Understanding Statutory Regulations and Organisational Safety Requirements within a Medical Engineering Environment
|
|
- Marylou Stevens
- 5 years ago
- Views:
Transcription
1 This unit has 5 learning outcomes Learning Outcomes Assessment Criteria The learner will: 1. Know how to comply with statutory regulations and organisational safety requirements relating to Health and Safety in a medical engineering environment. 2. Know how to identify hazards in the workplace and rate the risk to yourself and others. The learner can: 1.1. Describe the roles and responsibilities of themselves and others under the Health and Safety at Work Act, and other current legislation relating to Health and Safety Describe the specific regulations and safe working practices and procedures that apply to their work activities Describe the warning signs for the seven main groups of hazardous substances defined by Classification, Packaging and Labelling of Dangerous Substances Regulations Explain how to locate relevant health and safety information for their tasks, and the sources of expert assistance when help is needed Explain what constitutes a hazard in the workplace.
2 Learning Outcomes Assessment Criteria The learner will: The learner can: 2.2. Describe their responsibilities for identifying and dealing with hazards or near miss events and reducing risks in the workplace Describe the risks associated with their working environment in accordance with Approved Codes of Practice and Safe Systems of Work Describe the processes and procedures that are used to identify and rate the level of risk Describe the protective clothing and equipment that is available for their areas of activity Explain how to safely lift and carry loads, and the manual and mechanical aids available. 3. Understand the procedures to follow in the case of injury or dangerous occurrences Describe the procedures to be followed and the completion of an accident book in the case of accidents involving injury.
3 Learning Outcomes Assessment Criteria The learner will: The learner can: 3.2. Explain why there is a requirement to complete the accident book following an injury Explain what constitutes dangerous occurrences and hazardous malfunctions Explain why dangerous occurrences and hazardous malfunctions must be reported if no one is injured. 4. Understand the action to be taken in an emergency situation or fire. 5. Know how to maintain a safe working environment Describe the evacuation procedures in an emergency situation Describe the common causes of fire and what they can do to help prevent them Describe the organisational policy with regard to fire-fighting procedures Explain how to prepare and maintain safe working areas; the standards and procedures to ensure good housekeeping Describe the importance of safe storage of tools, equipment, materials and products.
4 Learning Outcomes Assessment Criteria The learner will: The learner can: 5.3. Describe the extent of their own authority, and to whom they should report in the event of problems that they cannot resolve.
5 Assessment information All Assessment Criteria must be evidenced. For guidance on assessment, including principles of assessment and methods which may be used, Centres should consult the Open College Network West Midlands publication Assessment Methods and the Assessment section of the Open College Network West Midlands Centre Handbook, both available on our website Sector Subject Area (SSA) 4.1 Date from which unit will be available for learners Assessment guidance 01/05/2016 This unit must be assessed in accordance with Open College Network West Midlands Assessment Methods which can be found in the Open College Network West Midlands Centre Handbook. Leaners must specify all of the following Health and Safety Legislation The Management of Health and Safety at Work Regulations Workplace Health and Safety and Welfare Regulations Personal Protective Equipment at Work Regulations
6 Manual Handling Operations Regulations Provision and Use of Work Equipment Regulations (PUWER) Lifting Operations lifting equipment regulations (LOLER) Display Screen at Work Regulations Reporting of Injuries, Diseases and Dangerous Occurrences Regulations) Safety signs and signals. The Health and Safety (Safety Signs and Signals) Regulations The Control of Noise at Work regulations 2005 Environmental Protection Act 1990 Learners must identify 6 Examples of Hazards in the Workplace from the following moving parts of machinery electricity slippery and uneven surfaces poorly placed equipment dust and fumes, handling and transporting contaminants and irritants material ejection fire working at height
7 environment pressure/stored energy systems volatile flammable or toxic materials unshielded processes working in confined spaces Noise hazards Learners must identify 6 risks associated with their working environment from the following tools materials and equipment that they use spillages of oil chemicals and other substance not reporting accidental breakages of tools or equipment not following laid-down working practices and procedures Electrical Hazard Infection Fire hazard heat sources Hazard Substance Noise Machinery Manual Handling
8 Learners must list 2 of the following Practice and procedures to identify and rate the level of risk safety inspections, the use of hazard checklists, carrying out risk assessments, COSHH assessments) Leaners must include all of the following for evacuation procedures in an emergency situation sounding the emergency alarms escape routes to be used need to report their presence at the appropriate assembly point Learners must include all the following in Appropriate sources of Health and Safety information personal protective equipment (PPE) COSHH regulations Risk assessments Learners must demonstrate all of the following safe working practices and procedures: maintaining a tidy workplace, with exits
