FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE
|
|
|
- Roger Charles
- 5 years ago
- Views:
Transcription
1 FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE Fire Rating 5-Ply Wood HPDL Do Only Do w/ Transom P09 9P09 over up to over up to 5P09 9P09 5P09 9P P08 8 8P over up to 5P08 8P08 5P08 8P Ma. Size Std. Pair 3-4- Ma. Size DE Pair 3-4- N/A N/A N/A N/A, 3-,, 3-,, 3-,, 3-, Ma. Transom Maimum Lite 2 Maimum Louver 3 (fusible link) Size W L Sq. W L Sq. Hinges Pivots N/A N/A N/A N/A N/A N/A, 3-,, 3-, N/A N/A Locks (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead Fire Eit Devices 4 Closers Viewer 2 per do ma. Flush Bolts Auto Do Bottoms 1" Dia. N/A d, Semimtised 1" Dia. N/A d, Semimtised 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. d, Semimtised d, Semimtised d, Semimtised d, Semimtised 1" Dia. N/A d, Semimtised 1" Dia. Listed 24" ma. d, Semimtised 1" Dia. N/A d, Semimtised Kick Plates Ma. Ma. Ma. Ma. Ma. Ma. Ma. Ma. Ma.
2 Lead Lined Lead Lined P P07 over up to 5P07 7P07 5P07 7P P15 1P15 N/A N/A, 3-,, 3-, N/A N/A N/A N/A N/A N/A 16" 16" 256 N/A N/A N/A Per N/A N/A N/A 16" 16" 256 N/A N/A N/A Per (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead 1" Dia. N/A d, Semimtised 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. d, Semimtised d, Semimtised d, Semimtised d, Semimtised Ma. Ma. Ma. Ma. Ma. 1 Requires fied bar between do and transom. 2 Larger lite sizes may be available using special glass frame. 3 Louvers are not available in 20-minute dos per. 4 5 legged metal channels required with CVR.
3 How to Specify Categy A Installations "Where UBC requirements f positive pressure must be met, dos shall include all requirements as part of the do construction per Categy A guidelines as published by ITS/Warnock Hersey. No intumescent is allowed on the frame. Only smoke gasketing applied around the perimeter of the frame to meet the S rating is permissible. POSITIVE PRESSURE FIRE DOOR INSTALLATION INSTRUCTIONS F Dos That Have Been Labeled in Compliance with UBC VT positive pressure fire dos are constructed to meet Intertek/Warnock Hersey Categy A guidelines, allowing dos to be hung without any surfaceapplied intumescent. Our positive pressure fire dos arrive ready-to-hang, just like all other VT dos. The VT label is your assurance f one-step installation. 1. In der to meet the smoke requirement, a smoke seal, listed and labeled f UBC Parts 1 and 2 positive pressure installations, must be mounted around the perimeter of the frame. 2. Astragal sets, metal edges, edge guards taller than 40 AFF require surface-applied intumescent furnished and installed by others. Refer to manufacturer s instructions f intumescent application. Edge guards installed below 40 AFF and 5 metal channels do not require surfaceapplied intumescent. Flat bar astragals (FBAs) are allowed on pairs of dos with fire ratings up to 90-minute with no additional intumescent required. 3. Light Kit [Where applicable] install a lite kit listed and labeled f UBC positive pressure applications to meet the appropriate fire rating. (See fire label located on do f fire rating.) Follow lite kit manufacturer s instructions f proper installation. 4. Dos must be installed in fire-rated frames. Standard 3-sided steel frames (minimum 16-gauge) do not require special fire testing f positive pressure. s must be installed plumb, square and level. 5. Hardware Dos have been facty-prepared to receive hardware as indicated by the hardware supplier s schedule. Hardware may be required to be listed and labeled in accdance with UBC and UL 10C-1998 f use in positive pressure fire-rated wood dos if located above 40" AFF. Anything below 40" AFF can follow eisting standards. 6. Clearances The clearances between the do edge and frame must be at least 1/16 inch and no greater than 1/8 inch at the head and jambs. See, latest edition, f clearance under bottom of dos. Rev 06/07
