Bar stock check valve designed for operation with any fluid. MODEL SELECTION
|
|
- Elwin Curtis
- 5 years ago
- Views:
Transcription
1
2 K1 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K1 ISI 316L* 78 1/4" NPT-F 1/4" NPT-F K06SV4NF4NF F51* K06V4NF4NF F55* K06EV4NF4NF LLOY 400* K06FV4NF4NF 276* K06GV4NF4NF K06HV4NF4NF I625* K06IV4NF4NF ISI 316L* 82 3/8" NPT-F 3/8" NPT-F K06SV6NF6NF F51* K06V6NF6NF F55* K06EV6NF6NF LLOY 400* K06FV6NF6NF 276* K06GV6NF6NF K06HV6NF6NF I625* K06IV6NF6NF ISI 316L* 86 1/2" NPT-F 1/2" NPT-F K06SV8NF8NF F51* K06V8NF8NF F55* K06EV8NF8NF LLOY 400* K06FV8NF8NF 276* K06GV8NF8NF WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NF8NF NOTE I625* K06IV8NF8NF * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
3 K2 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K2 ISI 316L* 78 1/4" NPT-F 1/4" NPT-M K06SV4NM4NF F51* K06V4NM4NF F55* K06EV4NM4NF LLOY 400* K06FV4NM4NF 276* K06GV4NM4NF K06HV4NM4NF I625* K06IV4NM4NF ISI 316L* 86 3/8" NPT-F 3/8" NPT-M K06SV6NM6NF F51* K06V6NM6NF F55* K06EV6NM6NF LLOY 400* K06FV6NM6NF 276* K06GV6NM6NF K06HV6NM6NF I625* K06IV6NM6NF ISI 316L* 93 1/2" NPT-F 1/2" NPT-M K06SV8NM8NF F51* K06V8NM8NF F55* K06EV8NM8NF LLOY 400* K06FV8NM8NF 276* K06GV8NM8NF WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM8NF NOTE I625* K06IV8NM8NF * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
4 K3 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K3 ISI 316L* 89 1/4" NPT-M 1/4" NPT-M K06SV4NM4NM F51* K06V4NM4NM F55* K06EV4NM4NM LLOY 400* K06FV4NM4NM 276* K06GV4NM4NM K06HV4NM4NM I625* K06IV4NM4NM ISI 316L* 90 3/8" NPT-M 3/8" NPT-M K06SV6NM6NM F51* K06V6NM6NM F55* K06EV6NM6NM LLOY 400* K06FV6NM6NM 276* K06GV6NM6NM K06HV6NM6NM I625* K06IV6NM6NM ISI 316L* 100 1/2" NPT-M 1/2" NPT-M K06SV8NM8NM F51* K06V8NM8NM F55* K06EV8NM8NM LLOY 400* K06FV8NM8NM 276* K06GV8NM8NM WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM8NM NOTE I625* K06IV8NM8NM * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
5 K4 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K4 ISI 316L* 90 6 O 1/4" NPT-M I625* K06IV6NM8 ISI 316L* K06SV8NM10 K06SV4NM6 F51* K06V4NM6 F55* K06EV4NM6 LLOY 400* K06FV4NM6 276* K06GV4NM6 K06HV4NM6 I625* K06IV4NM6 ISI 316L* 92 8 O 3/8" NPT-M K06SV6NM8 F51* K06V6NM8 F55* K06EV6NM8 LLOY 400* K06FV6NM8 276* K06GV6NM O K06HV6NM8 F51* K06V8NM10 F55* K06EV8NM10 LLOY 400* K06FV8NM10 276* K06GV8NM10 K06HV8NM10 I625* K06IV8NM10 1/2" NPT-M ISI 316L* K06SV8NM12 F51* K06V8NM12 F55* K06EV8NM12 LLOY 400* O K06FV8NM12 276* K06GV8NM12 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NM12 NOTE I625* K06IV8NM12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
