2000-SERIES MODULAR BELTS

Transcription

1 2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement and an extended wearlife. The belt is fully supported by the sprocket. Perfect product handling Surface flatness and design provide optimum product support. Together with the finger plates, 2000-series Raised Rib belts ensure trouble-free transfer of products onto and from the belt. Easy installation and maintenance The pin retention clips at the sides can easily be fitted and removed. BOTTLE CONVEYOR WITH PLASTIC 2000-SERIES BELT. PROGRAMME Flush Grid The 31% open area of Flush Grid (FG) belts guarantee an optimum flow of water, dirt and air; at the same time the large support area gives good product support and a long wearlife. They are suitable for large 3-piece cans and are also used in the food and automotive industry. Flat Top The closed surface makes Flat Top (FT) belts suitable for large, odd-shaped products. Raised Rib The 30% open area of Raised Ribs (RR) combined with a maximum support area and optimum temperature (up to 104 C) and chemical resistance make these belts ideal for (double deck) pasteurizers, warmers and coolers; they are also used for large accumulation tables. Positrack (RRP) is possible. Raised Rib Heavy Duty A reinforced yellow Raised Rib belt (RRHD), intended for one-way glass and dual purpose (can/glass) applications. The open area is 27%. Positrack (RRHDP) is possible. NICE PIN RETENTION CLIPS FOR EASY INSTALLATION AND MAINTENANCE OF THE BELT. AND Series belts are mostly made of light green, wear-resistant XP-polypropylene. The 2000-series belts are always tailor-made. 56

2 2000-SERIES MODULAR CONVEYOR BELTS page 151, 152 FLUSH GRID 2000 page 134 Assembly Belt type Code nr. Temp. Temp. Working Weight Backflex last two digits range range load radius depending dry wet (max.) (min.) on width A O C O C N/m (21 O C) kg/m 2 mm 2 Pitch. For information on tolerances for specified belt widths, please contact our Technical Support department. Code nrs.: xx.xx.10 up to xx.xx.89 for widths 3 up to 240, steps 3. XP-MATERIAL (POLYPROPYLENE, LIGHT-GREEN) STANDARD FG 2000 XP to to FG 2000 XP For a listing of the last two digits in the code numbers for every belt width, please refer to the table on page 37. page 151, 152 FLAT TOP 2000 page 134 Assembly Belt type Code nr. Temp. Temp. Working Weight Backflex last two digits range range load radius depending dry wet (max.) (min.) on width A O C O C N/m (21 O C) kg/m 2 mm 2 Pitch. For information on tolerances for specified belt widths, please contact our Technical Support department. Code nrs.: xx.xx.10 up to xx.xx.89 for widths 3 up to 240, steps 3. XP-MATERIAL (POLYPROPYLENE, LIGHT-GREEN) STANDARD FT 2000 XP to to FT 2000 XP For a listing of the last two digits in the code numbers for every belt width, please refer to the table on page

3 2000-SERIES MODULAR CONVEYOR BELTS page 72 page 151, 152 RAISED RIB 2000 page 134 Assembly Belt type Code nr. Temp. Temp. Working Weight Backflex last two digits range range load radius depending dry wet (max.) (min.) on width A O C O C N/m (21 O C) kg/m 2 mm XP-MATERIAL (POLYPROPYLENE, LIGHT-GREEN) STANDARD RR 2000 XP to to RR 2000 XP CENTER POSITRACK RRP 2000 XP to to RRP 2000 XP Pitch. For information on tolerances for specified belt widths, please contact our Technical Support department. The double Positrack lugs in the center of the belt ensure its precise positioning. Code nrs.: xx.xx.10 up to xx.xx.89 for widths 3 up to 240, steps 3. For a listing of the last two digits in the code numbers for every belt width, please refer to the table on page 37. RAISED RIB 2000 BELT WITH POSITRACK 58