4 FIRE DOOR CAPABILITY CHART 45-, 60- and 90-MINUTE POSITIVE PRESSURE Fire Rating 45-, 60-, 90- Minute Mineral 60-Minute 60-Minute Mineral Mineral 5-Ply Wood HPDL Do Only Do w/ Transom 1 5P11 1P11 5P09 9P P45 1P45 5P09 9P09 5P45 1P45 5P08 8P Ma. Size Std. Pair 2-, 3-4- Ma. Size DE Pair 2-, 3-4- Ma. Transom Maimum Lite 2,6 Maimum Louver 3 (fusible link) Size W L Sq. W L Sq. Hinges Pivots 10" 33" " 24" 576 Per N/A N/A N/A N/A N/A N/A N/A N/A Per N/A N/A N/A N/A 10" 33" " 24" 576 Per N/A N/A N/A , N/A N/A N/A Per N/A 36" 54" " 24" 576 Per N/A N/A N/A N/A 24" 36" " 24" 576 Per Locks (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead (ma. 5" Dead Fire Eit Devices Closers Viewer 2 per do ma. Flush Bolts 1" Dia. Listed 24" ma. Auto Do Bottoms d, Semimtised 1" Dia. N/A d, Semimtised 1" Dia. N/A d, Semimtised 1" Dia. Listed 24" ma. 1" Dia. Listed 24" ma. d, Semimtised d, Semimtised 1" Dia. N/A d, Semimtised Kick Plates Ma. Ma. Ma. Ma. Ma. Ma. 1 Requires fied bar between do and transom. 2 Larger lite sizes may be available using special glass frame. 3 Louvers are not available in 20-minute dos per. 4 Requires metal vision panel. 5 Cut out lined with intumescent. 6 FT1FP mouldings square inch lite maimum.
5 How to Specify Categy A Installations "Where UBC requirements f positive pressure must be met, dos shall include all requirements as part of the do construction per Categy A guidelines as published by ITS/Warnock Hersey. No intumescent is allowed on the frame. Only smoke gasketing applied around the perimeter of the frame to meet the S rating is permissible. POSITIVE PRESSURE FIRE DOOR INSTALLATION INSTRUCTIONS F Dos That Have Been Labeled in Compliance with UBC VT positive pressure fire dos are constructed to meet Intertek/Warnock Hersey Categy A guidelines, allowing dos to be hung without any surfaceapplied intumescent. Our positive pressure fire dos arrive ready-to-hang, just like all other VT dos. The VT label is your assurance f one-step installation. 1. In der to meet the smoke requirement, a smoke seal, listed and labeled f UBC Parts 1 and 2 positive pressure installations, must be mounted around the perimeter of the frame. 2. Astragal sets, metal edges, edge guards taller than 40 AFF require surface-applied intumescent furnished and installed by others. Refer to manufacturer s instructions f intumescent application. Edge guards installed below 40 AFF and 5 metal channels do not require surfaceapplied intumescent. Flat bar astragals (FBAs) are allowed on pairs of dos with fire ratings up to 90-minute with no additional intumescent required. 3. Light Kit [Where applicable] install a lite kit listed and labeled f UBC positive pressure applications to meet the appropriate fire rating. (See fire label located on do f fire rating.) Follow lite kit manufacturer s instructions f proper installation. 4. Dos must be installed in fire-rated frames. Standard 3-sided steel frames (minimum 16-gauge) do not require special fire testing f positive pressure. s must be installed plumb, square and level. 5. Hardware Dos have been facty-prepared to receive hardware as indicated by the hardware supplier s schedule. Hardware may be required to be listed and labeled in accdance with UBC and UL 10C-1998 f use in positive pressure fire-rated wood dos if located above 40" AFF. Anything below 40" AFF can follow eisting standards. 6. Clearances The clearances between the do edge and frame must be at least 1/16 inch and no greater than 1/8 inch at the head and jambs. See, latest edition, f clearance under bottom of dos. Rev 07/08
MACHINING OF VT FIRE RATED DOORS BY OTHERS
MACHINING OF VT FIRE RATED DOORS BY OTHERS In der f another company to machine VT fire rated dos, the company must write a letter to VT requesting to become a licensed machiner of fire rated dos manufactured
Beauty-Line Windows (1957 to 1979)
Beauty-Line Windows (1957 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
Opening and closing force guidelines
Opening and closing force guidelines This document has been complied under guidance of ASDMA membership to provide information on the requirements of Part M of the Building regulations with regards to
HARDWARE. Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessories... A4...
