Homework (Moodle Submission by 1/13) Set 1 - Chapter 10 1, 2, 3, 5, 6, 7, 25, 26, 27, 28, 52, 53, 56, 57
|
|
|
- Diane Fox
- 5 years ago
- Views:
Transcription
1 Homework (Moodle Submission by 1/13) Set 1 - Chapter 10 1, 2, 3, 5, 6, 7, 25, 26, 27, 28, 52, 53, 56, 57 Set 2 - Chapter 10 60, 63, 67, 70, 76, 79, 81, 83, 84, 85, 90, 93
2 1.Refer to Example Problem 1 to solve the following problem. a.if the hockey player exerted twice as much force, 9.00 N, on the puck, how would the puck s change in kinetic energy be affected? b.if the player exerted a 9.00-N force, but the stick was in contact with the puck for only half the distance, m, what would be the change in kinetic energy? 2. Together, two students exert a force of 825 N in pushing a car a distance of 35 m. a.how much work do the students do on the car? b.if the force was doubled, how much work would they do pushing the car the same distance? 3. A rock climber wears a 7.5-kg backpack while scaling a cliff. After 30.0 min, the climber is 8.2 m above the starting point. a.how much work does the climber do on the backpack? b.if the climber weighs 645 N, how much work does she do lifting herself and the backpack? c.what is the change in the climber s energy? 5. Two people lift a heavy box a distance of 15 m. They use ropes, each of which makes an angle of 15 with the vertical. Each person exerts a force of 225 N. How much work do they do? 6. An airplane passenger carries a 215-N suitcase up the stairs, a displacement of 4.20 m vertically, and 4.60 m horizontally. a.how much work does the passenger do? b.the same passenger carries the same suitcase back down the same set of stairs. How much work does the passenger do now? 7. A rope is used to pull a metal box a distance of 15.0 m across the floor. The rope is held at an angle of 46.0 with the floor, and a force of 628 N is applied to the rope. How much work does the force on the rope do? 25. A sledgehammer is used to drive a wedge into a log to split it. When the wedge is driven 0.20 m into the log, the log is separated a distance of 5.0 cm. A force of 1.7x10 4 N is needed to split the log, and the sledgehammer exerts a force of 1.1x10 4 N. a.what is the IMA of the wedge? b.what is the AMA of the wedge? c.calculate the efficiency of the wedge as a machine.
3 26.A worker uses a pulley system to raise a 24.0-kg carton16.5 m, as shown in Figure A force of 129 N is exerted, and the rope is pulled 33.0 m. a.what is the AMA of the pulley system? b.what is the efficiency of the system? 33.0 m 24.0 kg 129 N 16.5 m Figure You exert a force of 225 N on a lever to raise a 1250 N rock a distance of 13 cm. If the efficiency of the lever is 88.7 percent, how far did you move your end of the lever? 28. A winch has a crank with a 45-cm radius. A rope is wrapped around a drum with a 7.5-cm radius. One revolution of the crank turns the drum one revolution. a. What is the ideal mechanical advantage of this machine? b. If, due to friction, the machine is only 75 percent efficient, how much force would have to be exerted on the handle of the crank to exert 750 N of force on the rope? 52. The third floor of a house is 8 m above street level.how much work is needed to move a 150-kg refrigerator to the third floor? 53. Haloke does 176 J of work lifting himself m. What is Haloke s mass? 56. To keep a car traveling at a constant velocity, a 551-N force is needed to balance frictional forces. How much work is done against friction by the car as it travels from Columbus to Cincinnati, a distance of 161 km? 57. A cyclist exerts a force of 15.0 N as he rides a bike 251 m in 30.0 s. How much power does the cyclist develop?