6 K4 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K4 ISI 316L* 90 1/4 O 1/4" NPT-M I625* K06IV6N6 ISI 316L* K06SV8N8 K06SV4N4 F51* K06V4N4 F55* K06EV4N4 LLOY 400* K06FV4N4 276* K06GV4N4 K06HV4N4 I625* K06IV4N4 ISI 316L* 92 3/8 O 3/8" NPT-M K06SV6N6 F51* K06V6N6 F55* K06EV6N6 LLOY 400* K06FV6N6 276* K06GV6N /2 O K06HV6N6 F51* K06V8N8 F55* K06EV8N8 LLOY 400* K06FV8N8 276* K06GV8N8 K06HV8N8 I625* K06IV8N8 1/2" NPT-M ISI 316L* K06SV8N12 F51* K06V8N12 F55* K06EV8N12 LLOY 400* 102 3/4 O K06FV8N12 276* K06GV8N12 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8N12 NOTE I625* K06IV8N12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
7 K5 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K5 ISI 316L* 85 6 O 1/4" NPT-F I625* K06IV6NFM8 ISI 316L* K06SV8NFM10 K06SV4NFM6 F51* K06V4NFM6 F55* K06EV4NFM6 LLOY 400* K06FV4NFM6 276* K06GV4NFM6 K06HV4NFM6 I625* K06IV4NFM6 ISI 316L* 89 8 O 3/8" NPT-F K06SV6NFM8 F51* K06V6NFM8 F55* K06EV6NFM8 LLOY 400* K06FV6NFM8 276* K06GV6NFM O K06HV6NFM8 F51* K06V8NFM10 F55* K06EV8NFM10 LLOY 400* K06FV8NFM10 276* K06GV8NFM10 K06HV8NFM10 I625* K06IV8NFM10 1/2" NPT-F ISI 316L* K06SV8NFM12 F51* K06V8NFM12 F55* K06EV8NFM12 LLOY 400* O K06FV8NFM12 276* K06GV8NFM12 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NFM12 NOTE I625* K06IV8NFM12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
8 K5 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K5 ISI 316L* 85 1/4 O 1/4" NPT-F I625* K06IV6NF6 ISI 316L* K06SV8NF8 K06SV4NF4 F51* K06V4NF4 F55* K06EV4NF4 LLOY 400* K06FV4NF4 276* K06GV4NF4 K06HV4NF4 I625* K06IV4NF4 ISI 316L* 89 3/8 O 3/8" NPT-F K06SV6NF6 F51* K06V6NF6 F55* K06EV6NF6 LLOY 400* K06FV6NF6 276* K06GV6NF6 92 1/2 O K06HV6NF6 F51* K06V8NF8 F55* K06EV8NF8 LLOY 400* K06FV8NF8 276* K06GV8NF8 K06HV8NF8 I625* K06IV8NF8 1/2" NPT-F ISI 316L* K06SV8NF12 F51* K06V8NF12 F55* K06EV8NF12 LLOY 400* 94 3/4 O K06FV8NF12 276* K06GV8NF12 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205 K06HV8NF12 NOTE I625* K06IV8NF12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE.
