Max. Recom. Tube Wall Min. Bend Working Min. Burst O.D. Thickness Radius Pressure Pressure Style (Inches) (Inches) (Inches) (PSI) (PSI) Fittings

Transcription

1

2 General Information Thermoplastic Tubing/Fitting Reference Guide Tube Max. Recom. Tube Wall Min. end Working Min. urst O.D. Thickness Radius Pressure Pressure Style (Inches) (Inches) (Inches) (PSI) (PSI) Fittings Poly-Flo 1 / / Poly-Flo (Polyethylene) 5/ / Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 O.D.) P 3/ / PE 1/ / / / / / / Impolene 1/ / Poly-Flo with 261U Universal Nut & Sleeve (Polyallomar) 3/ / Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 PP 1/ O.D.) with 261U Universal Nut & Sleeve PY 3/ / / / Nylo-Seal 1 / / Poly-Flo with 261U Universal Nut & Sleeve (Nylon 11) 5/ / Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 SN 3/ / O.D.) with 261U Universal Nut & Sleeve NT 1/ OmegaFlo 5/ / Hi-Duty * 3/ / Hi-Seal * 1/ / Nylo-Seal 1 / / Poly-Flo (1/8 & 3/16 O.D. only) with 261U (Nylon 11) 3/ / Universal Nut & Sleeve NSR 1/ / OmegaFlo 3/ / Hi-Duty * 1/ / Hi-Seal * Nylo-Seal 1 / / Poly-Flo with 261U Universal Nut & Sleeve (Nylon 11) 5/ / Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 O.D.) NF 3/ / OmegaFlo 1/ / Hi-Duty * 1/ / Hi-Seal * 5/ / / / / / / Polyvinyl 1/ / Poly-Flo hloride 3/ Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 O.D.) PV 1/ Poly-Flo 1 / Poly-Flo Flame Retardant 3/ / Poly-Flo Kwik-onnect ouplings (1/4 & 3/8 O.D.) 1/ / *onsult factory for further information. 1 Insert must be used with SN tubing when temperature exceeds 180 F and with NF tubing under all temperature conditions. 2 Insert must be used with Poly-Flo tubing under all temperature conditions.

3 General Information Imperial Eastman Fittings and Tubing GENERL INFORMTION Fitting Descriptions Fitting Identification hart Part No. Designation Guide...6 Fitting Selector Guide...6 Thread Size hart...7 INDEX REFERENE DT Decimal and Metric Equivalents of Fractions...97,104 How to Install Tubing Recommended Tubing Flare Dimensions Thermoplastic hemical Resistance hart ssembly Instructions For: Hi-Duty flareless tube fittings flare tube fittings...8 ompresamatic flareless tube fittings...8 ompression flareless tube fittings...8 Flex flareless tube fittings...9 Omega-Flo flareless tube fittings...8 Poly-Flo flareless tube fittings...8 Poly-Flo Kwik-onnect couplers...8 LPH-NUMERI PRT NO. INDEX TEHNIL DT Decimal & Metric Equivalents onversion Factors Temperature onversion HI-SEL Design Features...10 Minimum Working Pressures Derating Factors...17 ssembly Instructions Ordering Information TUE FITTINGS Poly-Flo Flareless Poly-Flo Kwik-onnect ouplers OmegaFlo Push-To-onnect Hi-Duty Flareless Flex Flareless ompression Flareless ompresamatic Flareless Flare HI-SEL FITTINGS Steel Steel O-Ring...74 Stainless Steel raze-seal...83 rass PIPE FITTINGS rass THERMOPLSTI TUING urst vs. Temperature Data Style 6, ir rake Poly-Flo Poly-Flo Flame Retardant Impolene Nylo-Seal PV

4 General Information Fitting Descriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic instrumentation Polyethylene sleeve circuits Polypropylene Shapes: brass, forged Fluid piping systems Nylon SE 377 or equal Polyvinyl chloride Straights: brass, SE Polyallomar 360 or equal Soft metal Sleeves: elcon or Poly-Flo rass Nylo-Seal (SN, NF) Impolene Poly-Flo 500 PSI 125 PSI ody and nuts: hrome- Low pressure instrumentation Polyethylene Kwik-onnect plated brass or Type 316 lines requiring frequent Polypropylene stainless steel connecting and disconnecting Nylon Sleeves: elcon Medical and dental equipment Polyvinyl chloride Springs: Stainless steel Polyallomar O-Rings: una N on brass Soft copper couplings, Viton on Poly-Flo stainless steel couplings Nylo-Seal Impolene OmegaFlo 300 PSI 125 PSI One-piece unit Pneumatic instrumentation Polyethylene Shapes: brass, forged circuits Nylon 11 SE 377 or equal Fluid piping systems Soft copper Sleeves: SE 360 Poly-Flo or equal Nylo-Seal Straights: brass SE Impolene 360 or equal Hi-Duty 4,300 PSI 800 PSI Two piece: body and Instrumentation systems opper nut/sleeve Mobile farm and mobile rass Shapes: brass, forged SE construction equipment Seamless steel 360 or equal Hydraulic and pneumatic Thermoplastic Flareless compression controls design Process control systems Laboratory equipment Flex 1,000 PSI 200 PSI Three piece: body, nut High vibration and opper and elastomeric sleeve shock conditions rass Shapes: brass, forged Diesel engine fuel lines luminum SE 377 or equal Lubrication systems Steel Straights: brass, SE Gasoline, air and Glass 360 or equal water lines Thermoplastic Flareless Special compound sleeves available to 450 F ompression 400 PSI 250 PSI Three-piece: body, nut Low pressure air, oil, opper and sleeve water and gas piping rass Shapes: brass, forged Meets SE J512 luminum SE 377 or equal Thermoplastic Straights: brass, SE 360 or equal ompresamatic 4,500 PSI 850 PSI Two-piece: body and ir, oil, water and opper nut/sleeve gas piping rass Shapes: brass, forged Meets SE J512 luminum SE 377 or equal Except for the Thermoplastic Straights: brass, SE nut and sleeve Seamless steel 360 or equal Nuts and sleeves interchangeable with standard compression bodies Maximum working pressure based on 1/8 O.D. dead soft copper tubing. Please consult Imperial Eastman for additional information. 2

5 General Information Fitting Descriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing 45 Flare 2,850 PSI 225 PSI Two-piece: body and nut Mobile equipment piping opper Shapes: brass, forged ir compressor piping luminum SE 377 or equal HV applications Seamless steel Straights: brass, SE (requires forged nut) 360 or equal Marine 45 flared Meets SE J512 and J513 NSI 31.1 and 70.1, SME oiler and Pressure Vessel ode Hi-Seal raze Seal 19,250 PSI 5,000 PSI 3-Piece body, Instrumentation systems opper Nut and Sleeve Mobile farm and mobile rass construction equipment Seamless steel vailable in brass, Hydraulic and pneumatic steel and stainless controls steel Process control systems Laboratory equipment rass Pipe 3,000 PSI 1,000 PSI Shapes: rass, Forged ir ompressor Piping rass Pipe SE 377 or equal Water System Piping Iron Pipe Straights: rass, SE oolant Transmission Lines 377 or equal Dryseal Threads Meets all SE rass Pipe Fittings standards Maximum working pressure based on 1/8 O.D. dead soft copper tubing. Please contact Imperial Eastman for additional information. 3

6 General Information Fitting Identification hart Poly-Flo OmegaFlo Hi-Duty Flex ompression ompresamatic 45 Flare Hi-Seal Male onnector 268P 268OF 88L 68FL 68F 68M 648F 768F Female onnector 266P 266OF 86L 66FL 66F 66M 646F 766F 90 Male Elbow 269P 269OF 89L 69FL 69F 69M 649F 769F 90 Female Elbow 270P 90L 70FL 70F 70M 650F 770F 45 Male Elbow 94L 94FL 74F 74M 654F 754F Union 262P 262OF 82L 62FL 62F 62M 642F 762F ulkhead Union 282P 282OF 72L 782F Union Elbow 265OF 85L 65FL 65F 65M 655F 765F Female ranch Tee 277P 95L 777F 4

7 General Information Fitting Identification hart Poly-Flo OmegaFlo Hi-Duty Flex ompression ompresamatic 45 Flare Hi-Seal Male ranch Tee 272P 272OFS 92L 72FL 72F 72M 645F 772F Male Run Tee 271P 271OFS 91L 71FL 71F 71M 651F 771F Union Tee 264P 264OF 84L 64FL 64F 64M 644F 659F 764F Nut 261P FL 61F 61M 511GS 761F 641F Sleeve 260U 60FL 60F 760F ross 652F 752F all heck 83L 63F 63M 643F Reducing Union 256P 87L 656F 756F Reducer 297P 5

8 General Information Part Number Designation Guide Part Numbers for Tube Fittings To order Imperial Eastman tube fittings, use the diagram below as a guide. Example: ompresamatic fittings with 3/8 tube connection and 1/4 male pipe thread. Part Numbers for Pipe Fittings To order Imperial Eastman brass pipe fittings, use the diagram below as a guide. Example: rass 1/8 NPTF female union. Fitting style Fitting style Tube O.D. size Material Pipe size Pipe size 68M 06 X 04 Part number = 68M06X Part number = Fitting Selector Guide MXIMUM REOMMENDED WORKING PRESSURE (PSI) FITTING Dash No. FITTING STYLE MTERIL Hi-Duty 1 rass 4,300 2,850 2,100 1,800 1,500 1,150 1, Flare 1 rass 2,850 2,100 1,800 1,500 1,100 1, ompresamatic 1 rass 4,500 2,500 1,750 1,800 1, ,000 ompression 1 rass Flex elled Tubing 1 rass 2,000 1,500 1, Flex Non-elled Tubing 1 rass 1, OmegaFlo rass 300 PSI MXIMUM PolyFlo rass 500 PSI MXIMUM rass Pipe Fittings rass 3,000 PSI MXIMUM 2 2,000 PSI MXIMUM 3 Maximum working pressures depend on tubing material, tube O.D., wall thickness and fitting size. The pressures listed above reflect static pressures at 72 F with the following material and Dash No. /wall thickness. 1 TUING MTERIL: opper dead soft seamless, STM 75, NSI H23.3, 02/.030, 03/.030, 04/.030, 05/.032, 06/.032, 08/.032, 10/.035, 12/.035, 14/ Exceptions: 101 = 2500 PSI; 102 = 2500 PSI; 104 = 1500 PSI 3 Exceptions: 102 = 1000 PSI; 104 = 625 PSI; 108 = 1500 PSI; 116 = 1500 PSI; 122 = 1500 PSI 6

9 General Information Thread Size hart Use this chart to determine fitting thread sizes per tube O.D. size. For example: Thread sizes for a Hi-Duty 1/8 fitting, with Part No. 88L02X02 are...5/16-24 tube thread size x 1/8-27 pipe thread size, as below: Fitting Style Tube O.D. Pipe size 88L 02 X 02 PRT NUMER = 88L02X02 TUE SIZE (O.D.) Dash No FITTINGS Size 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 TUE END THREDS Hi-Duty 5/ /8-24 7/ /2-20 9/ / / / Flare 5/ /8-24 7/ /2-20 5/ / /4-16 7/ / /4-12 ompresamatic 5/ /8-24 7/ /2-24 9/ / / / ompression 5/ /8-24 7/ /2-24 9/ / / / Flex 3/8-24 7/ /2-24 9/ / / /8-18 Poly-Flo and Kwik-onnect 5/ /8-24 3/8-24 7/ / /16-20 PIPE END THREDS Pipe Fittings 1/8-27 1/4-18 3/8-18 1/2-14 3/ /2 7

10 General Information ssembly Instructions Fitting To ssemble To Reconnect Hi-Duty 1. Using a tube cutter, cut tube squarely and cleanly, 1. Reinsert tubing Flareless removing all burrs. 2. Tighten nut one eighth of a turn more Tube Fittings 2. Grasp fitting. Do not remove nut. than previous make-up. 3. Insert tube in fitting through nut until tube seats firmly NOTE: The Hi-Duty fitting can be against tube shoulder in body. disconnected and reconnected repeatedly 4. Grip tube firmly to prevent turning and tighten nut until and will always reconnect tightly. a slight give is felt. This give indicates the sleeve has been sheared from the nut. 5. ontinue tightening for one and one-half additional turns for a positive, leakproof seal. It is not necessary to tighten the nut all the way down. 45 Flare 1. Using a tube cutter, cut tubing squarely and cleanly, 1. Tighten to original make-up position, plus Tube Fittings removing all burrs. an additional one-sixth turn of the nut 2. Slide nut onto tubing with the open threaded end of (one flat of the hex). the nut facing toward the end to be flared. 3. Flare tubing end with a good quality flaring tool. 4. Position the flare against the nose of the fitting body and align the tube with the fitting. 5. ssemble nut to body, tightening finger tight. 6. Tighten nut with a wrench one-quarter to one-half turn for a leakproof connection. ompression 1. Using a tube cutter, cut tube squarely and cleanly, 1. Tighten to original make-up position, plus Flareless Tube removing all burrs. an additional one-sixth turn of the nut Fittings 2. Insert tubing into the fitting body until it rests against (one flat of the hex). the shoulder. 3. Move sleeve into position and tighten the nut. NOTE: No flaring, soldering or other special preparation of the tubing is necessary before assembly. ompresamatic 1. Using a tube cutter, cut tube squarely and cleanly, 1. Tighten to original make-up position, plus removing all burrs. an additional one sixth turn of the nut 2. Insert the tube into fitting. e sure the tube bottoms (one flat of the hex). on the fitting shoulder. 3. Tighten (hand-tight), and complete the seal with one wrench turn on all sizes. Poly-Flo 1. Using a tube cutter, cut tubing squarely and cleanly, 1. Tighten nut to original make-up position, Flareless removing all burrs. tightening finger tight. Tube Fittings 2. Push tubing into fitting and tighten the nut. NOTE: There is no need to disassemble the fitting before assembly. When used with Poly-Flo or PV tubing, fitting is assembled finger tight. No wrenches needed. Poly-Flo 1. Using a tube cutter, cut tubing squarely and cleanly, 1. Tighten nut to original make-up position, Kwik-onnect removing all burrs. tightening finger tight. ouplers 2. Push tubing into fitting and tighten the nut. NOTE: There is no need to disassemble the fitting before assembly. When used with Poly-Flo or PV tubing, assembly is finger tight. OmegaFlo 1. Using a tube cutter, cut tubing cleanly and squarely. 1. Firmly push tubing into the fitting until it Push-to-onnect/ 2. Firmly push the tubing into the fitting until it will enter will enter no further. properly assembled Push-to-Release no further. properly assembled tube cannot be pulled tube cannot be pulled out by hand. Pneumatic Fittings 8 out by hand. 3. To disconnect, simply push back on the brass collet and release tubing.

