NORSOK Coating system no. 1 (Shall be pre-qualified)

Size: px
Start display at page:

Download "NORSOK Coating system no. 1 (Shall be pre-qualified)"

Transcription

1 NORSOK Coating system no. 1 Carbon steel with operating temperature < 120 C - Structural steel - Exteriors of equipment, vessels, piping and valves (not insulated) Typical systems for newbuildings Pre-qualifications tested according to Edition 5 of NORSOK M-1 are still valid as the coating systems also fulfil all requirements in Edition 6. Other options are available contact TSS System no. Surface preparation Coating system DFT µm Test report number 1-85 Sa 2½ Barrier 1-84 Sa 2½ Barrier Sa 2½ Barrier 1-62 Sa 2½ Barrier 1-94 Sa 2½ Barrier Jotamastic, alum Sa 2½ Barrier Jotamastic, alum Sa 2½ Barrier Jotamastic, alum Sa 2½ Barrier Penguard Express 1-82 Sa 2½ Barrier LAB REP, Rev. 1 LAB REP, Rev Mt Mt01, Rev. A LAB REP LAB REP LAB REP LAB REP Mt01 May 2018 Page 1 of 5

2 1-74 Sa 2½ Barrier Jotamastic 87 Aluminium WG Sa 2½ Barrier Jotamastic WG Sa 2½ Barrier Jotamastic WG Muki Z 2001 Barrier Sweep blast Jotamastic WG Muki Z 2001 Barrier Sweep blast Jotamastic WG 1-87 Sa 2½ Barrier 1-86 Sa 2½ Barrier Sa 2½ Barrier Sa 2½ Barrier, alu 1-98 Sa 2½ Barrier Plus Sa 2½ Barrier Plus Jotamastic WG, alum Sa 2½ Barrier Plus Jotamastic WG, alum LAB REP SL Mt Mt Mt08 LAB REP LAB REP Mt09, Rev Mt Mt Mt Mt01 NORSOK M1 Edition 6 May 2018 Page 2 of 5

3 1-106 Sa 2½ Barrier Plus Jotamastic WG, alum Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus Sa 2½ Barrier Plus 1-76 Sa 2½ Resist Sa 2½ Resist 78 Jotamastic 87 Aluminium 1-97 Sa 2½ Resist 78 Jotamastic, alum Mt02 NORSOK M1 Edition 6 SL SL Mt Mt01 SL Mt Mt Mt Mt Mt02 LAB REP May 2018 Page 3 of 5

4 1-78 Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist Sa 2½ Resist 86 Jotamastic WG 1- Sa 2½ Sa 2½ Muki EPS Sa 2½ FC 1-91 Sa 2½ Mt05 LAB REP LAB REP Mt Mt M03, NORSOK M-1 Edition Mt Mt Mt03 SL Mt Mt04 May 2018 Page 4 of 5

5 1-111 Sa 2½ Sa 2½ Muki EPS Sa 2½ Marathon 0 GF Marathon 0 GF SL SL Mt 10 Typical systems for maintenance Pre-qualifications tested according to Edition 5 of NORSOK M-1 are still valid as the coating systems also fulfil all requirements in Edition 6. System no. Surface preparation Coating system DFT µm Test report number 1-58 UHPWJ Barrier / Hardtop PS5* Sa2½ Barrier Plus Jotamastic Smart Pack Sa2½ Jotamastic Smart Pack Jotamastic Smart Pack St 3 Jotamastic, alum. Jotamasdtic, alum. 1 2 SFTMK F047 SL LAB REP Rev.1 ISO ISO * and switching of topcoats: If agreed by the purchaser, the approved topcoat in a pre-qualified coating system, may substitute another pre-qualified topcoat, provided the intermediate coating is the same and the film-thickness of the topcoats are equal Please contact Technical Sales Support department ( or tss@jotun.com) for further information. May 2018 Page 5 of 5

Property Test/Standard Description

Property Test/Standard Description Approved 18400;18360 1,2 18400 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a surface tolerant, high solids, high build product. Specially designed