9 K6 O 4,6 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K6 ISI 316L* 92 6 O 6 O I625* K06IVM8M8 ISI 316L* K06SVM10M10 K06SVM6M6 F51* K06VM6M6 F55* K06EVM6M6 LLOY 400* K06FVM6M6 276* K06GVM6M6 K06HVM6M6 I625* K06IVM6M6 ISI 316L* 96 8 O 8 O K06SVM8M8 F51* K06VM8M8 F55* K06EVM8M8 LLOY 400* K06FVM8M8 276* K06GVM8M O 10 O K06HVM8M8 F51* K06VM10M10 F55* K06EVM10M10 LLOY 400* K06FVM10M10 276* K06GVM10M10 K06HVM10M10 I625* K06IVM10M10 ISI 316L* O 12 O K06SVM12M12 F51* K06VM12M12 F55* K06EVM12M12 LLOY 400* K06FVM12M12 276* K06GVM12M12 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. K06HVM12M12 NOTE I625* K06IVM12M12 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. 0,5 Kg Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205
10 K6 O 4,6 MOEL SELETION MOEL RTING MTERIL PKING (OUT) (IN) OE WEIGHT TEHNIL SPE. K6 ISI 316L* 92 1/4 O 1/4 O I625* K06IV66 ISI 316L* K06SV88 K06SV44 F51* K06V44 F55* K06EV44 LLOY 400* K06FV44 276* K06GV44 K06HV44 I625* K06IV44 ISI 316L* 96 3/8 O 3/8 O K06SV66 F51* K06V66 F55* K06EV66 LLOY 400* K06FV66 276* K06GV /2 O 1/2 O K06HV66 F51* K06V88 F55* K06EV88 LLOY 400* K06FV88 276* K06GV88 K06HV88 I625* K06IV88 ISI 316L* 102 3/4 O 3/4 O K06SV1212 F51* K06V1212 F55* K06EV1212 LLOY 400* K06FV * K06GV1212 WG NME: LK dft - REV.: - TE: 07/12/ I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. K06HV1212 NOTE I625* K06IV1212 * Spring material: X10rNi18-8 I.T.E. s.r.l. OMMITS ITSELF TO ONSTNTLY IMPROVE ITS PROUTS N THEREFORE IT RESERVES THE RIGHT TO MOIFY T, FETURES WITHOUT NOTIE. 0,5 Kg Max operating pressure: 420 ar Hydraulics pressure test: 630 ar Pneumatic sealing test: 6 ar Opening differential pressure: 0.2 ar Perfect tightness with d.p.: 0.2 ar Temperature range: -20 / +205
11 HEK VLVES MOEL K HEK VLVE K RTING PSI PSI MTERIL S isi 316L 105 F51 E F55 F Monel 400 G 276 Hastelloy H 6 Mo/F44 I Inconel 625 PKING V VITON IN 4 1/4" 6 3/8" 8 1/2" 12 3/4" 20 M20 x 1,5 THRE N NPT I SPP GS (ISO 1179) R SPP GS (EN 837-1) - Gauge connection K SPT R/R (IS) S Socket Weld M ISO THRE TYPE M MLE F FEMLE OUT (Same as "IN" standard) 4 1/4" 6 3/8" 8 1/2" 12 3/4" 20 M20 x 1,5 THRE (Same as "IN" standard) N NPT I SPP GS (ISO 1179) R SPP GS (EN 837-1) - Gauge connection K SPT R/R (IS) S Socket Weld M ISO THRE TYPE(Same as "IN" standard) M MLE F FEMLE EX.: K 0 6 S V 8 N M 8 N M
DIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIL PRESSURE REGULTING VLVE zon Body material pressure diameter Max. temperature Grey cast iron DN 120 according to the pressure equipment directive 2014/68/UE E marking for DN 065 FETURES compact
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationStainless steel valves for corrosive environments & water base fluids
www.atos.com Table E135-10/E Stainless steel valves for corrosive environments & water base fluids explosion-proof soleid valves, with tex, IEEx or UL US certification and pressure relief valves LOHX(S)6-3/M-O/V
More informationDIFFERENTIAL PRESSURE REGULATING VALVE
Y- DIFFERENTIAL PRESSURE REGULATING VALVE zon body material pressure diameter max. temperature brass 6 bar -50 according to the pressure equipment directive 4/68/UE does not require E marking FEATURES
More informationModel NDA Differential pressure transmitter. Deltapi N Series A complete range of pneumatic pressure transmitters
Data Sheet DS/NDA-EN Rev. H Model NDA Differential pressure transmitter Deltapi N Series A complete range of pneumatic pressure transmitters Introduction The blind type differential pressure transmitter
More informationADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)
TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator
More informationSeries 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationBlanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
More informationHand & mechanical directional valves
www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,
More informationGauge Valves / Multi-Port Valves & Air Distribution Manifolds
