Water Tank Inspection Standards & Guidelines
|
|
- Jasmin Paul
- 5 years ago
- Views:
Transcription
1 Water Tank Inspection Standards & Guidelines Penni Snodgrass Sales and Marketing Manager
2 American Water Works Association (AWWA) National Fire Protection Association (NFPA)
3 AWWA D (retired) Inspecting and Repairing Steel Water Tanks, Standpipes, Reservoirs, and Elevated Tanks, for Water Storage First Edition 1953 Reaffirmed without revision in 1986 Withdrawn December, 1998 Currently undergoing complete revision
4 AWWA D101 Inspection of Water Tanks and Related Facilities Committee Chair Chip Stein, TIC
5 How AWWA Standards are Developed
6 AWWA Standards are not Specifications Endorsement Recommendation
7 Standards vs Specs Standards - minimum technical requirements ( i.e. the what ) Specifications the contractual relationships ( i.e. when and by whom and through standards and supplemental requirements the what )
8 AWWA Standards are Guidelines Solid Base Frequently cited in project specifications A reliable source of information
9 Standards-Making Process Standards Committee Producer Group Consumer Group General Interest
10 Standards-Making Process Committee Consensus Sent to Standards Council, if approved Published for Review and Comment Sent to Executive Committee Published start the process all over
11 Committee Consensus Standards Council Five-Year Review/Revision Publish Public Review and Comment Executive Committee
12 What s Happening in the D101 Committee??
13 Types of Structures Clearwells Concrete Tanks Bolted Tanks Membrane Covered Reservoirs Stainless Steel Tanks (bolted and welded) Filter Beds Hydropneumatic Tanks (operating at less than 15 psi) Clarifiers Current Market Demand
14 Proposed Foreword Stated Purpose of Standard Asset Management Approach Goal of Sustainability References to C652, D100, D102, D103, D107, D110
15 Proposed Section A Elements of Facilities Nomenclatures Elements
16 Proposed Section B Inspection of New Construction Soils/Geotech Documentation/Work-In-Process Evaluation Reporting Inspections specific to type of construction Welding Concrete Placement Coatings
17 Proposed Section C Inspection of Existing Structures Frequency Coatings Structural Sanitary Safety Tank and Site Security Reporting Requirements
18 Inspection Methods Underwater Tank Evaluation In-Service Cleaning, as it relates to the inspection of the structure Rafting Commentary Checklist - advantages and disadvantages of Dive, ROV, and Drained Methods Commentary - Owner Specify Motivation for having Tank Inspected
19 Accessories Cathodic Protection Mixing Systems
20 Proposed Section D Inspection of Existing Tank Rehabilitation Submittal Review Appurtenance and Welding Repairs Repairs Surface Preparation Emission and Overspray Containment Air Monitoring Environmental and Personnel Air Safety Coating Application Ventilation during Coating Application Documentation/Work-In-Process Evaluation Reporting Punch Lists
21 Proposed Section E First Anniversary Evaluation Minimum requirements for how this evaluation should be conducted and reported Type Drained, ROV, Dive Disinfection Reporting
22 Proposed Section F Qualifications Engineering Firm Experience Insurance Licensed Engineer Inspector Experience Climbing Ability Association Certifications (NACE, SSPC)
23 Proposed Appendices Bibliography Organizations Cold Weather Operation of Water Tanks Cellular Antennas Considerations Site Selection Tank Style Analysis Tank Sizing Considerations Sample Inspection Forms Inspection Certifications and Associations Commentary
24 AWWA M42 Steel Water-Storage Tanks First Edition 1988 Latest Revision 2012 Frequency (3 to 5 years) Inspector Qualifications Inspection Scope AWWA D101 Referenced in Appendix C Revision Chair, Chip Stein, TIC
25 Steel Water Storage Tanks Published by McGraw Hill in conjunction with AWWA Technical Editor Steve Meier Chapter Author Chip Stein Chapter Author Jennifer Coon
26 NFPA 25 (2017) Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems Frequency Daily Heating System Weekly Water Temperature Monthly Water Level Quarterly Tank Exterior, Support Structure, Catwalks/Balconies, Ladders, Site Annually Expansion Joints, Coatings Interiors 3 years vs 5 years
27 NFPA and AWWA Differences Frequency Site Evaluation (combustible storage, brush, fire exposure hazard) NFPA addresses all types of tank construction NFPA requirements not found in AWWA Holiday Detection Underbottom Ultrasonic Testing (or Coupon Removal) Vacuum-Box Testing of Floors (NFPA 22)