9 and gangways free from obstruction using equipment safely and only for the purpose intended observing organisational safety rules, signs and hazard warnings taking measures to protect others from any harm resulting from the work that they are carrying out
SEMBIT SQA Unit Code F9JC 04 Complying with statutory regulations and organisational safety requirements
Complying with statutory regulations and organisational safety Overview This unit covers the competences needed to deal with statutory regulations and organisational safety. It does not deal with specific
More informationSEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements
Complying with Statutory Regulations and Organisational Safety Overview This unit identifies the competences you need to deal with statutory regulations and organisational safety requirements, in accordance
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationQCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Working Safely in an Engineering Environment L/600/5781 SQA Unit code FT2R 60 SSC Ref Unit 78 History of changes Publication date: March
More informationCOGPOLY39 Meet safety, health and environmental requirements in the workplace
Meet safety, health and environmental requirements in the workplace Overview This unit is for those with responsibilities for meeting safety, health and environment requirements in the workplace. It is
More informationUnderstanding health and safety in gas utilisation
Level: 3 Credit value: 11 URN: M/502/8461 Unit aim This unit aims to provide learners with the knowledge and understanding of the general health and safety requirements for working in the gas industry.
More informationCompensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012
Compensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012 What we will cover: The law The duties owed by an employer absolute as far as is
More informationContractor / Exhibitor Handbook
Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors
More informationMobile Training Unit (MTU)
Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees
More informationLevel 3 NVQ in Installation and commissioning (1684) National occupational standards and assessment requirements
Level 3 NVQ in Installation and commissioning (1684) National occupational standards and assessment requirements www.cityandguilds.com June 2004 Publications and enquiries The publications listed below
More informationRelease: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationUnit Title: Health and Safety in a Construction Environment
Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit
More informationLevel 2 NVQ Diploma in Fabrication and Welding ( ) August 2017 Version 1.1
QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Fabrication and Welding (1782-20) August 2017 Version 1.1 Qualification at a glance Subject area City & Guilds number 1782 Age group approved 16+ Entry requirements
More informationCompliance with Health & Safety legislation
Compliance with Health & Safety legislation The following is a brief description of some of the main duties required by the more generic safety legislation applicable to businesses, which the employers
More informationB S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
More informationLevel 2 Diploma in Aerospace and Aviation Engineering (Foundation Competence) ( )
Level 2 Diploma in Aerospace and Aviation Engineering (Foundation Competence) (4605-02) September 2017 Version 3.1 Qualification Handbook Qualification at a glance Subject area Engineering City & Guilds
More informationHealth, Safety and Welfare Policy
Health, Safety and Welfare Policy This Policy is prepared in accordance with section 2(3) the Health and Safety at work etc. Act 1974, with the intention of promoting a safe working environment that will,
More informationNZQA unit standard version 3 Page 1 of 8. Manage the mine ventilation system at an extractive site
Page 1 of 8 Title Manage the mine ventilation system at an extractive site Level 7 Credits 30 Purpose This unit standard covers the development and management of the operation and maintenance of a mine
More informationLevel 2 UCO9. Follow health and safety practice in the salon. Learner name: Learner number: UCO9_v2 F/507/0522
Level 2 UCO9 Follow health and safety practice in the salon Learner name: Learner number: UCO9_v2 F/507/0522 Overview Level 2 3Credits Through this unit you will learn how to follow all health and safety
More informationBefore you begin. Introduction Follow work health and safety procedures 1. Topic 1 What you need to know about WHS 3
Contents Before you begin v Introduction Follow work health and safety procedures 1 Topic 1 What you need to know about WHS 3 1A Emergency and evacuation procedures 4 Activity 1 10 1B Signs and information
More informationCOSAO26 Identify workplace health and safety hazards and control risks in asbestos surveying and analysis
Identify workplace health and safety hazards and control risks in Overview This unit is about identifying hazards and assessing risks. You will also need to verify and implement methods and procedures
More informationCode of Practice and Instructions to Contractors Working for Viridor
Date of issue: 20 Code of Practice and Instructions to Contractors Working for Viridor Prepared by: Ian Powell Head of Safety Management 4.6.3 Revision: 2.0 Contents Introduction... 2 Legal obligations...
