NanoMQS Interconnectors for the Automotive Industry

Transcription

1 NanoMQS Interconnectors for the Automotive Industry

2 TE AUTOMOTIVE THE 5 AUTOMOTIVE

3 APPLICATION AREAS + E-BIKE APPLICATION

4 II

5 III

6 AT YOUR SERVICE TE Automotive Online The TE Automotive website is an innovative and interactive source for application information, product updates and technical solutions. Please contact us at: Internet Electronic Internet Catalog IV

7 AT YOUR SERVICE Product and Machine Literature TE Automotive offers a variety of product specific catalogs, brochures and high impact flyers to help better serve you! For more information on literature for TE Automotive, please contact your local organization or go to Product Information Center (PIC) You can rely on TE Connectivity s PIC Team to provide you support for answers to your general information or technical questions in an efficient and effective manner. To reach our PIC staff, please contact your local organization or see our Global Contacts page. Please contact us at: V

8 NanoMQS Interconnectors Quality Guidelines VI

9 NanoMQS Interconnectors Quality Guidelines VII

10 NanoMQS Interconnectors IP Code (Elements and Significance acc. to IEC and DIN 40050) VIII

11 NanoMQS Interconnectors IP Code (Elements and Significance acc. to IEC and DIN 40050) IX

12 NanoMQS Interconnectors Restriction on the Use of Hazardous Substances (RoHS) X

13 NanoMQS Interconnectors AWG Conversion Table (Average Value) XI

14 NanoMQS Interconnectors Conversion Table Inch/mm XII

15 NanoMQS Interconnectors Conversion Table Inch/mm (continued) XIII

16 TE AUTOMOTIVE Nano Micro Quadlok Interconnectors Introduction 10 NanoMQS Terminal 20 Page NanoMQS Top Latch Unsealed Introduction 3 Printed Circuit Board Headers 8 Positions Right Angle 4 12 Positions Right Angle 5 20 Positions Right Angle 6 32 Positions Right Angle 7 8 Positions Vertical 8 12 Positions Vertical 9 20 Positions Vertical Positions Vertical 11 Receptacle s 8 Positions Positions Positions Positions 15 NanoMQS Sealed s Receptacle s 2 Positions 16 4 Positions Positions 18 6 Positions 19 Application Tooling XIV

17 THE PRODUCTS XV

18 NanoMQS Interconnectors Engineering Notes XIV

19 NanoMQS Interconnectors Introduction NanoMQS New Generation Contacts To address the growing require - ments of the automotive indus - try in relation to the optimiza - tion of the space envelopes for control units and assemblies, TE Connectivity has developed the NanoMQS contact product family. The base element is a female contact suitable for a contact blade cross-section of 0.5 x 0.4 mm. The NanoMQS contact expands the family of MQS contacts already proven in the automotive industry and makes it possible to reduce spatial volume up to 50%. As such, compared to systems with a nominal size of 0.63, significant space and weight savings are possible. The NanoMQS contact features very good current carrying capability at high ambient temperatures. On the other hand the insertion and extraction forces are very low and avoid mechanical aids for the actuation of connection systems with up to 40 contact positions. As a result further space savings are possible compar ed to other systems. Of course the contact system and the connectors have been de signed in strict compliance with the design and function guidelines published by major car manufacturers. All NanoMQS applications are therefore extremely robust. Despite the small size, it was possible to integrate the internationally required elements for the catch mechanism (primary lock) and catch lock (secondary locking); these features also comply with the force requirements in the underlying automotive specifications. In accordance with the design philosophy for the MQS system, the NanoMQS contact can also be arranged in a grid as an integer multiple of all contacts in the series. All con tacts can be realized in mixed arrangements almost without limitation, as the position of the catch lock also follows the platform standard for the MQS family. 1

