Julia Nightstand [1] Julia Nightstand Published on Ana White ( Submitted by Ana White [2] on Tue, :08
|
|
- Arline Reed
- 5 years ago
- Views:
Transcription
1 [1] Submitted by Ana White [2] on Tue, :08 Page 1 of 26
2 Page 2 of 26
3 [1] Additional Photos [3] [4] [5] [6] [7] We have a really amazing plan today for you! You are going to love it! Especially if you have a little girl that likes pretty things! Page 3 of 26
4 But before we get to this amazing plan, something else super amazing is happening today. Tonight, I am talking to Darren Rowse of Problogger! [8] And I wanted to invite you personally to be part of the conversation. You can submit questions to ask to! I'd love to have questions from you. [8] Page 4 of 26
5 The webinar is by reservation only, so please sign up right now [9] seats are limited and filling up fast. It would mean tons to me if you joined us! Hope to see you then! And I did promise you a super amazing plan today - didn't I? Page 5 of 26
6 Page 6 of 26
7 I worked with my friend Whitney [10] who also made the beautiful platform beds [11] and so cute headboards [12] to make this nightstand. It's all in the details and pretty pink paint for this one! From Whitney: These were so fun to make! I had both done in just a couple hours. I love how much character they add to the room and the price tag is the best part! My girls love them too... Especially the pink! ;-) Make sure you stop over and visit Whitney at Shanty2Chic [10] for lots more photos and details! Summary: Build a pretty nightstand! Free plans! CategoriesProject Type: Nightstands [13] Room: Bedroom [14] Skill Level: Advanced [15] Style: Children's and Kid's Room Furniture and Toy Plans [16] Estimated Cost: $20 - $50 [17] Dimensions: Dimensions are shown above. Dimensions: Page 7 of 26
8 feet long 8 feet long 8 feet long 8 feet long 2 feet long ¼ sheet ¼ plywood Common Materials: 1 1/4 inch finish nails 1-1/4" Pocket Hole Screws [18] Elmer's Wood Glue [19] Elmer's Wood Filler [20] primer paint paint brush Tools: Tape Measure [21] Speed Square [22] Carpenter's Pencil [23] Page 8 of 26
9 Safety Glasses [24] Hearing Protection [25] Kreg Jig [26] Drill [27] Jigsaw [28] Brad Nailer [29] Power Sander [30] Cut List: 2 11 ¼ 2 11 ¼ 2 22 ½ 4 23 ¼ ½ (decorative moulding) Edge Moulding is cut to fit 1 ¼ plywood@ 16 x 23 ¼ DRAWER 2 11 ¼ 2 13 ½ 1 ¼ 12 ¾ x 13 ½ 1 12 ¾ (false face) 2 13 ½ (drawer slides) General Instructions: Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Step 1 Page 9 of 26
10 [31] Start by just building the two sides. I recommend PHs for this plan, so drill those first as shown in the diagram above for attaching legs. Use 3/4" PH settings. Step 2 Page 10 of 26
11 [32] Then attach legs with 1 1/4" PH screws and glue, flush to top. If you are NOT using the decorative legs, then cut your legs another couple of inches longer instead. Step 3 Page 11 of 26
12 [33] Build your bottom shelf first and then attach to base. Step 4 Page 12 of 26
13 [34] And then add top supports. Step 5 Page 13 of 26
14 [35] Build top first and then attach to top through top supports. Step 6 Page 14 of 26
15 [36] Now your drawer. This drawer just slides on wooden guides, so make 1/8" to 1/4" less in overall width than opening. Step 7 Page 15 of 26
16 [37] These are those drawer guides I was talking about. Make sure you nail them in level. TIP - Rub candle wax over the tops so the drawer slides smoothly. Remember to inset drawer guides 3/4". Step 8 Page 16 of 26
17 [38] Place drawer in cabinet and check to make sure it slides easily. Step 9 Page 17 of 26