More information

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI)

aluminium, aluminium red toned, black, white and according to Multicolor Industry tinting system (MCI) 16560;16561;16840 1,2 16560 epoxy mastic VValidationDate). 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids,

More information

Date of issue: 20 April 2018 Page: 1/6

Date of issue: 20 April 2018 Page: 1/6 Approved 16560;16561;16840 1,2 16560 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 55 C VOC-US/Hong Kong. US EPA method 24 (tested) Approved 577;576 1,2 577 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It is highly scratch resistant. Suitable

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical) Approved 528;529 1,2 528 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially

More information

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.

Can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required. Other 462;463;9880;464;1500;7021 1,2 462 epoxy VValidationDate). 1 Product description This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an anti-skid coating.

More information

Property Test/Standard Description

Property Test/Standard Description Approved 2080;2081 1 2080 epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured epoxy coating. It is a high solids, high build product. Designed as a mid coat in systems

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 36 C calculated VOC-US/Hong Kong US EPA method 24 (tested) Approved 34802;34803;36922;37662 1,2 34802 epoxy mastic ^(ValidationDate) 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build

More information

Property Test/Standard Description

Property Test/Standard Description Approved 35042;33404 2 35042 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a high build, solvent free product. It provides superior resistance

More information

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas.

Approved. Marine: Exterior areas, specially designed for outside hull, may be used on superstructure, decks and other external areas. Approved 1055;1063 1,2 1055 vinyl epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured vinyl epoxy based coating. Specially designed as a tie coat between epoxy primers

More information

Specially designed for maintenance and repair of dedicated water ballast tanks on vessels and offshore structures. Other

Specially designed for maintenance and repair of dedicated water ballast tanks on vessels and offshore structures. Other Approved 385;386;799 1,2 385 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product.

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 25 C Approved 1531;3560;1533 1,2 1531 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

HD-21 MKI - Free Fall Lifeboat Davit

HD-21 MKI - Free Fall Lifeboat Davit HD-21 MKI - Free Fall Lifeboat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0170 Rev. Date: 10.10.2016 Rev. No: 1 Tel: +47 37 05 85 00 Fax: +47 37

More information

Property Test/Standard Description

Property Test/Standard Description Approved 9211;9212 6 9211 epoxy based ^(ValidationDate) 1 Product description This is a two component epoxy primer. Pigmented with a high content of aluminium flakes giving very good waterproof protection.

More information

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong Approved 8380;8500 2 8380 phenolic/novolac epoxy ^(ValidationDate). 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. Specially designed tank coating with excellent

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 31462;9441 1,2 31462 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 33 C calculated VOC-USA / VOC Hong Kong EPA Method 24 15720;15760 1 15720 novolac epoxy VValidationDate). 1 Product description This is a two component amine cured novolac epoxy coating. It is a light coloured conductive coating with very good chemical resistance.

More information

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other

To be used as a coating for potable water tanks and pipes. Independently tested and certified for potable water storage. Other Approved 9440;9441 1,2 9440 epoxy ^(ValidationDate) 1 Product description This is a two component solvent free amine cured epoxy coating. It is specially designed for drinking water tanks. Can be used

More information

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C

Property Test/Standard Description. 63± 2 % Gloss level (GU 60 ) ISO gloss (70-85) Flash point ISO 3679 Method 1 30 C Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable.

