Ammeraal Beltech Modular
|
|
|
- Georgia Horton
- 5 years ago
- Views:
Transcription
1 eraal eltech Modular Innovative belt and cha solutions for every dustry & application
2 ontent uni lex ON 15% Open Radius 1.6 page 3-10
3 Plastic Modular elt Series uni lex ON 15% Open (Radius 1.6) P elt POM-SX W ** Runng direction* *uni-chas reccomends this travel direction. However travel both directions is possible. **Please note that uni lex ON POM-SX blue is not accordg to the standard color quality for blue. Small variations may occur. elt width Permissible tensile force elt material Straight sections POM-SX urve sections P (Nomal) T Sideflexg belt Nomal pitch: 38.1 (1.50 ) Surface type: lat Surface openg: 15% ackflex radius: 50.0 (1.97 ) M. side radius R1.6 x belt width T elt weight elt material POM-SX Size N lbf N lbf kg/m lb/ft *Recoended No. drive sprocket per shaft Number of wear strips (M no.) K K K1400** K K Top view ottom view arry (pcs) Return (pcs) PITH 38.1 MM/1.50 IN SI LXING STNR K General belt tolerance is +0/-0.4% at 23 /73. *Max. Load per rive Sprocket. elt material: POM-SX 2500 N (562 lbf) **lex ON-K1400 is not available with any type of edge accessories 3
4 dge ccessories uni lex ON O Tab (xchangeable Outer Tab) O-Tab xchangeable Outer Tab POM K O When usg the O Tab both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON OO Tab (xchangeable Outer Offset Tab) OO-Tab xchangeable Outer Offset Tab POM K O When usg the OO Tab both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON Tab (xchangeable -Shape Tab) I H G J -Tab ,50 xchangeable -Shape Tab POM-SX W G H I J ,60 When usg the Tab, the width of both sides of the belt width will crease
5 dge ccessories uni lex ON W (xchangeable Wearpart) W Wearpart xchangeable Wearpart POM K O When usg the W both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON W (xchangeable Wearpart losed) Ri xchangeable Wearpart losed W Wearpart K750: POM K Y K1200, K1500, K1800: POM K Ri O K2400: POM K When usg the W both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. dge ccessories uni lex ON R (xchangeable Roller) R material * xchangeable Roller SS When usg the R both sides, the width of the belt will be the same as the uni lex ON 15% open. See page 1. * istance from edge of belt to outside ball bearg. 5
6 Other accessories light I I H Standard belt Height (H) Indent (I) Lk Width size light POM-SX W * K * Please note that uni lex ON POM-SX blue is not accordg to the standard color quality for blue. Small variations may occur. Non Standard material and color: See uni Material and olor Overview. Other accessories lip On light H lip On Rubber lat H lip On Rubber one H H Height (H) Standard materials & colors lip On light POM- O lip On Rubber lat POM- O + Rubber 01 K lip On Rubber one POM- O + Rubber 01 K 6
7 esign Guideles uni lex ON O and O arry W (1.22 ) W (0.12 ) W uni lex ON O Usg the uni lex ON with O-Tab and a slotted wearstrip, the O-Tab will allow the transported products to be ider than the belt. O-Tabs are molded to the belt to ensure cleanability and are preferred for direct food contact. uni lex ON O (xchangeable O-Tab) xchangeable O-Tab system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. Usg a slotted wearstrip the exchangeable O-Tab will track the belt and allow the transported products to be wider than the belt. Resists high curve load at creased speed. esign Guideles uni lex ON O and O W (1.22 ) arry W (0.12 ) W uni lex ON OO (xchangeable Offset O-Tab) xchangeable O-Tab system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. Usg a slotted wearstrip the exchangeable O-Tab will track the belt and allow the transported products to be wider than the belt. Resists high curve load at creased speed. esign Guideles uni lex ON W (0.12 ) W 7
8 esign Guideles uni lex ON W and R W (0.12 ) W (0.67 ) arry W uni lex ON W (xchangeable Wearpart) xchangeable Wearpart system is made of heat and wear resistant material to improve performance between the belt edge and the wearstrip. This Wearpart can easily be replaced. Resists high curve load at creased speed. uni lex ON R (xchangeable dge Roller) uni lex ON with xchangeable dge Rollers reduces friction curves to a mimum makg it very suitable for applications with many curves e.g. static spirals (non rotatg drum) or high speed sideflexg conveyors. esign Guideles uni lex ON W m ø30 m ø1¼ + m 12 + m ½ Overall esign Guideles Layout Guideles m. 1.0 x W W m. 2.6 x W m. 1.6 x W G m. 2.0 x W m. 1.0 x W m. 6.2 x W Runng direction G m. 7.2 x W or m. conveyor dimensions please refer to sketch and diagram. 8
