EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
|
|
|
- Coleen Harrington
- 6 years ago
- Views:
Transcription
1 ICC-ES Report PMG-1149 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING Report Holder: ELKHART PRODUCTS CORPORATION 1255 OAK STREET ELKHART, IN 46514
2 ICC-ES PMG Product Certificate PMG-1149 Effective Date: August 2017 This listing is subject to re-examination in one year. (800) (562) A Subsidiary of the International Code Council CSI: Division: PLUMBING Section: Domestic Water Piping Product certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier s quality system Product: Listee: Push Fit Fitting with quick assembly push fit mechanism for copper, PEX and CPVC tubing and Pipes Elkhart Products Corporation 1255 Oak Street Elkhart, IN Compliance with the following codes: 2015, 2012, 2009 and 2006 International Plumbing Code (IPC) 2015, 2012, 2009 and 2006 International Residential Code (IRC) 2015, 2012, 2009 and 2006 Uniform Plumbing Code (UPC)* 2014 and 2011 Uniform Plumbing Code - India (UPC-1)* *Copyrighted publication of the International Association of Plumbing and Mechanical Officials Compliance with the following standards: Identification: Installation: ASSE , Performance Requirements for Push-fit Fittings ICC-ES LC1009 (April 2010), PMG Listing Criteria for Push-Fit Fittings for Potable Water Tube and Radiant Heating Systems NSF/ANSI , Drinking Water Systems Components Health Effects Manufacturer's name or trademark, nominal size, tubing material for which the fitting is intended and the ICC-ES PMG certification mark must be visible after installation. NOTE: For fittings 3/4 and smaller, the tubing material can be indicated on packaging literature. The Elkhart Products Corporation push-fit fittings described in this listing must be installed in accordance with the manufacturer s published installation instructions and the applicable codes. Installation is limited to seamless rigid copper tubing complying with ASTM B 88 as well as PEX and CPVC tubing and Pipes. Prior to installation of the fitting, the end of the copper tubing must be Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright 2017 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 6
3 PMG-1149 Most Widely Accepted and Trusted Page 2 of 6 inspected to ensure that it is cut square and is not dented or oval or have flat spots. The end of the tubing must be reamed on the inside to ensure proper flow, and chamfered on the outside to remove any burrs that might damage the EPDM seal of the Elkhart Products Corporation fitting. Models: TECTITE Model No. Description Sizes Reducer Female Adapter 203-1/2x3/ Reducer Male Adapter 204-1/2x3/ Coupling w/ Stop 200-1/ Coupling w/ Stop 200-3/ Coupling w/ Stop Reducer Coupling 201-3/4x1/ Reducer Coupling 201-1x3/ Slip Coupling 201-1/ Slip Coupling 201-3/ Slip Coupling Female Adapter 203-1/ Female Adapter 203-3/ Female Adapter Male Adapter 204-1/ Male Adapter 204-3/ Male Adapter Reducer Male Adapter 204-1x3/ Deg. Elbow 207-1/ Deg. Elbow 207-3/ Deg. Elbow Deg. Reducer Elbow 207-3/4x1/ Tube Cap 217-1/ Tube Cap 217-3/ Tube Cap Coupling w/ Stop 200-1/ Coupling w/ Stop 200-3/ Coupling w/ Stop / Coupling w/ Stop /4 LL Coupling w/ Stop Deg. Elbow 207-1/ Coupling w/ Stop / Coupling w/ Stop Coupling w/ Stop /2 LL Deg. Elbow 207-3/ Deg. Elbow Deg. Elbow / Deg. Elbow ¼ Deg. Elbow Male Adapter 204-1/ Male Adapter ¼ Male Adapter ½ Male Adapter Coupling w/ Stop LL