11 Fitting To ssemble To Reconnect General Information ssembly Instructions Flex Flareless 1. Using a tube cutter, cut tube squarely and cleanly, 1.Tighten to original make-up position, Tube Fittings removing all burrs. making sure the nut is bottomed. 2. Slip nut and sleeve over tube. 3. Insert tubing in fitting body as far as it will go and tighten nut until stop is reached. The elastic sleeve ordinarily will extrude slightly around the tube at the end of the nut. This extrusion further aids in isolating the tube from the nut. FLEX FLRELESS TUE FITTINGS PRESSURE HRT FITTING TUING MTERIL: RSS MTERIL: LL TYPES REOMMENDED MX MUM WORKING PRESSURE (PSI) Service Tube O.D. Tubing ll Tubing onditions (Inches) Not elled* elled Static Pressure 1/8 1,000 2,000 3/ ,500 Very Minor 1/ ,000 Surges 5/ / Minor 1/ Line Vibration 5/ / /8 300 Static Pressure 1/ ,600 3/ ,200 Minor Surges 1/ / Severe 3/ Vibration 1/ / / /8 200 To ssemble (ontinued) Figure1 Tube Length alculator This table shows distance tube extends beyond face of Flex fitting body on installation with bell on tubing and without bell on tubing. With ell Less ell Tube O.D. With ell Without ell (Inches) (Inches) (Inches) 1/8 3/16 3/16 3/16 3/16 7/32 1/4 3/16 1/4 5/16 3/16 1/4 3/8 3/16 1/4 1/2 3/16 1/4 5/8 3/16 Tubing should be belled. 3/4 3/16 Tubing should be belled. 7/8 1/4 Tubing should be belled. Very Severe 1/ ,200 Vibration 3/ / Minor Tube 5/ Movement 3/ / Mechanical 5/8 200 Shock 3/ /8 100 Nut Tubing ell c *Where high application pressures are involved, and on all sizes larger than 1/2 O.D., the end of the tube should be slightly belled. How to assemble for higher pressure applications: 1. onsult pressure chart to determine if tubing should be belled for your particular application. 2. Slip the nut and sleeve over tubing. The sleeve should be positioned near end of tubing just behind the surface to be belled. 3. ell tubing with standard 45 flaring tool or 90 punch. The size of bell should be that shown in Figure 2. Figure 2 Recommended Size of ell Tube O.D. ell Dia. Tube O.D. ell Dia. (Inches) (Inches) (Inches) (Inches) 1/ / / / / / / / /

12 Hi-Seal Design Features ompact design saves space. butt-joint type design and freedom from flaring permit bends to be made exceptionally close to the tube end. In areas where space is limited, tubing must extend through the sleeve but exact placement of tubing in the fitting is not critical. vailable in a variety of metals, styles and sizes. Hi-Seal variety allows you to specify one product to complete the entire job. hoose from brass, steel, stainless steel, and more. Meets low and high pressure applications. Hi-Seal fittings are recommended for low or high pressure service within the safe pressure ranges of the most commonly used types of commercially available tubing. 10 Fitting is tight when threads are out of sight. No tube marking or disassembly needed to assure proper make-up. Positive tubing support on both sides of gripping teeth absorbs shock, vibration and tube movement. Seal maintained even under abusive or vibrating service. Reserve gripping power of second gripping tooth provides fresh seal on every remake. Positive seal maintained, even after repeated disassembly, without tubing constriction. Hi-Seal design prevents locked-in nut because body threads are not deformed outwardly. lways easy to disassemble when necessary. Hi-Seal Fittings can be used on varying wall thickness tubing with unvarying results. Safety margin insures tight joint even without exact placement of tubing in fitting. Even tubing not squarely cut off will hold tight. ontrolled bite does not deform tubing and constrict flow; yet Hi-Seal holds to burst pressures of tubing. One-piece, collared sleeve. Tube supports on both sides of sealing area hold tubing and absorb shock and vibration. Performance in vacuum applications. Independent lab tests of Hi-Seal fittings indicate no leakage when tested by means of a mass spectrometer leak detector, adjusted to indicate a leakage rate of 1.0 x standard cubic centimeters of helium per second. Designed for high temperatures. Hi- Seal fittings meet the following temperature limitations for tubing systems: 800 F with stainless steel 425 F with copper and brass 600 F with steel Exceeds vibration and shock standards. Hi-Seal fittings far exceed the minimum requirement of 10,000,000 cycles of vibration required under Military Specification MIL-F-18280E. Hi-Seal fittings permit overhang deflection because the sleeve gives positive tubing support on both sides of the seal with the tube. Pivot points are eliminated the cause of failure in many fittings. Handles repeated assembly. Military Specification MIL-F-18280E also requires that a fitting connection be taken apart and remade a minimum of eight times. Imperial Eastman engineering standards specify a minimum of TWIE the number of remakes required by military specifications. The reserve gripping action of Hi- Seal fittings permits the fitting to exceed this minimum, while still remaining free from leakage. Meets industry s conformance.those conformances include: JI Pneumatic and Hydraulic Standards NSI ode for Pressure Piping SME ode* for Pressure Piping DNV**. (Det Norske Veritas rules for classification of steel ships and mobile offshore units.) MIL.** onforms to MIL-F-18280E and MIL-F-18866G NFP. Manufactured in accordance with NFP recommended standard numbers T , T3.8.3R and T * **Performance standard only. Not dimensionally interchangeable. Temperature ratings given for non-o-ring connectors.

13 Eliminates welded connections. Say goodbye to welded connections! The raze-seal fitting solves the problems of tubing installations which demand absolute reliability under very high pressures, vacuum, higher temperatures, cryogenics and vibration applications which formerly required welded connections. That s because raze-seal sleeves contain a special silver alloy brazing ring. This sleeve does not have gripping serrations like the standard Hi-Seal sleeve. The raze-seal sleeve is placed over the end of the tube and heated, causing the ring of brazing alloy to flow and form a tough, lasting bond between the tube and the sleeve. The raze-seal sleeve and nut are then assembled to the standard Hi-Seal fitting body. Same performance as Hi-Seal connections! This fitting assembly offers all the advantages of the standard Hi-Seal fittings, including its ability to be repeatedly disconnected and reassembled without loss of original reliability. ssembly advantages. The raze- Seal fitting is more compact, economical and easier to install than any other fitting made for very high pressure, high and low temperature service. raze-seal fittings require minimum tube preparation. No machining of the tube is necessary. Tube need only be cleaned and fluxed. The easy brazing operation is far faster and cleaner than welded joints. Reliability for critical installations. The porosity which can occur in a welded joint is eliminated in a raze-seal connection. The brazing ring was especially developed to give 100% coverage, providing a completely reliable connection. raze-seal fittings eliminate contamination of the system and the need for stress relieving which can be caused by welded connections. raze-seal fittings can be readily inspected for cleanliness before assembly. They allow for correction of installation errors by reheating and removing the sleeve. ll of these features eliminate the hazards of a permanently brazed or welded non-threaded connection. raze-seal fittings will hold high and low pressure volatiles and other fluids where zero leakage is required. These fittings are excellent for cryogenic applications where nitrogen, hydrogen or helium must be conducted under zero leakage conditions. These fittings have been used with complete success on applications which caused every other conventional connecting method to fail. raze-seal sleeves contain a special silver alloy brazing ring raze-seal Design Features raze-seal reducing sleeves connect any body size to a smaller tube O.D. size. n important advantage of a raze-seal fitting is that tubing of a smaller diameter can be connected to any specified fitting body sleeve. (Jump size connections can be made). This feature is extremely convenient on tees, for example, where any smaller size tube can be connected to the same tee body. raze-seal reducing sleeves are used with the standard raze- Seal nuts and Hi-Seal bodies. typical raze-seal reducing sleeve. 11

14 Hi-Seal Maximum Working Pressures FITTING MTERIL: TUING MTERIL: 12 Steel Steel, SE 1010, Dead Soft, old Drawn and razed Steel ommercially vailable Tubing Wall Thicknesses Maximum Recommended Working Pressure (PSI) Seamless Steel, SE 1010, razed Steel Tube Dead Soft, old Drawn* (Such as undy or GM) Service O.D. onditions (In.) / / / / / / to-1 5/ Safety 3/ Factor 7/ / / / / / / / / to-1 5/ Safety 3/ Factor 7/ / / / / / / / / to-1 5/ Safety 3/ Factor 7/ / / / / / / / / to-1 5/ Safety 3/ Factor 7/ / / *bove pressures are based on the use of steel Hi-Seal fittings with SE 1010 steel tubing. Higher pressures may be obtained with certain other high strength steel tubing. heck with factory for pressure limitations on type of tubing being used. Note: 1. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those listed on page.

15 FITTING MTERIL: Type 316 bodies and nuts with 17-4 PH Sleeves or Stainless Steel Type 316 assemblies with Type 316 Sleeves TUING MTERIL: nnealed Stainless Steel, Type 304 Hi-Seal Maximum Working Pressures ommercially vailable Tubing Wall Thicknesses Maximum Recommended Working Pressure (PSI) Type 316 ssemblies Type 316 ssemblies 17-4 PH Sleeves 316 Sleeved (Welded or Seamless Tubing, (Seamless Tubing, Hardness Tube Hardness Rockwell 90 Maximum) Rockwell 90 Maximum) Service O.D. onditions (In.) / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / Note: 1. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those listed on page. 13

16 Hi-Seal Maximum Working Pressures FITTING MTERIL: Stainless Steel, Type 316, bodies and nuts with 17-4 PH Sleeves TUING MTERIL: 1/8 Hard Stainless Steel, Type 304 (Hardness Rockwell 25 Maximum) ommercially vailable Tubing Wall Thicknesses Maximum Recommended Working Pressure (PSI) Tube Service O.D. onditions (In.) / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / / / / / / to-1 5/ Safety 3/ Factor / / Note: 1. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those 14

17 FITTING MTERIL: TUING MTERIL: rass opper, Dead Soft, Seamless Hi-Seal Maximum Working Pressures ommercially vailable Tubing Wall Thicknesses Maximum Recommended Working Pressure Tube (PSI Service O.D. onditions (In.) / / / / / to-1 1/ Safety 5/ Factor 3/ / / / / / / to-1 1/ Safety 5/ Factor 3/ / FITTING MTERIL: TUING MTERIL: rass opper, Half Hard, Seamless ommercially vailable Tubing Wall Thicknesses Maximum Recommended Working Pressure Tube (PSI) Service O.D. onditions (In.) / / / / / to-1 1/ Safety 5/ Factor 3/ / / / / / / to-1 1/ Safety 5/ Factor 3/ / Note: 1. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those listed on page. 15

18 Hi-Seal Maximum Working Pressures PIPE THRED ENDS Pipe Pipe thread ends Maximum Recommended Working Pressures Service Size (PSI) onditions (In.) Fitting ody Material Type 316 rass arbon Steel Stainless Steel 1/ / to-1 1/ Safety 3/ Factor / / to-1 1/ Safety 3/ Factor / / to-1 1/ Safety 3/ Factor / / to-1 1/ Safety 3/ Factor Note: 1. Fittings with tapered pipe ends (male or female) are not recommended if system pressure exceeds these values. 2. Some codes may set lower limits than are indicated here. 3. Refer to previous charts for maximum tube working pressures based on material and on all thickness which may lower values of the above. raze-seal Maximum Working Pressures FITTING MTERIL: TUING MTERIL: Type 316 Stainless Steel 316 Stainless Steel Tube Maximum Recommended Service O.D. Working Pressures onditions (In.) (PSI) 1/4 19,250 ased On 3/8 16,000 80% raze 1/2 15,600 overage 9/16 15,400 5/8 15,400 4-to-1 3/4 15,000 Safety 7/8 14,000 Factor 1 13, /4 12, /2 11,000 Note: 1. These maximum ratings, which are based on a 4-to-1 safety factor, apply to the brazed connection only. ctual installations must be derated to allow for tube strength, other style ends (if any), fitting body strength and elevated temperatures. 2. It is recommended that tubing with an O.D. of nominal to plus tolerance be used to provide optimum clearance for the brazed joint. 3. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those listed on page. 16

19 FITTING MTERIL: TUING MTERIL: arbon Steel arbon Steel raze-seal Maximum Working Pressures Tube Maximum Recommended Service O.D. Working Pressures onditions (In.) (PSI) 1/4 15,000 ased On 3/8 12,000 80% raze 1/2 11,700 overage 9/16 5/8 11,500 3/4 11,250 7/8 10, , /4 9, /2 8,200 Note: 1. These maximum ratings, which are based on a 4-to-1 safety factor, apply to the brazed connection only. ctual installations must be derated to allow for tube strength, other style ends (if any), fitting body strength and elevated temperatures. 2. It is recommended that tubing with an O.D. of nominal to plus tolerance be used to provide optimum clearance for the brazed joint. 3. Working pressure based on room temperature (72 F) service. For elevated temperature service, multiply these pressures by derating factors obtained from chart on page Fittings with tapered pipe threads (NPT or NPTF) may have pressure capabilities limited to that of the pipe threads. Such fittings should not be used at pressures exceeding those listed on page. DERTING FTORS for Elevated Temperature pplications for Hi-Seal Hi-Seal & raze-seal Derating Factors DERTING FTORS for Elevated Temperature pplications for raze-seal TEMPERTURE DERTING FTOR RSS RON STEEL TYPE 316 STINLESS STEEL TEMPERTURE DERTING FTOR WORKING TEMPERTURE F WORKING TEMPERTURE F PRESSURE RTING PROEDURE FOR HI-SEL & RZE-SEL FITTINGS 1. For applications involving service at elevated temperatures the pressure rating must be multiplied by an appropriate temperature derating factor obtained from the temperature derating chart above. 2. arbon Steel fittings not normally recommended above 600 F Stainless Steel fittings not normally recommended above 800 F. 4. These working pressures are not necessarily valid for system components other that raze- Seal fitting ends. Prudent system design requires that all other system components be evaluated for their specific proper pressure capabilities. 17

20 Hi-Seal ssembly Instructions Male and Female Pipe Thread SE Straight Thread Port, ack-up Washer and Lock Nut General Information Port Sealing Methods Hi-Seal fittings are furnished with two types of port connections: 1. NPTF Tapered Pipe Threads. arbon steel, stainless steel, and brass fittings are supplied with dryseal threads, which meet all the appropriate requirements of SE standards. Fitting bodies are machined with dryseal threads, which are designed to assure better thread contact and to prevent spiral leakage. The length of dryseal pipe threads is highly valuable when reconnecting. It allows for further takeup; and in combination with the thread form, gives a tighter joint with less chance of leakage. 2. Straight Thread O-Ring Seal. For connecting into ports of hydraulic valves and other parts, the O-ring seal offers the following advantages. It eliminates the possibility of broken fittings, deformed housings, and cracking of ports which can result from over-torquing with pipe threads. n O-ring seal also lets you position elbows and tees so that tube ends will always be in proper alignment. Hi-Seal elbows and tees with straight thread O-ring seal have a back-up washer crimped into position in the O-ring groove ahead of the lock nut. This washer prevents the O-ring from extruding into threads when the joint is under pressure. When specifying O-rings, they must be of a compound compatible with the fluid in the system. ssembly Instructions for Fittings with Straight Thread O-Ring Seal 1. Turn the locknut as far back on the fitting as is possible. Lubricate O-ring by coating with a light oil or petrolatum and position to the extreme rear of the O-ring groove. 2. Turn the locknut down until it just contacts the back-up washer. 3. Holding the fittings and the locknut in position, screw the fitting into the straight thread boss until the back-up washer just contacts the face of the boss. 4. Position the fitting by turning the fitting out (counter clockwise) up to 359 and tighten the locknut. 5. On a Hi-Seal connector the hex on the body takes the place of the locknut. Screw fully into straight thread boss and tighten hex against face of boss. ody Hex Nut ack-up Washer O-Ring ssembly Instructions for djustable Fittings 1. Turn the locknut as far back on the fitting as is possible. Lubricate O-ring by coating with a light oil or petrolatum and position to the extreme rear of the O- ring groove. 2. Turn the locknut down until it just contacts the backup washer. 3. Holding the fittings and the locknut in position, screw the fitting into the straight thread boss until the back-up washer just contacts the face of the boss. 4. Position the fitting by turning the fitting out (counter clockwise) up to 360 and tighten the locknut. 5. On a Hi-Seal connector the hex on the body takes the place of the locknut. Screw fully into straight thread boss and tighten hex against face of boss. 18