28 Questions?
The Facts about Water Tank Diving Evaluations. Jennifer Coon, CSP, CHMM, CET Safety Director Tank Industry Consultants
The Facts about Water Tank Diving Evaluations Jennifer Coon, CSP, CHMM, CET Safety Director 2 OSHA Regulation Contributing Factors 3 Diver Fatalities - 2008 to 2013 Ranked in Order of Frequency 1. Insufficient
More informationDIVER INSPECTION REPORT Canyon South, Raw Water Tank
City of Glenwood Springs 101 West 8th Street, Glenwood Springs, CO 81601 DIVER INSPECTION REPORT Canyon South, Raw Water Tank 10.23.2012 250,000 Gallon on-grade WELDED STEEL RESERVOIR Summary of Contents:
More informationComposite Elevated Tanks for Water Storage
SM ANSI/AWWA D107-16 (Revision of ANSI/AWWA D107-10) AWWA Standard Composite Elevated Tanks for Water Storage Effective date: Jan. 1, 2017. First edition approved by AWWA Board of Directors Jan. 17, 2010.
More informationPiped Air SCBA Refilling System Standard
WALT WHITE Fire Chief 5770 Freeport Blvd., Suite 200 Sacramento, CA 95822-3516 Ph: (916) 808-1300 Fax: (916) 808-1629 www.sacfire.org Piped Air SCBA Refilling System Standard SCOPE: This specification
More informationAirfix D-E-B Installation and operating instructions
www.flamco.nt-rt.ru Airfix D-E-B Installation and operating instructions Dear Customer, With the Airfix D-E-B membrane expansion vessel you have acquired a Flamco quality product. This expansion vessel
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationAccreditation for In-Service Inspection of Pressure Systems/Equipment
RG 2 Edition 5 November 2018 - Draft for consultation Accreditation for In-Service Inspection of Pressure Systems/Equipment RG 2 / Edition: 5 Page 1 of 10 Contents 1. Introduction 2 2. Scope - Inspection
More informationISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing
INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et
More informationAustralian/New Zealand Standard
AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationAnnex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-11027-03-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 14.02.2017 to 13.02.2022 Date of issue: 08.06.2017
More informationISO 6406 INTERNATIONAL STANDARD. Gas cylinders Seamless steel gas cylinders Periodic inspection and testing
INTERNATIONAL STANDARD ISO 6406 Second edition 2005-02-01 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing Bouteilles à gaz Bouteilles à gaz en acier sans soudure Contrôles et
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26055-2 SOUTH AFRICAN NATIONAL STANDARD Transportable pressure receptacles for compressed, dissolved and liquefied gases Basic design, manufacture, use and maintenance Published by SABS
More informationQUALITY ASSURANCE SPECIFICATION NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7
QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 NONDESTRUCTIVE EXAMINATION PAGE 1 OF 7 1.0 Purpose The purpose of this specification is to establish the minimum quality assurance requirements
More informationTo: Mayor Pat Humphrey and the Clare City Commission From: Ken Hibl, City Manager Date: September 1, 2016 Regarding: City Manager's Report
AGENDA REPORT To: Mayor Pat Humphrey and the Clare City Commission From: Ken Hibl, City Manager Date: September 1, 2016 Regarding: City Manager's Report For the Agenda of September 6, 2016 Depot Crowd
More informationGSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS)
GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) Local Exhaust Ventilation Inspection & Maintenance 1 LOCAL EXHAUST AND OTHER VENTILATION Contents 1. Introduction 2. Design specifications
More informationSteam System Best Practices 14 Best Practices for Guide Lines for Boiler Plant Log Books
Steam System Best Practices 14 Best Practices for Guide Lines for Boiler Plant Log Books 1. SCOPE OF BOILER LOGBOOK PROGRAM In all cases, there are minimum tasks and functions for an operator to perform