General: Primarily designed for maintenance and repair. In immersed environments Jotamastic 80 Aluminium is suitable. Approved 5580;5660;6520 1,2 5580 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially

More information

Osnabrück, March 11, Veerle Thiré

Osnabrück, March 11, Veerle Thiré Osnabrück, March 11, 2011 Veerle Thiré Background Hydrex: underwater repair and maintenance Subsea Industries: cleaning equiment Ecospeed: hull coating Who are we? We are Hydrex, a leading international

More information

Technical Data Megacote

Technical Data Megacote Technical Data Megacote Product description Megacote is a fast-curing abrasion resistant high solids two-component epoxy anticorrosive coating that will bond to a wide variety of substrates. Recommended

More information

Aerodur 2111 Chrome Free Primer

Aerodur 2111 Chrome Free Primer Technical Data Sheet Product Group High Solid Epoxy Chromate Free Primer Characteristics - A VOC compliant, chrome free, corrosion inhibiting, urethane Product compatible, Skydrol resistant primer for

More information

Property Test/Standard Description

Property Test/Standard Description Approved 612;625;627 1,2 625 epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured epoxy coating. It has a glossy finish with fair gloss retention. To be used as topcoat

More information

Air Reservoirs. 1st edition. This publication is not subject to any update service. New versions are available in INFORM at

Air Reservoirs. 1st edition. This publication is not subject to any update service. New versions are available in INFORM at 1st edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com 815 000 490 3 8150004903 c Copyright WABCO 2005 Vehicle Control Systems An

More information

Advantages of ALEXIT BladeRep

Advantages of ALEXIT BladeRep Advantages of ALEXIT BladeRep Product can be used individually or as a complete system User-friendly packaging for repairs of any size Easy mixing and application Specifically designed for blade repair

More information

Property Test/Standard Description

Property Test/Standard Description Approved 10200;11420 1,2 10200 zinc ethyl silicate ^(ValidationDate) 1 Product description This is a two component moisture curing inorganic zinc ethyl silicate coating. It is a specially designed tank

More information

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product)

two component solvent free amine cured phenolic epoxy coating (1 g/cm³ = 8.25 lb/us gal; 1 m²/l = 40.7 ft²/us gal) (data for mixed product) 5 pages Revision of September 2005 DESCRIPTION two component solvent free amine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS one coat tank coating system clear version is the basis for the glassmat

More information

two component solvent free amine cured phenolic epoxy coating

two component solvent free amine cured phenolic epoxy coating 6 pages Revision of February 2006 DESCRIPTION two component solvent free amine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS one coat tank coating system clear version is the basis for the glassmat

More information

PAC33NV Polyurethane Primer. Mix Ratio (by volume) 4359/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0477/9000 (Thinner) 3 parts

PAC33NV Polyurethane Primer. Mix Ratio (by volume) 4359/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0477/9000 (Thinner) 3 parts Polyurethane Primer TECHNICAL DATA SHEET Product Description PU Primer is a two component, highly flexible, fast drying primer from the PU66 system, designed for use on internal fuel tank surfaces and

More information

SULLAIR SX Filtration Series ,000 scfm

SULLAIR SX Filtration Series ,000 scfm SULLAIR SX Filtration Series 25 21,000 scfm The Importance of Reliable Filtration Contaminants are introduced at various stages of the air compression cycle. Removing these contaminants is vital to help

More information

Slide and Turn System SF25

Slide and Turn System SF25 Profile system Frameless all-glass slide and turn system Option of flush or weathered bottom track Optionally with lateral aluminium panel profiles to close the ventilation gap The flush bottom track is

More information

10P20-13 High Solids Primer

10P20-13 High Solids Primer Technical Data Sheet Product Group Epoxy primer Characteristics Product Information This low VOC two-component epoxy primer exhibits excellent corrosion resistance with good flexibility and chemical resistance.

More information

Liquefied gas cargo tanks and process pressure vessels

Liquefied gas cargo tanks and process pressure vessels .1 -.3 Liquefied gas cargo tanks and process pressure vessels.1 General.1.1 The present texts give the general principles which are applied by Classification Societies for approval and survey of the relevant

More information

Pressure Regulating Valves. Models 44, 77 & 68 PS\ UL. Pressure Relief Valve. Dorot Fire Protection Division. Certification & compliance by design

