Comparing rapid sensory approaches
|
|
- Cory McBride
- 5 years ago
- Views:
Transcription
1 Comparing rapid sensory approaches Christian Dehlholm, Senior Consultant, Danish Technological Institute 1
2 Why descriptive! 1900 quality scoring and grading Focus on differentiating products 1930 Grading Foods by a Descriptive Method Early descriptive whole product system Minimising assessor subjectivity 1930s and 40s Selecting the right assessors Development of scales 1950 Modern sensory evaluation The Flavor Profile by Cairncross & Sjostrom C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 3 TDS/TOS PM/Napping Sorting Pick-any/ CATA 2
3 Validity and reliability Comparisons between methods and panels Holistic! C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 5 Overall configurations compared C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 6 3
4 Confidence Conventional Profile Panel A Panel B C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 7 Confidence Global Napping Panel A Panel B C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 8 4
5 Confidence Overview Panel A Panel B Conventional Profile 9-10 h Flash Profile 3 h Partial Nappings 80 min Free Multiple Sorting 60 min Global Napping 40 min C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 9 Confidence Overview Panel A Panel B Conventional Profile 9-10 h Flash Profile 3 h Partial Nappings 80 min Dim 2 (20.59 %) Appearance P5 Free Multiple P3 P7P6 P4 Sorting P8 P1 P2 P9 Global -4-2 Napping Dim 1 (44.94 %) Dim 2 (22.23 %) Taste P5P1 P9 P7 P4 P2 P8 P6 P Dim 1 (27.59 %) Dim 2 (19.71 %) P3 P9P4 Mouthfeel P5 P1 P2 60 min P7 P8 P6 40 min Dim 1 (34.03 %) C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 10 5
6 Semantics Overview Panel P1 P2 P3 P4 P5 P6 P7 P8 P9 Conventional Profile Flash Profile Free Multiple Sorting Global Napping Appearance Partial Nappings Conventional Profile Flash Profile Free Multiple Sorting Global Napping Taste Partial Nappings Conventional Profile Flash Profile Free Multiple Sorting Global Napping Mouthfeel Partial Nappings C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 11 Conclusions 1 Correlation between evaluation time and reliability Semantic differences Free Multiple Sorting Comparable to projective mapping Provides categorical data instead of Euclidean Partial Napping Closer relationship to conventional profiling Possibility to isolate single modalities -> directing perception Small changes could have large effects 6
7 Consensus vs. Individual Panelists vs. Experts Group no. Assessor type Evaluation type Evaluation method G0 Trained panel Individual Conventional profiling G1 Trained panel Individual Napping (GN/PN) G2 Trained panel Individual Napping (GN/PN) G3 Trained panel Consensus Napping (PN) G4 Trained panel Consensus Napping (PN) G5 Trained panel Consensus Attribute rating G6 Trained panel Consensus Attribute rating G7 Experts Consensus Attribute rating G8 Experts Consensus Attribute rating G9 Experts Consensus Attribute rating C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 13 Conclusions 2 Product experts less in common with references than trained panel Semantic differences Not recommended to compare consistency between consensus groups Product training could change the picture Horizontal vs. vertical frame dimensions Geometry matters theoretically Rectangular geometry promotes two-dimensionality Semantics improve the model 7
8 PM on sound News speaker Lisa Ekdahl Rage Against the Machine C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 15 PM on sound with naïve assessors (projection strategies) C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 16 8
9 PM on sound with naïve assessors (projection strategies) News Rage Against First Second Third Projection strategy Lisa Ekdahl Total (%) recording The Machine session session session 1) Linear (one-way) 45% 30% 30% 31% 36% 37% 35% 2) L or T (two-way) 12% 20% 16% 14% 18% 16% 16% 3) Dispersed 16% 13% 22% 19% 18% 13% 17% 4) Lumpy 14% 11% 10% 8% 14% 12% 12% 5) Categorical 6% 10% 7% 10% 6% 7% 8% 6) Categorical dbl. linear 6% 5% 10% 7% 4% 10% 7% 7) Other 1% 11% 6% 10% 4% 5% 6% Total (n) C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 17 Conclusions 3 Possible for naïve assessors to use projective mapping (on sound) Variations in projection strategy Categorisation of strategies One- and two-dimensional projection strategies > 50% Dispersed projections < 1/6 Might affected by Sample complexity Method experience Data analytical approach does not match evaluation method Might explaining noise in data 9