4 PMG-1149 Most Widely Accepted and Trusted Page 3 of Male Adapter 204-3/ Deg. Street Elbow Deg. Elbow /4 LL Deg. Elbow Male Adapter Female Adapter 203-1/ Deg. Elbow /2 LL Female Adapter 203-3/ Female Adapter Female Adapter ½ Female Adapter ¼ Female Adapter Tube Cap 217-1/ Deg. Elbow LL Female Adapter /4 LL Tube Cap 217-3/ Deg. Elbow ¼ Deg. Elbow ¼ Tube Cap ¼ Tube Cap Deg. Drop Ear Elbow / Deg. Street Elbow ¼ Tube Cap ½ Female Adapter /2 LL Tube Cap Female Adapter LL Male Adapter /4 LL Male Adapter /2 LL Deg. Street Elbow ½ Reducer Coupling 201-3/4x1/ Reducer Coupling 201-1x3/ Reducer Male Adapter 204-3/4x Slip Coupling 201-1/ Slip Coupling 201-3/ Slip Coupling Male Adapter LL Deg. Elbow /4 LL Deg. Elbow /2 LL Deg. Elbow LL Deg. Street Elbow /4 LL Deg. Street Elbow /2 LL Deg. Street Elbow LL Tube Cap /4 LL Tube Cap /2 LL Tube Cap LL
5 PMG-1149 Most Widely Accepted and Trusted Page 4 of 6 QTITE Model No. Description Sizes Coupling w/ Stop 900-1/ Coupling w/ Stop 900-3/ Coupling w/ Stop Reducer Coupling 901-3/4x1/ Reducer Coupling 901-1x1/ Reducer Coupling 901-1x3/ Reducer Coupling /4x3/ Reducer Coupling /4x Reducer Coupling /2x3/ Reducer Coupling /2x Reducer Coupling /2x1 1/ Reducer Coupling 901-2x1 1/ Female Adapter 903-1/ Female Adapter 903-3/ Female Adapter Female Adapter / Female Adapter / Female Adapter Male Adapter 904-1/ Male Adapter 904-3/ Male Adapter Male Adapter / Male Adapter / Male Adapter Deg. Elbow 907-1/ Deg. Elbow 907-3/ Deg. Elbow Deg. Street Elbow / Deg. Street Elbow / Deg. Street Elbow Deg. CxM Elbow / Deg. CxM Elbow / Deg. CxM Elbow Deg. CxF Elbow / Deg. CxF Elbow / Deg. CxF Elbow Deg. Drop Ear Elbow / Deg. Elbow 906-1/ Deg. Elbow 906-3/ Deg. Elbow Deg. Elbow / Deg. Elbow / Deg. Elbow Deg. Street Elbow / Deg. Street Elbow / Deg. Street Elbow Nominal Tee 911-3/ Nominal Tee Reducer Tee 911-3/4x3/4x1/ Reducer Tee 911-1x1x1/ Reducer Tee 911-1x1x3/ Reducer Tee /4x1 1/4x1
6 PMG-1149 Most Widely Accepted and Trusted Page 5 of Reducer Tee /2x1 1/2x3/ Reducer Tee /2x1 1/2x Reducer Tee /2x1 1/2x1 1/ Reducer Tee 911-2x2x Reducer Tee 911-2x2x1 1/ Reducer Tee 911-2x2x1 1/ Reducer Tee /4x3/4x1 1/ Reducer Tee /4x1x1 1/ Reducer Tee /2x3/4x1 1/ Reducer Tee /4x3/4x3/ Reducer Tee /2x1x Tube Cap 917-1/ Tube Cap 917-3/ Tube Cap Tube Cap / Tube Cap / Tube Cap PEX Liner 1/ PEX Liner 3/ PEX Liner 1 Low Lead Models: Model No. Description Sizes CxC Coupling W/Stop 1-1/4" CxC Coupling W/Stop 1-1/2" CxC Coupling W/Stop 2" CxC 90 Deg. Elbow 1-1/4" CxC 90 Deg. Elbow 1-1/2" CxC 90 Deg. Elbow 2" CxF Adapter 1-1/4" CxF Adapter 1-1/2" CxF Adapter 2" CxM Adapter 1-1/4" CxM Adapter 1-1/2" CxM Adapter 2" CxC 45 Deg. Elbow 1-1/4" CxC 45 Deg. Elbow 1-1/2" CxC 45 Deg. Elbow 2" CxCxC Tee 1-1/4" CxCxC Tee 1-1/2" Ftg. x C 45 Deg St. Elbow 1-1/4" Ftg. x C 45 Deg St. Elbow 1-1/2" Ftg. x C 45 Deg St. Elbow 2" CxCxC Tee 1-1/4" x 1-1/4" x 1" CxCxC Tee 1-1/2" x 1-1/2" x 3/4" CxCxC Tee 1-1/2" x 1-1/2" x 1" CxCxC Tee 1-1/2" x 1-1/2" x 1-1/4" CxCxC Tee 2" x 2" x 1" CxCxC Tee 2" CxCxC Tee 2" x 2" x 1-1/4"
7 PMG-1149 Most Widely Accepted and Trusted Page 6 of 6 Conditions of Listing: CxCxC Tee 1-1/4" x 1-1/4" x 1/2" CxCxC Tee 2" x 2" x 1-1/2" CxCxC Tee 1-1/4" x 1-1/4" x 3/4" Cap 1-1/4" Cap 1-1/2" Cap 2" 1. Elkhart Products Corporation s Push-fit fittings are limited to interior, above-grade installations where the fittings are not embedded in concrete. 2. Elkhart Products Corporation s Push-fit fittings and connected tubing must not be used to support any load beyond that of the water-filled pipe and fittings. 3. The potable water distribution system utilizing the Elkhart Products Corporation s push-fit fittings must be pressure-tested and inspected in accordance with Section of the International Plumbing Code or Section P International Residential Code, as applicable. 4. The Elkhart Products Corporation s Push-fit fittings are manufactured in Elkhart and Geneva, Indiana under a quality control program with annual inspection by ICC-ES.
EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING.
ICC-ES Report PMG-1407 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder:
ICC-ES Report PMG-1256 Reissued 10/2017 This report is subject to renewal 06/2018 EVALUATION SUBJECT: PUSH FIT FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report Holder:
EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HVAC DUCTS AND CASINGS.
ICC-ES Report PMG-1171 Reissued 11/2018 This report is subject to renewal 11/2019 EVALUATION SUBJECT: UNDERGROUND SINGLE WALL & DOUBLE WALL INSULATED DUCT FOR HVAC DIRECT BURIAL APPLICATIONS AND UNDERGROUND
EVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS
ICC-ES Report ESR-1681 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING
Effective Date: May 2017 Void After: May Product: Press and Nail Connections File No. M-8332
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
CPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
Effective Date: April 2018 Void After: April 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
REPORT HOLDER: FRAMECAD LICENSING LTD. POST OFFICE BOX 1292 AUCKLAND 1140 NEW ZEALAND EVALUATION SUBJECT: COLD FORMED STEEL C SHAPES AND TRACKS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2361 Reissued 05/2017 This report is subject to renewal 05/2019. DIVISION: 05 00
Effective Date: December 2017 Void After: December 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Copper Pressure and Drainage Fittings
Copper Pressure and Drainage Fittings CPR-C0112R JANUARY 2012 SUPERSEDES CPR-0211M / FEB. 2011 COPPER PRESSURE FITTINGS C x C Coupling with Stop C x C Coupling with Stop (Reducing) Fitting x C Bushing
EVALUATION SUBJECT: FIBERGLASS ONE-PIECE SWIMMING POOL SHELLS DIVISION: SPECIAL CONSTRUCTION SECTION: BELOW-GRADE SWIMMING POOLS
ICC-ES Report ESR-3868 Reissued 10/10/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: FIBERGLASS ONE-PIECE SWIMMING POOL SHELLS DIVISION: 13 00 00 SPECIAL CONSTRUCTION SECTION: 13 11
Submittal Package. Viega MegaPress Fitting System. Chilled Water. Hydronic Heating. Fire Protection. Low Pressure Steam. Compressed Air (no oil)
Viega MegaPress Fitting System Chilled Water Hydronic Heating Fire Protection Low Pressure Steam Compressed Air (no oil) Industrial Gases Vacuum 1 of 11 Viega MegaPress Fitting System Viega MegaPress is
Effective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
INSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
Effective Date: not available -Rev. 12/1/2017- Void After: Product: Water Closets with Dual Flush Feature File No. 5645
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Suction fittings for use in swimming pools, wading pools, spas, hot tubs, and other aquatic facilities.
