TEST REPORT N
|
|
- Griffin Bell
- 5 years ago
- Views:
Transcription
1 centro ricerche-sviluppo e laboratori prove Date received: Date of issue: S. Giovanni al at. UD ITERATIOAL FURITURE A/S SAVVAERKSVEJ 2, RAMTE 8586 OERUM DJURS () Report consists of 6 test reports. Defects before testing: one Sample name: IF BORD Overall dimensions: List performed tests: 1. School tables: dimensions E : Tables for educational institutions. Safety requirements E : Tables for educational institutions. Stability E : Tables for educational institutions. Horizontal static load E : Tables for educational institutions. Horizontal fatigue E : Tables for educational institutions. Vertical static load E :2012
2 33048 S. Giovanni al at. UD / 1 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! School tables: dimensions E :2006 School tables: dimensions E /06 annex A clause A.2 Table: Symbols Dimensions Value requested (mm) Value measured (mm) h1 Height of the top 710 ± t1 Minimum depth of top Minimum length of top, per person Minimum horizontal distance between the front legs, per person Legroom: Compiles with the minimum dimensional requirements for size mark 5. Conformity to annex A table A.2 and A.3 of standard E /06:
3 33048 S. Giovanni al at. UD / 2 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! Tables for educational institutions. Safety requirements E :2012 Tables for educational institutions. Safety requirements E :2012 Clause 4 Requirement b) Edges on the handles: minimum 2 mm radius in the direction of the force applied c) All other edges and corners with wich the user may come into contact with during normal use shall be smooth, rounded or chamfered and shall have no burrs d) Accessible moving parts operated by powered mechanism: distance not permitted > 8 mm and < 25 mm e) With the exception of folding tables, there shall be no accessible gaps > 8 mm or < 25 mm created during normal movements and actions o present o present f) Adjustment controls shall not operate inadvertently or accidentally o present g) Open ends: capped or otherwise closed h) Parts shall not be detachable without the use of an appropriate tool i) Parts wich are lubrificated shall be covered in order to avoid staining o present j) Reflection of the working surface shall be a maximum 45 gloss determined in accordance with E m) table shall not overturn when tested in accordance with E 1730:2000 clause 6.7 n) table shall show no structural failure which can affect safety when tested for strength and durability as specified in 6.2 and they shall still fulfil its function See test report /2012 See test report /2012 See test report /2012 Conformity to clause 4 par. b, c, d, e, f, g, h, i, j, m, n of standard E /2012:
4 33048 S. Giovanni al at. UD / 3 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! Tables for educational institutions. Stability E :2012 Tables for educational institutions. Stability E :2012 clause 6.1 Overall dimensions: Stability under vertical load E :2012 clause Test method: E 1730:2000 clause 6.7 Vertical force 600 Table does not overturn Conformity to clause 4 par. m of standard E :2012
5 33048 S. Giovanni al at. UD / 4 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! Tables for educational institutions. Horizontal static load E :2012 Tables for educational institutions. Horizontal static load E :2012 clause Test method: E 1730:2000 clause 6.2 Overall dimensions: Direction of the force umber of ominal force Vertical component Horizontal component longitudinal o defects transversal o defects Conformity to clause 4 par. n of standard E :2012
6 33048 S. Giovanni al at. UD / 5 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! Tables for educational institutions. Horizontal fatigue E :2012 Tables for educational institutions. Horizontal fatigue E :2012 clause Test method: E 1730:2000 clause 6.4 Overall dimensions: Longitudinal direction: Vertical load in the middle kg Horizontal load umber of o defects Transversal direction: Vertical load in the middle kg Horizontal load umber of o defects Conformity to clause 4 par. n of standard E :2012