4 2000-SERIES MODULAR CONVEYOR BELTS page 72 page 151, 152 RAISED RIB 2000 HEAVY DUTY page 134 Assembly Belt type Code nr. Temp. Temp. Working Weight Backflex last two digits range range load radius depending dry wet (max.) (min.) on width A O C O C N/m (21 O C) kg/m 2 mm YP-MATERIAL (POLYPROPYLENE, YELLOW) STANDARD RRHD 2000 YP to to RRHD 2000 YP CENTER POSITRACK RRHDP 2000 YP to to RRHDP 2000 YP Pitch. For information on tolerances for specified belt widths, please contact our Technical Support department. The double Positrack lugs in the center of the belt ensure its precise positioning. Code nrs.: xx.xx.10 up to xx.xx.89 for widths 3 up to 240, steps 3. For a listing of the last two digits in the code numbers for every belt width, please refer to the table on page 37. RAISED RIB 2000 HEAVY DUTY BELT WITH POSITRACK 59

5 SPLIT SPROCKETS AND IDLERS SPROCKETS FOR 2000 BELTS SQUARE BORE Sprocket type Code nr. Nr. of Bore Pitch Outside Hub width Weight teeth diameter diameter METRIC BORES SS x90 POM x SS x90 POM x SS x120 POM x page 61 SPROCKETS FOR 2500 BELTSF SQUARE BORE Sprocket type Code nr. Nr. of Bore Pitch Outside Hub width Weight teeth diameter diameter METRIC BORES SS x120 RPA x

6 CLASSIC SPROCKETS AND IDLERS SPROCKETS FOR 2000 BELTS ROUND BORE Sprocket type Code nr. Nr. of teeth Bore Pitch Outside Hub width Weight diameter diameter METRIC BORES AND KEYWAYS CS CS CS CS CS CS CS CS For humid, hot applications like pasteurizing, special sprockets are available, see page 152. SPROCKETS FOR 2000 BELTS SQUARE BORE Sprocket type Code nr. Nr. of teeth Bore Pitch Outside Hub width Weight diameter diameter METRIC BORES CS x x CS x x CS x x CS x x CS x x CS x x CS x x CS x x CS x x For humid, hot applications like pasteurizing, special sprockets are available, see page

7 CLASSIC SPROCKETS AND IDLERS SPROCKETS FOR HUMID APPLICATIONS FOR 2000 BELTS ROUND BORE Sprocket type Code nr. Nr. of teeth Bore Pitch Outside Hub width Weight diameter diameter METRIC BORES AND KEYWAYS CS POM CS POM CS POM CS POM CS POM CS POM INCH BORES AND KEYWAYS CS /2 POM SPROCKETS FOR HUMID APPLICATIONS FOR 2000 BELTS SQUARE BORE Sprocket type Code nr. Nr. of Bore Pitch Outside Hub width Weight teeth diameter diameter METRIC BORES CS x40 POM x CS x60 POM x CS x65 POM x CS x40 POM x CS x60 POM x CS x65 POM x CS x40 POM x CS x65 POM x CS x90 POM x CS x65 POM x CS x90 POM x CS x120 POM x

8 FINGER TRANSFERS page 58, 59 page 73 CLICK-COMB FINGERPLATES FOR 2000-SERIES RAISED RIB STANDARD Click-Comb fingerplate type Code nr. Length Width W Weight mm mm kg XLG-MATERIAL 2000 XLG 190 x XLG 190 x page 58, 59 page 73 CLICK-COMB FINGERPLATES FOR 2000-SERIES RAISED RIB FOR GLASS HANDLING Click-Comb fingerplate type Code nr. Length Width W Weight mm mm kg XLG-MATERIAL GL 2000 XLG 163 x GL 2000 XLG 163 x page 58, 59 FINGER TRANSFER SYSTEM FOR PASTEURIZERS AND ACCUMULATION TABLES 72 Product Code nr. Length Width W Weight mm mm kg REINFORCED POLYAMIDE DTS-C x