High Pressure Equipment 1 - Low Pressure Valves, Fittings and Tubing 10,000 and 15,000 psi service

Transcription

1 Solutions de régulation des fluides igh quipment - Low Valves, ittings and Tubing 0,000 and,000 psi service Petrometalic SA 2, rue de l rmitage 8000 VRSAILLS packers@petrometalic.com

2 TABL O CONTNTS eneral Information... 2 Low Valves, ittings & Tubing... Taper Seal - Valves... 8 Taper Seal - ittings... 0 Taper Seal - Line ilters & Check Valves... Taper Seal - Safety eads... 2 Taper Seal - Rupture Discs... Taper Seal - Tubing... Taper Seal - Connection Details... 4 NPT - Valves... NPT - ittings... NPT - Couplings, Bulkheads & Caps... 8 NPT - Line ilters & Check Valves... NPT - Safety eads & Rupture Discs PTROMTALIC Siège social 2 rue de l rmitage 8000 Versailles Cedex Tél : (0) ax : (0) 2 6 PD : M. Philippe Mazurel direction@petrometalic.com PTROMTALIC Cambrai rue de cluses de Selles BP Cambrai cedex Tél : (0) ax : (0) DA : eneviève Leroy daf@petrometalic.com CONTACTS : Mme lisabeth BONNVILL Commercial rance / xport Tél ax packers@petrometalic.com Mr Didier RNUT Responsable Commercial Tél ax packers@petrometalic.com

3 DÉPARTMNT ACTIVITÉS SPÉCIIQUS, TP T INDUSTRI OBTURATURS BIMBAR / PACKRS Petrometalic développe et exporte dans le monde entier depuis le tuyau dilatable BIMBAR, d'abord pour l'abattage hydraulique du charbon, ensuite pour la consolidation des sols et les applications géotechniques. plus d'information sur les obturateurs sur Petrometalic.com Surpresseur de chantier SP400-0 à 40 bar Pompe P Le Touquet - 20 à 200 bar POMPS T SURPRSSURS Surpresseurs nus ou équipés en centrale jusqu'à 000 bars. u Types surpresseurs hydropneumatiques surpresseurs à gaz surpresseurs d'injection ciment ou résine surpresseurs de chantier pompes manuelles u Domaines TP offshore industrie géotechnologie catalogue surpresseurs et pompes téléchargeables sur Petrometalic.com Surpresseur SP200-0 à 20 bar Pompe gros débit S28JC - jusqu'à 80 bar RACCORDS T TUBS TRÈS AUT PRSSION Une gamme P et TP couvrant tous les composants consultables et téléchargeables dans nos catalogues. catalogues TP téléchargeables sur Petrometalic.com SRVIC COMMRCIAL packers@petrometalic.com tel. : (Cambrai) tel. : (Cambrai) NOS NAMNTS un stock de.m 0 ans d'expérience conseil de qualité 2

4 Valve Design eneral Valve bodies through 00,000 psi are high tensile Type 6 stainless steel, 0,000 psi valve bodies are -4 P stainless steel. Stem assemblies have non-rotating tips to prevent galling with valve seats. Packing is located below the stem threads to prevent contact with media (liquid or gas). Packing glands are equipped with locking devices or lock nuts. Six valve patterns (see chart on page.). Tubing connections are: /6",,,, /6",, and ". Pipe connections include:,,,,, and " NPT. Remote control air operators are available for most valves. Positive uide Stem: igh quipment Company's patented Positive uide stem assembly virtually eliminates lower stem rotation one of the most common causes of premature stem failure. The lower section stem is manufactured from hardened -4 P stainless steel for exceptional wear and corrosion resistance and can be easily serviced with no special tooling required. The one-piece upper section stem eliminates the need for continual adjustment and minimizes loose handle backlash. The Positive uide Stem is standard for all A4, A6, 4, 6, and valves, and 60,000 psi 2 valves. Positive uide Stem Rolled Style Stem: This simple two-piece design is also nonrotating and is ideal for smaller valves and for valves made from exotic materials. The standard lower section stem is manufactured from hardened -4 P stainless steel. It is affixed to a one-piece upper stem requiring no periodic adjustment. The two stem components are free to rotate independently of each other, thereby minimizing rotation of the lower stem against the valve seat. The Rolled Style Stem is standard for all A, A2, NA, NB, L4, L6 valves, 0,000 psi 2, X4, and X6 valves, as well as most valves requiring stems made from exotic materials. It is optional for any valve normally supplied with a Positive uide Stem. Pinned Stem Design: This variation on the Rolled Style Stem is a three-piece design in which the lower stem is pinned into a freely-rotating stem guide. It has all of the advantages of the rolled style stem, with the additional benefit of a replaceable lower section stem. The Pinned Stem Design is standard for all NC, ND, N, N, L, L2, L6, and 6 valves. Pinned Stem Rolled Style Stem

