REQUIREMENTS FOR THE INSTALLATION OF GAS UTILIZATION EQUIPMENT THAT MIXES PRESSURIZED OXYGEN WITH NATURAL GAS
|
|
|
- Gertrude Tucker
- 5 years ago
- Views:
Transcription
1 LAST REVIEW DATE: REVIEW CYCLE: 3/26/12 5 Years SPECIFICATION: G TITLE: VOLUME: REQUIREMENTS FOR THE INSTALLATION OF GAS UTILIZATION EQUIPMENT THAT MIXES PRESSURIZED OXYGEN WITH NATURAL GAS 4 and Gas Blue Book REGISTRATION NO.: GAS0403 TARGET TRAINING: GROUPS Gas Distribution Services, Energy Services REVISIONS: (See ) 1) Section Deleted New York City Building Code. Revised NYC Fire Dept requirements to specify the NYC Fire Code Section FC
2 Gas Operations Standards TITLE: REQUIREMENTS FOR THE INSTALLATION OF GAS UTILIZATION EQUIPMENT THAT MIXES PRESSURIZED OXYGEN WITH NATURAL GAS G TABLE OF CONTENTS SECTION TITLE PAGE 1.0 SCOPE LEGAL REQUIREMENTS ORGANIZATIONS APPLICABLE RESPONSIBILITIES CUSTOMER S NATURAL GAS/OXYGEN EQUIPMENT ATTACHMENTS 4 ENVIRONMENTAL REVIEW BY: S. Marotta SAFETY REVIEW BY: S. Marotta PREPARED BY: APPROVED BY: DATE: VOLUME: 4 PAGE 1 OF Tomas Hernandez Acting Chief Gas Engineer Application and Design; 4
3 TITLE: GUIDELINES FOR PREPARING, REVIEWING, REVISING AND ISSUING GAS SPECIFICATIONS AND DRAWINGS. S. Yapchanyk Gas Distribution Engineering 3/26/12 Gas Blue Book PAGES 1.0 SCOPE This specification covers the requirements for the installation of gas utilization equipment that mixes pressurized oxygen with natural gas. This mixing equipment is typically torches used in jewelry manufacturing. This specification applies to all new installations and those existing installations where there have been gas piping changes requiring local municipal inspection and/or approval. 2.0 LEGAL REQUIREMENTS NYC Fire Code, Section FC 2609 "Piping Manifolds and Hose Systems for Fuel Gases and Oxygen" Occupational Safety and Health Administration Requirements Local Municipal Codes 3.0 ORGANIZATIONS APPLICABLE Bronx, Queens, Manhattan and Westchester Gas Distribution Services; and Energy Services. 4.0 RESPONSIBILITIES 4.1 The customer shall notify the Company when they plan to install gas utilization equipment that mixes pressurized oxygen with natural gas. 4.2 Energy Services shall be responsible for informing customers of the required equipment as detailed in Section 5.0. The required equipment must be provided and installed by the customer. 4.3 Energy Services shall be responsible for ensuring that the required equipment detailed in Section 5.0 is in place and that a certificate (i.e. Blue Card) has been received from the authority having jurisdiction prior to issuing a turn-on request to Gas Distribution Services. 4.4 Gas Distribution Services shall be responsible for performing an integrity test on gas piping and gassing in all equipment with the assistance of the customer s plumber or mechanical contractor. 4.5 No gas service shall be supplied to a customer who has not made the necessary installations of equipment detailed in Section 5.0. NUMBER: DATE: VOLUME: 4 and Gas Blue Book G /6/07 Application and Design PAGE OF 8 PAGES 2
4 TITLE: REQUIREMENTS FOR THE INSTALLATION OF GAS UTILIZATION EQUIPMENT THAT MIXES PRESURIZED OXYGEN WITH NATURAL GAS 5.0 CUSTOMER S NATURAL GAS/OXYGEN EQUIPMENT Reference attached schematic drawing for typical installations of natural gas torch boosters and associated equipment. 5.1 A Check-All check valve shall be installed downstream of the gas meter. There should be at least 10 pipe diameters of straight pipe upstream of the check valve. Table XVIII of Con Edison s Requirements for Gas Service Installations (Gas Blue Book) lists acceptable Check- All check valves. 5.2 Approved flashback arrestors shall be installed upstream of the torch(es) on both the natural gas and oxygen supply lines. The flashback arresters may be installed either on the header pipe that supplies multiple torches or on each individual torch. Table XVIII of Con Edison s Requirements for Gas Service Installations (Gas Blue Book) lists acceptable gas and oxygen models for both situations. 