EVENTS DIAGRAMS LIST

Transcription

1

2

3 EVENTS DIAGRAMS LIST No. I3.1 LEVEL 1 S Start area (off the carriageway) I3.2 inish area (off the carriageway) I3.3 Event travelling along the route / intersecting side road I3.4 Right hand turn at intersection I3.5 Left hand turn at intersection I3.6 Left hand turn at intersection Within a 1m coned chute I3.7 Left turn at roundabout I3.8 Turnaround point

4 Start area (off the carriageway) 1.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 2.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 3.Both MT to stop traffic as cyclists are released from the start area 4.The MT controlling the right hand lane may not be required if event participants will not be crossing the centre line 5.Refer to MT essentials for further information 6.TSL and speed 7.This TMD must be Thank you A A Start area Start/finish area RP4 RP41 I3.1 RP41 RP4

5 inish area (off the carriageway) 1.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 2.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 3.MT to stop traffic as bunches of cyclists approach the finish area 4.Refer to MT essentials for further information 5.TSL and speed 6.This TMD must be Thank you A A inish area I3.2 RP41 RP4

6 Event travelling along the route / intersecting side road Advance warning from rear 1.Advance warning provided by either: Static mounted T2A/B and appropriate supplementary plate (YLE RAE, RUNNERS, WALKERS) OR Tail pilot vehicle with appropriate rear mounted supplementary plate (YLISTS AHEAD, RUNNERS AHEAD WALKERS AHEAD) Note: Where cars or light utilities are used for sports events and inspections, only the appropriate supplementary sign is required Shadow vehicles (optional) 2.Optional to use shadow vehicle to protect cyclists/ runners/ walkers (normally the main bunch) 3.Each shadow vehicle has a PASS WITH ARE plate but no RD6 arrow Advance warning from opposite direction 4.Recommended for narrow and winding roads 5.Advance warning is provided by either: Static mounted T2A/B and appropriate supplementary plate OR Lead pilot vehicle with appropriate front mounted supplementary plate (YLISTS AHEAD, RUNNERS AHEAD WALKERS AHEAD) Intersecting roads 6.T2A and appropriate suppliment plate to be place on intersecting roads T230 Lead pilot Shadow vehicle TV4 Either B I3.3 A OR Tail pilot T230

7 Right hand turn at intersection 1.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 2.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 3.Both MT to stop traffic on the main road on the approach of cyclists on the side road 4.Refer to MT essentials for further information 5.TSL and speed 6.This TMD must be Thank you A A RP4 RP41 Main road RP41 RP4 I3.4 A

8 Left hand turn at intersection 1.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 2.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 3.MT to stop traffic on the main road on the approach of cyclists on the side road 4.Refer to MT essentials for further information 5.TSL and speed 6.This TMD must be Thank you A A Main road RP41 RP4 I3.5 A

9 Left hand turn at intersection Within a 1m coned chute 1.Install a 1m chute protected by cones on the traffic side to allow event participants to turn left at the intersection 2.Install a taper on the main road before the intersection to shift traffic laterally across the road so that it clears the coned chute 3.Dimension Lane Width will determine the TSL to be applied 4.TSL and speed 5.This TMD must be Thank you A A Main road TU41 I3.6 A

10 - Intersection or roundabout Left turn at roundabout I3.7 A RP4 RP41 RP41 RP4 A RP4 RP41 A A 1.Lane widths,, may need to be increased to allow for turning movements of larger vehicles 2.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 3.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 4.MT to stop traffic on the approach of cyclists 5.Refer to MT essentials for further information 6.TSL and speed 7.This TMD must be Thank you

11 Turnaround point 1.MT with RP4/RP41 STOP/GO or RP4/RP42 STOP/SLOW paddle on road shoulder located between 1st 2.Minimum 5 cones in cone threshold at: 2.5m centres - less 5m centres - more 3.MT to stop traffic on the approach of cyclists to the turnaround point 4.Refer to MT essentials for further information 5.TSL and speed 6.This TMD must be Thank you A Minimum 2 x A RP41 RP4 I3.8