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
SOLUTION ASTM F1960. Sioux Chief Tubing. Mr. PEX Tubing. Sioux Chief PowerPEX. Wolverine Brass WOLV-XPEX. Milwaukee Expansion Tools
ASTM SOLUTION Sioux Chief Tubing Mr. PEX Tubing Sioux Chief PowerPEX Wolverine Brass WOLV-XPEX Milwaukee Expansion Tools Phone: 1-800-523-5130 Fax: 1-800-338-1867 www.plumbmaster.com Phone: 1-800-944-9292
IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
Effective Date: July 2016 Void After: July Product: ABS-DWV Pipe and Fittings File No. 9266
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Equivalent Length of Fittings
Equivalent Length of Fittings This section provides the equivalent length of piping pressure loss for several ProPEX fittings. The equivalent length is used to approximate the impact the fittings have
PIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
Code Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issue Date: 11-16-2009 Revision Date: 11-29-2018 Renewal Date: 11-18-2019 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications Marshall Stamping Company
Code Compliance Research Report CCRR-0145
Code Compliance Research Report CCRR-0145 Issued: 11-16-2009 Renewal Due: 11-18-2018 Revised: 11-28-2017 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications MARSHALL STAMPING COMPANY 355 Glade Mills
INSERT PRESSURE FITTINGS PRODUCTS PRICE LIST PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER Phone: (315) 451-1100 or (800) 776-2266 Fax: (800) 729-3299 7652 Morgan Road Liverpool, New York 13090 PRODUCTS INSERT PRESSURE FITTINGS
Effective Date: February 2018 Void After: February Product: Bathtubs (Plastic) File No. 3638
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing
1 1-877-700-4242 1-877-700-4242 The CONNECTION SYSTEM Includes Push-Fit and Barb Products and PEX Tubing Contents Introduction 2-3 Push-Fit Fittings 4-6 Stops and Fixture Supply Fittings 7 Push-Fitting
MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE
MATERIALS FOR PLUMBING SYSTEMS FITTING AND INSTALLATION GUIDE THINK GLOBALLY, ACT LOCALLY CONTENTS Propex DZR fittings and pex 2 Why depend on Propex hot and cold piping system 3 Cross linked polyethylene
Water Hammer Arrestors
Water Hammer rrestors watts.com What is Water Hammer? T he noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
EPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
Wirsbo hepex Tubing, 5/16" to 2" Coils Submittal information Revision I: Sept. 18, 2018 Project information
Wirsbo hepex Tubing, 5/16" to 2" Coils Revision I: Sept. 18, 2018 1 ProPEX is a registered trademark of ProPEX is a trademark of Crosslinked polyethylene PEX-a Engel method 0.22 BTU/h/ft/ F 200 F at 80
ASSE International Product (Seal) Listing Program
ASSE International Product (Seal) Listing Program ASSE 1070-2015 / ASME A112.1070-2015 / CSA B125.70-15 Performance Requirements for Water Temperature Limiting Devices Manufacturer: Contact Person: E-mail:
TOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
Submittal / Substitution Request
Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:
Pre-adjustable pressure reducing valves
Pre-adjustable pressure reducing valves H series CCREDITED ISO 9 FM / N Replaces / N Function Pressure reducing valves are devices which, when installed on water systems, reduce and stabilize the pressure
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
Product Catalogue. February We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue February 2019 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services
BlazeMaster Fire Protection Fittings Standard
BlazeMaster Fire Protection Fittings Standard ADAPTERs 5001-G Grooved Coupling Adapters (G x S) Univ. Nom. approx. DIM. A DIM. B DIM. C JOINT FIG. NO. SIZE NET WT./LBS. inches inches inches 5001-G 1-1/4"
Radiant heating and cooling Pre-insulated piping
Product Catalog July 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Upgrade to Uponor 3 Uponor Design Services and Technical Support...6
Presented to the IAPMO Standards Review Committee on March 7, 2016
Summary of Substantive Changes between the 2015 edition of ASSE 1070/ASME A112.1070/CSA B125.70, Water Temperature Limiting Devices, the 2004 edition of ASSE 1070, Water Temperature Limiting Devices, and
PRICE GROUP DISCOUNT MULTIPLIER DESCRIPTION 05 PVC INSERT FITTINGS PRODUCTS PRICE LIST PVC INSERT PRESSURE FITTINGS
PRICE GROUP DESCRIPTION 05 PVC INSERT FITTINGS DISCOUNT MULTIPLIER PRODUCTS PVC INSERT PRESSURE FITTINGS PVC INSERT FITTINGS RECOMMENDED INSTALLATION RECOMMENDED INSTALLATION PROCEDURES INSERT (BARBED)