5.3 A natural gas torch booster approved by the NYC Fire Department and NYC Department of Buildings (or local municipal codes for Westchester locations) shall be installed as per manufacturer s guidelines. NOTE: In this situation, the natural gas torch booster is considered to be an appliance as opposed to the larger natural gas boosters covered in specification G An accessible appliance control valve shall be installed upstream of the natural gas booster. 5.5 Oxygen shall be supplied as required by the NYC Fire Department and NYC Department of Buildings (or local municipal codes for Westchester locations). This supply is typically from an oxygen generator. 5.6 When a natural gas torch booster supplies multiple torches, the authority having jurisdiction may require hard piping from the gas torch booster to each work bench. When multiple torches are supplied, an appliance control valve shall be installed upstream of each individual torch (this is in addition to the appliance control valve specified in 5.4). NUMBER: DATE: VOLUME: 4 PAGE 2 G /26/12 Application and Design; Gas Blue Book OF 4 PAGES
5 TITLE: REQUIREMENTS FOR THE INSTALLATION OF GAS UTILIZATION EQUIPMENT THAT MIXES PRESURIZED OXYGEN WITH NATURAL GAS 6.0 ATTACHMENTS Appendix A - Photograph of a Typical Natural Gas Torch Booster Typical Installation of Natural Gas Torch Booster and Associated Equipment NUMBER: DATE: VOLUME: 4 PAGE 3 G /26/12 Application and Design; Gas Blue Book OF 4 PAGES
6 Appendix A: Photograph of a Typical Natural Gas Torch Booster Regulator (supplied with torch booster Flashback Arrestor for Natural Gas G
7
G REQUIREMENTS FOR THE INSTALLATION OF GAS BOOSTERS, MICROTURBINES AND ASSOCIATED SYSTEM PROTECTIVE DEVICES
LAST REVIEW DATE: REVIEW CYCLE: 6/22/11 5 Years SPECIFICATION: TITLE: VOLUME: G-2040-9 REQUIREMENTS FOR THE INSTALLATION OF GAS BOOSTERS, MICROTURBINES AND ASSOCIATED 4 and Gas Blue Book REVISIONS: (See
G REQUIRMENTS FOR BRANCH LINES SUPPLYING MULTIPLE REGULATORS AND / OR METERS. 3 and Gas Blue Book
LAST REVIEW DATE: REVIEW CYCLE: 12/4/12 5 Years SPECIFICATION: G-703-0 TITLE: REQUIRMENTS FOR BRANCH LINES VOLUME: 3 and Gas Blue Book REVISIONS: (See ) This specification is being issued for the first
G SPECIFICATION: TITLE: VOLUME: 4 REVISIONS:
SPECIFICATION: G-2040-7 TITLE: REQUIREMENTS FOR THE INSTALLATION OF GAS BOOSTERS AND BACK PRESSURE/SUCTION PROTECTIVE DEVICES IN VOLUME: 4 REVISIONS: Totally re-written. G-2040-7 Gas Operations Standards
A guide to Part 10 of the
OCCUPATIONAL HEALTH AND SAFETY DIVISION Welding, Cutting, Burning and Soldering A guide to Part 10 of the Occupational Safety General Regulations October 2007 A GUIDE TO PART 10 WELDING, CUTTING, BURNING
INSPECTION of PORTABLE and OXY FUEL GAS SYSTEMS
1.0 PURPOSE This work Instruction describes the procedure for the inspection, testing and identification requirements of portable and mobile oxy-fuel gas systems for welding, cutting, heating to ensure
How Flashback Arrestors Work
What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors
Compressed Gasses Safety
COMPRESSED GASES SAFETY Last Modified: APR 2015 1 of 6 Compressed Gasses Safety 1 PURPOSE To provide guidelines for transport, storage, handling, and use of cylinders containing compressed gas. 2 SCOPE
GAS SAFETY Information Bulletin
GAS SAFETY Information Bulletin June 2016 G-03-11-ABSA [Rev2] Page 1 of 7 Fuel Gas Pressure Piping in Plants This bulletin has been jointly developed by Safety Services, the Pressure Equipment Sub- Council,
Title: Pressure Relieving and Venting Devices Function: Ecology & Safety No.: BC Page: 1 of 7 Reviewed: 6/30/12 Effective: 7/1/12 (Rev.