4 60. A wagon is pulled by a force of 38.0 N exerted on the handle at an angle of 42.0 with the horizontal. If the wagon is pulled in a circle of radius 25.0 m, how much work is done? 63. A 120-kg lawn tractor, shown in Figure 10-17,goes up a 21 incline that is 12.0 m long in 2.5 s. Calculate the power that is developed by the tractor kg 12.0 m 21 Figure Sau-Lan has a mass of 52 kg. She rides up the escalator at Ocean Park in Hong Kong. This is the world s longest escalator, with a length of 227 m and an average inclination of 31. How much work does the escalator do on Sau-Lan? 70. Maricruz slides a 60.0-kg crate up an inclined ramp that is 2.0-m long and attached to a platform 1.0 m above floor level, as shown. A N force, parallel to the ramp, is needed to to the platform? slide the crate up the ramp at a constant speed. a.how much work does Maricruz do in sliding the crate up the ramp? b.how much work would be done if Maricruz 1.0 m simply lifted the crate straight up from the floor to the platform? N 60.0 kg 2.0 m Figure A 12.0-m-long conveyor belt, inclined at 30.0, is used to transport bundles of newspapers from the mail room up to the cargo bay to be loaded onto delivery trucks. Each newspaper has a mass of 1.0 kg, and there are 25 newspapers per bundle. Determine the power that the conveyor develops if it delivers 15 bundles per minute.
5 79. Takeshi raises a 1200-N piano a distance of 5.00 m using a set of pulleys. He pulls in 20.0 m of rope. a.how much effort force would Takeshi apply if this were an ideal machine? b.what force is used to balance the friction force if the actual effort is 340 N? c.what is the output work? d.what is the input work? e.what is the mechanical advantage? 81. A pulley system lifts a 1345-N weight a distance of m. Paul pulls the rope a distance of 3.90 m, exerting a force of 375 N. a.what is the ideal mechanical advantage of the system? b.what is the mechanical advantage? c.how efficient is the system? 83. A student exerts a force of 250 N on a lever, through a distance of 1.6 m, as he lifts a 150-kg crate. If the efficiency of the lever is 90.0 percent, how far is the crate lifted? 84. What work is required to lift a 215-kg mass a distance of 5.65 m, using a machine that is 72.5 percent efficient? 85.The ramp in Figure is 18 m long and 4.5 m high. a. What force, parallel to the ramp (FA), is required to slide a 25-kg box at constant speed to the top of the ramp if friction is disregarded? b. What is the IMAof the ramp? c. What are the real MAand the efficiency of the ramp if a parallel force of 75 N is actually required? 90.Brutus, a champion weightlifter, raises 240 kg of weights a distance of 2.35 m. a.how much work is done by Brutus lifting the weights? b.how much work is done by Brutus holding the weights above his head? c.how much work is done by Brutus lowering them back to the ground? d.does Brutus do work if he lets go of the weights and they fall back to the ground? e.if Brutus completes the lift in 2.5 s, how much power is developed? 93.Sally does 11.4 kj of work dragging a wooden crate 25.0 m across a floor at a constant speed. The rope makes an angle of 48.0 with the horizontal. a. How much force does the rope exert on the crate? b. What is the force of friction acting on the crate? c. What work is done by the floor through the force of friction between the floor and the crate?
Ch06 Work and Energy.notebook November 10, 2017
Work and Energy 1 Work and Energy Force = push or pull Work = force*distance (//) Technically: Work = force*distance*cos θ 2 Sample 1: How much work is done lifting a 5 N weight 3m vertically? 3 Work is
Assignment 1 Unit 3 Work, Power, Efficiency, and Potential Energy Name: Multiple Choice. Show workings where necessary.
Assignment 1 Unit 3 Work, Power, Efficiency, and Potential Energy Name: Multiple Choice. Show workings where necessary. 1. In which situation is work not done? A) a frozen turkey is carried upstairs B)
Simple Machines Problem Set. 2. What does it mean to say that a machine has a certain mechanical advantage?
Simple Machines Problem Set 1. In what two ways can a machine alter an input force? 2. What does it mean to say that a machine has a certain mechanical advantage? 3. Distinguish between ideal mechanical
6. What net external force is required to give a 25 kg suitcase an acceleration of 2.2 m/s2 to the right? Draw a free-body diagram of the suitcase.
HONORS PHYSICS PROBLEM SET NEWTON S LAWS & FORCES ONE DIMENSIONAL FORCES 1. The net external force on the propeller of a 0.75 kg model airplane is 17 N forward. What is the acceleration of the airplane?
Name: Date Due: Simple Machines. Physical Science Chapter 4
Date Due: Simple Machines Physical Science Chapter 4 1 Work & Power 1. Define the following terms: a. work= b. joule= c. power= d. watt= e. horsepower= 2. When does a force do work? 3. If there is no movement,
Calculate the average acceleration during the 4.6 s time interval. Give your answer to an appropriate number of significant figures.
