PLATE TOP AND GRIPPER CHAINS
|
|
- Lorraine Daniel
- 5 years ago
- Views:
Transcription
1 PLTE TOP ND GRIPPER CHINS Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater ing capacity and permits even higher speeds and longer runs than slatband chains. The roller based Gripper is perfect for product elevating, lowering, rinsing, sterilizing and inverting, by means of soft rubber gripper elements. The base chain is made of steel or stainless steel. FETURES - Plate Top chains These chains permit a huge ing capacity, higher speeds and longer runs with a single drive. The straight running 843- and the 1843-series have a roller base chain NSI 40. The 12.7 small pitch reduces the sagging effect and permits the use of smaller sprockets. They are recoended for step by step positioning. The straight running and 963-series have a roller base chain NSI 60. The sideflexing 1874-, 1873-, and 3873-series have a roller base chain Side Bow NSI 63 SB. They also very suitable for step by step positioning. Plate Top chains fitted with steel s are designed for abrasive and heavy duty or hightemperature conditions. 963-, 1873-, and series, with snap-on plastic s combine the benefits of a plastic conveying surface with those of a precision roller base chain: less slip-stick, high working and accurate positioning; the replaceable s are clipped on to the protruding pins. - Gripper chains Main applications of Plate Top Gripper chains can be found in glass works. However, they can be used in various other situations, such as crate handling and can manufacturing. Typical Gripper solutions are omegas for easy crossing of production lines, all lifting and lowering with Gripper chain elevators. The grippers are provided in 2- or 3-finger grippers for smaller products and in D- Grippers for other applications. - s ll roller based chains are supplied in 10 ft sections and provided with a connection link, so that the chains can be coupled very easily. - Sprockets Plate Top chains don t require special sprockets. Standard NSI 40 and 60 sprockets will fit; therefore they are not part of Rexnords standard offering. 90
2 PROGRMME PLTE TOP ND GRIPPER CHINS PLTE TOP 1864 Straight running chains with steel s, suitable for heavy s, long distances and high speeds. The chain consists of a base roller chain with welded on s in various steel alloys. The gap between the plates is 1.6 wide 963 Straight running chains with plastic overlapping s, therefore a uni-directional travel. The continuous surface facilitates stability and eases operations with unstable products 843 Straight running chains with plastic overlapping s, clipped on the protruding pins. Uni-directional travel 1843 TB ing tab chains with plastic s. Same construction as TB ing chains with steel snap-on s to form a continuous flat conveying surface. Hold-down tabs provide positive retention in curves and inclines. They will be used in abrasive and heavy duty or high-temperature conditions 1873 TB ing chains with plastic s; bi-directional travel. lso available with a rubber, anti-slip insert for inclined conveying up to 25. The TB guides permit to continue either from an inclined run to a plain one or vice versa 3873 TB ing chains with plastic s for a continuous surface, even in tight. Perfect for transport of trays. The Polycarbonate s are extreme resistant against impact GRIPPER 1874 TB Fitted with steel s for abrasive or high-temperature conditions. The base is a standard roller chain Side Bow NSI 63 SB. The gripper elements are available as GD (smooth pad) and GJ (grooved pad); as clipped on they are easily replaceable. The clip for the TB guide is riveted on the. The