20 NanoMQS Interconnectors NanoMQS Terminal Receptacle Contacts Technical Features Contact Material: CuNiSi/CuSn Surface Contact Area: Tin plated: µm Sn Silver plated: µm Ag Wire Size Range: mm Current Carrying Capacity: Up to 3 A at 90 C Temperature Range: 40 C C (tin plated) 40 C C (silver plated) Cycles: 20 tin plated 50 silver plated Application Specification: Product Specification: Receptacle Contacts Wire Size Range (mm 2 ) Insulation Diameter (mm) Material and Finish Part Numbers Strip Package Loose- Package Hand Tool Form Quantity Piece Quantity Applicator with Die Set max 1.2 CuNiSi, silver plated CuSn, tin plated max 1.4 CuNiSi, silver plated CuSn, tin plated See Application Specification

21 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Introduction The NanoMQS TL series features a high possible connector robustness, a multitude of possibilities in mechanical integration and manufacturability. Available in 4 to 40 connections and the ease of combination of several modules support a wide range coverage of applications. Smooth extraction and insertion along with convenient handling show that the miniaturization of connector systems does not necessarily signify loss of convenience. The development of the system was targeted to meet the same requirements as nonminiaturized ones: Current carrying capability at high ambient temperatures, reliable operation, robust protection against incorrect insertion and acoustic feedback on insertion. The ability to integrate multipin connectors in all types of enclosures as well as the possibility of orientating the connectors perpendicular and parallel to the circuit board make the TL series a real all-rounder. By selecting high quality housing materials of course resistant to high temperatures and suitable for reflow processes and due to a ultra robust housing design, the connector system can stand critical loads and installation. multipin is made for reliable and precise soldering processes using grippers or suction cups, effortlessly being integrated into fully automatic processes. Flexibility in the common connection types, thru hole, press-fit supports the individual requirements of the system integrator. The female connector housings have been developed to meet both manual contact loading as well as fully automated block loading, and does therefore as well support the different customer preferences. Product Features Miniaturized terminal system for high density connectors Signal terminal max. 3 Amps Pin dimensions 0.5 mm x 0.4 mm Nominal pitch 1.5 mm Wire size range max mm2 Integrated into the MQS terminal family series Single piece locking lance terminal Primary and secondary locking capability Designed for automotive applications The Connector housing with its multifunction surfaces on the 3

22 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers Technical Features No. of Positions: 8 Positions Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Right Angle Cover Lever Retainer s Mating Receptacle s 8 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 12 4

23 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 12 Positions Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Right Angle Cover Lever Retainer s Mating Receptacle s 12 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 13 5

24 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 20 Positions 1.5 Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni 12.2 Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Right Angle Cover Lever Retainer s Mating Receptacle s 20 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 14 6

25 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 32 Positions Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Right Angle Cover Lever Retainer s Mating Receptacle s 32 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 15 7

26 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 8 Positions 2.35 Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni 16.2 Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Vertical Cover Lever Retainer s Mating Receptacle s 8 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 12 8

27 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 12 Positions 2.35 Material: LCP, Glas fibre reinforced Material and Finish: CuMg01, Sn over Ni 16.2 Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Vertical Cover Lever Retainer s Mating Receptacle s 12 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 13 9

28 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 20 Positions Material: LCP, Glas fibre reinforced 2.35 Material and Finish: CuMg01, Sn over Ni Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Vertical Cover Lever Retainer s Mating Receptacle s 20 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 14 10

29 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Printed Circuit Board Headers (continued) Technical Features No. of Positions: 32 Positions Material: LCP-GF30 / LCP-GF Material and Finish: CuMg01, Sn over NiMating Product Specification: Application Specification: Printed Circuit Board Headers Part Numbers No. of Positions Keying Options Color PCB Header Vertical Cover Lever Retainer s Mating Receptacle s 32 pos. Coding A Black N/A N/A N/A pos. Coding B Black N/A N/A N/A pos. Coding C Black N/A N/A N/A pos. Coding D Black N/A N/A N/A Mating Receptacle See Page 15 11

30 NanoMQS Micro Interconnectors Quadlok Interconnection System Micro NanoMQS Power Top Quadlok Latch Unsealed Contacts Receptacle s Technical Features No. of Positions: 8 Positions Material: PBT Glas fibre reinforced 13.1 Wire Size Range: mm 2 Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 8 pos. Coding A Black N/A N/A N/A N/A pos. Coding B Black N/A N/A N/A N/A pos. Coding C Black N/A N/A N/A N/A pos. Coding D Black N/A N/A N/A N/A Mating Receptacle Right Angle See Page 4 Mating Receptacle Vertical See Page 8 12

