DRAFT. NEW Products SWIVEL LOOP HANGER 100 LOOP HANGER SURGE RESTRAINT LHSR6. See page 20. See page 20
|
|
|
- Tobias Chapman
- 5 years ago
- Views:
Transcription
1 NEW Products SWIVEL LOOP HNGER 100 non-insulated pipe lines Features a retained insert nut to ensure that the loop hanger and insert nut stay together See page 20 LOOP HNGER SURGE RESTRINT LHSR6 Grips the loop hanger not the nut allowing fine tuning for height adjustment Installs without tools Restricts the upward surge movement of activated fire sprinkler systems DRFT See page 20 18
2 CHPTER NEW NEW Page 20 Page 20 Page 21 Page LHSR Page 2 Page 24 Page 25 Page FL Page 27 Page 27 Page VTR 418 Page FL N W E S 19
3 SWIVEL LOOP HNGER 100 Heavy Duty djustable and Hanger Size Range: 1/2 through 8 non-insulated pipe lines Features a retained insert nut to ensure that the loop hanger and insert nut stay together Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) NEW EG 1/2" /8 2-/ EG /4" /8-1/ EG 1" /8-5/ EG 1-1/4" /8-9/ EG 1-1/2" /8-1/ EG 2" /8 4-1/ EG 2-1/2" 1/2 5-5/8 1-1/ EG " 1/2 6-9/16 1-1/ EG -1/2" 1/ / EG 4" 5/8 7-/4 1-5/ EG 5" 5/8 9-1/8 1-5/ EG 6" /4 10-5/8 1-9/ EG 8" 7/8 1-1/8 1-5/ /4-8 1/2-8 LOOP HNGER SURGE RESTRINT LHSR6 Heavy Duty djustable and Hanger Size Range: fits 1/2 through 2 model 100 loop hangers Surface Finish: CDDY COT lack Restricts the upward surge movement of activated fire sprinkler systems Meets NFP 1 requirements One size fits 1/2 thru 2 sizes of the model 100 loop hanger Grips the loop hanger not the nut allowing fine tuning for height adjustment Installs without tools NEW 20
4 SWIVEL LOOP HNGER 115 djustable and Hanger with NFP Rod Sizes Size Range: 2-1/2 through 8 non-insulated pipe lines Manufactured to use the minimum rod size permitted by NFP for fire sprinkler piping Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) EG 2-1/2" /8 5-9/ EG " /8 6-9/ EG -1/2" /8 7-1/ EG 4" /8 7-9/ EG 5" 1/2 9-/16 1-1/ EG 6" 1/2 11-5/16 1-1/ EG 8" 1/2 12-7/8 1-1/
5 SWIVEL LOOP HNGER 101 djustable and Hanger for Copper Tubing Size Range: 1/2 through 6 Surface Finish: Copper-colored coating (for identification purposes only) non-insulated copper tubing lines Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) CP 1/2" /8 -/ CP /4" /8-1/ CP 1" /8-1/ CP 1-1/4" /8 -/ CP 1-1/2" /8-5/ CP 2" /8-1/ CP 2-1/2" /8 4-7/ CP " 1/2 5-11/16 1-1/ CP -1/2" 1/2 6-7/16 1-1/ CP 4" 1/2 7-1/8 1-1/ CP 5" 5/8" 9-1/4 1-5/ CP 6" /4" 11-/16 1-9/
6 SWIVEL LOOP HNGER 100FL Felt-lined djustable and Hanger Size Range: 1/2 through 4 non-insulated copper tubing lines to prevent electrolysis Felt lining also acts to reduce noise in pipes Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) FL 1/2" /8" 2-/ FL /4" /8" -1/ FL 1" /8" -5/ FL 1-1/4" /8" -9/ FL 1-1/2" /8" -1/ FL 2" /8" 4-1/ FL 2-1/2" 1/2" 5-5/8 1-1/ FL " 1/2" 6-9/16 1-1/ FL -1/2" 1/2" 7 1-1/ FL 4" 5/8" 7-/4 1-5/ /4-8 1/2-8 2
7 SWIVEL LOOP HNGER 102 PVC Coated djustable and Hanger Size Range: 1/2 through 8 with a vinyl top coat non-insulated pipe lines Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) VC 1/2" /8" -1/ VC /4" /8" -1/ VC 1" /8" -/ VC 1-1/4" /8" -1/ VC 1-1/2" /8" -15/ VC 2" /8" 4-1/ VC 2-1/2" 1/2" 5-5/8 1-1/ VC " 1/2" 6-9/16 1-1/ VC -1/2" 1/2" 7 1-1/ VC 4" 5/8" 7-/4 1-5/ VC 5" 5/8" 9-1/8 1-5/ VC 6" /4" 10-5/8 1-9/ VC 8" 7/8" 1-1/8 1-5/
8 SWIVEL LOOP HNGER 102 PVC Coated djustable and Hanger for Copper Tubing Size Range: 1/2 through 6 Surface Finish: Copper colored coating with a vinyl top coat non-insulated copper tubing lines where it is undesirable to have the steel of the hanger in direct contact with the copper tubing Conforms with Federal Specification WW-H-171 (Type 10), Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 10) VC 1/2" /8" -/ VC /4" /8" -1/ VC 1" /8" -1/ VC 1-1/4" /8" -/ VC 1-1/2" /8" -5/ VC 2" /8" -1/ VC 2-1/2" 1/2" 4-7/ VC " 1/2" 5-11/16 1-1/ VC -1/2" 1/2" 6-7/16 1-1/ VC 4" 1/2" 7-1/8 1-1/ VC 5" 5/8" 9-1/4 1-5/ VC 6" /4" 11-/16 1-9/