9 Sprocket No. of teeth Pilot ore ore size Overall diameter Pitch diameter Hub diameter imension imension Z Z Z Z Z Z Z Z Z Z Z Sgle row/one way Molded P6 LG Molded sprocket Molded sprocket Non standard material and color: See uni Material and olor Overview. Other sprocket sizes are available upon request Other bore sizes are available upon request uni Retaer Rgs: See uni Retaer Rg data sheet Width of tooth = 9.0 (0.35 ) Width of sprocket = 39.0 (1.54 ) Max. load per sprocket shown does not take bore size to account. Please also ensure that sufficient size shaft is chosen for correspondg load. or correct sprocket position: See uni ssembly Instructions for uni lex ON. or more detailed sprocket formation, contact ustomer Service. 9
10 onveyor elts Seamless elts Modular elts Timg elts xpert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts uni lex ON/ abrication & service eraal eltech Modular /S Hjulmagervej 21 K-7100 Vejle T adm@unichas.com 10
11 ate: onveyor elts Seamless elts Modular elts Timg elts xpert advice, quality solutions and local service for all your beltg needs This formation is subject to alteration due to contuous development. eraal eltech will not be held liable for the correct use of the above stated formation. This formation replaces previous formation. ll activities performed and services rendered by eraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operatg companies. Transmission elts abrication & service Global Headquarters: eraal eltech Holdg.V. P.O. ox 38, 1700 Heerhugowaard The Netherlands T fo@aeraalbeltech.com
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni ECB page 3-4 Datasheet: uni ECB C EN Plastic Modular Belt Series uni ECB Type
Belt strength. Available the belt. (kg/m)
SERIES E50 FLAT TOP Eurobelt Series E50 Flat Top, due to its closed surface, completely flat and smooth, avoids any damage and overturn in the product, as well as the resulting line blockage. It is the
SERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
![Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]](/thumbs/94/120596583.jpg "Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]")
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
SERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
HabasitLINK Sprocket series M5100
M = Modular belts Belt pitch S = sprocket one-piece; Z = split sprocket Number of teeth Shaft size M 51 S 12 60 Q 6 Sprocket availability Type Number of teeth Shaft type: Q = square shaft; R = round shaft
HabasitLINK Sprocket series M1200
M = Modular belts Belt pitch S = sprocket one-piece; Z = split sprocket Number of teeth Shaft size M 1 S 4 5 Q 6 Sprocket availability Type Number of teeth Shaft type: Q = square shaft; R = round shaft
PROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 7 Straight running belts 40 mm (1.57 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
Nitro. Quality Power Transmission Products Division of Belarus Tractor International
Division of Belarus Tractor International Quality Power Transmission Products 800-356-2336 Table of Contents Standard ANSI Single Strand: Page 3 Double Strand: Page 4 Triple Strand: Page 5 Quadruple Strand:
Rexnord 815 TableTop Chain Straight Running
Prefix S SS SSB 815 Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 2-1/4 2. 57. 2 - - 1.43 2.12 2-5/8 2.63 66. 7 - - 1.60 2.37 3-1/4 82. 6 - - 1.84 2.73 4 4.00 101. 6 - - 2.14 17 4-1/2
2000-SERIES MODULAR BELTS
2000-SERIES MODULAR BELTS The 2000-series belt is made for heavy duty applications. The pitch is 2 inch. BENEFITS Heavy duty drive The heavy duty positive drive construction provides optimum belt engagement
STRAIGHT RUNNING CHAIN. Sideflexing steel gripper chains
812 815 STRAIGHT RUNNING CHAIN Series 1874 GV Sideflexing steel gripper chains 1874 GV GRIPPER CHAINS with vulcanized rubber pads 9.5 3.1 23.8 31.8 SC 56.5 21 17 7 19.05 19.05 Ø 5.08 Ø 11.91 14.35 25 12.7
Q Taper Sprockets (For QD Bushings) Mfg. No. Specifications: 40 JA 19 = #40 Chain, JA Bushing Type, 19 Tooth Sprocket
Q Taper Sprockets (For QD s) 40 JA 19 = #40 Chain, JA Type, 19 Tooth Sprocket 64.00001 40JA15 64.00004 40JA16 64.00007 40JA17 64.00010 40JA18 64.00013 40JA19 64.00016 40SH20 64.00019 40SH21 64.00022 40SH22
uni NTB Engineering Guideline
www.unichains.com/bakery www.ammeraalbeltech.com Table of Contents.... Introduction.... 3 Transfer edges... 4 Nose bar transfer... 4 Roller transfer... 5 Knife edge transfer... 5 Driving the belt... 6
CHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
Cost reduction for conveyor systems through self-adjusting chain wheel
Cost reduction for conveyor systems through self-adjusting chain wheel Karl Herkenrath Current energy costs let expenses for the production and manufacturing of round link chains reach a very high level.
OMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
BS Conveyor Chain - Hollow Bearing Pin Chain
S onveyor Hollow earing in This chain has all the bearing pin hollow. The hollow bearing type chain gives easy facility for fixing attachments to outer links by bolting through the hollow bearing pins.
New Ne w sideflexing BelTs 2555 series
NE 09e New sideflexing BELTS 2 series 1 SIDEFLEXING BELTS PRODUCTION RANGE SERIES MIN. RADIUS/IDTH AVARAGE RATIO PATHS GUIDE SYSTEM APPLICATIONS BELT MATERIAL 2 2T 1, 1, Bidirectional S Bidirectional S
U.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
Chain Drives ELEMEN MESIN II
Chain Drives ELEMEN MESIN II Introduction Belt and rope drives slipping may occur To avoid slipping Chains The chains are made up of number of rigid links which are hinged together by pin joints in order
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from hardened, carbon steel or corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D
3/16 Pitch Silent Chain P R E C I S I O N E N G I N E E R E D Ramsey 3/16 Pitch Chain Constructed from corrosion resistant, 304 stainless steel, Ramsey 3/16" pitch chain and sprockets are designed to bring
P R O D U C T T E C H N I C A L B U L L E T I N
ASHORH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C E C H N I C A B U E I N CEARAC BE AND DRIVE SYSEM (U.S.
Precision Power Transmission Roller Chains, Attachments, and Sprockets
ASME B29.1-2011 (Revision of ASME B29.1 and Partition From ASME B29.100-2002) Precision Power Transmission Roller Chains, Attachments, and Sprockets AN AMERICAN NATIONAL STANDARD ASME B29.1-2011 (Revision
Chain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
Rexnord 4705 MatTop Chain Assembled-to-Width
Prefix W WLT BLT MR AS R FR HS W BSM P LUV HUV BWR WX TC Cha 4705 Cha Inforation Cha Capacity Nuber of Sprockets ft of width of width 0% 80% 80% 100% Blue Melt AntiStatic Red Flae Retardant Heat Stabilized
DualDrive. Technical Manual. The Next Step in Belting
DualDrive Technical Manual The Next Step in Belting DualDrive Technical Manual Table of Contents Page 1. Introduction 3 2. Technical Data 4 Volta M Material DualDrive Belts & Fabrication Guidelines 4-5
Rexnord 815 TableTop Chain
815 DIRECTION OF TRAVEL Drawing 0.12 in (3.1 mm) Overall 1.69 in (42.9 mm) Guide Clearance 1.75 in (44.4 mm) Rexnord 815 TableTop Photo shows 815 TableTop in Stainless Steel (SS) material. Information
Axial piston pumps type PVPY-C (-R, -L) variable displacement, with mechanical controls obsolete components - availability on request
www.atos.com Table TA60obs/E Axial piston pumps type PVPY- (-R, -) variable displacement, with mechanical controls obsolete components - availability on request PVPY are variable displacement axial piston
ISO 1977 INTERNATIONAL STANDARD. Conveyor chains, attachments and sprockets. Chaînes de manutention, plaques-attaches et roues dentées
INTERNATIONAL STANDARD ISO 1977 Second edition 2006-08-15 Conveyor chains, attachments and sprockets Chaînes de manutention, plaques-attaches et roues dentées Reference number ISO 1977:2006(E) ISO 2006
DICTATOR Spring Rope Pulleys for the Closing of Sliding Doors
DICTATOR for the Closing of Sliding Doors Spring rope pulleys are a simple, efficient and cost-effective closing device for sliding doors. During the opening of the door the internal spring is tensioned
Rexnord and Link-Belt Engineered Steel Chains I Catalog. Conveyor, Elevator & Drive Chains
Rexnord and Link-elt ngineered Steel hains I atalog onveyor, levator & rive hains ontents Introduction Introduction 2- Special pplication hain Special pplication hain 4-9 ngineered Steel hain ngineered
Available Sizes (Both width and height are available in the 10mm unit.) Pull Cord Type (with limit stopper) 300~2000mm 400~2000mm 400~2000mm 6m 2
ROLL SRN L R ROLL SRN L R STNR TYP vailable Sizes (oth width and height are available in the 10mm unit.) Method Max. rea Ratio of : Pull ord Type Pull ord Type (with limit stopper) 300~00mm 400~00mm 400~00mm
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
TSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance
TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing
Sprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
OPTIPOW 105 OPTIPOW 105 ; MAIN PARTS. Our Ref: PSE, Bernt Andersson
Page 1 (6) Our Ref: PSE, Bernt Andersson OPTIPOW 105 OPTIPOW 105, the compact pulse valve for the Optipulse fabric filters of different types: is a result of many years of experiences within the fabric
OMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION Ramsey Silent Chains For Power Transmission Ramsey Products specializes in the design, manufacture, and application of silent chain drives, also
pneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
A L T R A I N D U S T R I A L M O T I O N. Synchronous Drives
A L T R A I N D U S T R I A L M O T I O N Synchronous Drives SYNCHRONOUS SPROCKETS & BELTS SECTION C1 C1 1 FEATURES OF SYNCHRONOUS BELT DRIVES Positive Slip-Proof Engagement Because the teeth of the Synchronous
Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 606 Fourth edition 2015-08-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de
Sprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
Flattop. Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1
Flattop Engineering Manual I Pasteurizers, Warmers, Coolers Version 1.1 Safety Considerations PRODUCT SAFETY: Products designed and manufactured by Rexnord are capable of being used in a safe manner; but
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed
TRP 63 / TRP 72 / TRP 93 / TRP 110 CENTRE LATHES
TRP 63 / TRP 72 / TRP 93 / TRP 110 CENTRE LATHES BASIC PARAMETERS Max. torque on spindle: Max. weight of workpiece between centres: 5,600 Nm 6 tonnes Turning length: 1,000 to 16,000 mm In their basic version
Steel Adaptors and Idler Sprockets
Steel Adaptors and Idler Sprockets Detachable Hubs Hub Ref. Min. Bore Max. Bore A B C D E F H App. Wt. D30 8 20 55 45 30 20.0 4.2 4 3.0 0.15 D40 10 26 70 58 40 25.0 5.2 5 5.2 0.32 D50 14 32 80 67 50 32.0
INFORMATION SHEET: SERIES GRC PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRC PARALLEL S IMPORTANT INFORMATION DO NOT DISCARD! Use this formation sheet to assist with gripper stallation and setup. File with matenance or mache documentation. TO ORDER
SMALL SIZE. The Smart Chain Choice!
SMLL SIZE COVEYOR CIS he Smart Chain Choice! In Markets round the World. Only from SUBKI. SUBKI Small Size Conveyor Overseas Group Companies SUBKI Group Environmental olicy hilosophy he subaki Group understands
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
PLATE TOP AND GRIPPER CHAINS
PLTE TOP ND GRIPPER CHINS Rexnord has a wide variety of Plate Top and Gripper chains. The roller chain based Plate Top is developed for greater ing capacity and permits even higher speeds and longer runs
Chain Drives. Chain Drives 759 C H A P T E R
Chain Drives 759 C H A P T E R 21 Chain Drives 1. Introduction. 2. Advantages and Disadvantages of Chain Drive over Belt or Rope Drive. 3. Terms Used in Chain Drive. 4. Relation Between Pitch and Pitch
OMS, OMT and OMV Orbital Motors. Technical Information
, OMT and OMV Orbital Motors Technical Information , OMT and OMV A Wide Range of Orbital Motors Revision History Table of Revisions Date Page Changed Rev ED Dimensions changed EF A Wide Range of Orbital
The SAG type flat, rubber-steel, balance ropes
ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines
Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
Asphalt Batch Plant Processing
Asphalt atch Plant Processing ngineered for Asphalt Operations www.ustsubaki.com Asphalt Chain www.ustsubaki.com Asphalt is tough! ard aggregates, shock loads, intense heat, and almost around-the-clock
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION
INVERTED TOOTH Chains and Sprockets FOR POWER TRANSMISSION Ramsey Silent Chains For Power Transmission Ramsey Products specializes in the design, manufacture, and application of silent chain drives, also
Supplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968
Supplementary instructions Rod and cable components for VEGAFEX series 80 Document ID: 44968 Contents Contents 1 Product description 1.1 Extensions... 3 2 Mounting 2.1 General instructions... 6 2.2 Rod
ALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