More informationGuidelines for Pressure Boundary Bolted Flange Joint Assembly
ASME PCC-1 2010 (Revision of ASME PCC-1 2000) Guidelines for Pressure Boundary Bolted Flange Joint Assembly A N A M E R I C A N N A T I O N A L S T A N D A R D ASME PCC-1 2010 (Revision of ASME PCC-1 2000)
More informationAmador Circle Tank. City of Rio Vista. Report of Findings From the Diving Operations Conducted on. March 28, 2011
City of Rio Vista Report of Findings From the Diving Operations Conducted on March 28, 2011 By LiquiVision Technology DIVING SERVICES 711 Market Street, Klamath Falls, OR 97601, (800) 229-6959 www.divingservices.com
More informationSUN PEAKS FIRE RESCUE
SUN PEAKS FIRE RESCUE Everyone Goes Home Welcome to Sun Peaks Fire Rescue On behalf of all of the members of Sun Peaks Fire Rescue, I would like to thank you for expressing interest in our department.
More informationRegulated Oil and Gas Companies under National Energy Board Jurisdiction
File 185-A000-41 8 August 2003 Regulated Oil and Gas Companies under National Energy Board Jurisdiction Dear Sir / Madam: Guidance Notes for Pressure Equipment under National Energy Board Jurisdiction
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16148 Second edition 2016-04-15 Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for
More informationAustralian/New Zealand Standard
AS/NZS 1715:2009 AS/NZS 1715:2009 Australian/New Zealand Standard Selection, use and maintenance of respiratory protective equipment AS/NZS 1715:2009 This Joint Australian/New Zealand Standard was prepared
More informationRequirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants
the pressure equipment safety authority Requirements for Reduced Supervision of Power Plants, Thermal Liquid Heating Systems, and Heating Plants AB-528 Edition 2, Revision 1 Issued 2016-09-12 Table of
More informationInternational Maintenance Review Board Policy Board (IMRBPB) Issue Paper (IP) Initial Date: 29/04/2011 IP Number: 117 Revision / Date:
Title: Submitter: Clarification of Glossary Definitions for General Visual (GVI), Detailed (DET), and Special Detailed (SDI) Inspections David Lawton (Gulfstream Aerospace LP) Issue: The existing glossary
More informationAustralian/New Zealand Standard
AS/NZS 4488.2:1997 Australian/New Zealand Standard Industrial rope access systems Part 2: Selection, use and maintenance AS/NZS 4488.2:1997 This Joint Australian/New Zealand Standard was prepared by Joint
More informationBODY OF KNOWLEDGE API TES TANK ENTRY SUPERVISOR
BODY OF KNOWLEDGE API TES TANK ENTRY SUPERVISOR CERTIFICATION EXAMINATION November 2018 (Replaces November 2015) This API Individual Certification Examination is designed to identify applicants possessing
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
F. INTERPRETATION OF THE ESSENTIAL SAFETY REQUIREMENTS ON MANUFACTURING Guideline F-01 Guideline related to: Annex 1 Section 3.1.2 According to section 3.1.2 (permanent joining) of Annex I, the third party
More informationBODY OF KNOWLEDGE TANK ENTRY SUPERVISOR CERTIFICATION PROGRAM Revision 2, October 2013
BODY OF KNOWLEDGE TANK ENTRY SUPERVISOR CERTIFICATION PROGRAM Revision 2, October 2013 This API Individual Certification Examination is designed to identify applicants possessing the required knowledge
More informationStandards of Practice Personal Protective Equipment
Document Authority: I. PURPOSE Standards of Practice Personal Protective Equipment Whenever feasible, hazards must be eliminated through engineering, and/or administrative controls, prior to resorting
More informationELKHART BRASS MANUFACTURING COMPANY
ELKHART BRASS MANUFACTURING COMPANY INSTALLATION and OPERATING INSTRUCTIONS for MODEL UP PRESSURE RESTRICTING HOSE VALVES I. Models and Sizes Covered: UP-20, 1-1/2" size UP-25, 1-1/2" size UP-20, 2-1/2"
More informationThe purpose of this brochure is to explain to owners and contractors the City of Burnaby s requirements for private swimming pools.
