Single slide rail system Linear shoring
|
|
- Kelley Adams
- 6 years ago
- Views:
Transcription
1 E+S Trench shoring systems / Sliding rail systems Single slide rail system Linear shoring Single-rail linear shoring with U-type and rectangular roller unit Module length Length slide rail Panel height Pipe culvert height 2,13 m - 6,38 m m 1,32 m / 2,32 m variable Linear shoring - no comparison With Linear shoring the soil on either side of the trench remains untouched, while there are no adverse effects on building foundations, not even if they are in the immediate vicinity of the excavation. No impairment of traffic flow, not even it if is moving right alongside the trench. Until the invention of Linear shoring such feats were considered unattainable. Linear shoring combines tried-and-tested functional principles with unconventional, innovative ideas to create a revolutionary new shoring system. A feature of the Linear shoring system is the replacement of the permanently positioned hinged spreaders, due to the ingeneous use of rigid boogie cars that act on the shoring panels in such way that the trench width is completely uniform troughout all stages of the installation. Vertically mobile, horizontally adjustable. The boogie cars mounted in the supports of the shoring system can be adjusted in height to match the increasing depth of the trench. The width of the frame is adapted by the spreader system to the desired trench width. A right to right angles. The mobile frame accurately ensures right angles in the trench. Everything is linearly aligned, always at exactly the same distance from the opposite side. In all phases of construction. That is the key to success. Because this means you can work more efficiently, faster and to a higher standard of quality whilst at the same time cutting costs appreciably. E+S Trench shoring systems / Sliding rail systems 1
2 I Linear shoring support l c Pipe culvert length II Boogie car b Shoring / trench width III Base panel b c Inner width IV Top panel h c Pipe culvert height l M Module length t pl Thickness Single-rail linear shoring with U-type or rectangular roller unit (All dimensions in mm. The details of length of pipe opening l c refer to the rectangular roller unit.) 2 E+S Trench shoring systems / Sliding rail systems
3 Linear shoring support Linear shoring support, single slide rail 715,0 Linear shoring boogie car Rectangular roller unit Linear shoring U-type boogie car 2,00 2,00 420,0 550,0 Base panels -inside- (height 2.32 m) l M [m] 2,13 2,84 5,13 6,38 t p 516,0 650,0 730,0 840,0 965, , , ,0 6,03 7,05 8,44 9,02 9,58 11,34 14,22 176,00 90,00 65,50 45,20 39,40 81,00 58,10 36,60 Top panels -inside- (height 1.32 m) l M [m] 2,13 2,84 5,13 6,38 t p 355,0 445,0 500,0 570,0 635,0 870, , ,0 2,49 3,43 4,01 4,80 5,13 5,45 6,45 8,09 176,00 90,00 65,50 45,20 39,40 81,00 58,10 36,60 Top panels -inside- (height 2.30 m) l M [m] t p , , Base panels -inside- with injection pipe (height 2.32 m) l M [m] t p A A Top panels -inside- with injection pipe (height 1.32 m) l M [m] t p (The details of length of pipe opening l c refer to the rectangular roller unit.) 530,0 660,0 740,0 845,0 975, ,0 810,0 890,0 980,0 572,0 670,0 4,35 5,98 6,99 8,37 8,95 9,50 7,05 8,44 9,02 4,01 4,80 176,00 90,00 65,50 45,20 39,40 81,00 63,00 43,50 43,90 63,00 43,50 E+S Trench shoring systems / Sliding rail systems 3
4 Combinations of height The shoring wall height can be adapted to the necessary trench depth with different panel combinations. Please note that, up to the maximum height, reduced shoring depths can be obtained by overlapping the inner and outer panels. Extension bars for rectangular roller unit ,140 0,275 0,350 0,375 0,412 0,550 1,100 1,650 2,200 3,300 4,400 38,0 50,0 55,0 57,0 60,0 70,0 110,0 152,0 192,0 278,0 358,0 Extension bars for U-type roller unit l l M l c b b c t pl Length Module length Pipe culvert length Shoring / trench width Inner width Thickness A G G / VP d eh Area Weight Weight per shoring panel Diameter Earth pressure max. 0,140 0,275 0,375 0,550 1,100 1,650 2,200 77,0 95,0 115,0 130,0 207,0 286,0 362,0 4 E+S Trench shoring systems / Sliding rail systems