21 Hi-Seal ssembly Instructions Nut Sleeve Teeth in sleeve grip tube. Short heavy end ody e sure threads are completely covered by the nut. Figure 1 Figure 2 Figure 3 Figure 4 Hi-Seal ssembly Instructions 1. For best results. lways use a fitting whose materials are compatible with the tubing that is used. (e.g when using stainless steel tubing, use 316 stainless steel fittings). This will minimize the possibility of chemical or galvanic corrosion.. Keep in mind that the sleeve should always have a hardness at least equal to that of the tubing used. Type 316 sleeves may be used with seamless annealed stainless steel tubing.. When assembling fittings to both ends of a length of tubing, partly tighten the nut at one end until the tube cannot be turned by hand; then fully tighten the fitting at the other end until the threads are completely covered. Finally, finish tightening the first end until those threads are completely covered. 2. Preparation of Tubing. ut tubing with a tube cutter or a hacksaw with a fine tooth blade and a sawing vise.. Deburr inside and outside of tubing sufficiently to remove burrs to assure that sleeve will slip freely onto the tube. 3. ssembly.. Lubricate the threads and the camming area of the nut with a lubricant that will be compatible with the system fluid. Lubrication is especially important with stainless steel assemblies.. Slide nut onto tubing, place sleeve over end of tube with short, heavy end towards end of tubing (Figure 1). utt tubing end against tubing stop in body (Figure 2).. ssemble nut, sleeve, and tube to body hand tight (Figure 3). D. Tighten nut with a wrench until threads on body are completely covered by the nut as shown in Figure 4. This visual check provides positive assurance of a tight joint. 4. Remake(s). When a Hi-Seal connection is to be reassembled, retighten the Hi- Seal nut 1/6 turn (one hex flat) beyond the previously assembled position. This will properly reseal the connections. Nut Sleeve Presetting tool 700FS Figure 1 Figure 2 Figure 3 Figure 4 Presetting Instructions for Hi-Seal Fittings Normally it is not necessary to preset Hi-Seal fittings. Presetting is ordinarily used only where adequate torque cannot be applied at point of installation due to space restrictions, or for pre-production assembly. For these cases, special presetting tools are available. In an emergency, a fitting body may be used as a presetting tool. 1. Preparation of Tubing. ut tubing with a tube cutter or a hacksaw with a fine tooth blade and a sawing vise.. Deburr inside and outside of tubing sufficiently to remove burrs and to assure that sleeve will slip freely onto the tube. 2. Presetting. Select the proper size presetting tool.. Lubricate the threads and the camming area of the nut with a lubricant that will be compatible with the system fluid.. Slide nut onto tubing and place sleeve over end of tube with short, heavy end facing toward end of tubing as shown in Figure 1. utt tubing end against tubing stop in tool. D. ssemble nut, sleeve and tube to presetting tool hand tight as shown in Figure 2. E. Tighten nut with a wrench until threads on presetting tool are covered by the nut as shown in Figure Disassembly and Inspection. Disassemble from presetting tool.. Make sure that: (1) Sleeve has been coined into tubing, leaving a slight concave surface on outside diameter of sleeve. (2) Sleeve does not move longitudinally. (It may rotate on tube). 4. Final ssembly. Install the line in position and finger tighten nut on body of fitting.. Tighten nut until an increased resistance to turning is felt. t this point the nut should completely cover the threads on the body; if not, tighten until it does. See Figure 4. 19

22 raze-seal ssembly Instructions Tube O.D. Size (In.) 1/4 3/8 1/2 5/8 3/4 7/ /4 1 1/2 Typical ssembly Torque (Pounds-Inch) Fitting Ready for razing fter razing and ssembly General Information To produce a satisfactory brazed joint, certain precautions must be taken. The parts to be brazed must be very thoroughly cleaned so that all scale, oxides, grease, oil, dirt and other foreign materials are removed. proper, silver brazing flux must be used. These fluxes are fluid and active at the flow point of the brazing alloy. (Note that sleeve is furnished with silver brazing ring.) Flux should be applied evenly to both the inside and outside of sleeve and outside of tubing with care so that no bare spots remain. method of applying heat should be used to heat the tube and sleeve uniformly. When heating with an oxy-acetylene torch, a tip sufficiently large with a soft neutral or slightly reducing flame should be used to give the necessary heat. s a general rule, best results are obtained when the joint is heated rapidly and kept at the brazing temperature for the minimum time required for proper flowing of the alloy. Resistance heating is acceptable; however, the current must be kept low enough to prevent severe burning at the contact points. raze-seal ssembly Instructions 1. Preparation of Tubing. ut tubing squarely with a tube cutter or a hacksaw with a fine tooth blade and a sawing vise. Deburr inside and outside of tubing to remove burrs and to assure that sleeve will slip freely onto the tube. Inspect tube end for surface imperfections and ovality on the outer circumference. Make sure it conforms to tolerances and meets requirements of applicable specifications. 2. ssembly.. lean sleeve (with silver brazing ring intact) and tube with a solvent to remove all oils and dirt. With a piece of emery cloth, polish the outside surface of the tubing end over a two-inch length to remove any metal oxides which may have formed.. Flux the inside of the sleeve, also covering the silver brazing ring, and place sleeve on tube. Flux the outside of the sleeve. Flux the outside of the tube to a point beyond the sleeve depth.. Holding the tube upright if possible, heat tube and sleeve, concentrating the heat on the tube just beyond the sleeve. Slowly move the torch forward toward the far end beyond the sleeve and back to the tube repeatedly until the braze ring begins to melt. Then move the torch to the near end of the sleeve and hold until an even fillet begins to form. When fillet is formed, remove the torch. t the flow temperature of the brazing alloy, the tube and sleeve should have a dull red color. While the alloy is still fluid, lightly press the sleeve down so that it abuts the end of the tubing. Push the sleeve all the way onto the tubing. Use a wood block or similar object to avoid damage. D. ny excess brazing alloy that runs down the tubing or flows on the seating surface of the sleeve should be wiped off before the alloy solidifies. llowed the brazed assembly to cool. Then scrub in hot water to remove excess flux. Filing, scratch brush, or emery cloth should not be used to clean excess alloy from the precision seating surface of the sleeve, as scratch marks or flat spots will cause leakage. E. ssemble the fitting by tightening the nut. Lubricate the threads and the seat area of the body with an acceptable lubricant that will be compatible with the system fluid. ssemble fitting, using the recommended typical assembly torque values shown above. Remake(s). When fittings are disassembled, retighten to the original tightness or makeup. 20

23 Hi-Seal Ordering Information EXMPLE: Type of Fitting Tube O.D. Size 768FSS 06X04 To order Hi-Seal fittings, one of the following suffix letters must be added to the catalog number to indicate the metal desired: S Steel. (Low arbon) Elbows and tees are close grain forgings. SS Stainless Steel (316) Material (Stainless Steel) rass Pipe Size The size designation must also be included with the catalog number. 1. EXMPLE: When specifying connector 768F in stainless steel, with 3/8 O.D. tube connection and 1/4 male pipe thread. This should be written: No. 768FSS06X EXMPLE: No. 768FSO06 would specify a steel connector for 3/8 O.D. tube with straight thread O-ring port seal on other end. When fittings with O-ring port seal are desired, this specification must also be included in the catalog number. The letter O following the number indicates O-ring. Materials for Standard Hi-Seal Fittings RSS FITTINGS Elbows and Tees: rass forgings S..E onnectors, Unions, Sleeves and Nuts: Stress relieved brass bar stock S..E. 360 or equivalent. STEEL FITTINGS Elbows and Tees: lose grained steel forgings S..E. 12L14 or equivalent. onnectors, Unions and Nuts: Steel bar stock S..E. 12L14 or equivalent. Sleeves: Steel bar stock S..E , stress relieved, black phosphate finish. odies and Nuts are furnished with zinc plate finish as standard. (Dry film lubricant finish standard on 5/8 nuts and larger.) lack phosphate finish can be obtained on a special order. STINLESS STEEL FITTINGS Elbows and Tees: Stainless steel forgings Type 316. onnectors and Unions: Stainless Steel bar stock Type 316. Nuts: Stainless steel bar stock Type 316. Dry film lubricant finished to provide lubricant for facilitating assembly. Sleeves: Stainless steel bar stock Type 316. Type 17-4PH is optional. 21

24 raze-seal Ordering Information EXMPLE: Sleeve raze-seal Sleeve 760FSSZ06 How to Specify and Order raze-seal Fittings ny Hi-Seal steel or stainless steel fittings can be converted to an extra-reliable raze-seal fitting by replacing the Hi-Seal nut and sleeve with the raze-seal nut and sleeve. Material (Stainless Steel) Sleeve Size raze-seal Presetting Tool Hi-Seal Presetting Tool Made of hardened stainless steel. For presetting Hi-Seal fittings. Presetting is ordinarily used only when adequate torque cannot be applied at point of installation due to space restrictions, or for pre-production assembly. Part No. 700FS04 700FS06 700FS08 Maintenance of Presetting Tool Handle presetting tools with care, being sure that the threads and 12 seat are not nicked or in any way damaged. Do not attempt to rework took if it becomes damaged obtain a new tool. Keep tools stored so that they will not be damaged. Seal-peel dip or a similar protective coating that is used for gauges and tools is recommended. 22

25 Poly-Flo Flareless Tube Fittings Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread STYLE 31PG Spring Guard For use with 261-PG and 261-UG nuts. 31PG04 1 / PG05 5 / PG06 3 / PG08 1 / STYLE 256P Reducing Union 256P06X04 3 /8 x 1 / STYLE 259P ap 259P04 1 / P05 5 / P06 3 / P08 1 /2.593 STYLE 260P Plastic Sleeve 260P04 1 / P05 5 / P06 3 / P08 1 /

26 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread STYLE 260U oupling Sleeve 260U06 3 /8 260U08 1 /2 STYLE 260U Universal rass Sleeve 260U02 1 / U03 3 / U04 1 / U05 5 / U06 3 / U08 1 /2.359 STYLE 261P Nut and Plastic Sleeve ssembly 261P04 1 / P05 5 / P06 3 / P08 1 / STYLE 261PG Nut and Plastic Sleeve ssembly For use with Spring Guard 261PG04 1 / PG05 5 / PG06 3 / PG08 1 /

27 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread STYLE 261U Nut Only 261U02 1 / U03 3 / U04 1 / U05 5 / U06 3 / U08 1 / STYLE 261U Universal Nut and rass Sleeve ssembly 261U01 1 / U02 1 / U03 3 / U04 1 / U05 5 / U06 3 / U08 1 / STYLE 261UG Nut Only For use with spring guard and 260-U sleeve. 261UG04 1 / UG05 5 / UG06 3 / UG08 1 / STYLE 262P Union 262P02 1 / P03 3 / P04 1 / P05 5 / P06 3 / P08 1 /

28 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread STYLE 262P Union Poly-Flo to Standard ompresamatic 262P04 1 / P06 3 / STYLE 262PH Union Poly-Flo to Hi-Duty 262PH04 1 / PH06 3 / STYLE 262PHS Union Poly-Flo to Hi-Seal 262PHS04 1 / STYLE 264P Union Tee 264P02 1 / P03 3 / P04 1 / P05 5 / P06 3 / P08 1 /

29 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread D STYLE 266P Female onnector 266P02X02 1 /8 1 / P03X02 3 /16 1 / P03X04 3 /16 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P05X02 5 /16 1 / P06X04 3 /8 1 / P08X06 1 /2 3 / STYLE 268P Male onnector 268P02X01 1 /8 1 / P02X02 1 /8 1 / P03X01 3 /16 1 / P03X02 3 /16 1 / P04X01 1 /4 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P04X06 1 /4 3 / P05X02 5 /16 1 / P05X04 5 /16 1 / P06X02 3 /8 1 / P06X04 3 /8 1 / P06X06 3 /8 3 / P08X06 1 /2 3 / P02X / * P04X / * *Part number includes gaskets. STYLE 269P Male Elbow D 269P02X01 1 /8 1 / P02X02 1 /8 1 / P03X01 3 /16 1 / P03X02 3 /16 1 / P04X01 1 /4 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P04X06 1 /4 3 / P05X02 5 /16 1 / P06X02 3 /8 1 / P06X04 3 /8 1 / P06X06 3 /8 3 / P08X06 1 /2 3 /

30 Tube Fittings Poly-Flo Flareless Material: rass Wrench Wrench Part Tube Pipe Pad/Hex Pad/Hex Style No. O.D. Thread D E STYLE 269SP Male Elbow Swivel 1/8 O.D. tube size does not have tube support. D 269SP04X02 1 /4 1 / SP04X04 1 /4 1 / SP06X02 3 /8 1 / SP06X04 3 /8 1 / SP06X06 3 /8 3 / SP08X06 1 /2 3 / E STYLE 269LLP Extra Long Male Elbow 269LLP04X04 1 /4 1 / D STYLE 270P Female Elbow 270P02X02 1 /8 1 / P03X02 3 /16 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P06X04 3 /8 1 / P08X06 1 /2 3 / D 28

31 Poly-Flo Flareless Tube Fittings Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread D STYLE 271P Male Run Tee 271P02X02 1 /8 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P05X02 5 /16 1 / P06X04 3 /8 1 / P08X06 1 /2 3 / D STYLE 272P Male ranch Tee D 272P02X02 1 /8 1 / P03X02 3 /16 1 / P04X02 1 /4 1 / P04X04 1 /4 1 / P05X02 5 /16 1 / P06X02 3 /8 1 / P06X04 3 /8 1 / P08X06 1 /2 3 / STYLE 277P Female ranch Tee 277P04X02 1 /4 1 / P04X04 1 /4 1 / P04X06 1 /4 3 / D 29

32 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe ulkhead Pad/Hex Style No. O.D. Thread Thread D STYLE 279P Union Reducing Tee Reducing on ranch 279P06X04 3 /8 x 1 / STYLE 282P ulkhead Union 282P04 1 /4 3 / P05 5 /16 7 / P06 3 /8 1 / P08 1 /2 11 / D STYLE 282P ulkhead Union Poly-Flo to Standard ompression 282P04 1 /4 3 / P06 3 /8 1 / D 30

33 Poly-Flo Flareless Tube Fittings Material: rass Wrench Part Tube Pipe ulkhead Pad/Hex Style No. O.D. Thread Thread D STYLE 282PT ulkhead Union Straight Through 282PT04 1 /4 3 / PT05 5 /16 7 / PT06 3 /8 1 / D STYLE 292P Quick Disconnect Fitting When tube is disconnected, check valve shuts off flow. 292P04X02 1 /4 1 / P04X04 1 /4 1 / P05X02 5 /16 1 / P06X04 3 /8 1 /

