HARDWARE. Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessories... A4...
|
|
- Hope Reed
- 5 years ago
- Views:
Transcription
1 front line Table of Contents A4 1 HARDWARE Section Page Push / Pulls... A Pivots... A Hinges, Locks and Cylinders... A Handles, Locks and Accessies... A Exit Devices... A Do Closers & Miscellaneous... A Thresholds... A Cal Architectural Products June 2009
2 A4 4 Push / Pulls front line PB401 PB401 Traditional Wire Bar 2 1/ Length PB f Dos up to 36 PB f Dos up to 42 Traditional Wire Bar made of smooth aluminum, 1 in diameter with a 2 1/4 projection on one end. PB f Dos up to 60 PH /4 PH401 Traditional Wire Pull Handle Traditional Wire Pull Handle made of smooth aluminum, 1 in diameter with a 2 1/4 projection. 10 Length. DH40 DH40 Traditional Wire Bar / Wire Pull Handle Combo Push / Pull Combination. Standard on all non-panic dos. Utilizes one PB401 Traditional Wire Bar and one PH401 Traditional Wire Pull. DH41 DH41 Traditional Wire Bar Combo Double acting dos. Utilizes two PB401 Traditional Wire Bars. DH42 DH42 Traditional Wire Pull Handle Combo 9 CTL / Back to Back offset aluminum do. Utilizes two PH401 Traditional Wire Pull Handles. (This confi guration requires a Mounting Kit.) June 2009 Cal Architectural Products
3 front line Pivots A4 3 DH101 DH102 DH101 Top Frame Ption DH102 Top Do Ption The cast aluminum DH102 Top Do Ption secures do in place with a spring loaded steel pin which projects into a bronze bushing in the DH101 Top Frame Ption. DH103 DH104 DH105 DH103 Bottom Do Ption Flo Ption DH104 - Right Hand DH105 - Left Hand The cast aluminum DH103 Bottom Do Ption uses a steel bearing with a bronze bushing and rotates on the steel machined stud of the DH104 DH105 Flo Ption. DH146 DH146 Bottom Center Pivot Assembly F Dos with Thresholds Bottom Center Pivot Assembly f dos with thresholds. Complete assembly. Consists of one DH114 and one DH116. Threshold mounted. DH145 DH145 Bottom Center Pivot Assembly F Dos without Thresholds Bottom Center Pivot Assembly f non-threshold conditions. Complete assembly. Consists of one DH114 and one DH115. Flo mounted. DH114 DH114 Bottom Center Pivot Center Pivot Bottom Do DH115 DH115 Flo Mount Flo Mount f Bottom Center Pivot DH116 DH116 Threshold Mount Threshold Mount f Bottom Center Pivot DH107 DH108 Intermediate Pivot Mtice Assembly DH107 - Left Hand DH108 - Right Hand Cast aluminum side jamb pivot recommended f extra wide tall entrances. 3/4 Offset to match the standard pivot set. Cal Architectural Products June 2009
4 A4 4 Hinges, Locks & Cylinders front line DH111HD-83 DH111HD-95 Continuous Gear Hinge DH111HD-83 f 84 Do Height DH111HD-95 f 96 Do Height Continuous Gear Butt Hinge. Heavy duty. DH109 DH110 Butt Hinge DH109 with Removable Pin DH110 with Non-Removable Pin 4 1/2 x 4 Butt Hinge. Five knuckle, commercial quality steel hinge with two ball bearings. DH070 DH060 DH061 DH062 DH070 Hook Bolt Lock Face Plates DH060 Left Hand Beveled DH061 Right Hand Beveled DH062 Radiused Face Plate Standard Hook Bolt Lock. Five-ply laminated steel hookbolt. Standard backset on 212NS, 375MS, and 500WS dos is 1 1/8. Accepts any standard 1 5/32 mtised cylinder thumb turn with MS cam. Face Plate Finishes: Clear, Bronze DH084 DH090 DH065 DH064 DH063 DH084 Deadlatch Lock Face Plates DH065 Left Hand Beveled DH064 Right Hand Beveled DH063 Radiused Face Plate DH090 Strike Deadlatch lock. Field reversible f opposite hand. Designed to offer the fl exibility of traffi c control during and after business hours. Allows the bolt to be permanently retracted f two-way traffi c during business hours and exit only at other times. Not considered maximum