10 Choosing the right method! Main considerations C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 20 10
11 Sensory assessor types C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 21 Training The attribute Personal constructs Aligned panel Misaligned panels C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 22 11
12 Conclusions 4 Configurations Methods separate in similar ways (main dimensions) Less time -> weaker separations Semantics Same methods provide different descriptions Predetermined vocabularies -> predetermined results Product approach Holistic approaches allow a closer-to-real product separation A rapid approach is easy to administer General issues Simpler methods might be difficult to understand (simple instructions) Holistic methods does not provide intensity data Analytical methods does minimalize conceptual reality Future developments Concept Scaling C. Dehlholm, Nordic Workshop, 22 May 2013 Slide 24 12
13 Use rapid approaches For an overview of unknown products As a basis for sampling to larger experiments In NPD, in idea and exploration phases New semantics are wished -> Proj. mapping (Global Napping, consumers) Directed semantics are wished -> Partial Napping, panel Pre-known semantics are wished -> Flash Profile (with introduced vocabulary) Thank you! 13
Autodesk Moldflow Communicator Process settings
Autodesk Moldflow Communicator 212 Process settings Revision 1, 3 March 211. Contents Chapter 1 Process settings....................................... 1 Profiles.................................................
More informationTesting and Validation of the Triton Sodar
Testing and Validation of the Triton Sodar September 24, 2008 AWEA Resource Assessment Workshop Ron Nierenberg, Consulting Meteorologist Liz Walls, Second Wind Inc. Ron Consulting Nierenberg Meteorologist
More informationWade Reynolds 1 Frank Young 1,2 Peter Gibbings 1,2. University of Southern Queensland Toowoomba 4350 AUSTRALIA
A Comparison of Methods for Mapping Golf Greens Wade Reynolds 1 Frank Young 1,2 Peter Gibbings 1,2 1 Faculty of Engineering and Surveying 2 Australian Centre for Sustainable Catchments University of Southern
More informationLifecycle Performance of Escape Systems
Lifecycle Performance of Escape Systems A look at laboratory vs field conditioning of aramid fiber based escape systems. By James Hunter, Cedric Smith, Ole Kils and Tyler Mayer for ITRS 2018 1.1 Introduction
More informationSouth King County High-Capacity Transit Corridor Study
HIGH-CAPACITY TRANSIT CORRIDOR STUDY South King County Corridor South King County High-Capacity Transit Corridor Study Corridor Report August 2014 South King County High Capacity Transit Corridor Report
More informationBasketball Packaging. Basketball Packaging. 1 of 10. Copyright 2008, Exemplars, Inc. All rights reserved.
The Bouncing Basketball Company is looking to design a new carton to ship 24 basketballs. Each basketball comes in a box that measures 1 foot on every side, and the company wants to put 24 of these boxes
More informationPress Release. Friction Stir Welding: Grenzebach extends its portfolio
Friction Stir Welding: Grenzebach extends its portfolio Higher dynamics, higher welding speeds, lower process forces and even higher quality welding seams and welding surfaces: at the Düsseldorf Schweissen
More informationVariable Face Milling to Normalize Putter Ball Speed and Maximize Forgiveness
Proceedings Variable Face Milling to Normalize Putter Ball Speed and Maximize Forgiveness Jacob Lambeth *, Dustin Brekke and Jeff Brunski Cleveland Golf, 5601 Skylab Rd. Huntington Beach, CA 92647, USA;
More informationCS 4649/7649 Robot Intelligence: Planning
CS 4649/7649 Robot Intelligence: Planning Differential Kinematics, Probabilistic Roadmaps Sungmoon Joo School of Interactive Computing College of Computing Georgia Institute of Technology S. Joo (sungmoon.joo@cc.gatech.edu)
More informationAn Analysis of the Travel Conditions on the U. S. 52 Bypass. Bypass in Lafayette, Indiana.