Q1.The diagram below shows an electric two-wheeled vehicle and driver. (a) The vehicle accelerates horizontally from rest to 27.8 m s 1 in a time of 4.6 s. The mass of the vehicle is 360 kg and the rider
Name: SOLUTIONS MIDTERM 2, Spring 2019
Name: SOLUTIONS MIDTERM 2, Spring 2019 Solutions in bold. Print your name clearly above, and write and bubble in your student 800 number on the provided scantron. There are 20 equally-weighted problems
5. A bead slides on a curved wire, starting from rest at point A in the figure below. If the wire is frictionless, find each of the following.
Name: Work and Energy Problems Date: 1. A 2150 kg car moves down a level highway under the actions of two forces: a 1010 N forward force exerted on the drive wheels by the road and a 960 N resistive force.
Chapter 6. You lift a 10 N physics book up in the air a distance of 1 meter at a constant velocity of 0.5 m/s. The work done by gravity is
I lift a barbell with a mass of 50 kg up a distance of 0.70 m. Then I let the barbell come back down to where I started. How much net work did I do on the barbell? A) - 340 J B) 0 J C) + 35 J D) + 340
PHYSICS REVIEW SHEET 2010 MID-TERM EXAM
PHYSICS REVIEW SHEET 2010 MID-TERM EXAM Concepts And Definitions Definitions of fact, hypothesis, law, theory Explain the scientific method Difference between average and instantaneous speed and speed
DATA EQUATIONS MATH ANSWER
HCP PHYSICS REVIEW SHEET MID TERM EXAM Concepts And Definitions 1. Definitions of fact, hypothesis, law, theory 2. Explain the scientific method 3. Difference between average and instantaneous speed and
Unit Conversion Worksheet
Name: Period Date: Unit Conversion Worksheet Conversions 1 hour = 3600 seconds 1 mile = 5280 feet 1 yard = 3 feet 1 meter = 3.28 feet 1 km = 0.62 miles 1 light second = 300,000,000 meters 1 kg = 2.2 lbs
Exam 3 Phys Fall 2002 Version A. Name ID Section
Closed book exam - Calculators are allowed. Only the official formula sheet downloaded from the course web page can be used. You are allowed to write notes on the back of the formula sheet. Use the scantron
Simple Machine Quiz Study Guide. Moving something with a force, or when a force is applied through a distance or energy transfer through motion.
Name: Work- Simple Machine Quiz Study Guide 1.) What is one of the definitions for work? Moving something with a force, or when a force is applied through a distance or energy transfer through motion.
Physics 8, Fall 2017, Homework #5. Due at start of class on Friday, October 13, 2017
Physics 8, Fall 2017, Homework #5. Due at start of class on Friday, October 13, 2017 Problems marked with (*) must include your own drawing or graph representing the problem and at least one complete sentence
Here is a summary of what you will learn in this section:
Mechanical Advantage Here is a summary of what you will learn in this section: A m achine is a mechanical system that reduces the force required to accomplish work. Machines m ake work easier by increasing
Simple Machines. Work (in) = Work (out)
Simple Machines Work (in) A simple machine uses a force to do work against a single load force. Ignoring friction losses, the work done on the load is equal to the work done by force Work (out) Work (in)
A) Draw the levers in your notes and use the drawings to record your results.
Simple Machines Station One 1 st Class Levers This station should have 2 levers set up. One where the fulcrum is @.5m and one where it is @.65m. Don t change them in any way! You should also have Newton
POTENTIAL ENERGY AND ENERGY CONSERVATION
POTENTIAL ENERGY AND ENERGY CONSERVATION 1. Sky Jump: You have landed a summer job with a company that has been given the contract to design the ski jump for the next Winter Olympics. The track is coated
Appendix : Categorization Task. Instructions
Appendix : Categorization Task Instructions Your task is to group the 25 problems below based upon similarity of solution into various groups on the sheet of paper provided. Problems that you consider
Copyright 2014 Edmentum - All rights reserved.
Copyright 2014 Edmentum - All rights reserved. AP Physics Blizzard Bag 2014-2015 Classical Mechanics 1. A block of mass 4.0 kg is attached to the end of a spring. The spring stiffness constant is 25 N/m.