Building Information BURNABY PLANNING & BUILDING DEPARTMENT Swimming Pools The purpose of this brochure is to explain to owners and contractors the City of Burnaby s requirements for private swimming pools.
More informationProcedure: Pressure equipment safety
Procedure: Pressure equipment safety Purpose The purpose of this procedure is to define the method for safe operation and inspection of pressure equipment and the collection and recording of associated
More information2018 Spring Refining and Equipment Standards Meeting
2018 Spring Refining and Equipment Standards Meeting April 16-19, 2018 Sheraton Seattle Hotel Seattle, Washington www.api.org/meetings Current as of March 25, 2018 Subject to change SOME Pre- & Post-Week
More informationAssessment of Ships and Managers for the Acceptance of Extended Interval Between Bottom Surveys in Dry-Dock
CLASSIFICATION NOTES No. 72.2 Assessment of Ships and Managers for the Acceptance of Extended Interval Between Bottom Surveys in Dry-Dock MAY 2012 The electronic pdf version of this document found through
More informationCommandant IN-SERVICE INSPECTION PROGRAM (ISIP) FOR FLOATING FACILITIES IN THE OUTER CONTENENTAL SHELF (OCS)
U.S. Departmen~ of Transportation United States Coast Guard Commandant 2100 2nd Street, S.W. United States Coast Guard Washington, D.C. 20593-0001 Staff Symbol: G-MOC-2 Phone: (202) 267-2978 FAX: (202)
More information22. Specialty Valves.
22. Specialty Valves. a. Types of Specialty Valves. 1) Use of the following specialty valves is covered in this section: Altitude Valve, Pressure Reducing Valve, Pressure Relief Valve, Swing Check Valve,
More informationNATURAL GAS MAINTENANCE. Part 192 Subpart "M"
NATURAL GAS MAINTENANCE Part 192 Subpart "M" CONTACT INFORMATION Pamela West Pipeline Safety Specialist U.S. Department of Transportation PHMSA Inspector Training and Qualifications Main: (405) 686-2310
More informationAS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 2: Surface supplied diving to 30 m
AS/NZS 2815.2:2013 Australian/New Zealand Standard Training and certification of occupational divers Part 2: Surface supplied diving to 30 m AS/NZS 2815.2:2013 AS/NZS 2815.2:2013 This Joint Australian/New
More informationTECHNICAL DATA OBSOLETE
June 1, 2008 Foam 240a 1. DESCRIPTION The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning system. It requires no external power, other than the water pressure to ensure
More informationFALL PROTECTION
115500 FALL PROTECTION PART 1 GENERAL 1.01 General A. Cornell University seeks to prevent exposures to fall hazards whenever possible and protect personnel that may be exposed to fall hazards. Therefore,
More informationCITY OF HIAWATHA, IOWA Volunteer Firefighter EMT
CITY OF HIAWATHA, IOWA Volunteer Firefighter EMT DATE: Adopted 08/07, Revised 01/16 CLASSIFICATION: SALARY GROUP/GRADE: DEPARTMENT: Exempt N/A Fire JOB DESCRIPTION: Summary/Objective Responsible for the
More informationGuide for Evaluating Your Hose Assembly Supplier
Guide for Evaluating Your Hose Assembly Supplier Supplier Evaluation Checklist, and How to Clearly Define Application Requirements Safe, reliable hose assemblies require appropriate specification work
More informationStandard Pneumatic Test Procedure Requirements for Piping Systems
the pressure equipment safety authority Standard Pneumatic Test Procedure Requirements for Piping Systems AB-522 Edition 2, Rev. 1 Issued 2016-10-24 Table of Contents FOREWORD... 1 1.0 INTRODUCTION...
