEL: FIXIE / TRACK TABLE O F CON TENTS TOOLS 1 LET S GET STARTED 2 INSTALLING THE HANDLEBAR 3 INSTALLING THE FRONT WHEEL 4 ALIGNING THE STEM 5 INSTALLING THE SEATPOST 6 OPTIMIZING
More informationFolding Dual Suspension MTB. Instruction Manual
Folding Dual Suspension MTB Instruction Manual Introduction The Stowabike Folding MTB has been made to last and with proper maintenance, it will give you years of enjoyable rides and journeys. The following
More informationASSEMBLY GUIDE AROUND THE BLOCK - 1, 3, 7, & 21 SPEED SIXTHREEZERO
ASSEMBLY GUIDE AROUND THE BLOCK - 1, 3, 7, & 21 SPEED SIXTHREEZERO OUR COMMITMENT We want you to love your bike as much as we do. If you run into any issues, no matter how small, let us know and we ll
More informationINSTALLATION INSTRUCTIONS
KIT CONTENTS: INSTALLATION INSTRUCTIONS PART NUMBER: DESCRIPTION: E361SXA302 roof MOUNT BICycle CARRIER SINGLE Short Carriage Bolt 1x Long Carriage Bolt 3x Over-Molded Wrench 1x Button Head Screw 2x Washer
More informationSanta Fe Cycles Assembly Guide Introduction
Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and
More informationHOME ASSEMBLY INSTRUCTIONS
HOME ASSEMBLY INSTRUCTIONS This Papillionaire Bicycle now belongs to you. It will take you to work, wait patiently outside your local cafe, and carry your groceries home. This is the start of your long-term
More informationEZee Glider Manual. Tools needed for Assembly: Wrench (included) Philips Screwdriver (not included) Assembly Instructions
EZee Glider Manual Congratulations on your purchase of the EZee Glider! Your glider is designed for years of nearly carefree use by your child. These instructions include how to set up your glider and
More informationINSTALLATION INSTRUCTIONS. Parts List. Tools Required. Before You Begin. Installation. Customer Information BICYCLE ATTACHMENT JUL.
INSTALLATION INSTRUCTIONS JUL. 2006 Parts List Bicycle attachment Key plates (2) Tools Required Phillips screwdriver Flat-tip screwdriver Before You Begin Customer Information This Bicycle Attachment is
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS KIT CONTENTS: PART NUMBER: DESCRIPTION: E361SXA300 ROOF MOUNT BICYCLE CARRIER B9 TRIBECA Short Carriage Bolt Long Carriage Bolt 3x Over-Molded Wrench Button Head Screw 2x Washer
More information8MAY15 US RACK, Inc Falcon Drive, Madera, CA
8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following
More information2018 ACCESSORY ATTACHMENTS OWNER S MANUAL
2018 ACCESSORY ATTACHMENTS OWNER S MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV031418 Welcome Thanks you
More informationUSER MANUAL. you pedal, something amazing happens
TM USER MANUAL you pedal, something amazing happens THANK YOU! In our humble beginnings we ran a bike-powered smoothie booth at Northern California music festivals called The Juice Pedaler. We saw the
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationImportant Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.
Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt
More informationUNPACKING AND ASSEMBLING YOUR DIAMONDBACK ROAD BIKE
EMAIL SIGNUP BIKE REG SEARCH BIKES THE RIDE HEALTH FITNESS SKILLS SHOP MAINTENANCE CYCLING 101 RIDERS LIKE YOU TEAMS SUPPORT UNPACKING AND ASSEMBLING YOUR DIAMONDBACK ROAD BIKE 1. Begin by carefully cutting
More informationBICYCLE ASSEMBLY INSTRUCTIONS. dutchcycles.com.au. Distribution Centre
BICYCLE ASSEMBLY INSTRUCTIONS dutchcycles.com.au Distribution Centre Shed 68, 400-422 Somerville Road, Tottenham, VIC 3012 email: service@dutchcycles.com.au BICYCLE COMPONENTS KEY INTRODUCTION CONGRATULATIONS
More informationFinal Assembly Instructions Bikes with 16 Wheel Size
Final Assembly Instructions Bikes with 16 Wheel Size Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
More informationSANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY
SANTANA STOWAWAY TANDEM WITH AIRLINER SAFECASE AND FTS FOAM TRAY SYSTEM ASSEMBLY AND DISASSEMBLY Congratulations! You are now the proud owner of the world s most travel-ready, performance tandem. The following
More informationCRUZBIKE Quest 2.0 Assembly
CRUZBIKE Quest 2.0 Assembly CRUZBIKE Quest 2.0 Assembly... 1 General notes on assembly... 2 Un box and evaluate the frame and major parts... 2 Unfold the rear swing arm and arrange the frame... 3 Rear
More informationINDOOR CYCLING BIKE SF-B1110 USER MANUAL
INDOOR CYCLING BIKE SF-B1110 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationBABYSEAT II. Suspension Child Carrier
BABYSAT II Suspension Child Carrier User's Guide D FR S IT JP KR CHS User needs check whether there are any laws specific to the carrying of children in seats attached to cycles that apply in the country
More informationSAVE THESE INSTRUCTIONS. NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Walking Tutor, Installation and Operating Instructions Model No. WT 200 SAVE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further
More informationThank you for purchasing a WIKE BOX BIKE!
Thank you for purchasing a WIKE BOX BIKE! Contents Safety.....3 Front wheel.4 Kickstand..5 Handle Bar & Box 6 Seat post and Saddle 7 Final pre-ride check 8 Tools needed to assemble Bike: -High table or
More informationCopyright Velocomp LLP 2006
ibike Pro Cadence Handlebar Mount Owners Manual January 2007 1 Table of Contents Installing the ibike Pro cadence mount on your bicycle Installing the ibike Pro cadence mount on your time trial bike Installing
More information7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike
7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike Owner s Manual Made in Taiwan INDEX IMPORTANT SAFETY INFORMATION... 1 EXPLODED DRAWING... 2 PARTS LIST... 3 ASSEMBLY INSTRUCTION... 4-9 USER
More informationBICYCLE TO MOTORCYCLE BICYCLE RACK
BICYCLE TO MOTORCYCLE BICYCLE RACK Install Manual Warning: You are responsible for securing the rack to your motorcycle., checking the attachments prior to use and periodically inspecting the products
More informationMODEL: COMMUTER / ROAD BIKE
STEP BY STEP BUILD GUIDE MODEL: COMMUTER / ROAD BIKE TABLE OF CONTENTS TOOLS 1 LET S GET STARTED 2 INSTALLING THE QUILL STEM 3 INSTALLING THE FRONT FENDER 4 INSTALLING THE QUICK RELEASE 5 INSTALLING THE
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More information222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions
222 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions FITNESS SAFEGUARDS AND WARNINGS Before starting any exercise program, consult with your
More informationAssembly Instructions. -Cantilever Boat Lifts
Assembly Instructions -Cantilever Boat Lifts Winch Instruction Page Safety Information 1. The winch is built for the multipurpose of hauling and lifting operations. It is not to be used as a hoist for
More informationBefore you start! Is iwalk 2.0 right for you?
Before you start! Is iwalk 2.0 right for you? Physical Abilities Requirements 1. Stair Test Before your injury, could you easily walk up and down stairs at normal speed, without using the hand rail? 2.