7 33048 S. Giovanni al at. UD / 6 Date of test: ITERATIOAL FURITURE A/S! SAVVAERKSVEJ 2, RAMTE! Tables for educational institutions. Vertical static load E :2012 Tables for educational institutions. Vertical static load E :2012 clause Test method: E 1730:2000 clause 6.3 Overall dimension: Vertical force umber of o defects o defects Conformity to clause 4 par. n of standard E :2012
Contact person Date Reference Page Michael Lindblad F025843A 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2016-02-03 5F025843A 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationECE/TRANS/WP.29/GRSG/2017/29)
Submitted by the expert from Italy Informal document GRSG-114-07 (114th GRSG, 9 13 April 2018, Agenda item 6(b)) Additional elements to support the Italian proposal to amend Regulation No. 110 (document
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 4210-2 Second edition 2015-09-01 Cycles Safety requirements for bicycles Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles Cycles Exigences
More informationTest Report. Test Report Smart Systems Limited Incorporating Smart Extrusions. Page 1 of 78
Test Report 8365614. Smart Systems Limited Incorporating Smart Extrusions Page 1 of 78 Introduction. This report has been prepared by Adam Pearce and relates to the activity detailed below: Job/Registration
More informationISO INTERNATIONAL STANDARD. Fluid power systems O-rings Part 2: Housing dimensions for general applications
INTERNATIONAL STANDARD ISO 3601-2 First edition 2008-06-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et pneumatiques Joints toriques Partie
More informationLOAD CHARTS RT890E METRIC DIN / ISO / 75%
LOAD CHARTS RT89E METRIC DIN / ISO / 75% 232729 SERIAL NUMBER RT89E - S/N 232729 1 RT89E - S/N 232729 2 TABLE OF CONTENTS GENERAL NOTES...4 WEIGHT REDUCTIONS / LINE PULLS & REEVING INFO / RIGGING CHART
More informationOP CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST
Page 1 of 5 WORK INSTRUCTIONS FOR ENGINEERS NHB Compiled by : LSS Checked by : GSS Approved by : OP-3-31. CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST Page 2 of 5 31.0 CHECKLIST ITEMS *(refer to respective
More informationPart 2: Fluid power systems O-rings. Housing dimensions for general applications
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3601-2 Second edition 2016-07-15 Fluid power systems O-rings Part 2: Housing dimensions for general applications Transmissions hydrauliques et
More informationRULES PUBLICATION NO. 44//P PILOT TRANSFER ARRANGEMENTS July
RULES PUBLICATION NO. 44//P PILOT TRANSFER ARRANGEMENTS 2016 July Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or extend the Rules and are mandatory where applicable.
More informationISO 606 INTERNATIONAL STANDARD. Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
INTERNATIONAL STANDARD ISO 606 Third edition 2004-03-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de transmission de précision à rouleaux
More informationDE8410 FIVB Official Beach Volleyball Net
DE8410 FIVB Official Beach Volleyball Net User s Manual For Safety Use Caution Misuse causes unexpected injury and net damages. Keep the net away from solid and sharp materials. Keep the rope away from
More informationSite-Specific Assessment of Jack-Ups Part 1: Jack-Up Basics & Why We Do Site-Specific Assessments
OIL & GAS Site-Specific Assessment of Jack-Ups Part 1: Jack-Up Basics & Why We Do Site-Specific Assessments Noble Denton marine services Mike White 1 SAFER, SMARTER, GREENER Overview What are we talking
More informationSee the most up to date version of our catalog by visiting our web site:
See the most up to date version of our catalog by visiting our web site: www.lift-all.com Roundslings THE TUFLEX DIFFERENCE Roundslings All Lift-All slings meet or exceed OSHA and ASME B30.9 standards
More informationTaiwan Bicycle Industry Standard
Taiwan Bicycle Industry Standard TBIS 4210-9 First edition 2016.01.01 Cycles Safety requirements for bicycles Part 9: Saddles and seat post test methods Reference number: TBIS 4210-9:2015 (FDTS) Contents
More informationUIAA Standard (UIAA = Union Internationale des Associations d Alpinisme) January Mountaineering and Climbing Equipment. Connectors.