Pressure Regulating Valves. Models 44, 77 & 68 PS\ UL. Pressure Relief Valve. Dorot Fire Protection Division. Certification & compliance by design Fire Protection Div. Dorot Fire Protection Division Models, & 6 PS\ UL Pressure Relief Valve Certification & compliance by design -PS\UL ANSI FCI - Class VI seat leakage class Fire tested to EN ISO 6-:6

More information

EnerVal. Technical data litre storage capacity. Buffer storage vessels

EnerVal. Technical data litre storage capacity. Buffer storage vessels EnerVal Buffer storage vessels Technical data 200-10000 litre storage capacity Contents Title Page number EnerVal (200-2000) Description 3 Part No. 4 Technical data 6 Dimensions 7 EnerVal G (1000-10000)

More information

B74G - EXCELON Modular System General purpose filter/regulator

B74G - EXCELON Modular System General purpose filter/regulator > Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory

More information

TECHNICAL DATA OBSOLETE

TECHNICAL DATA OBSOLETE June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure

More information

A new concept in the storage of liquefied chemical and petrochemical gases Zero leakage Zero fugitive emissions

A new concept in the storage of liquefied chemical and petrochemical gases Zero leakage Zero fugitive emissions A new concept in the storage of liquefied chemical and petrochemical gases Zero leakage Zero fugitive emissions Introduction Industries involved in the handling of dangerous fluids have to answer increasing

More information

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience

DTM Coatings for Rail. Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience DTM Coatings for Rail Polyaspartic Ester Technology By Kurt Best Bayer MaterialScience Polyaspartic Topics Resin Technology Use in Rail Market New Developments in Technology Polyaspartic Coatings What

More information

SIGMAGUARD CSF 575. PRODUCT DATA SHEET September 14, 2015 (Revision of September 14, 2015) DESCRIPTION

SIGMAGUARD CSF 575. PRODUCT DATA SHEET September 14, 2015 (Revision of September 14, 2015) DESCRIPTION DESCRIPTION Two-component, solvent-free, amine-cured modified epoxy coating PRINCIPAL CHARACTERISTICS Tank coating for drinking water Can be applied by single-feed, airless spray equipment Reduced explosion

More information

En-Tegrity. A step change in subsea well control safety

En-Tegrity. A step change in subsea well control safety En-Tegrity A step change in subsea well control safety Product Overview 7-3/8, 10,000psi, Shear & Seal Gate Valve Main Well Barrier in Intervention Well Control Package (WCP) Features Bi-Directional Sealing

More information

DuPont Kalrez. Oil and Gas Product Selector Guide. Technical Information April 2017

DuPont Kalrez. Oil and Gas Product Selector Guide. Technical Information April 2017 DuPont Kalrez Oil and Gas Product Selector Guide Technical Information April 2017 DuPont has more than 30 years of experience providing perfluoroelastomer seals to the oil and gas industry. Over this time,

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical)

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C calculated IED (2010/75/EU) (theoretical) Approved 462;463;9880;464;1500;7021 1,2 462 epoxy ^(ValidationDate) 1 Product description This is a three component abrasion resistant polyamine cured epoxy coating. Specially designed as an antiskid coating.

More information

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4 V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper

More information

31 st Gas-Lift Workshop

31 st Gas-Lift Workshop 31 st Gas-Lift Workshop Houston, Texas February 4-8, 2008 NEW REQUIREMENTS TO GAS LIFT VALVES Øyvind Stokka & Erling Kleppa Petroleum Technology Company This presentation is the property of the author(s)

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

Standox VOC Pro Filler U7530

Standox VOC Pro Filler U7530 Standox VOC Pro Filler U7530 is a highly effective 2K filler for fast and economical refinish work It is available in black, mid-grey and white Efficient sanding filler that can be mixed with all Standox

More information

Materials : Carbon steel ASTM A216 WCB

Materials : Carbon steel ASTM A216 WCB Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless

More information

Ducted Reverse Cycle Air Conditioning of Distinction

Ducted Reverse Cycle Air Conditioning of Distinction Ducted Reverse Cycle Air Conditioning of Distinction Transforming global energy-efficiency into an art form! The Braemar advantage Braemar ducted reverse cycle air conditioners are brought to you by Seeley

More information

Vacuum Insulated vertical cryogenic CO 2 & N 2 O Tanks

Vacuum Insulated vertical cryogenic CO 2 & N 2 O Tanks Vacuum Insulated vertical cryogenic CO 2 & N 2 O Tanks CRYOLOR introduces the latest generation vacuum isolated cryogenic tank, the RCIA Céline 3, for liquid CO 2 and N 2O service, with inner vessel in

More information

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits.