front line Table of Contents A4 1 HARDWARE Section Page Push / Pulls... A4... 2 Pivots... A4... 3 Hinges, Locks and Cylinders... A4... 4 Handles, Locks and Accessies... A4... 5 Exit Devices... A4... 6
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Non-Refrigerated Fountains OVL-EBP OVL-SBP OVL-SEBP OVL-ESBP Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE ITRUCTIO BEFORE STARTING
P STYLE 6 LH 5 RH 4 LRH
42" [1067] HARDWARE FOR 3/8"- 1.9 1.8 1.5 1.2 STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 84" RECOMENDED MAX HEIGHT 1/2" (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT OPP. 1.9 3
NOR-LAKE, INCORPORATED 727 Second Street Hudson, Wisconsin 54016
NOR-LAKE, INCORPORATED 727 Second Street Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-6149 FAX www.norlake.com Kold Locker Walk-ins Standard Model Coolers
CRL COMMERCIAL PATCH HARDWARE WEDGE LOCK STYLE FOR 5/8"-3/4" GLASS TYPICAL HURCULITE WEDGE-LOCK GLASS DOOR ELEVATIONS P STYLE
42" [1067] HARDWARE FOR 5/8"- 1.5 1.9 1.8 1.2 OPP. 1.9 3 1/2" [88] 24 7/8" [632] DLO 1 11/16" [42] 84" [2134] 114" [2896] STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 5/8" (15mm) TEMPERED = 84" RECOMENDED
ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
P STYLE 6 LH 5 RH 4 LRH
8 42" 1.11 1.8 1.5 1.2 OPP. 1.11 3 SIDELITE OPENING 3 SIDELITE OPENING TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS 1.7 1.9 1.1 1.2 14 1.9 1.7 OPP. 8 3 24 7/8" DLO 1 11/1 8 11 1.7 1.7 OPP. 1.9 1.3 1.4
CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
5023 HAZEL JONES ROAD, BOSSIER CITY, LA 71111 888.315.1561 800.877.8746 FAX SALES@GORDONCLEANROOM.COM GORDONCLEANROOM.COM AN EMPLOYEE OWNED COMPANY CLEANROOM GEL GRID CEILING SYSTEM PRODUCT DATA Division
CERTIFICATE OF APPROVAL No CF 877 ZOO HARDWARE LIMITED
CERTIFICATE OF APPROVAL No CF 877 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Unit B, Dukes Drive,
Kestrel Aluminium Systems Limited. Product Manual Section 10 Thermal Framing System. Manual Version
Kestrel luminium Systems Limited Product Manual Section 10 Manual Version 23.0.1 Kestrel luminium Systems Section 10.01 Product Specification 10.01.01 sheet 1 Product specification 10.01.01 sheet 2 Product
T Y P E V S A B M S E W A G E P U M P
Pe r fo r m a n ce C h a r t s 11 1 D R Y P I T S B U L L E T I N 2 3 9 8 7 6 5 4 3 2 1 12 11 1 / 4 1 1 / 2 9 3 / 4 9 5% 3 HP 5 HP 7 1/2 HP 1 HP 76% 5% C u r v e P a g e V S A B M - 4 1 1 5 R P M M O D
AAMA/WDMA/CSA 101/I.S.2/A AAMA/WDMA/CSA 101/I.S.2/A STRUCTURAL PERFORMANCE TEST REPORT SUMMARY RENDERED TO:
AAMA/WDMA/CSA 101/I.S.2/A440-05 AAMA/WDMA/CSA 101/I.S.2/A440-08 STRUCTURAL PERFORMANCE TEST REPORT SUMMARY RENDERED TO: ALL SEASONS DOOR & WINDOW, INC. 28 EDGE ROAD EAST BRUNSWICK, NJ 08816 MODEL/ A-200
SECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.
SECTION 10185 SHOWER AND BATH ENCLOSURES Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bathtub wall enclosures. B. Shower wall
P STYLE 6 LH 5 RH 4 LRH
8 4 1.5 TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 8 RECOMENDED MAX HEIGHT 1/ (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT (15mm) TEMPERED
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Reel Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag plates
Standard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT
NOR-LAKE, INCORPORATED 800-955-5253 727 Second Street 715-386-2323 P.O. Box 248 866-961-5253 Parts Hudson, Wisconsin 54016 800-388-5253 Service 715-386-4290 FAX www.norlake.com Kold locker WalK-Ins Standard
NO LAKE. Standard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT
NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 dinecompany.com 800-955-5253 715-386-2323 800-388-5253 Parts 715-386-4291 FAX www.norlake.com NO LAKE KOLD LOCKER WALK-INS
Installation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD
Installation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD EDFP217C EDFP217RAC Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Wall Mount Steel Refrigerated Fountains INSTALLER These series fountains are among the easiest to install Fountains on the market today. To assure you install these models easily
General Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
B Upper Guide & Carbide Block. B Filler Block (Nylon) B004131S. Blade Cleaner. (Steel)
REPLACEMENT PARTS FOR BIRO MAINTENANCE/REPAIR KIT Models 11, 22, 33, 1433, 1433FH, 3334, 3334FH BRK2...Biro Repair Kit 1............ Upper Guide & Carbide Block 1.......... 3............... s 2.......