No Lead Pex Fittings. Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List
Pex Fittings Price List LT-NLPF1015 Effective Date: October 1, 2015 Supersedes April 25, 2014 Price List Third Party Certified / Forged Brass Legend Brass PEX Fittings are dezincification resistant and
YORKEX HARD KUTERLON PLASTIC COATED. Wall 10mtr 25mtr
YORKSHIRE COPPER TUBE BS EN1057 YORKEX H/HARD YORKEX CHROME YORKEX HARD (T/X) PLATED O/D Press O/D Press O/D Press Wall Stock Lth 65C Wall Stock Lth 65C Wall Stock Lth 65C MM 3mtr 6mtr Bar MM 3mtr 6mtr
SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL WATER CRIMP EDITION: 0001
WATER CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 WATER CRIMP FORZA GLOBAL are the manufacturers and distributors of FORZA PE-Xa PIPING Systems
Product Catalogue. July We mean progress. PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue July 2018 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping We mean progress. Table of contents Table of contents 1 Uponor Design Services and
SHARKBITE. PEX Plumbing a Better Home
SHARKBITE PEX Plumbing a Better Home Benefits of SharkBite PEX PROUDLY AMERICAN MADE Health/Safety No glue, solder, or solvents required for the connection process, which keeps potentially dangerous chemicals
Ecoflex pre-insulated pipe energy efficiency made easy
E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL WATER CRIMP EDITION: 0001
WATER CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 WATER CRIMP FORZA GLOBAL are the manufacturers and distributors of FORZA PE-Xa PIPING Systems
Wirsbo / AquaPEX. AquaPEX Tube. White Coils. White Straight Lengths. Wirsbo AquaPEX plus Tubing. Red Coils. Blue Coils PAGE 055-1
2011 Wirsbo / AquaPEX PAGE 055-1 Code# Description Pkg Mfg# AquaPEX Tubing AquaPEX Tube Wirsbo AquaPEX tubing is used in hot and cold potable water distribution systems and Uponor residential fire safety
IAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints
IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing
All DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification.
All DZR stopvalve (BS1010). copper x copper. Gunmetal body. All parts in contact with water are made from material resistant to dezincification. K551DZR Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1018 - REVISED: 2001 Trap Seal Primer Valves - Potable Water Supplied MANUFACTURER: CONTACT PERSON: E-MAIL: ADDRESS:
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Model MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
Model MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
VOLUMATIC WATER REGULATOR
Introduction The Chore-Time VOLUMATIC regulator is designed to regulate water pressure for Chore-Time Layer and Brood Grow Nipple Watering Systems. There is a model for manual adjustment of the regulator
Customer Class File Number PLUMBING FITTINGS - Push-Fit Fittings- SharkBite 2" Coupling. SharkBite 2" x 1-1/2" Reducing Coupling
Page 1 of 5 Region English Careers News Contact Us Enter Search Term... HOME ABOUT SERVICES INDUSTRIES SHOP CSA Log In Home Services Testing & Certification Certified Product Listing 067690_0_000 Certification
PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE. Making ProPEX Connections
PLUMBING, FIRE SAFETY, AND RADIANT HEATING AND COOLING SYSTEMS INSTRUCTIONAL GUIDE Making ProPEX Connections Table of Contents Making ProPEX Connections....................... General ProPEX Connection
Installation/Care/Use Manual
Installation/Care/Use Manual EMASM Surface Mount Bottle Filling Station IMPORTANT THIS IS AN INDOOR APPLICATION ONLY! ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSONNEL. TOOLS/ITEMS REQUIRED
FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
Installing ASI Umbilical Delivery Systems
Rev A 05 Nov 2015 Page 1 of 10 PURPOSE This guide provides an overview of tubing connections into an ASI wall-mounted Junction Box that has already been plumbed with a compressed air connection including
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
Horizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
Vertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
COMPONENTS MANUFACTURING
COMPONENTS MANUFACTURING ASSEMBLY TESTING Manifolds Valex Manifolds PCW, CFOS, UHP Configurations with ball valve, diaphragm valve & bellows valve options Main run lengths up to 24 feet & 12 inch in diameter
Simple to install connection fails. The Talbot Pushfit fitting is pressure rated PN 16.