More informationPIP PNE00012 Piping Examination and Leak Test Guide
October 2017 Piping PIP PNE00012 Piping Examination and Leak Test Guide PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34475-7 ISO 10460:2005 SOUTH AFRICAN NATIONAL STANDARD Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing This national standard is the identical implementation
More informationConsult with manufacturers concerning permeation of the pipe walls, jointing materials, valve seats, etc.
Design Manual Chapter 4 - Water Mains 4C - Facility Design 4C-1 Facility Design A. General Water mains and appurtenances, including hydrants and valves, should be provided along all streets including connections
More informationIFC 2015 CODE AND COMMENTARY. The complete IFC with commentary after each section VOLUME 2
IFC 2015 CODE AND COMMENTARY VOLUME 2 The complete IFC with commentary after each section 2015 International Fire Code Commentary First Printing: July 2015 ISBN: 978-1-60983-286-5 (soft-cover edition)
More informationTABLE OF CONTENT
Page : 1 of 12 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationStandard Recommended Practice. Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape
NACE Standard RP0287-2002 Item No. 21035 Standard Recommended Practice Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape This NACE International standard
More informationAED Program 2017 January 2017
AED Program 2017 January 2017 Contents Purpose...1 Definitions...1 Scope and Applicability...1 Duties and Responsibilities...1 AED Coordinator...1 Alternate AED Coordinator...2 AED Owner...2 AED Director...2
More informationINSPECTION OF RECOVERY BOILERS
INSPECTION OF RECOVERY BOILERS W. B. A. (Sandy) Sharp SharpConsultant, Columbia, Maryland, U.S.A. TAPPI Kraft Recovery Short Course St. Petersburg, Florida, January 7-10, 2008 OUTLINE Purpose of inspections
More informationFlamco Airfix D-E. Installation and operating instructions. 1999, Flamco eps
Airfix D-E 6442.eps GB Installation and operating instructions 1999, Exclusion of liability All operation and maintenance related technical information, data and instructions contained in these installation
More informationMoai Bike Rack Heavy Duty Submittal Sheet. Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Capacity: Mount Options: Setbacks: 2 Bikes
Submittal Sheet Materials: 2.0 Schedule 40 Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available. Powder Coat Our powder coat finish assures a high level of
More informationNational Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org M E M O R A N D U M TO: FROM: NFPA Technical Committee on Water Tanks
More informationCURI Pierside Stainless Diesel Tank
Mechanical Integrity Report for the CURI Pierside Stainless Diesel Tank at 208 North Palmetto Boulevard Clemson, South Carolina 29631 Inspection: 26 September 2012 Prepared by: George E. Matthews, E.I.T.