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationCompany Policy Health & safety for work performed at Customer premises
Policy Statement Absolute Calibration Limited is concerned for the welfare of all staff employed by the Company and all personnel who may be affected by its actions during the performance of services at
More informationA Checklist for a Health and Safety Risk Assessment
A Checklist for a Health and Safety Risk Assessment Business Information Factsheet BIF376 July 2016 Introduction All employers, and certain self-employed workers and contractors, are required to assess
More informationWorking in Confined & Enclosed Space Policy
Working in Confined & Enclosed Space Policy Author: Alan Bryant Page 1 of 9 Table of Contents: 1. INTRODUCTION... 3 2. DOCUMENT HISTORY... 3 3. REFERENCES... 3 4. PURPOSE... 4 5. SCOPE... 4 6. IMPLEMENTATION...
More informationGeneral Health & Safety (H&S) Refresher Training
General Health & Safety (H&S) Refresher Training November 2007 Annette Nienhaus D5 29.11.06 Contents Objectives of the Health & Safety Management at DESY Legal Background for Providing a Safe Working Environment
More informationGSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS)
GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) Local Exhaust Ventilation Inspection & Maintenance 1 LOCAL EXHAUST AND OTHER VENTILATION Contents 1. Introduction 2. Design specifications
More informationMonitor and maintain health and safety
Monitor and maintain health and safety Note: This section is in two parts Monitor and maintain health, safety and security in the workplace CONTENTS Part 1 Page Number Introduction...2 Health and Safety
More informationRISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD
RISK MANAGEMENT Siobhan Mulvenna, GIOSH, FCIPD www.smt-solutions.com What is Risk Assessment? Like any other area of your business, health and safety needs to be properly managed. To do this you need to
More informationLevel 2 Diploma in Maritime Defence (Foundation Competence) ( )
Level 2 Diploma in Maritime Defence (Foundation Competence) (4615-02) Version 1 (September 2017) Qualification Handbook Qualification at a glance Subject area Mechanical City & Guilds number 4615 Age group
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationBHC-P-07.2 Health Hazards in Construction
BHC-P-07.2 Health Hazards in Construction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision Register Date Version Description
More informationRISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992
RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1
More informationCOMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3)
COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) The following guidance notes accompany the College Procedure Assessment form (COSHH-related). Please complete all applicable
More informationWorkbook. Some exercises for you to complete
Workbook Some exercises for you to complete Workbook Next steps Some Exercises for You to Complete. You will need to discuss with your supervisor and others the issues raised in Safe! You should set an
More informationSEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components
Slinging, lifting and moving materials and components Overview This unit identifies the competencies you need to move loads by slinging and lifting in accordance with approved procedures. You will be required
More informationPOLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT June 2013 Lead Manager John Green, Health & Safety Service Manager Responsible Director Director of Human Resources Approved By Health and
More informationSUMBSE01 - SQA Code HC85 04 Apply health and safety and environmental legislation in the building services engineering sector
Overview This standard is about establishing and maintaining working practices and procedures across a specified range of installation and/or maintenance activities that give consideration to health and
More informationLevel 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) ( )
Level 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) (4608-50) Version 2.0 (April 2018) Qualification Handbook Qualification at a glance Subject area Mechanical City &
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationCIVIL INFRASTRUCTURE HEALTH, SAFETY, AND ENVIRONMENT Describe protection of health, safety and environment in the civil infrastructure industry
1 of 8 level: 3 credit: 7 planned review date: October 2006 sub-field: purpose: Civil Works and Services This unit standard is a component of the selfregulation system for operations in the civil infrastructure.