UIAA Standard (UIAA = Union Internationale des Associations d Alpinisme) January 2004 Mountaineering and Climbing Equipment Connectors UIAA 121 Foreword This UIAA Standard is only published in the English
More informationSPECIFICATION FOR INSTALLATION OF RAISED PAVEMENT MARKERS. This specification shall apply to the installation of raised pavement markers.
SPECIFICATION FOR INSTALLATION OF RAISED PAVEMENT MARKERS 1 SCOPE This specification shall apply to the installation of raised pavement markers. 2 DEFINITIONS Type A Marker - Retroreflective raised pavement
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationCrane Rental Heavy Machinery Moving Project Management
2 3 4 5 6 7 8 9 10 Link-Belt TG-2300B lifting crane capabilities - heavy duty boom Boom - tubular: 90" x 90" (2.29 x 2.29 m) with open throat top section, 2" (51 mm) diameter boom pendants. Mast - 43'
More informationPersonal fall protection equipment Anchor devices
BSI Standards Publication Personal fall protection equipment Anchor devices NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH STANDARD National
More informationGuideline No.: L-01(201510) L-01 LIFEJACKETS. Issued date: October 20,2015. China Classification Society
Guideline No.: L-01(201510) L-01 LIFEJACKETS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationRESOLUTION A.1045(27) RECOMMENDATION ON PILOT TRANSFER ARRANGEMENTS
RESOLUTION A.1045(27) RECOMMENDATION ON PILOT TRANSFER ARRANGEMENTS 1 GENERAL Ship designers are encouraged to consider all aspects of pilot transfer arrangements at an early stage in design. Equipment
More informationTechnical Briefing Note
Technical Briefing Note Subject Date Issued Revision Glossary of Terms 14th Nov 2017 Rev 3 The purpose of this Technical Briefing Note is to provide a glossary of terms commonly used in fall injury prevention
More informationP-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints
Guideline No.P-04 (201510) P-04 Stainless Steel Corrugated Hoses and Metal Bellows Expansion Joints Issued date: 20 th October 2015 China Classification Society Foreword This Guideline is a part of CCS
More informationTABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev.
Racquetball Court Specifications TABLE OF CONTENTS International Racquetball Federation officially approved specifications. Copyright 01/13/1983; rev. 1988; 1997, 2013 SECTION ONE: Performance and Specifications
More informationSHIP FORM DEFINITION The Shape of a Ship
SHIP FORM DEFINITION The Shape of a Ship The Traditional Way to Represent the Hull Form A ship's hull is a very complicated three dimensional shape. With few exceptions an equation cannot be written that
More informationBest Materials Durability Portability 15-Minute Set-up Easy Storage
The Best Ever Complete Polo Setup for top international events Best Materials Durability Portability 15-Minute Set-up Easy Storage Anti Wave International Pty Ltd 22 Turley St West Ipswich 4305 Tel 07
More informationTechnical information for O-rings
echnical information for O-rings eal effect An O-ring is a sealing element used to reliably seal against fluids and gases. he seal effect is created during installation by axial or radial compression of
More informationShort-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 606 Fourth edition 2015-08-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de
More informationTu fl e x TM Roundslings
Tu fl e x TM slings 62 Tu fl e x TM slings THE TUFLEX DIFFERENCE All Lift-All slings meet or exceed OSHA and ASME B30.9 standards and regulations What is atuflex sling? A Tuflex roundsling is an endless
More informationMIL-STD-883H METHOD EXTERNAL VISUAL
* EXTERNAL VISUAL 1. PURPOSE. The purpose of this test method is to verify the workmanship of hermetically packaged devices. This test method shall also be utilized to inspect for damage due to handling,
More informationISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées
INTERNATIONAL STANDARD ISO 1977 Second edition 2006-08-15 Conveyor chains, attachments and sprockets Chaînes de manutention, plaques-attaches et roues dentées Reference number ISO 1977:2006(E) ISO 2006
