Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³

Transcription

1 ï³ î³ îòë³ í³ ì³ ë³ ê³ Í º ½ ²óÒ± ³ ² ¾ ½ ²óÒ± ³ Õ¹ñ³ Í ±µ» î³ ì³ ë³ ê³ è³ ïð³ ïî³

2

3 Shift hain ST - N : Normal type ST - : nclosed type ST - S : Skid type ST044 N ST0 N ST02N ST095N ST120N ST0N ST044 ST0 ST02 ST095 ST120 ST ST044 S

4 ST - S : nclosed Skid type ST - RS : Roller Skid type ST - RS : nclosed Roller Skid type ST044 S ST02S ST095S ST120S ST044 RS ST02RS ST095RS ST120RS ST0RS ST044 RS ST02RS ST095RS ST120RS P SYSTM O.,LT. -2

5 Shift hain - Normal type General information Item Value Material PS-mid(P+G), RoHs Speed m s cceleration m s2 Temperature -0 ~+0 Special production S, UV ertificate, TX(x) alculation table Item Length of able hain ending Radius The biggest able inserted The biggest Hydraulic Hose inserted Value L = ½ X LS + LP Multiply 8~ and the biggest cable Multiply ~20 and the biggest hose Shift hain N Type imension table Pitch ST 044N 44 ST 0N ST 02N 2 ST 095N 95 ST 120N 120 ST 0N 0 ending RadIus (R), 0, 90, 120, 0 5, 5,,, 0, 2,, 120, 1,, 2, 5, 0,, 20, 280, 0 0,, 2,,, 0, 0 205, 05, 5, 5, 05 Weight kg/m Speed m/s Temperature -0 ~ +0-0 ~ +0-0 ~ +0-0 ~ +0-0 ~ +0-0 ~ +0 Size rame type Sectioncomposition (imensions in mm) Ordering ST 044N.. R120 / -00L : ST Q ty(set) Length(mm) racket Type : ree nd racket T : Tie Wrap ST : System Tie Wrap 1, 2 and : ST0N ending radius Inside width Normal type (N) Shift hain racket type - ST044, ST0, ST02, ST095, ST120 ST 044N, 0N - ST0 Steel nd racket (S) 1 ixing nd racket () ST 0N 2 ST 02N, 095N, 120N or ST0N, its end parts of cable chain being fixed are used with steel bracket, and it is possible to be installed 1, 2, types of brackets. -

6 pplication of Shift hain - Shift hain can be applied to all kinds of machine tools and factory lines. ST 044N pplication: Machine tool Location: Italy Remark: Verious stroke and direction ST 120N pplication: Robot arriage line Location: hina Remark: Stroke meters ST 095N pplication: Steel manufacturing line Location: Korea Remark: Verious stroke and direction ST 0N pplication: Machine tool Location: Japan Remark: Side mounting ST 02N pplication: Nylon loth cutting machine Location: Italy Remark: Stroke 2.5 meters ustomized Shift hain Shift hain is designed to be able to move in upper, lower and diagonal directions according to machine's movement. hanging a different ending Radius value at the point that the chain movement turn other sides can create the bending radius or the reverse bending radius for the direction that you need, so the machine can move in zigzag direction. Shift hain can be used for special usage such as a zigzag chain, and has an excellent installation scalability in any hazard environment for cable protection with the general chain. If you need special chain installation, please contact our R& center. P SYSTM O.,LT. -4