auge Valves / Multi-Port Valves & ir istribution Manifolds OV Series Orifice valves 6,000 psi and 10,000 psi rated V Series Multi-port gauge valves 6,000 psi and 10,000 psi rated PV Series Rising plug
More informationCash Valve CRYOGENIC CONTROLS. ISSUED - FEBRUARY 2000 CAVMC-0514-US-0208 ISO 9001 Certified
ash Valve RYOGENI ONTROLS ISSUED - FERURY 2000 VM-0514-US-0208 ISO 9001 ertified RYOGENI ONTROLS WORD OUT RYOGENIS... ryogenics the science of materials at extremely low temperatures has become more and
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationMEASURING INSTRUMENTS - STRUMENTI PER MISURARE
MEASURING INSTRUMENTS - STRUMENTI PER MISURARE SPECIAL PRESSURE GAUGE MN9 capsule pressure gauges DS 2.5 (63mm) PED 201/68/UE For measurement of low pressure and vacuum, for use on gas and dry air. 2.09.1
More informationDIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIAL PRESSURE REGULATING VALVE zon Body material pressure diameter Max. temperature Brass DN 15-50 120 according to the pressure equipment directive 2014/68/UE does not require E marking FEATURES
More informationPilot valves for pilot operated servo valves
Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)
More informationATM/Ex - Analog Pressure Transmitter
Pressure Transmitter - ATEX certified ATM/Ex - Analog Pressure Transmitter CUSTOMER BENEFITS Certificate: ATEX & EAC Fast customization thanks to configurable product design Demountable electrical connector
More informationPRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified
Intrinsically safe pressure transmitters ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified CUSTOMER BENEFITS Certificate: ATEX & IECEx Fast customization thanks to configurable
More informationSandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve
Technical Information Series PRM General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to
More informationProducts no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationExplosion proof pressure switch Model: P953 series
Explosion proof pressure switch Model: P953 series Spec. sheet no. PD09-08 Service intended P953 diaphragm type differential pressure switch can be used in a variety of process lines. Internal micro switch
More informationPRESSURE & TEMPERATURE GAUGES PRESSURE TEMPERATURE. Catalogue H20200a
PRESSURE & TEMPERATURE GAUGES PRESSURE Catalogue TEMPERATURE Applications The label Trafag Industrial Components extends the Trafag brand name to instruments manufactured by qualified partner companies.
More informationATM - Analog Pressure Transmitter
Pressure Transmitter ATM - Analog Pressure Transmitter CUSTOMER BENEFITS Fast customization thanks to configurable product design Demountable electrical connector option to allow adjustment of zero and
More informationRoyal Process Gauges, ±0.5% Accuracy 316 SS Tube and Socket Dial Size
Dial Sizes: 4 1 /2 Case: Standard with style #2 case; Polypropylene safety case (solid front, blow-out back) suitable for surface or direct mounting. 11 Bourdon Tube: 316 stainless steel Socket: 316 stainless
More informationATM.1ST/Ex - High Precision Transmitter
Pressure Transmitter - ATEX / IECEx certified ATM.1ST/Ex - High Precision Transmitter CUSTOMER BENEFITS Certificate: ATEX, IECEx & EAC High measurement accuracy is ensured by sophisticated digital temperature
More informationBall Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
86300 Pag. 9.6 86310 Pag. 9.6 86320 Pag. 9.6 86330 Pag. 9.6 86700 Pag. 9.6 86710 Pag. 9.7 86720 Pag. 9.7 6300 Pag. 9.7 6310 Pag. 9.7 6400 Pag. 9.8 6410 Pag. 9.8 6560 Pag. 9.8 6570 Pag. 9.8 86900 Pag. 9.9
More informationZUERCHER MRCib Series
Pressure/Vacuum Rating Max inlet pressure: 16 bar Full Vacuum Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage rate C Control Spring
More informationVBGx-xx-xx Externally Threaded Control Ball Valves PN25 (DN15 TO DN32)
VGx-xx-xx Externally Threaded Control all Valves PN25 (DN15 TO DN32) PPLICTION The VG2 2-Way and VG3 3-Way Control all Valves control hot and chilled water with glycol solutions up to 50% according to
More informationPressure Calibrators. Series PC..., PM...