Preparer: Team Member, North America, Process Safety Center of Expertise No.: BC032.020 Page: 1 of 7 Owner: Manager, North America Process Safety Center of Expertise Approver: Sr. Vice President, Ecology
HOT WORK SAFETY 29 CFR WELDING & CUTTING SAFETY (HOT WORK)
Title: Hot Work/Welding Effective Date: 2/6/2013 Control Number: THG_0011 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015 CONTENTS HOT WORK SAFETY 29 CFR 1910.252 WELDING & CUTTING
NJ Plumbing Inspectors Association
NJ Plumbing Inspectors Association Gas Utilization Equipment Hazards & Technical Issues Paul Pirro Manager - Technical Services PSE&G Asset Strategy Ross Romano Technical Support Specialist PSE&G Asset
Specification & scope of work for Multi Component Gas Separation test Rig
XUR Specification & scope of work for ulti Component Gas Separation test Rig 1. Design, supply, assembly and commissioning of the ulti-component gas separation Test rig as per the schematic layout given
FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate
December 6, 2010 Foam 21a 1. Description With Multiple Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple deluge foam risers can be supplied from a single foam concentrate source. Where a bladder
Wilkins Safety Group
Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes
INTER PLANT STANDARD STEEL INDUSTRY SAFETY PROCEDURE FOR GAS CUTTING BY REGULAR/CONTRACTOR S WORKERS. Corresponding IS 818:1968
INTER PLANT STANDARD STEEL INDUSTRY IPSS SAFETY PROCEDURE FOR GAS CUTTING BY REGULAR/CONTRACTOR S WORKERS Corresponding IS 818:1968 IPSS:1-11-017-12 0. FOREWORD 0.1 This Inter Plant Standard, formulated
San Antonio Water System Standard Specifications for Construction ITEM NO. 841 HYDROSTATIC TESTING OPERATIONS
ITEM NO. 841 HYDROSTATIC TESTING OPERATIONS 841.1 DESCRIPTION: This item shall consist of hydrostatic testing operations, of water mains in accordance with these specifications. 841.2 MATERIALS: The materials
Visit our Web site: http: //
CONTENTS: Medium Duty Victor Style Welding And Cutting Outfit MANUFACTURED BY AN ISO 9001 REGISTERED FIRM Visit our Web site: http: // www.northerntool.com TABLE OF CONTENTS Page INTRODUCTION... 1 SECTION
OBSOLETE. Wet pipe low flow manifold system
June 1, 2008 Foam 15a 1. Description Multiple risers can be supplied from a single proportioning device. A riser manifold is installed with various riser types and sizes that are to supply foam solution
HEALTH AND SAFETY PROGRAM 201 HOT TAP PERMIT/FILLET WELD REPAIRS
Page 1 of 15 1.0 PURPOSE 1.1. Axiall, Plaquemine Complex, has developed this Hot Tap Permit Program to eliminate potential accidents, injuries, and to enhance employee protection. 1.2. To provide for the
CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS. October 2007
CALIFORNIA STATE UNIVERSITY, LOS ANGELES WELDING, CUTTING, AND HOT WORK OPERATIONS October 2007 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date TABLE OF CONTENTS TITLE SECTION PURPOSE
Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848
Cal/OSHA Gas Systems for Welding GAS WELDING Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 When performing gas welding, the following precautions, work procedures,
OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS
OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS Items needed for demonstrations: Fire extinguisher PPE (Personal Protective Equipment): o Lab coats/welding jackets o Leather gloves
G IG-2. INSTALLATION AND INSPECTION OF GAS SERVICE REGULATOR VENT LINE PROTECTORS (VLPs) [Interim Guideline]
![G IG-2. INSTALLATION AND INSPECTION OF GAS SERVICE REGULATOR VENT LINE PROTECTORS (VLPs) [Interim Guideline]](/thumbs/80/80450489.jpg "G IG-2. INSTALLATION AND INSPECTION OF GAS SERVICE REGULATOR VENT LINE PROTECTORS (VLPs) [Interim Guideline]")
LAST REVIEW DATE: REVIEW CYCLE: 2/17/15 5 Years INTERIM GUIDELINE: G-699-2-IG-2 TITLE: VOLUME: REGISTRATION NO. TARGET TRAINING GROUPS: INSTALLATION AND INSPECTION OF GAS [Interim Guideline] 3, 10 and
COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING
INCH-POUND 2 July 2010 SUPERSEDING A-A-55826 5 September 1996 COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING The General Services Administration has authorized the use
SAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures
Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury
Date Issued: 27 September 2018
1 Introduction This Standard Operating Procedure outlines the requirements for Compressed Gas Cylinder (cylinder) storage and transport. In accordance with Provincial Legislation, the Department of Environmental
Tri-Safem Model I1 Regulator. INSTRUCTIONS and PARTS
Tri-Safem Model I1 Regulator INSTRUCTIONS and PARTS USER RESPONSIBILITY This equipment will perform in conformity with the description thereof contained In this manual and accompanying labels andlor inserts
Chiyoda's High-Pressure Gas Control System and Equipment
Chiyoda's High-Pressure Gas Control System and Equipment 2012 CHIYODA HELPS YOUR GAS RELATED JOBS... Since the establishment 1946, we started as a manufacturer of Gas Welding & Cutting Equipment. Nowadays
BASF Corporation Title: Portable Multi-Gas Monitoring Equipment. Individual Unit Function: Safety Procedure No.: GSS09 Page: 1 of 5
Procedure No.: GSS09 Page: 1 of 5 RECORD OF REVISIONS Date Details of Change Sept. 01 The revision addresses the deletion of the tool room responsibilities and defines the new responsibilities for the
Cutting and shaping materials using thermal cutting equipment
Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
NAVSEA STANDARD ITEM. 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping for Unmanned Vessels; accomplish
NAVSEA STANDARD ITEM ITEM NO: 009-70 DATE: 10 JUN 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping for Unmanned Vessels; accomplish 2. REFERENCES:
Process gas requirements (Core, VWI, and OptiMix gas connect consoles)
Process gas requirements (Core, VWI, and OptiMix gas connect consoles) You must supply the process gases and supply gas plumbing for your cutting system. See Table 7 on page 46 for supply gas quality,
Doc No: WELDHOT Midland Engineering Co., Inc. Initial Issue Date 12/14/15 Safety Management System
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 7 PURPOSE To provide guidelines for the safe operation of welding, cutting and hot work of equipment, and to itemize
1 Exam Prep NFPA 99 Health Care Facilities Questions and Answers (Plumbing Contractor)
1 Exam Prep NFPA 99 Health Care Facilities Questions and Answers (Plumbing Contractor) 1. According to NFPA 99, SCFM is an acronym for. a) Surface Conditions at Fahrenheit Mercury b) Standard Conditions
CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT. Number: 2015 IFC Effective Date: February 1, 2017 Page 1 of 5
Subject: COMPRESSED GAS Reference: IFC, Denver Amendments, NFPA Approved: Manuel Almaguer Division Chief, Fire Prevention Division Number: 2015 IFC- 5301-1 Effective Date: February 1, 2017 Page 1 of 5
COMPANY HEALTH & SAFETY PROGRAM. Title: Welding & Cutting Section No: 45
Page 1 of 10 1.0 PURPOSE The purpose of this section is to heighten employee awareness of potential welding and cutting hazards, and to communicate acceptable work practices. It is intended that supervisors
IBEDA GAS MIXERS HIGHEST PRECISION FOR YOUR WELDING AND CUTTING PROCESSES
IBEDA GAS MIXERS HIGHEST PRECISION FOR YOUR WELDING AND CUTTING PROCESSES GAS SAFETY ENGINEERING GAS MANIFOLD SYSTEMS AUTOGENOUS ENGINEERING FLAME SPRAYING GAS MIXERS IBEDA GAS MIXERS FOR MANY AREAS OF
1.0 PURPOSE 2.0 SCOPE 3.0 DEFINITIONS. ANSI: American National Standards Institute. CCC: Chemical Control Centre
Revision Date: 5/17/2016 Page: 1 of 13 Health & Safety has developed the emergency eyewash & safety shower equipment procedure which will be implemented in 3 phases over the next four years. Phase 1 will
CITY AND COUNTY OF DENVER CR&CF RISK UNIT Compressed Gas Safety Standard
CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.5.11 Compressed Gas Safety Standard 1.0 Introduction 2.0 Scope This standard has been developed to protect all City and County of Denver employees and contractors
CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT
Reference: IFC, Denver Amendments, NFPA Approved: Joseph L. Gonzales, Division Chief, Fire Prevention and Investigation Division Number: IFC- 3001-1 Effective Date: February 1, 2012 Page 1 of 5 This policy
Digester Processes. 1. Raw Sludge Pumping System
Digester Processes 1. Raw Sludge Pumping System Removes accumulated sludge from the primary clarifiers, pumped through 1 of 2 pipes either 150 or 200mm in diameter (Fig. 1.1). Fig 1.1 Pipes feeding Digesters