7 Shift hain - Normal type Part of Shift hain Normal type ❶ Side and (S) unit that connects each side band and between them R isinserted to strengthen clamping force. ❷ ending Radius Unit (R) unit that inserted between each side band. There are supporting points to create durability. ❸ ivider (V-S, M, R, T) unit that divides inserted cables horizontally. ❹ Separator (SP) unit that divides inserted cables vertically to prevent twisting and breaking problem. ❻ rame Pin (P) The connecting pin for preventing the breakaway of rame connected at Side and, combining and fixing the rame and Side and. or Shift chain(st)02n, 092N, 120N, 0N type, one side of the frame is fixed by inserting a fixing pin to prevent frame open, which caused by any external impact. lso, in case of ST044N, ST0N type, an open side of the frame is fixed by Hook-type frame. ❼ ree nd racket () unit that connects at last side band (left&right). It can be fixed stronger using steel washers. ❽ Tie Wrap (TW) unit that ties cables to maintain straightness of them. It can be assembled to bracket directly or installed separately from bracket. ❺ rame (Hinged Type) (R) Hinged-type frame, open one side, supports connection of both side of side band and have tongue and groove system plate to secure the position of the divider on the frame. ❾ System Tie Wrap (STW) System-Tie Wrap has to be assembled on fixing and moving point of bracket and can be assembled wthout any tie wrap plate. This tie wrap is used to stay the cables on several floors prevent the cables from being twisted and it can also be assemble without any tools or bolt. This tie wrap has two types, one is to assemble inside bracket the other one is outside. -5

8 ssembly procedure of Shift hain Normal type The assembling process of Shift hain N-Type is like below and users must use rubber hammer with careful combination of ivider and Separator. e careful of different assembling process depending on product specification such as ST044N, 0N Type, ST02N, 095N, 120N Type, ST0N Type etc. 1 Insert R unit to each side band, connect the side bands as many as you need, then do the same process to the other side of side band. 5 ix the separator and divider patterns to the bottom-side frames as needed. 2 ssemble the end brackets onboth ends using the same method. or ST0N, assemble steel brackets on both ends. ttach frames to one side groove on the side band, and then the other side. ST044N, 0N frame type. ttach frames to one side groove on the side band, and then the other side. ST 044N, 0N are Hinge Type or Hook Type without frame pin. Insert frame pins to secure the frames and complete carrier. (ST02N, 095N, 120N, 0N are applied with frame pin, and ST044N, 0N are Hinge Type or Hook Type without frame pin.) 4 or ST02N, 095N,120N, and 0N, connect the pin of separator in hole of divider after inserting separator in hole of divider. or ST044N and ST0N, separator fixing pins are not used. 8 ssembled Shift hain N-Type is assembled. P SYSTM O.,LT. -