9 SWIVEL LOOP HNGER 10 djustable and Hanger with Insulation Shield Size Range: 1-1/2 through 6 low or high temperature piping where crush resistant material is installed at the point of support Protection shield is welded to loop before plating Flared edges on sizes through 4 only For sizes larger than 6 see Model 40 Clevis Hanger Part Nominal C Max. Rec EG 1-1/2" /8" -1/ EG 2" /8 4-1/ EG 2-1/2" 1/2" 5-5/8 1-1/ EG " 1/2" 6-9/16 1-1/ EG -1/2" 1/2" 7 1-1/ EG 4" 5/8" 7-/4 1-5/ EG 5" 5/8" 9-1/8 1-5/ EG 6" /4" 10-5/8 1-9/ C Flared edges on sizes thru 4 only. Insulation not included. 26
10 SWIVEL LOOP HNGER 104 djustable and Hanger for Plastic Pipe Size Range: 1/2 through 4 flexible EPDM or Polypropylene plastic piping Use hanger with V-trough (model VTR) for continuous support of flexible or hot piping services Part Size Nominal Max. Rec. Number No. Pipe Size Load (lbs) EG 1 1/2" /8" 5-7/8 7/ EG 1 /4" /8" 5-7/8 7/ EG 1 1" /8" 5-7/8 7/ EG 1 1-1/4" /8" 5-7/8 7/ EG 1 1-1/2" /8" 5-7/8 7/ EG 1 2" /8" 5-7/8 7/ EG 2 2-1/2" 1/2" 9-1/4 1-1/ EG 2 " 1/2" 9-1/4 1-1/ EG 2-1/2" 1/2" 9-1/4 1-1/ EG 2 4" 1/2" 9-1/4 1-1/8 175 CONTINUOUS SUPPORT VTR V-trough Support for Flexible or Hot Piping Services Used with the model 104 Hanger for continuous support of flexible or hot piping services Part Nominal Size Number Pipe Size VTR# /2 thru 2 #1 VTR# /2 thru 4 #2 #VTR # ' V-TROUGH 27
11 J-HNGER 418 Galvanized J-hanger Size Range: 1/2 through 8 non-insulated pipe lines T-slot hole for bolt head permits disengagement of side bolt without removing the nut (sizes 1/2 thru 4 only) Side hole permits wall mounting (sizes 1/2 thru 4 only) Conforms Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 5) EG 1/2" /8" 9/ EG /4" /8" -/8 9/ EG 1" /8" -11/16 9/ EG 1-1/4" /8" 4-1/2 9/ EG 1-1/2" /8" 4-1/16 9/ EG 2" /8" 5-11/16 9/ EG 2-1/2" 1/2" 6-/4 11/ EG " 1/2" 7-11/16 11/ EG -1/2" 1/2" 8-/8 11/ EG 4" 5/8" 9-/16 1/ EG 5" 5/8" 10 1/ EG 6" /4" 11-5/8 15/ EG 8" /4" 14-1/16 1-1/
12 J-HNGER 418FL Galvanized Felt-lined J-hanger Size Range: 1/2 through 4 non-insulated pipe lines Felt lining also acts to reduce noise in pipes T-slot hole for bolt head permits disengagement of side bolt without removing the nut Side hole permits wall mounting Conforms Manufacturers Standardization Society (MSS) SP-58 and SP-69 (Type 5) FL 1/2" /8" 9/ FL /4" /8" -/8 9/ FL 1" /8" -11/16 9/ FL 1-1/4" /8" 4-1/2 9/ FL 1-1/2" /8" 4-1/16 9/ FL 2" /8" 5-1/16 9/ FL 2-1/2" 1/2" 6-/4 11/ FL " 1/2" 7-11/16 11/ FL -1/2" 1/2" 8-9/16 11/ FL 4" 5/8" 9-/16 1/
HANGERS & SUPPORTS CLIP-IT CLIP-IT STUD STRAPS BAR JOIST CLIP CONDUIT HANGERS CLIP-IT
62 hangers & supports Innovation. It s what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting
safety tieback anchors
ref.: T4750 rev. no.: 2 date: 10/04 page: 1/1 Flexibility Tractel s Swingstage Division has a full range of Safety Tieback Anchors to suit every building and budget; from the standard U-bar model, to more
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual. SLS Locking Device
TECHNICAL HANDBOOK nvent CADDY Speed Link Manual SLS Locking Device Contents 1. WIRE ROPE SUPPORT OVERVIEW 3 A. Using Wire Rope 3 B. The nvent CADDY Speed Link Manual 3 C. SLS Features 4 D. SLS Mechanism
Installation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD
Installation/Care/Use Manual Soft Sides Fountains with FLEXI-GUARD EDFP217C EDFP217RAC Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING
A A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N
Standard Hangers and Adapters
Standard s and Adapters Cable Gripping Tabs Prevent cable slippage without the need for a permanently installed hoisting grip. Pre-Assembled and Captivated Hardware Eliminates the need for field assembly.
Expert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
Livestock Equipment Bale Movers/ Bale Spears. Tractor Linkage. Grade 5 & 8 Hitch Pins. Tractor Linkage
Hooking a piece of equipment to your tractor? Our selection of hitch pins, locking pins, lift arm/top link parts, PTO adapters will keep things connected. Make sure you have an SMV sign to keep everyone
TECHNICAL DATA ZTR Model 312
DIXON INDUSTRIES. INC. A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 0945 316 251 2000 FAX 316 251 4117 TECHNICAL DATA ZTR Model 312 IMPORTANT - READ OPERATOR'S MANUAL BEFORE
Playground Product Specifications
Playground Product Specifications All of the playground equipment we sell is commercial grade and made of the highest quality materials, which meet or exceed required ASTM guidelines, and meet ISO 9001.
Technical Datasheet. Rigid & Retractable Pendants. Rigid Pendant
Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
4-63 T UBE FITTINGS TUBING P OLYURETHANE TUBING SERIES TU P RODUCTS FOR A LIST OF STOCKED PRODUCTS, PLEASE SEE THE CURRENT SMC PRICE LIST S TOCKED
T UBE FITTINGS 4-63 P OLYURETHANE TU Flexible tubing For general industrial air and water applicatons 20m and 100m coils 8 colour option Available in metric size (TU) and inch size (TIUB) CONTACT SMC FOR
1074 Kenran Industrial Dr. St. Louis, MO Phone: Taylortec WV-9A Work Vest
Taylortec WV-9A Work Vest WV-9A U.S.C.G. App# 160.03/9/0 Hammond, LA 70403 USA + 1 98 42 6266 Type V, inherently buoyant, 3 piece fabric covered foam work vest with pocket. 1 work vests per box. Polyethylene
WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
Superstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
Telescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
Flagpole Selection Guide
Selection Guide Selecting the right pole for your project To chose the right pole you should consider both flagpole Style and Height. The common styles are outlined on this page for easy comparison. The
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
TECHNICAL DATA BROCHURE Model 304
DIXON INDUSTRIES, INC. A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 673370945 316 251 2000 FAX 316 251 4117 TECHNICAL DATA BROCHURE Model 304 IMPORTANT - READ OPERATOR'S MANUAL BEFORE
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
MUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
GETZ EQUIPMENT INNOVATORS PART No. 4G59678 CARBON DIOXIDE MINI PUMP FOR EXTINGUISHER SERVICE (Revised )
GETZ EQUIPMENT INNOVATORS PART No. 4G59678 CARBON DIOXIDE MINI PUMP FOR EXTINGUISHER SERVICE (Revised 11-24-10) 2320 Lakecrest Drive, Pekin IL 61554 PH. (888) 747-4389 Fax (309) 495-0625 Website: www.getzequipment.com
Mainz Product Catalogue
2019 Mainz Product Catalogue Stainless steel wire, fittings, hardware and tools for wire balustrades Stainless steel wire Stainless steel hardware and fittings Tools Mainz Pty Ltd Ph: (08) 92756246 www.wirebalustrades.com.au
Pressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
L21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
Banyan Air Service November 18, 2011 AVE Aviation and Commerce Center Building 1 Miami, FL
SECTION 10801 - TOILET AND BATH ACCESSORIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions apply to this Section.
Superstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
Unit 1, Fullerton Road Rotherham S60 1DJ. Tele: Fax:
Unit 1, Fullerton Road Rotherham S60 1DJ Tele: 0845 601 333 6 Fax: 0845 601 333 7 info@fabricatedproducts.co.uk www.fabricatedproducts.co.uk Data Sheet 6.0 Rubber Pump Flexes All rubber bellows are suitable
8MAY15 US RACK, Inc Falcon Drive, Madera, CA
8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following
Halsey Taylor Owners Manual
Halsey Taylor Owners Manual Non-Refrigerated Fountains OVL-EBP OVL-SBP OVL-SEBP OVL-ESBP Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE ITRUCTIO BEFORE STARTING
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile 2.75 GB 2.75 Expert 090311 We reserve the right to continuously improve our products and make
CHANNEL & SUPPORT SYSTEMS
Total Cable Management Solutions CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is
Vertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
13 - Fishing Accessories - Bait Stations
13 - Fishing ccessories - Bait Stations Deluxe Jet Ski Bait Station This universal mount bait station suits all models of jet skis. 316 grade stainless steel frame with 3 x rod holders, handles & mount
Assembly Guide ST200 FUNCTIONAL TRAINER
Assembly Guide ST200 FUNCTIONAL TRAINER Assembly Guide ST200 FUNCTIONAL TRAINER To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before proceeding,
K Page 1 of 48 Air Intake - Pg. 17
K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
Installation and Operating Instructions Bypass Flow Meter DST
Installation and Operating Instructions Bypass Flow Meter DST DST_gb_A4_1.0.doc Version 1.0 1 von 10 Contents 1. Foreword... 3 2. Safety... 3 2.1. Symbol and meaning... 3 2.2. General safety directions
BRONZE BUSHING REPLACEMENT PROCEDURE DN345 & NL450C
1 BRONZE BUSHING REPLACEMENT PROCEDURE V.2 12/3/2014 DN345 & NL450C 2 Safety Instructions Removing Walking Beams 3 1. Position spreader on a flat concrete surface capable of supporting weight of spreader
#59114 Rola 2-Bike Rack Carrier (Shown Assembled) (A) (C) (B)
Use for Parts: #59114 Rola -Bike Rack System #59115 Rola 1-Bike Add-On TOOLS REQUIRED 10mm or 13/3 Socket & Wrench #59114 Rola -Bike Rack Carrier (Shown Assembled) Tray Attachment Hardware: (3) Plastic
A. TO PREPARE THE MACHINE FOR USE.
INSTRUCTION MANUAL FOR THE ML120 STRINGING MACHINE. CONTENTS: A. TO PREPARE THE MACHINE FOR USE. 1. The assembly of frame with console and tooltray. 2. Fixing the lever of the tension unit. 3. Putting
Rail Track. Deck. Figure 3.9 Standard Fitting and Accessories for Single Deck Roof
Rim Seal Gauge Hatch Pontoon Deck Manway Manway Bleeder Vent Support Leg Liquid Deck Roller Ladder Rail Track Drain Sump with isolation Drain Pipe Gauger Platform Figure 3.9 Standard Fitting and Accessories
Series RT Spring Driven Hose Reels Operating Instructions
Series RT Patent No. 7, 150, 425 Series RT Spring Driven Hose Reels Operating Instructions Thank you for purchasing a Reelcraft product. We wish you success in the critical function it will provide you
Site Furnishings 2018 PRODUCT SHEET
Picnic Tables These durable perforated steel picnic tables in a range of sizes, shapes, and styles provide a place for family, friends, and little ones to dine, socialize, or just relax. If you're looking
BARRIER OFFSET 0" A 6" 6" A 12" 12" A 26" A 26" 3A OR 4A L OR S * ** L OR S L OR S
ACCEPTABLE (TCB) TYPES AND ANCHORING DETAILS BASED ON UNDERLYING SURFACE TYPE AND BARRIER OFFSET FROM DROP-OFF BARRIER OFFSET UNDERLYING SURFACE 0" A 6" 6" A 12" 12" A 26" A 26" TCB TYPE DETAIL TCB TYPE
These products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have
TRAVSMART permanent single-cable horizontal lifeline system
The Travsmart single-line system provides a smooth travel. It allows the traveler to move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user s hands remain
VERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
NHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed
Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
Lineman Buckets & Accessories
F o r P Lineman Buckets & Accessories r o f e s s i o n a l s. Klein lineman buckets and accessories have been trusted and recognized for decades for their durability and dependability and are built for
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
THREADED ROD & ACCESSORIES. Superior strength, maximum versatility.