2.0 Dates and Times Tests to be carried out starting Monday 28 Nov for completion Friday 2 Dec.
MS No: :. A 1.0 Scope of Work Preparation notes: delete column before issuing. 1.1 General Description of Works, Location & Boundaries Strength and tightness testing of Glycol System between plant room
CERTIFYING GASFITTER
No. 9196 REGISTRATION EXAMINATION, NOVEMBER 2016 CERTIFYING GASFITTER ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2016. All rights reserved. No part of this publication may be reproduced
INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1*
INSTRUCTIONS FOR CONVERTING CONDENSING GAS MOBILE HOME FURNACES MODEL SERIES: CMA3*, CMC1*, VMA3*, VMC1* THIS KIT CONTAINS: AOPS7741 (NATURAL TO PROPANE CONVERSION PARTS FOR MODEL SIZE, 50) AOPS7742(NATURAL
Gas Conversion Kits CERAMIC HEATER SERIES (1, 2, 3, 4 Burner Units)
DESCRIPTION These kits are designed to convert from one gas type to another (eg. from NATURAL to PROPANE or from PROPANE to NATURAL) only for new heaters (5 years or newer) by replacing the gas valve spring
POTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.09.1 Revision Date: 2011.06 Confined Space 1. PURPOSE 2. SCOPE 1.1. To properly designate Confined Spaces (CS) at Thompson Rivers University (TRU), to provide guidance to ensure the safety
GAS SUPPLY APPLICATION GUIDE
GAS SUPPLY APPLICATION GUIDE Natural Gas or Propane Modulating & Condensing Boilers and Water Heaters This document applies to the following models: Boilers AM 399B AM 500B AM 750B AM 1000B Gas-Fired Boilers
NAVSEA STANDARD ITEM. 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping; accomplish
NAVSEA STANDARD ITEM ITEM NO: 009-07 DATE: 17 JAN 2013 CATEGORY: I 1. SCOPE: 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping; accomplish 2. REFERENCES: 2.1 Standard Items
APPLYING VARIABLE SPEED PRESSURE LIMITING CONTROL DRIVER FIRE PUMPS. SEC Project No
APPLYING VARIABLE SPEED PRESSURE LIMITING CONTROL DRIVER FIRE PUMPS SEC Project No. 1803007-000 November 20, 2006 TABLE OF CONTENTS I. ABSTRACT...1 II. INTRODUCTION...1 III. HISTORY...2 IV. VARIABLE SPEED
THE FOLLOWING MATERIALS ARE FOUND IN THIS PACKET:
Date: Dear Customer: The following letter and enclosed information is VERY IMPORTANT. Please take the time to read ALL of the information presented. ***This form must be signed and returned as soon as
I. Subject: Compressed gas cylinders, regulators, and portable liquid systems.
I. Subject: Compressed gas cylinders, regulators, and portable liquid systems. II. Objective: To provide safe and effective use, storage, and transport of therapeutic gases. II. Procedure: A. Compressed
HANDBOOK SAFETY DEVICES. Ed SAFETY DEVICES DS-ED 01/ ENG 1
HANDBOOK Ed. 2017 DS-ED 01/2017 - ENG 1 CHAPTER 9 BURSTING DISC DEVICES IN SERIES 3070 SCOPE Use: protection against possible overpressure of the apparatuses listed below, with regard to the operating
WaterSense Specification for Spray Sprinkler Bodies. Version 1.0
Version 1.0 September 21, 2017 WaterSense Specification for Spray Sprinkler Bodies 1.0 Scope and Objective This specification establishes the criteria for labeling bodies of spray sprinklers 1 under the
BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England
BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England www.bcga.co.uk TECHNICAL INFORMATION SHEET 29 OXY-FUEL GAS EQUIPMENT
Gas Welding Hoses and connections, the weak link
Gas Welding Hoses and connections, the weak link By Leif Andersen, Technical Product Manager Welding, WSS Regulators with flashback arrestors and the shank with its welding or cutting attachment are made
Facilities and Estates. Natural Gas: Standard Operating Procedure. Document Control Summary. Contents
Facilities and Estates Natural Gas: Standard Operating Procedure Document Control Summary Status: Version: Author/Title: Owner/Title: Approved by: Ratified: Related Trust Strategy and/or Strategic Aims
Committee on NFPA 85
Committee on NFPA 85 M E M O R A N D U M TO: FROM: NFPA Technical Committee on Heat Recovery Steam Generators Jeanne Moreau DATE: April 23, 2010 SUBJECT: NFPA 85 F10 ROC Letter Ballot The ROC letter ballot
FM Approved - Automatic Water Control Valve as standard deluge valve. No formal approval available for coating. Foam Concentrate