Pressure Calibrators Series PC..., PM... SIKA-Precision Pressure Calibrators, Series PC..., PM... We help you, if you are under pressure! Pneumatic pressure calibrators PM 25 A, PM 25 D, PM 110 PIC pressure
More informationATM.1ST. Pressure transmitters CUSTOMER BENEFITS
Pressure transmitters ATM.1ST CUSTOMER BENEFITS High precision pressure sensor over the whole temperature range Electronic compensation Modular sensor structure (any process and electrical connections
More informationSTA-F Description. STA-F Prefab insulation Measuring nipples
TA STA-F 5-5-1 5 Balancing valves September 1985 STA-F is a flanged balancing valve available in sizes DN 20-300, and has been designed with an oblique seat in order to give low resistance and large flows
More informationTechnical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
More informationMechanical Pressure Measurement
Mechanical Pressure Measurement Differential Pressure Gauges Model GDP, Universal Version, with Diaphragm Element High Overpressure Safety PN 40, 100, 250 or 400 Applications Differential pressure measurement
More informationCASH VALVES CRYOGENIC VALVES AND CONTROLS
broad range of pressure build regulators, pressure reducing valves, final line gas valves and combination pressure build economizer valves for cryogenic service FETURES Six models for pressure reducing
More informationP9000 Series Pressure Transducer
High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESRIPTION The P9000 Series is a range of advanced,
More informationPRESSURE COMPENSATORS TECNORD
PRESSURE COMPENSATORS 2-way, Compensating / Reducing Valves GPM PSI LPM BAR MODEL CAVITY PAGE 8 3500 30 245 DF-CP2 7/8 14 UNF 60 16 3500 60 245 QC-CP2 Special 62 Typical Schematic Typical application for
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed
More informationW68/W88/W98 Series CONTROL VALVES
W68/W88/W98 Series ONTROL VLVES Throttling or regulating valves are designed for flow and pressure control applications. Fluid flows against the tapered curve of the valve seat allowing a calculated amount
More informationSUN WP INDUSTRIAL VALVES INDUSTRIAL VALVES 2-PIECE BALL VALVE FULL BORE. STANDARD PART NUMBERS Art female/female. Art.
INDUSTRI VVES SUN WP PIEE VVE FU ORE UNI EN ISO : ertificato n / MIN STNDRD FETURES ONSTRUTION: ISI ERTIFITIONS: DVGW for gas TÜV for T uft DIMETER: from DN /" to DN " PRESSURES: from R to R TEMPERTURE
More informationOverview of types. Technical data. Safety notes
Technical data sheet R2..-S.. Open-close ball valves, 2-way, with internal thread For open and closed cold and warm water systems For shut-off functions on the water side and 2-point controls in U and
More informationFlow Divider / Combiner Cartridge Valves
Flow Divier / Cominer Vlves Type Pge Divie Only 9 Divier / Cominer, Close Centre 95 Synhronizing Divier / Cominer 96 Divier / Cominer, Close Centre, High 97 Int l Shortut Ctlogue #999-901-1 9 Flow Divier
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationSITRANS P measuring instruments for pressure
Remote seals for transmitters and pressure gauges Technical description Overview In many cases the pressure transmitter and the measured medium have to be physically separated. It is then necessary to
More informationPressure Sensing Valve - Model 4023
Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge
More informationPressure gauge with plastic case
Pressure gauge with plastic case Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationPressure gauges EN All stainless steel construction PBX100, PBX150 (1.18) Functional and constructive characteristics
Pressure gauges FT PBX 100-150-E-9.02 All stainless steel construction PBX100, PBX150 (1.18) EN 837-1 These instruments are designed for use in food, beverage, pharmaceutical, cryogenics, chemical and
More informationPressure gauges EN Safety pressure gauges solid-front PBXSF100, PBXSF150 (1.20) Functional and constructive characteristics
Pressure gauges FT PBXSF 100-150-E-9.02 Safety pressure gauges solid-front PBXSF100, PBXSF150 (1.20) EN 837-1 These Solid-Front instruments are built in accordance with safety specifications of EN 837.1
More informationDiaphragm monitoring system with threaded connection For the chemical and petrochemical industries Model DMS34
Pressure Diaphragm monitoring system with threaded connection For the chemical and petrochemical industries Model DMS34 WIKA data sheet DS 95.18 Applications Chemical/petrochemical industry, oil/gas industries