9 Shift hain - Normal type Part list of Shift hain Normal type omposition of able chain(standard) = Side band(rh) + rame + Side band(lh) + ending radius Unit + ree end bracket M divider(normal divider) should be applied every second frames to make a section composition. Please refer to below part list and description to understand composition of cable chain. Model ST044N lassification Part number escription SI N NING RIUS ST S044N/(LH) ST- S044N/(RH) ST- R044.R,0,90,120,0 Left side band of ST044N Right side band of ST044N ending radius unit for side band RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP sb-r/m. sb-r/m. sb-r/m. sb-r/m.5 sb-r/m. sb-r/m. sb-r/m.0 sb-r/m.15 sb-r/m. ST-044N/S sb- V028/M sb- V028/S S- SP/M. S- SP/M. S- SP/M.5 S- SP/M. S- SP/M. S- SP/M.0 S- SP/M.15 S- SP/M. S TW0/0R. S-TW0/0R. S- TW0/0R.5 S-TW0/0R. S- TW0/0R. sb V028/W S TW.028 rame, mm rame, mm rame, mm rame, 5mm rame, mm rame, mm rame, 0mm rame, 15mm rame, mm nd bracket of ST044N Normal divider To fix separstors at the both side section Separator, mm Separator, mm Separator, 5mm Separator, mm Separator, mm Separator, 0mm Separator, 15mm Separator, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 5mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket Model ST0N Model ST02N lassification Part number escription SI N NING RIUS ST S0N/(LH) ST- S0N/(RH) ST R0.R5,5,,,0, Left side band of ST0N Right side band of ST0N ending radius unit for side band RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP SYSTM TI WRP sb-r/m. sb-r/m. sb-r/m. sb-r/m.5 sb-r/m. sb-r/m. sb-r/m.0 sb-r/m.15 sb-r/m. ST-0N/S sb- V0/M sb- V0/S S- SP/M. S- SP/M. S- SP/M. S- SP/M.5 S- SP/M. S- SP/M. S- SP/M.0 S- SP/M.15 S- SP/M. S-TW0/0N. S-TW0/0N.5 S-TW0/0N. S-TW0/0N. S-TW0/0N.0 S-TW0/0N.15 S-TW0/0N. sb V0/W S TW.0 rame, mm rame, mm rame, mm rame, 5mm rame, mm rame, mm rame, 0mm rame, 15mm rame, mm nd bracket of ST0N Normal divider To fix separstors at the both side section Separator, mm Separator, mm Separator, mm Separator, 5mm Separator, mm Separator, mm Separator, 0mm Separator, 15mm Separator, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 5mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 0mm Tie wrap for end bracket to fix cables, 15mm Tie wrap for end bracket to fix cables, mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket lassification Part number escription SI N NING RIUS RM PIN ST- S02N/(LH) ST-S02N/(RH) ST R0.R5,5,,,0, S- P/S1 Left side band of ST02N Right side band of ST02N ending radius unit for side band rame pin sb-r0. rame, mm sb-r0.5 rame, 5mm sb-r0. rame, mm sb-r0. rame, mm sb-r0.1 rame, 1mm sb-r0.0 rame, 0mm RM sb-r0.15 sb-r0.15 rame, 15mm rame, 15mm sb-r0.190 rame, 190mm sb-r0. rame, mm sb-r0.2 rame, 2mm sb-r0.2 rame, 2mm sb-r0. rame, mm R N RKT ST- 02N/S sb- /WH0 sb- V0/M nd bracket of ST02N Steel washer for end bracket Normal divider IVIR sb- V0/S sb- V0/T sb- V0/TP To fix separstors at the both side section T divider T divider pin SPRTOR sb- SP/0.0 SP PIN0 S-TW Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm S-TW5 Tie wrap for end bracket to fix cables, 5mm TI WRP S-TW Tie wrap for end bracket to fix cables, mm S-TW Tie wrap for end bracket to fix cables, mm S-TW0 Tie wrap for end bracket to fix cables, 0mm sb V0/W S TW.0 ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket -

10 P SYSTM O.,LT. -8 ST095N SI N NING RIUS RM PIN RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP ST- S095N/(LH) ST-S095N/(RH) ST R0.R5,5,,,0, S-P/S1 sb-r00.5 sb-r00. sb-r00. sb-r00.0 sb-r00.15 sb-r sb-r00. sb-r00.20 sb-r00.2 sb-r00. sb-r00. sb-r00.0 ST-095N/S sb-/wh00 sb-v00/m sb-v00/s sb-v00/t sb-v00/tp sb-sp/0.0 SP-PIN00 S-TW S-TW5 S-TW S-TW S-TW0 sb V00/W S TW.00 Left side band of ST095N Right side band of ST095N ending radius unit for side band rame Pin rame, 5mm rame, mm rame, mm rame, 0mm rame, 15mm rame, 190mm rame, mm rame, 20mm rame, 2mm rame, mm rame, mm rame, 0mm nd bracket of ST095N Steel washer for end bracket Normal divider To fix separstors at the both side section T divider T divider pin Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 5mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 0mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket Model lassification Part number escription ST120N SI N NING RIUS RM PIN RM R N RKT IVIR SPRTOR TI WRP SYSTM TI WRP ST- S120N/(LH) ST-S120N/(RH) ST-R120.R0,, 2,,, 0, 0 S-P/S2 ST-120N/S sb-/wh05 sb-v05/m sb-v05/s sb-v05/t sb-v05/tp sb-sp/0.0 SP-PIN05 S-TW S-TW5 S-TW S-TW S-TW0 sb V05/W S TW.05 Left side band of ST120N Right side band of ST120N ending radius unit for side band rame Pin rame, 5mm rame, mm rame, 1mm rame, mm rame, 0mm rame, 15mm rame, mm rame, 2mm rame, 2mm rame, 290mm rame, mm rame, mm rame, 0mm rame, 4mm rame, 0mm rame, 5mm rame, 00mm nd bracket of ST120N Steel washer for end bracket Normal divider To fix separstors at the both side section T divider T divider pin Separator, 0mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 5mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 0mm ivider for fixing cables at end bracket System tie wrap to arrange for cables right after moving bracket or fixing bracket Model lassification Part number escription sb-r05/.5 sb-r05/. sb-r05/.1 sb-r05/. sb-r05/.0 sb-r05/.15 sb-r05/. sb-r05/.2 sb-r05/.2 sb-r05/.290 sb-r05/. sb-r05/. sb-r05/.0 sb-r05/.4 sb-r05/.0 sb-r05/.5 sb-r05/.00 ST0N SI N NING RIUS RM PIN RM STL N RKT IVIR SPRTOR TI WRP ST- S0N/(LH) ST-S0N/(RH) ST-R0.R205,05,5,5,05 S-P/S2 ST-S0N/1~2~ sb-v05/m sb-v05/s sb-v05/t sb-v05/tp sb-sp/00.00 SP-PIN S-TW S-TW5 S-TW S-TW S-TW0 Left side band of ST0N Right side band of ST0N ending radius unit for side band rame Pin rame, 5mm rame, mm rame, 1mm rame, mm rame, 0mm rame, 15mm rame, mm rame, 2mm rame, 2mm rame, 290mm rame, mm rame, mm rame, 0mm rame, 4mm rame, 0mm rame, 5mm rame, 00mm Steel end bracket of ST0N Normal divider To fix separstors at the both side section T divider T divider pin Separator, 00mm Separator pin to fix Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 5mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, mm Tie wrap for end bracket to fix cables, 0mm Model lassification Part number escription sb-r05/.5 sb-r05/. sb-r05/.1 sb-r05/. sb-r05/.0 sb-r05/.15 sb-r05/. sb-r05/.2 sb-r05/.2 sb-r05/.290 sb-r05/. sb-r05/. sb-r05/.0 sb-r05/.4 sb-r05/.0 sb-r05/.5 sb-r05/.00

11 ST 044N Hinge hook type Shift hain alculation of the chain length Load diagrams selfsupporting length [ L = Ls 2 + Lp ] 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max 2.0m Vertical curve below = max m Side Mounted, Unsupported = max 1.0m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Lf Ls/2 Ls Ls/2 Vertical with curve below 44 H: 2R+ Hs: Hs H+0 ending Radius (R) Lp Loop Length Lf Loof Projection H Moving Height Horizontal application mounted on its side (imensions in mm) -9