Tower Accessories & Hardware
Safety-Climb Cable System for Climbing Ladder These Safety-Climb Cable products clamp to climbing ladder rungs up to 1-1/4" (32 mm) in diameter. The products meet or exceed OSH requirements for climbing
Banyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL
SECTION 10801 - TOILET AND BATH ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions apply to this Section.
SHMS. Downstream Beamline. Large SHMS/HMS Angles (Config-1) Large SHMS / Min HMS Angle (Config-2) Dan Young Ext /26/2015 1
SHMS Dan Young Ext 5255 Downstream Beamline Large SHMS/HMS Angles (Config-1) Large SHMS / Min HMS Angle (Config-2) 1/26/2015 1 10 14.5 SHMS Beam Line Large SHMS/HMS Angles (Configuration-1) SHMS minimum
FEATURES. Welded Sash and Main Frame. Swiggle or DuraSeal Spacer System on Fixed Units. 3-1/4" Frame Depth. True Sloped Sill. Integral J Channel
FEATURES Welded Sash and Main Frame 7/8" Intercept Insulated Glass with Optional Grids; Low-E, Tempered, Obscure, and Argon Gas Available Swiggle or DuraSeal Spacer System on Fixed Units Integral Nailing
PNEUMATIC CONNECTORS SELECTION
PNEUMATIC CONNECTORS SELECTION Basic Model Diameter Inches (mm) Round Pneumatic Selection Chart No. of Tubes on Tubulation Diameter Inches (mm) Page Rating (psi)* 19 M & F. 460 (11.7) 19.040 (1.02) 8 100
Invacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008
INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008 0376/448/00 ISSUE 01 EMERGENCY PUSH PAD PULLMAN BOLT DEVICE TO EN 179 : 2008 1000mm MAXIMUM CLEAR OPENING HEIGHT WITH PUSH
TYPE 3710 CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring/ Retaining Ring C Mating Ring/ Clamp Ring D Mating Ring Adapter E Primary Ring F Primary Ring/ Retaining Ring G Finger Springs H Spring Retainer I Gland O-ring J Flat Gasket
NOR-LAKE, INCORPORATED 727 Second Street Hudson, Wisconsin 54016
NOR-LAKE, INCORPORATED 727 Second Street Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-6149 FAX www.norlake.com Kold Locker Walk-ins Standard Model Coolers
ADA COMPLIANCE CHECKLIST (RESTAURANT) Meet Fail N/A. Parking Lot
ADA COMPLIANCE CHECKLIST (RESTAURANT) Parking Lot Tow away warning at entrance to lot Accessible spaces - minimum 1, and at least 1 for each 25 spaces (e.g., 26 spaces requires 2 accessible spaces) Accessible
A F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD If the doorset design is required to provide for a smoke control function to comply with Building Regulations, in the absence of a suitable pressurisation system, the doorset
GP100 SERIES ENDURANCE PLAYGROUND SYSTEMS. Installation and Assembly Instructions. Gared Holdings, LLC 9200 E. 146th St. Noblesville, IN 46060
GP100 SERIES 1 OF 16 401754712 B Table of Contents Section Page No. Introduction 2 Cautions and Warnings 3 Parts Checklist 4 Post & Extension Arm Installation 7 Acrylic, Glass, and Perforated Steel Backboard
F13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F13.11 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General...F13.11.03
CERTIFICATE OF COMPLIANCE
Issued to: National Guard Products Inc. 4985 E Raines Rd Memphis, TN 38118 This is to certify that representative samples of Gasketing and Edge-sealing Materials for Fire Doors, Positive-pressure Tested
500 SERIES. Standard-Duty Grade 3 Surface Applied Closers. Standard Features. 3 hours fire rated. door openings. closing speeds
500 SERIES Standard-Duty Grade 3 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 3, 500,000 cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer Cast
D100/D200. Deadbolt service manual
D100/D200 Deadbolt service manual Contents 5 Introduction 5 Guide to Index Symbols for Lock Assembly Drawings 7 Lock Assembly Drawing Index 9 Lock assemblies 10 D111G (SFIC), D111P: Classroom Function
S110 Steel Level Panel Installation Instructions