heavy duty execution can handle higher s, resulting in an increased tensile strength by 15%, and permits reduced stretching during operation. The heavy duty design of the s implies that guide and are a singe unit 1843 TB Fitted with thermoplastic s for a quieter and smoother operation; these mini-gripper chains enable reduction of plant weight, increase of conveying speed and dry service. The base is a standard roller chain Side Bow NSI 43 SB. The clipped on gripper elements are available as GD (smooth pad) and GJ (grooved pad). These chains are specially suited for conveying ampoules, test tubes and other minute products, such as small industrial components 1873 TB Fitted with thermoplastic s for a quieter and smoother operation, enabling reduction of plant weight, increase of conveying speed and dry service. The base chain is a standard roller chain Side Bow NSI 63 SB. GSD/GS2J/GS3J grippers are clipped on for easy replacement, GDB/GJB grippers are resistant to bending and GJM grippers are integrated in the, ideal for packaging applications The chain description consists of respectively the material,, a K number for the plate width in es, a G for grippers and a code indicating the gripper execution: D for D-style grippers, providing a smooth pad or flat surface; J for grooved path, in some cases combined with the number of gripper fingers per link. Finally S means a special rubber gripper assembly system, resistant to bending. M stands for an integrated gripper, moulded into the, ideal for packaging applications. PPLICTION Clean, Clean, brasive, brasive, Clean, Clean, brasive, brasive, PLTE TOP dry, wet, dry, wet, dry, wet, dry, wet, Incline CHIN TYPE light duty light duty light duty light duty heavy duty heavy duty heavy duty heavy duty conveyor SS TB 1874 TB 1873 TB, LF 1873 TB, WX 3873 TB HFP 1873 TB Large PPLICTION Small empty Small full empty Large full High, Rinser application, GRIPPER product product product product abrasive application, high CHIN TYPE elevator elevator elevator elevator application ambient temperature 1874 TB, stainless steel 1874 TB HD, stainless steel 1843 TB, LF 1873 TB, HP 1873 TB, LF Steel base chains are recoended for dry applications, stainless steel base chains are recoended for wet applications. Best choice Optional Rinser 91
3 PLTE TOP CHINS MTERIL STRIGHT RUN STEEL TOP PLTE Connection link STEEL TOP PLTE/STEEL BSE CHIN 1864-K K K K CL-1864 C STINLESS STEEL TOP PLTE/STINLESS STEEL BSE CHIN 1864 SS-K SS-K SS-K SS-K Min. backflex CL-1864 SS MTERIL STRIGHT RUN PLSTIC TOP PLTE Connection link LF-CETL TOP PLTE/STEEL BSE CHIN LF 963-K325 L LF 963-K450 L LF 963-K600 L LF 963-K750 L CL LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN LF 963 SS-K325 L LF 963 SS-K450 L LF 963 SS-K600 L LF 963 SS-K750 L CL-63 SS Min. backflex
4 PLTE TOP CHINS MTERIL STRIGHT RUN ½ PITCH PLSTIC TOP PLTE Connection link LF-CETL TOP PLTE/STEEL BSE CHIN LF 843-K138 L L LF 843-K144 L L LF 843-K200 L L LF 843-K325 L L CL LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN LF 843 SS-K138 L L LF 843 SS-K144 L L LF 843 SS-K200 L L LF 843 SS-K325 L L Standard length: m 10 feet (240 links) CL-843 SS Min. backflex 153. upon request MTERIL SIDEFLEX ½ PITCH TB PLSTIC TOP PLTE LF-CETL TOP PLTE/STEEL BSE CHIN LF 1843 TB-K125 L LF 1843 TB-K200 L CL MO-CL Standard length: m 10 feet (240 links). Min. backflex
5 PLTE TOP CHINS MTERIL SIDEFLEX TB STEEL TOP PLTE STEEL TOP PLTE/STEEL BSE CHIN 1874 TB-K K3-1/ TB-K K4-1/ TB-K K TB-K K7-1/ STINLESS STEEL TOP PLTE/STINLESS STEEL BSE CHIN 1874 TB SS-K SSK3-1/ TB SS-K SSK4-1/ TB SS-K SSK TB SS-K SSK7-1/ CL CL-63 SS Min. backflex 254. Small Gap MTERIL SIDEFLEX TB SMLL GP 11,8 MM LF-CETL TOP PLTE/STEEL BSE CHIN LF 1873 TB SG-K450 L ,3 4,50 2,30 L CL BWR-TOP PLTE/STEEL BSE CHIN BWR 1873 TB SG-K450 L ,3 4,50 2,30 L CL WX-POLYMIDE COMPOSITE TOP PLTE/STEEL BSE CHIN WX 1873 TB SG-K450 L ,3 4,50 2,30 L CL