More informationATM/GR. Electronic pressure switches CUSTOMER BENEFITS
Electronic pressure switches ATM/GR CUSTOMER BENEFITS Pressure sensor with integrated switching contacts Modular sensor structure (any process and electrical connections can be combined) Manual readjustment
More informationRosemount 3159 Nuclear Qualified Remote Diaphragm Seal
Rosemount 3159 Nuclear Qualified Remote Diaphragm Seal FOR USE ON ROSEMOUNT 3152, 3153, AND 3154 TRANSMITTERS Qualified per: o IEEE Std 323-1974/1983/2003 o IEEE Std 344-1975/1987/2004 112 Mrad (1.12 MGy)
More informationCompact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
More information1 Overview. Pressure Measurement Remote seals for transmitters and pressure gauges SITRANS P320/P420. 1/352 Siemens FI US Edition
Siemens AG 08 Technical description Overview In many cases the pressure transmitter and the measured medium have to be physically separated. It is then necessary to use a remote seal. The remote seals
More informationMAINTENANCE AND OPERATING MANUAL
MAINTENANCE AND OPERATING MANUAL Cyclone condensate separator Type ASA EN EN Maintenance and operating manual Purpose and appropriate use Dear Customer, thank you for choosing our product. In order to
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
More informationOverview of types. Technical data
Technical data sheet R2..xx-S.. Characterised control valves, 2-way, with internal thread For open and closed cold and warm water systems For modulating water-side control of U and heating systems ir bubble
More informationHydraulic hand test pump Models CPP700-H and CPP1000-H
Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory
More informationManual retractable fitting with safe-to-operate rotary drive
Manual Retractable Fittings SensoGate W M Manual retractable fitting with safe-to-operate rotary drive Revolutionary operation The SensoGate W M has a manual rotary drive, which enables the fitting to
More informationTBV Series 5100 Diverter/Three-Way Ball Valve
TBV Series 5100 Diverter/Three-Way Ball Valve TBV Series 5100 Ball Valve Manifolding Diverting Blending Replaces the use of two or more two-way valves Cameron s TBV brand offers the Series 5100 diverter/three-way
More informationSpecification sheet. Deltapi N Series Pneumatic Transmitters Model NDD Gauge pressure transmitter with remote diaphragm seal GENERAL CHARACTERISTICS
Specification sheet eltapi N Series Pneumatic Transmitters Model N auge pressure transmitter with remote diaphragm seal ENER HRTERISTIS The blind type pressure transmitter, mod. N, is used to measure a
More informationAE50S Automatic Air and Gas Vent for Liquid Systems Installation and Maintenance Instructions
0176050/3 IM-P017-11 ST Issue 3 AE50S Automatic Air and Gas Vent for Liquid Systems Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4
More informationHand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationAxial piston pumps type PVC
www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise
More informationEXAMPLE 1 PAGE: 1 Instrument type PBX100LA 3 2 Pressure range bar 55 3 Electrical device I-1-Hz contact 61 4 Any options Blow-out plug 57-58
GENERL INFORMTION This specification document is for pressure gauges manufactured by: STIKO, Industrieweg 5, 9301 LM Roden, The Netherlands. STIKO is a manufacturer of mechanical instruments in the area
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationAxial piston pumps type PVC
www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low
More informationFIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:
LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are
More information506 SERIES SINGLE ARM HOSE REELS
506 SERIES SINGLE RM pplications: elivery of compressed air, low pressure water and fluids; medium pressure lubricants, high pressure hot and cold water and high pressure grease in vehicle maintenance
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationCLEAN AGENT FIRE EXTINGUISHING SYSTEM MX 1230 Extinguishing Agent Cylinders
The technical data described herein is for components of the Minimax Fire Products MX 30 Clean Agent System. For design, installation, and operation instructions, refer to the latest edition of the original
More informationDiaphragm Accumulators
1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in hydro-pneumatic accumulators for storing fluids.