34 Tube Fittings Poly-Flo Flareless Material: rass Wrench Part Tube Pipe Pad/Hex Style No. O.D. Thread STYLE 293P Quick Disconnect Fitting 293P04X04 1 /4 x 1 / Poly-Flo fitting on one end, other end connects directly to another Poly-Flo fitting. When straight end is disconnected from Poly-Flo fitting, the quick disconnect maintains pressure in the line. STYLE 296P Union Poly-Flo to Solder 296P04X06 1 /4 x 3 / P06X08 3 /8 x 1 / STYLE 297P Tube End Reducer 297P06X04 3 /8 x 1 / P08X06 1 /2 x 3 /

35 Tube Fittings Poly-Flo Kwik-onnect ouplers Material: rass Finish: hrome-plated Wrench Part Tube Pipe ulkhead Pad/Hex Style No. O.D. Thread Thread D STYLE 294P oupler Single End Shut-Off 294P04 1 /4 1 / P06 3 /8 11 / STYLE 294P ody Double End Shut-Off 294P04 1 /4 1 / P06 3 /8 11 / STYLE 294PD oupler Double End Shut-Off 294PD04 1 /4 1 / PD06 3 /8 11 / STYLE 294PM Insert (Without Shut-Off. Used on double end shut-off models) 294PM04 1 /4 1 / PM06 3 /8 11 /

36 Tube Fittings Poly-Flo Kwik-onnect ouplers Material: rass Finish: hrome-plated Wrench Wrench Part Tube Pipe Pad/Hex Pad/Hex Style No. O.D. Thread D STYLE 294PMD Insert (With Shut-Off. Used on double end shut-off models) 294PMD04 1 / PMD06 3 / STYLE 298P oupler Single End Shut-Off 298P04X02 1 /4 1 / P04X04 1 /4 1 / P06X04 3 /8 1 / D STYLE 298PD oupler Double End Shut-Off 298PD04X02 1 /4 1 / PD04X04 1 /4 1 / PD06X04 3 /8 1 / D STYLE 298PT ody with Shut-Off (Standard on both double and single shut-off models) 298PT04X02 1 /4 1 / PT04X04 1 /4 1 / PT06X04 3 /8 1 /

37 Poly-Flo Kwik-onnect ouplers Tube Fittings Material: Stainless Steel Wrench Wrench Part Tube Pipe ulkhead Pad/Hex Pad/Hex Style No. O.D. Thread Thread D STYLE 294PSS ody Single End Shut-Off 294PSS04 1 /4 1 / PSS06 3 /8 11 / STYLE 294PMSS Insert Single End Shut-Off 294PMSS04 1 / PMSS06 3 / STYLE 294PMSSD Insert Double End Shut-Off ` 294PMSSD04 1 / PMSSD06 3 / STYLE 294PSS oupler Single End Shut-Off 294PSS04 1 /4 1 / PSS06 3 /8 11 /

38 Tube Fittings Poly-Flo Kwik-onnect ouplers Material: Stainless Steel Wrench Wrench Part Tube Pipe ulkhead Pad/Hex Pad/Hex Style No. O.D. Thread Thread D STYLE 294PSSD oupler Double End Shut-Off 294PSSD04 1 /4 1 / PSSD06 3 /8 11 / STYLE 298PSS oupler Single End Shut-Off 298PSS04X02 1 /4 1 / PSS04X04 1 /4 1 / PSS06X04 3 /8 1 / D STYLE 298PSSD oupler Double End Shut-Off 298PSSD04X02 1 /4 1 / PSSD04X04 1 /4 1 / PSSD06X04 3 /8 1 / D STYLE 298PTSS ody with Shut-Off (Standard on both double and single shut-off models) 298PTSS04X02 1 /4 1 / PTSS04X04 1 /4 1 / PTSS06X04 3 /8 1 /

39 Tube Fittings Omega-Flo Push-to-onnect/Push-to-Release Pneumatic Material: rass Min. Tube Wrench Part Tube Pipe Orifice Insert Pad/Hex Style No. O.D. Thread Size STYLE 262OF Union ody 262OF02 1 / OF5/32 5 / OF04 1 / OF05 5 / OF06 3 / OF08 1 / STYLE 264OF Union Tee 264OF02 1 / OF5/32 5 / OF04 1 / OF05 5 / OF06 3 / OF08 1 / STYLE 265OF Union Elbow 265OF02 1 / OF5/32 5 / OF04 1 / OF05 5 / OF06 3 / OF08 1 / STYLE 266OF Female onnector 266OF02X02 1 /8 1 / OF5/32X02 5 /32 1 / OF03X02 3 /16 1 / OF04X02 1 /4 1 / OF04X04 1 /4 1 / OF05X02 5 /16 1 / OF05X04 5 /16 1 / OF06X04 3 /8 1 / OF06X06 3 /8 3 /

40 Tube Fittings Omega-Flo Push-to-onnect/Push-to-Release Pneumatic Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 268OF Male onnector 268OF02X01 1 /8 1 / OF02X02 1 /8 1 / OF02X04 1 /8 1 / OF5/32X02 5 /32 1 / OF5/32X04 5 /32 1 / OF03X02 3 /16 1 / OF03X04 3 /16 1 / OF04X01 1 /4 1 / OF04X02 1 /4 1 / OF04X04 1 /4 1 / OF04X06 1 /4 3 / OF05X02 5 /16 1 / OF05X04 5 /16 1 / OF06X02 3 /8 1 / OF06X04 3 /8 1 / OF06X06 3 /8 3 / OF06X08 3 /8 1 / OF08X06 1 /2 3 / OF08X08 1 /2 1 / OF08X08 1 /2 1 / STYLE 269OF Male Elbow 269OF02X02 1 /8 1 / OF5/32X02 5 /32 1 / OF5/32X04 5 /32 1 / OF03X02 3 /16 1 / OF03X04 3 /16 1 / OF04X02 1 /4 1 / OF04X04 1 /4 1 / OF05X02 5 /16 1 / OF05X04 5 /16 1 / OF06X04 3 /8 1 / OF06X06 3 /8 3 / OF06X08 3 /8 1 / OF08X06 1 /2 3 / OF08X08 1 /2 1 / Min. Wrench Wrench Part Tube Pipe Orifice Pad/Hex Pad/Hex Style No. O.D. Thread Size D STYLE 269OFS Male Elbow Swivel D 269OFS02X02 1 /8 1 / OFS5/32X02 5 /32 1 / OFS5/32X04 5 /32 1 / OFS03X02 3 /16 1 / OFS03X04 3 /16 1 / OFS04X02 1 /4 1 / OFS04X04 1 /4 1 / OFS04X06 1 /4 3 / OFS05X02 5 /16 1 / OFS05X04 5 /16 1 / OFS06X02 3 /8 1 / OFS06X04 3 /8 1 / OFS06X06 3 /8 3 / OFS06X08 3 /8 1 / OFS08X06 1 /2 3 / OFS08X08 1 /2 1 /

41 Tube Fittings Omega-Flo Push-to-onnect/Push-to-Release Pneumatic Material: rass Min. Wrench Wrench Part Tube Pipe Orifice Pad/Hex Pad/Hex Style No. O.D. Thread Size D STYLE 271OFS Male Run Tee Swivel D 271OFS02X02 1 /8 1 / OFS5/32X02 5 /32 1 / OFS04X02 1 /4 1 / OFS04X04 1 /4 1 / OFS05X02 5 /16 1 / OFS05X04 5 /16 1 / OFS06X04 3 /8 1 / OFS06X06 3 /8 3 / OFS08X06 1 /2 3 / OFS08X08 1 /2 1 / STYLE 272OFS Male ranch Tee Swivel D 272OFS02X02 1 /8 1 / OFS5/32X02 5 /32 1 / OFS04X02 1 /4 1 / OFS04X04 1 /4 1 / OFS05X02 5 /16 1 / OFS05X04 5 /16 1 / OFS06X04 3 /8 1 / OFS06X06 3 /8 3 / OFS08X06 1 /2 3 / OFS08X08 1 /2 1 / Min. Wrench Wrench ulkhead Part Tube Pipe Orifice Pad/Hex Pad/Hex Thread Style No. O.D. Thread Size D STYLE 282OF ulkhead Union 282OF02 1 / / OF5/32 5 / / OF04 1 / / OF05 5 / / OF06 3 / / OF08 1 / /8-16 D E Omega-Flo ccessories Material: Polyethylene Part Tube Style No. O.D. STYLE 209OF Plug 209OF02 1 / OF5/32 5 / OF04 1 / OF05 5 / OF06 3 / OF08 1 /

42 Tube Fittings Hi-Duty Flareless Material: rass Min. Wrench ulkhead Part Tube Pipe Orifice Pad/Hex Thread Style No. O.D. Thread Size D E STYLE 66L ulkhead Female onnector 66L04X04 1 /4 1 / /4-18 D E STYLE 72L ulkhead Union E D 72L02 1 / / L04 1 / / L06 3 / /16-24 STYLE 81L Nut 81L02 1 / L03 3 / L04 1 / L05 5 / L06 3 / L08 1 / L10 5 / L12 3 / L STYLE 82L Union 82L02 1 / L03 3 / L04 1 / L05 5 / L06 3 / L08 1 / L10 5 /

43 Hi-Duty Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 84L Union Tee 84L02 1 / L03 3 / L04 1 / L06 3 / L08 1 / L10 5 / STYLE 85L Union Elbow 85L04 1 / L06 3 / L08 1 / L10 5 / STYLE 86L Female onnector 86L02X02 1 /8 1 / L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L06X02 3 /8 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L06X08 3 /8 1 / L08X06 1 /2 3 / L08X08 1 /2 1 /

44 Tube Fittings Hi-Duty Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 87L Reducing Union 87L04X03 1 /4 x 3 / L06X04 3 /8 x 1 / L08X04 1 /2 x 1 / L08X06 1 /2 x 3 / STYLE 88L Male onnector 88L02X02 1 /8 1 / L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L04X06 1 /4 3 / L04X08 1 /4 1 / L05X02 5 /16 1 / L05X04 5 /16 1 / L06X02 3 /8 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L06X08 3 /8 1 / L08X04 1 /2 1 / L08X06 1 /2 3 / L08X08 1 /2 1 / L08X12 1 /2 3 / L10X06 5 /8 3 / L10X08 5 /8 1 / L10X12 5 /8 3 / L12X08 3 /4 1 / L12X12 3 /4 3 / L16X

45 Hi-Duty Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 89L Male Elbow D 89L02X02 1 /8 1 / L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L04X06 1 /4 3 / L05X02 5 /16 1 / L05X04 5 /16 1 / L06X02 3 /8 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L06X08 3 /8 1 / L08X04 1 /2 1 / L08X06 1 /2 3 / L08X08 1 /2 1 / L10X06 5 /8 3 / L10X08 5 /8 1 / L12X12 3 /4 3 / STYLE 90L Female Elbow 90L02X02 1 /8 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L06X02 3 /8 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L08X06 1 /2 3 / L08X08 1 /2 1 / D 43

46 Tube Fittings Hi-Duty Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 91L Male Run Tee 91L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / D STYLE 92L Male ranch Tee 92L02X02 1 /8 1 / L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L08X06 1 /2 3 / D STYLE 94L 45 Male Elbow 94L02X02 1 /8 1 / L03X02 3 /16 1 / L04X02 1 /4 1 / L04X04 1 /4 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L08X06 1 /2 3 / D 44

47 Hi-Duty Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 95L Female ranch Tee 95L04X02 1 /4 1 / L04X04 1 /4 1 / L06X04 3 /8 1 / L06X06 3 /8 3 / L08X06 1 /2 3 / L10X08 5 /8 1 / L12X08 3 /4 1 / D STYLE 99L Plug 99L02 1 / L04 1 / L06 3 / L08 1 /

48 Tube Fittings Flex Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 60FL Nitrile Sleeve 250 F max 60FL02 1 / FL03 3 / FL04 1 / FL05 5 / FL06 3 / FL08 1 / FL10 5 / FL12 3 / FL16 1 STYLE 60FLV Viton Sleeve 450 max 60FLV03 3 / FLV04 1 / FLV05 5 / FLV06 3 / FLV08 1 / FLV10 5 / FLV12 3 / STYLE 61FL Nut 61FL02 1 / FL03 3 / FL04 1 / FL05 5 / FL06 3 / FL08 1 / FL10 5 / FL12 3 / FL16 1 STYLE 62FL Union 62FL02 1 / FL03 3 / FL04 1 / FL05 5 / FL06 3 /

49 Flex Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 63FL Male onnector heck 63FL04X02 1 /4 1 / STYLE 64FL Union Tee 64FL04 1 / FL06 3 / STYLE 66FL Female onnector 66FL02X02 1 /8 1 / FL04X02 1 /4 1 / FL05X02 5 /16 1 / FL06X04 3 /8 1 / FL08X06 1 /2 3 / STYLE 68FL Male onnector 68FL02X02 1 /8 1 / FL03X02 3 /16 1 / FL04X02 1 /4 1 / FL04X04 1 /4 1 / FL05X02 5 /16 1 / FL05X04 5 /16 1 / FL06X02 3 /8 1 / FL06X04 3 /8 1 / FL06X06 3 /8 3 / FL08X06 1 /2 3 / FL08X08 1 /2 1 / FL10X08 5 /8 1 / STYLE 68FLV Male onnector with Viton Sleeve 68FLV03X02 3 /16 1 / FLV04X02 1 /4 1 / FLV06X06 3 /8 3 / FLV08X06 1 /2 3 /

50 Tube Fittings Flex Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 69FL Male Elbow D 69FL02X02 1 /8 1 / FL03X02 3 /16 1 / FL04X02 1 /4 1 / FL04X04 1 /4 1 / FL05X02 5 /16 1 / FL05X04 5 /16 1 / FL06X02 3 /8 1 / FL06X04 3 /8 1 / FL06X06 3 /8 3 / FL08X06 1 /2 3 / FL08X08 1 /2 1 / FL10X08 5 /8 1 / STYLE 69FLV Male Elbow with Viton Sleeve 69FLV04X04 1 /4 1 / FLV06X04 3 /8 1 / FLV06X06 3 /8 3 / D STYLE 71FL Male Run Tee 71FL04X02 1 /4 1 / FL04X04 1 /4 1 / D STYLE 72FL Male ranch Tee 72FL04X02 1 /4 1 / FL06X04 3 /8 1 / D 48

51 ompression Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 60F Sleeve 60F02 1 / F156 5 / F03 3 / F04 1 / F05 5 / F06 3 / F07 7 / F08 1 / F10 5 / F12 3 / STYLE 61F Nut 61F02 1 / F156 5 / F03 3 / F04 1 / F05 5 / F06 3 / F07 7 / F08 1 / F10 5 / F12 3 / STYLE 62F Union 62F02 1 / F156 5 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 /

52 Tube Fittings ompression Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 63F all heck 63F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / STYLE 64F Union Tee 64F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / STYLE 65F Union Elbow 65F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / STYLE 66F Female onnector 66F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 /

53 ompression Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 68F Male onnector 68F02X02 1 /8 1 / F02X04 1 /8 1 / F02X06 1 /8 3 / F03X02 3 /16 1 / F03X04 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F04X08 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F06X12 3 /8 3 / F08X02 1 /2 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F08X16 1 / F10X08 5 /8 1 / F10X12 5 /8 3 / F12X08 3 /4 1 / F12X12 3 /4 3 / STYLE 69F Male Elbow D 69F02X02 1 /8 1 / F02X04 1 /8 1 / F03X02 3 /16 1 / F03X04 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F04X08 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F06X12 3 /8 3 / F08X02 1 /2 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F10X08 5 /8 1 / F10X12 5 /8 3 / F12X08 3 /4 1 /