More informationASSEMBLY INSTRUCTIONS S O L O N STANDARD MODULES
ASSEMBLY INSTRUCTIONS S O L O N STANDARD MODULES SOLON Blue 230/07 SOLON Black 230/07 (01, 02) SOLON Blue 220/03 (01, 07) SOLON Black 280/10 SOLON Black 300/10 SOLON P220/6+/07 SOLON M230/6+/07 (01) SOLON
More informationBRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS. AT 053-[T/BT] xx
Reference number: BRAKE WINCH RUP 503-[T/BT] EQUIPMENT FOR LIFTING LOADS DESIGNATED USE The brake winch RUP 503-[...]T series is a load lifting / lowering device. Device is equipped with safety brake for
More informationS0300-A6-MAN-010 CHAPTER 2 STABILITY
CHAPTER 2 STABILITY 2-1 INTRODUCTION This chapter discusses the stability of intact ships and how basic stability calculations are made. Definitions of the state of equilibrium and the quality of stability
More information10 December 2010 GUIDANCE FOR WATERTIGHT DOORS ON PASSENGER SHIPS WHICH MAY BE OPENED DURING NAVIGATION
E 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: +44 (0)20 7735 7611 Fax: +44 (0)20 7587 3210 Ref. T4/3.01 MSC.1/Circ.1380 10 December 2010 GUIDANCE FOR WATERTIGHT DOORS ON PASSENGER SHIPS WHICH MAY BE
More informationTHE TUFLEX DIFFERENCE. All Lift-All slings meet or exceed OSHA and ASME B30.9 standards and regulations. What is a Tuflex Roundsling?
THE TUFLEX DIFFERENCE Roundslings All Lift-All slings meet or exceed OSHA and ASME B30.9 standards and regulations. What is a Roundsling? Conforms to shape of load to grip securely It is an endless synthetic
More informationINSTRUCTIONS FOR USE
Rebar Chain Assembly INSTRUCTIONS FOR USE 7260XX Rebar Chain Assembly Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046
More informationGuide to Documentation and Marking Part 5 Lifting Accessories, Slings
Guide to Documentation and Marking Part 5 Lifting Accessories, Slings Document reference LEEA 059-5 version 1 dated 31.07.14 Introduction. This guide is aimed at manufacturers, distributors and users of
More informationCARES Technical Approval Report TA1-B & C 5059
CARES Technical Approval Report TA1-B & C 5059 Issue 2 DEXTRA Griptec Anchors Assessment of the Griptec Anchors Product and Quality System for Production 5059 Product DEXTRA Griptec Anchors for reinforcing
More informationTECHNICAL MANUAL. COPRA Anchoring Coupler. For Smart Bolted Connections
TECHNICAL MANUAL Anchoring Coupler For Smart Bolted Connections Version: PEIKKO GROUP 03/2017 Anchoring Coupler For bolted connections Multi-purpose anchoring system for all bolted connections Simplifi
More informationSLS States, Coaches and team managers / SLSA Membership Australian Pool Rescue Championships New Age Group Categories Modifications
SLSA Circular No: 81/11-12 To: CC: From: SLS States, Coaches and team managers / SLSA Membership GM Sport SLSA National Sports Operations Manager Date: 19/04/2012 Subject: and Rules 2012 Australian Pool
More informationCHAPTER 1 STANDARD PRACTICES
CHAPTER 1 STANDARD PRACTICES OBJECTIVES 1) Functions and Limitations 2) Standardization of Application 3) Materials 4) Colors 5) Widths and Patterns of Longitudinal Pavement Marking Lines 6) General Principles
More informationSUBPART C - STRUCTURE
SUBPART C - STRUCTURE GENERAL CS 23.301 Loads (a) Strength requirements are specified in terms of limit loads (the maximum loads to be expected in service) and ultimate loads (limit loads multiplied by
More informationINSTRUCTIONS FOR USE
INSTRUCTIONS FOR USE 7100 Series Lanyards Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046 Deer Park, TX 77536 Phone :
More informationE 212 E 222 Tank top mounting Connection up to G1¼ Nominal flow rate up to 220 l/min
Return Filters E E Tank top mounting Connection up to G¼ ominal flow rate up to l/min Description pplication In the return line circuits of hydraulic systems. Performance features Protection against wear:
More informationSPECIFICATION FOR RAISED PAVEMENT MARKERS
SPECIFICATION FOR RAISED PAVEMENT MARKERS 1. SCOPE This specification covers performance requirements of retroreflective and nonretroreflective raised pavement markers which are bonded directly to the
More informationAppointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet.
Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet. Planning and regulatory requirements (Regulatory requirements) The role or duties
More informationMEASURING INSTRUCTIONS Step-by-Step. Lazy-L Pools. Step #1: Measure the Width (A) and the Length (B)
l i ner MEASURING INSTRUCTIONS Step-by-Step Lazy-L Pools Step #1: Measure the Width (A) and the Length (B) Figure 1 Referring to the illustration of your Lazy-L pool (Figure 1), be sure that the width
More informationA&S. More than just a chain.
A&S. More than just a chain. www.renold.com 2 I More than just a chain Renold A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation
More informationWOMEN S SECTOR. Rule 25 Manufacturers Specifications Changes highlighted in Gray/Bold
WOMEN S SECTOR Rule 25 Manufacturers Specifications 2013 Changes highlighted in Gray/Bold WR-Ma n ufac turer sspecific atio n s_ 201 208 A. All Field Crosses The primary intent of the field crosse specifications
More informationATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
More informationU S F O S B u o y a n c y And Hydrodynamic M a s s
1 U S F O S B u o y a n c y And Hydrodynamic M a s s 2 CONTENTS: 1 INTRODUCTION... 3 2 ACCURACY LEVELS... 3 2.1 LEVEL-0... 3 2.2 LEVEL-1... 3 2.3 PANEL MODEL... 3 3 EX 1. SINGLE PIPE. NON FLOODED... 4
More informationUnofficial translation into English of the Sections of Swiss Standard SIA 262/1:2013 referring to in Situ Air-Permeability Tests
Permea-T RR TM Unofficial translation into English of the Sections of Swiss Standard SIA 262/1:2013 referring to in Situ Air-Permeability Tests Foreword In the following, an unofficial translation of the
More informationRULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS
RULES PUBLICATION NO. 86/P EXPLANATORY NOTES TO SOLAS CONVENTION AND DIRECTIVE 2003/25/EC STABILITY AND SUBDIVISION REQUIREMENTS 2011 Publications P (Additional Rule Requirements) issued by Polski Rejestr
More informationChapter 2 Hydrostatics and Control
Chapter 2 Hydrostatics and Control Abstract A submarine must conform to Archimedes Principle, which states that a body immersed in a fluid has an upward force on it (buoyancy) equal to the weight of the
More informationNew NOVUS PUSH-CHAIR USE AND MAINTENANCE HANDBOOK
New NOVUS PUSH-CHAIR USE AND MAINTENANCE HANDBOOK INDEX INDEX...2 WARNINGS...3 LABELS AND PLATES...4 SOME EXAMPLES OF WHAT SHOULDN T BE DONE WHILE USING NewNOVUS..5 HOW TO INCLINE THE PUSH-CHAIR AND GO
More informationST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N SOL 051 Rev.1 SOLAS 74 CHAPTER V, REG.23 REQUIREMENTS FOR PILOT TRANSFER ARRANGEMENTS TO: SHIPOWNERS, SHIPS OPERATORS & MANAGERS, FLAG
More informationBELAY LANYARD. Climbing and Mountaineering Equipment. Foreword
BELAY LANYARD Climbing and Mountaineering Equipment UIAA 109 Foreword This UIAA Standard is only published in the English language version, which is the master text. For any validations in translation,
More informationΠΑΡΑΡΤΗΜΑΤΑ ΤΟΥ ΑΡ. ΠΡΩΤ: /03/13/ ΕΓΓΡΑΦΟΥ ΥΝΑ/ΚΕΕΠ/ΔΜΚ/ΕΝΕΣΠΥ
ΠΑΡΑΡΤΗΜΑΤΑ ΤΟΥ ΑΡ. ΠΡΩΤ: 4339.20/03/13/22-02-2013 ΕΓΓΡΑΦΟΥ ΥΝΑ/ΚΕΕΠ/ΔΜΚ/ΕΝΕΣΠΥ Α) Απόφαση του ΙΜΟ, A27/RES. 1045/20-12-2011 Pilot transfer arrangements. Β) Εγκύκλιος του ΙΜΟ, MSC.1/Circ. 1428/28-05-2012
