The Evans Group NATIONAL E NGINEERING C ORP. Architecture Planning Landscape Architecture Interiors Edgewater Drive Orlando Florida 32804

Transcription

1 NATIONAL E NGINEERING C ORP. Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P: The Evans Group

2

3 D Y H H Y D NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

4 H D Y D Y H D Y H NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

5 The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P: NATIONAL E NGINEERING C ORP.

6 The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P: NATIONAL E NGINEERING C ORP.

7 * NOTE: THIS MATERIAL WAS EXTRACTED BY 3M FIRE PROTECTION PRODUCTS FROM THE 004 EDITION OF THE UL FIRE RESISTANCE DIRECTORY System No. C-AJ-3030 September 03, 004 (Formerly System No. 30) F Ratings - 1-1/, and 3 Hr (See Item 5) T Rating - 0 Hr L Rating At Ambient - 19 CFM/sq ft L Rating At 400 F - 9 CFM/sq ft A REVISIONS ZONE REV DESCRIPTION DATE APPROVED 1. Floor or Wall Assembly - Min -1/ in. thick lightweight or normal weight ( pcf) concrete. Wall may also be constructed of any UL Classified Concrete Blocks*. Max diam of opening is 8 in. See Concrete Blocks (CAZT) category in the Fire Resistance Directory for names of manufacturers.. Sleeve (Optional) - Nom 8 in. diam (or smaller) Schedule 40 (or heavier) steel pipe or nom 6 in. diam (or smaller) Schedule 40 polyvinyl chloride (PVC) pipe cast into floor or wall assembly. Sleeve to be flush with or project max in. from top surface of floor or both surfaces of wall. When PVC sleeve is used, max cable conductor size is No. 1 AWG. 3. Cables - Aggregate cross-sectional area of cables to be min 10 percent to max 40 percent of the cross-sectional area of the opening. Cables to be rigidly supported on both sides of the floor or wall assembly. Any combination of the following types and sizes of cables may be used: A. Max 1000 kcmil single-conductor copper or aluminum power cable; cross-linked polyethylene insulation. B. Max No. /0 AWG multiconductor copper or aluminum power cables; cross-linked polyethylene, polyvinyl chloride, neoprene rubber, hypalon or silicone rubber insulation and jacket materials. C. Max No. 1 AWG multiconductor copper control cables; cross-linked polyethylene, polyvinyl chloride, neoprene rubber, hypalon or silicone rubber insulation and jacket materials. D. Max 400 pair No. 4 AWG copper telephone cables; polyvinyl chloride insulation and jacket materials. E. Multiple fiber optical communication cable jacketed with PVC and having a max outside diam of 5/8 in. F. Max 00 pair No. AWG (or smaller) copper conductor with polyvinyl chloride (PVC) insulation and jacketing material. G. Max 3/C No. 3/0 AWG (or smaller) copper or aluminum conductor SER cables with PVC insulation and jacket. H. Max 3/C No. /0 AWG (or smaller) copper conductor PVC jacketed aluminum clad or steel clad TECK 90 cable. I. Max 3/C with ground No. 8 AWG (or smaller) copper conductor NM cable with PVC insulation and jacket. J. RG/U coaxial cable with fluorinated ethylene (FE) or PVC insulation and jacket. K. Max 4 pair No. 4 AWG (or smaller) copper conductor data cable with Hylar jacket and insulation. L. Max 3/C No. 1 AWG (or smaller) MC (BX) copper cable with polyvinyl chloride insulation and jacket materials. M. Through Penetrating Product* - Any cables, Armored Cable+ or Metal Clad Cable+ currently Classified under the Through Penetrating Product category. See Through Penetrating Product (XHLY) category in the Fire Resistance Directory for names of manufacturers 4. Packing Material - Min 1 in. thickness of mineral wool batt insulation firmly packed into opening as a permanent form. Packing material to be recessed from top surface of floor or sleeve or from both surfaces of wall or ends of sleeve as required to accommodate the required thickness of fill material (Item 5). 