security. Standard backset is 1 1/8. Accepts any standard 1 5/32 mtised cylinder. Face Plate Finishes: Clear, Bronze DH074 DH074 Lock Indicat Lock Indicat Set designed f use with DH070 to indicate the lock position (open locked). May be used to comply with some local building safety codes. DH078 Cylinder DH079 Thumb Turn DH078 Cylinder 1 5/32 Diameter Cylinder DH079 Thumb Turn 1 5/32 Diameter Thumb Turn DH080 Dummy Cylinder DH081 Rim Cylinder DH080 Dummy Cylinder 1 5/32 Dummy Cylinder DH081 Rim Cylinder 1 5/32 Rim Cylinder f panic dos. DH082 Cylinder Guard DH073 Cylinder Pad DH082 Cylinder Guard Cylinder Guard f exteri of do. Includes hardened steel collar designed to protect cylinder from prying twisting attempts. (Cylinder not included.) DH073 Cylinder Pad Mtise Cylinder Mounting Pad f standard 1 5/32 cylinder. Used f Jackson 2086 panic. June 2009 Cal Architectural Products
5 front line Handles, Locks & Accessies A4 5 DH071 DH072 DH071 2 Point Lock Complete 2-Point Lock with threshold bolt and face plate. DH072 3 Point Lock Complete 3-Point Lock with threshold bolt, header bolt and face plate. DH076 DH07696 DH176 DH17696 DH091 DH092 DH076 Flush Bolt DH07696 Flush Bolt DH176 Flush Bolt DH17696 Flush Bolt Paddle Handle DH091 - Left Hand DH092 - Right Hand Standard Flush Bolt without guides. 1/8 Offset without guides x 7/8 back set. Standard Flush Bolt without guides. 1/8 Offset without guides x 7/8 back set. Set with extended rod f 96 do. Standard Flush Bolt without guides. 1/8 Offset without guides x 7/8 back set. Set with steel tips. Standard Flush Bolt without guides. 1/8 Offset without guides x 7/8 back set. Set with extended rod f 96 do with steel tips. Paddle Handle with CAM f DH084. DH093 DH094 Lever Handle DH093 - Left Hand DH094 - Right Hand Lever Handle with CAM f DH084. Handed. DH098 DH098 Electric Strike 1 1/4 x 6 7/8 Electric Strike offers a variety of options including A.C. D.C. voltage, and intermittent continuous duty. Can be converted to fail safe in fi eld. DH099 DH099 Electric Strike Adams Rite 71R2 Electric Strike f metal jamb Cal Architectural Products June 2009
6 A4 6 Exit Devices front line DH2086 Includes PH401 Pull Handle and Cylinder f active do. Concealed Vertical Rod Push Pad Exit Device DH2086R Right Hand DH2086L Left Hand Concealed Vertical Rod Push Pad used f hurricane impact dos. Handed. Available f dos widths of 30 and 48. DH3692 Includes PH401 Pull Handle and Cylinder f active do. Concealed Vertical Rod Push Pad Exit Device DH3692 Concealed Vertical Rod Push Pad used f standard dos. Pullman latch at top. Bolt at bottom. Field reversible. Available f dos widths of DH3792 Rim Mounted Push Pad Exit Device Rim Mounted Push Pad Exit Device. Non-handed. Includes Type C strike. Select and add f different strike. Available f dos widths of Includes PH401 Pull Handle and Cylinder f active do. DH3792 DH3192 Includes PH401 Pull Handle and Cylinder f active do. Mid-Panel Push Pad Exit Device DH3192R Right Hand DH3192L Left Hand Mid-Panel Push Pad Exit Device. Handed. Pullman latch at top. Bolt at bottom. Available f dos widths of Removable Mullion f Rim Panic Do Pair DHRM Length DHRM Length DHRM Length Removable Mullion f Rim Panics. 2 Security clips, top and bottom mounting brackets, 2 do mtise strike set. June 2009 Cal Architectural Products