More informationSETTING THE HANDLE HEIGHT ON THE ROLLATOR
Model No: Maximum User Weight: 10910C (Lightweight) 10928C (Heavy duty) 125kg (20st) (Lightweight) 170kg (27st) (Heavy duty) Height of handles: 780-915mm (30.5-36 ) (Lightweight) 790-930mm (31-36.5 ) (Heavy
More informationINTERNATIONAL STANDARD
INTERNTIONL STNR IEC 60601-2-38 1996 MENMENT 1 1999-12 mendment 1 Medical electrical equipment Part 2-38: Particular requirements for the safety of electrically operated hospital beds mendement 1 ppareils
More informationLIFTING PIN VDI3366. Item code: B Use and maintenance manual complete of EC conformity declaration. San Maurizio C.
Via Quarantelli 8-10077 - San Maurizio C.se - Italy T +39 011 996 46 11 - F +39 011 996 46 46 C.F./P.IVA 07677130010 info@omcr.it - www.omcr.it Use and maintenance manual complete of EC conformity declaration.
More informationLOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER
LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES... 4 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE. 5 LIFTING AREA
More informationBack. Green Clover Club. Bottom. Wicomico County
DIVISION T - 4-H/FFA PROMOTION Superintendent: Amy Rhodes Phone: 410-749-6141 Email: arhodes1@umd.edu Division Rules & Regulations: 1. 4-H and FFA club/chapters may exhibit in Sections I & II of this division.
More informationJAR-23 Normal, Utility, Aerobatic, and Commuter Category Aeroplanes \ Issued 11 March 1994 \ Section 1- Requirements \ Subpart C - Structure \ General
JAR 23.301 Loads \ JAR 23.301 Loads (a) Strength requirements are specified in terms of limit loads (the maximum loads to be expected in service) and ultimate loads (limit loads multiplied by prescribed
More informationRULES FOR CLASSIFICATION Ships. Part 3 Hull Chapter 5 Hull girder strength. Edition October 2015 DNV GL AS
RULES FOR CLASSIFICATION Ships Edition October 2015 Part 3 Hull Chapter 5 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that
More informationEast Building, PHH-30 U.S. Department New Jersey Avenue S.E. of Transportation Washington, D.C DOT-SP (NINTH REVISION)
East Building, PHH-30 U.S. Department 1200 New Jersey Avenue S.E. of Transportation Washington, D.C. 20590 Pipeline and Hazardous Materials Safety Administration DOT-SP 14576 (NINTH REVISION) EXPIRATION
More informationTransfusion equipment for medical use. Part 4: Transfusion sets for single use, gravity feed
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1135-4 Sixth edition 2015-12-01 Transfusion equipment for medical use Part 4: Transfusion sets for single use, gravity feed Matériel de transfusion
More informationCorrugated Hose Loop Calculations
Corrugated Hose Loop Calculations The loop installation is one of the most common application for metal hoses. It allows the flexible hose assembly to work properly. Care must always be exercised to ensure
More informationLINE FOLLOWING ENHANCED RULES. Allar Aasjõe
LINE FOLLOWING ENHANCED RULES Allar Aasjõe +372 5346 7363 allar.aasjoe@robotex.ee Content 1 Introduction... 3 2 The field... 3 3 The Robot... 3 4 The Competition... 4 5 Obstacles... 4 5.1 Line break...