6 PLTE TOP CHINS MTERIL SIDEFLEX TB PLSTIC TOP PLTE LF-CETL TOP PLTE/STEEL BSE CHIN LF 1873 TB-K325 L L LF 1873 TB-K450 L L1873LF LF 1873 TB-K600 L L1873LF LF 1873 TB-K750 L L1873LF LF 1873 TB-K1000 L L1873LF LF 1873 TB-K1200 L L1873LF LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN LF 1873 TB SS-K325 L L LF 1873 TB SS-K450 L L1873LF LF 1873 TB SS-K600 L L1873LF LF 1873 TB SS-K750 L L1873LF LF 1873 TB SS-K1000 L L1873LF LF 1873 TB SS-K1200 L L1873LF WX-POLYMIDE COMPOSITE TOP PLTE/STEEL BSE CHIN Min. backflex 305. * sk customer service for minimum order quantity of WX 1873 chains. CL CL-63 SS WX 1873 TB-K450 L * L CL-63 SS
7 PLTE TOP CHINS MTERIL SIDEFLEX TB PLSTIC TOP PLTE CLOSED SURFCE LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN LF 3873 TB SS-K1000 L CL-63 SS PC POLYCRBONTE TOP PLTE/STINLESS STEEL BSE CHIN WPC 3873 TB SS-K1200 L CL-63 SS Min. backflex 178. MTERIL SIDEFLEX TB PLSTIC TOP PLTE WITH RUBBER HFP 1873 TB-K750 L L HFP 1873 TB-K1000 L L CL HFP 1873 TB-K1200 L L HFP 1873 TB SS-K750 L L HFP 1873 TB SS-K1000 L L CL-63 SS HFP 1873 TB SS-K1200 L L Rubber: SEBS grey; 60 shore hardness. Other rubber patterns and materials are possible. Min. backflex 305. sk customer service for minimum order quantity. LF-CETL TOP PLTE/STEEL BSE CHIN LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN 96
8 PLTE TOP GRIPPER CHINS MTERIL GRIPPER STEEL TB * 34.1 FOR STRIGHT RUNNING CHINS STEEL TOP PLTE/STEEL BSE CHIN 1874 TB-K363 GDB L TB-K363 GJB L CL STINLESS STEEL TOP PLTE/STINLESS STEEL BSE CHIN 1874 TBSS-K363 GDB L TBSS-K363 GJB L CL-63 SS Gripper: EPDM black; 50 shore hardness. MTERIL GRIPPER STEEL TB HEVY DUTY * 34.1 FOR STRIGHT RUNNING CHINS STEEL TOP PLTE/STEEL BSE CHIN 1874 TB HD-K363 GDB L TB HD-K363 GJB L CL-1874 HD STINLESS STEEL TOP PLTE/STINLESS STEEL BSE CHIN 1874 TB HDSS-K363 GJB L TB HDSS-K363 GDB L CL-1874 HD SS Gripper: EPDM black; 50 shore hardness. 97
9 PLTE TOP GRIPPER CHINS MTERIL GRIPPER ½ PITCH PLSTIC TB * 21.4 FOR STRIGHT RUNNING CHINS LF-CETL TOP PLTE/STEEL BSE CHIN LF 1843 TB-K150 GDB L LF 1843 TB-K150 GJB L CL MO-CL LF-CETL TOP PLTE/STINLESS STEEL BSE CHIN LF 1843 TBSS-K150 GDB L LF 1843 TBSS-K150 GJB L CL-1843 SS 1843 SS-MO-CL Standard length: m 10 feet (240 links). Gripper: EPDM black, 40 shore hardness. MTERIL SNP-ON CLOSED GRIPPER PLSTIC TB Chain Code nr. Plate width Gripper Weight width C pollici HP-CETL TOP PLTE/STEEL BSE CHIN HP 1873 TB-K325 GSD L , HP 1873 TB-K450 GSD L , CL HP-CETL TOP PLTE/STINLESS STEEL BSE CHIN HP 1873 TBSS-K325 GSD L , HP 1873 TBSS-K450 GSD L , CL-63 SS Gripper: EPDM grey, 55 shore hardness. 98
10 ,6 31,8 34,9 57,2 PLTE TOP GRIPPER CHINS Ø11,91 C 31,8 34,9 57,2 MTERIL 12,6 20,6 SNP-ON 2-FINGER GRIPPER PLSTIC TB 31 52,1 19,05 19,05 5,08 41,4 24,5 Chain Code nr. Plate width Gripper Weight width C HP 1873 TB-K325 GS2J HP 1873 TB-K450 GS2J HP 1873 TBSS-K325 GS2J HP 1873 TBSS-K450 GS2J L L L L Gripper EPDM black, 45 shore hardness pollici HP-CETL TOP PLTE /STEEL BSE CHIN HP-CETL TOP PLTE /STINLESS STEEL BSE CHIN CL CL-63 SS Version K325 Version K450 C * C MTERIL Ø11,91 GS3J GS3J H 20,6 24,5 H SNP-ON 3-FINGER GRIPPER PLSTIC TB 19,05 19,05 5,08 H= 34 for GS3J H= 46 for GS3J H= 34 for GS3J H= 46 for GS3J Chain Code nr. Plate width Gripper Weight width C HP 1873 TB-K325 GS3J HP 1873 TB-K450 GS3J HP 1873 TBSS-K325 GS3J HP 1873 TBSS-K450 GS3J HP 1873 TB-K325 GS3J HP 1873 TB-K450 GS3J HP 1873 TBSS-K325 GS3J HP 1873 TBSS-K450 GS3J L L L L L L L L pollici HP-CETL TOP PLTE /STEEL BSE CHIN HP-CETL TOP PLTE /STINLESS STEEL BSE CHIN HP-CETL TOP PLTE /STEEL BSE CHIN HP-CETL TOP PLTE /STINLESS STEEL BSE CHIN Gripper EPDM grey 55 shore hardness for GS3J K325-K450, gripper black for GS3J K shore hardness CL-63 CL-63 SS CL-63 CL-63 SS