5 Quick Selector uide to Standard Valves Taper Seal Valves 0,000 psi Tubing Size O.D. I.D. Two Way Straight 0-A4 0-A6 Two Way Angle 0-2A4 0-2A6 Three Way Two Press 0-A4 0-A6 Three Way One Press 0-4A4 0-4A6 Three Way Two Stem 0-A4 0-A6 Replaceable Seat NA NA Medium Valves,000 psi /6".00" /6" -A -A2 20-L4 20-L6-2A -2A2 20-2L4 20-2L6 -A -A2 20-L4 20-L6-4A -4A2 20-4L4 20-4L6 -A -A2 20-L4 20-L6 NA NA 20-2L4R 20-2L6R 20,000 psi /6" /6" 20-L 20-2L 20-L 20-4L 20-L 20-2LR 20-L2 20-2L2 20-L2 20-4L2 20-L2 20-2L2R igh Valves " /6".040".08" 20-L L L L L L6R 0-22R 0-24R 0,000 psi R /6" /6" R ".4" R.020" R 60,000 psi /6" R 60-26R Ultra igh Valves 00,000 psi 0,000 psi /6" /6" /6" /6" X4 0-X X4 0-2X X4 0-X X4 0-4X6 60- NA NA 60-2R 00-2X4R 0-2X6R 4

6 igh quipment Catalog Numbering System PRSSUR TYP CONNCTION CONNCTION OPTIONS /ACCSSORIS 0 - (I DIRNT ROM IRST CONNCTION) Type of Connection(s) Options Series Components Size and Type 0 =0,000 psi =,000 psi 20 = 20,000 psi 0 = 0,000 psi 40 = 40,000 psi 60 = 60,000 psi 00 = 00,000 psi 0 = 0,000 psi Catalog part numbers for some components (NPT fittings, special alloy parts) have been maintained for historical consideration. The referred pressure series may not reflect the actual pressure rating. Please refer to applicable catalog page for pressure rating, or consult the factory. 2 =land, Collar or Sleeve =Anti-Vibration Assembly =Plug = 2-Way Straight Valve 2 = 2-Way Angle Valve =-Way Valve with Two Connections 4 =-Way Valve with One Connections = -Way, 2-Stem Valve 6 = Ball Valve (loating) 2 = Coupling or Adapter 22 =lbow 2 =Tee 24 =Cross 4 = Check Valve = Line ilter 6 = Safety ead (Straight) 6 =Safety ead (Tee Type) =2-Way Ball Valve * 2 =-Way Ball Valve 80 * =-Way Ball Valve Diverter * 4 =2-Way Ball Valve * =-Way Ball Valve 80 * 6 =-Way Ball Valve Diverter * =-Way Mini Ball Valve /4 NPT 80 =2-Way Ball Valve * 8 =-Way Ball Valve 80 * 82 =-Way Ball Valve Diverter * * (Trunion) ow to Order Valves and ittings emale Simply indicate catalog number and specify option or special requirement. xamples: 0-4 = 0,000 psi Straight Valve for / 4 " O.D. tubing = 60,000 psi Tee for / 4 " O.D. tubing -2A2 =,000 psi Straight Coupling for / 8 " O.D. tubing, Taper Seal connections -2A2NMB =,000 psi Adapter with one end / 8 " O.D. emale Taper Seal and opposite end Male / 4 " NPT Pipe 0-6-T = 0,000 psi Straight Valve for / 8 " O.D. tubing with igh Temperature xtension IPCO 0-2NB (N/C) = 0,000 psi Angle Valve for / 4 " NPT Pipe with ipco Air Operator, Normally Closed IPPO -A4 (N/C) = 0,000 psi Angle Valve for / 4 " Taper Seal with ippo Piston Operator, Normally Closed (astelloy C-26) = 60,000 psi Straight Coupling for / 4 " O.D. tubing, made from astelloy C-26 material A A2 A4 A6 L4 L6 L L2 Male AM AM2 AM4 AM6 LM4 LM6 /6" Taper Seal Taper Seal Taper Seal Taper Seal Medium Medium LM /6" Medium LM2 Medium L6 LM6 " Medium M2 M4 M6 M igh igh igh /6" igh 6 M6 " igh X4 X6 NA NB NC ND N XM4 XM6 NMA NMB NMC NMD NM Ultra igh Ultra igh NPT Pipe NPT Pipe NPT Pipe NPT Pipe NPT Pipe N NM " NPT Pipe A A2 /6" ose ose A6 " ose A2 /6" ose -V = Micro Control Metering Assembly (See page 6.) -T = igh Temperature Stem xtension (Up to,000 ) (See page 6.4) -SS =Sour as ( 2 S) Service -N/O = Normally Open -N/C = Normally Closed -K =With Antivibration Collars and lands -R = Regulating Tip -TSR8 = Ball Valve Actuator -TDA8 = Ball Valve Actuator Double Acting -W/O = Without Collars and lands -LT =Low Temperature Stem xtension (to -20 ) -MPO-NO = Medium Duty Piston Operator Normally Open -MPO-NC = Medium Duty Piston Operator Normally Closed -PO-NO = eavy Duty Piston Operator Normally Open -PO-NC = eavy Duty Piston Operator Normally Closed -PO-NO = xtra eavy Piston Operator Normally Open -PO-NC = xtra eavy Piston Operator Normally Closed