More informationDESIGN DATA A WET PIPE BLADDER TANK FOAM/WATER SYSTEM WITH HYDRAULICALLY ACTUATED DELUGE CONCENTRATE CONTROL VALVE
February 9, 1998 Foam 101a A BLADDER TANK WITH 1. DESCRIPTION A Wet Pipe Bladder Tank Foam/Water System is a standard wet pipe automatic sprinkler system capable of discharging a foam/water solution automatically
More informationISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition
INTERNATIONAL STANDARD ISO 11625 Second edition 2007-08-15 Gas cylinders Safe handling Bouteilles à gaz Sécurité de manutention Reference number ISO 2007 PDF disclaimer This PDF file may contain embedded
More informationRESPIRATORS & FIT TESTING
RESPIRATORS & FIT TESTING Presented By: Jamie Papian Licensed Lead & Asbestos Inspector Licensed Lead & Asbestos Abatement Supervisor HUD Housing Quality Standards Inspector State of Iowa, Illinois and
More informationWater Mist Systems Inspection, Testing, and Maintenance of Water Mist Systems
Water Mist Systems Inspection, Testing, and Maintenance of Water Mist Systems Name of Property: Address: Phone Number: Inspector: Contract No.: Date: This Report Covers: Monthly Quarterly Annual Other
More informationMade in U.S.A. Narrow-U Bike Rack Heavy Duty Submittal Sheet. Materials: Finishes: Mount Options: Setbacks:
Submittal Sheet Materials: 2 Schedule 40 Steel Pipe (2.375 OD) Finishes: Galvanized An after fabrication hot dipped galvanized finish is available Powder Coat Our powder coat finish assures a high level
More informationPrepared By: Environmental. File Name: WEL-ESOP Effective Date: 17 Sep 2007 Document Owner: EMD
Environmental Standard Operating Procedure Originating Office: Revision: Prepared By: Approved By: MCAS Miramar Environmental Original Environmental Management Department William Moog Management Department
More informationGeneral Safety and Health Provisions for Construction Self Inspection Checklist
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: General Safety and Health Provisions for Construction Self Inspection Checklist Instructions:
More informationAustralian/New Zealand Standard
AS/NZS 1716:2003 (Incorporating Amendment No. 1) AS/NZS 1716:2003 Australian/New Zealand Standard Respiratory protective devices AS/NZS 1716:2003 This Joint Australian/New Zealand Standard was prepared
More informationFlorida Senate SB 1694 By Senator Haridopolos
By Senator Haridopolos 1 A bill to be entitled 2 An act relating to swimming pool/spa 3 contractors and service technicians; amending 4 s. 489.105, F.S.; revising the scope of work 5 for commercial and
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Butterfly Valves C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 15103 - Butterfly Valves C O N T E N T S PART 1 - GENERAL... 1 1.01 REQUIREMENT... 1 1.02 VALVE MANUFACTURER... 1 1.03 GUARANTEE... 1 PART 2 - PRODUCT... 1
More informationAS SSA AS SSA Australian Standard. Australian Fish Names Standard. This is a free 8 page sample. Access the full version online.
AS SSA 5300 2007 AS SSA 5300 2007 Australian Standard Australian Fish Names Standard This Australian Standard was prepared by Seafood Services Australia Limited. As an accredited Standards Development
More informationChapter 23 Public Access Defibrillation Program Automated External Defibrillators
Chapter 23 Public Access Defibrillation Program Automated External Defibrillators 23.1 Foreword 23.2 Introduction Table of Contents 23.3 Roles and Responsibilities 23.1.1 Emergency Response Team Program
More informationWater Facility Maintenance. Using Diving Operations
Water Facility Maintenance Using Diving Operations For years Aquatech Diving Services has been performing potable water facility maintenance projects such as inspections, cleanings, valve repairs, line
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More information1 Exam Prep. Tabs and Highlights
1 Exam Prep NFPA 14: Standard for the Installation of Standpipe and Hose Systems Tabs and s These 1 Exam Prep tabs are based on the NFPA 14: Standard for the Installation of Standpipe and Hose Systems,
More informationBermad Pressure Reducing. Model: 42T