5. Fill,Void or Cavity Material* - Caulk or Sealant - Applied to fill the through opening to a min thickness of 1 in. flush with the top surface of the floor or sleeve or both surfaces of wall or ends of sleeve. Caulk or sealant to be forced into interstices of cable group to max extent possible. F Rating of firestop systems is dependent upon the through opening size, the thickness of the concrete, the sleeve type and percent cable fill, as tabulated below: * THIS MATERIAL WAS EXTRACTED BY 3M FIRE PROTECTION PRODUCTS, FROM THE 00 EDITION OF THE UL FIRE RESISTANCE DIRECTORY SYSTEM NO. C-AJ-1044 (FORMERLY SYSTEM NO. 319) F RATINGS--, 3, AND 4 HR (SEE ITEMS A AND 4) T RATING--0 HR L RATING AT AMBIENT-- CFM/sq ft L RATING AT 400 F--LESS THAN 1 CFM/sq ft A The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P: A 3 SECTION A-A 4 A SECTION A-A 3 Min Floor or Wall Thkns In. Nom Pipe Tube or Conduit Diam In. Max Annular Space In. Min Caulk Thkns In. F Rating Hr -1/ 1/-1 1 to 3/8 1/ -1/ 1/-1 3 to 1/ / 1/-6 1 to 3/8 1/4 (a) 4-1/ 1/-1 1 to 1/4 1/ 3 4-1/ 1/ / 1/ / 1/-1 3-1/ / / 1/-6 1-3/8 1 (b) 4 CONSULT CURRENT INDEPENDENT LABORATORIES (UL, OPL) FOR SYSTEMS OR DESIGN DETAILS 3M COMPANY - CP 5WB+ caulk or FB-3000 WT sealant. *Bearing the UL Classification Marking PROJECT SHT 1 of 1 SIGNATURE DATE CAJ3030.DWG SYSTEM/DESIGN NO. DATE NOT FOR USE AS C-AJ-3030 CONSTRUCTION DOCUMENT. DRAWING NOT 3M FIRE PROTECTION PRODUCTS TO SCALE All statements, technical information and recommendations contained herein are based on tests we believe reliable, however, since the conditions of use and application are beyond out control, 3M shall not be liable for any damage, direct or consequential, resulting from the use of this material or design. 3M's only warranty shall be to replace any of our products proved to be defective CONSULT CURRENT UNDERWRITERS LABORATORIES "FIRE RESISTANCE DIRECTORY" FOR DETAILS. All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, however, since the conditions of use and application are beyond our control, 3M shall not be liable for any damage, direct or consequential, resulting from the use of this material or design. 3M's only warranty shall be to replace any of our products proved to be defective. 3M Fire Protection Products PAGE 1 OF 1 UL SYSTEM NO. C-AJ-1044 NOT FOR USE AS A CONSTRUCTION DOCUMENT. DRAWING NOT TO SCALE. * NOTE: THIS MATERIAL WAS EXTRACTED BY 3M FIRE PROTECTION PRODUCTS FROM THE 004 EDITION OF THE UL FIRE RESISTANCE DIRECTORY REVISIONS ZONE REV DESCRIPTION DATE APPROVED * NOTE: THIS MATERIAL WAS EXTRACTED BY 3M FIRE PROTECTION PRODUCTS FROM THE 004 EDITION OF THE UL FIRE RESISTANCE DIRECTORY REVISIONS ZONE REV DESCRIPTION DATE APPROVED SYSTEM NO.W-L-3110 SEPTEMBER 07, 004 F RATINGS - 1 AND HR (SEE ITEM 1) T RATING - 0 HR 1A SYSTEM NO. W-L-1001 (FORMERLY SYSTEM NO. 147) F RATING--1,, 3, AND 4 HR (SEE ITEMS AND 3) T RATINGS--0, 1,, 3, AND 4 HR (SEE ITEM 3) L RATING AT AMBIENT--LESS THAN 1 CFM/sq ft L RATING AT 400 F--LESS THAN 1 CFM/sq ft A 3 1A 3 A 3 1B A 3 A 1B SECTION A-A SECTION A-A +When copper pipe is used, T Rating is 0 h. MINNESOTA MINING & MFG CO - CP 5WB+. *Bearing the UL Classification Marking CONSULT CURRENT INDEPENDENT LABORATORIES (UL, OPL) FOR SYSTEMS OR DESIGN DETAILS PROJECT SHT 1 of 1 SIGNATURE DATE WL3110.DWG SYSTEM/DESIGN NO. DATE NOT FOR USE WL-3110 AS CONSTRUCTION DOCUMENT. DRAWING NOT 3M FIRE PROTECTION PRODUCTS TO SCALE All statements, technical information and recommendations contained herein are based on tests we believe reliable, however, since the conditions of use and application are beyond out control, 3M shall not be liable for any damage, direct or consequential, resulting from the use of this material or design. 3M's only warranty shall be to replace any of our products proved to be defective CONSULT CURRENT INDEPENDENT LABORATORIES (UL, OPL) FOR SYSTEMS OR DESIGN DETAILS PROJECT SHT 1 of 1 SIGNATURE DATE WL-1001.DWG SYSTEM/DESIGN NO. DATE NOT FOR USE WL-1001 AS CONSTRUCTION DOCUMENT. DRAWING NOT 3M FIRE PROTECTION PRODUCTS TO SCALE All statements, technical information and recommendations contained herein are based on tests we believe reliable, however, since the conditions of use and application are beyond out control, 3M shall not be liable for any damage, direct or consequential, resulting from the use of this material or design. 3M's only warranty shall be to replace any of our products proved to be defective NATIONAL E NGINEERING CORP.