7 Warranty igh quipment Company warrants the products which it manufactures to be free from defects in material and workmanship which would impair their intended usefulness. This warranty is for a period of one year after the date of shipment. Warranty is limited to the repair or replacement of any item manufactured by igh quipment Company. igh quipment Company shall not be liable for any direct or indirect consequential damage arising from a failure or malfunction of the equipment. This warranty further excludes damage, failure or malfunction which is caused by corrosion or erosion common to the material supplied. Terms: Net 0 for qualified accounts OB: rie, PA - USA 6

8 igh quipment Low Valves, ittings and Tubing Taper Seal and NPT 0,000 and,000 psi service igh quipment Company has developed the Taper Seal and NPT lines of products to assure safe and easy plumbing through,000 psi. These needle valves, fittings, line filters, check valves, safety heads, rupture discs and tubing are engineered and manufactured to the highest standards of repeatable quality. The reliable performance of these products has made ip one of the world's leading suppliers of elevated pressure components. Index - Taper Seal Valves...8 ittings...0 Line ilters & Check Valves... Safety eads...2 Rupture Discs... Tubing... Connection Details...4 Index - NPT Valves... ittings... Couplings, Bulkheads & Caps...8 Line ilters & Check Valves... Safety eads & Rupture Discs...20

9 igh quipment Taper Seal Needle Valves 0,000 and,000 psi service Compression type tubing connections for /6",,, and O.D. tubing. Requires no special tooling for tubing preparation (simply cut off, deburr, and insert tubing into connection). Connection details are shown on page 2.A. Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - R to the catalog number. lands and sleeves are supplied with each valve unless otherwise requested (glands and sleeves shown on 2.A). Materials include high tensile type 6 stainless steel for the valve body and hardened -4P stainless steel lower section stem. Packing is Teflon (40 ) standard, with optional Viton (0 ), BUNA-N (200 ) or rafoil (60 ) available at no additional cost. Air operators for remote control operation are available for all valves. (Select required valve and add IPCO. Refer to section.0 for additional data). A ( /6") and A2 ( ),000 psi Valve eatures Non-rotating stem tips Packing below stem threads Type 6 ss high tensile bodies Positive gland lock device No stem adjustment needed Black T-handles or choice of 4 colors Tube sizes /6" through A4 ( ) and A6 ( ) 0,000 psi 8