11 PLTE TOP GRIPPER CHINS MTERIL CLOSED GRIPPER PLSTIC TB * 34.1 FOR STRIGHT RUNNING CHINS pollici HP-CETL TOP PLTE/STEEL BSE CHIN HP 1873 TB-K375 GSD L CL HP-CETL TOP PLTE/STINLESS STEEL BSE CHIN HP 1873 TBSS-K375 GSD L CL-63 SS Standard length: m 10 feet (160 links) Gripper EPDM Grey, 55 shore hardness. MTERIL GS3J 3-FINGER GRIPPER PLSTIC TB pollici HP-CETL TOP PLTE/STEEL BSE CHIN HP 1873 TB-K375 GS3J L CL HP-CETL TOP PLTE/STINLESS STEEL BSE CHIN HP 1873 TBSS-K375 GS3J L CL-63 SS Standard length: m 10 feet (160 links) Gripper EPDM Grey, 55 shore hardness. 100
12 PLTE TOP GRIPPER CHINS MTERIL INTEGRTED GRIPPER PLSTIC TB * 33.3 FOR STRIGHT RUNNING CHINS pollici LF-CETL TOP PLTE /STEEL BSE CHIN LF 1873 TB-K325 GJM L CL LF-CETL TOP PLTE /STINLESS STEEL BSE CHIN LF 1873 TBSS-K325 GJM L CL-63 SS Gripper TPE black, 75 shore hardness. 101
STRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains
812 815 STRAIGHT RUNNING CHAIN Series 1874 GV Sideflexing steel gripper chains 1874 GV GRIPPER CHAINS with vulcanized rubber pads 9.5 3.1 23.8 31.8 SC 56.5 21 17 7 19.05 19.05 Ø 5.08 Ø 11.91 14.35 25 12.7
More informationQ Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket
Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22
More information2000-SERIES MODULAR BELTS
2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationConveyor system X85 - links and chains
Conveyor system X85 - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Plain chain Material abbreviations: see page. X5 X5H
More informationBelt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
More informationRexnord 815 TableTop Chain
815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information
More informationSERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
More informationConveyor system X85, links and chains
Conveyor system X85, links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain
More informationConveyor system XL - links and chains
Conveyor system XL - links and chains Each link kit contains 10 links, 10 plastic, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: see page 3. Plain chain, standard width
More informationConveyor system XL - links and chains
Conveyor system XL - links and chains Conveyor system XL - links and chains Each link kit contains 10 links, 10 plastic, and 10 stainless steel pins, unless otherwise specified. Material abbreviations:
More informationSERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
More informationTelescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
More informationTsubaki Sprocket Capabilities
Tsubaki Sprocket Capabilities Introduction to Made-to-Order Sprockets At Tsubaki, our commitment is to bring you the highest value in the industry today. Period. And as a full line supplier of power transmission
More informationConveyor system XM - links and chains
Conveyor system XM - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain
More informationRoller Link Plate Pin Link Plate Roller Bushing Pin. Closed type Connecting Link
chain consists of roller links and pin links in series. RIVEE CHAIN COERE CHAIN chain ARS & LINKS. Link late in Link late Bushing in CONNECION OF ROLLER CHAIN Connecting Link Offset Link Spring clip type
More informationBelt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