Bermad Pressure Reducing Pilot Operated Pressure Control Valve Model: 42T Installation Operation Maintenance Manual (IOM) REV. 27.7.17 Page 1 of 12 Safety First BERMAD believes that the safety of personnel
More informationWater Facility Maintenance. Using Diving Operations
Water Facility Maintenance Using Diving Operations For years Aquatech Diving Services has been performing potable water facility maintenance projects such as inspections, cleanings, valve repairs, line
More informationStandards of Practice Emergency Shower/Eyewash Installation, Use, Testing & Maintenance
Standards of Practice Emergency Shower/Eyewash Installation, Use, Testing & Maintenance Document Authority: EHS Coordinator Document Custodian: EH&S Coordinator Effective Date: 09.01.15 Issuing Dept: College
More informationFlorida Building Code Review Checklist
Florida Building Code Review Checklist PROJECT IDENTIFICATION: CONTRACTOR: ARCHITECT: STRUCTURAL ENGINEER OF RECORD: CIVIL ENGINEER OF RECORD: PLUMBING ENGINEER OF RECORD: MECHANICAL ENGINEER OF RECORD:
More informationWalking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
More informationFM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate
December 6, 2010 Foam 31a 1. Description With Multiple Pilot Pressure Regulating Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple pilot pressure regulating foam risers can be supplied from
More informationDESIGN DATA OBSOLETE. C. Inspections - It is imperative that the system be inspected and tested on a regular basis. See Inspection
February 9, 1998 Foam 201a 1. DESCRIPTION A Deluge Bladder Tank Foam/Water System is a standard deluge system capable of discharging a foam/water solution automatically through open sprinklers, spray nozzles,
More informationEKC International FZE. Safety Instructions For Handling & Inspection Manual For Refillable Seamless Steel Gas Cylinders
Safety Instructions For Handling & Inspection Manual For Refillable Seamless Steel Gas Cylinders MKT/WI/02 Page 1 of 6 1. Sensitivity of cylinder materials to operating conditions and their solution. Material
More informationAs Supplied : 1.67 lbs/gal (200 g/l) Plasite Thinner #71 : 10% by volume 2.18 lbs/gal (261 g/l)
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Dry Film Thickness Typical Uses Solid(s) Content Coverage Rate VOC Values Dry Temp. Resistance Temperature Resistance (Immersion)
More informationPERFORM Operating Document
PERFORM Operating Document Use and Maintenance of CO 2 Incubator PC-POD-CA-007-v02 Revision History Version Reason for Revision Date 01 New POD 30-Sep-13 02 Minor revisions for section 2.3, 3.1, 4.3. 14-April-16
More informationDISINFECTION OF WATER TREATMENT PLANTS
American Water Works Association ANSI/AWWA C653-97 (Revision of ANSI/AWWA C653-87) R AWWA STANDARD FOR DISINFECTION OF WATER TREATMENT PLANTS Effective date: Aug. 1, 1997. First edition approved by AWWA
More informationRULES PUBLICATION NO. 52/P UNDERWATER INSPECTION OF MOBILE OFFSHORE DRILLING UNITS IN LIEU OF DRYDOCKING
RULES PUBLICATION NO. 52/P UNDERWATER INSPECTION OF MOBILE OFFSHORE DRILLING UNITS IN LIEU OF DRYDOCKING 2001 Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or
More informationNew Recruit Information Package
New Recruit Information Package 2016 S U N P E A K S F I R E R E S C U E Welcome to Sun Peaks Fire Rescue On behalf of all of the members of Sun Peaks Fire Rescue, I would like to thank you for expressing
More information49 CFR 195 Regulatory Overview
49 CFR 195 Regulatory Overview Overview DOT PHMSA OPS Relates to public safety, governs materials, design, construction, operations and maintenance Applies to either transmission, distribution or jurisdictional
More informationPART 1 GENERAL..2 Components of the gas chlorination system include, but are not limited to the following:
PART 1 GENERAL 1.1 DESCRIPTION.1 This section includes the supply, delivery and installation, testing and placement into operation of a gas chlorination system, and appurtenances as specified herein and
More informationAGENDA SAN CLEMENTE GOLF COURSE COMMITTEE THURSDAY, JULY 5, 2018, 6:00PM. City Hall, 100 Avenida Presidio, San Clemente CA Council Chambers