54 Tube Fittings ompression Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 70F Female Elbow D 70F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / STYLE 71F Male Run Tee 71F04X02 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / D STYLE 72F Male ranch Tee 72F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / D 52

55 ompression Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 76F Tee D 76F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F06X04 3 /8 1 / STYLE 80F Straight Through Tank Fitting 80F04X04 1 /4 1 / F06X06 3 /8 3 / F08X08 1 /2 1 / STYLE 161F Long Nut 161F04 1 / F06 3 / F08 1 /

56 Tube Fittings ompresamatic Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 61M Nut and Sleeve ssembly 61M02 1 / / M03 3 / / M04 1 / / M05 5 / / M06 3 / / M07 7 / / M08 1 / / M10 5 / / M12 3 / STYLE 62M Union 62M02 1 / M03 3 / M04 1 / M05 5 / M06 3 / M08 1 / M10 5 / M12 3 / STYLE 63M Male onnector all heck 63M02X02 1 /8 1 / M03X02 3 /16 1 / M04X02 1 /4 1 / M05X02 5 /16 1 / M06X04 3 /8 1 / M08X06 1 /2 3 /

57 ompresamatic Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 64M Union Tee 64M02 1 / M03 3 / M04 1 / M05 5 / M06 3 / M08 1 / M10 5 / M12 3 / STYLE 65M Union Elbow 65M02 1 / M03 3 / M04 1 / M05 5 / M06 3 / M08 1 / M10 5 / M12 3 /

58 Tube Fittings ompresamatic Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 66M Female onnector 66M02X02 1 /8 1 / M03X02 3 /16 1 / M03X04 3 /16 1 / M04X02 1 /4 1 / M04X04 1 /4 1 / M05X02 5 /16 1 / M05X04 5 /16 1 / M06X02 3 /8 1 / M06X04 3 /8 1 / M08X06 1 /2 3 / M08X08 1 /2 1 / M10X08 5 /8 1 / M12X08 3 /4 1 / Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 68M Male onnector 68M02X02 1 /8 1 / M02X04 1 /8 1 / M02X06 1 /8 3 / M03X02 3 /16 1 / M03X04 3 /16 1 / M04X02 1 /4 1 / M04X04 1 /4 1 / M04X06 1 /4 3 / M04X08 1 /4 1 / M05X02 5 /16 1 / M05X04 5 /16 1 / M06X02 3 /8 1 / M06X04 3 /8 1 / M06X06 3 /8 3 / M06X08 3 /8 1 / M06X12 3 /8 3 / M07X04 7 /16 1 / M08X02 1 /2 1 / M08X04 1 /2 1 / M08X06 1 /2 3 / M08X08 1 /2 1 / M08X12 1 /2 3 / M08X16 1 / M10X08 5 /8 1 / M10X12 5 /8 3 / M12X08 3 /4 1 / M12X12 3 /4 3 /

59 Tube Fittings ompresamatic Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 69M Male Elbow D 69M02X01 1 /8 1 / M02X02 1 /8 1 / M02X04 1 /8 1 / M02X06 1 /8 3 / M03X02 3 /16 1 / M03X04 3 /16 1 / M04X02 1 /4 1 / M04X04 1 /4 1 / M04X06 1 /4 3 / M04X08 1 /4 1 / M05X02 5 /16 1 / M05X04 5 /16 1 / M06X02 3 /8 1 / M06X04 3 /8 1 / M06X06 3 /8 3 / M06X08 3 /8 1 / M06X12 3 /8 3 / M07X04 7 /16 1 / M08X02 1 /2 1 / M08X04 1 /2 1 / M08X06 1 /2 3 / M08X08 1 /2 1 / M08X12 1 /2 3 / M10X08 5 /8 1 / M10X12 5 /8 3 / M12X08 3 /4 1 /

60 Tube Fittings ompresamatic Flareless Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D STYLE 70M Female Elbow D 70M02X02 1 /8 1 / M03X02 3 /16 1 / M04X02 1 /4 1 / M04X04 1 /4 1 / M05X02 5 /16 1 / M06X04 3 /8 1 / M08X06 1 /2 3 / M08X08 1 /2 1 / M10X08 5 /8 1 / STYLE 71M Male Run Tee 71M02X02 1 /8 1 / M03X02 3 /16 1 / M04X02 1 /4 1 / M05X02 5 /16 1 / M06X04 3 /8 1 / M08X06 1 /2 3 / D STYLE 72M Male ranch Tee D 72M02X02 1 /8 1 / M03X02 3 /16 1 / M04X02 1 /4 1 / M04X04 1 /4 1 / M05X02 5 /16 1 / M06X04 3 /8 1 / M08X06 1 /2 3 / M08X08 1 /2 1 / M10X08 5 /8 1 / M12X08 3 /4 1 / STYLE 73M Elbow heck 73M02X02 1 /8 1 / M03X02 3 /16 1 / M04X02 1 /4 1 / M06X04 3 /8 1 / D 58

61 ompresamatic Flareless Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size D E STYLE 74M 45 Male Elbow 74M08X06 1 /2 3 / M10X08 5 /8 1 / D STYLE 76M Tee E D 76M02X02 1 /8 1 / M04X02 1 /4 1 / M06X04 3 /8 1 / STYLE 80M Straight Through Tank Fitting 80M04X04 1 /4 1 / M06X06 3 /8 3 / M06X08 3 /8 1 / M08X08 1 /2 1 / STYLE 82M ulkhead Union E Straight Thread D ulkhead Thread 82M04 1 / / M06 3 / /

62 Tube Fittings 45 Flare Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 41F Union Nut Standard Length 41F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 41FS Union Nut Short Length 41FS02 1 / FS03 3 / FS04 1 / FS05 5 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / FS14 7 / STYLE 64 opper Seal ap / / / / /

63 45 Flare Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 511GS Short Nut 511GS04 1 / GS06 3 / GS08 1 / GS10 5 / STYLE 625F opper Flare Gasket 625F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 639F Plug 639F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 640F ap Nut 640F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 /

64 Tube Fittings 45 Flare Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 641F Long Forged Nut 641F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 641FS Short Forged Nut 641FS03 3 / FS04 1 / FS05 5 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / STYLE 641FSH Heavy Short Forged Nut 641FSH04 1 / FSH06 3 / FSH08 1 /

65 45 Flare Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 642F Union 642F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 643F all heck 643F03X02 3 /16 1 / F04X02 1 /4 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / STYLE 644F Union Tee 644F02 1 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 /

66 Tube Fittings 45 Flare Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 645F Male ranch Tee 645F04X02 1 /4 1 / F04X04 1 /4 1 / F05X04 5 /16 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 / F12X08 3 /4 1 / STYLE 646F Female onnector 646F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F06X12 3 /8 3 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F10X06 5 /8 3 / F10X08 5 /8 1 / F10X12 5 /8 3 / F12X12 3 /4 3 / STYLE 648F Male onnector F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F04X08 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F05X06 5 /16 3 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F06X12 3 /8 3 / F08X02 1 /2 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F10X04 5 /8 1 / F10X06 5 /8 3 / F10X08 5 /8 1 / F10X12 5 /8 3 / F12X08 3 /4 1 / F12X12 3 /4 3 /

67 45 Flare Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 649F Male Elbow 649F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F05X02 5 /16 1 / F05X04 5 /16 1 / F05X06 5 /16 3 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F10X06 5 /8 3 / F10X08 5 /8 1 / F10X12 5 /8 3 / F12X08 3 /4 1 / F12X12 3 /4 3 / STYLE 650F Female Elbow 650F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F05X04 5 /16 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 / F10X12 5 /8 3 /4 STYLE 651F Male Run Tee 651F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 / STYLE 653F Tee 653F06X04 3 /8 1 /

68 Tube Fittings 45 Flare Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 654F 45 Male Elbow 654F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F08X06 1 /2 3 / F10X08 5 /8 1 / F12X08 3 /4 1 / F12X12 3 /4 3 / STYLE 655F Union Elbow 655F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 656F Reducing Union 656F04X03 1 /4 x 3 / F05X04 5 /16 x 1 / F06X04 3 /8 x 1 / F08X04 1 /2 x 1 / F08X06 1 /2 x 3 / F10X06 5 /8 x 3 / F10X08 5 /8 x 1 / F12X08 3 /4 x 1 / STYLE 657F Reducing Union Elbow 657F08X06 1 /2 x 3 / F10X08 5 /8 x 1 / STYLE 660F Female Union Part number includes gaskets. 660F04 1 / F06 3 / F08 1 / F10 5 /

69 45 Flare Tube Fittings Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 661F Reducer 661F04X06 1 /4 x 3 / F04X08 1 /4 x 1 / F05X04 5 /16 x 1 / F05X06 5 /16 x 3 / F06X04 3 /4 x 1 / F06X05 3 /8 x 5 / F06X08 3 /8 x 1 / F08X04 1 /2 x 1 / F08X06 1 /2 x 3 / F08X10 1 /2 x 5 / F08X12 1 /2 x 3 / F10X08 5 /8 x 1 / F12X10 3 /4 x 5 / STYLE 662F Long Forged Reducing Nut 662F06X04 3 /8 x 1 / F08X06 1 /2 x 3 / Part Number includes Gaskets STYLE 662FS Short Forged Reducing Nut 662FS06X04 3 /8 x 1 / FS06X05 3 /8 x 5 / FS08X06 1 /2 x 3 / FS10X08 5 /8 x 1 / STYLE 664F Female oupling 664F04X02 1 /4 1 / F04X04 1 /4 1 / F06X04 3 /8 1 / Includes Gasket 67

70 Tube Fittings 45 Flare Material: rass Min. Wrench Part Tube Pipe Orifice Pad/Hex Style No. O.D. Thread Size STYLE 669F Female Flare Elbow 669F04X04 1 /4 x 1 / Part Number includes Gaskets STYLE 672FS Flare to Solder Union 672FS04X04 1 /4 1 / FS04X06 1 /4 3 / FS06X06 3 /8 3 / FS08X08 1 /2 1 / FS10X10 5 /8 5 / STYLE 673FS Swivel Flare Nut to Solder dapter 673FS04 1 / FS06 3 / FS08 1 / FS10 5 / dapts hard drawn tubing to a flare. STYLE 679F Female Swivel Elbow 679F06 3 / F08 1 /

71 Hi-Seal Fittings Material: Steel Part Tube Style No. O.D. T1 T2 D STYLE 708FS Fitting ap For capping tube end of any Hi-Seal fitting. (Includes captive sleeve). 708FS04 1 /4 1 / FS05 5 /16 9 / FS06 3 /8 5 / FS08 1 /2 3 / FS10 5 /8 15 / FS12 3 /4 1 1 / FS / STYLE 721FS Tubing ap Used with 760FS sleeve and 761FS nut for capping end of tube. STYLE 752FS ross Tube to Tube to Tube to Tube 721FS04 1 /4 1 / FS05 5 /16 9 / FS06 3 /8 5 / FS08 1 /2 3 / FS10 5 /8 15 / FS12 3 /4 1 1 / FS / cross Flats 752FS04 1 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / Part Tube Pipe Style No. O.D. Thread D E F G STYLE 754FS Male 45 Elbow Tube to Male Pipe Thread Swing cross Radius Flats 754FS04X02 1 /4 1 / FS06X04 3 /8 1 / FS08X06 1 /2 3 / FS10X08 5 /8 1 / FS12X12 3 /4 3 / FS16X STYLE 760FS Sleeve 760FS02 1 /8 760FS03 3 /16 760FS04 1 /4 760FS05 5 /16 760FS06 3 /8 760FS08 1 /2 760FS10 5 /8 760FS12 3 /4 760FS14 7 /8 760FS FS /4 69

72 Hi-Seal Fittings Material: Steel Part Tube Style No. O.D. T1 D E F G STYLE 761FS Nut 761FS02 1 /8 3 / FS03 3 /16 7 / FS04 1 /4 1 / FS05 5 /16 9 / FS06 3 /8 5 / FS08 1 /2 3 / FS10 5 /8 15 / FS12 3 /4 1 1 / FS14 7 /8 1 3 / FS / STYLE 762FS Union Tube to Tube 762FS02 1 / FS03 3 / FS04 1 / FS05 5 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / FS14 7 / FS FS / STYLE 764FS Union Tee Tube to Tube to Tube cross Flats 764FS04 1 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / FS STYLE 765FS Union Elbow Tube to Tube cross Flats 765FS02 1 / FS04 1 / FS05 5 / FS06 3 / FS08 1 / FS10 5 / FS12 3 / FS14 7 / FS

73 Hi-Seal Fittings Material: Steel Part Tube Pipe Style No. O.D. Thread D E F G STYLE 766FS Female onnector Tube to Female Pipe Thread 766FS02X02 1 /8 1 / FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS05X02 5 /16 1 / FS05X04 5 /16 1 / FS06X04 3 /8 1 / FS06X06 3 /8 3 / FS08X04 1 /2 1 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS10X08 5 /8 1 / FS12X08 3 /4 1 / FS12X12 3 /4 3 / FS14X12 7 /8 3 / FS16X STYLE 767FS Female Run Tee Tube to Female Pipe Thread to Tube cross Swing ody Flats Radius (SR) 767FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS06X04 3 /8 1 / FS08X06 1 /2 3 / FS12X12 3 /4 3 / FS16X STYLE 768FS Male onnection Tube to Male Pipe Thread 768FS02X02 1 /8 1 / FS03X02 3 /16 1 / FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS04X06 1 /4 3 / FS04X08 1 /4 1 / FS05X02 5 /16 1 / FS05X04 5 /16 1 / FS06X02 3 /8 1 / FS06X04 3 /8 1 / FS06X06 3 /8 3 / FS06X08 3 /8 1 / FS06X12 3 /8 3 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS08X12 1 /2 3 / FS10X06 5 /8 3 / FS10X08 5 /8 1 / FS10X12 5 /8 3 / FS12X06 3 /4 3 / FS12X08 3 /4 1 / FS12X12 3 /4 3 / FS14X12 7 /8 3 / FS16X / FS16X

74 Hi-Seal Fittings Material: Steel Swing Part Tube Pipe Radius Style No. O.D. Thread D E F (SR) STYLE 769FS Male Elbow Tube to Male Pipe Thread 769FS02X02 1 /8 1 / FS03X02 3 /16 1 / FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS04X06 1 /4 3 / FS05X02 5 /16 1 / FS05X04 5 /16 1 / FS06X02 3 /8 1 / FS06X04 3 /8 1 / FS06X06 3 /8 3 / FS06X08 3 /8 1 / FS06X12 3 /8 3 / FS08X04 1 /2 1 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS08X12 1 /2 3 / FS10X06 5 /8 3 / FS10X08 5 /8 1 / FS12X08 3 /4 1 / FS12X12 3 /4 3 / FS14X12 7 /8 3 / FS16X / FS16X STYLE 770FS Female Elbow Tube to Female Pipe Tube 770FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS06X04 3 /8 1 / FS06X06 3 /8 3 / FS06X08 3 /8 1 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS10X08 5 /8 1 / FS12X08 3 /4 1 / FS12X12 3 /4 3 / FS16X STYLE 771FS Male Run Tee Tube to Male Pipe Thread to Tube Swing cross Radius Flats (SR) 771FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS06X04 3 /8 1 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS12X12 3 /4 3 /