AkzoNobel Aerospace Coatings. Primerr. Product Group. Epoxy primer. Characteristics Product Information. resistance. Components * TR-114. permits. Product Group Epoxy primer Characteristics Product Information - This low VOC two-component epoxy primerr exhibits excellent corrosion resistance with good flexibility and chemical resistance. Components

More information

Interzinc 22 Application Guidelines

Interzinc 22 Application Guidelines Interzinc 22 Page 1 of 10 Interzinc 22 Application Guidelines Prepared by: M&PC Technical Operations International Paint Ltd. www.international-pc.com The information in this guideline is not intended

More information

STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)

STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply

More information

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description

S0200V. Product Data Sheet August Primecoat P FOR PROFESSIONAL USE ONLY. Product Description Product Data Sheet August 2006 FOR PROFESSIONAL USE ONLY Product Primecoat P565-625 Description P565-625 Primecoat - Greyish green P275-124 Standard Activator P275-232 Slow Activator P275-292 Extra Slow

More information

Supplementary Installation and Operating Instructions. Variable Area Flow Meters SGK-1 Ex SGK-2 Ex SGK-3 Ex. Category: II 2G Ex IIC II 3G Ex IIC

Supplementary Installation and Operating Instructions. Variable Area Flow Meters SGK-1 Ex SGK-2 Ex SGK-3 Ex. Category: II 2G Ex IIC II 3G Ex IIC Supplementary Installation and Operating Instructions Variable Area Flow Meters SGK-1 Ex SGK-2 Ex SGK-3 Ex Category: II 2G Ex IIC II 3G Ex IIC Contents 1 General safety directions...3 2 Main safety features...4

More information

Calibration Procedure. PosiTest DFT Combo

Calibration Procedure. PosiTest DFT Combo Management Procedure 2576 Revision: A Date Issued: July 21, 2004 Date Revised: Calibration Procedure DeFelsko Corporation PosiTest DFT Combo Coating Thickness Gages Table of Contents 1 Introduction and

More information

FIREFIGHTING EQUIPMENT

FIREFIGHTING EQUIPMENT FIREFIGHTING EQUIPMENT User Manual "BIPOK" 2way gated wyes DOC 2052 EN Rev.A 20/0/204 Identification Type of Product Product Product Referenced FIELD Documentation Number 2052 Language 2way gated wyes

More information

MEDICAL EQUIPMENT CATALOG

MEDICAL EQUIPMENT CATALOG THE MOST TRUSTED MEDICAL EQUIPMENT IN NORTH AMERICA MEDICAL EQUIPMENT CATALOG Total Components Including Bulk Oxygen Supply, Back up and Delivery Equipment Designs for High Pressure, Liquid or Bulk Applications

More information

Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing

Flange Bolt Torquing. for Resistoflex Plastic-Lined Piping Products. Torquing. Retorquing. Hydrotesting. Annual retorquing Flange Bolt Torquing for Resistoflex Plastic-Lined Piping Products Torquing When assembling flange connections, always use a full complement of clean, new high strength A193-B7 bolting. If using stainless

More information

Centrifugal Gas Separator ZGA. Operating Manual. Dimensions, weights and other technical data are subject to changes.