December 6, 2010 Foam 31a 1. Description With Multiple Pilot Pressure Regulating Foam/Water Deluge Systems Supplied by a Bladder Tank, multiple pilot pressure regulating foam risers can be supplied from
ACS.TPCP1A SAFETY ASSESSMENT CRITERIA INITIAL AND RE-ASSESSMENT NON-DOMESTIC NATURAL GAS TESTING AND PURGING
ACS.TPCP1A SAFETY ASSESSMENT CRITERIA INITIAL AND RE-ASSESSMENT NON-DOMESTIC NATURAL GAS TESTING AND PURGING Issue 3.1 ACS.SMB 1 TPCP1A INITIAL & RE-ASSESSMENT Introduction Tests gas safety competencies
Compressed Gases Storage and Handling Safety Policy. Individual Unit Function: Safety Procedure No.: SOP-0103 Page: 1 of 6
Procedure No.: SOP-0103 Page: 1 of 6 MIDGA Reviewed: 07/09/18 Effective: 1/14/98 Supersedes: Original Preparer: Owner: Approver: Safety Safety Safety 1. PURPOSE The purpose of this procedure is to establish
The Unitor Gas Distribution System
The Unitor Gas Distribution System By Leif Andersen, Technical Product Manager Welding, WSS High-pressure gas cylinders inside the ship s hull is a safety risk to crew and vessel and should always be avoided.
MODULE 2 BRAZING CYLINDER TRANSPORT, STORAGE AND EQUIPMENT
MODULE 2 BRAZING CYLINDER TRANSPORT, STORAGE AND EQUIPMENT ISSUED BY REVISION NUMBER REVISION DATE DOCUMENT NUMBER S. GINBEY 0 7 th Nov 2016 QP74 Module 2 Cylinder Transport, Storage & Equipment ADR Regulations
Wet pipe low flow foam/water system
December 6, 2010 Foam 14a 1. The Viking Low Flow Foam/Water proportioning system, is a UL Listed and FM Approved system, for use with Viking supplied foam concentrates. This system consists of a standard
Safe Work Instructions For Oxygen Acetylene Equipment
Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018
Summary of the MRA LPG Codes of Practice
Summary of the MRA LPG Codes of Practice COP A1 DESIGN and INSTALLATION Code COP A1 deals with above ground installations where LPG is stored under pressure at ambient temperatures in fixed vessels larger
Eliminating Medical Gas Shutdowns for 10 years
Eliminating Medical Gas Shutdowns for 10 years Smart Tap is a tool used by hospitals. It has been used OVER 5000 TIMES to accomplish: Relocation of Bulk Gas Systems Relocation of zone valves Tie-ins of
Self-operated Pressure Regulators for special applications
Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic
Forged Brass Bellows Valves
Forged Brass Bellows Valves Designed Specifically For High Purity Gas Service Size Range - 0.625" to 4.125" Outer Diameter Size Product Features: Forged Brass Bodies - No Sand Castings Clean Area Assembled
Gas Distribution Connection Forms
Gas Distribution Connection Forms Updated on: 1 April 18 Gas Distribution Connection Forms S/No. Form No. Description 1 GDP101 Application for Gas Distribution Connection 2 GDP102 Consumer Project Data
Regulated Oil and Gas Companies under National Energy Board Jurisdiction
File 185-A000-41 8 August 2003 Regulated Oil and Gas Companies under National Energy Board Jurisdiction Dear Sir / Madam: Guidance Notes for Pressure Equipment under National Energy Board Jurisdiction
Standard: NFPA 86 Process Ovens and Furnaces. NFPA 85 Boiler and Combustion Systems Hazards Code
11699 Brookpark Road Cleveland, OH 44130 USA P: 216-749-2992 F: 216-398-8403 www.combustionsafety.com Why Test? Main and pilot safety shutoff valves keep fuel out of the firebox when equipment is shut
PRESSURE CONTROL REGULATORS
REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities
Risk Assessment. A guide to the safe storage and use of oxygen and dissolved acetylene equipment
Risk Assessment A guide to the safe storage and use of oxygen and dissolved acetylene equipment Introduction 2 INTRODUCTION From the 1st October 2006 the Regulatory Reform (Fire Safety) Order 2005 (RRO)
TOTAL CAPABILITIES IN THE PIPELINE INDUSTRY. UTILITY TECHNOLOGIES INTERNATIONAL CORPORATION Cincinnati Columbus West Jefferson
TOTAL CAABILITIES IN THE IELINE INDUSTRY UTILITY TECHNOLOGIES INTERNATIONAL CORORATION Cincinnati Columbus West Jefferson COMMON NATURAL GAS ENGINEERING ROBLEMS OGA SEMINAR DECEMBER 3, 2012 RELIEF VALVE
TECHNICAL DATA. Low-Flow Foam Preaction System with Hydraulically Actuated Concentrate Control Valve.