AP Physics 1 Lesson 4 Homework Outcomes Quiz 4 Preparation. Name. Date. Period
Physics 1 Lesson 4 Homework Outcomes Quiz 4 Preparation Name Date Period Practice Problems I. A continuous force of 2.0 N is exerted on a 2.0 kg block to the right. The block moves with a constant horizontal
REVIEW : KINEMATICS
1 REVIEW 5-4-16: KINEMATICS Kinematics-Defining Motion 1 A student on her way to school walks four blocks east, three blocks north, and another four blocks east, as shown in the diagram. Compared to the
DYNAMICS PROBLEM SOLVING
DYNAMICS PROBLEM SOLVING 1. An elevator of mass 800 kg accelerates at 3.0 m/s 2 [down]. What force does the cable exert on the elevator? (5400 N) 2. The engine of a train has a mass of 5.0 x 10 4 kg. It
All Work and no Play. Is that work? Work, work, work. You might head off to your job one day, sit at a computer, and type away at the keys.
All Work and no Play Work, work, work. You might head off to your job one day, sit at a computer, and type away at the keys. Is that work? To a physicist, only parts of it are. Work is done when a force
1. Find the potential energy of 20 Kg mass child sitting on a roof 10 m above the ground.
LECTURE_8 Name: ID: DATE: 22/04/2015 101 PHYS ASSIGNMENT 1. Find the potential energy of 20 Kg mass child sitting on a roof 10 m above the ground. 2. A women is pulling a box of 20 Kg mass on a horizontal
Mechanical Energy I. Name: Date: Section C D F. Mr. Alex Rawson Physics
Name: Date: Section C D F Mechanical Energy I Mr. Alex Rawson Physics 1. One of the two Olympic weightlifting events is called the Clean and Jerk, shown below. As of Athens 2004, the record for Clean and
Physics P201 D. Baxter/R. Heinz
Seat # Physics P201 D. Baxter/R. Heinz EXAM #1 September 26, 2002 7:00 9:00 PM INSTRUCTIONS 1. Sit in SEAT # given above. 2. DO NOT OPEN THE EXAM UNTIL YOU ARE TOLD TO DO SO. 3. Print your name (last name
Mechanical Advantage 1
Mechanical Advantage 1 Mechanical Advantage Another Word for Leverage Ways of Making WORK easier or more efficient. 2 Work = Work * = Work = * * * 3 Mechanical Advantage Output Input 5 8 N = 1 4 5 8 N
All work on this packet is my own. I have not done anything to give myself or anyone else an unfair advantage on this assignment.
AP Physics Summer Packet Name: Period: All work on this packet is my own. I have not done anything to give myself or anyone else an unfair advantage on this assignment. Signature: I care significantly
Review Problems for Physics A Final
Review Problems for Physics A Final 1. The fastest helicopter, the Westland Lynx, can travel 3.33 km in the forward direction in just 30.0 s.what is the average velocity of this helicopter? Express your
EF 151 Exam #2 - Spring, 2016 Page 1 of 6
EF 151 Exam #2 - Spring, 2016 Page 1 of 6 Name: Section: Instructions: Sit in assigned seat; failure to sit in assigned seat results in a 0 for the exam. Put name and section on your exam. Put seating
Motion, Forces, and Energy Revision (Chapters 3+4)
Motion, Forces, and Energy Revision (Chapters 3+4) What is force? The force exerted on a surface divided by the total area over which the force is exerted. What is the link between pressure & area? Pressure
I hope you earn one Thanks.
A 0 kg sled slides down a 30 hill after receiving a tiny shove (only enough to overcome static friction, not enough to give significant initial velocity, assume v o =0). A) If there is friction of µ k
AP Physics B Fall Final Exam Review
Name: Date: AP Physics B Fall Final Exam Review 1. The first 10 meters of a 100-meter dash are covered in 2 seconds by a sprinter who starts from rest and accelerates with a constant acceleration. The
PHYS 101 Previous Exam Problems
PHYS 101 Previous Exam Problems CHAPTER 14 Fluids Fluids at rest pressure vs. depth Pascal s principle Archimedes s principle Buoynat forces Fluids in motion: Continuity & Bernoulli equations 1. How deep
Ramp B is steeper than Ramp A. Less force is needed to push boxes up Ramp A. However, you have to move the boxes over a greater distance.