Centrifugal Gas Separator ZGA. Operating Manual. Dimensions, weights and other technical data are subject to changes. Centrifugal Gas Separator ZGA Operating Manual Am Neuen Rheinhafen 4 - D-67346 Speyer Postfach 1709 - D-67327 Speyer Phone: +49 (6232) 657-0 Fax: +49 (6232) 657-505 Internet: http://www.burmt.de Email:

More information

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating

AMERCOAT 370. PRODUCT DATA SHEET June 16, 2016 (Revision of October 9, 2015) DESCRIPTION. Two-component, fast dry multi-purpose epoxy coating DESCRIPTION Two-component, fast dry multi-purpose epoxy coating PRINCIPAL CHARACTERISTICS Multi-purpose high build epoxy Application over a wide range of surface temperatures Suitable for immersion in

More information

Specification. M/V Viggen Viggen Drydocking of 16. Oy Hempel (Finland) Ab Bertel Jungin aukio 5 FI Espoo Finland hempel.

Specification. M/V Viggen Viggen Drydocking of 16. Oy Hempel (Finland) Ab Bertel Jungin aukio 5 FI Espoo Finland hempel. Oy Hempel () Ab 1 of 16 M/V Viggen Viggen Drydocking 2018 Oy Hempel () Ab 2 of 16 Customer M/V Viggen PB 1060 Ålands Mariehamn IQS ref.no.: QU0000005817 Date: 11 Dec 2017 Prepared by: Kim Flytstrom Application

More information

Property Test/Standard Description

Property Test/Standard Description Approved 36902;36903 2 36902 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with good gloss

More information

BXUV.X661 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263

BXUV.X661 - Fire Resistance Ratings - ANSI/UL 263. Design/System/Construction/Assembly Usage Disclaimer. Fire Resistance Ratings - ANSI/UL 263 BXUV.X661 Fire Resistance Ratings - ANSI/UL 263 Page Bottom Design/System/Construction/Assembly Usage Disclaimer Authorities Having Jurisdiction should be consulted in all cases as to the particular requirements

More information

Standard Flexel 3D bioprocessing bags for Palletank

Standard Flexel 3D bioprocessing bags for Palletank Standard Flexel 3D bioprocessing bags for Palletank Fluid Management Systems Features Multiple manufacturing sites All connections extensively qualified Full compliance with ISO11137 Standard design Designed

More information

RULES PUBLICATION NO. 119/P

RULES PUBLICATION NO. 119/P RULES PUBLICATION NO. 119/P PERIODIC SURVEYS OF FUEL INSTALLATIONS ON SHIPS OTHER THAN LIQUEFIED GAS CARRIERS UTILIZING GAS OR OTHER LOW FLASH POINT FUELS 2019 January Publications P (Additional Rule Requirements)

More information

Diving Standards. Health & Safety Authority March 2017

Diving Standards. Health & Safety Authority March 2017 2017 Diving Standards Health & Safety Authority March 2017 This information is provided for reference only. As standards are under regular review, readers can validate the status of Irish standards on

More information

ISO INTERNATIONAL STANDARD. Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves

ISO INTERNATIONAL STANDARD. Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves INTERNATIONAL STANDARD ISO 21013-1 First edition 2008-06-15 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves Récipients cryogéniques Dispositifs

More information

MSC Guidelines for Pressure Vessels

MSC Guidelines for Pressure Vessels References: a. 46 CFR Part 54 Pressure Vessels S. T. Brady, CDR, Chief, Engineering Division b. ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 1, (1998 Edition) c. Navigation and Inspection

More information

Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs)

Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 Edition 4 December 2018 Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 / Edition: 4 Page 1 of 8 Contents 1. Introduction 2 2. Scope - Inspection Services

More information

CNG FILLING STATIONS

CNG FILLING STATIONS CNG FILLING STATIONS GAS INLET 3/4 F EXIT CNG TO CAR TANK 5 mt / 16 feet HOSE AND FILLING NOZZLE REMOTE ELECTRIC PANEL THREE-PHASE height 40 cm / 15.7 width 30 cm / 11.8 depth 20 cm / 7.8 EQUIPPED WITH

More information

Mobile High Pressure Compressor Unit for Compressing Air and Breathing Air. PE 250-TE with compressor control (optional equipment)