8 UP Utility Cabinet Utility Cabinet UP COVERD PARKING COVERD TACO STAND EXIT COVERED EXIT GAS PUMP ISLAND PARKING BUS PARKING OFFICE FUEL ISLAND ATTENDANTS OFFICE SIGNAGE AND 6'-0" WALL NATIONAL E NGINEERING C ORP. Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P: The Evans Group UP

9

10 OFFICE TACO STAND EXIT COVERD COVERD EXIT PARKING GAS PUMP ISLAND BUS PARKING FUEL ISLAND ATTENDANTS OFFICE SIGNAGE AND 6'-0" WALL PARKING COVERED NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

11 OFFICE TACO STAND EXIT COVERD COVERD EXIT PARKING GAS PUMP ISLAND BUS PARKING FUEL ISLAND ATTENDANTS OFFICE SIGNAGE AND 6'-0" WALL PARKING COVERED NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

12 Cabinet Utility (3-1) ADT-090 (4-1) HGT-10 Utility Cabinet OFFICE TACO STAND EXIT COVERD COVERD EXIT (6-1) 1' O3IM Beverage Island (MA10) 8' Self Service Sea Food (MA10) 8' Self Service Sea Food 6' Ceviche Case (MA101) (33-1) WK-155 (33-) WK-155 (33-3) WK-155 (33-4) WK-155 UP (7-1) LET-180 (MA100) 1' Self Service Meat (7-) LET-180 (MA100) 1' Self Service Meat (MA100) 1' Self Service Meat (1-1)8' SSA Service Cheese (1-)1' SSA Service Cheese (1-6) 4' SSA Service Cheese SERVICE CHEESE & DELI (1-5)8' SSA Service Cheese (1-4)1' SSA Service Cheese (35-1) OWEZV Meat Medium (35-4) OWEZV Meat Medium (35-3) 1' OWIZV Meat Medium (35-) 1' OWIZV Meat Medium (1-3)8' SSA Service Cheese (-1) 5 Drs ORZ Frozen Food (-) 5 Drs ORZ Frozen Food (-3) 5 Drs ORZ Frozen Food (-4) 4 Drs ORZ Frozen Food (3-1) LLE-170 (MA100) 1' Self Service Meat 11 (6-1) ADT-156 (MA100) 1' Self Service Meat 10 9 (11-1)1' O5DMH Beer (11-)1' O5DMH Beer (11-3)1' O5DMH Beer (9-1)1' OHPH Produce (5-6) 4' Op Produce (5-1) 8' Op Produce (5-) 1' Op Produce (5-5) 8' Op Produce (5-4) 1' Op Produce (9-)1' OHPH Produce (9-3)1' OHPH Produce (10-1)1' O5DMH Wine (9-4)1' OHPH Produce (7-1) LLE136 (7-) LLE-136 (8-1) ADT-156 (8-) ADT-156 (30-1) ADT-140 (30-) ADT140 (0-1)1' OHMH Meat (1-1)1' O5DM Salt Meat (-1)1' O5DM Dairy (-)1' O5DM Dairy (-3)1' O5DM Dairy (-4)1' O5DM Dairy (-5)1' O5DM Dairy UP (8-1)1' O3IM Dessert Island (5-3) 8' Op Produce (3-1)1' O5DM Juice (3-)1' O5DM Cut Fruit 8' Cake Display Case HV96R 8' Cake Display Case HV96R 8' Cake Display Case HV96R 8' Cake Display Case HV96R UP (34-1) ADT-070 (5-1) HGT-080 PARKING COVERED GAS PUMP ISLAND PARKING BUS PARKING FUEL ISLAND ATTENDANTS OFFICE SIGNAGE AND 6'-0" WALL NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

13 Utility Cabinet Utility Cabinet NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

14 NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

15

16

17

18

19 OFFICE TACO STAND EXIT COVERD COVERD EXIT S PARKING GAS PUMP ISLAND BUS PARKING FUEL ISLAND ATTENDANTS OFFICE SIGNAGE AND 6'-0" WALL COVERED PARKING NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

20

21 NATIONAL E NGINEERING C ORP. The Evans Group Architecture Planning Landscape Architecture Interiors 305 Edgewater Drive Orlando Florida 3804 P:

22

23

24

25

26

27

28

29