AGENDA SAN CLEMENTE GOLF COURSE COMMITTEE THURSDAY, JULY 5, 2018, 6:00PM City Hall, 100 Avenida Presidio, San Clemente CA Council Chambers **PLEASE NOTE TIME AND LOCATION** FOR ADDRESSING THE COMMITTEE:
More informationFALL PROTECTION (SAF-SPI-06)
1. PURPOSE To describe the Ontario Operations standard methods for preventing serious injury resulting from fall from heights and to provide a Standard for Fall Protection to safeguard employees who work
More informationA. Evaluation of the written program
A. Evaluation of the written program Begin your audit with an evaluation of the written respiratory protection program. In addition to the operating procedures describing respirator selection and use in
More informationSAFEWORK PRACTICES EQUIVALENCY PROCEDURE FOR ACCESSING FLOATING ROOF TANKS ON STORAGE TANKS IN SERVICE CAT A-2 SOP #33
SUNCOR ENERGY PRODUCTS DISTRIBUTION TERMINAL OPERATING MANUAL STANDARD OPERATING PROCEDURE SAFEWORK PRACTICES EQUIVALENCY PROCEDURE FOR ACCESSING FLOATING ROOF TANKS ON STORAGE TANKS IN SERVICE Date Issued:
More informationAccreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs)
RG 3 Edition 4 December 2018 Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 / Edition: 4 Page 1 of 8 Contents 1. Introduction 2 2. Scope - Inspection Services
More informationJacksonville District Master ************************************************************************** USACE / CESAJ
USACE / DEPARTMENT OF THE ARMY 01 35 25 (Apr 2006) U.S. ARMY CORPS OF ENGINEERS JACKSONVILLE DISTRICT LOCAL MASTER GUIDE SPECIFICATION SECTION TABLE OF CONTENTS DIVISION 01 - GENERAL REQUIREMENTS SECTION
More informationM-06 Nitrogen Generator (Nitrogen Making Machine)
Guideline No.M-06 (201510) M-06 Nitrogen Generator (Nitrogen Making Machine) Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains
More informationLaboratory Safety Guideline Emergency Eyewash and Safety Showers
Introduction The purpose of this program is to ensure that all safety eyewashes and showers supply clean, potable water and are in proper working order. This program describes procedures for emergency
More informationAWWA Pipe Flanges. AWWA C Standard Steel Hub Flanges Class D AWWA C Standard Steel Hub Flanges Class E AWWA C Flange Manufacturer
WW Pipe Flanges WW Flanges are commonly used in waterworks, wastewater, slurry, plant piping or other light duty applications generally requiring pressures of less than 300 psi. Pressure ratings for WW
More informationSTATE UNIVERSITY COLLEGE AT ONEONTA SWIMMING POOL PROCEDURES March 2012
STATE UNIVERSITY COLLEGE AT ONEONTA SWIMMING POOL PROCEDURES March 2012 I. BACKGROUND Although the State Sanitary Code does not apply directly to state-owned facilities, SUNY Onoenta facilities are inspected
More informationNOTICE OF PROPOSED CLASSIFICATION ACTIONS BY THE HUMAN RESOURCES DIRECTOR
NOTICE OF PROPOSED CLASSIFICATION ACTIONS BY THE HUMAN RESOURCES DIRECTOR The following actions are being posted in accordance with Civil Service Rule 109. In the absence of a protest addressed to the
More informationAS/NZS :2013. Training and certification of occupational divers AS/NZS :2013. Part 5: Dive supervisor. Australian/New Zealand Standard
AS/NZS 2815.5:2013 Australian/New Zealand Standard Training and certification of occupational divers Part 5: Dive supervisor Superseding AS 2815.5 2006 AS/NZS 2815.5:2013 AS/NZS 2815.5:2013 This Joint
More informationGeneral Job Responsibilities and Duties. Greater Cleveland Aquarium. Reports to: Diving Safety Coordinator
Reports to: Diving Safety Coordinator General Summary of Job Duties The assists in the planning, development, training and implementation of all SCUBA activities for the including but not limited to care
More informationINSTALLATION INSTRUCTIONS FOR SSI WIDEBAND DIFFUSER
INSTALLATION INSTRUCTIONS FOR SSI WIDEBAND DIFFUSER Comment Sheet: 1. Installation, Operation and Maintenance Manual contains detailed information on the SSI-Cap Diffuser unit. This manual covers start-up,
More informationSTANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)
STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply
More information