5 Trench widths Length extension bar [m] without extension bar 0,140 0,275 0,350 0,375 0,412 0,550 1,100 1,650 2,200 3,300 4,400 b c [m] 0,900 1,040 1,175 1,250 1,275 1,312 1,450 2,000 2,550 3,100 4,200 5,300 b [m] 1,280 1,420 1,555 1,630 1,655 1,692 1,830 2,380 2,930 3,480 4,580 5,680 Other trench widths possible by combining different extension bar lengths. Larger trench widths available on request. Accessories / Spares IA 0150F IA 0210F IB 0470F IB 0614F HE 0050 F HE 0060F Adapter for DKU piling frame, corner shoring, h = 0.50 m KDIV Adapter for DKU piling frame, corner shoring, h = 0.50 m KDVI Adapter for DKU piling frame, corner shoring, h = 1.00 m KDVI Adapter for DKU piling frame, h = 0.50 m KDVI (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDIV (single slide rail, Adapter for DKU piling frame, h = 1.00 m KDVI (single slide rail) Adapter for EGS / DGS (LV) Bearing claw for DKU piling frame element Connector Cover panel for in-situ concrete DG -base panel- Cover plate for in-situ concrete DG -top plate- DKU piling frame guide frame DKU piling frame guide frame Nut M 24 Nut M 36 Pin Pin (for connector) Pin for roller unit (deep Linear shoring) Pin, Linear shoring (double slide rail) Pin, Linear shoring (single slide rail) Pressure beam (boxes, slide rail) Pressure beam (boxes, slide rail) Pressure plate for boogie car Pull adapter double slide rail Pull adapter single slide rail Screw M 24 x 80 Screw M 36 x 80 Spring cotter 6 mm Spring cotter 8 mm 0,750 1,000 2,27 3, ,300 0,300 4,60 5,80 1,60 2,35 2,80 3,40 47,0 55,0 94,0 45,0 40,0 75,5 105,0 40,0 6,9 7,9 9,9 105,0 175,0 0,1 0,4 1,4 0,8 4,6 3,2 2,5 425,0 525,0 175,5 236,0 271,0 318,0 12,4 43,6 30,8 0,4 1,0 0,03 0,1 d [m] 0,035 0,035 0,05 0,04 0,006 0,008 Standard DIN 934 DIN 934 DIN 933 DIN 933 DIN DIN E+S Trench shoring systems / Sliding rail systems 5
6 Accessories / Spares (contd.) Suspension chain KL-13-8 Waling for DKU piling frame, module length 2.84 m (single slide rail, Waling for DKU piling frame, module length 3.88 m (single slide rail, Waling for DKU piling frame, module length 4.13 m (single slide rail, Waling for DKU piling frame, module length 4.38 m (single slide rail, 5,000 25,7 300,0 402,0 420,0 445,0 d [m] Standard l l M l c b b c t pl Length Module length Pipe culvert length Shoring / trench width Inner width Thickness A G G / VP d eh Area Weight Weight per shoring panel Diameter Earth pressure max. The details of length of pipe opening l c refer to the rectangular roller unit. 6 E+S Trench shoring systems / Sliding rail systems
Deep Linear shoring. E+S Trench shoring systems / Sliding rail systems. Deep Linear shoring
E+S Trench shoring systems / Sliding rail systems Deep Linear shoring Deep Linear shoring Module length Length slide rail Panel height Pipe culvert height m - m variabel 1,32 m / 2,32 m variabel The deep
More informationUniversal DKU piling frame element
Shoring length Height sheet pile element Pipe culvert length Application depth 2,27 m / 3,81 m 1,00 m max. 3,35 m variable The universal shoring method The DKU piling frame element is a low-deformation,
More informationKS 100. Krings Trench shoring systems / Endsupported compact shoring systems KS 100
Krings Trench shoring systems / Endsupported compact shoring systems KS 100 KS 100 Shoring ength Height ase unit Height top unit Pipe cuvert height Weight m 4,50 m m / m m max. m 1399 kg 2715 kg The KS
More informationProduct Range Trench Shoring.