More informationFair Winds Boat Repairs, LLC Riberia St. #7 St. Augustine, Fl
Fair Winds Boat Repairs, LLC. 904-669- 6045 134 Riberia St. #7 www.fairwindsboatrepairs.com St. Augustine, Fl 32084 fairwindsboatrepairs@comcast.net INNOVATION ON THE WATER For over 10 years Walker Bay
More informationSECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
More informationIt allows you to. is the Best Option. More information at
Document - 17AIO Launch and Retrieve by yourself without getting your partner wet Copyright C Release & Retrieve Boat Latch Pty Ltd, 2016 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationNitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
More informationCOMPETITION EQUIPMENT. Enjoy the game
COMPETITION EQUIPMENT Enjoy the game Competition Equipment The only board approved by FINA for world championships Powered by DURAFLEX aluminium springboards have been used exclusively in all Olympic diving
More informationCLIMBING Pads. Straps Gaffs Spikes Hardware
CLIMBING Pads Straps Gaffs Spikes Hardware Quick Change Aluminum Climbers CTB Tree and Pole Climbing Kit Kit with straps and L pads Patented design give these climbers strength, durability and style Utilizes
More informationRexnord 4705 MatTop Chain Assembled-to-Width
Prefix W WLT BLT MR AS R FR HS W BSM P LUV HUV BWR WX TC Cha 4705 Cha Inforation Cha Capacity Nuber of Sprockets ft of width of width 0% 80% 80% 100% Blue Melt AntiStatic Red Flae Retardant Heat Stabilized
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationRACING TO PERFORMANCE DETAIL B (11) Ra 3,2
(9) 0,5 X 45 RCING TO PERFORMNCE DETIL B (11) B www.afam.com Ra 3,2 (7) Sprockets 4 FRONT SPROCKETS fam uses the best alloy steel available to produce their front sprockets. Minimum tolerances combined
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationTrench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against
More informationRubber Lining, Conveyors & Ceramics
Wenco Fabric Belts Wenco has always focused on meeting the needs of the bulk material handling industry by supplying various high quality types of conveyor belts to the industry. he carcass consists of
More informationRoughneck TM Mesh Slings
Roughneck TM Slings ROUGHNECK WIRE MESH SLINGS Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings Features and Benefits Promotes Safety Steel
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationPN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
More informationISLAND MOORING SUPPLIES, LLC (IMS)
(IMS) Established 2003 ~ Quality ~ 2019 CATALOG ~ Innovation ~ TITAN MOORING BUOY ~ Value ~ MAST BUOYS MOORING PENDANT EFFECTIVE AS OF 01/01/2019 Manufacturing Quality Products Since 2003 Page 1 INDEX
More informationConveyor system XS - links and chains
Conveyor system XS - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Material abbreviations: See page III. Introduction Plain
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationRexnord 815 TableTop Chain Straight Running
Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2
More informationHoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
More informationSOFRASAR TUNNEL PRODUCTS CONNECTING ALL COMPONENTS
www.optimas.com SOFRASAR TUNNEL PRODUCTS CONNECTING ALL COMPONENTS CONTENTS DOWEL SYSTEM SOF-FIX AXIS 110 PG. 06 DOWEL SYSTEMS 04 BOLTING SYSTEMS 08 GROUT LIFT SOCKETS 11 CENTERING DOWELS AND SHEAR DOWELS
More informationRoller Chain and Sprocket Troubleshooting Guide
Roller Chain and Sprocket Troubleshooting Guide Drive System (Roller Chain and Sprockets) Troubleshooting Guide 1. General Chain is riding up on the sprocket. The roller chain and sprocket do not match.