An Analysis of the Travel Conditions on the U. S. 52 Bypass in Lafayette, Indiana T. B. T readway Research Assistant J. C. O ppenlander Research Engineer Joint Highway Research Project Purdue University
More informationWest LRT Workshop Session Welcome Stony Plain Road from 149 Street to 124 Street May 12, 2010
West LRT Workshop Session Welcome Stony Plain Road from 149 Street to 124 Street May 12, 2010 Tonight's Meeting Purpose To provide more detailed information on West LRT concept engineering To provide specific
More informationType overview. R B2 en-gb subject to changes 1
Technical data sheet R30..-..-..-B2 Characterised control valve, 6-way, Internal thread Two sequences (cooling/heating) with one 90 rotary actuator Switching or modulating control on the water side of
More informationScissor Mechanisms. Figure 1 Torero Cabin Service Truck. Scissor Mechanism was chassis mounted and lifted the cabin to service aircraft
Scissor Mechanisms Scissor mechanisms are very common for lifting and stabilizing platforms. A variety of manlifts, service platforms and cargo lifts utilize this visually simple but structurally complex
More informationEVALUATION OF ENVISAT ASAR WAVE MODE RETRIEVAL ALGORITHMS FOR SEA-STATE FORECASTING AND WAVE CLIMATE ASSESSMENT
EVALUATION OF ENVISAT ASAR WAVE MODE RETRIEVAL ALGORITHMS FOR SEA-STATE FORECASTING AND WAVE CLIMATE ASSESSMENT F.J. Melger ARGOSS, P.O. Box 61, 8335 ZH Vollenhove, the Netherlands, Email: info@argoss.nl
More informationVibration Analysis and Test of Backup Roll in Temper Mill
Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com Vibration Analysis and Test of Backup Roll in Temper Mill Yuanmin Xie College of Machinery and Automation, Wuhan University of Science and
More informationWell Control Modeling Software Comparisons with Single Bubble Techniques in a Vertical Well
Well Control Modeling Software Comparisons with Single Bubble Techniques in a Vertical Well Jace R. Larrison, P.E. Blowout Engineers, LLC Recent advances in well control modeling simulators have incorporated
More informationSFHGEN77 - SQA Code HD48 04 Perform first line calibration on clinical equipment to ensure it is fit for use
Perform first line calibration on clinical equipment to ensure it is fit for Overview This standard relates to first line calibration of specific equipment prior to clinical. Individuals will be able to
More informationRounding Whole Numbers
s e s s i o n 1. 7 A Rounding Whole Numbers Math Focus Points Using place value understanding to round whole numbers to the nearest ten or hundred Telling time to the nearest 5 minutes and measuring time
More informationWhat do consumers think about aquaculture fish and the products made from it? Co-funded by the Seventh Framework Programme of the European Union
What do consumers think about aquaculture fish and the products made from it? Co-funded by the Seventh Framework Programme of the European Union What we know... Aquaculture supply approximately 50% of
More informationCarrier Gases in Capillary GC
Carrier Gases in Capillary GC GC Columns and Consumables Abby Folk Application Scientist January 15, 2008 CARRIER GAS Mobile Phase Carries the solutes down the column Selection and velocity influences
More informationDesign of a double quadruped for the Tech United soccer robot
Design of a double quadruped for the Tech United soccer robot M.J. Naber (0571509) DCT report number: 2009.134 Master Open Space project Eindhoven, 21 December 2009 Supervisor dr.ir. P.C.J.N. Rosielle
More informationAutomating Injection Molding Simulation using Autonomous Optimization
Automating Injection Molding Simulation using Autonomous Optimization Matt Proske, Rodrigo Gutierrez, & Gabriel Geyne SIGMASOFT Virtual Molding Autonomous optimization is coupled to injection molding simulation
More informationAn Overview of Mn/DOT s Pavement Condition Rating Procedures and Indices (September 2015)
An Overview of Mn/DOT s Pavement Condition Rating Procedures and Indices (September 2015) Equipment Mn/DOT currently collects pavement condition data using a Pathway Services, Inc. Digital Inspection Vehicle
More informationEXPERIMENTAL RESULTS OF GUIDED WAVE TRAVEL TIME TOMOGRAPHY
18 th World Conference on Non destructive Testing, 16-20 April 2012, Durban, South Africa EXPERIMENTAL RESULTS OF GUIDED WAVE TRAVEL TIME TOMOGRAPHY Arno VOLKER 1 and Hendrik VOS 1 TNO, Stieltjesweg 1,
More informationINNOVATIVE BROACHING TECHNOLOGY
INNOVATIVE BROACHING TECHNOLOGY Innovative Broaching Technology. In the field of metal cutting for mass production of parts with complex profiles MANUFACTURING OF COMPLEX PROFILES the broaching operation