75 Hi-Seal Fittings Material: Steel Swing Part Tube Pipe Radius Style No. O.D. Thread D E (SR) STYLE 772FS Male ranch Tee Tube to Tube to Male Pipe Thread cross Flats 772FS04X02 1 /4 1 / FS04X04 1 /4 1 / FS05X02 5 /16 1 / FS06X04 3 /8 1 / FS08X06 1 /2 3 / FS08X08 1 /2 1 / FS10X08 5 /8 1 / FS12X12 3 /4 3 / STYLE 777FS Female ranch Tee Tube to Tube to Female Pipe Thread Swing cross Radius Flats (SR) 777FS06X04 3 /8 1 / FS08x06 1 /2 3 / FS10X08 5 /8 1 / FS12X12 3 /4 3 / FS16X Part Tube Style No. O.D. T1 D E STYLE 782FS ulkhead Union Tube to Tube Max. ulkhead 782FS04 1 /4 1 / FS06 3 /8 5 / FS08 1 /2 3 / FS12 3 /4 1 1 / Part Tube O.D. Style No. Hi-Seal N T1 T2 D E STYLE 792FS dapter Hi-Seal to N Thread Drill Drill 792FS04 1 /4 1 /4 1 / / FS06 3 /8 3 /8 5 / / FS08 1 /2 1 /2 3 / / FS / /

76 Hi-Seal Fittings Material: Steel/O-Ring Part Tube Style No. O.D. T1 D E F G STYLE 768FSO Male onnector Tube to Straight Thread 768FSO04 1 /4 7 / FSO06 3 /8 9 / FSO08 1 /2 3 / FSO10 5 /8 7 / FSO12 3 /4 1 1 / FSO14 7 /8 1 3 / FSO / STYLE 769FSO Male Elbow Tube to Straight Thread Swing cross Radius Flats (SR) 769FSO04 1 /4 7 / FSO06 3 /8 9 / FSO08 1 /2 3 / FSO10 5 /8 7 / FSO12 3 /4 1 1 / FSO14 7 /8 1 3 / FSO / STYLE 771FSO Male Run Tee Tube to Straight Thread to Tube Swing cross Radius Flats (SR) 771FSO04 1 /4 7 / FSO06 3 /8 9 / FSO08 1 /2 3 / STYLE 772FSO Male ranch Tee Tube to Tube to Straight Thread Swing cross Radius Flats (SR) 772FSO04 1 /4 7 / FSO06 3 /8 9 / FSO12 3 /4 1 1 /

77 Hi-Seal Fittings Material: Stainless Steel Part Tube Style No. O.D. T1 D E F G STYLE 708FSS Fitting ap 708FSS02 1 /8 3 / FSS04 1 /4 1 / FSS06 3 /8 5 / FSS08 1 /2 3 / FSS10 5 /8 15 / FSS12 3 /4 1 1 / STYLE 711FSS Lock Nut 711FSS04 1 /4 1 / FSS06 3 /8 5 / T1 STYLE 721FSS Tubing ap 721FSS04 1 /4 1 / FSS06 3 /8 5 / FSS08 1 /2 3 / FSS12 3 /4 1 1 / STYLE 722FSS dapter Straight Tube to Male Pipe Thread 722FSS04X04 1 /4 1 / FSS06X04 3 /8 1 / FSS08X04 1 /2 1 / STYLE 752FSS ross Tube to Tube to Tube to Tube cross Flats 752FSS04 1 / FSS06 3 / FSS08 1 /

78 Hi-Seal Fittings Material: Stainless Steel Part Tube Pipe Style No. O.D. Thread D E F G STYLE 754FSS Male 45 Elbow Tube to Male Pipe Thread Swing cross Radius Flats 754FSS04X02 1 /4 1 / FSS06X04 3 /8 1 / FSS08X06 1 /2 3 / STYLE 756FSS Reducing Union Tube to Tube T1 T2 756FSS04X02 1 /4 x 1 / / / FSS06X04 3 /8 x 1 / / / FSS08X04 1 /2 x 1 / / / FSS08X06 1 /2 x 3 / / /8-18 STYLE 760FSS Sleeve 760FSS02 1 /8 760FSS03 3 /16 760FSS04 1 /4 760FSS05 5 /16 760FSS06 3 /8 760FSS08 1 /2 760FSS10 5 /8 760FSS12 3 /4 760FSS16 1 STYLE 760FT Teflon Sleeve 760FT02 1 /8 760FT04 1 /4 STYLE 760FPH Sleeve 17-4 PH 760FPH02 1 /8 760FPH04 1 /4 760FPH06 3 /8 760FPH08 1 /2 760FPH12 3 /4 760FPH16 1 Teflon is a registered trademark of E.I.DuPont DeNemours &o., Inc. 76

79 Hi-Seal Fittings Material: Stainless Steel Part Tube Style No. O.D. T1 D E F G STYLE 761FSS Nut 761FSS02 1 /8 3 / FSS03 3 /16 7 / FSS04 1 /4 1 / FSS05 5 /16 9 / FSS06 3 /8 5 / FSS08 1 /2 3 / FSS10 5 /8 15 / FSS12 3 /4 1 1 / FSS / Part Tube Pipe Style No. O.D. Thread D E F G STYLE 762FSS Lock Nut 762FSS01 1 / FSS02 1 / FSS03 3 / FSS04 1 / FSS05 5 / FSS06 3 / FSS08 1 / FSS10 5 / FSS12 3 / FSS14 7 / FSS STYLE 764FSS Union Tee Tube to Tube to Tube cross Flats 764FSS02 1 / FSS04 1 / FSS05 5 / FSS06 3 / FSS08 1 / FSS10 5 / FSS12 3 / FSS STYLE 765FSS Union Elbow Tube to Tube cross Flats 765FSS02 1 / FSS04 1 / FSS05 5 / FSS06 3 / FSS08 1 / FSS10 5 / FSS12 3 / FSS

80 Hi-Seal Fittings Material: Stainless Steel Part Tube Pipe Style No. O.D. Thread D E F G STYLE 766FSS Female onnector Tube to Female Pipe Thread 766FSS02X02 1 /8 1 / FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS05X04 5 /16 1 / FSS06X02 3 /8 1 / FSS06X04 3 /8 1 / FSS06X06 3 /8 3 / FSS06X08 3 /8 1 / FSS08X04 1 /2 1 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 / FSS10X08 5 /8 1 / FSS12X12 3 /4 3 / FSS16X STYLE 767FSS Female Run Tee Tube to Female Pipe Thread to Tube Swing cross Radius Flats (SR) 767FSS04X04 1 /4 1 / FSS06X04 3 /8 1 / STYLE 768FSS Male onnector Tube to Male Pipe Thread 768FSS02X02 1 /8 1 / FSS02X04 1 /8 1 / FSS03X02 3 /16 1 / FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS04X06 1 /4 3 / FSS04X08 1 /4 1 / FSS05X02 5 /16 1 / FSS05X04 5 /16 1 / FSS06X02 3 /8 1 / FSS06X04 3 /8 1 / FSS06X06 3 /8 3 / FSS06X08 3 /8 1 / FSS06X12 3 /8 3 / FSS08X04 1 /2 1 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 / FSS08X12 1 /2 3 / FSS10X08 5 /8 1 / FSS12X08 3 /4 1 / FSS12X12 3 /4 3 / FSS16X /

81 Hi-Seal Fittings Material: Stainless Steel Part Tube Pipe Style No. O.D. Thread D E F G STYLE 769FSS Male Elbow Tube to Male Pipe Thread Swing cross Radius Flats (SR) 769FSS02X02 1 /8 1 / FSS02X04 1 /8 1 / FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS05X02 5 /16 1 / FSS05X04 5 /16 1 / FSS06X02 3 /8 1 / FSS06X04 3 /8 1 / FSS06X06 3 /8 3 / FSS06X08 3 /8 1 / FSS08X04 1 /2 1 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 / FSS10X08 5 /8 1 / FSS12X12 3 /4 3 / FSS16X STYLE 770FSS Female Elbow Tube to Female Pipe Tube Swing cross Radius Flats (SR) 770FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS06X04 3 /8 1 / FSS06X06 3 /8 3 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 /

82 Hi-Seal Fittings Material: Stainless Steel Part Tube Pipe Style No. O.D. Thread D E G STYLE 771FSS Male Run Tee Tube to Male Pipe Thread to Tube Swing cross Radius Flats (SR) 771FSS01X02 1 /16 1 / FSS02X02 1 /8 1 / FSS03X02 3 /16 1 / FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS05X02 5 /16 1 / FSS06X04 3 /8 1 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 / FSS10X08 5 /8 1 / FSS12X12 3 /4 3 / FSS14X12 7 /8 3 / FSS16X FSS20X /4 1 1 / STYLE 772FSS Male ranch Tee Tube to Tube to Male Pipe Thread cross Swing Flats Radius 772FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS06X04 3 /8 1 / FSS08X06 1 /2 3 / FSS08X08 1 /2 1 /

83 Hi-Seal Fittings Material: Stainless Steel Part Tube Pipe Style No. O.D. Thread D E G STYLE 777FSS Female ranch Tee Tube to Tube to Female Pipe Thread Swing Radius (SR) 777FSS04X04 1 /4 1 / FSS06X04 3 /8 1 / FSS08X06 1 /2 3 / STYLE 780FSS Thermocouple onnector 780FSS02X02 1 /8 1 / FSS03X02 3 /16 1 / FSS03X04 3 /16 1 / FSS04X02 1 /4 1 / FSS04X04 1 /4 1 / FSS06X06 3 /8 3 / FSS08X08 1 /2 1 /

84 Hi-Seal Fittings Material: Stainless Steel Part Tube Style No. O.D. T1 D E F STYLE 782FSS ulkhead Union Tube to Tube Max. ulkhead ulkhead Thread 782FSS04 1 /4 1 / / FSS06 3 /8 5 / / FSS08 1 /2 3 / /4-16 STYLE 786FSS ulkhead Female onnector Tube to Female Pipe Thread Max. ulkhead ulkhead Thread 786FSS04X04 1 /4 1 / / FSS06X04 3 /8 1 / /8-18 STYLE 788FSS ulkhead Male onnector Tube to Male Pipe Thread Max. ulkhead ulkhead Thread 788FSS04X04 1 /4 1 / /

85 Sleeves & Nuts Hi-Seal raze-seal Fittings Material: Steel & Stainless Steel Part Tube Style No. O.D. T1 STYLE 760FSZ raze-seal Sleeve Material: Steel 760FSZ04 1 / FSZ06 3 / FSZ08 1 / FSZ12 3 / FSZ14 7 / FSZ FSZ / STYLE 760FSSZ raze-seal Sleeve Material: Stainless Steel 760FSSZ04 1 / FSSZ06 3 / FSSZ08 1 / STYLE 761FSZ raze-seal Nut Material: Steel 761FSZ04 1 /4 1 / FSZ06 3 /8 5 / FSZ08 1 /2 3 / FSZ12 3 /4 1 1 / FSZ14 7 /8 1 3 / FSZ / FSZ /2 1 7 / STYLE 761FSSZ raze-seal Nut Material: Stainless Steel 761FSSZ04 1 /4 1 / FSSZ06 3 /8 5 / FSSZ08 1 /2 3 / FSSZ10 5 /8 15 / FSSZ12 3 /4 1 1 /

86 Hi-Seal Fittings Material: rass Part Tube Style No. O.D. T1 D E F G STYLE 708F Fitting ap 708F04 1 /4 1 / F06 3 /8 5 / F08 1 /2 3 / F10 5 /8 15 / STYLE 711F Lock Nut T1 711F04 1 /4 1 / F06 3 /8 5 / F08 1 /2 3 / STYLE 721F Tubing ap 721F04 1 /4 1 / F06 3 /8 5 / F08 1 /2 3 / STYLE 754F Male 45 Elbow Tube to Male Pipe Thread Swing cross Radius Flats 754F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / STYLE 756F Reducing UnionTube to Tube T1 T2 756F04X02 1 /4 x 1 / / / F06X04 3 /8 x 1 / / / F08X04 1 /2 x 1 / / / F08X06 1 /2 x 3 / / / F12X08 3 /4 x 1 / / /4-16 STYLE 760F Sleeve F02 1 /8 760F03 3 /16 760F04 1 /4 760F05 5 /16 760F06 3 /8 760F08 1 /2 760F10 5 /8 760F12 3 /4 760F16 1

87 Hi-Seal Fittings Material: rass Part Tube Style No. O.D. T1 D E F G STYLE 761F Nut STYLE 762F Union Tube to Tube 761F02 1 /8 3 / F03 3 /16 7 / F04 1 /4 1 / F05 5 /16 9 / F06 3 /8 5 / F08 1 /2 3 / F10 5 /8 15 / F12 3 /4 1 1 / F / F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / F14 7 / Part Tube Pipe Style No. O.D. Thread D E F G STYLE 763F Male onnector heck Valve Tube to Male Pipe Thread 763F04x02 1 /4 1 / F06x04 3 /8 1 / STYLE 764F Union Tee Tube to Tube to Tube cross Flats 764F02 1 / F03 3 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / STYLE 765F Union Elbow Tube to Tube cross Flats 765F02 1 / F04 1 / F05 5 / F06 3 / F08 1 / F10 5 / F12 3 / F14 7 / F

88 Hi-Seal Fittings Material: rass Part Tube Pipe Style No. O.D. Thread D E F G STYLE 766F Female onnector Tube to Female Pipe Thread 766F02X02 1 /8 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X08 1 /4 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 / F12X08 3 /4 1 / F12X12 3 /4 3 / STYLE 767F Female Run Tee Tube to Female Pipe Thread to Tube Swing cross Radius Flats (SR) 767F04X02 1 /4 1 / F04X04 1 /4 1 / F06X04 3 /8 1 / STYLE 768F Male onnector Tube to Male Pipe Thread F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F04X08 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F05X06 5 /16 3 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F08X12 1 /2 3 / F10X06 5 /8 3 / F10X08 5 /8 1 / F12X08 3 /4 1 / F12X12 3 /4 3 / F14X12 7 /8 3 / F16X / F16X

89 Hi-Seal Fittings Material: rass Part Tube Pipe Style No. O.D. Thread D E F G STYLE 769F Elbow Tube to Male Pipe Thread Swing cross Radius Flats (SR) 769F02X02 1 /8 1 / F03X02 3 /16 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F04X06 1 /4 3 / F04X08 1 /4 1 / F05X02 5 /16 1 / F05X04 5 /16 1 / F06X02 3 /8 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F06X08 3 /8 1 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F10X08 5 /8 1 / F12X08 3 /4 1 / F12X12 3 /4 3 / F16X STYLE 770F Elbow Tube to Female Pipe Thread Swing cross Radius Flats (SR) 770F02X02 1 /8 1 / F04X02 1 /4 1 / F04X04 1 /4 1 / F06X04 3 /8 1 / F06X06 3 /8 3 / F08X04 1 /2 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / F12X12 3 /4 3 /