7 front line Do Closers & Miscellaneous A4 7 CL026 CL030 CL031 CL026 Tri-Style Surface Closer CL030 Top Jamb Bracket CL031 Drop Plate Standard closer f 36 to 42. No hold open adjustable back-check. Valve controls f latching and closing speeds. Top Jamb Bracket Drop Plate CL028 CL028 Barrier Free Closer Adjustable Barrier Free Adjustable Closer. Meets ADA standards f exteri dos 36 to 42. No hold open adjustable spring power (8 1/2-5 Lbs.). Adjustable back-check, dress cover and parallel arm bracket included. CL290 CL205 CL190 CL105 DH147 Concealed Closers No Hold Open CL CL Concealed Closers Hold Open CL CL DH147 Side Load Arm Concealed Closers. No hold open. Concealed Closers with adjustable back check. Hold open. Top Arm Assembly f center pivot dos. DH152 DH153 DH152 Offset Arm DH153 Slide Channel Offset Arm. Requires D102 Top Rail on NS213 Dos. (Included with standard dos.) Slide Channel. Requires D102 Top Rail on NS213 Dos. (Included with standard dos.) CS112-1 DH117 WS136 WS142 WS160 CS112-1 Cover Plate DH117 Cover Plate Do Sweep with Weathering WS Do WS Do WS Show Room Do Cover Plate f Center Pivot. Cover Plate f Offset Arm. 3-11/16 x 12-1/2 with radius cner. Aluminum weatherstrip f do bottom rail. Includes wool pile. Cal Architectural Products June 2009
8 A4 8 Thresholds front line Prepared TH4 Thresholds 1/2 x 4 Mill Finish F Standard Butt Hung Frames Butt Hung Fab f 3600 Panic F Standard Offset Pivot Frames Offset Pivot Fab f 3600 Panics F Standard Center Pivot Frame Threshold Fab f 3100 Panics Threshold Fab f 3100 Panics TH4-36-AB TH4-42-AB TH4-72-J TH4-96-J TH4-36-AP TH4-36-BP TH4-42-AP TH4-42-BP TH4-72-JP TH4-36-C TH4-36-D TH4-42-C TH4-42-D TH4-72-K TH4-96-K TH4-36-CP TH4-36-DP TH4-42-CP TH4-42-DP TH4-72-KP TH4-36-GH TH4-42-GH TH4-72-M TH4-36-AP-3192 TH4-36-BP-3192 TH4-42-AP-3192 TH4-42-BP-3192 TH4-72-JP-3192 TH4-36-CP-3192 TH4-36-DP-3192 TH4-42-CP-3192 TH4-42-DP-3192 TH4-72-KP-3192 Standard Single Butt Hung f 36 Do Standard Single Butt Hung f 42 Do Standard Pair Butt Hung f 72 Do Standard Pair Butt Hung f 96 Show Room Do Standard Single Butt Hung f 36 Panic Do Standard Single Butt Hung f 36 Panic Do Standard Single Butt Hung f 42 Panic Do Standard Single Butt Hung f 42 Panic Do Standard Pair Butt Hung f 72 Panic Do Standard Single Offset Pivot f 36 Do Standard Single Offset Pivot f 36 Do Standard Single Offset Pivot f 42 Do Standard Single Offset Pivot f 42 Do Standard Pair Offset Pivot f 72 Do Standard Pair Offset Pivot f 96 Show Room Do Standard Single Offset Pivot f 36 Panic Do Standard Single Offset Pivot f 36 Panic Do Standard Single Offset Pivot f 42 Panic Do Standard Single Offset Pivot f 42 Panic Do Standard Pair Offset Pivot f 72 Panic Do Standard Single Center Pivot f 36 Do Standard Single Center Pivot f 42 Do Standard Pair Center Pivot f 72 Do Single Butt Hung f 36 Panic Do Single Butt Hung f 36 Panic Do Single Butt Hung f 42 Panic Do Single Butt Hung f 42 Panic Do Pair Butt Hung f 72 Panic Do Single Offset Pivot f 36 Panic Do Single Offset Pivot f 36 Panic Do Single Offset Pivot f 42 Panic Do Single Offset Pivot f 42 Panic Do Pair Offset Pivot f 72 Panic Do DP200-2 Stop f Panic Dos 2 Stop f panic dos. Includes two AS20 screws June 2009 Cal Architectural Products
DEADLATCHES LK-2100 SERIES ASSEMBLY DETAILS LK R-RH
LK-2100-40-R-RH 7:07 2 x csk. holes to suit M5 LK-2100-40-R-RH Right hand door FX079XSLF x 4 1 LK-2100-70 LK-2100-70 AC021 LK-2100-40-R-RH 2 3 4 Complete assembly should consist of:- LK-2100-40-R-RH Lock
More information500 SERIES. Standard-Duty Grade 3 Surface Applied Closers. Standard Features. 3 hours fire rated. door openings. closing speeds
500 SERIES Standard-Duty Grade 3 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 3, 500,000 cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer Cast
More informationADA COMPLIANCE CHECKLIST (RESTAURANT) Meet Fail N/A. Parking Lot
ADA COMPLIANCE CHECKLIST (RESTAURANT) Parking Lot Tow away warning at entrance to lot Accessible spaces - minimum 1, and at least 1 for each 25 spaces (e.g., 26 spaces requires 2 accessible spaces) Accessible