More informationBike Rack and Tire Carrier
Bike Rack and Tire Carrier OWNER'S MANUAL Rev: 10.26.2017 Page 1 Bike Rack and Tire Carrier Owners Manual TABLE OF CONTENTS System 2 Description 2 Prior To Operation 3 Manual Slide-Out Bike Rack Operation
More informationUSER S MANUAL QUESTIONS? CAUTION. Model No. FMEX Serial No. Write the serial number in the space above for reference. Serial Number Decal
Model No. FMEX81110.0 Serial No. Write the serial number in the space above for reference. USER S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please
More informationBELT DRIVE INDOOR CYCLING BIKE SF-B1712
BELT DRIVE INDOOR CYCLING BIKE SF-B1712 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationIMPORTANT WARNING SOUL PAD (2X) PAD STRAP (4X) S.U.P. BRAH (1X) KEYS (2X) RIPCORD (2X) HOOK (2X) NOSE/TAIL STRAP (2X)
SOUL PAD (2X) PAD STRAP (4X) S.U.P. BRAH (1X) KEYS (2X) HOOK (2X) RIPCORD (2X) NOSE/TAIL STRAP (2X) IMPORTANT WARNING IT IS CRITICAL THAT ALL YAKIMA RACKS AND ACCESSORIES BE PROPERLY AND SECURELY ATTACHED
More informationHave questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST
1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained
More informationProduct Overview: Key Features:
APGL4 Model Tripod Product Overview: The Ravelli APGL4 is a Professional Quality Tripod providing a solid base for high-end photographic equipment. This model is all pressure treated aluminum alloy construction
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory (ROOF) P/N 08L07-E09-100 Application 6 PILOT Publications No. Issue Date JUN 5 PARTS LIST 6 Washers Bicycle attachment 2 Brackets Hex wrench 4 Knobs 2 Keys 1 Rear Bracket
More informationcomfort without compromising on performance and to fit your various needs on touring,
Congratulations on your purchase of Goal-26X. Goal-26X is made to enhance comfort without compromising on performance and to fit your various needs on touring, shopping and communicating. Let s have fun
More informationASSEMBLY GUIDE TRUE GRIT. LaufCycling.com
ASSEMBLY GUIDE TRUE GRIT LaufCycling.com Congratulations on your True Grit! We understand you are in a hurry to go riding a.s.a.p. - but please take a deep breath and read this installation guide first.
More informationmodel - CYPRESS DX W
Contents model - CYPRESS DX W Maintenenace manual Read and Save these instructions Welcome Contents 1 Preparing Nothing makes us happier than seeing people out riding bikes. For over thirty years Giant
More informationFIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
More informationES-701 INSTRUCTIONS FOR USE
BIKE ES-701 MANUAL ES-701 INSTRUCTIONS FOR USE 1) The model ES-701 is designed to be used as a group cycle in fitness studios and health clubs. It has a fixed wheel driven flywheel and should only be used
More informationPectoral Machine. User manual E S S E N T I A L S T R E N G T H
E L E M E N T and the cable E S S E N T I A L S T R E N G T H User manual 1 and the cable and The identification plate of and manufacturer, affixed on the back panel of the weight stack, gives the following
More informationMounting Instructions 2010 Wolfman Expedition Dry Saddlebags or Teton Saddlebags to another brand of Rectangular Side Rack.
Mounting Instructions OTHER 2010 Wolfman Expedition Dry Saddlebags or Teton Saddlebags to another brand of Rectangular Side Rack. Thank You for purchasing our new 2010 Wolfman Products Please Note: The
More informationPART NUMBER: E361SXA200 DESCRIPTION: KAYAK CARRIER
A KIT CONTENTS: : Plug 16x Long Carriage Bolt 4x Hex Key 4x Button Head Screw 4x Pad Strap BASE Over-Molded Wrench 1x SnapAround 4x 1/5 : Important Notes: Minimum crossbar spread of 24". If spread is less
More informationHave questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST
1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained
More informationASSEMBLY GUIDE: Izip & Ezip Electric Bicycles with Rack-Top Mounted Batteries ( RTMB Bicycles )
ASSEMBLY GUIDE: Izip & Ezip Electric Bicycles with Rack-Top Mounted Batteries ( RTMB Bicycles ) Please Refer to your Owner s Manual for Detailed Setup Instructions Technical & Customer Service: 1-800-377-4532
More informationItem N o.: Item N am e:southern Star 40cm Girls Cherry Bike
Item N o.:42174868 Item N am e:southern Star 40cm Girls Cherry Bike Tighten them so they do not move and are horizontal. Check the handlebar is in good condition and the ends of the handlebar are
More informationRADROVER REAR RACK INSTALLATION MANUAL
RADROVER REAR RACK INSTALLATION MANUAL WWW.RADPOWERBIKES.COM We are here to help! Please contact us at SUPPORT@RADPOWERBIKES.COM or 1-800-939-0310 if you have questions. REV022216 Welcome Thanks you for
More informationDM-MARD (English) Dealer's Manual. ROAD MTB Trekking. City Touring/ Comfort Bike REAR DERAILLEUR XTR RD-M9100 RD-M9120
(English) DM-MARD001-00 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE REAR DERAILLEUR XTR RD-M9100 RD-M9120 CONTENTS CONTENTS...2 IMPORTANT NOTICE...3 TO ENSURE SAFETY...4
More informationUser Manual Important, read before use!