18 [39] Step 9 Instructions: Now add your drawer face. It will cover up any problems in the drawer :) Step 10 Page 18 of 26
19 [40] And then the bottom trim... Step 11 And finally the cute little cutouts that really make this nightstand charming. Page 19 of 26
20 [41] Step 12 Page 20 of 26
21 [42] I love adding moulding around the top edges. Really give a finishing touch! Step 13 Page 21 of 26
22 [43] And then add the legs! Step 14 Page 22 of 26
23 [44] And finally the back! Finishing InstructionsPreparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Source URL: Page 23 of 26
24 Links [1] [2] [3] jpg [4] jpg [5] jpg [6] jpg [7] jpg [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] TF8&camp=1789&creative=390957&creativeASIN=B U2&linkCode=as2&tag=knooffwoo-20&linkId=5AJJ GUAWGYX2TT7E [19] [20] struction# [21] dp/b00002x2ge/ref=as_li_ss_tl?s=hi&ie=utf8&qid= &sr=1-1&keywords=stanley+16+foot+tape+measure&a mp;linkcode=ll1&tag=knooffwoo20-20&linkid=eec222f82fbe 44887db4f333deeb210e&language=en_US [22] O/ref=as_li_ss_tl?s=hi&ie=UTF8&qid= Page 24 of 26
25 &sr=1-3&keywords=speed+square&linkcode=ll1&t ag=knooffwoo20-20&linkid=320c4213eaaa27a0cf8de126c77f71ce &language=en_us [23] ece/dp/b0002ukq1g/ref=as_li_ss_tl?s=hi&ie=utf8&qid= &sr=1-5&keywords=carpenter+pencil&linkCod e=ll1&tag=knooffwoo20-20&linkid=7fac284ef4f952dfee44f0 673bcc5c3d&language=en_US [24] ef=as_li_ss_tl?ie=utf8&asins=b07253g22t&isrefresh=1&a mp;orderid= &purchaseid= &ref_=chk_typ_browserRefresh&viewId=ThankYouCart &linkcode=ll2&tag=knooffwoo20-20&linkid=874cc3bb cf86bcf48a5e97&language=en_US [25] pf_rd_m=atvpdkikx0der&pf_rd_s=hero-quick-promo&pf_rd_ r=7hrp6vn8hc2n89zkwezg&pf_rd_r=7hrp6vn8hc2n89zkwez G&pf_rd_t=201&pf_rd_p=d59dbb70-7ae6-48fe-a913-94e8957 9aec2&pf_rd_p=d59dbb70-7ae6-48fe-a913-94e89579aec2&p f_rd_i=b01fl5bqga&linkcode=ll1&tag=knooffwoo20-20&am p;linkid=fd59f542e0ed507f2b4af b52&language=en_us [26] L9BM/ref=as_li_ss_tl?s=power-hand-tools&ie=UTF8&qid= &sr=1-7&keywords=Kreg+Jig&linkCode=ll1&a mp;tag=knooffwoo20-20&linkid=a4db216a16a e090da2e0 ddeb7&language=en_us [27] dp/b005nnf0yu/ref=as_li_ss_tl?s=power-hand-tools&ie=utf8&am p;qid= &sr=1-3&keywords=drill&linkcode=ll 1&tag=knooffwoo20-20&linkId=9cbe53e8470db181dbb81d3 28a0a6175&language=en_US [28] /dp/b00ozeul7y/ref=as_li_ss_tl?s=hi&ie=utf8&qid= &sr=1-7&keywords=jigsaw&linkCode=ll1&tag =knooffwoo20-20&linkid=ead0f74a a2762cee5042a75& amp;language=en_us [29] ss-battery/dp/b017nj6x7e/ref=as_li_ss_tl?s=hi&ie=utf8&qid = &sr=1-4&keywords=brad+nailer+cordless&am p;linkcode=ll1&tag=knooffwoo20-20&linkid=dcad8c839c75b c34e183d7&language=en_US [30] Page 25 of 26
26 der/dp/b00mlss1sw/ref=as_li_ss_tl?s=hi&ie=utf8&qid= &sr=1-4&keywords=sander&linkCode=ll1& ;tag=knooffwoo20-20&linkid=888457a0a1042c e15b9d3 b50&language=en_us [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] Page 26 of 26
Sand and Water Play Table [1]
[1] Submitted by Ana White [2] on Mon, 2016-03-28 11:21 Page 1 of 16 [1] Additional Photos Page 2 of 16 [3] [4] [5] [6] Hi everyone, hope you had an great weekend. Spring is coming early for us this year
More informationPitts Model 12 Wing Leading edge Installation
Pitts Model 12 Wing Leading edge Installation This procedure is used to install molded plywood leading edges included in the Pitts Model 12 kit. Nine (9) molded leading edge section are require per aircraft;
More informationINSTRUCTIONS FOR GLUING ON THE BUMPER FOR PORT TOWNSEND WATERCRAFT S NESTING DINGIES. (Or requires a 1 surface to adhere to.)