Materials Services Infrastructure Product Range Trench Shoring. Shoring systems from Emunds+Staudinger KRINGS. 2 Contents Contents 04 10 E+S trench shoring systems KRINGS trench shoring systems 04 Linear
More informationThyssenKrupp Bauservice
Global specialist for trench shoring systems Agenda 1. The company 2. Security in and around the trench 3. Evolution of trench shoring 4. E+S linear shoring system 5. Product development Deep linear shoring
More informationInstructions for use. Edge-supported shoring units Krings.
. Instructions for use Edgesupported shoring units Krings www.esverau.com Tale of contents System overview...3 Occupational safety and general remarks according to DIN EN 133311/2...5 Technical data sheet
More informationInstructions for use. Edge-supported shoring units E+S.
Instructions for use Edgesupported shoring units E+S wwwesveraucom Tale of contents System overview3 Occupational safety and general remarks according to DIN EN 133311/25 Technical data sheet edgesupported
More informationP R I M A X. The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER THE ULTIMATE SHORING TECHNIQUES ARE NOW ON YOUR HANDS
P R I M A X The Most Advanced Shoring Devices SAFER - FASTER - DEEPER - CHEAPER SLIDE RAIL SHORING ENGINEERING SLIDING STRUT SHORING TRENCH SHIELD SELF PROPELLED SHIELD CONSULTING SHORING DESIGN MANHOLE
More informationASSEMBLY AND OPERATING MANUAL LTW MAXI TRENCH BOX
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationASSEMBLY AND OPERATING MANUAL LTW SHORING BOXES VB 100 & VB 120
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationASSEMBLY AND OPERATING MANUAL LTW SHORING BOXES VB 60
Manufacturer: LTW Tiefbauvertriebs GmbH Holter Weg 11 D 41836 Hückelhoven-Brachelen Phone: +49 (0) 24 62 / 2009 0 Fax: +49 (0) 24 62 / 2009 15 e-mail: info@ ltw-verbau.de homepage: http:\ \ www.ltw-shoring.com
More informationOPERATING MANUAL. SINGLE SLIDE RAIL RS Series 790
OPERATING MANUAL SINGLE SLIDE RAIL RS Series 790 Manufacturer: SBH Tiefbautechnik GmbH Ferdinand-Porsche-Str. 8 D 52525 HEINSBERG Phone: +49 (0) 24 52 / 91 04 0 Fax: +49 (0) 24 52 / 91 04 50 E-mail: info@sbh-tiefbautechnik.com
More informationAluminum Sheeting Guide (ASG)
Tabulated Data Aluminum Sheeting Guide (ASG) February 2016 Copyright, U.S.A.,Griswold Machine & Eng., 2016 594 Mendon Road, Union City, MI 49094 (800) 248 2054 Fax: (517) 741 7483 CAUTION EXCAVATION PROCEDURES
More informationGATE INSTALLATION INSTRUCTIONS
For Technical Support: 1-877-862-7049 GATE INSTALLATION INSTRUCTIONS What You Need: Posthole digger 4 long, 2 diameter galvanized pipe For Loose Soil 3 additional 3 long, 2 diameter galvanized pipe Level,
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More information"STEEL FRAMED" ALUMINUM PANEL SHIELDS
"STEEL FRAMED" ALUMINUM PANEL SHIELDS MANUFACTURE S TABULATED DATA 3330 S. Sam Houston Pkwy Houston, Texas 77047 (713)943-0750 USA Toll Free 1-800-231-6662 Fax (713)943-8483 Www.speedshore.com PRINTED
More informationUSER MANUAL. Beach volleyball posts BEACH CHAMP ID:
USER MANUAL Beach volleyball posts BEACH CHAMP ID: 111203 INDEX USER MANUAL FOR BEACH VOLLEYBALL POSTS BEACH CHAMP General information Overview Overview: Floor mounting options City Beach - for a freestanding
More informationITEM 400 STRUCTURAL EXCAVATION AND BACKFILL
AFTER MARCH 1, 2012 ITEM 400 STRUCTURAL EXCAVATION AND BACKFILL 400.1 Description. This item shall govern for all excavation required for the construction of all structures, except pipe or box sewers for
More informationSPEED SHORE MANUFACTURER S TABULATED DATA "MHS" MODELS. STEEL MANHOLE SHIELDS 4 Single Wall 4 Double Wall 4 Double Wall with Cut-Outs
SPEED SHORE MANUFACTURER S TABULATED DATA "MHS" MODELS STEEL MANHOLE SHIELDS 4 Single Wall 4 Double Wall 4 Double Wall with Cut-Outs January 01, 2005 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Tel:
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationSPOOLER INSTRUCTIONS. STEP 12 If you are going to paint your posts, that should be done at this time.