More informationRIGGING INTRODUCTION ADJUSTMENTS
RIGGING In rowing rigging is a generic term used to cover both gearing and the rig. Strictly speaking rigging applies to the type of boat and oars while gearing is the arrangement to match the load to
More informationD-Case Modeling Guide for Target System
D-Case Modeling Guide for Target System 1/32 Table of Contents 1 Scope...4 2 Overview of D-Case and SysML Modeling Guide...4 2.1 Background and Purpose...4 2.2 Target System of Modeling Guide...5 2.3 Constitution
More informationAn Overview of Mn/DOT s Pavement Condition Rating Procedures and Indices (March 27, 2003)
An Overview of Mn/DOT s Pavement Condition Rating Procedures and Indices (March 27, 2003) Equipment Mn/DOT currently collects pavement condition data using a Pathway Services, Inc. Video Inspection Vehicle
More informationMeasurement and simulation of the flow field around a triangular lattice meteorological mast
Measurement and simulation of the flow field around a triangular lattice meteorological mast Matthew Stickland 1, Thomas Scanlon 1, Sylvie Fabre 1, Andrew Oldroyd 2 and Detlef Kindler 3 1. Department of
More informationRetrofitting RABS to existing aseptic filling lines
Retrofitting RABS to existing aseptic filling lines Clive Brading Associate Vice-President, Global Manufacturing Quality Operations Sanofi 7 th October 2015 The challenge How can the industry adapt existing
More informationCarrier Gases in Capillary GC
Carrier Gases in Capillary GC LC Columns and Consumables Mark Sinnott Application Engineer January 15, 2009 CARRIER GAS Mobile Phase Carries the solutes down the column Selection and velocity influences
More informationFINE ARTS Institutional (ILO), Program (PLO), and Course (SLO) Alignment
FINE ARTS Institutional (ILO), Program (PLO), and Course (SLO) Program: Dance Number of Courses: 32 Date Updated: 12.15.2014 Submitted by: V. Palacios, ext. 3535 ILOs SLO-PLO-ILO ALIGNMENT NOTES: 1. Critical
More informationThe model of thermal response of Liquefied Petroleum Gas Tanks subjected to accidental heat input
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of the RID Committee of Experts and the Working Party on the Transport of Dangerous
More informationP R I M A X. The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER THE ULTIMATE SHORING TECHNIQUES ARE NOW ON YOUR HANDS
P R I M A X The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER SLIDE RAIL SHORING ENGINEERING SLIDING STRUT SHORING TRENCH SHIELD SELF PROPELLED SHIELD CONSULTING SHORING DESIGN MANHOLE
More informationRichard S. Marken The RAND Corporation
Fielder s Choice: A Unified Theory of Catching Fly Balls Richard S. Marken The RAND Corporation February 11, 2002 Mailing Address: 1700 Main Street Santa Monica, CA 90407-2138 Phone: 310 393-0411 ext 7971
More informationCASTLE CREEK CORRIDOR PLANNING PUBLIC OPEN HOUSE
CASTLE CREEK CORRIDOR PLANNING PUBLIC OPEN HOUSE Wednesday, November 15, 2017 AGENDA Project Background and Today s Goals Corridor Constraints and Conflicts Usage Information Public Process Schedule Review
More informationComplex movement patterns of a bipedal walk
1 Complex movement patterns of a bipedal walk Objectives After completing this lesson, you will be able to: Describe the complex movement patterns of a bipedal walk. Describe the biomechanics of walking
More informationRe: ENSC 440 Functional Specification for the Wall Climbing Robot. Dear Mr. Leung,
Patrick Leung School of Engineering Science Simon Fraser University 8888 University Drive Burnaby, BC. V5A 1S6 Date 2/18/08 Re: ENSC 440 Functional Specification for the Wall Climbing Robot Dear Mr. Leung,
More informationAuthor s Name Name of the Paper Session. Positioning Committee. Marine Technology Society. DYNAMIC POSITIONING CONFERENCE September 18-19, 2001
Author s Name Name of the Paper Session PDynamic Positioning Committee Marine Technology Society DYNAMIC POSITIONING CONFERENCE September 18-19, 2001 POWER PLANT SESSION A New Concept for Fuel Tight DP
More informationAppendix E-2: Microsimulation Report
Appendix E-2: Microsimulation Report London Bus Rapid Transit Transit Project Assessment Process Environmental Project Report DRAFT April 2018 P R E PA R E D BY LONDON BUS RAPID TRANSIT PROJECT TRAFFIC
More informationWAVE MECHANICS FOR OCEAN ENGINEERING
Elsevier Oceanography Series, 64 WAVE MECHANICS FOR OCEAN ENGINEERING P. Boccotti Faculty of Engineering University of Reggio-Calabria Feo di Vito 1-89060 Reggio-Calabria Italy 2000 ELSEVIER Amsterdam
More informationKIWI HOOPS PROGRAMME PLAYER BASKETBALL NEW ZEALAND KIWI HOOPS PROGRAMME GUIDE.