INSTRUCTIONS FOR GLUING ON THE BUMPER FOR PORT TOWNSEND WATERCRAFT S NESTING DINGIES. (Or requires a 1 surface to adhere to.) The PT 11 bumper is made from a high quality, non marking EPDM rubber. This
More informationPAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro
1980 82 PAY N PAK, 1/12 th Scale, Limited Sport Hydro P Sport Hydro Introduction: The 1980 turbine Pay N Pak is a good subject for a model race boat. It has a low profile, mild pickle-fork setback, long
More informationWHITE WOLF. X-ray View MID POWER MODEL ROCKET KIT BUILDING INSTRUCTIONS KIT SPECIFICATIONS:
WHITEWOLF-38 PARTS LIST 1 - Nose Cone 1-17" Airframe 1-6" Motor Tube 3 - Aft Fins 3 - Forward Fins 2 - Centering Rings 1-15" Parachute 2 - launch lugs 1-12 Kevlar Shock Cord 1 - Motor Retention >>(screw/washer)
More informationDornier Do R 4 Super-Wal
Dornier Do R 4 Super-Wal Model Aviation Laddie Mikulasko s Dornier Do R 4 Super-Wal Build the multiengine, record-setting seaplane. Article, plans, instructions, and photos by Laddie Mikulasko. Complete
More informationTugster. Tug Boat. Competition or Sport Tug Kit. A Zippkits R/C Boat. Building Instructions
Z I P P M A N U FA C T U R I N G Tugster Tug Boat Competition or Sport Tug Kit A Zippkits R/C Boat Building Instructions 2016 JMP Hobby Group St. Paul, Indiana 47272 www.zippkits.com Toll Free (866) 922-ZIPP
More informationUse and Installation Instructions
Use and Installation Instructions This is a step by step guide, providing you with complete instruction for a profession installation of the Armstrong Nautical Products RIB Ladder. Please review the instructions
More informationCabinet Free Cover Rest Instructions
PART LIST 2 @ Cabinet Free Lifter Bracket 4 @ 1 5/16 Coupler Tube 2 @ 1-1/8 Bent Arm w/o Foam 2 @ 1-1/8 Bent Arm w/ Foam 2 @ 3/5 Black Tek Screw 2 @ Nylon Pivot Strap 1 @ Cover Saver Package 42 @ Black
More informationADVENTURES WITH. Both of my grandfathers fished, my dad fished, and. creating unique handles for custom rods. 22 RodMaker
From RodMaker Magazine Volume 7 Issue #4 WOOD creating unique handles for custom rods ADVENTURES WITH story by Ray Jergensen photos by Les Jergensen 22 RodMaker Both of my grandfathers fished, my dad fished,
More information767. Remove the clamp to the cable that goes from the glove box to the trunk lock Remove the hose to the windshield washer.
Chapter 22 - Trunk and Tank Painting (Video Clip 22) 766. By this point, many of the items in the trunk have been removed, but I removed the remaining items so the trunk can be cleaned, primed, and painted
More informationOVERVIEW: DESIGN PROCESS:
OVERVIEW: The purpose of this project was to design and build a Rube-Goldberg stamper device that could place a stamp anywhere on a 5 inch by 8 inch piece of paper. The device had to be inefficient and
More informationConstruction Chapters Index
Construction Chapters Index 9 7 8 Chapters Index c. c. c. c. c. c. c7. c8. c9. c0. c. c. c. c. c. c. c7. Balsa Wood Skeleton Strip Planking Hull Fairing Keel Bulb Mould Lead Bulb Casting Keel Construction
More informationMaking an old school lure
Powered by www.big-game-board.info Big Game Fishing Board tutorials presents Thank you very much to Bahama Lures. www.bahama-lures.com Making an old school lure I was inspired to do this by Jim Rizzuto's
More informationUncle John's Choupique Road Sulphur, LA Materials needed to build the basic boat 1/4" x 48" x 96" exterior plywood ~ 3 sheets
Uncle John's 5229 Choupique Road Sulphur, LA 70665 Thank you for purchasing our plans. Have a safe and enjoyable experience building and using your craft. Materials needed to build the basic boat 1/4"
More informationHat s off to you for choosing a kit from Port Townsend Watercraft.
Hat s off to you for choosing a kit from Port Townsend Watercraft. 1 A 30 year fascination with the challenges of nesting boat design, and many prototypes have led to the PT Eleven. Because you chose this
More informationGrandpa's Homemade Rocket for About a Dollar!