STEP 4 Starting where you marked the end post location, move down your fence line 6 feet and make another mark. This mark is where your second upright post will be installed. Continuing down the fence
More informationRiver Bridge - Test Shaft-1 Clarke County, MS, 4/2/2012
Page 1 of 9 The enclosed report contains the data and analysis summary for the SoniCaliper shaft caliper, performed at River Bridge (Test Shaft-1), Clarke County, MS on Monday, April 02, 2012 by Dave Jakstis.
More informationROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More informationSTEEL TRENCH SHIELDS DW MODELS
STEEL TRENCH SHIELDS DW MODELS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 COPYRIGHT, U.S.A., SPEED SHORE CORPORATION, 2009 April 16,
More informationbuilt build to TRENCHLINING DOWN A CAISSON
uilt build to TRENCHLINING DOWN A CAISSON TRENCHLINING Trenchlining_DOWN A CAISSON DOWN A CAISSON CHARACTERISTICS Base panel 315x230 (815 kg) and 415x230 (1018 kg). Super-elevation panel 315x120 (511
More informationTrench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against
More informationProduct Information Bulletin
Product Information Bulletin BULLETIN NO. ISSUED: REPLACES: 207 July 18, 2011 December 31, 2007 NBC 2005 and 2010, Part 9 - Prescriptive Requirements for ICF Construction Page 2 of 5 The National Building
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationNEXT GENERATION FLEX FENCE
NEXT GENERATION FLEX FENCE Area To Be Fenced.. With Next Generation Flex Fence any post that is not in a straight line with another post must be braced. Layout your fence installation. Determine all end
More informationAssembly and measurements of a mechanical prototype of the BIS MDT chamber
ATLAS Internal Note MUON NO 243 9 June 1998 Assembly and measurements of a mechanical prototype of the BIS MDT chamber K. Ekonomou Physics Department, Aristotle University of Thessaloniki, Thessaloniki,
More informationSPECIAL LAUNCHING METHODS
CHAPTER 18 SPECIAL LAUNCHING METHODS Special launching methods are needed when a restricted site prevents normal roller layout and launching by the standard skeleton launchingnose method. Space on either
More informationINSTRUCTIONS. for installing ALDON Two-Way LOCOMOTIVE Hinged Derail on wooden ties. For 4-Axle and 6-Axle Locomotives and all Freight Cars
INSTRUCTIONS for installing ALDON Two-Way LOCOMOTIVE Hinged Derail on wooden ties For 4-Axle and 6-Axle Locomotives and all Freight Cars Manual Lift Sign Holder 4014-18-5-D size 5 4014-18-6-D size 6 4014-18-7-D
More informationProduct Catalog and Pricing
2015 Prices effective December 1, 201 www.greenebinstairs.com Product Catalog and Pricing 177 Main Street; PO Box 191 All Galvanized Material East Lynn IL 60932 F.O.B. East Lynn IL 60932 217-375-2; FAX
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationSTEEL TRENCH SHIELDS TUFF-LITE MODELS
STEEL TRENCH SHIELDS TUFF-LITE MODELS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 April 16, 2009 TRENCH SHIELDS TUFF-LITE TM Page 2 of
More informationBike holder with three-point-support for mounting stand
Bike holder with three-point-support for mounting stand Ref.no. 589 4726 Translation of the original manual Issued: 07 / 2010 Keep this manual for future reference! Manufacturer: Weilnhammer Maschinenbau
More informationicreasepro Creaser Operators Manual
6-2013 Version 3.0 icreasepro Creaser Operators Manual WWW.MBMCORP.COM 800-223-2508 TABLE OF CONTENTS SPECIFICATIONS.1a SAFETY PROCEDURES/CARE & MAINTENANCE..1b COMPONENT IDENTIFICATION 2 TOUCH SCREEN
More informationViega Advantix Vario. Millimetre precision. Unlimited flexibility.