More informationK13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
More informationMACHINING OF VT FIRE RATED DOORS BY OTHERS
MACHINING OF VT FIRE RATED DOORS BY OTHERS In der f another company to machine VT fire rated dos, the company must write a letter to VT requesting to become a licensed machiner of fire rated dos manufactured
More informationBUILDERS HARDWARE SECTION 6 INDEX
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleasant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
More informationS110 Steel Level Panel Installation Instructions
S110 Steel Level Panel Installation Instructions NOTE: Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by installer. It is the installer s resposibility
More informationDEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
More informationP STYLE 6 LH 5 RH 4 LRH
8 4 1.5 TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 8 RECOMENDED MAX HEIGHT 1/ (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT (15mm) TEMPERED
More informationInterconnected Lock ANSI Grade 2 Medium Duty GF2 Series
Interconnected Lock ANSI Grade 2 Medium Duty GF2 Series Features The GF2 Series interconnected locks bring together the functionality of the cylindrical locks with the security of the auxiliary deadbolt
More informationP STYLE 6 LH 5 RH 4 LRH
8 42" 1.11 1.8 1.5 1.2 OPP. 1.11 3 SIDELITE OPENING 3 SIDELITE OPENING TYPICAL HURCULITE WEDGE-LOCK DOOR ELEVATIONS 1.7 1.9 1.1 1.2 14 1.9 1.7 OPP. 8 3 24 7/8" DLO 1 11/1 8 11 1.7 1.7 OPP. 1.9 1.3 1.4
More informationTHOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
More informationtubular EntrancE sets 6
tubular entrance sets Item Qty Part No. Part Name 1 1 6420.xxx.00052 Cylinder Collar 2 1 6420.xxx.00012 Large Plate 3 1 6420.xxx.00022 Small Plate 4 1 2598.xxx.00013 Door Pull 5 1 5300.xxx.95115 Thumbpiece
More informationTrilogy Theory of Operation
INSTALLATION & OVERVIEW... 2 Load Height... 2 Approach Angle... 2 Footprint... 3 Protrusion... 3 Mounting the... 4 General Torque Specs... 4 OPERATION OF BIKE RACK... 5 Loading Bikes... 5 Unloading Bikes...
More informationGrade 2 Interconnected Locksets DORMA J200
Grade 2 Interconnected Locksets DORMA J200 Table of Contents Features DORMA s J200 Series Grade 2 interconnected locksets provide exceptional security, enhanced aesthetics, and rugged dependability. These
More informationStand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS
1 Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new Stand-N-Fish Kayak Fishing System. Once installed on your kayak the Stand-N-Fish will take your kayak fishing
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationCRL CLOSER FEATURES. DC51 1 Not Rated Not Available Not Available Reversible Tri-Style Pkg Independent Regular Optional Arm Aluminum UL 10 Years
CRL CLOSER FEATURES C.R.L. SURFACE CLOSER FEATURES AND SPECIFICATIONS CLOSER SPRING CONFORMS BACKCHECK ADA DELAYED STANDARD CLOSE & LATCH STANDARD MODEL SIZE ANSI GRADE STANDARD BARRIER-FREE ACTION COVER
More informationP STYLE 6 LH 5 RH 4 LRH
42" [1067] HARDWARE FOR 3/8"- 1.9 1.8 1.5 1.2 STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 3/8" (10mm) TEMPERED = 84" RECOMENDED MAX HEIGHT 1/2" (12mm) TEMPERED = 108" RECOMENDED MAX HEIGHT OPP. 1.9 3
More informationPneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
More informationSliding Arm. EN1154 (Inc.EN1634part.1) 500,000cycles RYOBI. Overhead door closer D-1200 SERIES
Sliding Arm EN14 (Inc.EN164part.1) 500,000cycles Overhead closer RYOBI Overhead closer Model chart Size Without hold-open Without backcheck With backcheck width Size Standard application D-1200 D-1200