Grandpa's Homemade Rocket for About a Dollar! Grandpa and Granny Co. 2012 The most common items needed: (The number of Rocket parts from each item is before the parts name and its proportionate cost is
More informationBlazer Marine, Whiplash Sport 40
Blazer Marine, Whiplash Sport 40 Thank you for choosing to build the Whiplash 40. We have spent over 12 years perfecting this design, and finally we are making it available to the world. We are excited
More informationHow to Make a Unique Industrial-Looking PVC Lamp
How to Make a Unique Industrial-Looking PVC Lamp copyright 2014 by Brooks Owen Owen Publications Battle Ground, WA 98604-0305 USA ALL RIGHTS RESERVED No part of this publication may be reproduced or transmitted
More informationPhoto Essay: How to Build a Nova Scotian Grand Banks Dory By Jeff Spira Plans available at: http://spirainternational.com/ How to Build a Nova Scotian Grand Banks Dory By Jeff Spira In Lunenburg, Nova
More informationConstruction of the Eddie Drifter Versions 1.0 through 1.2
Construction of the Eddie Drifter Versions 1.0 through 1.2 (Revised 20 October 2010 by JiM.) Introduction In the summer of 2010, we began experimenting with alternative drifter designs. While the standard
More informationPre-Paint>Fuselage>Empennage>Fit vertical tail fin. Objectives of this task: Materials and equipment required: Fit the spar extender
Pre-Paint>Fuselage>Empennage>Fit vertical tail fin Objectives of this task: To fit the vertical tail fin to the fuselage, including fitting the static probe, static tube, optional strobe light wiring and
More informationCarving a Custom Seat
Carving a Custom Seat Seat Carving your own seat from mini-cell, high-density foam is really quite simple and has proven to be more comfortable than any commercially produced seat and often more reasonably
More informationBUILDING INSTRUCTIONS
Z I P P M A N U FA C T U R I N G A Zippkits R/C Boat BUILDING INSTRUCTIONS 2010 Zipp Manufacturing Frankfort, New York 13340 www.zippkits.com Table of Contents Introduction 1 Engine Mounting 30 S E C T
More informationSurfboard Repairs Chapter 7
Surfboard Repairs Chapter 7 The Complete Surfing Guide for Coaches - Bruce "Snake" Gabrielson Repair Problems Boards continuously get bumped, hit rocks, break fins, get dropped, and many other things that
More informationMaking Spars for the Schooner Jeanette
Making Spars for the Schooner Jeanette..... by Byron Rosenbaum Figure 1. Byron Rosenbaum s 1:16-scale radio-controlled model of the schooner Jeanette. All photographs by the builder. The spars required
More informationHow Scott Builds a Fighter Kite, May 2011 Updated Sept 2018
How Scott Builds a Fighter Kite, May 2011 Updated Sept 2018 MAKE A TEMPLATE 1. Draw half sail plan on 17x22 pad with 4x4 (1/4 inch) grid. Add ¼ inch extra on nose (for reinforcement) and plenty of extra
More informationAll Purpose Wooden Crate
All Purpose Wooden Crate I built a wooden crate to carry supplies in, such as, propane, ammo, fake explosives, tape and whatever else will fit in it. I would like to say right off the start that this does
More informationCONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill
CONSTRUCTION OF A GUNBOAT A CLASS YACHT by Brian Dill The Gunboat design is the latest Radio A class from Graham Bantock, optimised to provide the best boat speed below 4 knots and to be as good as possible
More informationHillbilly Golf. Included. Game Building Instructions. 2-foot Fence Building Instructions. Bolo making Instructions
Hillbilly Golf Game Building Instructions Included 2-foot Fence Building Instructions Bolo making Instructions Minus Bar Building Instructions and Minus bar play rules Plus some Extras! Hillbilly Golf
More informationEt's Skeg: the full story
Et's Skeg: the full story Having used pie-slice skegs on mass-market boats with big floppy slots and finding them ok, but not ideal, I researched a bit online looking for a skeg or skeg design for my North
More informationWhat s Inside. art. coat. tools. outline top. rails. wood blank. bottom
What s Inside tools wood blank outline top bottom rails art coat What is it? The Alaia is one of the first surfboard designs ever. It is super challenging to surf, but relatively easy and insanely fun
More information8-GUN CORVETTE ASSEMBLY INSTRUCTIONS
8-GUN CORVETTE ASSEMBLY INSTRUCTIONS THE HULL STEP 1 Fasten the Deck to the Hull. Find the hull. This is a large, pink, ship-shaped piece of insulating foam board. This will form the base of your model
More informationAGM 33 PIKE ALL FIBERGLASS. Specifications Length: 92 Diameter 5.5 Weight: 24 lbs Motor Mount: 75mm Fins: 6-3/16 G10 CP: 68 from nose tip Parts List
ALL FIBERGLASS AGM 33 PIKE Specifications Length: 92 Diameter 5.5 Weight: 24 lbs Motor Mount: 75mm Fins: 6-3/16 G10 CP: 68 from nose tip Parts List (1) Filament Wound Nose Cone w/ Metal Tip (1) Nose Cone
More informationTOURNAMENT ICE. 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual
TOURNAMENT ICE 8Ft-Gold Standard Manual Score Home Air Hockey Game Assembly Instructions / Manual Thank you for purchasing a Gold Standard Games product. All of us at Gold Standard Games want you to be
More informationRefinishing two carbon fiber masts
Refinishing two carbon fiber masts Originally re-finishing the masts was going to be Meps' project instead of mine, but it got out of hand. Let me start with a disclaimer: You would all probably like reading
More informationFRAME FEATURES TABLE OF CONTENTS INTRODUCTION
R3 MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9 Seatpost Assembly & Installation...11
More information--- March 12 th, Dear Colleague, Parent, and Team-Member:
--- March 12 th, 2015 Dear Colleague, Parent, and Team-Member: Virginia Western Community College, School of STEM, is pleased to invite you to our Spring Night of Robots, Thursday, April 23 rd, 6 to 8:30
More informationSTEP 1 A. Lay the two Motor Mount Tubes on a flat surface with ends even and Glue them together with White Glue. Allow Glue to set before moving on.