10 Taper Seal Valves K Two Way Straight Valves Tubing Catalog No. psi Connection Orifice D J K L Thickness D L J /6" O.D. O.D. O.D. O.D. -A -A2 0-A4 0-A6,000,000 0,000 0,000 A A2 A4 A6 0.0 /6" /6" /6" /6" /6" /6" " " D L K J Two Way Angle Valves Tubing Catalog No. psi Connection Orifice D J K L Thickness O.D. O.D. O.D. -2A -2A2 0-2A4 0-2A6,000,000 0,000 0,000 A A2 A4 A6 0.0 /6" 2 /6" /6" 2 /6" /6" /6" /6" 2 /6" 2 /6" /6" /6" " " /6" O.D. K Three Way Valves/Two Connections D L J Tubing Catalog No. psi Connection Orifice D J K L Thickness /6" O.D. O.D. O.D. O.D. -A -A2 0-A4 0-A6,000,000 0,000 0,000 A A2 A4 A /6" /6" /6" /6" 2 /6" /6" /6" /6" 2 /6" 2 /6" /6" /6" " " K Three Way Valves/One Connection D L J Tubing Catalog No. psi Connection Orifice D J K L Thickness /6" O.D. O.D. O.D. O.D. -4A -4A2 0-4A4 0-4A6,000,000 0,000 0,000 A A2 A4 A /6" /6" /6" 2 /6" /6" /6" 2 /6" /6" /6" /6" 2 /6" 2 /6" /6" /6" " " J L D K J Three Way/Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice D J K L Thickness /6" O.D. O.D. O.D. O.D. -A -A2 0-A4 0-A6,000,000 0,000 0,000 A A2 A4 A6 0.0 /6" 4 " " 8 8 /6" /6" 2 /6" /6" 2 /6" /6" 2 2 " "

11 igh quipment lands/sleeves/plugs lbows/tees/crosses A complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. Standard tubing glands and sleeves are furnished unless otherwise specified. Connection Components Tube Catalog No. Size land Tube Catalog No. Size Sleeve Tube Catalog No. Size Plug -2AM /6" -2AM2 0-2AM4 0-2AM6-2A /6" -2A2 0-2A4 0-2A6 -AM /6" -AM2 0-AM4 0-AM6 B A Taper Seal lbows Catalog No. psi Connections A-B Thickness -22A,000 /6" O.D. TUB A /6" /6" -22A2,000 O.D. TUB A2 0-22A4 0,000 O.D. TUB A4 " " " 0-22A6 0,000 O.D. TUB A6 " " " C B A Taper Seal Tees Catalog No. psi Connections A-B-C Thickness -2A,000 /6" O.D. TUB A " /6" -2A2,000 O.D. TUB A2 0-2A4 0,000 O.D. TUB A4 " " " 0-2A6 0,000 O.D. TUB A6 " " " C B D A Taper Seal Crosses Catalog No. psi Connections A-B-C-D Thickness -24A,000 /6" O.D. TUB A " " -24A2,000 O.D. TUB A2 0-24A4 0,000 O.D. TUB A4 " " " 0-24A6 0,000 O.D. TUB A6 " " " 0

12 Line ilters The line filters as shown utilize sintered stainless steel filter discs (A2 & A pc./set, A4 & A6 4 pc./set). Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discs are supplied. (One micron = 0.00 millimeters). Material of bodies and end covers is high tensile 6 stainless steel. Standard tubing glands and sleeves are provided unless otherwise specified. LOW Micron Size ilter ex Available Catalog No. psi Connections Length Size A,000 /6" TAPR SAL -A2,000 TAPR SAL 0-A4 0,000 TAPR SAL 0-A6 0,000 TAPR SAL Ball Check Valves Ball type check valves insure flow in one direction only. Material for bodies, balls, and covers is high tensile 6 stainless steel. Standard tubing glands and sleeves are provided unless otherwise specified. LOW Soft Seat Check Valves Soft seat check valves insure flow in one direction only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard O-ring (soft seat) material for the sealing surface is Buna-N (nitrile) with other materials including Teflon and Viton available on request. Temperature is limited by the choice of O-ring material. Material of all other parts is high tensile 6 stainless steel. Standard glands and sleeves are provided unless otherwise specified. Catalog No. psi Connections Length ex -4A,000 /6" TAPR SAL " -4A2,000 TAPR SAL /6" " 0-4A4 0,000 TAPR SAL " 0-4A6 0,000 TAPR SAL " LOW Catalog No. psi Connections Length ex -4A-T,000 /6" TAPR SAL " -4A2-T,000 TAPR SAL " 0-4A4-T 0,000 TAPR SAL " 0-4A6-T 0,000 TAPR SAL "