Superior strength, maximum versatility. GRTRBRO 12/2013 Threaded rod is used for general purpose fastening and installation. Used in any place that a long bolt is required, threaded rod can be cut to the
INSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
OTHER HOSES. Lances + Fittings. Hose, Hose Reels, TCF SPIRABEL MD SF SUCTION HOSE TUBCLAIR TRICOFUEL T TAPE LAY FLAT TRESS NOBEL RHS EVERFLOW.
TCF Meter 54S06-50 6mm ( /4") 50 0.9 54S08-25 8mm ( 5 /6") 25.02 54S0-25 0mm ( 3 /8") 25.22 54S2-25 2mm ( /2") 25.69 54S9-25 9mm ( 3 /4") 25 2.90 SPIRABEL MD SF SUCTION HOSE Coil 56M25-30 25mm (") 30 56M32-30
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
BERMAD Waterworks. Combination Air Valve. Air Valves Series. Typical Applications. Features & Benefits. Additional Features.
BERMA Waterworks Combination Air Valve Model C7 BERMA C7 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows
Team Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
BUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
Pressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
Ramp Hand-railing System. Complies with Building Regulations. Lockinex. ea i, ea u i
Ramp Hand-railing System Complies with Building Regulations Lockinex ea i, ea u i INTRODUCTION COMPOSITION, MANUFACTURE Handrails to ramps must comply to current building regulations. The Lockinex system
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Galvanized Rigid Conduit
Galvanized Rigid Conduit Conforms To: C80.1 - UL 6 ANSI C-80.1 UL Min. WGT. Per 100 Feet in LBS. INCL. CP. O.D. I.D. Thickness Threads Per Inch Feet Per Lift Color Code Thread Protector 1/2" 79.840.632.104
Nominal O.D. SERIES 110FW. 64mm 89mm 114mm 168mm 222mm 276mm 330mm 391mm 445mm 498mm 552mm
(DN25) 1.5" (DN40) (DN100) (DN150) (DN200) (DN250) (DN300) 1 (DN350) (DN400) 1 (DN450) (DN500) 2 (DN600) 3 (DN900) 4 (DN1200) 5 (DN1350) O.D. 2.50" 10.8 15.3 43.3 64mm 1 C 2 2 2 L Minimum L 0.7 1.0 1.3
SECTION 7 RELIEF VALVES, FLOAT VALVES & ACCESS., AIR VOLUME CONTROLS, FLOW CONTROLS
Telephone: -59-595-4444 - Toll Free: -800-56-364 Fax: -59-595-4380 - www.boshart.com SECTION 7 RELIEF VALVES, FLOAT VALVES & ACCESS., AIR VOLUME CONTROLS, FLOW CONTROLS PRODUCT LINE PAGE Relief Valves......................................................................................