Prod. No. A51003 Skill Level Three QUEST AEROSPACE, INC PO Box 2409 Pagosa Springs, CO 81147 800-858-7302 Things You ll Need To Assemble this Kit: Pencil and Hobby Knife: White Glue: Aliphatic Resin glue,
More informationHow do you build a cardboard boat?
How do you build a cardboard boat? 2015/2016 Campaign Kick-Off 8 th Annual Cardboard Boat Race Saturday, September 12, 2015 Dundee Lake Park Cardboard Boat Race 2015/2016 1 Boat Construction Rules The
More informationOWNER S MANUAL ALWAYS WEAR A GOVERNMENT APPROVED FLOATATION DEVICE WHEN FISHING. Know the limits of your ability and the limits of your equipment.
OWNER S MANUAL ALWAYS WEAR A GOVERNMENT APPROVED FLOATATION DEVICE WHEN FISHING. Know the limits of your ability and the limits of your equipment. Changes in air temperature and elevation could cause the
More informationNICROS-GRANITPANELS INSTALLATION MANUAL
NICROS-GRANITPANELS INSTALLATION MANUAL NICROS, INC. 845 PHALEN BLVD. ST. PAUL, MN 55106 PHONE: 651.778.1975 FAX: 651.778.8080 THANK YOU FOR YOUR PURCHASE OF THIS NICROS PRODUCT Nicros-GranitPanels are
More informationBelow are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project.
Greg Cowens' $10 PVC Roller Reefing for CP-16's by Greg Cowen Below are the instructions to build a roller-furling unit for under $10. Read the entire process before beginning the project. Materials: 2
More informationMax Bee. Part II: Building Max Bee Stunt News 8. lighter: the building of Max. all published.
Max Bee Can you say Exotic? Igor s World Championship winning design has lots of interesting aerodynamics as well as interesting aesthetic design cues. I know, I know, the designing article about Max Bee
More informationFin Shape Science Experiment Kit
Kit #00524 Fin Shape Science Experiment Kit Test Different Fin Shapes to Find Out Which One Performs the Best! P/N Description Qty 10079 AT-18/5.4 (Fin Shape Sci Eng. Mount Tube) 1 10118 AT-33/3 (Payload
More informationV-Tail Flamingo. Included in Kit * Pre- cut balsa parts * Ballast weights * Diagram sheet * Sandpaper sheet
V-Tail Flamingo Included in Kit * Pre- cut balsa parts * Ballast weights * Diagram sheet * Sandpaper sheet Additional Items You May Need * Wood Glue * Epoxy Glue * Sanding block * Hobby knife Overview:
More informationLittle Dog Dual Deploy
Little Dog Dual Deploy John Wilke & Paul Fechtmeister September 2010 All dimensions are in inches unless specified Construction Notes: Other items you will need: One set of epoxy Motor One sheet of 120
More information34. Aft view of the boat at it s highest point.
32. The repaired holes. Still looks pretty ugly, though maybe not quite as bad. The epoxy probably isn t strong enough to make any difference in strength, but you never know of a piece of masking tape.
More information1/10 th Scale 1956 Ted Jones Classic Hydroplane
1/10 th Scale 1956 Ted Jones Classic Hydroplane Preparation These plans show outside sheeting of 3/32 balsa laminated with 1/64 birch ply. This makes a light and strong skin for this boat. Optionally you
More informationInstallation Guide, MPower Echelon Console
Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.