31 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Receptacle s (continued) Technical Features No. of Positions: 12 Positions Material: PBT Glas fibre reinforced 16.7 Wire Size Range: mm 2 Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 12 pos. Coding A Black N/A N/A N/A N/A pos. Coding B Black N/A N/A N/A N/A pos. Coding C Black N/A N/A N/A N/A pos. Coding D Black N/A N/A N/A N/A Mating Receptacle Right Angle See Page 5 Mating Receptacle Vertical See Page 9 13

32 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Receptacle s (continued) Technical Features No. of Positions: 20 Positions Material: PBT Glas fibre reinforced 23.9 Material and Finish: CuMg01, Sn over NiMating Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 20 pos. Coding A Black N/A N/A N/A N/A pos. Coding B Black N/A N/A N/A N/A pos. Coding C Black N/A N/A N/A N/A pos. Coding D Black N/A N/A N/A N/A Mating Receptacle Right Angle See Page 6 Mating Receptacle Vertical See Page 10 14

33 NanoMQS Interconnectors NanoMQS Top Latch Unsealed Receptacle s (continued) Technical Features No. of Positions: 32 Positions Material: PBT Glas fibre reinforced Material and Finish: CuMg01, Sn over NiMating Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 32 pos. Coding A Black N/A N/A N/A N/A pos. Coding B Black N/A N/A N/A N/A pos. Coding C Black N/A N/A N/A N/A pos. Coding D Black N/A N/A N/A N/A Mating Receptacle Right Angle See Page 7 Mating Receptacle Vertical See Page 11 15

34 NanoMQS Interconnectors NanoMQS Sealed s Receptacle s Technical Features No. of Positions: 2 Positions Material: PBT Glas fibre reinforced Wire Size Range: mm 2 Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 2 pos. Coding A Black N/A N/A N/A pos. Coding B Grey N/A N/A N/A pos. Coding C Blue N/A N/A N/A

35 NanoMQS Interconnectors NanoMQS Sealed s Receptacle s (continued) Technical Features No. of Positions: 4 Positions Material: PBT Glas fibre reinforced Wire Size Range: mm 2 Product Specification: Application Specification: Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 4 pos. Coding A Black N/A N/A N/A

36 NanoMQS Interconnectors NanoMQS Sealed s Receptacle s (continued) Technical Features No. of Positions: 2 6 Positions 9.8 Material: PBT Glas fibre reinforced Wire Size Range: mm 2 Product Specification: Application Specification: x Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 6 pos. Coding A Black N/A N/A N/A 6 pos. Coding B Grey N/A N/A N/A 5 pos. Coding A Black N/A N/A N/A 5 pos. Coding B Grey N/A N/A N/A 4 pos. Coding A Black N/A N/A N/A 4 pos. Coding B Grey N/A N/A N/A 3 pos. Coding A Black N/A N/A N/A 3 pos. Coding B Grey N/A N/A N/A 2 pos. Coding A Black N/A N/A N/A 2 pos. Coding B Grey N/A N/A N/A 18

37 NanoMQS Interconnectors NanoMQS Sealed s Receptacle s (continued) Technical Features No. of Positions: 6 Positions Material: PBT Glas fibre reinforced Wire Size Range: mm Product Specification: Application Specification: x 1.8 Receptacle s Part Numbers No. of Positions Keying Options Color Receptacle Cover Locking Device Cover and Lever Mating Tab Mating PCB Headers Right Angle Vertical 6 pos. Coding A Black N/A N/A N/A 6 pos. Coding B Grey N/A N/A N/A 19

38 NanoMQS Interconnectors Engineering Notes 20

39 NanoMQS Interconnection Interconnectors System Application s and Tooling Connectors Introduction Miniaturization of the connectors place higher demand both on the processing machines and tools as well as the machine operator. The hand tool, crimp tool, and fully auto - matic machine manufacturers have addressed the issue of processing small wire sizes by equipping the machines with tailored components to ensure reliable and secure processing. A range of processing tools are available to produce crimp connections. To process crimp contacts both hand tools and applicators with pneumatic feed or motorized contact feed can be used. For automatic processing the quality of the crimp connection can be recorded with standard commercial crimp monitoring systems, modified to accommodate the small cross section. Processing tools and small wire size processing machines include: Hand Tools Ocean Applicators Fully-automatic processing machines, equipped with a special assembly set for small wire sizes Fully-automatic machine with wire batch station or automatic housing loading. 21