More informationTable of Contents Auxiliary Locks
Copyright 2003, 2004, 2007-2013, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents SSL1 Spring Latch For Security SideLight Applications...1 8200 Series
More information340/430 Truck Mount Parts Manual
340/430 Truck Mount Parts Manual Table Of Contents Page Content 1 EXTERNAL BACK ILLUSTRATION 2 EXTERNAL BACK 3 MAIN HYDRAULIC DRIVE 4 BOTTOM REAR PTO DRIVE ASSEMBLY 5 REAR SPEED REDUCTION & TUMBLER DRIVE
More informationTSX1600L Rite-Lock Power Arm Kit, left Stowing W/One Top Mount Pivot W/20" Base & 27" Upper
Ref TSX1600L Tarp System, Left Stowing Top Mount W/ Long Upper SN:TS 1 1 10210 Gear Motor, Tarp Stretcher w/5 Year Warranty 24V - S/N: TS 1 2 103810L Pivot, Assembled Front Arm for 103796 Power Kit Passenger
More informationINSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008
INSTALLATION INSTRUCTIONS PUSH BAR PULLMAN PANIC BOLT DEVICE TO EN 1125 : 2008 0376/448/00 ISSUE 01 EMERGENCY PUSH PAD PULLMAN BOLT DEVICE TO EN 179 : 2008 1000mm MAXIMUM CLEAR OPENING HEIGHT WITH PUSH
More informationhhmillworks.com 1937 Troup Valley Road Mt. Pleaseant Mills, PA Fax
BUILDERS HARDWARE SECTION 6 INDEX hhmillworks.com 1937 Troup Valley Road Mt. Pleaseant Mills, PA 17853 570-539-2611 800-326-9873 Fax 570-539-2379 800-718-4463 Product Page Effective Date Revised Date Lockset
More informationCRL COMMERCIAL PATCH HARDWARE WEDGE LOCK STYLE FOR 5/8"-3/4" GLASS TYPICAL HURCULITE WEDGE-LOCK GLASS DOOR ELEVATIONS P STYLE
42" [1067] HARDWARE FOR 5/8"- 1.5 1.9 1.8 1.2 OPP. 1.9 3 1/2" [88] 24 7/8" [632] DLO 1 11/16" [42] 84" [2134] 114" [2896] STANDARD WEDGE LOCK DOOR (HEIGHT) GUIDELINES 5/8" (15mm) TEMPERED = 84" RECOMENDED
More informationBeauty-Line Windows (1957 to 1979)
Beauty-Line Windows (1957 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More informationSanta Fe Cycles Assembly Guide Introduction
Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and
More informationMODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
More informationHLS TM 7 Series* Multipoint Hardware System. Edition 2
HLS TM 7 Series* Multipoint Hardware System Edition 2 1 HLSTM 7 Series* Multipoint Hardware System... the next generation of Multipoint Locking Systems from HOPPE North America, Inc. Stainless Steel and
More informationFIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE
FIRE DOOR CAPABILITY CHART - 20-MINUTE POSITIVE PRESSURE Fire Rating 5-Ply Wood HPDL Do Only Do w/ Transom 1 5509 909 5P09 9P09 over up to 5502 303 404 over up to 5P09 9P09 5P09 9P09 3-0 5508 5P08 8 8P08
More informationSlide and Turn System SF35
Profile system Framed slide and turn system Non-thermally insulated aluminum profiles with insulated glass Option of flush or weathered bottom track The flush bottom track is particularly suitable for
More informationInvacare Top End Parts Catalog
40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Invacare Top End Parts Catalog Rev. A Jan, 200 Top End 40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Frame / Parts 27 28
More informationK Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
More informationMSA Confined Space Entry Equipment
MSA Confined Space Entry Equipment Because every life has a purpose... MSA Confined Space Entry Equipment MSA XTIRPA Manhole Guard System Use for confined space vertical entry and fall protection when
More informationLivestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
More informationMODEL CHEST PULLEY SYSTEM
MODEL 9180 CHEST PULLEY SYSTEM 1 PARTS LIST FOR CHEST PULLEY Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your facility.