More informationR3 RIM MANUAL EN. Version 1 I
R3 RIM MANUAL EN Version 1 I 07.02.2017 TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Mechanical Cable Routing...7 Electric Cable Routing...9
More informationTrogear Bowsprit Through Hull Installation Manual
Trogear Marine Products, LLC www.trogear.com info@trogear.com 866-616-2978 Trogear Bowsprit Through Hull Installation Manual Congratulations on your purchase of the Trogear Bowsprit which can be installed
More informationAliphatic Resin Wood Glue. 18" Fabric Parachute Part #PNC50 Part # Part #11700 Part #J0016. Launch Lug
ADANCED * What you will need to build the Quest High-Q Hobby Knife * Straight Edge Pencil Aliphatic Resin Wood Sanding Sealer & Brush Spray Paint Parts and exploded view of the Quest High-Q Nose Cone 18"
More informationSuper Sport. Building Instructions Z I P P M A N U FA C T U R I N G. A Zippkits RC Boat. 46 inch Gas Mono Hull
SS Z I P P M A N U FA C T U R I N G Super Sport 46 inch Gas Mono Hull A Zippkits RC Boat Building Instructions 2018 JMP Hobby Group LLC Indiana USA (866) 922-9477 www.zippkits.com 1 D E S I G N C U S T
More informationTABLE OF CONTENTS FRAME FEATURES INTRODUCTION
S3 DISC MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable
More informationBUILDING HANDCRAFTED TABLE TENNIS TABLES
BUILDING HANDCRAFTED TABLE TENNIS TABLES 1 TABLE OF CONTENTS PAGE 5 MESSAGE FROM ITTF PAGE 7 MESSAGE FROM PSF PAGE 9 CONCRETE TABLE PAGE 15 RECYCLED MATERIALS TABLE PAGE 25 WOODEN TABLE ON TRESTLES PAGE
More informationSpecialists in HTM Medical Gas Pipeline Equipment AVSU/Module Operating and Maintenance Instructions
The Area Value Service Units and Module format (AVSU) provide a local gas isolation facility for use during normal installation and maintenance or in the event of an emergency. They are built in accordance
More informationINDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Alignment
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Program: Construction Technology Number of Courses: 22 Date Updated: 09.18.2014 Submitted by: SueEllen Warren, ext. 4519 Renee
More informationweber.cote Pool Paint
weber.cote Pool Paint weber.cote Pool Paint weber.cote Pool Paint is a cement-based, integrally coloured, waterproof finish, specifically formulated for the revamping of marble plastered pools. Applied
More informationBoard Glassing Chapter 6
Board Glassing Chapter 6 The Complete Surfing Guide for Coaches - Bruce "Snake" Gabrielson Glassing Guidelines Like shaping, there is probably any number of ways to successfully glass a blank. Yet there
More informationMoai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes
Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of
More informationDIY Shallow Water Anchor Assembly Instructions for Rods, T-grips, Stainless Tips, Stainless Couplers, and the 4-in-1 Paddle
DIY Shallow Water Anchor Assembly Instructions for Rods, T-grips, Stainless Tips, Stainless Couplers, and the 4-in-1 Paddle All Shallow Water Anchor Parts First, start by laying out and identifying all
More information1982 Hydrostream Viking Restoration
1982 Hydrostream Viking Restoration Part 2c: The Rebuild Daniel W. Rickey Winnipeg, Manitoba Canada daniel@cancercare.mb.ca 2000-09-22 Introduction Part one of this report showed how the shoddy manufacturing
More informationSystem-C Tables Handling, Operation & Maintenance Manual
Burgess Furniture Ltd Hanworth Trading Estate Feltham Middlesex TW13 6EH United Kingdom Tel: +44 (0)20 8894 9231 Fax: +44 (0)20 8894 2943 Email: sales@burgessfurniture.com Web: www.burgessfurniture.com
More informationGrow to Pro Basketball
7208c-0920.qrk /2/02 : PM Page 1 Grow to Pro Basketball Model Number: 7208 Product features and decoration may vary from the photograph above. Please keep this instruction sheet for future reference, as
More informationMade in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:
Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
More informationSPECIAL THANKS TO THE FOLLOWING PEOPLE FOR THEIR HELP IN THIS PROJECT!