40 NanoMQS Interconnectors Application Tooling Application Tooling for Processing Small Wire Sizes Application Tooling for Processing Small Wire Sizes A range of application tooling solutions is available to embrace the current trend in the automotive industry towards using wires with increasingly smaller cross sections. Thinner stranded wires require crimp connections with smaller contacts such as the NanoMQS, MQS and other contact systems that allow stranded wires to be processed up to a minimum of 0.13 mm 2 cross section. The Komax Alpha 355 lead maker can be equipped with special application tooling kits and applicators for small wire sizes. For more detailed information please visit our websites:

41 NanoMQS Interconnectors Application Tooling Automatic Processing Machine Alpha 433 H Fully Automatic Crimping Machine The Alpha 433 lead maker is a flexible fully automatic crimping machine for efficient wire processing. Large wires no longer pose a problem. The machine is capable of processing large wires from mm 2 / AWG 24-6 (finewire conductors). The P104 crimp ing press delivers the requisite force to process large terminals. Terminals can be crimped on both ends but seals can also be loaded at one end. Wire processing to the most exacting standards great versatility with out conversion. The Alpha 433 fully automatic crimping machine is based on state of the art technology and is designed for processing single conductors as well as double crimp connections. n High flexibility with up to five processing stations n Short conversion times n Maximum ease of operation thanks to TopWin user software n Networkable with WPCS interface n Modern quality monitoring n Belt drive for high processing speed n Extensive range of accessories For more detailed information please visit our websites:

42 NanoMQS Interconnectors Application Tooling Applicators Applicators TE Application Tooling (AT) offers a broad range of applicator types that cover most of the terminals sold on the market worldwide. Starting from the well known HD-I applicators until the brand new applicator series with interchangeable feed options AT offers a flexible and excellently supported tool concept for crimping of terminals to wires. Ocean Applicator Series Crimping standards continue to rise to higher levels of quality and repeatability. Taking customer input and market demands into consideration, TE Application Tooling has created the Ocean applicator series to meet those higher demands and to take terminal crimping to a new level. By consolidating our applicator offering, TE can provide design consistency and tooling standardization to the market. One of the resulting benefits to customers of this consolidation is flexibility in the choice of feeding options: new and improved mechanical and pneumatic feeds along with the innovative and precise servo feed option. The Ocean applicator series design also allows customers to perform field upgrades to system III technology. It provides an upgrade path for terminal intelligence that allows the machine to obtain set-up features as the applicator is upgraded. n One applicator platform modular family design n Two ram interface styles n Three interchangeable feed options: Mechanical Pneumatic Servo For more detailed information please visit our websites:

43 NanoMQS Interconnectors Application Tooling Applicators Applicator Wear and Spare Parts To ensure the support of our installed applicator base, TE Application Tooling established a stocking programme for wear parts. Subsequently, all crimpers and anvils for your applicator are normally available ex stock, ensuring the shortest possible lead times. Wear Tooling to Apply Stainless Steel Contacts The application of nickel plated stainless steel terminals has always been a challange with regard to the uptime of the crimp tooling. TE Application Tooling developed crimpers and anvils, using special base materials and surface treatments in the crimp area. These have enabled us to significantly increase the tool life and thus reduce the applied cost of these products. If you are experiencing specific wear problems in your production, please contact your regional TE Connectivity representative. For more detailed information please visit our websites:

44 NanoMQS Interconnectors Application Tooling Smart Applicator / Hand Tool Smart Applicator Now it is possible to have smart applicators in any of the feed styles of the Ocean applicator series. The system III applicator data is now extended to an entire smart applicator strategy. It allows the operator to conveniently view all the data about the applicator. The data contains serial numbers, part numbers, wearable tooling part numbers (and tooling cycle counters), strip length, instruction sheet numbers and more. This data includes the terminals, with acceptable crimp heights, that can be terminated with the applicator. With this information conveniently available to the operator, programming and verifying the crimp application has never been easier. Setup will be less time consuming and more accurate. This system also extends the availability of the high precision servo feeder technology recently developed by TE Application Tooling. n Smart applicator data module stores complete information about the applicator. n Feeder automatically reads terminal information from the applicator data chip. CS11K NanoMQS Hand Tool This hand tool can be used to proceed the current interconnection systems NanoMQS, MQS, and others with wire sizes from mm 2. Terminating such small wires via crimping requires appropriate tools to ensure that the wire is terminated with the same level of quality that is generally expected of a crimp connection and this applies to automatic termination and hand-operation processes likewise. Only precision application tools deliver the essential air-tight crimping connection without potentially damaging the fine wires. Using this tool ensures that manual work on the vehicle cabling during repair work or low-volume production for instance is done on the quality level of fully automated large scale original equipment manufacturing. On top of these generally high quality standards the new crimp tools was also tuned to offer excellent ergonomics. To achieve this, the tool was designed as compact as possible, keeping in mind that it needs to be handy for areas with limited handling space. Among the many advantages are: n Six crimp nests in a single tool head n Exchangeable crimp die head n Slideable crimp die ensures application of force in a straight line (no tilting of the dies) n Locator for proper contact positioning n Wire stop n Proven and durable tool body 26

45 NanoMQS Interconnectors Application Tooling TE Application Tooling Contacts EMEA Europe, Middle East, Africa and India Austria Phone: Belarus - Russia - Ukraine Phone: gatd.ru@te.com Belgium - Netherlands - Luxemburg Phone: gatd.nl@te.com Bulgaria - Hungary - Latvia Lithuania - Poland - Romania Phone: gatd.pl@te.com Czech - Slovakia Phone: gatd.cz@te.com Denmark - Norway - Sweden Phone: gatd.se@te.com Egypt - Ireland - United Kingdom Phone: gatd.gb@te.com Finland and Estonia Phone gatd.se@te.com France - Morocco - Tunisia Phone: gatd.fr@te.com Germany - Slovenia Phone: gatd.de@te.com India - Middle East Phone: gatd.in@te.com Italy - Greece Phone: gatd.it@te.com Spain - Portugal Phone: gatd.sp@te.com Switzerland Phone: gatd.ch@te.com Turkey Phone: e.davasli@te.com Product Information Center France Phone: Fax: Pic.france@te.com Product Information Center Germany Phone: +49 (0) Fax. +49 (0) germany-pic@te.com Product Information Center Netherlands Phone: Fax: picbenelux@te.com Product Information Center Poland Phone: Fax: jmatasz@te.com Product Information Center Spain Phone: Fax: pic.spain@te.com AMERICAS USA Harrisburg, PA Tool Sales Phone: toolingsales@te.com Technical Assistance Phone: Phone: Canada Rick Grawehr Phone: richard.grawehr@te.com Brazil Mauricio Oliveira Phone: maolivei@te.com Mexico Mexico City Tooling Assistance Center Phone: ASIA / PACIFIC China Beijing Phone: Fax: Changchun Phone Fax Hong Kong Phone: Fax: Shanghai Phone: Fax: Shenzhen Phone Fax Taipei Phone Fax Wuhan Phone Fax Others Australia Phone: Fax: Japan Phone: Fax: Korea Phone: Fax: Malaysia Phone Fax Singapore Phone: Fax: Thailand Phone Fax Disclaimer: While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 27

46 NanoMQS Interconnectors Application Tooling Engineering Notes 28

47

48 Tyco Electronics AMP GmbH a TE Connectivity Ltd. company AMPèrestr Bensheim / Germany Phone: +49-(0) Fax: +49-(0) TE Connectivity, TE connectivity (logo), AMP+, NanoMQS, and MQS are trademarks. Alpha is a trademark of Komax Group. Tyco Electronics AMP GmbH certified acc. ISO and ISO/TS 16949: Tyco Electronics AMP GmbH Issued M ST