PLAYER PLAYER KIWI HOOPS PROGRAMME www.basketball.org.nz GUIDE TO THE KIWI HOOPS PROGRAMME CONTENTS Welcome 3 Programme Goals 3 Junior Basketball The State Of Play 4 Rationale For Change 4 The Kiwi Hoops
More informationSWIFT. The Stratospheric Wind Interferometer for Transport Studies
The Stratospheric Wind Interferometer for Transport Studies SWIFT I. McDade, C. Haley, J. Drummond, K. Strong, B. Solheim, T. Shepherd, Y. Rochon, and the SWIFT Team ESA What is SWIFT? SWIFT is the Stratospheric
More informationNew Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications
19 th World Conference on Non-Destructive Testing 2016 New Highly Productive Phased Array Ultrasonic Testing Machine for Aluminium Plates for Aircraft Applications Christoph HENKEL 1, Markus SPERL 1, Walter
More informationIncreased Project Bankability : Thailand's First Ground-Based LiDAR Wind Measurement Campaign
Increased Project Bankability : Thailand's First Ground-Based LiDAR Wind Measurement Campaign Authors: Velmurugan. k, Durga Bhavani, Ram kumar. B, Karim Fahssis As wind turbines size continue to grow with
More informationRoundabout Design 101: Principles, Process, and Documentation
Design 101: Principles, Process, and Documentation Part 1 March 7, 2012 Well designed roundabouts should minimize accidents, delay and costs for everyone using the intersection. This session covers the
More informationQUALITYGOLFSTATS, LLC. Golf s Modern Ball Flight Laws
QUALITYGOLFSTATS, LLC Golf s Modern Ball Flight Laws Todd M. Kos 5/29/2017 /2017 This document reviews the current ball flight laws of golf and discusses an updated and modern version derived from new
More informationMU043D: Mechanical Seals
MU043D: Mechanical Seals Jun 26 28, 2018 / Dubai MU043 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This is an intensive, highly practical and useful five-day course. The participant will
More informationSingle slide rail system Linear shoring
E+S Trench shoring systems / Sliding rail systems Single slide rail system Linear shoring Single-rail linear shoring with U-type and rectangular roller unit Module length Length slide rail Panel height
More informationPREDICTING TEXTURE DEFICIENCY IN PAVEMENT MANAGEMENT PREDICTING TEXTURE DEFICIENCY IN PAVEMENT MANAGEMENT
PREDICTING TEXTURE DEFICIENCY IN PAVEMENT MANAGEMENT Sean Rainsford Chris Parkman MWH NZ Ltd Transit New Zealand PREDICTING TEXTURE DEFICIENCY IN PAVEMENT MANAGEMENT Inadequate texture is one of the key
More informationTable of Contents. Career Overview... 4
Table of Contents Career Overview.................................................. 4 Basic Lesson Plans Activity 1 Measuring... 6 Activity 2 Accuracy and Precision.... 14 Activity 3 Measurement Devices....