The Viper Mark VII is the state of the art fighter of the Colonial Fleet. It is sleeker and more modern than the Viper Mark II. The Mk7 is designed for both space and atmospheric environments and is also
More informationGeneral Build Instructions for Mach 1 BT50 and BT55 Single Fin Kits. Needed Items for Assembly
General Build Instructions for Mach 1 BT50 and BT55 Single Fin Kits 60-80 grit sandpaper Hobby knife Tape measure Scissors CA Super glue 30-minute epoxy 5-minute epoxy Masking tape 1/16 drill bit Needed
More informationBuilding the Japanese Arrow for target archery
Building the Japanese Arrow for target archery The purpose of this paper is to help target archers using a Japanese Yumi bow build accurate arrows for target archery. These arrows will have a period appearance
More informationPART II Building the MDV-1
21 PART II Building the MDV-1 The MDV-1 is a simple, easily driven, seaworthy boat intended for both rowing and power propulsion. Its general-purpose design is suitable for inshore waters around the world.
More informationTips for protecting your equipment Belay devices, descenders
Tips for protecting your equipment Belay devices, descenders You too can help prolong the lifetime of your products. To succeed in this challenge, several aspects must be taken into account: product usage
More informationDIY WORM BIN.
DIY WORM BIN Materials * Gallon Plastic Tote (size depends on number of people in household) * Old screen * Soil (can be from the garden, should be good quality) * Dry leaves, crunched up * Hot Glue Gun
More informationANATOMY OF FUSELAGE REPAIRS
ANATOMY OF FUSELAGE REPAIRS The first part of this file is about doing a repair on the glassed-over fuselage. The latter part covers some repairs on composite fuselages. The glassed-over fuse will stand
More informationFRAME FEATURES TABLE OF CONTENTS INTRODUCTION. A guide to your Cervélo C Series frame.
C SERIES MANUAL TABLE OF CONTENTS Introduction...1 Frame Features...2 Fork Preparation...3 Small Parts...5 Frame Preparation...6 Brake Housing Installation...7 Mechanical Cable Routing...9 Electric Cable
More informationPlans and Instructions to build a folding reflector oven
Plans and Instructions to build a folding reflector oven Kayak2go.com also has folding kayak plans available for purchase. The low cost and ease of construction make the folding kayaks a great youth group
More informationTABLE OF CONTENTS INTRODUCTION
R3 DISC MANUAL TABLE OF CONTENTS Introduction... 1 Frame Features... 2 Fork Preparation... 3 Small Parts... 5 Frame Preparation... 6 Brake Housing Installation... 7 Mechanical Cable Routing... 9 Electric
More informationCardboard Boat Basics
Georgetown Wooden Boat Show 2016 What Floats Your Boat Cardboard Boat Basics 1 Construction Rules (Equal Opportunity) The ENTIRE BOAT must be built of CARDBOARD Only exceptions are the decorations Use
More informationBuild-A-Clock CLOCK CUSTOMIZATION INSTRUCTIONS. One Plan - One Bit, Endless Possibilities. Cut #1. Cut #4 Cut #2. Cut #5 Cut #3
#067 CLOCK CUSTOMIZATION INSTRUCTIONS The Multi-Form Bit makes every clock a one-of-a-kind heirloom Build-A-Clock One Plan - One Bit, Endless Possibilities A l t e r nate Tops Multi-Form Router Bit #177-4005
More informationTrim Tab Wind Vane for boats with transom mounted rudders
Trim Tab Wind Vane for boats with transom mounted rudders If your boat has a transom mounted rudder, you can build this self-steering windvane for around $150, using regular wood working tools and some
More informationVacuum Bagging Wings Instruction Manual Purdue University
Vacuum Bagging Wings Instruction Manual Purdue University Note: Do not leave the vacuum pump running unattended! Revision: Original Release 10/31/15 Vacuum bagged wings are quick to build, light weight,
More informationTHE AMERICAN BARN DOOR KITE
THE AMERICAN BARN DOOR KITE Oregon Kitemaker s Retreat January 2007 Rod Beamguard 4104 NW 112 th Way Vancouver, WA 98685-3578 (360) 574-8050 home (360) 750-9833 office kytfevr@wa-net.com PLANFORM BARN
More informationSailTrack Installation Instructions. CMPE Track
SailTrack Installation Instructions CMPE Track SH-500 SS SH-401 SS SH-200B SS SH-600 SS SH-200A SS www.tidesmarine.com This Tides Marine Sail Track System is used to attach a Tides Track to a bare carbon
More informationWHERE TO INSTALL THIS MIRROR
ROUND LED MIRRORS 3003-L-60 3005-L-60 BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION. 1) General Information Please inspect this product upon delivery. Any missing parts or manufacturing defects
More informationTeak & Holly Installation Amtico (Luxury Vinyl Tile) 1968 Chris Craft Commander 35 Cabin Sole Summer 2017 Matt Cowles;
Teak & Holly Installation Amtico (Luxury Vinyl Tile) 1968 Chris Craft Commander 35 Cabin Sole Summer 2017 Matt Cowles; MC1600@yahoo.com I m providing this write-up to document my installation of Amtico
More informationINSTALLING THE PROWLER 13 RUDDER
INSTALLING THE PROWLER 13 RUDDER Parts Included: Steering Parts: Foot Rail Parts: Rudder Parts: Retraction Parts: 4 Rubber 2 Rail Assemblies Rudder Body 1 Rudder Retraction Grommets (includes steering
More informationHow to Weather and Ballast Track
How to Weather and Ballast Track Presented by Jeffrey Jarr Weathering Track What is a train track comprised of? Weathering Track What does real weathered track look like? Weathering Track What does real
More informationPool Owners Guide. As Recommended by Barrier Reef Pools LLC.