More informationUVEX PHEOS SAFETY GLASSES UVEX PHEOS SAFETY GLASSES HEADBAND CHIN STRAP ACCESSORIES. Product Code: HA1/001. DESCRIPTION Eye protective wear
These products were developed as aiding tools to the current systems and products. They include safety glasses, etriers, gloves and headlamps. UVEX PHEOS SAFETY GLASSES Product Code: HA1/001 Eye protective
More informationLiftAlloy TM Chain Slings
LiftAlloy TM LiftAlloy CHAIN SLING BASICS Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations LiftAlloy chain slings, available in grade 00 for 7/32" through 3/4",
More informationRS:RACING EVOV - The Performance Leader. Sizes Luff Boom/cm Base Battens Cams Ideal Mast Top Finishing Code
RS:RACING EVOV - The Performance Leader Year after year, the NeilPryde RS:Racing sail is the sail by which all others are measured the true global benchmark of racing performance. The latest version of
More informationUtility Anchor System
Utility Anchor System The Dayton Superior Utility Anchor System is designed to economically simplify the lifting and handling of precast concrete elements. Its economics, ease of use and versatility will
More informationSKF Transmission chain
SKF ransmission chain Standard and compliance SKF s are manufactured in state of the art facilities. ight quality controls are employed to assure product conformance to the ISO standards and the existing
More informationLess power great performances
148 SMART SMART Less power great performances SMART is the answer to the increasing demand for both low energy consumption and high efficiency. Based on many years experience in road lighting, it offers
More information609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L)
1/8" Tube Thickness (3129L) 609W (Dry Cement Delivery) (Specification 3129F, 3129H, 3129L) Per 3 76.2 3.47 88.1 40.28 36.0 914 1.30.59 100 ft. X 3129-0660 $26.01 4 101.6 4.47 113.5 40.28 48.0 1219 1.71.78
More informationFIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions
FIRST TEAM SPORTS, INC Storm Portable Series Assembly Instructions WARNING! WARNING! WARNING! THIS BASKETBALL SYSTEM IS SPRING LOADED AND SHIPPED UNDER TENSION. ATTEMPTING TO ASSEMBLE OR DISASSEMBLE ANY
More informationCable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 7 Straight running belts 40 mm (1.57 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationVapor Sorption Analyzer
Vapor Sorption Analyzer Quick Start Guide 1. Getting Started Place the AquaLab VSA on a flat surface. Use the bubble level(figure 1: Adjustment and bubble level) and use the adjustable feet to level the
More informationVermeer. Chains. Cutting Teeth. Sprockets. Bearings. Carbide Teeth. Centralized Customer Service: 800/
Tr e n c h e r P a r t s Vermeer Chains Cutting Teeth Sprockets Bearings Carbide Teeth Anoka, Minnesota Atlanta, Georgia Ontario, California Centralized Customer Service: 800/328-2424 w w w. b a l l a
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationTechnical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
More informationSTEEL & PLASTIC STRAPPING
STEEL & PLASTIC STRAPPING For over 75 years, Continental Western Corporation (CWC) has been proud to provide our distributors with quality products, timely delivery and outstanding customer service. In
More informationVolleyball. Order online at
Volleyball A great range of competition and practice volleyball posts to suit any school, college or sports centre, a full installation service is available for wall fixed posts and floor fixings, please
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationE10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10 E10. Cable gland Series 8161/7, 8161/8. Installation Equipment and Accessories E10/1.
> Explosion protection type "Increased safety" > Degree of protection IP68 > Ex e and Ex i versions > Integrated blind plug (accessory) for closing unused cable glands > Cable diameter ranges from 1 to
More informationVOLLEYBALL. ORDER ONLINE AT 167
VOLLEYBALL A great range of competition and practice volleyball posts to suit any school, college or sports centre, a full installation service is available for wall fixed posts and floor fixings, please
More informationRubber and Ceramic Lagging. w w w. f o r e c h. c o m
Rubber and Ceramic Lagging w w w. f o r e c h. c o m Why Pulley Lagging? Prevents slippage-reduces pulley wear Prevents material build up on pulley Reduces chances of mistracking Reduces damage to the
More informationWheels lie at the heart of nearly every material handling
W HEELS lie at the heart of nearly every material handling system. Improperly specified or poor quality wheels can wreak havoc on the simplest task or a highly complicated system. Fast paced technology
More informationThe All New DIAMOND & DIAMOND BT
The All New DIAMOND & DIAMOND BT. Specs The Diamond The Diamond BT Type Badminton Badminton & Tennis Pulling Method Constant Pull Constant Pull Tension Range 10 38 lbs 10 88 lbs Tension Increments 0.1
More informationSeptember 2016 File:- Maintenance-3
Page 1 September 2016 File:- Maintenance-3 Maintenance - Alignment Page 2 Latch Grease & Assembly.. Page 4 Adjusting Latch Relative to the Snare.. Page 4 Product Numbers & Bar Codes..Page 6 Latch Spare
More informationSMALL SIZE. The Smart Chain Choice!