S110 Steel Level Panel Installation Instructions NOTE: Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by installer. It is the installer s resposibility
D. ACCESSORIES ADAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANDLES & LIFT CORDS GALVANIC PROTECTION KITS MUSHROOM STRAINER
. ACCESSORIES AAPTER KITS IMPELLER & SEAL INSTALLATION TOOLS CARRYING HANLES & LIFT CORS GALVANIC PROTECTION KITS MUSHROOM STRAINER SLUGE STRAINERS NEMA 4 WATERTIGHT CONTROL & UAL LEVEL CONTROL (Replaces
Salice 4100 Tower Bolt
Salice 4100 Tower Bolt 4100 Rod - 600, 900mm 4100A - (400mm X 49mm) 4100B - (350mm X 49mm) 4100C - (300mm X 49mm) 4100D - (250mm X 49mm) - Brass - POV, AO/POV Tower Bolts Salice 4199 Tower Bolt 4199/D
Rev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
CONCEALED DOOR CLOSERS
CONCEALED DOOR CLOSERS Model chart Without hold-open Model No. Applicable door size Applicable door thickness (mm) With hold-open With backcheck Width (mm) Weight (kg) Steel door Wooden door age COU-52
Introduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03
Assembly Instructions for the Rolling Harrow and Board Turbo-Till 6/26/03 Your initial action is to locate the correct drag frame [(61) 589-107H through 589-116H]. Bolt the drag frame to the rear drag
Superstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
hockey hockey Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Hockey Goals Folding Wheelaway Goals
hockey www.harrod.uk.com 67 Integral Weighted Goals Aluminium Goals Fence Folding Goals Premier Folding Wheelaway Goals Freestanding Goals Socketed Goals Backboards Nets Indoor Posts hockey setting the
WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
CERTIFICATE OF APPROVAL No CF 111 ALLEGION (UK) LIMITED
CERTIFICATE OF APPROVAL No CF 111 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Bescot Crescent, Walsall,
Plans and Instructions to build a folding reflector oven
Plans and Instructions to build a folding reflector oven Kayak2go.com also has folding kayak plans available for purchase. The low cost and ease of construction make the folding kayaks a great youth group
3190A NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS. Series MODEL NO
NEO-ANGLE DOOR INSTALLATION INSTRUCTIONS Series 30A Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. The Exploded Diagram
1. Section Summary for loose climbing equipment provided by Owner. 2. Section "Cast in Place Concrete"
SECTION 131200 CLIMBING WALLS PART 1 - GENERAL 1.1 SUMMARY A. Work included: 1. Provide seamless textured substrate, panel-formed interior climbing wall system with internal structural support system,
Advantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
Owners Manual. Models 4420BF1U & 4420BF1L Floor Mounted Bi-Level Bottle Filler Tubular Fountain
Owners Manual Models 4420BF1U & 4420BF1L Floor Mounted Bi-Level Bottle Filler Tubular Fountain Models (LK)4420BF1U* Models (LK)4420BF1L* INSTALLER 4420BF Fountains are among the easiest to install Fountains
Test Report. Test Report Smart Systems Limited Incorporating Smart Extrusions. Page 1 of 78
Test Report 8365614. Smart Systems Limited Incorporating Smart Extrusions Page 1 of 78 Introduction. This report has been prepared by Adam Pearce and relates to the activity detailed below: Job/Registration
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Refrigerated Marblyte Fountains with Back Panel HRFG - ER HRFG - SR HRFG - SER Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS
XCE: Explosionproof Control Enclosures
XCE SERIES XCE: Explosionproof Control Enclosures FEATURES 64 standard sizes available Pre-drilled for hinges (hinges optional) Pre-drilled for sub-panel (sub-panel optional) One-piece, NEMA 4 water-tight
SIF Exploded Views 10/3/2016
SIF Exploded Views 10/3/2016 Direct Drive Square Inline Fan 9-10 Direct Drive Square Inline Fan - Part Information Item # Description of Parts 9DD # 10DD # 9DD-SS # 10DD-SS # 1 Base SIF910DDBASE 1 SIF910DDBASE
Superstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
Taking Your Own Track Measurements
Taking Your Own Track Measurements Measuring for the Outside Wiper Before you start measuring the outside wiper, look at your overall track and identify the clearances and contact points. Clearances are
HLS 9000 Swing Door Handle Edition 4
HLS 9000 Swing Door Handle Edition 4 Dallas Series Straight, modern lines. Clean, contemporary appearance. Dallas Series has rapidly grown to one of the most popular styles in our product range. See page
Installation Guide RHT-380. This Manual Must Be Read Before Operating The Equipment CUSTOMER COPY
Installation Guide This Manual Must Be Read Before Operating The Equipment RHT-380 Madison Heights, Michigan 48071 800-725-8377 www.snowexproducts.com CUSTOMER COPY Trynex International 2013 (REV B) F50767
Building Code Guidelines for Residential Pools
Building Code Guidelines for Residential Pools KEEP YOUR POOL SAFE Department of Development and Permits 306 Cedar Road, City Hall 2 nd Floor Chesapeake, VA 23322 Phone: (757) 382-6018 E-mail: develop-permits@cityofchesapeake.net
CERTIFICATE OF APPROVAL No CF 877 ZOO HARDWARE LTD
CERTIFICATE OF APPROVAL No CF 877 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of ZOO HARDWARE LTD Unit
K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
ECP Series Explosionproof Enclosures for OEM Applications. Optimized design, extensive sizes, and fast lead times.
ECP Series Explosionproof Enclosures for OEM Applications Optimized design, extensive sizes, and fast lead times. ECP Series Explosionproof Enclosures, the latest addition to our portfolio of electrical
GEN20AD-GEN20AL-GEN18AN
AD-- Parts List 02-August-16 This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-ad--.pdf for the current revision. Standby Generators Table of Contents
Important Information
Kayak Stack (S50) Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the bike rack is installed in the correct locations.
Take a closer look at; Parts - Equipment Systems
K www.segaquatics.com Take a closer look at; Parts - Equipment Systems Design - Performance - Energy Efficiency Fountain Equipment Vaults Pool / Spa Equipment Systems - Filter Tanks Collector Tanks - Commercial
5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
M ARTI N S TR8 FEEDER 508T BEEF-RITE FEEDER WBF 36" BUNK FEEDER NEED!
M ARTI N S TR8 FEEDER 508T BEEF-RITE FEEDER WBF 36" BUNK FEEDER NEED! # HDS8 SUPER HEAVY DUTY ROUND BALE FEEDER 1½" x 1½" x.100 wall square tubing frame 1¼" x 1¼" x.100 wall square tubing slant bars 54
We can make custom parts that work with many top office furniture manufacturers such as:
About Premium Machine and Tool Premium Machine and Tool, Inc. specializes in the manufacturing of custom office furniture parts and hardware. All of our work is performed in our Lyons, Michigan manufacturing
Product: Aluminium Door Edge Guard
: : DEB-44-AA 44mm Square profile, brush and intumescent DEB-46-AA 46mm Square profile, brush and intumescent DEB-55-AA 55mm Square profile, brush and intumescent DEE-45-AA 45mm Rounded profile, longer
Bike-Shell Model 301P
Bike-Shell Model 301P NEW design, one piece FRP Composite bike locker NO ASSEMBLY required Specify the 300 Series lockers for the highest customer satisfaction from the no-assembly ready-touse delivery
Table of Contents Auxiliary Locks
Copyright 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series
ORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
THE ARENA TABLE OF CONTENTS 6 THE ARENA OVERVIEW Dimensions and Tolerances... 2
Section 6 THE ARENA TABLE OF CONTENTS 6 THE ARENA... 2 6.1 OVERVIEW... 2 6.1.1 Dimensions and Tolerances... 2 6.2 PLAYING FIELD... 4 6.2.1 Boundaries and Markings... 4 6.2.2 The RACK... 5 6.3 GAME PIECES...