Mobile High Pressure Compressor Unit for Compressing Air and Breathing Air. PE 250-TE with compressor control (optional equipment) Mobile High Pressure Compressor Unit for Compressing Air and Breathing Air Types: PE 200-TE PE 250-TE PE 300-TE Production status: F02 PE 250-TE with compressor control (optional equipment) General Medium

More information

CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION

CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION CERTIFICATION OF COMPLIANCE OF THE USER S DESIGN SPECIFICATION I, the undersigned, being experienced and competent in the applicable field of design related to pressure vessel requirements relative to

More information

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal.

DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare metal. PRODUCT DESCRIPTION DP 40 CHROMATE-FREE 2K EPOXY DP40 D834 DP402 HARDENER D835 DP40 is a versatile 2K Epoxy Surfacer. It is light grey in colour, chromate-free and has good corrosion resistance over bare

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 23936-2 First edition 2011-12-15 Petroleum, petrochemical and natural gas industries Non-metallic materials in contact with media related to oil and gas production Part 2: Elastomers

More information

2.1 Introduction to pressure vessels

2.1 Introduction to pressure vessels 2.1 Introduction to pressure vessels Pressure vessels in the form of cylinders and tanks are used for storing variety of liquids and gasses at different temperatures and pressures. Some of the substances

More information

Slam Shut Valves SCN

Slam Shut Valves SCN Slam Shut Valves SCN SCN > Slam shut valves Introduction SCN is a compact safety device (SAV) which quickly intercept gas flow whenever the pressure under monitoring reaches a pre-set limits, or whenever

More information

Property Test/Standard Description

Property Test/Standard Description Approved 14902;14903 2 14902 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured pure epoxy coating. It is a fast drying, high solids, high build product. It has excellent

More information

Telescopic winch handle Speedfriend"

Telescopic winch handle Speedfriend Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;

More information

Valves. Diaphragm shut-off valves, kidney-type

Valves. Diaphragm shut-off valves, kidney-type Valves Diaphragm shut-off valves, kidney-type Application When leakage of even the smallest quantities must be avoided with certainty For maximum requirements to operating safety For maximum requirements

More information

ADCI Consensus Standards - GAP Analysis Rev. 6 and 6.1 April 2, 2014

ADCI Consensus Standards - GAP Analysis Rev. 6 and 6.1 April 2, 2014 ADCI CS Rev. 6 (2011) ADCI CS Rev. 6.1 (2014) Section 1.0 General Provisions IMPLEMENTATION OF CERTIFICATION AND EQUIPMENT REQUIREMENTS Superscripts 1- Compliance within 6 mos. 2- Compliance within 12

More information

Pulsed Eddy Current (PEC) Inspection through Insulation

Pulsed Eddy Current (PEC) Inspection through Insulation Pulsed Eddy Current (PEC) Inspection through Insulation Inspection through insulation opens unexpected opportunities Shell Global Solutions in Amsterdam has developed over the past few years an inspection

More information

Hempadur Multi-Strength GF Unsurpassed low friction, abrasion and ice resistant coating

Hempadur Multi-Strength GF Unsurpassed low friction, abrasion and ice resistant coating Hempadur Multi-Strength GF 35870 Unsurpassed low friction, abrasion and ice resistant coating Proven protection for ice trading vessels If your vessel operates in icy waters, you need a coating that will

More information

APPLICATION GUIDELINES BALLAST TANKS

APPLICATION GUIDELINES BALLAST TANKS APPLICATION GUIDELINES BALLAST TANKS Revision 10 Issue Date: 21 st November 2017 All products supplied and technical advice or recommendations given are subject to our standard Conditions of Sale. Page

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATASHEET N 2400 N 2400.15 ST.9 E Concept The diaphragm pumps from KNF arebased on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its