Viega Advantix Vario Millimetre precision. Unlimited flexibility. Viega Advantix Vario Individuality in its most beautiful form. Demanding design and high-quality materials have long since been par for
More informationSI-F971A. 9-speed super narrow chain such as CN-7700 / CN-HG92 8- / 7- / 6-speed narrow chain such as CN-HG50 / CN-IG51
SERVICE INSTRUCTIONS SI-F971A Front Drive System Before use, read these instructions carefully, and follow them for correct use. WARNING Use neutral detergent to clean the chain. Do not use alkali-based
More informationData Distribution Cabinets. Exclusive CD edition March 2006
Exclusive CD edition March 2006 Introduction: The development of distribution cabinets is the practical reply from KRONE to the ever increasing demands on the data, telephone, and network technology. Cost-effective,
More informationKilnCooler Hot Spot Technical
KilnCooler Hot Spot Technical specification Hot Spot KilnCooler Hot Spot Technical controller Infrared controlled water cooling of kiln shells zzexpansion zzreduced zzalmost of kiln s operation time mechanical
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationby Master Halco ANCHOR GATE SYSTEMS Swing Gates Overhead Slide Gates Cantilever Slide Gates Vertical Lift Gates Fencing Without Boundaries.
by Master Halco ANCHOR GATE SYSTEMS Swing Gates Overhead Slide Gates Cantilever Slide Gates Vertical Lift Gates Fencing Without Boundaries. The Better Way To Build Your Cantilever Slide Gates... The Principle
More informationAdvantage Lockers & Bike
Advantage Lockers & Bike Advantage Bike Racks & Lockers Inc. is the #1 supplier of Storage Lockers and Bike Racks to the Lower Mainland s residential construction industry. With 25+ years of experience
More informationResistant and long-lasting Quick and easy to install Saving time and money. Modular pool. Swimming pools ready to enjoy.
Modular pool Resistant and long-lasting Quick and easy to install Saving time and money Swimming pools ready to enjoy www.modulopool.com 2 MODULOPOOL What is MODULOPOOL? ModuloPool is a swimming pool structure
More informationSET OF EUROLEAGUE BACKSTOP UNITS (Reference PK120)
SET OF EUROLEAGUE BACKSTOP UNITS (Reference PK120) DESCRIPTION The EUROLEAGUE backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions
More informationA Table Top Wind Tunnel You Can Build
A Table Top Wind Tunnel You Can Build Basic principles of aerodynamics can be studied in the classroom with this simple, inexpensive wind tunnel. All you need to build it is some cardboard boxes, glue,
More informationDeveloped by Engineers Alex Klinger and Shelby Vrem November 2015
TRENCH RESCUE (1.1) Developed by Engineers Alex Klinger and Shelby Vrem November 2015 TASK SKILL DESCRIPTION AND DETAILS Task: To safely and effectively rescue a patient out of a trench environment. Mode
More informationAnchor Posts. *Patent Nos: Europe USA 12/372,965 2 ANCHOR SYSTEMS ANCHOR POSTS
Anchor Post System Anchor Posts Anchor Posts are an innovative patented* system designed by our founder, Ewan Smith, for lightweight foundations using hand held equipment. Ingeniously simple, they fulfil
More informationSERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
More informationTYPES OF FOUNDATION. Superstructure. Substructure. Foundation
TYPES OF FOUNDATION Introduction: The lowest artificially built part of a structure which transmits the load of the structure to the soil lying underneath is called foundation. The supporting part of a
More informationa division of Enviro Safety Products
www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Chassis 3 4 5 3 4 6 7 8 5 0 0 6 8 0 7 4 3 5 6 7 E 7e www.minutemanvac.com, a division of Enviro Safety Products.800.637.6606 Page
More information1.5 m. 2.4 m. Fig the pressure exerted by the oil on the base of the tank, the force exerted by the oil on the base of the tank.