More informationGROVE MODEL RT58D - 20 TON CAPACITY
LIFTING CHARTS - Rough Terrain Cranes GROVE MODEL - 20 TON CAPACITY WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES 23 JIB with 28-70 BOOM * Stowed - 381 lbs. * Erected - 1,950 lbs. 23-38 TELE. JIB with 28-70
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12217-3 First edition 2002-05-01 AMENDMENT 1 2009-06-15 Small craft Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m AMENDMENT
More informationIntroduction INDEX. INTRODUCTION HSE
Introduction INDEX SECTION PAGE INTRODUCTION ORDERING CODE GLOSSARY MOTOR OPTION TECHNICAL SE SE3 / SE5 SE7 / S7 SE9 / S9 SE12 / S12 SE14 / S14 SE14-2 / S14-2 SE17 / S17 SE17-2 / S17-2 SE21 / S21 SE21-2
More informationCutting and shaping materials using thermal cutting equipment
Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
More informationfeatures and benefits:
Hopup A variety of sizes, kits and options of Hopup displays are available. Hopup tension fabric displays are simple, versatile and can be set up in seconds. Hopups feature a lightweight, durable frame
More informationUSER MANUAL. All rights reserved
USER MANUAL All rights reserved Dear User, Congratulations on purchasing your PARKIS! PARKIS is a household equipment for vertical bicycle parking which lets you free up precious storage space on the floor
More informationTYPICAL S/W TOWER STATIC STABILISER IMPORTANT NOTES
IMPORTANT NOTES Towers should only be erected by competent trained personnel and records of both erection and regular inspection every seven days maintained. At working platform levels fit a standard and
More informationThe Belt System Simple Development great Impact 2015 IPLOCA Health & Safety Award Summary (Presentation)
The Belt System Simple Development great Impact 2015 IPLOCA Health & Safety Award Summary (Presentation) HSE-Q Department May 15th 2015 MAX STREICHER S.p.A. Via Giovanni Keplero 5A I-43122 Parma The Case:
More informationSafety barriers surrounding a swimming pool area at 60A Goldflats Lane, Coatesville, Rodney
Determination 2010/014 Safety barriers surrounding a swimming pool area at 60A Goldflats Lane, Coatesville, Rodney 1. The matter to be determined 1.1 This is a Determination under Part 3 Subpart 1 of the
More informationNAVIGATION AND SEAMANSHIP Control stress, draught and stability of the ship
1 of 5 level: 5 credit: 32 planned review date: June 1998 sub-field: purpose: entry information: accreditation option: moderation option: special notes: Maritime People credited with this unit standard
More informationOPERATION AND INSTRUCTION MANUAL Flat Roof Anchor Model: FRA250L-10X-CTS
OPERATION AND INSTRUCTION MANUAL Flat Roof Anchor Model: FRA250L-10X-CTS (Patent Pending) WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT
More informationSample Procurement Specifications for Aluminum Traffic Control Signs and Components
Sample Procurement Specifications for Aluminum Traffic Control Signs and Components These sample procurement Specifications were prepared by the American Traffic Safety Services Association (ATSSA) Sign
More informationUSER GUIDE ROLLING WALKERS INSTRUCTIONS FOR USE JANUARY, Maximum User Weight: 170kg (Do not exceed this weight)
USER GUIDE ROLLING WALKERS INSTRUCTIONS FOR USE JANUARY, 2013 Model Nos: BE07889T Maximum User Weight: 170kg (Do not exceed this weight) Model Nos: BE07890TB Maximum User Weight: 227kg (Do not exceed this
More informationInstallatIon and owner s InstrUCtIons
InstallatIon and owner s InstrUCtIons Wall Mount Series Adjustable and Fixed Height Goal Systems table of Contents Safety Instructions... 2 Goal Specifications... 3 Frame Attachment... 4 Frame Assembly
More informationFatigue Resistant Sockets for Dynamic Loads PFEIFER Cable Structures. Cable structures technology Info Nr PFEIFER SEIL- UND HEBETECHNIK GMBH
Fatigue Resistant Sockets for Dynamic Loads Cable Structures Cable structures technology Info Nr. 3 4-2012 SEIL- UND HEBETECHNIK GMBH DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31-937-393
More informationMTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling
Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000
More informationGO BEYOND! If you have had enough of bulky, inefficient equipment, try the Helio C2 HD!