90 Hi-Seal Fittings Material: rass Part Tube Pipe Style No. O.D. Thread D E G STYLE 771F Male Run Tee Tube to Male Pipe Thread to Tube Swing cross Radius Flats (SR) 771F04X02 1 /4 1 / F04X04 1 /4 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 / STYLE 772F Male ranch Tee Tube to Tube to Male Pipe Thread Swing cross Radius Flats (SR) 772F04X02 1 /4 1 / F04X04 1 /4 1 / F05X02 5 /16 1 / F06X04 3 /8 1 / F08X06 1 /2 3 / F08X08 1 /2 1 /

91 Hi-Seal Fittings Material: rass Part Tube Pipe Style No. O.D. Thread D E F STYLE 773F Male Elbow heck Tube to Male Pipe Thread Swing cross Radius Flats (SR) 773F04X02 1 /4 1 / STYLE 777F Female ranch Tee Tube to Tube to Female Pipe Thread Swing cross Radius Flats (SR) 777F04X02 1 /4 1 / F04X04 1 /4 1 / F06X04 3 /8 1 / F12X12 3 /4 3 /

92 Hi-Seal Fittings Material: rass Part Tube Pipe Style No. O.D. Thread D E F G STYLE 780F Thermocouple onnector 780F04X02 1 /4 1 / F04X04 1 /4 1 / Part Tube ulkhead Style No. O.D. Thread D E F G STYLE 782F ulkhead Union Tube to Tube Max. ulkhead 782F02 1 /8 3 / / F04 1 /4 1 / / F05 5 /16 9 / F06 3 /8 5 / / F08 1 /2 3 / / F10 5 /8 15 / F12 3 /4 1 1 /

93 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 100 Elbow / / / / STYLE 101 Tee / / / / STYLE 102 ross / / / / STYLE 103 oupling / / / /

94 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 104 Union / / / / STYLE 108 ap / / / / STYLE 109 Plug / / / /

95 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 110 ushing 11004X02 1 /4 1 / X02 3 /8 1 / X04 3 /8 1 / X02 1 /2 1 / X04 1 /2 1 / X06 1 /2 3 / X06 3 /4 3 / X08 3 /4 1 / STYLE 111 Lock Nut / / / / T1 STYLE 112 Short Nipple / * / * / * / *Longer than ST or standard length 93

96 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 113 Long Nipple 11302X24 1 / X24 1 / X24 3 / X24 1 / X32 1 / X32 1 / X32 3 / X32 1 / X40 1 / X40 1 / X40 3 / X40 1 / X48 1 / X48 1 / X48 3 / X48 1 / X56 1 / X56 1 / X56 3 / X56 1 / STYLE 116 Street Elbow / / / / STYLE 117 Plug (Slotted Heads) / / / STYLE 119 Reducing ushing Female to Female 11904X02 1 /4 1 / X04 3 /8 1 / X06 1 /2 3 /

97 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 120 dapter 12002X02 1 /8 1 / X02 1 /4 1 / X04 1 /4 1 / X04 3 /8 1 / X06 1 /2 3 / STYLE 121 Plug / / / / / STYLE 122 Hex Nipple / / / / STYLE 123 Reducing Nipple 12304X02 1 /4 1 / X04 3 /8 1 / STYLE Street Elbow / / / /

98 Pipe Fittings Material: rass Min. Wrench Part Orifice Pad/Hex Style No. T1 T2 Size STYLE 126 Elbow / STYLE 127 Male Run Tee / / / STYLE 128 Reducing Street Elbow 12804X02 1 /4 1 / STYLE 129 ulkhead dapter ulkhead Thread 12902X24 1 /8 5 / X15 1 /4 3 / X24 1 /4 3 / X21 3 / X24 1 /2 1 1 / STYLE 130 lamping Stud Male NPTF to Male NPTF and Female NPTF ulkhead Thread 13008X04X35 1 /2 1 /4 3 / X04X41 1 /2 1 /4 3 /

99 Reference Data Decimal and Metric Equivalent of Fractions Decimal Metric Decimal Metric

100 Thermoplastic Tubing urst vs. Temperature Data IMPOLENE TUING 1000 urst Versus Temperature -IMPOLENE PY ND PP LK MINIMUM URST PRESSURE. PSI ,33,44,55,66, PY & PPK 88PY & 88PPK TEMPERTURE ( F), SUGGESTED WORKING PRESSURE IS 1/4 OF URST PRESSURE T THE SYSTEM OPERTING TEMPERTURE 3000 urst Versus Temperature -NYLO SEL NT, NH, SNK, NSRK, ND NF TUING NH & NSRK (EXEPT 88 SIZE) 2500 MINIMUM URST PRESSURE. PSI NH & 88NSRK NT & SNK - LL SIZES NF - LL SIZES TEMPERTURE ( F), SUGGESTED WORKING PRESSURE IS 1/4 OF URST PRESSURE T THE SYSTEM OPERTING TEMPERTURE 98

101 Thermoplastic Tubing urst vs. Temperature Data POLY-FLO TUING 450 urst Versus Temperature - POLY -FLO P, PE, PF TUING 400 MINIMUM URST PRESSURE. PSI P, PE, PF 66 P, PE, PF 88 P, PE, PF TEMPERTURE ( F), SUGGESTED WORKING PRESSURE IS 1/4 OF URST PRESSURE T THE SYSTEM OPERTING TEMPERTURE PV LER TUING 250 urst Versus Temperature - PV TUING 44PVLR MINIMUM URST PRESSURE. PSI PVLR 88PVLR TEMPERTURE ( F), SUGGESTED WORKING PRESSURE IS 1/4 OF URST PRESSURE T THE SYSTEM OPERTING TEMPERTURE 99

102 Thermoplastic Tubing Poly-Flo, PE (NSF pproved) Linear Low Density Polyethylene Tubing urst Working Weight Tube Wall Pressure Pressure Min. end (pprox.) Part Tube O.D. Thickness at 73 F at 73 F Radius Per Ft. No. (Inches) (Inches) (PSI) (PSI) (Inches) (Lbs.) 22PE 1/ / PE 5/ / PE 3/ / PE 1/ PE 3/ / PE 1/ / Impolene Poly-Flo, P lack (Non-NSF pproved) Linear Low Density Polyethylene Tubing 22P 1/ / P 5/ / P 3/ / P 1/ P 5/ / P 3/ / P 1/ / POLY-FLO Poly-Flo, PF lack (Non-NSF pproved) Flame Retardent Tubing 44PF 1/ PF 3/ / PF 1/ / Linear Low Density Polyethylene Tubing POLY-FLO Impolene, PY (NSF pproved) Polyallomer Tubing 22PY 1/ / PY 3/ / PY 1/ PY 3/ / PY 1/ / Impolene Impolene, PP lack (Non-NSF pproved) Polyallomar Tubing lack 22PP 1/ / PP 3/ / PP 1/ PP 3/ / PP 1/ / Impolene 100

103 Thermoplastic Tubing PPLITIONS PERFORMNE DT Usual Service Part olors and No. vailable Temperature Range onstruction/onformances 22PE Natural For pneumatic lines, instrumentation Resists most solvents and Natural: STM D-1248, 532PE Natural systems, water piping and limited chemicals. Withstands more than Type 1, lass, 33PE Natural food service. 500 hours in Igepal solution. ategory 3 44PE Natural, lue, Red, Federal Spec: LP390, Green, Orange, Temperature Range: Type 1, lass L, Grade 2, Purple, Gray, Yellow 80 F to +175 F ategory 3 66PE Natural, lue, Red olors: STM D-124, Green, Orange, Type 1, lass, Purple, Gray, Yellow ategory 3 88PE Natural Federal Spec: LP 370, Type 1, lass L, Grade 2, ategory 3 Flexible Tubing 22P lack For pneumatic lines, instrumentation Resists most solvents and STM D-1248, Type 1, 532P lack systems and water piping. chemicals. Withstands more lass, ategory 4 33P lack than 500 hours in Igepal solution. Federal Spec: LP-390, 44P lack Temperature Range: Type 3, lass L, Grade 2, 55P lack 80 F to +175 F ategory 4 66P lack Flexible Tubing lack Tubing offers outstanding resistance to sunlight 88P lack 44PF lack For heating control systems in Highest resistance to Flammability characteristic: 66PF lack commercial building, chemical environmental stress cracking Maximum allowable 88PF lack conduit, data control equipment of all regular polyethylene resins. burning rate for systems. Ideal in gas and liquid Withstands more than 500 hours PF tubing=3.9 cm/min per conducting applications. in Igepal solution. STM D635 Flexible Tubing Temperature Range: 80 F to +175 F 22PY White For instrumentation, pneumatic and Excellent corrosion resistances. an be repeatedly steam 33PY White lubricant lines, hydraulic lines, It can be used with greater range stabilized. 44PY White process lines forgases, chemicals, of liquids and gases than nylon Not subject to environmental 66PY White and solvents. Ideal for use at or polyethylene. Good acid and stress cracking. 88PY White higher temps. Limited food service. chemical resistance. Flexible Tubing Temperature Range: 20 F to +212 F 22PP lack For instrumentation, pneumatic and Excellent corrosion resistances. an be repeatedly steam 33PP lack lubricant lines, process lines for It can be used with greater range stabilized. 44PP lack gases, chemicals and solvents. of liquids and gases than nylon Not subject to environmental 66PP lack Ideal for use at higher temps. or polyethylene. Withstands stress cracking. 88PP lack boiling sulfuric acid, concentrated lack tubing offers Temperature Range: hydrochloric acid up to the boiling outstanding resistance to 20 F to +212 F point and saline solution up to sunlight. 200 F. Flexible Tubing 101

104 Thermoplastic Tubing Nylo-Seal, NH & NT (NSF pproved) Nylon 11 Tubing urst Working Weight Tube Wall Pressure Pressure Min. end (pprox.) Part Tube O.D. Thickness at 73 F at 73 F Radius Per Ft. No. (Inches) (Inches) (PSI) (PSI) (Inches) (Lbs.) 22NT 1/ , / NT 5/ , / NT 3/ , / NT 1/ , NT 5/ , / NT 3/ , / NT 1/ , / NH 1/ , / NH 3/ , / NH 1/ , / NH 3/ , / NH 1/ , / Nylo-Seal, SN & NSR (Non-NSF pproved) lack Nylon 11 Tubing NYLO-SEL 22SN 1/ , / SN 5/ , / SN 3/ , / SN 1/ , SN 5/ , / SN 3/ , / SN 1/ , / NSR 1/ , / NSR 3/ , / NSR 1/ , / NSR 3/ , / NSR 1/ , / Nylo-Seal, NF (Non-NSF pproved)plasticized Tubing Nylon 11 Tubing NYLO-SEL 22NF 1/ , / NF 5/ , / NF 3/ , / NF 1/ , / NF 5/ , / NF 3/ , / NF 1/ , NF 1/ , / NF 3/ , / Polyvinyl hloride (Non-NSF pproved) PV Tubing 44PV 1/ / PV 3/ PV 1/ Style 6 ir rake Tubing SE J844 DOT FMVSS 106 HYTRON IR RKE TUIN 602 1/ , / / / / / / / / / / /

105 22NT Natural For instrumentation lines, lubrication Resists vermin attack. Moisture not required for 532NT Natural and process piping systems, fuel, flexibility. 33NT Natural oil and refrigerant lines. 44NT Natural Flexible Tubing 55NT Natural Temperature Range: 66NT Natural 60 F to +212 F 88NT Natural 22NH 33NH 44NH 66NH 88NH Natural Natural Natural Natural Natural Thermoplastic Tubing PPLITIONS PERFORMNE DT Usual Service Part olors and No. vailable Temperature Range onstruction/onformances 22SN lack For instrumentation lines, lubrication Resists vermin attack. Moisture not required for 532SN lack and process piping systems, fuel, flexibility. 33SN lack oil and refrigerant lines. lack tubing offers 44SN lack Limited food service. outstanding resistance to 55SN lack sunlight. 66SN lack Temperature Range: 88SN lack 60 F to +225 F Flexible Tubing 22NSR 33NSR 44NSR 66NSR 88NSR lack lack lack lack lack 22NF lack, Natural For instrumentation lines, lubrication Resists vermin attack. Moisture not required for 532NF lack, Natural and process piping systems, fuel, flexibility. 33NF lack, Natural oil and refrigerant lines. lack tubing offers 44NF lack, Natural outstanding resistance to 55NF lack, Natural Temperature Range: sunlight. 66NF lack, Natural 60 F to +225 F 88NF lack, Natural Flexible Tubing 440NF lack, Natural 660NF lack, Natural 44PV lear For pneumatic lines and water Flexible Tubing 66PV lear piping. lear tubing is ideal where 88PV lear visual inspection of flow and cleanliness is desired. Temperature Range: 20 F to +165 F 602 lack For replacing metal air brake Material Specifications: onformances: 603 lack tubing on air brake systems, Tube: Nylon DOT FMVSS lack, lue, Red, except for the compressor Reinforcement: Polyester Fiber SE J844 Yellow, Green, discharge lines and other over: Nylon. Totally onded rown, Orange temperature limiting locations. 605 lack 606 lack, rown, lue, Green, Temperature Range: Orange, Red, -40 F to +200 F Yellow 608 lack, lue, Red, Green, rown, Yellow 610 lack, lue, Red, Green, 612 lack 103

106 Reference Data How to Install Metal Tubing PREUTIONS void straight line connections wherever possible, especially in short runs. Design piping systems symmetrically. They are easier to install and present a neat appearance. are should be taken to eliminate stress from tubing lines. Long tubing runs should be supported by brackets or clips. ll parts installed on tubing lines such as heavy fittings, valves, etc., should be bolted down to eliminate tubing fatigue. efore installing tubing, inspect the tube to see that it conforms to the required specifications, is of the correct diameter and wall thickness and is not out of round. ut tube ends reasonably square and light deburr inside and outside edge. hamfer on outside edge will destroy bearing of tube end on the fitting seat. To avoid difficulty in assembly and disconnecting, a sufficient straight length of tube must be allowed from the end of the tube to the start of the bend. llow twice the length of the nut as a minimum. Tubes should be formed to assemble with true alignment to the center line of the fittings, without distortion or tension. Recommended Metal Tubing Flare Dimensions SE 37 FLRE TUES Maximum Diameter Wall Thickness Tube (Inches) R (Inches) O.D. Radius Single Double Size Single Flare Double Flare (Inches) Flare Flare (Inches) Max. Min. Max. Min. ±020 D D 1 1/ / / / / / / / / SE 45 FLRE TUES Double Maximum Flare Wall Thickness Tube Diameter oined (Inches) O.D. (Inches) Seat Single Double Size Flare Flare (Inches) Single Flare Double Flare (Inches) D D 1 1/8.171/ / /16.239/ / /4.315/ / /16.388/ / /8.471/ / /16.545/ / /2.607/ / /16.660/ / /8.732/ / /4.900/ / / / /