12 hain Type ST 044N S-TW.00.() Width (Outer) Height (Outer) rame Height (Inner).(M5 olt Holes) -Ø5.(M5 olt Holes) -Ø5.(M5 olt Holes) S-TW.0.() -Ø5.(M5 olt Holes) -Ø5.(M5 olt Holes) -Ø5.(M5 olt Holes) S-TW.00.() S-TW Ø.5(M OLT Holes) les) S-TW.00.() 4 -Ø5.(M5 olt Holes) S-TW.0.() Ø.5(M OLT Holes) 59 hain cross section ree end bracket Moving point hain Type 4 Width(Outer) Height(Outer) ST 044N -Ø5.(M5 olt Holes) Weight kg/m ST044 V-M (imensions in mm) ST044 V-M S-TW ST044 V-M ❸ sb-v028/m ❺ sb-v028/w ront point S-TW.0.() ST044 V-M ST044 V-S ST044 V-T Ø5.(M5 4.2 olt Holes) 2-Ø5.(M5 olt Holes) 2-Ø5.(M5 olt Holes) Ø5.(M5 olt Holes) rame Ø5.(M5 olt Holes) Hole Type Height(Inner) M. olt hole width S-TW.0.() System S-TW.0.() tie wrap (STW) Ø.5(M OLT Holes) S-TW.0.() ixing point ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). ❶ sb-v028/s ❷ sb-v028/m1 M5 olt Holes (imensions in mm) 2-Ø5.(M5 olt Holes) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. ividers(v) ➊ 2-Ø5.(M5 olt Holes) ➋ ➍ ST044 V-S 4 ST044 V-S Separators(SP) hain Type ST 044N S-TW.0 Tie wrap (TW) ST044 V-W ❹ sb-v028/t. 5 8 Ordering NO. S-SP/M. S-SP/M. S-SP/M. S-SP/M.5 S-SP/M. S-SP/M. S-SP/M.0 S-SP/M.15 S-SP/M. S-TW.0 9. ➎ S-TW ST044 ST044 V-M V-T System Tie wrap ST044 V-S 9. 4 ST044 V-T 20~mm S-TW (imensions in mm) mm 4 rame sb-v0/w ➌ ront point Ø.5(M OLT Holes) Upper side point Ø.5(M olt Holes) Side point ttached to racket hain Type S-TW.028.() 59 ST 044N Ordering No. S-TW.028. S-TW.028. S-TW.028. S-TW S-TW.028. S-TW.028. S-TW S-TW S-TW.028. S-TW.028.() S-TW.028.() rame Hole Type M olt Holes (imensions in mm) hain Type Ordering No. ST 044N S-TW0/0R. S-TW0/0R. S-TW0/0R. S-TW0/0R.5 S-TW0/0R. S-TW0/0R (imensions in mm) P SYSTM O.,LT. - S-TW.028 sb-v028/w

13 ST 0N Hinge hook type Shift hain alculation of the chain length Load diagrams selfsupporting length [ L = Ls 2 + Lp ] 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max 1.0m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Lf Ls/2 Ls Ls/2 Vertical with curve below H: 2R+ Hs: Hs H+ ending Radius (R) Lp Loop Length Lf Loof Projection H Moving Height - Horizontal application mounted on its side (imensions in mm)

14 S-TW.05.() s) 4-Ø(M OLT Holes) S-TW.00.() 8.98 hain Type Ø.5(M OLT Holes) hain cross section ST 0N 4 4 hain Type ST 0N S-TW.0.() 8.98 Width (Outer) Height (Outer) ST0 V-M S-TW.00.() Width(Outer) S-TW.05.() ree end bracket -Ø.5(M olt Holes) 8-Ø.5(M olt Holes) 8-Ø.5(M olt Holes) Ø.5(M olt Holes) 8-Ø.5(M olt Holes) Moving point rame Height (Inner) Height(Outer) 9. rame ST0 V-S Height(Inner) 8-Ø.5(M olt Holes) 8-Ø.5(M olt Holes) 8-Ø.5(M olt Holes) S-TW.00.() S-TW.0.() System tie wrap (STW) S-TW.0.() 8-Ø.5(M olt Holes) 8-Ø.5(M olt Holes) ixing point Weight kg/m ST0 V-M (imensions in mm) 4 M. olt hole width ST0 V-M 9. ront point M olt Holes 4.2 ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). ❶ sb-v0/s ❷ sb-v0/m ST0 1.2 V-M ST0 V-T.9 Hole Type (imensions in mm) ❸ sb-v0/m S-TW ividers(v) 9. ❺ sb-v0/w ➊ Ø.5(M olt Holes) 4-Ø.5(M olt Holes) 4-Ø.5(M olt Holes) Ø.5(M olt Holes) 4-Ø.5(M olt Holes) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. ➋ 9..9 ST0 V-S ST0 V-S 4 ➍ S-TW.00 Separators(SP) hain Type ST 0N S-TW.0 Tie wrap (TW) ST0 V-W 4 4 ❹ sb-v0/t 5 2 Ordering NO. S-SP/M. S-SP/M. S-SP/M. S-SP/M.5 S-SP/M. S-SP/M. S-SP/M.0 S-SP/M.15 S-SP/M ➎ ST0 V-S ST0 V-M ST0 V-T System Tiewrap ST0 V-T 20~mm S-TW.05.8 (imensions in mm) S-TW.00 mm rame S-TW.0 ➌ sb-v05/w sb-v00/w 0.8 sb-v0/w ront point 4-Ø.5(M OLT Holes) 4 Upper side point Ø.5(M olt Holes) Side point ttached to racket (M OLT Holes) 4 hain Type S-TW.0.() 59 ST 0N Ø.5(M OLT Holes) Ordering No. S-TW.0. S-TW.0. S-TW.0. S-TW.0.5 S-TW.0. S-TW.0. S-TW.0.0 S-TW.0.15 S-TW.0. S-TW.0.() S-TW.0.() rame Hole Type S-TW.0 M olt Holes (imensions in mm) 9. 9 (imensions in mm) sb-v0/w hain Type Ordering No. S-TW S-TW0/0N S-TW0/0N S-TW0/0N.5 0 ST 0N S-TW0/0N S-TW0/0N S-TW0/0N S-TW0/0N.15 S-TW sb-V0/W 0 S-TW0/0N P SYSTM O.,LT