13 igh quipment Safety eads A choice of three safety head designs is available: male inlet, female inlet (straight), and tee type. The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections on all sizes are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 60 foot pounds, depending upon pressure and media being used. Material of bodies and hold down nuts is high tensile 6 stainless steel. old down rings are hardened -4P stainless steel. Standard tubing glands and collars (sleeves) are provided unless otherwise specified. Note: Rupture discs are not included and must be ordered as a separate item. NPT Male Inlet Safety eads Inlet ex Catalog No. psi Connection Length Size 0-6AM4 0,000 TAPR SAL 2 " 0-6AM6 0,000 TAPR SAL 2 " NPT A B Tee Type Safety eads Inlet Catalog No. psi Connection A B Thickness -6A,000 /6" TAPR SAL X -6A2,000 TAPR SAL " 0-6A4 0,000 TAPR SAL " 0-6A6 0,000 TAPR SAL " NPT emale Inlet (Straight) Safety eads Inlet ex Catalog No. psi Connection Length Size -6A,000 /6" TAPR SAL " -6A2,000 TAPR SAL " 0-6A4 0,000 TAPR SAL " 0-6A6 0,000 TAPR SAL " 2

14 Rupture Discs /4 " Angled Seat /4 " effective area SPCIAL DISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. Standard rupture discs are available from stock in burst pressures as listed in the chart below. Taper seal pressures are shaded. These discs are 6 stainless steel (except for 000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are then tested and the actual average burst pressure is stamped on an accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure. Standard Burst s (in psi at 2 ),000,00 2,000 2,00,000,00 4,000 4,00,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00,000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 60,000 6,000 igh Tubing Tubing is cold drawn, seamless, and is supplied in the /8 hard condition (not annealed). Tensile strength is approximately 40 percent higher than that of annealed tubing. All tubing is manufactured in strict accordance with igh quipment Company specifications to insure tolerances and bore quality. Tubing is stocked in lengths of 8 to 22 feet but may be ordered in shorter lengths with no additional cutting charge. Note: The /6" and O.D. tubing sizes may be coiled for shipment. Larger sizes must be shipped in straight lengths. Working Type of Catalog Tubing Size psi Connection Used Material Order Number / 6 " /8 " /6" O.D. x 0.006" I.D. -A-006,000 /6" TAPR SAL (A) 6 SS /6" O.D. x 0.00" I.D. -A-00 O.D. x 0.060" I.D.,000 TAPR SAL (A2) 6 SS -A2 / 4 " O.D. x I.D. 0,000 TAPR SAL (A4) 6 SS 0-A SS 0-A4-04 / 8 " O.D. x I.D. 0,000 TAPR SAL (A6) 6 SS 0-A SS 0-A6-04

15 igh quipment Taper Seal Connections 0,000 and,000 psi service Taper Seal connections are available for /6",,, and O.D. tubing. No special tubing preparation is required simply cut tubing to desired length, deburr and assemble. The,, and sizes utilize a two-piece sleeve which is supplied partially assembled. When the connection is assembled, the outer sleeve portion is permanently compressed over the inner portion to rigidly lock the sleeve onto the tubing. Note that the sleeve is not forced to bite into the tubing, but rather is clamped onto the tubing much like a machine collet. ratings. The /6" and O.D. tubing size connections are rated to,000 psi working pressure. The and O.D. sizes are rated to 0,000 psi working pressure. asy make-up connections. One of the popular benefits of taper seal connections is that it is very easy to determine when the connection is tight enough during initial assembly. Simply rotate the tubing gland into the connection until you feel a bottoming out or dead stop of the wrench. This signals that the connection has been properly made. A commercial thread lubricant is highly recommended to facilitate initial makeup of the connection, but such lubrication may be removed afterwards if desired. The Taper Seal connection can be disassembled and then reassembled an indefinite number of times. Standard material for the gland is Type 6 stainless steel. The inner portion of the two-piece sleeve is Type 6 stainless steel. The nonwetted outer sleeve portion is zinc plated alloy steel. (Note that the /6" O.D. size is a one-piece sleeve design) in Type 6 stainless steel. Tubing glands and sleeves are provided with all valves and fittings unless otherwise requested. (See chart at right for size details and catalog numbers). emale Opening Detail land A /6 " O.D. Tubing Sleeve Plug 60ϒ A2 /8 " O.D. Tubing Tubing land Sleeve,000 psi 0,000 psi A4 /4 " O.D. Tubing A A2 A4 A6-2AM -2AM2 0-2AM4 0-2Am6-2A -2A2 0-2A4 0-2A6 0ϒ TD. -28 IN. /6".0.06" /6" X /6" /6" ϒ 4ϒ TD. -20 IN. X /6" /6" /6" TD. -6 IN. -AM -AM2 0-AM4 0-AM6 4ϒ /6" X 2 ϒ /6" 2 " A6 /8 " O.D. Tubing TD. -6 IN. 4ϒ /6" X ϒ /6" " 4