1 Fig. 3.1 shows an oil tank that has a rectangular base of dimensions 2.4 m by 1.5 m. oil depth of oil 1.5 m 2.4 m Fig. 3.1 1.5 m The tank is filled with oil of density 850 kg / m 3 to a depth of 1.5
More informationSide-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation
Side-of-Pole Mount for 1 Modules (SPM1) For Module Types E, F, G, & H ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A SP3348-1 PCN 022212-2 Side-of-Pole Mount for 1 Module
More informationSpecial instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805
Technical Service Instructions SI-5VB0E t RD-M805 / RD-M800 Rear derailleur Special instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805 A hub axle is an essential component for the
More informationOP CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST
Page 1 of 5 WORK INSTRUCTIONS FOR ENGINEERS NHB Compiled by : LSS Checked by : GSS Approved by : OP-3-31. CHECKLIST FOR 1D CONSOLIDATION LABORATORY TEST Page 2 of 5 31.0 CHECKLIST ITEMS *(refer to respective
More informationTECHNICAL MANUAL. COPRA Anchoring Coupler. For Smart Bolted Connections
TECHNICAL MANUAL Anchoring Coupler For Smart Bolted Connections Version: PEIKKO GROUP 03/2017 Anchoring Coupler For bolted connections Multi-purpose anchoring system for all bolted connections Simplifi
More informationTABLE OF CONTENTS PRODUCTS & INFORMATION
SHORING CATALO G TABLE OF CONTENTS PRODUCTS & INFORMATION PAGE HL SHORING FRAMES (10k/leg)...3 STEEL SHORING ACCESSORIES... 4 SHORING TOWER... 5 SHORING JACK... 6 SHORING FRAME ALLOWABLE WORKING LOADS...7
More informationPage 1 of 1 04/19/13 SBR
Office of Roadway Engineering - Plan Insert Sheets Number Title Date Number Title Date Number Title Date 201015 Extension of Anchor Bolts 07/20/12 207000 Bikeway Pavement Marking Details 01/18/13 202010
More informationSelf-Aligning Cylindrical Roller Bearings. Plummer Block Housing. Series ACB, sealed on both sides. Series SLG01
Self-Aligning Cylindrical Roller Bearings Series ACB, sealed on both sides Plummer Block Housing Series SLG01 KRW Self-Aligning Cylindrical Roller Bearings sealed on both sides ACB self-aligning cylindrical
More informationARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments
ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments
More informationRolled Rotary Ball Screw
51E Rolled Rotary Ball Screw Model BLR End cap Collar Seal Spacer Ball End cap Screw shaft Outer ring Ball screw nut Retainer Outer ring Ball Fig.1 Structure of Large Lead Rotary Nut Ball Screw Model BLR
More informationTest Report. Test Report Smart Systems Limited Incorporating Smart Extrusions. Page 1 of 78
Test Report 8365614. Smart Systems Limited Incorporating Smart Extrusions Page 1 of 78 Introduction. This report has been prepared by Adam Pearce and relates to the activity detailed below: Job/Registration
More information1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
More informationBS Conveyor Chain - Hollow Bearing Pin Chain
S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.