EN User Manual Important, read before use! SMART Congratulations on your new rollator! Volaris Smart The Volaris Smart will make your life easier in many ways. We ask you to read carefully through this
More informationSPINNER RIDE GETTING STARTED GUIDE. Welcome to a personalized fitness experience for your members
This addendum accompanies your equipment documentation and is additional information concerning the heart rate features for your equipment and console. Important The heart rate feature is intended for
More informationRS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)
Warranty Period : 1 year (from the date of your purchase) RS-1700 Bicycle Maintenance Stand instructions manual (ver.1.2 2016/12) For more details, read the attached "Minoura Limited Warranty Policy" card.
More informationHave questions? Chat with us live at raleighusa.com or call us at , 8am 5pm PST
1 2 Have questions? Chat with us live at raleighusa.com or call us at 1-800-251-8435, 8am 5pm PST The bicycle you have purchased is a complex piece of equipment that must be properly assembled and maintained
More informationOWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved
OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory (ROOF) P/N 08L07-E09-100 Application 2013 CROSSTOUR Publications No. AII 13168 Issue Date NOV 2012 PARTS LIST 6 Washers Bicycle attachment 2 Brackets Hex wrench 4 Thumbwheel
More informationAssembly, Fitting, Care & Maintenance
Assembly, Fitting, Care & Maintenance Assembly 1.1 Remove All Parts and Tools from Packaging 1.2 Part and Tools required for assembly 1.3 Check Foot & Leg Assembly 1.4 Adjust Upper-Leg-Support (ULS) Height
More informationBABYSEAT II. Suspension Child Carrier
BABYSAT II Suspension Child Carrier User's Guide D FR S IT JP KR CHS User needs check whether there are any laws specific to the carrying of children in seats attached to cycles that apply in the country
More informationNEXT EXIT THE GREAT OUTDOORS POPULATION: EVERYONE
2017 NEXT EXIT THE GREAT OUTDOORS POPULATION: EVERYONE SportRack is proud to offer safe, quality products that allow you to take full advantage of your vehicle s carrying capacity. SportRack accessories
More informationDrive Belt Instructions
Drive Belt Safety Do not roll, pry, twist, invert or bend the belt back on itself. Do not zip tie the belt. The acceptable temperature range for your belt drive is -53 C to 85 C. Do not lubricate the belt
More informationGood tread, no splits, cracks or holes, properly inflated. True, no missing or broken spokes, good rim. Secure, facing in right direction
APPENDIX 1 Bike Check This is an M check. Start at the front of the bike and systematically work towards the back. Put a cross beside anything that is faulty. Note any faults you find. X FAULT Front tyre
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationCHAIN DRIVE PREMIUM INDOOR CYCLING BIKE SF-B1509C USER MANUAL
CHAIN DRIVE PREMIUM INDOOR CYCLING BIKE SF-B509C USER MANUAL WARNING! Your indoor cycling bike is not designed for reverse pedaling! Failure to comply with this warning may result in permanent damage to
More information600 / 600FC OWNER'S MANUAL
PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY
More informationCo-Motion Co-Pilot Bicycles for travel
Revised October 2014 Co-Motion Co-Pilot Bicycles for travel Packing and travel instructions Eugene Oregon USA Toll free 1-866-282-6336 www.co-motion.com Congratulations! A Co-Motion Co-Pilot is a great
More informationInspecting before riding
Inspecting before riding ) Squeeze both brake levers firmly. Do they move smoothly, yet their movement stops before they touch the handlebar grip? Do both wheels spin without wobbling or binding? Gently
More informationThule RideAlong Mini Front Child Bike Seat