More informationby Master Halco ANCHOR GATE SYSTEMS Swing Gates Overhead Slide Gates Cantilever Slide Gates Vertical Lift Gates Fencing Without Boundaries.
by Master Halco ANCHOR GATE SYSTEMS Swing Gates Overhead Slide Gates Cantilever Slide Gates Vertical Lift Gates Fencing Without Boundaries. The Better Way To Build Your Cantilever Slide Gates... The Principle
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationHES 1006 Electric Strike
HES 1006 Electric Strike The 1006 Series is also available in a Complete One Box Solution 3 Works with all cylindrical and mortise locksets with or without a deadbolt The strongest, most versatile electric
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationNATOLI ENGINEERING CO. MANUFACTURED REPLACEMENT PARTS FOR KIKUSUI TABLET PRESSES NATOLI ENGINEERING COMPANY, INC. PREMIUM
NATOLI ENGINEERING CO. MANUFACTURED REPLACEMENT PARTS FOR TABLET PRESSES NATOLI ENGINEERING COMPANY, INC. PREMIUM version version 022018 1.15 You Get More From a Natoli Part Natoli Engineering Company,
More informationHES 1006 Electric Strike
3 HES 1006 Electric Strike Works with all cylindrical and mortise locksets with or without a deadbolt Also available in a Complete One Box Solution The strongest, most versatile electric strike available.
More informationRehabPro Speed Pulley (M100S & M100FS) User Manual
RehabPro Speed Pulley (M100S & M100FS) User Manual 1. Inspection of Delivery Before unpacking the Pulley please inspect the packaging for shipping damage. Observable damage should be noted prior to signing
More informationVISIT THE LIFETIME WEB SITE: **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED,
MODEL #73729 WARNING Failure to comply with any of the warnings in these instructions may result in serious personal injuries such as cuts, broken bones, nerve damage, paralysis, brain injury, or death.
More informationFontaine Fifth Wheel Ultra LT Rebuild Procedures
Fontaine Fifth Wheel Ultra LT Rebuild Procedures Disassembly Assembly Adjustments 800-874-9780 2010 LT-147 January 2010 Dissassembly Cover plate removed for clarity. Refer to exploded view of assembly
More informationOWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved
OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationParts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
More informationListe de pièces Lista de Piezas Parts List
S Liste de pièces Lista de Piezas Parts List 4 4-14 April 014 1 1 14 1 13 13 17 8 7 1 3 4 11 1 1 0 Singer S Ref No Part No Part Name 1 800400 Front cover (unit) S NA Front cover 3 N/A Button 4 N/A Button
More informationHLS 9000 Swing Door Handle Edition 4
HLS 9000 Swing Door Handle Edition 4 Dallas Series Straight, modern lines. Clean, contemporary appearance. Dallas Series has rapidly grown to one of the most popular styles in our product range. See page
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationFlagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
More informationI Illustrated Parts List 650 CRT B. Tiller. Repair Parts Manual
Illustrated Parts List 2001-11 I0102042 650 CRT B 954328030 Repair Parts Manual Tiller HANDLE ASSEMBLY 1 532 18 06-34 Control, Throttle 2 532 00 92-66 Grip, Handle 4 532 15 92-28 Bar Assembly, Control
More informationProduct Catalogue. Version 8.0. GSection. Hendrickson Suspension
Product Catalogue GSection Version 8.0 Hendrickson Suspension Section G Air Suspension Components Hendrickson HTE Suspension G:28 PRODUCT CATALOGUE 8.0 Hendrickson HTE Suspension - Part List Part No. Item
More information310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment
OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility
More informationMODEL 6000SA STAMP AFFIXER Parts Manual. Postmatic, Inc.
POSTMATIC, INC. MODEL 6000SA STAMP AFFIXER Parts Manual Postmatic, Inc. 9405 Holly Street Ste D Minneapolis, MN 55433 Phone 763-784-6046 Toll Free 888-784-6046 Fax 763-784-9433 Table of Contents Assembly
More informationGENEVA - CHIP BOX\ Figure Front View
GENEVA - CHIP BOX\ Figure 5. 14-02 Front View REVERSE LOCK\ CLUTCH PULLEY ASSEMBLY MAGNET ASSEMBLY Figure 10. Clutch Drive Assembly NOTE: This is set at the factory and should not be belt take up
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationInvacare Top End Parts Catalog
Invacare Top End Parts Catalog T Titanium Top End Frames / Standard Parts Pre- July 2009 20 22 0 2 Pre- July 2009 9 2 2 Pre- July 2009 9 2 Titanium Head Tube Assembly see Casters / Forks on pg. 4 4 4 see
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationA. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
More informationRev J Terminator Parts Book Page 1 of 15 Top End
1181387 Rev J.2016.03.22 Terminator Parts Book Page 1 of 15 Top End 1181387 Rev J.2016.03.22 Terminator Parts Book Page 2 of 15 Top End (800) 532-8677 (727) 522-8677 fax: (727) 522-1007 Terminator: Frame
More informationSECTION SHOWER AND BATH ENCLOSURES. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.