More informationInstallation and Training Manual
AirForce1 Tower Kit Installation and Training Manual FuturEnergy Limited Ettington Park Business Centre Stratford upon Avon CV37 8BT +44 (0)1789 451070 Table of Contents Safety Notes... 3 Parts Supplied
More information4. Guided Bus Explained
4. Guided Bus Explained Contents 1 INTRODUCTION... 2 Structure of this report... 2 2 KERB GUIDED BUS... 3 Overview... 3 Kerb guidance... 3 Figures Figure 2.1 Figure 2.2 Figure 2.3 Figure 2.4 Figure 2.5
More informationErsatzteilliste Spare parts list
VIBRO FLEX 00 Ersatzteilliste Spare parts list Liste di pièce de rechange Tab. Spare parts list / VIBRO FLEX 00. Date: 00,0 Fig. Serial no. Part no. Pieces Notes 00 Central frame 0 Frame cpl. VF 000 Frame
More informationDesigning Wave Energy Converting Device. Jaimie Minseo Lee. The Academy of Science and Technology The Woodlands College Park High School, Texas
Designing Wave Energy Converting Device Jaimie Minseo Lee The Academy of Science and Technology The Woodlands College Park High School, Texas Table of Contents Abstract... i 1.0 Introduction... 1 2.0 Test
More informationOwner s Manual Installation and Operation
Owner s Manual Installation and Operation Models: RED40-N-AU RED40ST-N-AU Ref No: GMK10107 AS4553:2008 Important operating and maintenance instructions included. NOTICE DO NOT DISCARD THIS MANUAL Read,
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationSlide 1 / What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3?
Slide 1 / 68 1 What is the density of an aluminum block with a mass of 4050 kg and volume of 1.5 m 3? Slide 2 / 68 2 What is the mass of a rectangular shaped ice block with dimensions of 0.04m x 0.05m
More informationDICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
More informationOrder No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More information2 Available: 1390/08/02 Date of returning: 1390/08/17 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditio
1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditions shown, determine. 2. A tanker truck carries water, and the cross section of the truck s tank is shown
More informationScissor Mechanisms. Figure 1 Torero Cabin Service Truck. Scissor Mechanism was chassis mounted and lifted the cabin to service aircraft
Scissor Mechanisms Scissor mechanisms are very common for lifting and stabilizing platforms. A variety of manlifts, service platforms and cargo lifts utilize this visually simple but structurally complex
More informationMETROLOGY LAB. I DEVICES BASED ON VERNIER SCALE
METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE Indirect Measurement; two balls 2 Lab6: Roundness Test 12/1/2017 Indirect Measurement; four balls 3 Lab6: Roundness Test 12/1/2017 Angle measurement using
More informationRevisions to the Regulations for Agility Trials
Revisions to the Regulations for Agility Trials Effective January 2, 2018 Equipment changes may be done prior to January 2, 2018, but must be completed by January 2, 2018 This insert is issued as a supplement
More informationMICHIGAN DEPARTMENT OF TRANSPORTATION 6" X 8" (NOMINAL POST) 3-1/2" DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
More informationTEPZZ A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION
(19) TEPZZ 55475 A_T (11) EP 2 554 752 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: 06.02.2013 Bulletin 2013/06 (21) Application number: 11176100.3 (51) Int Cl.: E02D 7/06 (2006.01) E02D
More informationInsulated Door Components. Tension Spring System. High performance hardware door system for residential applications
Insulated Door Components Tension Spring System High performance hardware door system for residential applications Tension Spring System Simple and quick suitable for door dimensions of 3500 mm x 2250
More informationCrossed Roller Bearings Series Crossed Roller Bearings Series:
Crossed Roller Bearings Series Crossed Roller Bearings Series: Proprietary 2V Grinding Technology 102 Crossed Roller Bearing Series: Overview High Precision Bearing Sets Proprietary 2V Grinding Technology
More information4 Machine maintenance and repair
3.3 lift device consists of: lift motor, lead screw, guide rod, lifting seat Lift motor Lead screw Guide rod Lifting seat Diagram 3.3 3.4 torch holder set The torch holder consist of holder connection,