15 ST 02N Hinge frame-pinlock type Shift hain alculation of the chain length [ L = Ls 2 + Lp ] Load diagrams selfsupporting length 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max 2.5m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Lf Ls/2 Ls Ls/2 Vertical with curve below 2 H: 2R+ Hs: Hs H+ - Horizontal application mounted on its side ending Radius (R) Lp Loop Length ,04 1,20 Lf Loof Projection H Moving Height (imensions in mm)

16 hain cross section ividers(v) les) Ø(M OLT Holes) hain Type ST 02N Moving point S-TW.05.() +42 hain Type Width(Outer) Height(Outer) ST 02N S-TW.00.() ront point Width (Outer) Height (Outer) Ø.2(M olt Holes) 2 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) Ø(M OLT Holes) Ø(M OLT Holes) Ø.2(M +42 olt Holes) 8-Ø.2(M olt Holes) rame rame S-TW.05.() ree end bracket S-TW.05.() Hole Type Height(Inner) M. olt hole width Height (Inner) Weight kg/m ❸ sb-v0/t (imensions in mm) ST 02 V-M ST 02 V-S 21.5 ST 02 V-T M olt Holes ssemble divider every second frame. V.T : pplied to rame ~. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). ❶ sb-v0/s ❹ sb-v0/w 2 41 ST 02 V-M ST 02 V-S ST 02 V-T ST 02 V-W 4-Ø.2(M olt Holes) 4-Ø.2(M olt Holes) S-TW.00.() Upper side point (imensions in mm) Side point S-TW.05 ➊ ➌ Tie S-TW.00 wrap (TW) ❷ sb-v0/m ➋ sb-v05/w sb-v00/w 0.8 S-TW ➍ System Tiewrap 21.5 (imensions in mm).8 8 sb-v05/w Ø.2(M OLT Holes) S-TW.0 S-TW.00 sb-v0/w sb-v00/w 4 S-TW.00.() S-TW.05 mm S-TW.00.8 S-TW System tie wrap (STW) Ø.2(M olt Holes) Ø.2(M olt Holes) 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) ixing point 8-Ø.2(M olt Holes) 8-Ø.2(M olt Holes) ront point Ø.2(M olt Holes) Ø.2(M olt Holes) 4-Ø.2(M olt Holes) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment. Separators(SP) hain Type ST 02N 20~mm Ordering NO. sb-sp/ Ø.5(M OLT Holes) hain Type S-TW.0.() ST 02N 4-Ø.5(M OLT Holes) Ø.5(M OLT Holes) Ordering No. S-TW.0. S-TW.0.() S-TW.0.5 S-TW.0. S-TW.0. S-TW.0.1 S-TW.0.0 S-TW.0.15 S-TW.0.15 S-TW S-TW.0. S-TW.0.2 S-TW.0.2 S-TW.0. S-TW.0.() rame Hole Type M olt Holes (imensions in mm) 9. S-TW hain Type Ordering No. ST 02N S- TW S-TW5 S-TW S-TW S-TW P SYSTM O.,LT (imensions in mm) sb-v0/w