More information

50Hz. water solutions. O SerieS DGO DRO

50Hz. water solutions. O SerieS DGO DRO Hz water solutions O SerieS DGO DRO D a t a b o o k l e t EN water solutions O SerieS DGO DRO Hz D a t a b o o k l e t O SERIES O Series General characteristics AISI stainless steel lifting and carrying

More information

Technical Information Ball valves for high pressure applications

Technical Information Ball valves for high pressure applications Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be

More information

RR 16 Commercial & Industrial Regulator

RR 16 Commercial & Industrial Regulator Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations

More information

Flex-Kleen CT Series Pulse-Jet Dust Collectors For high pressure/high vacuum applications

Flex-Kleen CT Series Pulse-Jet Dust Collectors For high pressure/high vacuum applications Bulletin CT Flex-Kleen CT Series Pulse-Jet Dust Collectors For high pressure/high vacuum applications CT (Circular Tank) COLLECTORS... especially effective for dusting problems in drying, grinding and

More information

List of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6

List of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6 Úprava stlačeného vzduchu EWO VMA List of Contents System description Individual Units Pre-Filters 3 Micro-Filters 4 Activated-Charcoal-Filters 5 Combinations 6 Accessories and Main spare parts 6 Service

More information

A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications

A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications SAPAG A soft sealed atmospheric safety valve with large flow capacity and soft seat tightness for steam condenser and turbine applications Features The Sapag Series 1100 steam safety valve is used for

More information

PAC33 Polyurethane Primer. Mix Ratio (by volume) 4355/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0433/9000 (Thinner) 4-5 parts

PAC33 Polyurethane Primer. Mix Ratio (by volume) 4355/3600 (Base) 5 parts 0701/9000 (Activator) 1 part 0433/9000 (Thinner) 4-5 parts TECHNICAL DATA SHEET Product Description is a two component, corrosion inhibitive, polyurethane primer modified with epoxy resin. is designed for use with aerospace paint systems. Excellent corrosion resistance

More information

SIGRAFLEX MF Approvals/Test reports

SIGRAFLEX MF Approvals/Test reports SIGRAFLEX MF Approvals/Test reports Table of contents TA Luft (VDI 2440/VDI 2200) (MPA Stuttgart) (German)... 2 Blow-out resistance (at 2.5 times the nominal pressure) (TÜV SÜD) (German)... 3 Fire Safety

More information

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications

Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications Imron Industrial Strength Ultra Low VOC Polyurethane Clear Reduced Gloss Modifications GENERAL DESCRIPTION Imron Industrial Strength Clear, 9C01, is a high gloss, high performance clear coat designed to

More information

QUORUM TECH 150RES THE FIRST AND THIRD WEEK WILL BE SET UP FOR CARBON COATING THE SECOND AND LAST WEEK WILL BE SET UP FOR GOLD COATING

QUORUM TECH 150RES THE FIRST AND THIRD WEEK WILL BE SET UP FOR CARBON COATING THE SECOND AND LAST WEEK WILL BE SET UP FOR GOLD COATING QUORUM TECH 150RES This document is intended to describe the function and use of the QuorumTech Q150RES system. Formal training and qualification by staff is required before gaining access to the tool.

More information

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group Pressure F. INTERPRETATION OF THE ESSENTIAL SAFETY REQUIREMENTS ON MANUFACTURING Guideline F-01 Guideline related to: Annex 1 Section 3.1.2 According to section 3.1.2 (permanent joining) of Annex I, the third party

More information

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy

Carboguard 893 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy SELECTION & SPECIFICATION DATA Generic Type Description Features Cycloaliphatic Amine Epoxy High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 36 C

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 36 C Approved 635 1,2 635 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. It has a glossy finish with good gloss retention. To be used as topcoat in atmospheric

More information

APPLICATION GUIDELINES BALLAST TANKS

APPLICATION GUIDELINES BALLAST TANKS APPLICATION GUIDELINES BALLAST TANKS Revision 12 Issue Date: 21 st November 2017 All products supplied and technical advice or recommendations given are subject to our standard Conditions of Sale. Page

More information