More informationDesign & Technology Department Health & Safety Policy. Outwood Academy Ripon
Design & Technology Department Health & Safety Policy Outwood Academy Ripon Document control table Document title: Author (name & job title): Version number: DT Health and Safety Policy Katy Bradford,
More informationControl of Substances Hazardous to Health (COSHH) Policy
Control of Substances Hazardous to Health (COSHH) Policy & Procedure Document Type Author Owner (Dept) Control of Substances Hazardous to Health (COSHH) Policy & Procedure Health & Safety Human Resources
More informationSEMEEE36 Checking the compliance of electrical equipment against the specification
Checking the compliance of electrical equipment against the Overview This unit identifies the competences you need to carry out compliance checks on electrical equipment, in accordance with approved procedures.
More informationHealth and Safety Policy
Snowflake School Policy Reviewed September 2018 To be reviewed September 2019 Roy English Health and Safety Policy 1. STATEMENT OF INTENT The Trustees of Snowflake School will take steps to meet their
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationSEMAER2_41 Dismantling and removing aircraft access structures
Overview This unit identifies the competences you need to dismantle and remove aircraft access structures, in accordance with approved procedures. You will be required to dismantle and remove the access
More informationLaboratory Self Inspection Checklist LAB01
Laboratory Self Inspection Checklist LAB01 General Chemical/Biological Laboratories Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides
More informationWorkplace Safety Inspection Sheet
Workplace Safety Inspection Sheet Record all details of a safety inspection carried out at your workplace 1 of 2 Date and Time of Inspection:... Area or workplace inspected:... Name(s) and signature(s)
More informationHealth & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review
More informationIMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY
IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY Approved by the Trustees: November 2016 Health and Safety Policy Introduction The main piece of health and safety legislation is the Health and Safety
More informationHealth & Safety Policy 1
St Stephen in Brannel Parish Council Mrs Linda Ranger - Clerk and RFO E-mail: clerk@ststepheninbrannel-pc.org.uk www.ststepheninbrannel-pc.org.uk Office 2, Brannel Room 22 Fore Street, St Stephen St Austell,
More informationEXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors
Appendix 1 Health & Safety Declaration, Roles and Responsibilities Each exhibitor and Informa appointed contractor must complete the Health and Safety Declaration form provided below to confirm they have
More informationLevel 2 Award in Working in Medium Risk Confined Spaces
Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 4 Assessment 5 Internal quality assurance
More informationin Australian Workplaces
Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify
More informationPOLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT August 2017 Important Note: The Version of this policy found on the HR Connect web page is the only version that is controlled. Any other
More informationSafe Use of Pedestrian Controlled Mowers (2 Units)
Safe Use of Pedestrian Controlled Mowers (2 Units) Introduction This qualification is divided into two units: Unit 1 Operate a Mower Unit 2 Use of Pedestrian Controlled Mower The certificate will be endorsed
More informationLevel 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) ( )
Level 2 Diploma in Aerospace and Aviation Engineering (Military Foundation Competence) (4608-50) Version 2.2 (September 2018) Qualification Handbook Qualification at a glance Subject area Mechanical City
More informationNorth Dorset RFC Health & Safety (H&S) Policy and Instructions
North Dorset RFC Health & Safety (H&S) Policy and Instructions ND RFC H&S Instructions Contents Policy Statement... 3 Section 1 - ORGANISATION AND RESPONSIBILITIES... 5 H&S Nominated Personnel... 5 Responsibilities...