Diamond Oil Field PRoduct Guide Agriculture Product Guide
Diamond Oil ield oduct Guide Agriculture roduct Guide able of ontents Diamond Series Standard Series 4 Heavy Series 4 Double 5 ower ransmission hain 5 onveyor hain 5 Sapphire Series Standard Series 6 Heavy
Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³
ï³ î³ îòë³ í³ ì³ ë³ ê³ Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³ Õ¹ñ³ Í ±µ» î³ ì³ ë³ ê³ è³ ïð³ ïî³ Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST095N ST120N ST0N -9 - -
Conveyor system X85 - links and chains
Conveyor system X85 - links and chains Each link kit contains 10 links, 10 plastic pivots, and 10 stainless steel pins, unless otherwise specified. Plain chain Material abbreviations: see page. X5 X5H
Dual Sprocket Conveyor Chain
SACEA Strategic Theme 2015 The relationship between man and machine and compliance to changing legislation South African Colliery Engineers Association Technical Symposium Secunda Club - Thursday 25 June
APPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
8 page. //: Belt Line Specification SHIMANO ALFINE 8 SG-S500/SG-S mm BELT LINE 1 OF 2 05
//: Belt Line Specification SHIMANO ALFINE 8 MODEL NUMBER SG-S500/SG-S501 SHEET REV 1 OF 2 05 10.5 MM FLANGE-TO-FLANGE DISTANCE FROM REAR SPROCKET INNER FLANGE SURFACE TO FRONT SPROCKET INNER FLANGE SURFACE
RAUBIOXON PLUS Pipe Aerator
RAUBIOXON PLUS Pipe Aerator Technical Information 316 TI-E Technical modifications reserved Contents Page 1. Areas of application 1 2. RAUBIOXON PLUS pipe aerator 2 2.1 Components 2 2.2 Material property
CATALOGUE
www.rotom.ca TOGU irdex Fan lades pplications Unitary ir onditioning eat Pumps and Ventilating 2 lade - eavy uty ondenser Type - Interchangeable ub Rotation iameter(") Pitch( ) lade epth (") 93-27702 W
Roller Link Plate Pin Link Plate Roller Bushing Pin. Closed type Connecting Link
chain consists of roller links and pin links in series. RIVEE CHAIN COERE CHAIN chain ARS & LINKS. Link late in Link late Bushing in CONNECION OF ROLLER CHAIN Connecting Link Offset Link Spring clip type
ENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
OMS, OMT and OMV Orbital Motors. Technical Information
OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV A Wide Range of Orbital Motors F300540.eps F300030.TIF A wide range of orbital motors Sauer-Danfoss is a world leader within production
Features. Points to observe during use. SRT SRTB SRT-C Ratchets Pawls. Gears. Spur. Helical. Gears. Internal. Gears. Racks
SRT SRTB Features Characteristics of and A simple structure used to restrict the rotational direction in one-way. The tips of pawls and the teeth of ratchets are induction hardened and therefore have superior
BUCKET ELEVATORS 1 BUCKET ELEVATORS. Technical Data for Bucket Elevators (BW)
BUCKET ELEVATORS 1 BUCKET ELEVATORS for Bucket Elevators (BW) www.amf-bruns.com BUCKET ELEVATORS 3 Contents Overview of Belt Bucket Elevators Overview of Chain Bucket Elevators BW 160 BW 200 BW 250 BW
Special instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805
Technical Service Instructions SI-5VB0E t RD-M805 / RD-M800 Rear derailleur Special instruction of installation for SAINT FH-M800/RD-M800 and FH-M805/RD-M805 A hub axle is an essential component for the
Rubber Lining, Conveyors & Ceramics
Wenco Fabric Belts Wenco has always focused on meeting the needs of the bulk material handling industry by supplying various high quality types of conveyor belts to the industry. he carcass consists of
Shift Chain. ST - N : Normal type. ST - E : Enclosed type. ST - S : Skid type ST044 E ST055 E ST072E ST095E ST120E ST150E
Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST09N ST0N ST0N -9 - - - -1-19 ST044 ST0 ST02 ST09 ST0 ST0-2 -29-1 - - - ST044 S -4-1 www.cpsystem.co.kr ST -
Design and Analysis of Rotary Lawn Mower
Design and Analysis of Rotary Lawn Mower Vivek P Revi Vishnu N V Akhil K A Rohith P Kevin Rozario Abstract- KAMCO Industries, Athani, India is a reputed industry undertaken by Kerala state government producing
(1) Size (Overall dimensions: H W) (2) Bending radius. In case of ordering, please apply Model code in the following chart. H HF K a.