SMLL SIZE COVEYOR CIS he Smart Chain Choice! In Markets round the World. Only from SUBKI. SUBKI Small Size Conveyor Overseas Group Companies SUBKI Group Environmental olicy hilosophy he subaki Group understands
More informationINDUSTRIAL HOSES - ducting and ventilation P-G-EX 1
P-G-EX 1 Black TPE-coated polyester fabric Nylon helix, wear strip profile for abrasion resistance From -40 C up to +150 C (with peaks up to +170 C) Light, flexible hose designed to transfer exhaust fumes
More informationRS Important Notes. Contact. Bicycle Maintenance Stand instructions manual. Warranty Period : 1 year (from the date of your purchase)
Warranty Period : 1 year (from the date of your purchase) RS-1700 Bicycle Maintenance Stand instructions manual (ver.1.2 2016/12) For more details, read the attached "Minoura Limited Warranty Policy" card.
More informationWAVE CYBER HANDLING &
WAVE CYBER PRESSURE VESSEL LIFTING, HANDLING & INSTALLATION INSTRUCTIONS 1 Contents Page Rating, Receiving... 3 Basic Handling Rules... 4 UV Protection... 8 Vacuum Protection Flex Connectors... 9 Flexibility
More informationrugby rugby Millennium Posts Aluminium Posts No.1 Posts No.2a Posts No.3 Posts Heavy Duty Posts Post Protectors Rucking Pads
rugby 87 Millennium Posts Aluminium Posts No.1 Posts No.2a Posts No.3 Posts Heavy Duty Posts Post Protectors Rucking Pads Tackle Bags rugby setting the standard - leading the field Suppliers of Rugby posts
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni ECB page 3-4 Datasheet: uni ECB C EN Plastic Modular Belt Series uni ECB Type
More informationInstruction Manual. Alfa Laval SB Membrane Sample Valve ESE02963-EN Original manual
Instruction Manual Alfa Laval SB Membrane Sample Valve ESE02963-EN2 2016-02 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationGROUTING TOOLS SINCE 1974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL GROUTING TOOLS M2 M3 M4 M5 M6
SINCE 1974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL M2 M3 M4 M5 M6 ANTIABRASION RUBBER GROUT FLOATS FOAM RUBBER GROUT FLOATS FOAM AND STIFF RUBBER GROUT RAKES / SQUEEGEE FLOAT WITH SCRUB PAD / JOINT
More informationMANUAL REEFING SYSTEMS
MANUAL REEFING SYSTEMS Reliability > Performance > Robustness PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/8"- /4" and 00 for 7/32"-3/4", are recommended
More informationCSO/STORMWATER MANAGEMENT. HYDROVEX VHV / SVHV Vertical Vortex Flow Regulator
CSO/STORMWATER MANAGEMENT HYDROVEX VHV / SVHV Vertical Vortex Flow Regulator HYDROVEX VHV / SVHV VERTICAL VORTEX FLOW REGULATOR APPLICATIONS One of the major problems of urban wet weather flow management
More informationHoldUp Plus2. Safety Kit included: See additional instructions for installation. REAR WHEEL TRAY. BASE (1x) lock WASHER (1x) KEY (2x) SAFETY CLIP (1x)
HoldUp Plus2 InsTAll This product on 2" hitch version of the HoldUp Front WHEEL TRAY assembly (1x) REAR WHEEL TRAY assembly (1x) wrench (1x) BASE (1x) bolt (8X) Lock WASHER (8X) Washer (8x) KEY (2x) SAFETY
More informationTHROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS
THROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS MINIMUM PACKAGING QUANTITY Device Type MINIMUM PACKAGING QUANTITY Available Packaging Bulk 13 Ø Tape & Reel Ammo Pack Quantity per
More informationPure, Simple, Fun. Paddlesurf
Pure, Simple, Fun. Paddlesurf Boards All-around These boards form the core of our sport: fun, versatile designs that can take you from entrylevel flat water paddling to playing in the surf. Stability is
More informationDrag Conveyors DRAG CONVEYORS
Drag Conveyors DRAG CONVEYORS PAGE DRAG CONVEYORS.... H-152 FLAT BOTTOM DRAG CONVEYOR.... H-153 H-154 SUPER DUTY DRAG CONVEYOR.... H-155 H-156 ENGINEERING CLASS SPROCKETS.... H-156 MILL DUTY DRAG CONVEYOR...