More informationSPEED SHORE MANUFACTURER S TABULATED DATA MANGUARDS. October 31, 2005
SPEED SHORE MANUFACTURER S TABULATED DATA MANGUARDS October 31, 2005 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Tel: (713) 943-0750 U.S.A. Toll Free: (800) 231-6662 Fax: (713) 943-8483 COPYRIGHT,
More informationMUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
More informationPACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM. TABULATED DATA Effective August 25, 2015
1 HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM Effective August 25, 2015 PSH 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 Construction Engineering Resource 1837 Wright Street Santa Rosa, Ca. 95404
More informationSplitting cylinder C20
Splitting cylinder C20 Product abbreviation C20 HN C20 = Size of splitting cylinder N or L = Wedge set length H / V / J / C = Mounting version Purpose of application Horizontal splitting (+/- 45 to the
More informationPACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS PSH HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM. TABULATED DATA Effective December 10, 2013
1 HEAVY DUTY HYDRAULIC WALER RAIL SYSTEM Effective December 10, 2013 PSH 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 Construction Engineering Resource 1837 Wright Street Santa Rosa, Ca. 95404
More informationINSTALLATION INSTRUCTIONS
COUNTER-CURRENT SWIMMING Hurricane Turbo Swim Jet INSTALLATION INSTRUCTIONS PACKET NO.1 With a COUNTER-CURRENT SWIMMING device your swimming pool is no longer a simple man-made lake. It becomes the most
More informationBuild-A-Clock CLOCK CUSTOMIZATION INSTRUCTIONS. One Plan - One Bit, Endless Possibilities. Cut #1. Cut #4 Cut #2. Cut #5 Cut #3
#067 CLOCK CUSTOMIZATION INSTRUCTIONS The Multi-Form Bit makes every clock a one-of-a-kind heirloom Build-A-Clock One Plan - One Bit, Endless Possibilities A l t e r nate Tops Multi-Form Router Bit #177-4005
More informationAir Sensor. FCS Ex. Manual. AQ Elteknik AB
Air Sensor FCS Ex Manual AQ Elteknik AB Air Sensor Model FCS Ex Manual version 2.0 Oct 2010 AQ Elteknik AB AQ Elteknik AB Air Sensor Manual 2 Table of contents 1. Manufacturer information... 4 Manufacture
More informationThe cost-efficient fixing for flexible use in non-cracked concrete VERSIONS. zinc-plated steel stainless steel hot-dip galvanised steel
The cost-efficient fixing for flexible use in non-cracked concrete VERSIONS APPROVALS zinc-plated steel stainless steel hot-dip galvanised steel BUILDING MATERIALS Approved for: Concrete C20/25 to C50/60,
More informationOpening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º
17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000
More informationTable of Contents FIRST 2005 FIRST Robotics Competition Manual: Section 3 The Arena rev B Page 1 of 8
Table of Contents 3 THE ARENA...2 3.1 OVERVIEW...2 3.1.1 Dimensions and Tolerances...3 3.2 PLAYING FIELD...4 3.2.1 Boundaries and Markings...4 3.2.2 Goals...5 3.2.3 Center Goal...5 3.2.4 Tetra Loading
More informationStage Decks. Decks. Legs. Handrails. Trolleys. Stairs I Driveway. Tribunes. Accessories
Stage Decks Decks Legs Handrails Trolleys Stairs I Driveway Tribunes Accessories Decks 200x100cm Black Hexa anti-slip Plywood Stage of the art DECKS New deck 200x100cm is only 29 kg. Two longitudinal beams
More informationMODULAR ALUMINUM PANEL SHIELDS MAPS
MODULAR ALUMINUM PANEL SHIELDS MAPS 3330 S. SAM HOUSTON PKWY E. HOUSTON, TEXAS 77047 Phone: 713.943.0750 Toll Free: 800.231.6662 Fax: 713. 943.8483 April 16, 2009 MODULAR ALUMINUM PANEL SHIELDS Page 2
More informationGROUTEC SCOTT VICKERS. Grouting Equipment
GROUTEC SCOTT VICKERS Grouting Equipment SCOTT VICKERS manufacturers a range of cement and chemical grouting equipment including:- PUMPS - The Cement Grout Pumps are all diaphragm-type. These diaphragms,
More informationVibration isolation system 1VIS10W. User manual
Vibration isolation system 1VIS10W User manual Standa 2014 Table of contents 1. General information 3 1.1. Introduction 3 1.1.1. Safety 5 1.2. Location of the table 5 1.3. Air supply requirements 5 2.
More informationFig. 3.1 (not to scale)
1 Fig. 3.1 shows an early water-powered device used to raise a heavy load. The heavy load rests on piston B. cylinder A cylinder B water load piston A piston B connecting rod connecting rod pivot beam
More information