Pool Owners Guide As Recommended by Barrier Reef Pools LLC. Congratulations Congratulations on your choice of a new BARRIER REEF Composite Swimming Pool. BARRIER REEF Composite pools are built to exacting
More informationAegea Assembly Notes:
Aegea Assembly Notes: The Aegea model is a thermal Duration (TD) model made up of components from Phil Barnes 1 (bagged wing and tail group) and Terry Luckenback 2 (Pretty Mantis fuse). Due to its construction
More informationGLIDING ON AIR (1 Hour)
GLIDING ON AIR (1 Hour) Addresses NGSS Level of Difficulty: 4 Grade Range: 3-5 OVERVIEW In this activity, the students will construct a simple hovercraft. They will learn how friction helps or hinders
More informationTRIFECTA. 3 Boat Plans for the Price of 1 - FREE. Assembly Manual. The GUPPY. The TRIPOD. The TADPOLE. Nov.
The GUPPY TRIFECTA 3 Boat Plans for the Price of 1 - FREE Assembly Manual 3 SIMPLE MODULAR BOATS THAT CAN BE NESTED AND EASILY STORED ON-BOARD SHIP, OR IN AN RV, SUV, TRUCK and GARAGE. Less than 5 feet
More informationSPINNAKER POLE TRACK AND GUIDE CONSOLE
1(5) SPINNAKER POLE TRACK AND GUIDE CONSOLE General Assembly single tracks Cut-out for spreader bracket Fitting single guide console Assembly single tracks with bedding Cut-out for spreader bracket Fitting
More informationPRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET
PRO-TEX TRUCKBED LINER TECHNICAL DATA SHEET Check local VOC DESCRIPTION Pro-Tex Truckbed Liner is a professional, two component, urethane liner system that provides a hard, durable finish and superior
More informationFORT WORTH CHRISTIAN SCHOOL School Supply List Pre - K
School Supply List 2018-2019 Pre - K 2 boxes Kleenex Tissue, 85 count 2 set Crayola Washable Thick Classic Markers, 8 count 8 boxes Crayola Crayons, Classic Colors, Small, 8 count 1 each Fiskars Scissors
More informationROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
More informationRANGER PROP BUILDING INSTRUCTIONS & PHOTOS
RANGER PROP BUILDING INSTRUCTIONS & PHOTOS Science under the ice Ice sheet At the international competition, the science under the ice product demonstration will take place under an actual sheet of ice.
More informationBow and Arrows. Materials Needed: ½ PVC cut to length ¼ Dowels cut to 16 length, need 3 of these 1 Water line cut to 4 length Pencil Eraser
At Least Bow and Arrows Materials Needed: ½ PVC cut to 40 42 length ¼ Dowels cut to 16 length, need 3 of these 1 Water line cut to 4 length Pencil Eraser Nylon String cut to 36 length 2 pieces Duck Tape
More informationS110 Steel Level Panel Installation Instructions
S110 Steel Level Panel Installation Instructions NOTE: Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by installer. It is the installer s resposibility
More informationPORTABLE GAMING TERRAIN BOARD
TM PORTABLE GAMING TM Age TERRAIN BOARD 9+ Safety First! Use eye protection, always! Use ear protection with loud power tools Stay with kids while they work! Follow tool manufacturers safety guidelines
More informationTiling And Filling The Pool Student Materials Page 1 of 12
The Pool Part A At last, your parents have finally agreed that it might be possible to put a small pool in the back yard. The only catch is, your parents are very busy and don t have time to spend figuring
More informationConstructing a PVC Flute
Constructing a PVC Flute EQUIPMENT PVC pipe The instructions are for ¾ diameter PVC 480 PSI or 200 PSI. The thickness of the PVC depends on the PSI rating. Corks or dowels that fits into the end of the
More information