More informationRP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
More informationMoving beyond BACI: What do to when science and reality clash in marine reserve monitoring? Workshop Held: June 10 th, 2015
Moving beyond BACI: What do to when science and reality clash in marine reserve monitoring? Workshop Held: June 10 th, 2015 Challenges have arisen when implementing a BACI (Before-After-Control-Impact)
More informationAnalysis of Shear Lag in Steel Angle Connectors
University of New Hampshire University of New Hampshire Scholars' Repository Honors Theses and Capstones Student Scholarship Spring 2013 Analysis of Shear Lag in Steel Angle Connectors Benjamin Sawyer
More informationComputer Simulation Helps Improve Vertical Column Induced Gas Flotation (IGF) System
JOURNAL ARTICLES BY FLUENT SOFTWARE USERS JA187 Computer Simulation Helps Improve Vertical Column Induced Gas Flotation (IGF) System Computer simulation has helped NATCO engineers make dramatic improvements
More informationOverview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
More informationMETHODOLOGY. Signalized Intersection Average Control Delay (sec/veh)
Chapter 5 Traffic Analysis 5.1 SUMMARY US /West 6 th Street assumes a unique role in the Lawrence Douglas County transportation system. This principal arterial street currently conveys commuter traffic
More informationAPPENDIX I TRANSIT TRAVEL TIME SAVINGS
APPENDIX I TRANSIT TRAVEL TIME SAVINGS McCORMICK RANKIN CORPORATION 1145 Hunt Club Road, suite 300 Ottawa, Ontario, K1V 0Y3 Tel: (613)736-7200 Fax: (613) 736-8710 E-mail: mrc@mrc.ca Website: www.mrc.ca
More informationCOEFFICIENT OF DISCHARGE OF CHIMNEY WEIR UNDER FREE AND SUBMERGED FLOW CONDITIONS
COEFFICIENT OF DISCHARGE OF CHIMNEY WEIR UNDER FREE AND SUBMERGED FLOW CONDITIONS Hanaa A.M.Hayawi Amal A.G.Yahya Ghania A.M.Hayawi College Of Engineering University Of Mosul Abstract: The main objective
More informationDistributed Control Systems
Unit 41: Unit code Distributed Control Systems M/615/1509 Unit level 5 Credit value 15 Introduction With increased complexity and greater emphasis on cost control and environmental issues, the efficient
More informationMonroe County Department of Transportation Vertical Curve Safety Study
Monroe County, New York PREPARED FOR: Monroe County Department of Transportation 50 West Main Street Suite 6100 Rochester, NY 14614 PREPARED BY: 255 East Avenue Rochester, New York 14604 project # 434934
More informationLinear Compressor Discharge Manifold Design For High Thermal Efficiency
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2016 Linear Compressor Discharge Manifold Design For High Thermal Efficiency Dietmar E.
More informationENGG1960: Introduction to Biomedical Engineering Lectorial Week 12 Solution
ENGG1960: Introduction to Biomedical Engineering Lectorial Week 12 Solution Linear Fits and Tolerances As a junior biomedical engineer, you are required to work out the necessary limits of size for a simplified
More informationCHAPTER 2: FOOTBALL TRAINING AND PERIODIZATION APPROACHES... 25
CONTENTS Coach Profile: Juan Luis Delgado Bordonau Phd... 9 Coach Profile: José Alberto Mendez Villanueva Phd...10 Coach Profile: Vitor Frade "The Father of "...11 Foreword by Eddie Jones (England Rugby
More informationComparison of flow models
Comparison of flow models Rémi Gandoin (remga@dongenergy.dk) March 21st, 2011 Agenda 1. Presentation of DONG Energy 2. Today's presentation 1. Introduction 2. Purpose 3. Methods 4. Results 3. Discussion
More informationOptimization of rotor profiles for energy efficiency by using chamber-based screw model
Optimization of rotor profiles for energy efficiency by using chamber-based screw model Dipl.-Ing. Sven Herlemann, Dr.-Ing. Jan Hauser, Dipl.-Ing. Norbert Henning, GHH RAND Schraubenkompressoren GmbH,
More informationNAMC. About. Material Description. Discovering More. Red Rods
About Red Rods Red Rods Teacher demonstrates comparing a rod against other rods This most important set of blocks will have its principal application in arithmetic, as we shall see. With it, one may count
More informationPHIL 121: Methods of Reasoning Fall 2016 Course Schedule
There are very few fixed "due dates" in this course (except for when the Concept Checks are due see the below for due dates on Concept Checks), because this course is designed to let you go at your own
More informationSEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment
Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,
More informationSmoke and heat Ventilator Testing
Instituut vir Termodinamika en Meganika Institute for Thermodynamics and Mechanics Smoke and heat Ventilator Testing by CJ Zietsman and GR Smith November 2005 Departement Meganiese Ingenieurswese Privaat
More informationWindProspector TM Lockheed Martin Corporation
WindProspector TM www.lockheedmartin.com/windprospector 2013 Lockheed Martin Corporation WindProspector Unparalleled Wind Resource Assessment Industry Challenge Wind resource assessment meteorologists
More informationScrew Machine Attachments. Cutoff Tooling
2017 Cutoff Tooling About BME.. BME is a Screw Machine Rebuilder and Custom tooling supplier located in southeast Michigan. We pride ourselves on our quality of work and exceeding our customer s expectations.