What is a simple machine? Would you say this bicycle is a simple machine? It is certainly simpler than a car, but it does not fit the scientific definition of simple machine. A simple machine is a device
TEKS Lesson 6.8E: Machines
6.8E Investigate how inclined planes and pulleys can be used to change the amount of force to move an object. : Machines What is a machine? A machine is a device that allows you to do work in a way that
Honors Physics Semester 2 Final Exam Review
Honors Physics Semester 2 Final Exam Review 1600 kg 800 kg 9 m/s A truck with mass 1600 kg collides with a car with mass 800 kg at rest. They stick together and continue to move to the right. 1. What is
Homework #10 Due Monday, May Compute the moment of inertia of the objects below.
Homework #10 Due Monday, May 1. Compute the moment of inertia of the objects below. θ (a) Compute the moment of inertia of a thin rod of mass M and length R for rotations about its end. Explain why your
Page 2. Indicate with ticks ( ) in the table below which of the quantities are vectors and which are scalars. Velocity Speed Distance Displacement
Q1.(a) Indicate with ticks ( ) in the table below which of the quantities are vectors and which are scalars. Velocity Speed Distance Displacement vector scalar (b) A tennis ball is thrown vertically downwards
3) A horse gallops a distance of 10 kilometers in a time of 30 minutes. Its average speed is A) 15 km/h. B) 20 km/h. C) 30 km/h. D) 40 km/h.
Physics Keller Midterm exam review The midterm exam will be seventy questions selected from the following. The questions will be changed slightly, but will remain essentially the same. 1) A truck is moving
Regents Exam Practice: Measurement, Kinematics, Free Fall, PJM, and UCM
Regents Exam Practice: Measurement, Kinematics, Free Fall, PJM, and UCM 1. Which quantity and unit are correctly paired? 2. Which is a derived unit? meter second kilogram Newton 3. The fundamental unit
NEWTON S LAWS OF MOTION
NEWTON S LAWS OF MOTION Force The ability to cause a change in a state of motion of an object (Vector) The only thing that can cause an object to accelerate is a Force An object at rest will remain at
MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Hang from a pair of gym rings and the upward support forces of the rings will always
Simple Machines. Chana Goodman, Doral Academy Preparatory School, based on a PowerPoint by M. Hunter
Simple Machines Chana Goodman, Doral Academy Preparatory School, 2011-2012 based on a PowerPoint by M. Hunter Essential Question How can mechanical advantage be calculated, and used to predict effort and
Circular Motion - Horizontal
Circular Motion - Horizontal Outcome(s): explain and apply the concepts of centripetal acceleration and centripetal force, as applied to uniform horizontal circular motion. A bucket being swung around
Physics 2204 Review for test 3 Vectors and The first four sections of Unit 2
Physics 2204 Review for test 3 Vectors and The first four sections of Unit 2 1 You set out in a canoe from the east shore of a south-flowing river. To maximize your velocity relative to the shore you should
Names: School: 2002 UTAH SCIENCE OLYMPIAD - PHYSICS LAB SIMPLE MACHINES 1 - PART 1
Names: School: 2002 UTAH SCIENCE OLYMPIAD - PHYSICS LAB SIMPLE MACHINES 1 - PART 1 There are two parts to the SIMPLE MACHINES 1 competition. Both parts must be completed within a time of 12 minutes. Masses:
Calculus 12: Evaluation 3 Outline and Review
Calculus 12: Evaluation 3 Outline and Review You should be able to: 1. Differentiate various types of functions including trigonometric, exponential and logarithmic functions, 2. Solve various related
Kinematics-Projectiles
1. A volleyball hit into the air has an initial speed of 10 meters per second. Which vector best represents the angle above the horizontal that the ball should be hit to remain in the air for the greatest
PHYSICS 12 NAME: Kinematics and Projectiles Review
NAME: Kinematics and Projectiles Review (1-3) A ball is thrown into the air, following the path shown in the diagram. At 1, the ball has just left the thrower s hand. At 5, the ball is at its original
Work and Machines. Work occurs when a force causes an object to move in the direction of the force.