16 emale NPT/0,000 psi Pipe Connection Valves /8 " /4 " /8 " /2 " NPT Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost. Materials include high tensile Type 6 stainless steel for valve bodies, and hardened -4P stainless steel for lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), BUNA-N (200 ) and rafoil (60 ) available at no additional cost. Air operators for remote control operation are available for all valves. (See Air Operator section of catalog). NA ( ), NB ( ) and NC ( ) ND ( ) K Two Way Straight Valves Pipe Size Catalog No.* psi Connection Orifice D J K L Thickness D L J NPT NPT NPT NPT 0-NA 0-NB 0-NC 0-ND 0,000 0,000 0,000 0,000 NA NB NC ND /6" /6" 2 /6" 2 /6" /6" " " " D L K J Two Way Angle Valves Pipe Size Catalog No.* psi Connection Orifice D J K L Thickness NPT NPT NPT NPT 0-2NA 0-2NB 0-2NC 0-2ND 0,000 0,000 0,000 0,000 NA NB NC ND /6" " " " 2 /6" 2 /6" 2 /6" /6" " " " * or valves requiring high temperature rafoil packing in the NPT, or NPT or NPT sizes, add suffix -W to catalog number. (xample 0-NB-W.)

17 igh quipment emale NPT/0,000 and,000 psi Pipe Connection Valves /8 " /4 " /8 " /2 " NPT /4 " NPT " NPT Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost. Materials include high tensile Type 6 stainless steel for valve bodies, and hardened -4P stainless steel for lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), BUNA-N (200 ) and rafoil (60 ) available at no additional cost. Air operators for remote control operation are available for all valves. (See Air Operator section of catalog). NA ( ) and NB ( ) NC ( ) and ND ( ) N ( ) and N (" ) Two Way Straight Valves Pipe Size Catalog No.* psi Connection Orifice D J K L Thickness K NPT -NA,000 NA.20 4 /6" D L J NPT NPT NPT NPT " NPT -NB -NC -ND 0-N 0-N,000,000,000 0,000 0,000 NB NC ND N N /6" /6" /6" /6" /6" " Two Way Angle Valves Pipe Size Catalog No.* psi Connection Orifice D J K L Thickness D L K J NPT NPT NPT NPT NPT " NPT -2NA -2NB -2NC -2ND 0-2N 0-2N,000,000,000,000 0,000 0,000 NA NB NC ND N N /6" 4 /6" /6" 2 /6" 2 /6" 2 /6" 2 2 /6" /6" " * or valves requiring high temperature rafoil packing in the NPT, or NPT or NPT sizes, add suffix -W to catalog number. (xample 0-NB-W.) 6

18 lbows/tees/crosses A complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. NPT lbows Catalog No. psi Connections A-B Thickness B A -22NA,000 NPT NA " " -22NB,000 NPT NB " " " -22NC,000 NPT NC " " " -22ND,000 NPT ND N 0,000 NPT N 2 2 /6" /6" 0-22N 0,000 " NPT N " " 2 /6" 2 /6" NPT Tees C B A Catalog No. psi Connections A-B Thickness -2NA,000 NPT NA -2NB,000 NPT NB " " " -2NC,000 NPT NC " " " -2ND,000 NPT ND 2 2 /6" 0-2N 0,000 NPT N 2 2 /6" 0-2N 0,000 " NPT N 4 " 2 /6" 2 /6" C B D A NPT Crosses Catalog No. psi Connections A-B Thickness -24NA,000 NPT NA -24NB,000 NPT NB " " " -24NC,000 NPT NC " " " -24ND,000 NPT ND 2 2 /6" 0-24N 0,000 NPT N 2 2 /6" 0-24N 0,000 " NPT N /6" 2 /6"