More informationINTRODUCTION TO PATTERN RECOGNITION
INTRODUCTION TO PATTERN RECOGNITION 3 Introduction Our ability to recognize a face, to understand spoken words, to read handwritten characters all these abilities belong to the complex processes of pattern
More informationMEETING Agenda. Introductions. Project Overview. Key Study Components. Alternative Station Concepts. Preferred Station Concept. Next Steps.
City GARLAND Council ROADVISION Briefing STUDY VISION STUDY Dallas, TX April 8, 2010 1 1 MEETING Agenda Introductions Project Overview Key Study Components Alternative Station Concepts Preferred Station
More informationA Pyramid of Crunchkins
Pictured below you will see Nestle Crunchkins stacked in a triangular pyramid. Each layer is in the shape of an equilateral triangle, and the top layer is a single Nestle Crunchkin. How many Nestle Crunchkins
More informationOrthometric Height Determination Using GPS in East Antarctica
Tenth Indian Expedition to Antarctica, Scientific Report, 1995 Department of Ocean Development, Technical Publication No. 8, pp. 145-150 Orthometric Height Determination Using GPS in East Antarctica V.
More informationINDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Alignment
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Program: Construction Technology Number of Courses: 22 Date Updated: 09.18.2014 Submitted by: SueEllen Warren, ext. 4519 Renee
More informationStanding Committee on Policy and Strategic Priorities
POLICY REPORT Report Date: January 15, 2019 Contact: Steve Brown Contact No.: 604.873.9733 RTS No.: 12955 VanRIMS No.: 08-2000-20 Meeting Date: January 30, 2019 TO: FROM: SUBJECT: Standing Committee on
More informationCuisenaire Rods. A Guide to Teaching Strategies, Activities, and Ideas
Cuisenaire Rods A Guide to Teaching Strategies, Activities, and Ideas INTRODUCTION This Learning About Cuisenaire Rods Activity Guide provides handson activities and ideas for leading students in an active
More informationNSTA Web Seminar: How to Maximize Your NSTA Conference Experience
LIVE INTERACTIVE LEARNING @ YOUR DESKTOP NSTA Web Seminar: How to Maximize Your NSTA Conference Experience Tuesday, March 3, 2009 Goal of this Web Seminar To provide tips on how to make the NSTA National
More informationCS 7641 A (Machine Learning) Sethuraman K, Parameswaran Raman, Vijay Ramakrishnan
CS 7641 A (Machine Learning) Sethuraman K, Parameswaran Raman, Vijay Ramakrishnan Scenario 1: Team 1 scored 200 runs from their 50 overs, and then Team 2 reaches 146 for the loss of two wickets from their
More informationResults and conclusions of a floating Lidar offshore test
Results and conclusions of a floating Lidar offshore test J. Gottschall, G. Wolken-Möhlmann, Th. Viergutz, B. Lange [Fraunhofer IWES Wind Lidar Buoy next to FINO1 met. mast] EERA DeepWind'2014 Conference,
More informationAdditional On-base Worth 3x Additional Slugging?
Additional On-base Worth 3x Additional Slugging? Mark Pankin SABR 36 July 1, 2006 Seattle, Washington Notes provide additional information and were reminders during the presentation. They are not supposed
More informationPlease be sure to save a copy of this activity to your computer!
Thank you for your purchase Please be sure to save a copy of this activity to your computer! This activity is copyrighted by AIMS Education Foundation. All rights reserved. No part of this work may be
More informationExperimental Determination of Temperature and Pressure Profile of Oil Film of Elliptical Journal Bearing
International Journal of Advanced Mechanical Engineering. ISSN 2250-3234 Volume 4, Number 5 (2014), pp. 469-474 Research India Publications http://www.ripublication.com Experimental Determination of Temperature
More informationAn exploration of how the height of a rebound is related to the height a ball is dropped from. An exploration of the elasticity of rubber balls.