Work and Machines Work occurs when a force causes an object to move in the direction of the force. You just finished reading and summarizing an entire chapter in your science textbook. In the scientific
Level 3 Cambridge Technical in Engineering 05822/05823/05824/05825/05873 Unit 3: Principles of mechanical engineering
Level 3 Cambridge Technical in Engineering 05822/05823/05824/05825/05873 Unit 3: Principles of mechanical engineering Monday 16 January 2017 Afternoon Time allowed: 1 hour 30 minutes You must have: the
PYP 001 First Major Exam Code: Term: 161 Thursday, October 27, 2016 Page: 1
Term: 161 Thursday, October 27, 2016 Page: 1 *Read the following (20) questions and choose the best answer: 1 The motion of a swimmer during 30.0 minutes workout is represented by the graph below. What
Biomechanics Sample Problems
Biomechanics Sample Problems Forces 1) A 90 kg ice hockey player collides head on with an 80 kg ice hockey player. If the first person exerts a force of 450 N on the second player, how much force does
UNIT D: MECHANICAL SYSTEMS
UNIT D: MECHANICAL SYSTEMS SCIENCE 8 SCIENCE 8 UNIT D SECTION 1.0 1 MACHINES ARE TOOLS THAT HELP HUMANS DO WORK. SECTION 1.0 SCIENCE 8 UNIT D SECTION 1.0 2 1 SIMPLE MACHINES MEETING HUMAN NEEDS TOPIC 1.1
The diagram below represents the path of a stunt car that is driven off a cliff, neglecting friction.
1. A baseball is thrown at an angle of 40.0 above the horizontal. The horizontal component of the baseball s initial velocity is 12.0 meters per second. What is the magnitude of the ball s initial velocity?
Prelab for the Ballistic Pendulum
Ballistic Pendulum 1 Prelab for the Ballistic Pendulum 1. Write the general horizontal and vertical motion Kinematics equations for a horizontally launched projectile. 2. Write the relevant Conservation
BROCK UNIVERSITY. Name: Student #: Page 1 of 12
Name: Student #: BROCK UNIVERSITY Page 1 of 12 Final Exam: July 2016 Number of pages: 12 (+ formula sheet) Course: PHYS 1P21/1P91 Number of students: 104 Examination date: 9 July 2016 Number of hours:
Friction occurs when surfaces slide against each other.
Chapter 12, Section 2 Key Concept: Friction is a force that opposes motion. BEFORE, you learned Gravity is the attractive force masses exert on each other Gravity increases with greater mass and decreases
Types of Forces. Pressure Buoyant Force Friction Normal Force
Types of Forces Pressure Buoyant Force Friction Normal Force Pressure Ratio of Force Per Unit Area p = F A P = N/m 2 = 1 pascal (very small) P= lbs/in 2 = psi = pounds per square inch Example: Snow Shoes
Unit conversions: 9. An defensive lineman weighs 330 pounds. What is his mass in kg (given 2.2 pounds = 1 kg)? 330 lb 1 kg. 2.2 lb 10.
Practice exam semester 1 physics Walk this Way Activity, Graph Sketching and Recognition, Sonic Ranger Lab: Use the graph to the right for q s 1-3 1. Which object(s) is (are) not moving? 2. Which change
Kinematics Review. What distance did the object travel in moving from point A to point B? A) 2.5 m B) 10. m C) 20. m D) 100 m
Kinematics Review 1. Base your answer to the following question on the diagram below which represents a 10-kilogram object at rest at point A. The object accelerates uniformly from point A to point B in
Instructor: Biswas/Ihas/Whiting PHYSICS DEPARTMENT PHY 2053 Exam 1, 120 minutes October 14, 2009
Instructor: Biswas/Ihas/Whiting PHYSICS DEPARTMENT PHY 2053 Exam 1, 120 minutes October 14, 2009 Name (print, last first): Signature: On my honor, I have neither given nor received unauthorized aid on
ì<(sk$m)=bdiebi< +^-Ä-U-Ä-U
Physical Science by Ann J. Jacobs Genre Comprehension Skill Text Features Science Content Nonfiction Summarize Captions Chart Glossary Forces in Motion Scott Foresman Science 3.12 ì
PHYSICS 218 EXAM 3 Monday, November 19, 2007
PHYSICS 218 EXAM 3 Monday, November 19, 2007 NAME: SECTION: 525 526 527 528 529 530 531 532 Note: 525 Recitation Thurs 2:20 529 Recitation Tues 9:35 526 Recitation Thurs 3:55 530 Recitation Tues 12:45
PHYSICS 20 Vectors and Dynamics
NEWTONS 1st LAW 1. A 10.00 kg mass is tied to a string with a maximum strength of 100 N. A second string of equal strength is tied to the bottom of the mass. a) If the bottom string is pulled with a jerk
An introduction to Rigging for Trail Work
An introduction to Rigging for Trail Work Give me a lever long enough and a prop strong enough, I can single handed move the world. Archimedes The purpose of this seminar is to provide a hands-on introduction
Slide 1 / What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3?