107 General Information Thermoplastic hemical Resistance hart The information given below is based on reliable test results. are should be taken to use this data as a guide only, and to take into account such variables as temperature, concentration and fluid contamination. Each application should be tested prior to its use in commercial systems. ll ratings are given at 73 F. ontact Imperial Eastman for high temperature applications. Key to Ratings: = Excellent. Little or no swelling or softening. = Good. Swelling or softening is moderate. = Fair. onditional service may be expected. D = Unsatisfactory. Not recommended. NT = Not tested. Poly-Flo Impolene Nylo-Seal PV Poly-Flo Impolene Nylo-Seal PV cetaldehyde D D cetate solvents-crude D cetate solvents-pure D cetic cid 20% cetic cid 50% cetic cid-pure D D cetone D D cetophenone NT D cetylene D ir lcohols luminum hloride D luminum Sulfate lums mmonia (queous, liquid and cold gas) mmonium cetate mmonium arbonate mmonium hloride D mmonium Hydroxide mmonium Nitrate mmonium Phosphate mmonium Sulfate myl cetate D myl lcohol myl hloride D D D niline D sphalt D arium Salts eer eet Sugar Liquors NT enzaldehyde D D enzene or enzol D D enzoic cid orax oric cid randy NT romine Water, saturated D D D D utane D utter utyl cetate D alcium isulfite D alcium Hypochlorite D alcium Salts ane Sugar Liquors arbon Dioxide arbon Dioxide (dry) arbon Dioxide (wet) arbon Tetrachloride D D D arrot hlorine D D D D hloroform D D D hocolate Syrup hromic cid NT itric cid oke Oven Gas opper Salts opper Sulfate ore Oils NT ottonseed Oil reosote D D D yclohexanol D yclohexanone D D D Dibutyl Phthalate D Dichloroethylene NT NT Dioxane D D E Ethers D D D Ethyl cetate D Ethyl lcohol 40% D D Ethylene Glycol F Ferric hloride D Ferric Sulfate Ferrous hloride Ferrous Sulfate Formaldehyde Formic cid D Freon NT NT D Furfural D D D G Gasoline (sour) D D D Gasoline (refined) D D D Gelatin Glucose Glue Glycerin or Glycerol H Hydraulic Fluid D D Hydraulic Fluid (water/glycol) NT Hydrochloric cid 30% D Hydrochloric cid 50% D Hydrocyanic cid D Hydrofluoric cid (dil.) Hydrofluoric cid 38-40% D Hydrofluoric cid 50% D Hydrogen Fluoride D D Hydrogen Hydrogen Peroxide D Hydrogen Sulfide (dry) Hydrogen Sulfide (wet) 105

108 General Information Thermoplastic hemical Resistance hart Poly-Flo Impolene Nylo-Seal PV Poly-Flo Impolene Nylo-Seal PV I Iodine (in alcohol) D Isopropanol NT K Karo Syrup L Lacquer Solvents D Lactic cid Lead cetate Lime Sulfur NT Linseed Oil D NT M Machine Oil Magnesium hloride Magnesium Hydroxide Magnesium Sulfate Maleic cid NT NT Manganese Salts Mayonnaise Mercuric hloride D Mercury Methanol Methylene hloride D Milk Molasses N Natural Gas Nickel hloride Nickel Salts Nickel Sulfate D Nitric cid (dil.) D Nitric cid (med. conc.) D D Nitric cid (conc.) D D D Nitrobenzene D D Nitrogen Oxides D Nitrous cids NT D O Oils, Vegetable D Oleic cid D D Olive Oil D Oxalic cid Oxygen Gas P Palmitic cid D Perchloric cid D D Petroleum Oils (sour) Pertoleum Oils (refined) Phenol NT NT D D Phosphoric cid 25% Phosphoric cid 25-50% Phosphoric cid 50-85% Picric cid D D D Potassium arbonate Potassium hlorate Potassium hloride Potassium Hydroxide Potassium Iodide Potassium Sulfate Propane D Pyridine D 106 R Rosin (light) D S Sauerkraut Shellac D Silver Nitrate Soap Solutions Sodium icarbonate Sodium isulfate D Sodium isulfite Sodium orate Sodium arbonate Sodium hlorate Sodium hloride Sodium yanide Sodium Hydroxide Sodium Hypochlorite D Sodium Metaphosphate Sodium Nitrate Sodium Perborate Sodium Phosphate Sodium Silicate Sodium Sulfate Sodium Sulfide Sodium Sulfite Sodium Thiosulfate (hypo) Stearic cid Succinic cid Sulfate Liquors D Sulfur Sulfur hloride D Sulfur Dioxide D Sulfuric cid 10% D Sulfuric cid 10-75% D Sulfuric cid 75-98% D D D Sulfurous cid D T Tannic cid Tar D Tartaric cid Tetrahydrofurane D D Tetralin D D NT Thiopen D NT Toluene or Toluol D Tomato Trichlorethylene D D D Turpentine D U Urea V Varnish D Vinegar W Water (fresh) Water (salt) Whiskey Wines X Xylene or Xylol D D Z Zinc hloride Zinc Sulfate D NT

109 Index lpha-numeric by Part Number atalog No. Page No F OF P P P U U P PG U U UG OF P P PH PHS OF P OF OF P OF P LLP 28 atalog No. Page No. 269OF OFS P SP P OFS P OFS P P P OF P P PT P P P P PSS PD PM PMD PMSS PMSSD PSS PSSD P P P PD PSS PSSD PT PTSS 36 31PG 23 41F 60 41FS GS 61 60F 49 60FL 46 60FLV 46 61M 54 61F 49 61FL F 61 62M 54 62F 49 62FL 46 atalog No. Page No. 639F 61 63M 54 63F 50 63FL F F FS FSH F F F F F F F M 55 64F 50 64FL F F F F F F F 66 65M 55 65F F F F FS F F 68 66M 56 66F 50 66FL 47 66L FS FS F 68 68M 56 68F 51 68FL 47 68FLV 47 69M 57 69F 51 69FL 48 69FLV 48 atalog No. Page No. 708F FS FSS 75 70M 58 70F F FSS 75 71M 58 71F 52 71FL F FS FSS FSS 75 72M 58 72F 52 72FL 48 72L 40 73M 58 74M FS FSS F FS FSS F FSS F FPH FS FSS FSSZ FSZ FT F FS FSS FSSZ FSZ F FS FSS F F FS FSS F FS FSS 77 atalog No. Page No. 766F FS FSS F FS FSS F FS FSO FSS F FS FSO FSS 79 76M 59 76F F FS FSS F FS FSO FSS F FS FSO FSS F F FS FSS F FSS F FS FSS FSS FSS FS 73 80M 59 80F 53 81L 40 82M 59 82L 40 84L 41 85L 41 86L 41 87L 42 88L 42 atalog No. Page No. 89L 43 90L 43 91L 44 92L 44 94L 44 95L 45 99L

110 Technical Data Table of Decimal & Metric Equivalents 64ths 32nds 16ths 8ths Decimal MM 1/ / / / ths 32nds 16ths 8ths Decimal MM 33/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

111 TO ONVERT INTO MULTIPLY Y TO ONVERT INTO MULTIPLY Y tmospheres cms of mercury 76.0 ubic Feet cubic cms x 10 4 atmospheres ft. of water (at 4 ) cu ft cu inches 1728 atmospheres in of mercury cu ft cu meters (at 0 ) cu ft cu yds atmospheres kgs/sq cm cu ft gals atmospheres kgs/sq meter cu ft liters atmospheres pound/sq in cu ft pints (liq) cu ft quarts (liq) ar newtons/sq m 10 5 u Ft/min cu cms/sec bar atmospheres cu ft/min gals/sec bar at (tech.) cu ft/min liters/sec bar psi cu ft/min lbs water/min cu ft/sec gals/min arrels Oil gals/oil 42 T Units kg calories u Inches cc TUs ft lbs cu ins cu ft x 10-4 TUs hp hrs x 10-4 cu ins cu meters x 10-5 TUs kgs meters cu ins cu yds x 10-5 TUs kw hrs x 10-4 cu ins gals x 10-3 cu ins liters x 10-2 TU/Min ft lb/sec cu ins pints (liq) TU/min hp cu ins quarts (liq) TU/min kw TU/min watts u Meters cc 10 4 cu M cu ft entimeters inches cu M cu ins 61,023 cm meters 0.01 cu M cu yds cm mm 10 cu M gals cu M liters 10 3 ms mercury atm cu M pints (liq) 2113 cms mercury ft water cu M quarts (liq) 1057 cms mercury kgs/sq meter cms mercury lbs/sq ft u Yards cu cms x 10 5 cms mercury lbs/sq in cu yds cu ft 27 cu yds cu ins 46,656 ms/second ft/min cu yds cu meters cms/sec ft/sec cu yds gals cms/sec km/hr cms/sec meter/min 0.6 Decimeters meters 0.1 cms/sec miles/hr cms/sec miles/min x 10-4 Degrees (ngle) minutes 60 degs (angle) radians ms/sec/sec ft/sec/sec degs (angle) secs 3600 ubic ms cu ft x 10-5 cu cms cu in x 10-2 cu cms cu meters 10 6 cu cms cu yds x 10-6 cu cms gals x 10-4 cu cms liters 10-3 cu cms pints (liq) x 10-3 cu cms quarts (liq) x 10-3 Technical Data onversion Factors 109

112 Technical Data onversion Factors TO ONVERT INTO MULTIPLY Y TO ONVERT INTO MULTIPLY Y Degrees/Sec radians/sec Horse-Power TUs/min degs/sec revs/min hp ft lbs/min 33,000 degs/sec revs/sec hp ft lbs/sec 550 hp hp (metric) Feet cms hp kg calories/min ft ins 12 hp kws ft meters hp watts ft yds 1/3 Hp Hours TUs 2547 Ft of Water atms hp hrs ft lbs 1.98 x 10 6 ft of w ins mercury hp hrs kg calories ft of w kgs/sq cm hp hrs kg meters x 10 5 ft of w lbs/sq ft hp hrs kw hrs ft of w lbs/sq in Inches cms Feet/Min cm/sec ft/min ft/sec Ins Mercury atms ft/min kms/hr ins mercury ft water ft/min meters/min ins mercury kgs/sq cm ft/min miles/hr ins mercury lbs/sq ft ins mercury lbs/sq in Ft/Sec/Sec cms/sec/sec ft/sec/sec Meters/sec/sec Ins of Water atms ins of w ins mercury Ft Pounds TUs x 10-3 ins of w kgs/sq cm ft lbs hp hrs x 10-7 ins of w lbs/sq ft ft lbs kg calories x 10-4 ins of w lbs/sq in ft lbs kg meters ft lbs kw hrs x 10-7 Kilograms dynes 980,665 kgs lbs Ft lbs/min TUs/min x 10-2 kgs tons (short) x 10-3 ft-lbs/min ft-lbs/sec kgs grams 1000 ft lbs/min hp x 10-5 ft-lbs/min kg-calories/min x 10-3 Kgs/Sq m atms ft-lbs/min kws x 10-5 kgs/sq cm ft water kgs/sq cm ins mercury Ft lbs/sec TUs/min x 10-2 kgs/sq cm lbs/sq ft 2048 ft-lbs/sec hp x 10-3 kgs/sq cm lbs/sq in ft-lbs/sec kg-calories/min x 10-2 ft-lbs/sec kws x 10-3 Kilometers cms 10 5 kms ft 3281 Gallons ccs 3785 kms meters 10 3 gals cu ft kms miles gals cu ins 231 gals cu meters x 10-3 Kms/Hr cms/sec gals liters kms/hr ft/min gals pints (liq) 8 kms/hr ft/sec gals quarts (liq) 4 kms/hr meters/min kms/hr miles/hr Gallons, Imp US gals gallons, US imp gals Kms/Hr/Sec cms/sec/sec kms/hr/sec ft/sec/sec Gallons/Min cu ft/sec x 10-3 kms/hr/sec Meters/sec/sec gal/min liters/sec gal/min cu ft/hr

113 Technical Data onversion Factors TO ONVERT INTO MULTIPLY Y TO ONVERT INTO MULTIPLY Y Kilowatts TUs/min Newton kgs kws ft-lbs/min x 10 4 kws ft-lbs/sec Ounces lbs kws hp ozs gram kws kg-calories/min kws watts 10 3 Ounces (Fluid) cu in ozs (fluid) liters Kilowatt-Hrs TUs 3415 kw-hrs ft-lbs x 10 6 Pounds ozs 16 kw-hrs hp-hours lbs tons (short) kw-hrs kg-calories lbs newtons (N) 4.44 kw-hrs kg-meters x 10 5 lbs gram Liters ccs 103 Lbs of Water cu ft liters cu ft lbs of water cu in liters cu ins lbs of water gals liters liters cu meters gals Lbs of Water/Min cu ft/sec x 10-4 liters quarts (liq) Pounds/u Ft lbs/cu in x 10-4 Liters/Min gals/sec x 10-3 Pounds/u In lbs/cu ft 1728 Meters cms 100 meters ft Pounds/Sq In atms meters ins lbs/sq in ft water meters kms 10 3 lbs/sq in in mercury meters mms 10 3 lbs/sq in kgs/sq cm meters/min cms/sec meters/min ft/min Radians degrees meters/min ft/sec meters/min kms/hr 0.06 Tons (Long) kgs 1016 meters/min miles/hr tons (long) lbs 2240 tons (long) tons (short) Meters/Sec ft/min meters/sec ft/sec Tons (Short) kgs 2000 meters/sec kms/hr 3.6 tons (short) kps meters/sec kms/min 0.06 tons (short) tons (long) meters/sec miles/hr tons (short) tons (metric) meters/sec miles/min Watts TUs/min Micron meters 10-6 watts ft-lbs/min microns in 39 x 10-6 watts ft-lbs/sec watts hp x 10-3 Miles/Hr cms/sec watts kg-calories/min miles/hr ft/min 88 watts kws 10 miles/hr ft/sec miles/hr kms/hr Watts/Hours TUs miles/hr meters/min watts/hrs ft-lbs 2655 watts/hrs hp-hrs x 10-3 Millimeters cms 0.1 watts/hrs kg-calories mms ins watts/hrs kg-meters watts/hrs kw-hrs 10-3 Minutes (ngle) radians x

114 Technical Data Temperature onversion Look up reading in middle column (shaded). If in degrees entigrade, read Farenheit equivalent in right-hand column; if in Farenheit degrees, read entigrade equivalent in left-hand column. F = ( X 1.8) +32 = ( F - 32) X.5556 F F F F F F

115 General Information Metal Tubing/Fitting Reference Guide Maximum Tube Operating Size Tube Pressure Tubing O.D. Wall (PSI) Fittings 1 / / / OPPER 5 / Hi-Duty DED SOFT 3 / Flare SEMLESS 1 / Hi-Seal rass STM 75 5 / NSI H / / / / ompresamatic OPPER 1 / ompression DED SOFT 5 / Omega Flo SEMLESS 3 / Poly-Flo with Universal Sleeve* STM 75 1 / Poly-Flo Kwik-onnect ouplings* NSI H / (1/4 & 3/8 O.D.) with 261U 3 / Universal Nut & Sleeve Tube Tubing Size Tube Not Tubing Tubing O.D. Wall elled elled Fittings 1 / / OPPER 1 / DED SOFT 5 / SEMLESS 3 / STM 75 1 / Flex NSI H / / / / OPPER PIPE 1 / RED RSS 3 / rass Pipe* STM 43 1 / / STEEL 3 / OPPER 1 / RZED 5 / Flare (UNDY) 3 / STM / DOULE LP FLRE 5 / / / / / STEEL 3 / SEMLESS 1 / SE J524 5 / Hi-Seal Steel* WELDED 3 / SE J525 7 / / / Tube Type Type Size Tube PH Tubing O.D. Wall Sleeves Sleeves Fitting 1 / STINLESS 3 / STEEL 1 / NNELED 3 / SEMLESS 1 / TYPE / Hi-Seal Stainless Steel* STM / / / * onsult factory for further information.

116