GO BEYOND! Why limit yourself with heavy equipment when you don t have to? At Motion Composites, we have taken the heavy out of heavy duty! The Ultralight C2 HD has an increased weight capacity of 350
More informationWorkFit Dual Monitor Kit for WorkFit-T, TL, TLE, TX, and Corner Desk Converters
User's Guide WorkFit Dual Monitor Kit for WorkFit-T, TL, TLE, TX, and Corner Desk Converters 1 A B C D E M6 x 6mm 2 M4 x 5mm 3 M4 x 8mm M6 x 25mm 4 M6 x 20mm 1 For the latest User Installation Guide please
More informationBaying and lifting. Whitepaper
Baying and lifting Whitepaper Table of contents Introduction... 4 Enclosures baying... 6 Floor standing enclosures... 8 Side to side baying... 8 Internal baying brackets CCI06... 8 External baying brackets
More informationMarker Board Lam Technical Information
Product Description Composition The is manufactured with special decorative papers saturated with melamine resin modified with special additives to add the erasing properties to the laminate -, also Kraft
More informationReinforced Soil Retaining Walls-Design and Construction
Lecture 32 Reinforced Soil Retaining Walls-Design and Construction Prof. G L Sivakumar Babu Department of Civil Engineering Indian Institute of Science Bangalore 560012 Example calculation An 8 m high
More informationISO INTERNATIONAL STANDARD. Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs
INTERNATIONAL STANDARD ISO 11334-4 First edition 1999-02-01 Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs Aides à la marche manipulées
More informationExamination lamps OBSERVA ALFALED A06 L88 ALFA
Examination lamps OBSERVA ALFALED A06 L88 ALFA Light plays a major role in the medical field, being required to provide a faithful image of what the doctor sees during observation. 2 Light plays a major
More informationInstallation Instructions for the AlphaDeck Staging System
Installation Instructions for the AlphaDeck Staging System Step 1 - Preparation A. Before setting up this system, determine the location of the stages and all the parts you will need. B. Read through the
More informationOriginal Operation Manual
Special webbing sling (looped webbing sling) 18 mm wide, webbing color black, single-layer, load bearing capacity (WLL 60 kg), with red PVC edge protection One set consisting of two special webbing slings
More informationModule 8 Coils and Threads
Inventor Self-paced ecourse Autodesk Inventor Module 8 Coils and Threads Advanced Learning Outcomes When you have completed this module, you will be able to: 1 Describe a coil and a thread. 2 Apply the
More informationO K D I A MEASUREMENT FORM INTERNATIONAL OK DINGHY CLASS
O K D I A 2010 MEASUREMENT FORM INTERNATIONAL OK DINGHY CLASS NOTES GENERAL 1. The builder shall pay the current building fee to the National OK Dinghy Association which shall issue a building fee receipt
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5775-2 Third edition 2015-12-01 Corrected version 2016-12-01 Bicycle tyres and rims Part 2: Rims Pneumatiques et jantes pour cycles Partie 2: Jantes Reference number ISO 5775-2:2015(E)
More informationITF Coaches Education Programme Biomechanics of the forehand stroke
ITF Coaches Education Programme Biomechanics of the forehand stroke Original article: Bahamonde, R. (2001). ITF CSSR, 24, 6-8 Introduction The tennis forehand stroke has changed drastically over the last
More informationUser Manual for Drum Winch SWI-TEC S-Klasse
User Manual for Drum Winch SWI-TEC S-Klasse Last revised: January 08, 2015 Issued by: Marco Bachmann, Managing Director, Neveta Nautica S.L. Table of Contents Approved Use 3 1. Description of the SWI-TEC
More information