Compared with conventional products, improved durability of cables, hoses, and components.(special resins reduce wear and tear by one-fourth to one-fifth of conventional products.) In addition to opening
2-port and 3-port seat valves, PN16
s 4 47 VVI47 VXI47 CVTIX 2-port and 3-port seat valves, PN6 with internally threaded connections VVI47.. VXI47.. ronze valve body CC49K (Rg5) DN 5...5 k vs 2.5...4 m 3 /h Internally threaded connections
HAUGHTON / PEELLE UNITS
Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 HAUGHTON / PEELLE UNITS TABLE OF CONTENTS HAUGHTON COMB
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
Conveyor system XL - links and chains
Conveyor system XL - links and chains Conveyor system XL - links and chains Each link kit contains 10 links, 10 plastic, and 10 stainless steel pins, unless otherwise specified. Material abbreviations:
Reservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
Replacement parts to fit CHAIN & SPROCKETS CONTENTS. Alphabetical Index Follows
S CONTENTS SECTION S...CS-- through CS--6 Alphabetical Index Follows www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS-I S ALPHABETICAL INDE C
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
FRIGOFLEX is an innovative system designed for the conveyance of R134, R404, R407, R410 refrigerant gases and other specific fluids.
FRIGOFLE is an innovative system designed for the conveyance of R14, R404, R407, R410 refrigerant gases and other specific fluids. This system consists of a flexible multilayered polymeric pipe and a series
Forestry Chain. Forestry
sec Forest Forestry 11/19/08 9:57 M Page 158 Forestry Renold Jeffrey ngineering lass s for the forestry and paper industries are built to move materials in demanding conditions. Our 81X onveyor s and Welded
Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
MADE-TO-ORDER SERIES CHAIN
Specialty/Made-o-Order Attachments Standard Straight and Bent Attachment Chain MAE-O-OE SEIES CAIN S iamond M-35, SA1 S1 (one hole) M-1, S1 S2 (one hole) imensions in Inches WI WO PIC S2 S1 B2 B1 A1 1
SELF-ADJUSTING TENSIONER. Chain Tensioner Chain Damper E B E R T. Rolls elastically. Self-adjusting Automatic Reversible mode Maintenance-free
SELF-ADJUSTING TENSIONER Chain Tensioner Chain Damper Rolls elastically Self-adjusting Automatic Reversible mode Maintenance-free No sprockets One second fitment E B E R T Minimum structure, universal
Chains. Section Contents
s Section ontents ROLLR INS eneral Description...250 Ordering Information...251 Multi-Strand Selection harts...252 Transmission Series...253 onveyor Series...253 eavy Series...253 ngineering...254-257
Profile Design Recommendations
Profile Design Recommendations Gates Mectrol Profile Design 1 Over one thousand profile designs are available from Gates Mectrol s extensive mold inventory. Visit the Gates Mectrol Profile Selector Guide
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
Drive and Conveyor Chains Catalog. Rexnord and Link-Belt Roller Chains
rive and onveyor hains atalog Rexnord and Link-elt Roller hains Section Index escription Page Introduction Introduction -2 rive hains Standard Roller hains -1 SU and H Series hains -4 ouble rive hains
ISO 606 INTERNATIONAL STANDARD. Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
INTERNATIONAL STANDARD ISO 606 Third edition 2004-03-15 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Chaînes de transmission de précision à rouleaux
Casing Spacer Technology Leaders
Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,
17J Third Edition, January 2008 Specification for Unbonded Flexible Pipe
API Specification 17J Third Edition, January 2008 National Adoption of ISO 13628:2006(Identical) Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded
Mechanical Wind Recorder
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021186/11/06 Mechanical Wind Recorder 4.3900.20.000 ADOLF THIES GmbH & Co. KG Hauptstraße 76 37083