17 ST 095N Hinge frame-pinlock type Shift hain alculation of the chain length Load diagrams selfsupporting length [ L = Ls 2 + Lp ] 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max.0m Vertical curve below = max m Side Mounted, Unsupported = max.0m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Lf Ls/2 Ls Ls/2 Vertical with curve below 95 H: 2R+ Hs: Hs H+ ending Radius (R) Lp Loop Length Lf Loof Projection H Moving Height Horizontal application mounted on its side ,0 1,1 1,0 1, (imensions in mm)

18 hain cross section ividers(v) Width(Outer) Height(Outer) ST 095N S-TW.05.() ST 095 V-S 2 rame Height(Inner) M. olt hole width ST 95 V-R S-TW.05.() ST 095ST V-T 095 V-T 24 4-Ø(M olt Holes)4-Ø(M olt Holes) Hole Type ST 095 V-T -2-2 ST 095 ST 095V-R V-R 4-Ø(M olt Holes)4-Ø(M olt Holes) -2.5 hain Type ST 095 V-M Ø(M OLT Holes) Ø(M ST olt Holes) ST 095 V-S 095 V-S ❹ sb-v00/w ST ST 0995 V-R V-M ST 095 V-S ront point 44 2 ST 095 V-M ST 095 V-M.8.5 ❹ sb-v00/t Ø(M olt Holes)8-Ø(M olt Holes) Ø(M olt Holes)8-Ø(M olt Holes) 14. ST 095 V-M ixing point 8-Ø(M olt Holes) 8-Ø(M olt Holes) 8-Ø(M olt Holes)8-Ø(M olt Holes) ❷ sb-v00/m ❸ sb-v00/r 8-Ø(M olt Holes) Moving point + System Tiewrap (imensions in mm) ree end bracket 8-Ø(M olt Holes) ➎ 4- Ø(M OLT Holes).8.8 ➋ ❶ sb-v00/s Weight kg/m + Height (Inner) ➍ ssemble divider every second frame. V.T : pplied to rame 2~0. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket() ST 095N rame Width (Outer) Height (Outer).8 hain Type ➌ ➊ 19. (imensions in mm) Separators(SP) ST 095 V-W 20~0mm M olt Holes mm (imensions in mm) System tie wrap (STW) hain Type Ordering NO. ST 095N sb-sp/0.0 4-Ø(M OLT Holes) It is a unit to classify each cable for Upper side point S-TW sb-v05/w 4.5 sb-v05/w S-TW ST 095N sb-v05/w sb-v00/w S-TW S- TW S-TW5 S-TW S-TW S-TW0 S-TW.05 M olt Holes S-TW.0 Ordering No. sb-v00/w hain Type 21 S-TW (imensions in mm) sb-v0/w (imensions in mm) S-TW.00.() Ø.2(M OLT Holes) Hole Type.8 ST 095N S-TW.00.() rame 1.8 S-TW.00.5 S-TW.00. S-TW.00. S-TW.00.0 S-TW S-TW S-TW.00. S-TW S-TW.00.2 S-TW.00.2 S-TW.00. S-TW.00. S-TW S-TW.00.() Ordering No..8 hain Type Ø(M OLT Holes).8 Side point Ø(M olt Holes) ront point It can either be installed to free end bracket or installed separately according its application environment. OLT Holes) Tie wrap (TW) preventing entanglement of cables. S-TW.05.() P SYSTM O.,LT. -1 S-TW sb-v00/w S-TW.0 sb-v0/w