SECTION 10185 SHOWER AND BATH ENCLOSURES Display hidden notes to specifier by using Tools / Options / View / Hidden Text. PART 1 GENERAL 1.1 SECTION INCLUDES A. Bathtub wall enclosures. B. Shower wall
More informationPer foot Prices. Chain Link. Iron Fence BUDGET FENCE COMPANY. us: (702) Gates (702) ' tall 8' tall. Automatic Gate Openers
BUDGET FENCE COMPANY Email us: Per foot Prices Chain Link from $6.00 per lin. ft. from $9.00 per lin. ft. ( includes wire, top rail, line posts, ties & loop caps) Materials Only Iron Fence from $20.00
More informationBetter security for everyone!
Better security for everyone! MANAGED KEY CONTROL Key Control is high security. A stolen or copied key is among the most common ways your security can be breached. CX5 key blanks are patented, geographically
More informationMODEL / SINGLE and DUPLEX PULLEY SYSTEMS
MODEL 922181/922182 SINGLE and DUPLEX PULLEY SYSTEMS MODEL 922181 SINGLE PULLEY SYSTEM MODEL 922182 DUPLEX PULLEY SYSTEM 1 PARTS LIST FOR SINGLE/DUPLEX COLUMN PULLEYS Note: Check with your architect or
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationTANDEM plus BLUMOTION 569F/569A installation instructions
TANDEM plus 569F/569A installation instructions inside Heavy duty full extension concealed runners Basic components Locking devices Runners New side adjustment New rear side adjustment Rotate side adjustment
More informationTwo-Wheel Hand Trucks
Two-Wheel Hand Trucks Lightweight, high strength aircraft grade aluminum. Engineered for optimum strength to weight ratio. Dual clinch aircraft style riveted construction. Personalization available to
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationReplaces Lesco 300 & 500 Parts
Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R
More informationSafidDampers. Class 1A & Class 1 Low Leakage Volume Control Damper ( Flange Type ) SPK Standard Construction. Description SPK
( Flange Type ) SPK 30 400 Standard Construction FRAME: 60mm x 30mm x.5mm (6 Ga.) galvanized steel formed channel for flange connection. BLADES: 00mm, 5mm and 50mm wide airfoil shaped blades extruded aluminum.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory (ROOF) P/N 08L07-E09-100 Application 6 PILOT Publications No. Issue Date JUN 5 PARTS LIST 6 Washers Bicycle attachment 2 Brackets Hex wrench 4 Knobs 2 Keys 1 Rear Bracket
More informationU STAND INSTALLATION INSTRUCTIONS
U STAND INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new U STAND by Stand N Fish. Once installed on your kayak the U STAND will enhance your kayak fishing enjoyment to a whole new
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationImportant Note: Tighten lock nuts so the support tubes still swing freely see figure 2. There must be 1 2 threads of bolt past end of lock nuts.
Kit Contents: DESCRIPTION QTY. DESCRIPTION QTY. 2 Shank Assembly 1 Support Tube Assembly 1 Side Tube - Short 2 1-1/4 Shank 1 Center Tube - Long 1 3/8-16 x 2.0 Carriage Bolt 2 5/16-18 x 2.25 Carriage Bolt
More informationFIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
More information4 1 /8" 4 5 /8" OUTSIDE INSIDE FUNCTION TYPE DESCRIPTION K Cylinder by Turnpiece Deadbolt by inside turnpiece or outside key.