Talbot Pushfit Talbot Pushfit - Fittings for Water Pipe Talbot Grippa Universal Service Connector The Talbot Pushfit connection is a tried and tested method of connecting low, The Talbot Grippa is a universal
SECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
Product Catalogue. July PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalogue July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services
DT400/436 Tee Connector Installation Instructions
Connectors Lorem ipsum and dolor Splices sit Amat Effective September 2014 Supersedes IS550-30-1 March 2011 MN650001EN DT400/436 Tee Connector Installation Instructions DISCLAIMER OF WARRANTIES AND LIMITATION
Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Installed Date:
Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date Installed Date: introduction < STANDARDS > ASTM F1412 ASTM D 4101 ASTM D 635
PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalog July 2016 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping Table of contents Uponor begins with you 3 Optimized for mobile 5 Uponor Design Services
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping
Product Catalog February 2017 PEX plumbing Fire safety Hydronic piping Radiant heating and cooling Pre-insulated piping See inside for our newly reduced prices on PEX-a pipe supports, brass valves and
>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
Section GATE VALVES
Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT
Football Equipment. 5 9/16" Gooseneck Goalposts
5 9/16" Gooseneck Goalposts Football Equipment FB55CG 5 9/16" Gooseneck College Goalposts Applies also to FB55CG-SY and FB55CG-WT Goalposts shall meet all NCAA rules. Goalposts shall be of the single bent
PVC Push Fit System. No glue. No wait. Just push and go.
PVC Push Fit System No glue. No wait. Just push and go. Join the revolution. A technical leader for over 50 years, LASCO fittings are relied upon worldwide. Now with the launch of their revolutionary
HYDRALECTRIC LIMITED,
Description:...2 Applications:...2 General Performance Data:...2 Pressure:...3 General Construction Data:...4 Dimensioning:...4 Hose Data:...4 Ferrule Data:...5 Standards:...5 Installation:... Chemical
Quality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
>B< Push Technical Brochure
COPPER MULTILAYER PE-X PB CARBON STEEL >B< Push Technical Brochure Rev 1.15 Contents Abbreviation Key Overview...2 Key Benefits...4 Tube Compatibility...6 Installation Guide...8 Demounting Tool...9 EPDM
Product Catalog. Flawlessly moving water to provide the ultimate in comfort, safety and convenience for residential and commercial applications.
Product Catalog APRIL 2009 Radiant Heating and Cooling Systems Plumbing Systems Fire Safety Systems Pre-insulated Pipe Systems Flawlessly moving water to provide the ultimate in comfort, safety and convenience
>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
The Incredible Metric Series Pools
The Incredible Metric Series Pools Aboveground, Inground and Everything in Between! Why a Radiant Pool? The Radiant Pool offers homeowners the most incredible features and benefits that you won t find
MDX² INSTALLATION MANUAL (RETROFIT FIBERGLASS, VINYL & CONCRETE POOLS WITH MDX)
Only for Pools with an existing MDX sump ANTI-ENTRAPMENT DEBRIS DRAIN MDX² INSTALLATION MANUAL (RETROFIT FIBERGLASS, VINYL & CONCRETE POOLS WITH MDX) Safety compliant according to the Virginia Graeme Baker
316L STAINLESS STEEL PRESS SYSTEM 316L SERIES
316L STAINLESS STEEL PRESS SYSTEM 316L SERIES WHY IMPRESS? COST SAVINGS More than 10 x QUICKER than conventional welding 30 Year Press Fit tightness Guarantee Quick & Easy to Install No Consumables Press
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
36E DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WTE-RODGERS 36E54-214 DSI and HSI Two-Stage Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
ABS DWV FITTINGS BOW INDUSTRIAL CORPORATION
JANUARY 31, 2011 SUPERCEDES ABS-0111 ASTM D2661 BOW INDUSTRIAL CORPORATION CHAMPLAIN, NY USA TEL: 800.852.8527 info@bow-group.com FAX: 800.526.5668 www.bow-group.com JANUARY 31, 2011 Page 1 COUPLING (Hub
BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
Installation Instructions
Installation Instructions Durametallic MD-200 Series Gas Dual Cartridge Canister Seal for Mixers and Agitators Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment
Annex to the Accreditation Certificate D-IS according to DIN EN ISO/IEC 17020:2012
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-11027-03-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 14.02.2017 to 13.02.2022 Date of issue: 08.06.2017
VOLUMATIC WATER REGULATOR
VOLUMATIC WATER REGULATOR For Cage Systems - PDS and Manual Adjustment Part Number 00-, 00-, 00- Introduction The Chore-Time VOLUMATIC Water Regulator is designed to regulate the water pressure for the
SECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.
Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Series 8500 Expansion Compensators. Catalog 674H
Series 8500 Expansion Compensators Catalog 674H 500 Laminated Bellows Expansion J Series 8500 on Joints Expansion Compensators Sizes 3/4" through 4" Threaded, welded, flanged and grooved steel pipe joints