More informationEvaporator (DX) Freon Applications 1 12 Tons MHF
Evaporator (DX) Freon Applications 1 12 Tons > > Used For small to medium freon applications The Global Leader In Heat Exchange Technology With seven decades of experience and commitment to total client
More informationReplacement parts to fit CHAIN & SPROCKETS CONTENTS. Alphabetical Index Follows
S CONTENTS SECTION S...CS-- through CS--6 Alphabetical Index Follows www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS-I S ALPHABETICAL INDE C
More informationConstitution Instructions
Constitution Instructions This kit will build a 1:48 scale hull for the USS Constitution frigate. The kit contains the following parts. 1/8 deck with laser etched deck lines 1/8 railing Ribs Center keel
More informationNew Product Update - September 2017
New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers
More informationTerminology. 2 MESH WIRE CLOTH (count from center to center of wires) 1/2 INCH OPENING WIRE CLOTH (clear space between wires)
CALENDERING - A rolling operation which flattens the knuckles of wire cloth giving it a smoother surface. CRIMP - Undulations in warp and fill wires which hold each other in place. FILL WIRE - aka SHUTE
More informationBike-Shell Model 301P
Bike-Shell Model 301P NEW design, one piece FRP Composite bike locker NO ASSEMBLY required Specify the 300 Series lockers for the highest customer satisfaction from the no-assembly ready-touse delivery
More informationBuilding a Wind Tunnel
Technical Report TR-5 Building a Wind Tunnel Estes Industries 1963 These reports are published as a service to its customers by Estes Industries, Inc., Box 227, Penrose, Colorado 81240 Building a Wind
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Conveyor Wear Bed T- Chain Guides and Wear Beds Valu Guide rail can be used as a guide or wear strip for wide
More informationA COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32
A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher
More informationCable entries. Contents. Cable entries. Cable entries Introduction C.2 C.1. Standard cable glands - Plastic C.6. Standard cable glands - Brass C.
ontents able entries able entries able entries Introduction.2 Standard cable glands - Plastic.6 Standard cable glands - Brass.9 EM cable glands.15 Standard cable glands - Stainless steel.17 able glands
More informationFull Batten 2 Systems
Full Batten 2 Systems A range of fully integrated batten systems Almost all boats benefit from upgrading to a fully battened mainsail, but which benefits are most important to you, depends upon the type
More informationCar Baby Walker 2-in-1 Baby walker
Car Baby Walker 2-in-1 Baby walker INSTRUCTIONS: Read the instructions carefully before use and keep them for future reference. The child may be hurt if you do not follow these instructions. EN 1273:2005.
More informationSafety Wear. Peace of Mind
Peace of Mind - 331 - T25200 Safety Goggles Protects against flying particles from grinding, chipping and cutting operations Lightweight, soft frame mold High-impact, clear, polycarbonate lens Vertical
More information57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
More informationrondo aluminium components
rondo aluminium components The Rondo Aluminium Ceiling System is an alternative to the Rondo DUO Exposed Grid Ceiling System. Unlike the DUO system, the Aluminium Main Tee to Cross Tee intersection is
More informationSupplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968
Supplementary instructions Rod and cable components for VEGAFEX series 80 Document ID: 44968 Contents Contents 1 Product description 1.1 Extensions... 3 2 Mounting 2.1 General instructions... 6 2.2 Rod
More informationHOVAP SERIES 9600 BASICFLOW PROCESS VALVES INSTRUCTION MANUAL
1 CONTENTS 2 Introduction 2 2.1 Valve use 2 2.2 Application area 2 2.3 Incorrect use 2 3 Safety 2 4 Transport and storage 2 5 Installation instructions 2 5.1 Mounting 2 5.2 Installation into pipework 2
More informationBS Conveyor Chain - Hollow Bearing Pin Chain
S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.
More informationPNEU-THANE K5090, K5094, K5096 Series
REINFORCED AIR & WATER HOSE An extremely lightweight, tough, flexible pneumatic air tool hose that is suitable for a wide range of industrial and construction applications. Tube Clear ether-based polyurethane.
More information