Mortise Locks Mortise Deadbolts: 2 & 3 Series Features: Backset: Series 2: 2-1/2". Series 3: 2-3/4". Bolt Throw 1" Front 1-1/16 x 4-5/8 Finishes: Stock Finishes: US3 & US32D. US10, 10B and 32 may be special
More informationReplaces Ryan Sod Cutter Parts
Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationREPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID
PART REPAIR PART NUMBER NUMBER DESCRIPTION 0137 ELE 0136 ELE 12 VOLT SOLENOID 0203 WHL 0250 WHL WHEEL HUB 0251 WHL AXLE 0252 WHL DUST CAPS 0253 WHL TIRE - 210 SP 0204 WHL 0211 WHL TIRE & WHEEL - SP 0250
More informationILLUSTRATED PARTS LIST MFG. ID NO CUSTOMER CATALOG NO. MRT6 PRODUCT NO
ILLUSTRATED PARTS LIST MFG. ID NO. 600020 CUSTOMER CATALOG NO. MRT6 PRODUCT NO. 60 00-2 532 44 6-04 HANDLE ASSEMBLY 6 44 43 2 42 4 2 3 0 42 27 42 45 5 2 6 20 handle_assy_06 532 8 4-82 Control, Throttle
More informationBRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C
1 BRONZE BUSHING REPLACEMENT PROCEDURE V.2 12/3/2014 DN345 & NL450C 2 Safety Instructions Removing Walking Beams 3 1. Position spreader on a flat concrete surface capable of supporting weight of spreader
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More information3303 N. SAN FERNANDO BLVD BURBANK CA SHOWROOM: OFF FAX
BOBRICK GLOBAL GLOBAL or METPAR FIAT OFFSET SLIDE LATCH OFFSET SLIDE LATCH SLIDE LATCH SLIDE LATCH #302 B #302 G Offset #302 G #302 SANYMETAL SANTANA JACKNOB BOBRICK SLIDE LATCH SLIDE LATCH SS SLIDE LATCH
More informationi NOTE: This installation manual contains important information related to system
TRx Pivot Plus Manual Elevating Legrests (ELR) Installation and Set-Up Manual i NOTE: This installation manual contains important information related to system set-up and adjustments. Please forward to
More informationNext Generation Proline the finest in Airsoft
Next Generation Proline the finest in Airsoft Next Generation Proline series also consists of these refined components: Heat-resistant electric switch assembly Extremely solid shoulder stock Motor cover
More informationMaintenance Manual. Note: This document is broken up into the following 6 sections of prescribed maintenance.
How to Perform Maintenance On LPKF Circuit Board Plotters Requirements - LPKF Circuit Board Plotter - BoardMaster Software - 2.5 mm Allen wrench (for earlier model machines) - 3mm Allen Wrench - 4mm Allen
More informationFARM & RANCH EQUIPMENT
FARM & RANCH EQUIPMENT YOUR SOURCE FOR LIVESTOCK EQUIPMENT Cattle Chutes Cattle Chutes 2 Drop Down Side Pipe Side Exit STCD Deluxe Cattle Chute Preg Test Gate 12 long x 6.5 tall x 3.5 wide and weighs 2,100
More informationM16 R / M1600 R USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM.
ARMSCOR M16 R / M1600 R USER S MANUAL WARNING: READ THE INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM. DISCHARGING FIREARMS IN POOLY VENTILATED AREAS, CLEANING
More informationRehabPro Standard Pulley (M30, M50, M70, M30F, M50F, M70F)
RehabPro Standard Pulley (M30, M50, M70, M30F, M50F, M70F) User Manual RehabPro, Inc. 28215 North 25th Dale Phoenix, AZ 85085 602-317-7207 (phone) E-mail: sales@rehabpropulleys.com E-mail: kris@rehabpropulleys.com
More information5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
More informationSalice 4100 Tower Bolt
Salice 4100 Tower Bolt 4100 Rod - 600, 900mm 4100A - (400mm X 49mm) 4100B - (350mm X 49mm) 4100C - (300mm X 49mm) 4100D - (250mm X 49mm) - Brass - POV, AO/POV Tower Bolts Salice 4199 Tower Bolt 4199/D
More informationSLIDING RAIL SYSTEM 208-580-1904 www.fishfighterproducts.com FFP sliding Rail system The FFP Sliding Rail system will allow you to easily adjust the location of your rod holders, tackle trays, or just
More informationLCN 4040 SERIES SUPER SMOOTHEE
Cylinder Assemblies 4041-3071 Cylinder Assembly F Includes screw pack (SRT standard please specify other) Size 1 cylinder is adjustable from size 1-6 4041-3071DEL Cylinder Assembly w/delay F Includes screw
More informationThe Standard Collection Built on our tradition of raising industry standards.
The Standard Collection Built on our tradition of raising industry standards. Like the M Collection, these lever designs suite with exit devices and locks from our trusted Schlage and Von Duprin brands.
More informationSlide and Turn System SF25
Profile system Frameless all-glass slide and turn system Option of flush or weathered bottom track Optionally with lateral aluminium panel profiles to close the ventilation gap The flush bottom track is
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More information