Slide 1 / 68 1 What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3? Slide 2 / 68 2 What is the mass of a rectangular shaped ice block with dimensions of 0.04m x 0.05m
NAME:... SCHOOL: FORCE INSTRUCTIONS TO CANDIDATES. Answer ALL questions in this paper in the spaces provided.
NAME:.... SCHOOL: DATE:... FORCE INSTRUCTIONS TO CANDIDATES Answer ALL questions in this paper in the spaces provided. 1. Sally pulls a sledge in the snow. friction F (a) (i) Draw an arrow on the rope
MECHANICS: VECTORS QUESTIONS. Janet s car and springs (2015;3)
MECHANICS: VECTORS QUESTIONS Janet s car and springs (2015;3) Janet arrives home. She parks the car on a slope that is at 12 to the horizontal, as shown in the diagram Draw labelled arrows to show the
Recognise that some mechanisms, including levers, pulleys and gears, allow a smaller force to have a greater effect
MODULE 7 FEEL THE FORCE Key vocabulary: lever, pivot, push, pull, mechanism, machine, force, fulcrum LESSON 8: HOW CAN WE USE LEVERS TO HELP US? LESSON SUMMARY: This lesson introduces mechanisms devices
TWO DIMENSIONAL KINEMATICS
PHYSICS HOMEWORK #11 TWO DIMENSIONAL [Remember that ALL vectors must be described by BOTH magnitude and direction!] 1. You walk 250. steps North and then 400. steps East. What is your displacement? (Distance
- a set of known masses, - four weight hangers, - tape - a fulcrum upon which the meter stick can be mounted and pivoted - string - stopwatch
1. In the laboratory, you are asked to determine the mass of a meter stick without using a scale of any kind. In addition to the meter stick, you may use any or all of the following equipment: - a set
Physics Final Exam Review Fall 2013
Physics Final Exam Review Fall 2013 The lines on the graph represent displacement vectors for the route along which a person moves. Use the figure to answer problems 1 2. 1. What is the total distance
Activity 3: Pulleys. Background
Activity 3: Pulleys Background Pulleys are simple machines that consist of a grooved wheel that turns around a fixed point, similar to the fulcrum of a lever. A rope, cord, or chain runs along the groove
1. downward 3. westward 2. upward 4. eastward
projectile review 1 Name 11-DEC-03 1. A baseball player throws a ball horizontally. Which statement best describes the ball's motion after it is thrown? [Neglect the effect of friction.] 1. Its vertical
Exam Unit 5: Motion and Forces
Exam Unit 5: Motion and Forces 1. Aleshia is moving forward at constant speed of 2 m/s. Which statement correctly describes Aleshia s movement? A. Her speed is increasing by 2 m/s every second. B. She
TEACHER ANSWER KEY December 10, Projectile Review 1
Projectile Review 1 TEACHER ANSWER KEY December 10, 2004 4 1. A baseball player throws a ball horizontally. Which statement best describes the ball's motion after it is thrown? [Neglect the effect of friction.]
1 A Mangonel is a type of catapult used to launch projectiles such as rocks. A student made a working model of a Mangonel. crossbar. bucket.
1 A Mangonel is a type of catapult used to launch projectiles such as rocks. A student made a working model of a Mangonel. crossbar bucket arm rubber band string scale handle As the handle is turned, the
1. Which one of the following is a vector quantity? A. time B. speed C. energy D. displacement
1. Which one of the following is a vector quantity? A. time B. speed C. energy D. displacement 2. A car is travelling at a constant speed of 26.0 m/s down a slope which is 12.0 to the horizontal. What
Screwed Tubes. December 4, Andreas Bastias Luis Castellanos Howard Hensley Jessica Rhyne
Screwed Tubes December 4, 2008 Andreas Bastias Luis Castellanos Howard Hensley Jessica Rhyne Abstract This project was assigned to get students to think about physics in a real life situation. The goal
Name: Date Due: Motion. Physical Science Chapter 2
Name: Date Due: Motion Physical Science Chapter 2 What is Motion? 1. Define the following terms: a. motion= a. frame of reference= b. distance= c. vector= d. displacement= 2. Why is it important to have
7.3.9 Unbalanced forces
7.3.9 Unbalanced forces 77 minutes 116 marks Page 1 of 33 Q1. The graph shows the results of a test in which a car accelerates to its maximum speed. (a) (i) Describe how the acceleration of the car changes
Physics 117A Exam #1 Fall 2006
Physics 117A Exam #1 Fall 2006 Only calculators and pens/pencils are allowed on your desk. No cell phones or additional scrap paper. You have 1.5 hours to complete the exam. Name Section (Circle): Hutson