Congratulations on your purchase of the Thule RideAlong Mini front child bike seat. This is a premium product with every detail carefully designed for high safety and easy use. We wish you and your child
More informationUSER MANUAL. you pedal, something amazing happens
TM USER MANUAL you pedal, something amazing happens THANK YOU! In our humble beginnings we ran a bike-powered smoothie booth at Northern California music festivals called The Juice Pedaler. We saw the
More informationQuattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1
Quattrocycle User Manual Last update February 2010 Quattrocycle BV Bremkant 6 5091 EJ Middelbeers User Manual Quattrocycle 1 Table of Contents Page Chapter 1: Introduction 3 Chapter 2: Instructions for
More informationGRAVITY BIKE RACK ASSEMBLY & OPERATING INSTRUCTIONS
GRAVITY BIKE RACK 94479 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011
More informationPage 1. Single Scull Car Rack Assembly and User s Manual " "
Page 1 Single Scull Car Rack Assembly and User s Manual Page 2 Items in the box: (2) V cradles (2) 4 rails (1) 1 3/4 X 18 rail coupler (4) 1/4-20 X 4 1/2 bolts (2) 1/4-20 X 2 1/2 bolts (12) 1/4 flat washers
More informationAPPENDIX F Rail Chocks Quick Reference Guide
COMMON CHOCK TYPES Manuf. Chock Description Railcar Type Profile Tie-Down Type Chocks per Vehicle Strap 1 Holden Grate Lock Bi-Level Standard Grating 4 No 2 Holden Low-Profile Grip Lock Bi-Level Low Grating
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationCANYON WORKSHOP: CORRECT PACKAGING FOR TRANSPORT
Whether you're travelling or sending your bike in for a service, the Canyon BikeGuard is sturdy and can be used several times. It is of course necessary that you retain all the packaging material delivered
More informationUsing Your Bike Friday : Folding Rear Rack
Using Your Bike Friday : Folding Rear Rack Green Gear Cycling, Inc. 3364 W. 11th Ave. Eugene, OR 97402 800-777-0258 USA & Canada +1-541-687-0487 Int l +1-541-687-0403 Fax www.bikefriday.com info@bikefriday.com
More information1. General Safety Information. Silvio V2.2 Assembly Instructions Assembly. Adjust to the rider.
Silvio V. Assembly Instructions support@cruzbike.com. General Safety Information WARNING to avoid serious injuries:. If you are unsure about fitting, testing and adjusting brakes or gearing on a bicycle,
More information200 STRINGING MACHINE
200 STRINGING MACHINE OWNER S MANUAL Issue 1 - July 2010 Provided by www.gssalliance.com 200 OWNER S MANUAL TABLE OF CONTENTS WARRANTY...PAGE 2 FEATURES...PAGE 3 ASSEMBLY INSTRUCTIONS...PAGE 4 MOUNTING
More informationRudder Kit Assembly Instructions for Quest 13
Rudder Kit Assembly Instructions for Quest 13 Revised 4/2/2015 78501 Rudder System The Hobie Quest is designed for the addition of an optional rudder system. Rudder systems in boats like this allow you
More informationDuo/Trio Office Bike Owner s Manual
Duo/Trio Office Bike Owner s Manual Welcome Congratulations on choosing to enhance your productivity and wellness with LifeSpan. You ve made a healthy decision, as the need for increased amounts of daily
More informationAssembly Instructions And User Guide
EZ-1/EZ-CLASSIC QUADRIBENT By Blackbird Designs Inc. Mark 5.2 June 2011 Assembly Instructions And User Guide 1 The Quadribent is 2-seat, side-by-side, human powered vehicle that enables almost anyone to
More informationBELT DRIVE PREMIUM INDOOR CYCLING BIKE SF-B1509 USER MANUAL
BELT DRIVE PREMIUM INDOOR CYCLING BIKE SF-B1509 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please
More informationFit Testing. C50 APR New Equipment Training Module March 2010 Rev01
Fit Testing Once all three steps are complete, the mask must be fit tested. This is done using the TSI Portacount Test System Before either of the tests begin, the mask must be set up properly. Fit and
More information