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as
More informationVAREC 180 SERIES PRESSURE REGULATORS
Double port regulators with a variety of model options for upstream and downstream pressure control FETURES Large diaphragm and a unique double port design achieve a sensitivity of less than 5%. Set pressure
More informationSpin-On Filters SSF 24,25
Spin-On Filters SSF,5 Technical Specification Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections Flow rate Working pressure Operating temperature By-pass valve Clogging indicators
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationNew Positioners being introduced
VLVES CTUTORS HIGH PURITY PIPING INDUSTRIL PIPING ENVIRONMENTL PIPING WET PROCESS SOLUTIONS March 12, 2012 PRODUCT MODIFICTION NNOUNCEMENT New Positioners being introduced sahi/merica has changed the manufacturer
More informationProgrammable pressure and temperature transmitters PTM/RS485
Programmable pressure and temperature transmitters PTM/RS485 Version: 26.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationINDUSTRIAL. Pressure Transmitters. Product Guide. Low cost to high accuracy portfolio. Ranges from 70 mbar to 1400 bar. Flexible, rugged and reliable
INDUSTRIAL Pressure Transmitters Product Guide Low cost to high accuracy portfolio Ranges from 70 mbar to 1400 bar Flexible, rugged and reliable Fixed and rangeable 4-20mA outputs Electrical/pressure connection
More informationGas Filters DN15 DN300. delta-elektrogas.com EE151 03/17
FG Gas Filters DN15 DN300 delta-elektrogas.com EE151 03/17 FG Gas Filters Contents Description.. 2 Features.. 2 Functioning and application. 3 Technical specifications 4 Gas flow chart (pressure drop)
More informationZEFIRO series NITROGEN GENERATORS. The constant and completely autonomous supply of nitrogen flux DESIGN AND PRODUCTION OF LABORATORY GAS GENERATORS
R R Cinel Strumenti Scientifici was founded in Padua in the 70 s with a technical partnership of INFN LNL Legnaro Laboratory on particle accelerator projects and since then has been involved in some of
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPlant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
More informationSPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B:
Catalog HY14-255/US Technical Information General Description sandwich type pressure s are typically used in combination with proportional directional control valves. The keeps the pressure drop over the
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationProducts no longer available
Technical data sheet R3 / R3G Change-over ball valve, 3-way, with internal thread for closed cold and warm water systems for switching functions on the water side and 2-point controls in air-handling and
More informationValve Inspection & Testing
Inspection & Testing in accordance with API 598 Valve Inspection & Testing Shell Test (Body Hydro Test): - Each valve shall be tested in accordance with ASME B 16.34 for ASME valves. Shell test pressure
More informationASK HEROSE HEROSE NEWS NEW! EXCLUSIVE STOCK GENERANT SDC SERIES FOR DOT-4LC AND TC-4LM LIQUID CYLINDERS SILENT OPENING LCV & POP ACTION CRV CALL NOW!
HEROSE NEWS CALL CLICK FOR EMAIL info@ WINTER 2015 / 2016 IN STOCK NOW! TAMPER PROOF DEVICE GENERANT SDC SERIES FOR DOT-4LC AND TC-4LM LIQUID CYLINDERS The connection system is supplied for installation
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationElectromechanical pressure switches
References : pages / and / page /5 Presentation Functions Pressure switches type XMX and XMA are switches for control circuits, with an adjustable differential. They are used to control the pressure of
More information230 kv Aluminum Welded Terminal Connectors
230 kv luminum 230 kv luminum Welded TYPE 15950, 15960 Flexible Rope Lay ssemblies luminum flexible rope lay assemblies are designed to connect to aluminum or copper pads. Pads conform to NEM standards.
More informationOperation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
More information