Foam 302 a 1. DESCRIPTION (Refer to Figure 1 on page 302 e.) The Viking Low-Flow Foam/Water Proportioning System is a UL Listed and FM Approved system, for use with 3M and Viking brand foam concentrate.
FROM THE CLASSICAL FIRE FIGHTING WATER SUPPLY TO STRUCTURE AND SMOKE GAS COOLING TAKING GLEINALMTUNNEL AS AN EXAMPLE; PART II
- 131 - FROM THE CLASSICAL FIRE FIGHTING WATER SUPPLY TO STRUCTURE AND SMOKE GAS COOLING TAKING GLEINALMTUNNEL AS AN EXAMPLE; PART II Kern H. AQUASYS Technik GmbH, Linz Austria ABSTRACT Traditionally fire
Temporary Connections to Process. Supersedes: 10/31/09 (Rev.02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager
Procedure No.: PA-020-0048 Page: 1 of 6 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document Revision Change Table Revision Number Revision Description Revised By Revision Date
Loss Prevention Standard
Loss Prevention Standard LPS 1186: Issue 3.1 Requirements and testing methods for check valves This standard specifies the design and performance requirements for check valves used in wet automatic sprinkler
Hot Work Program. California State University, Chico. Department of Environmental Health and Safety
California State University, Chico Department of Environmental Health and Safety May 2017 Table of Contents Section 1.0 Introduction... 1-1 2.0 Definitions... 2-1 3.0 Hot Work Precautions and Procedures...
ISO INTERNATIONAL STANDARD. Gas cylinders Safe handling. Bouteilles à gaz Sécurité de manutention. Second edition
INTERNATIONAL STANDARD ISO 11625 Second edition 2007-08-15 Gas cylinders Safe handling Bouteilles à gaz Sécurité de manutention Reference number ISO 2007 PDF disclaimer This PDF file may contain embedded
TEXAS TECH UNIVERSITY HEALTH SCIENCES CENTER EL PASO
TEXAS TECH UNIVERSITY HEALTH SCIENCES CENTER EL PASO Operating Policy and Procedure HSCEP OP: 75.35, Confined Space Entry Program PURPOSE: The purpose of this Texas Tech University Health Sciences Center
WNYF 2 nd issue COVER, 1967 photo by Frederick A. Schroeder
The gas for BUG was supplied from natural gas wells in Louisiana and Texas. The natural gas at the fire discussed above was distributed by a 350 psi pipeline to BUG, Con-Edison and Long Island Lighting
Australian/New Zealand Standard
AS/NZS 3788:2006 AS/NZS 3788:2006 Australian/New Zealand Standard Pressure equipment In-service inspection AS/NZS 3788:2006 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
MEMORIAL UNIVERSITY OF NEWFOUNDLAND Faculty of Engineering and Applied Science FLUID MECHANICS LABORATORY PIPE FRICTION
MEMORIAL UNIVERSITY OF NEWFOUNDLAND Faculty of Engineering and Applied Science FLUID MECHANICS LABORATORY PIPE FRICTION Objective To estimate the fluid pressure drops and roughness specifications for copper
NAVSEA STANDARD ITEM. 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping; accomplish
NAVSEA STANDARD ITEM ITEM NO: 009-07 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Confined Space Entry, Certification, Fire Prevention and Housekeeping; accomplish 2. REFERENCES: 2.1 Standard Items
Weld/Braze Tip Data. IMPORTANT: Use proper type of tip for each type torch. Airc o. N U M B E R Dril l Siz e. D E C I M A L Size
Note: This data has been compiled by Uniweld...We share this information and acknowledge that Uniweld s information is to the best of its ability for accuracy. Please use safe practices when welding, cutting
Installation and maintenance of twin 45kg LPG cylinder systems
LPG Association Code of Practice LPGA COP No 2 Installation and maintenance of twin 45kg LPG cylinder systems July 2014 LPG Association of New Zealand Inc PO Box 1776 Wellington New Zealand 2 Foreword