Differential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
FULL HEX RIVET NUT INSERT
Fastening Systems Engineered For Performance FULL HEX RIVET NUT INSERT THE NEW STANDARD IN RIVET NUTS AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES AND BENEFITS Proven to meet Class 8
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
Foundation Products. Poured In Ground Anchor Bolts E1 - E4. Structural Foundations E5 - E12. Copyright 2016 s Industry Inc. SIE-RA-CMP EN
Foundation Products Poured In Ground Anchor Bolts E1 - E4 Structural Foundations E5 - E12 EA EB Poured in Ground Anchor Bolts Layout SIEMENS Anchor Bolts 131702-4X shown for reference purposes only! Actual
24 HOUR CUSTOMER SERVICE
24 HOUR ER SERVICE (888) 464-4821 fax (410) 628-6557 sales@rollingdoorsinc.com WEATHER SEAL PRODUCTS Most of the items in this catalog ship in one day. (888) 464-4821 Fax (410) 628-6557 sales@rollingdoorsinc.com
Falcon 3 145, 170, 195 and Tandem Owner / Service Manual
Falcon 3 145, 170, 195 and Tandem Owner / Service Manual January 2007 - Second Edition Removing The Sail From The Airframe And Short Packing The Glider Many maintenance and repair procedures will require
Materials : Electro galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications : Absorb vibrations and noises
FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
MAKE BOLLARD IMPACT RESISTANT PROTECT FOUNDATIONS RE-USE BOLLARD
\\ PROTECT FOUNDATIONS In-ground or surface mount Impact Recovery System protects foundations from damage when bollards are impacted, need replacing or upgrading. Surface mount version uses Impact resistant
HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION
901020 - HEAVY DUTY H.S. DISCUS CAGE NET POLE NET POLE INSTALLATION www.gillathletics.com 800-637-3090 Install the pipe cap (PCAP00158002) at the top of the net pole. Install net pole pulley (73210042)
SECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST
MODEL SWH10 1,000 LB CAPACITY SWIVEL HOIST PARTS BREAKDOWN AND OPERATING MANUAL Copyright 2007, Arcan Professional Tools Rev: 05/15/07 This operating manual contains important safety information. Read
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
ELADOS EDP L Diaphragm Metering Pump Type
ELADOS EDP L Diaphragm Metering Pump Type 04800-06700 Motor-driven diaphragm pump with integrated frequency converter High reserves due to a powerful asynchronous motor High flexibility due to variably
ULTIMATE 12 RUDDER INSTALLATION INSTRUCTIONS
ULTIMATE 12 RUDDER INSTALLATION INSTRUCTIONS TOOLS NEEDED: DRILL ¼ DRILL BIT ¾ HOLE SAW 3/16 DRILL BIT PHILLIPS HEAD SCREWDRIVER 7/16 WRENCH HEAT SOURCE: PROPANE TORCH, LIGHTER OR HOT AIR GUN WIRE CUTTER
Auto-Rewind Hose Reels INSTRUCTION MANUAL FOR OXY-LPG MODEL
Auto-Rewind Hose Reels INSTRUCTION MANUAL FOR OXY-LPG MODEL Introduction Thank you for purchasing a Retracta Auto Rewind Hose Reel. The Retracta range of hose reels are a breakthrough in industrial quality
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
Section 3- Repair and Calibration Procedures
Section 3- Repair and Calibration Procedures 1. Refrigerant Removal Procedures 2. Scale/PC Board Recalibration Procedure 3. PC Board Configuration Procedure of AR400 4. Scale Tare Procedure 5. Gauge Calibration
New Product. featuring an exclusive dual directional head* Innovative Fastening Technologies. From the makers of. * Patent-pending design.
Innovative Fastening Technologies New Product featuring an exclusive dual directional head* Light-Gauge * Patent-pending design Wood From the makers of Concrete High Performance in Threaded Anchoring The
OPERATIONS/PARTS MANUAL FOR PATTERSON'S MODEL # WWP40M-LPS-6 LOW-PROFILE BARGE CONNECTOR WINCH
W. W. Patterson Company 3 Riversea Road Pittsburgh, PA 15233 Phone: 800-322-2018 FAX: 412-322-2785 OPERATIONS/PARTS MANUAL FOR PATTERSON'S MODEL # WWP40M-LPS-6 LOW-PROFILE BARGE CONNECTOR WINCH Please
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose...
INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN
INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l
Tread Brake Assembly Instructions
reated: 9/06/202, Revision: 2/20/204 Tread rake ssembly Instructions Table of ontents: Lower rake omponents..2-4 able rake ssembly: rake Handle omponents..5-7 able ssembly....8 Tee Handle rake ssembly...9-0
SWIRLFLO Refrigerated fountains with FLEXI-GUARD
TM INSTALLATION, CARE & USE MANUAL SWIRLFLO Refrigerated fountains with FLEXI-GUARD TM INSTALLER! CAUTION: Review these instructions before beginning installation. Be sure that installation conforms to
LIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)
LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
TABLE OF CONTENTS. Throughout the catalog you will notice blue highlighted items. These are the most frequently ordered BURNDY Products.
BURNDY Products Hardware TABLE OF CONTENTS DURIUM Hardware Bolts............................ D-2 Nuts............................. D-3 Flat Washer....................... D-3 Split Lockwasher...................