19 igh quipment NPT Straight Couplings Standard material is high tensile 6 stainless steel. A B Catalog No. psi Connections A-B Length ex -2NA,000 NPT NA -2NB,000 NPT NB " -2NC,000 NPT NC " -2ND,000 NPT ND 0-2N 0,000 NPT N 2 0-2N 0,000 " NPT N 2 A NPT Bulkhead Couplings Bulkhead couplings are designed specifically for passing a tubing connection through a panel or steel barricade. These couplings include a locknut as shown. Material is high tensile 6 stainless steel. Locknut B Catalog No. psi Connections A-B Length ex ole Diameter -2NA-B,000 NPT NA 2 " - 4-2NB-B,000 NPT NB 2 " - 4-2NC-B,000 NPT NC 2 /6" - 2-2ND-B,000 NPT ND N-B 0,000 NPT N N-B 0,000 " NPT N 2-2 NPT Caps Tubing end caps are offered for use in sealing off tubing ends either for temporary use or permanent use such as on small volume reservoirs. Standard material is high tensile 6 stainless steel. A Catalog No. psi Connections A-B Length ex -2NA-C,000 NPT NA -2NB-C,000 NPT NB " " -2NC-C,000 NPT NC " -2ND-C,000 NPT ND 0-2N-C 0,000 NPT N 0-2N-C 0,000 " NPT N 8

20 NPT Line ilters The line filters as shown utilize sintered stainless steel filter discs pc./set. Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discs are supplied. (One micron = 0.00 millimeters). Material of body, caps and cover is hightensile 6 stainless steel. LOW Catalog No. psi Connections A-B Length ex Micron Size ilter Available NA,000 NPT NA /6" -NB,000 NPT NB 4 /6" -NC,000 NPT NC 4 /6" -ND,000 NPT ND 4 /6" NPT Ball Check Valves Ball type check valves insure flow in one direction only. Material for body, caps and cover is high tensile 6 stainless steel. LOW Catalog No. psi Connections A-B Length ex -4NA,000 NPT NA 4 " -4NB,000 NPT NB 4 " -4NC,000 NPT NC 4 " -4ND,000 NPT ND 4 /6" 0-4N 0,000 NPT N /6" 0-4N 0,000 " NPT N 2 NPT Softseat Check Valves Soft seat check valves insure flow in one direction only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard O-ring (soft seat) material for the sealing surface is Buna-N (nitrile) with other materials including Teflon and Viton available on request. Temperature is limited by the choice of O-ring material. Material of all other parts is high tensile 6 stainless steel. LOW Catalog No. psi Connections A-B Length ex -4NA-T,000 NPT NA 4 " -4NB-T,000 NPT NB 4 " -4NC-T,000 NPT NC 4 " -4ND-T,000 NPT ND 4 /6" 0-4N-T 0,000 NPT N /6" 0-4N-T 0,000 " NPT N 2

21 igh quipment NPT Safety eads The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 0 foot pounds, depending upon pressure and media being used. Material of body and hold down nut is high tensile 6 stainless steel. Note: Rupture discs are not included and must be ordered as a separate item. Catalog No. psi Connections Length ex -6NMA,000 MNPT " -6NMB,000 MNPT " -6NMC,000 MNPT " -6NMD,000 MNPT " Rupture Discs / 4 " Angled Seat SPCIAL DISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. /4 " effective area Standard rupture discs are available from stock in burst pressures as listed in the chart below. All pressures through,000 psi are shaded. These discs are 6 stainless steel (except for,000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are tested and the actual average burst pressure is stamped on an accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure. Standard Burst s (in psi at 2 ),000,00 2,000 2,00,000,00 4,000 4,00,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00,000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 60,000 6,000 20

22 PTROMTALIC Siège social 2 rue de l'rmitage 8000 VRSAILLS Tel : ax : Petrometalic Cambrai Rue des cluses de Selles BP Cambrai Cedex Tél : ax : negoceversailles@petrometalic.com negocecambrai@petrometalic.com