5. Find two numbers whose sum is 48 and whose product is to be a maximum.
1 Optimization Practice (4.4) 1. If 40 passengers hire a special car on a train, they will be charged $8 each. This fare will be reduced by $.10 each passenger, for each person in addition to these 40.
Ship Wrecked! For background information on the Design Process, see pages 3-5.
Ship Wrecked! Outcome: 5-3-14: Use the design process to construct a prototype containing a system of two or more different simple machines that move in a controlled way to perform a specific function.
Discover Activity. classified as a machine functions. Explain each object to another student.
Section Integrating How Machines Do Work Reading Preview Key Concepts How do machines make work easier? What is a machine's mechanical advantage? How can you calculate the efficiency of a machine? Key
Systems and Simple Machines Student Activity Book Answer Key
Answer Key Pages 3-6 Systems 1. Answers vary. Examples include: solar system, the body systems, etc. 2. Answers vary. Definitions may include the idea that the parts work together to do a job. 3. Answers
WONDERLAB: THE EQUINOR GALLERY. The science and maths behind the exhibits 30 MIN INFORMATION. Topic FORCES. Age
WONDERLAB: THE EQUINOR GALLERY and maths s INFORMATION Age 7 11 11 14 Topic FORCES 30 MIN Location LEVEL 3, SCIENCE MUSEUM, LONDON What s the science? What more will you wonder? and maths s Wonderlab:
This document belongs to The Physics Classroom. It should not appear on other websites. LOL Charts
This document belongs to The Physics Classroom. It should not appear on other websites. LOL Charts Apprentice Difficulty Level Question Group 1 Question 1 Initial State: Car at rest at top of a hill. Final
Homework of chapter (3)
The Islamic University of Gaza, Civil Engineering Department, Fluid mechanics-discussion, Instructor: Dr. Khalil M. Al Astal T.A: Eng. Hasan Almassri T.A: Eng. Mahmoud AlQazzaz First semester, 2013. Homework
Old-Exam.Questions-Ch-14 T072 T071
Old-Exam.Questions-Ch-14 T072 Q23. Water is pumped out of a swimming pool at a speed of 5.0 m/s through a uniform hose of radius 1.0 cm. Find the mass of water pumped out of the pool in one minute. (Density
Figure 1. What is the difference between distance and displacement?
Q1.A train travels from town A to town B. Figure 1 shows the route taken by the train. Figure 1 has been drawn to scale. Figure 1 (a) The distance the train travels between A and B is not the same as the
EOY Force and Motion REVIEW
Name: ate: 1. The diagram shows two bowling balls of equal mass. all is resting near the edge of a shelf. all is resting on the ground below. 2. Two workers use a ramp to help lift a box onto a dock as
Chapter 7. A) The ball B) The putty C) Both experience the same momentum change D) Cannot be determined from the information given
A rubber ball and a lump of putty have equal mass. They are thrown with equal speed against a wall. The ball bounces back with nearly the same speed with which it hit. The putty sticks to the wall. Which
Name: Date: Class: 5.A snail can move approximately 0.30 meters per minute. How many meters can the snail cover in 15 minutes?
Name: Date: Class: Average speed = 1.What is the average speed of a car that traveled 300.0 miles in 5.5 hours? total distance total time s = d t 2.How much time would it take for the sound of thunder
AP Physics 1 Summer Assignment 2017
AP Physics 1 Summer Assignment 2017 Begin this packet after you confirm your placement with guidance. This assignment is being handed out to all students who have requested AP Physics 1 in 2017-18. Receiving
2 Buoyant Force. TAKE A LOOK 2. Identify What produces buoyant force?
CHAPTER 3 2 Buoyant Force SECTION Forces in Fluids BEFORE YOU READ After you read this section, you should be able to answer these questions: What is buoyant force? What makes objects sink or float? How