More informationWhen you complete this module you will be able to: Describe procedures needed to enter into, or work safely in confined spaces.
Confined Space Entry Learning Outcome When you complete this module you will be able to: Describe procedures needed to enter into, or work safely in confined spaces. Learning Objectives Here is what you
More informationContractor handbook. Purpose
Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance
More informationTo secure the health and safety of workers and workplaces; to ensure everyone goes home safely at the end of each day. To set minimum standards for the management of particular hazards where alternative
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Entanglement Hired From All Master Hire Stores Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE AND OPERATION OF MOBILE ELEVATED WORK PLATFORMS
NPTC Registered Charity No. 1096429 NATIONAL AGRICULTURAL CENTRE STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7669 6553 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE
More informationCOMPLIANCE GUIDELINES FOR. Departmental Health and Safety Inspections
COMPLIANCE GUIDELINES FOR Departmental Health and Safety Inspections CONTENTS 1 INTRODUCTION...1 2 WHY INSPECTION...1 3 OBJECTIVES AND METHODS...2 3.1 Safety Tours...2 3.2 Safety Inspection...2 3.3 Other
More informationCourses available over the Internet
Courses available over the Internet predominantly related to health and safety within the global energy sector... Welcome to Cresent A better trained and more competent workforce can significantly reduce
More informationQuest Operations 4 Health and Safety Declaration Guidance Notes Issue 10 - October 2016
Quest 2016 - Operations 4 Health and Safety Declaration Issue 10 - October 2016 Outcomes The signatory of the current health and safety policy will confirm that the facility being assessed meets: Health
More informationHealth &Safety. Inspection Checklist. Please photocopy before use
Health &Safety Inspection Checklist Please photocopy before use How to use this checklist Safety reps have extensive legal rights to carry out inspections of the workplace. It is important for GMB Safety
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationUnit 302 Health & Safety in ICT. By Josh Gibson
Unit 302 Health & Safety in ICT By Josh Gibson A hazard is an object/ situation which has the potential to cause harm to you. A risk is a situation which exposes you to danger. The types of Health & Safety
More informationCONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE
CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE 1. INTRODUCTION The University uses substances hazardous to health in many of its operations, and accepts that it has a duty of care to reduce exposure
More informationSite Induction Document & Site Rules
Event Name Venue Site Induction Document & Site Rules The 18 th Annual Meeting of the European Society for Pediatric Dermatology QEII Centre London, Britten (Third Floor) & Westminster Rooms (Fourth Floor)
More informationPRODUCT HEALTH AND SAFETY DATA
OASIS 8205 FLAME RETARDANT EMULSION PRODUCT HEALTH AND SAFETY DATA Date of Issue : 14/03/2016 Page : 1 of 6 1. IDENTIFICATION OF PREPARATION AND OF COMPANY Full name Oasis 8205 Flame Retardant Emulsion
More informationSEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation Overview This NOS identifies the competencies you need to carry out preparation and manoeuvring activities
More informationBogo Operations Pollution Incident Response Management Plan
Bogo Operations Pollution Incident Response Management Plan Rhyolite Hard Rock Aggregate Quarry 134 Paynes Road BOOKHAM NSW 2582 PO Box 426 COWRA NSW 2794 p: 02 6227 7260 p: 02 6345 4253 e: info@bogoquarry.com.au
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationHealth & Safety Contractor rules
Health & Safety Contractor rules Contents 1. Introduction... 1 2. The legal bit explaining our terminology... 1 2.1 Legal requirements... 1 3. Our health and safety requirements... 1 3.1 Access to BT premises...
More informationPOLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH)
POLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) INTRODUCTION & LEGISLATION Using chemicals or other hazardous substances at work can put people s health at risk. The law requires employers
More informationPart 3. Safe Hospitality. Safety, Health & Welfare in Hotels, Restaurants, Catering & Bars. Part 3 - Bars
Part 3 Safe Hospitality Safety, Health & Welfare in Hotels, Restaurants, Catering & Bars SHOULD BE READ IN CONJUNCTION WITH Part 1 - General Contents SHOULD BE READ IN CONJUNCTION WITH Part 1 - General
More informationVENUE RISK ASSESSMENT CHECKLIST
VENUE RISK ASSESSMENT CHECKLIST U3A Name: Location/Postcode: Date: U3A Interest Group Description of Activity: HAZARD Yes No N/A COMMENTS 1 Is the access suitable for the group attending the activity?
More informationHealth and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
More informationEUSCS04 Overseeing work in confined spaces
Overview This unit is about the duties of a safety attendant (top-man/woman) which does not require entries into confined spaces. It is about controlling the pre-entry procedures and entry into and out
More informationSFJFRSFF5 SQA Unit Code (H9FD 04) Protect life and the environment from the effects of hazardous materials
Overview This standard is recommended for firefighters. This standard is about working as a team member to limit damage to the environment from (i.e. any materials that potentially present a hazard to
More informationKIERNAN ELECTRICAL SITE INDUCTION. Site Supervisors: Chris Lettice
KIERNAN ELECTRICAL SITE INDUCTION Site Supervisors: Chris Lettice Safety Officer: Lilianne Magner INDUCTION CONTENTS Introduction to company safety policy Scope of Works Site team members Site Layout Site
More informationSite Induction Document & Site Rules
Site Induction Document & Site Rules Event Name Diabetes Professional Conference 2018 Venue Build & Breakdown Times Prepared By Excel London, Halls S19 S23 Build; Mon 12 th March: 09:00 22:00 (space only
More informationCONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA
RECOMMENDED ADDITIONAL CONTROLS TASK / ACTIVITY/ EQUIPMENT/ FACILITY HAZARDS UNWANTED EVENT MINIMUM CONTROLS REQUIRED RISK NO. LIKELI-HOOD CONSE-QUENCE RISK VALUE Project Risk Assessment Page 1 of 16 All
More informationOFFICE SAFETY ESSENTIALS
OFFICE SAFETY ESSENTIALS Introduction Health and Safety at work is everyone's responsibility. It is important that you have a general understanding of safety and health The employer must ensure that your
More informationWoodlarks Camp Site Trust. Health and Safety Policy & Procedures. Amended Date Signature
Woodlarks Camp Site Trust Health and Safety Policy & Procedures 2017 Page/s Page/s Page/s Page/s Page/s Amended Date Signature 15-Apr-2017 Health and Safety Policy and Procedures_ Final 2017.doc Page 1
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationCorporation for Ohio Appalachian Development Corporation for Ohio Appalachian. Confined Space Awareness
Corporation for Ohio Appalachian Development Confined Space Awareness Kevin McCoy kmccoy@coadinc.org Scott Kashuba scott.kashuba@development.ohio.gov Special Dangers of Confined Spaces Confined Space-
More informationSEMCW2-10 Testing quartz watches
Overview This unit identifies the competences you need to carry out tests on quartz watches and watch movements, in accordance with approved procedures. You will be required to carry out tests on a range
More informationHEALTH AND SAFETY GUIDANCE
HEALTH AND SAFETY GUIDANCE Issue #3 NOVEMBER 2014 This document heavily references the Health and Safety at Motor Sports Events, a guide for employers and organisers document which is Crown Copyright 1999
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationWestern Sydney University Safety Inspection Checklist - Laboratory Environments
Western Sydney University Safety Inspection Checklist - Laboratory Environments Useful Hint: To maximise the benefits that can be gained from a workplace inspection activity read the Western Sydney University
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE OF MOWERS ASSESSMENT SCHEDULE
NPTC Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE OF MOWERS
More informationHAZARDOUS SUBSTANCES / DANGEROUS GOODS
HAZARDOUS SUBSTANCES / DANGEROUS GOODS Golden Brown is committed to continuously improving the management and standards of Occupational health and Safety. This commitment extends to minimising exposure
More information