BOUNCE! (1 Hour) Addresses NGSS Level of Difficulty: 2 Grade Range: 3-5 OVERVIEW In this activity, students drop rubber balls in order to observe and measure the effects of elasticity. They use graphs
More informationCOURSE SLO REPORT - FINE ARTS DIVISION
COURSE SLO REPORT - FINE ARTS DIVISION COURSE SLO STATEMENTS - E 101 103 105 110 120A 120B Dance Appreciation History of Dance in the 20th Century Music for Dance Beginning Dance Ballet I Ballet Technique
More informationMaywood Town Hall Meeting. May 4, 2016
Maywood Town Hall Meeting May 4, 2016 1 AGENDA Overall I-290 Study Background Maywood Advisory Working Group (AWG) findings to date Noise Wall Update Next Steps 2 Questions? Study team members also available
More informationWind Projects: Optimizing Site Selection
Wind Projects: Optimizing Site Selection ECOWAS Regional Workshop on Wind Energy Babul Patel, Principal Alain Rosier, Vice President Nexant, Inc. Praia, Cape Verde November 4-5, 2013 Basic Criteria for
More informationTechnical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
More informationChapter V TRAFFIC CONTROLS. Tewodros N.
Chapter V TRAFFIC CONTROLS www.tnigatu.wordpress.com tedynihe@gmail.com Lecture Overview Traffic markings Longitudinal markings Transverse markings Object markers and delineator Traffic signs Regulatory
More informationOlive Oil Award Zurich 2018
Status November 2017 - Subject to change - Design: ZHAW LSFM - ILGI - Sensory Group Olive Oil Award Zurich Regulations Art. 1 Eligibility Those eligible to take part are: Producers Importers Retailers
More informationBasketball data science
Basketball data science University of Brescia, Italy Vienna, April 13, 2018 paola.zuccolotto@unibs.it marica.manisera@unibs.it BDSports, a network of people interested in Sports Analytics http://bodai.unibs.it/bdsports/
More informationindd indd
122 Safety silencers 3 124-125 introduction 126-127 overview of our products 128-129 dimensioning guidelines 130-131 sizes 1/8 1/2 132-133 sizes 1 2 134-135 special silencers, accessories 136-137 applications
More informationInternational Journal of Technical Research and Applications e-issn: , Volume 4, Issue 3 (May-June, 2016), PP.
DESIGN AND ANALYSIS OF FEED CHECK VALVE AS CONTROL VALVE USING CFD SOFTWARE R.Nikhil M.Tech Student Industrial & Production Engineering National Institute of Engineering Mysuru, Karnataka, India -570008
More informationAvailable online at ScienceDirect. Procedia Engineering 112 (2015 )
Available online at www.sciencedirect.com ciencedirect Procedia ngineering 112 (2015 ) 443 448 7th Asia-Pacific Congress on ports Technology, APCT 2015 Kinematics of arm joint motions in basketball shooting
More informationGoodyear Safety Research Project 2008 Presentation by Competitive Measure at the FEI Eventing Safety Forum. Presented by Tim Deans and Martin Herbert
Goodyear Safety Research Project 2008 Presentation by Competitive Measure at the FEI Eventing Safety Forum Presented by Tim Deans and Martin Herbert The presentation discusses the Goodyear Safety Research
More informationIMU-Step. Dashboard Summary I Measure U Limited
IMU-Step Dashboard Summary 9.53 g Impact Load Analysis 2018 I Measure U Limited Contents 1 Introduction 3 2 Step View Summary 4 2.1 Accumulative Bone Load 5 2.2 Footnotes 6 2.3 Comparing Sessions 6 3 Asymmetry
More informationPerformance Indicators (examples) Responds correctly to questions about own name, sex and age
The Scholastic Early Childhood Program correlated to the Section 1: Speech and Language Development Language Development Communication Receptive Language Listens with understanding and interest to conversations,
More informationMaking the Move: Transitioning your team from 6.0 to IJS
Making the Move: Transitioning your team from 6.0 to IJS 2010 U.S. Figure Skating Synchronized Skating National Coaches College Presented by Karin Sherr and Jeanette Davey Overview Why make the move? What
More information