For optimum sealing apply strips of NOR 710 seal over hinge blades with 710 seal blades to align with 720 seal blades. NOR 710 NOR 720 NOR 855
Rw.29dB ~ Rw.34dB Strebord 54mm - Double Leaf - Single Swing - Flush Door - Storey Height - with Flush Overpanel. Acoustic Assessments Fig. 10a.24 10a.25 12x12mm offset rebate with seal OVERPANEL SEALING:
DEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
Product: Aluminium Door Edge Guard
: : DEA-[width]-AA Rounded profile, brush and intumescent DEB-[width]-AA Square profile, brush and intumescent Rounded profile, longer leg, brush and intumescent Page 1 of 5 Product Description Fitted
Rev S Terminator Parts Book Page 1 of 14 Top E nd
1181387 Rev S.2017.01.17 Terminator Parts Book Page 1 of 14 Top E nd 1181387 Rev S.2017.01.17 Terminator Parts Book Page 2 of 14 Top E nd Terminator: Frame Assembly PER CHAIR Frame Only: Aluminum for Folding
Universal Elevator Mount Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI U.S.A.
REQUIRED TOOLS AND MATERIALS: 2 Capable Adults Carpenter s Level 15 Tape Measure Pencil Universal Elevator Mount Owners Manual Customer Service Center N53 W2400 South Corporate Circle Sussex, WI 530 U.S.A.
RZR 900 Hitch Mount Plate
RZR 900 Hitch Mount Plate Polaris RZR 900 2015+ Part #: 5801119 Rev. 031017 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro
REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
TOWN OF AURORA. Pool Enclosure Permit Guide. PLANNING AND BUILDING SERVICES Building Division
TOWN OF AURORA Pool Enclosure Permit Guide PLANNING AND BUILDING SERVICES Building Division Phone: 905-727-3123 ext. 4388 Fax: 905-726-4731 Email: building@aurora.ca Town of Aurora 100 John West Way, Box
HEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
Avenger Model 33M Installation & Operation Instructions
Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:
Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook
Manhole Accessories Channel Bracket Support Cable Bracket Bearer Locking Pin Foundation Bolt Iron Anchor Step Manhole Sump Grill PVC/Steel Ladder Ladder Support & Hook Manhole Guard Lifter Manhole Ventilator
This parts list is current as of the above revision date. See for the current revision.
Parts List This parts list is current as of the above revision date. See http://www.rheempartslists.net/92-42800-.pdf for the current revision. Condensing Units Table of Contents Model Explanation...................................................................................................................
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
PARTS FAX
NOR-LAKE INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 800-955-5253 715-386-2323 800-388-5253 PARTS 715-386-6149 FAX www.norlake.com KOLD LOCKER WALK-INS NORLAKE Coolers, Freezers
TBV OPERATION AND MAINTENANCE MANUAL SERIES 2800: FLANGED BALL VALVE. For technical questions, please contact the following:
TBV OPERATION AND MAINTENANCE MANUAL SERIES 2800: FLANGED BALL VALVE For technical questions, please contact the following: Engineering Department 1537 Grafton Road Millbury, MA 01527 Phone: (508) 887-9400
Check with local zoning official for property line distance requirements.
RESIDENTIAL POOL PLAN SUBMITTAL GUIDELINES The following guidelines are intended to assist municipal residents with the permit acquisition process with regard to pools, spas and hot tubs for single family
! CAUTION! ! WARNING! General Information
Great Plains Mfg., Inc. Installation Instructions Used with: 2SF24, 24-Foot Two-Section Drill General Information Two-Section, Hydraulic Folding Marker 2SF30, 30-Foot Two-Section Drill 2SBM30, 30-Foot
BUILDERS HARDWARE SECTION 6 INDEX
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleasant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
To address this issue, Ariens Company has developed two cradle plates kits:
Date: August 21, 2012 No. B-2093 Service Bulletin Ariens Company 655 W. Ryan St. Brillion, WI 54110 www.gravely.com Product Family: Pro-Turn 400 Mowers Subject: Possible Foot Plate Weld Fracture Dealer
EZ SERIES FIXED ACCESS LADDERS
EZ SERIES FIXED ACCESS LADDERS Engineered from the ground up for OSHA 1910.3 COMPLIANCE Installs in three easy steps 1 ATTACH MOUNTING BRACKETS PLACE RUNG IN BRACKET 3 SECURE WITH BOLTON CAPTURE PLATE
REVIEW ALL INSTALLATION NOTES PRIOR TO INSTALLATION!
Page 1 of 7 HD NON-PENETRATING ROOF MOUNT ASSEMBLY INSTRUCTIONS REVIEW ALL INSTALLATION NOTES PRIOR TO INSTALLATION! INSTALLATION NOTES General 1) These general structural notes are intended to augment