INSTITUTION OF GAS ENGINEERS AND MANAGERS
INSTITUTION OF GAS ENGINEERS AND MANAGERS UTILIZATION PROCEDURES ENHANCEMENTS. FEBRUARY 2009 (7 sides) These Enhancements apply to the following publications. However, it is not essential that these enhancements
UTAS EH&S INSTRUCTION No. 036 June 2012 Revision No. 3. Purging of Flammable Gas Equipment and/or Piping (Explosion Hazard)
Purging of Flammable Gas Equipment and/or Piping (Explosion Hazard) APPLICABILITY: This EH&S Instruction applies to UTAS sites worldwide, including contractors working at UTAS facilities. The document
CPX EMERGENCY STANDBY MANIFOLD INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
CPX EMERGENCY STANDBY MANIFOLD INSTALLATION, OPERATIONS & MAINTENANCE MANUAL Company Registered Office: Crown House, Stockport, Cheshire, SK13RB No. 850 0700 67 Registered in England and Wales No. 05058855
An Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Gas Products No. 335 (Supersedes Notice Gas Products No. 270, Ref No: N12-055) Effective Date: October 1, 2015 Date: July 21, 2014 Apply Before February 2, 2015 Announcing:
Working in Gas Hazard Areas
/ Health & Safety OPERATIONS STANDARDS Ref.: Aperam Safety ST 012 Working in Gas Hazard Areas Issue: 15.05.2012 Vers.: v0 Rev.: AM Safety ST 012 v1.2 08.05.2012 Working in Gas Hazard Areas Controlled Updated
APPENDIX A GLOSSARY AND ACRONYMS
APPENDIX A GLOSSARY AND ACRONYMS GLOSSARY To understand this manual, operators of small natural gas systems need to know the meaning of some commonly used terms. The terms are defined below for the purpose
Australian/New Zealand Standard
AS/NZS 1715:2009 AS/NZS 1715:2009 Australian/New Zealand Standard Selection, use and maintenance of respiratory protective equipment AS/NZS 1715:2009 This Joint Australian/New Zealand Standard was prepared
MAINTENANCE AND SAFETY OF CNG REFUELLING STATIONS
ISSN 1172-3416 NZ GCP 2 : 1993 NEW ZEALAND GAS CODE OF PRACTICE for MAINTENANCE AND SAFETY OF CNG REFUELLING STATIONS Issued by the Secretary of Commerce in accordance with the Gas Act 1992 THE GAS ACT
Confined Space in Construction
Confined Space in Construction 1926.1201 1926.1213 Confined space means a space that: 1. Is large enough and so configured that an employee can bodily enter it; 2. Has limited or restricted means for entry
BCGA GUIDANCE NOTE GN 23
BCGA GUIDANCE NOTE GN 23 Identifying Gas Safety Training Requirements in the Workplace 2012 BCGA GUIDANCE NOTE GN 23 Identifying gas safety training requirements in the workplace Copyright 2012 by British
Fire's Edge. Fire Pit or Fire Pit Insert Model 100A-M (Manual Operation) OWNER S MANUAL / OPERATING AND MAINTENANCE INSTRUCTIONS
Fire's Edge Fire Pit or Fire Pit Insert Model 100A-M (Manual Operation) OWNER S MANUAL / OPERATING AND MAINTENANCE INSTRUCTIONS For your safety: If you smell gas: 1. Shut off gas to the appliance 2. Extinguish
OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT
OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT Introduction: The oxy-acetylene torch can be used for various tasks. It can be used for cutting steel, welding steel, brazing and for heating metal. The oxy-acetylene
MANUFACTURING TECHNICAL INSTRUCTIONS - SAFETY FALL HAZARD CONTROL REQUIREMENTS SERIES & NO. SMI - 157
1 of 6 1.0 PURPOSE To establish minimum requirements and guidelines for controlling hazardous exposure of personnel to falls from working elevations in conformance with Federal and State OSHA rules and