19 ST 120N Hinge frame-pinlock type Shift hain alculation of the chain length [ L = Ls 2 + Lp ] Load diagrams selfsupporting length 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max.0m Vertical curve below = max 120m Side Mounted, Unsupported = max.0m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Lf Ls/2 Ls Ls/2 Vertical with curve below 120 H: 2R+ Hs: Hs H+0-1 Horizontal application mounted on its side ending Radius (R) Lp Loop Length 1,04 1,9 1, 1,42 1,580 1, 2,051 Lf Loof Projection H Moving Height , (imensions in mm)

20 hain cross section ividers(v) oles) (M OLT Holes) Ø(M olt Holes) 8-Ø(M olt Holes) hain Type ST 120N hain Type 12 Width(Outer) 9 ST 120N ront point Width (Outer) Height (Outer) Height(Outer) ree end bracket Ø(M olt 8-Ø(M Holes) olt Holes) Moving point 8-Ø(M olt Holes) rame rame System tie wrap (STW) 4- Ø(M OLT Holes) Ø(M OLT Holes) S-TW.05.() Ø(M olt Holes) Hole Type Height(Inner) 12 M. olt hole 9width 12 8 Height (Inner) Weight kg/m (imensions in mm) M olt Holes ➊ ➌ ➍ ➋ ➎ ssemble divider every second frame. V.T : pplied to rame ~00. V.M : Normal ivider. V.W : Tie wrap divider for free end bracket(). ❶ sb-v05/s ❷ sb-v05/m.8 8 ❹ sb-v05/w M olt Holes P SYSTM O.,LT ST120 V-M ST120 V-S ST120 V-R 14 ST120 V-T ST120 V-M ST120 V-S ST120 V-R ST120 V-T ixing point 8-Ø(M olt Holes) 8 Upper side point Ø(M olt Holes) 8-Ø(M olt Holes) ront point (imensions in mm) Side point Ø(M olt Holes) It is a unit to classify each cable for preventing entanglement of cables. It can either be installed to free end bracket or installed separately according its application environment Ø(M olt Holes) Ø(M olt Holes) 4-Ø(M olt Holes) Tie wrap (TW) hain Type ST 120N ❸ sb-v05/r Ordering No. S-TW.05.5 S-TW.05. S-TW.05.1 S-TW.05. S-TW.05.0 S-TW S-TW.05. S-TW.05.2 S-TW.05.2 S-TW S-TW.05. S-TW.05. S-TW.05.0 S-TW.05.4 S-TW.05.0 S-TW.05.5 S-TW rame 2 System Tiewrap (imensions in mm) hain Type Ordering No. ST 120N Ø(M olt Holes) 4-Ø(M olt Holes) Separators(SP) hain Type ST 120N S- TW S-TW5 S-TW S-TW S-TW0 ❹ sb-v05/t ~00mm Ordering NO. sb-sp/ mm Hole Type

21 ST 0N Hinge frame-pinlock type Shift hain alculation of the chain length Load diagrams selfsupporting length [ L = Ls 2 + Lp ] 1m 2m 2.5m m 4m 5m m Vertical with curve above Other installation length Vertical curve above = max.0m Vertical curve below = max 0m Side Mounted, Unsupported = max 4.0m Kg/m Stroke 2m 4m 5m m 8m m 12m Layout of the chain Ls: Stroke Hs: Safe Space Vertical with curve below 0 H: 2R+1 Hs: Hs H+80 1 ending Radius (R) Lp Loop Length Lf Loof Projection H Moving Height Horizontal application mounted on its side ,2 1,5 1,80 2, 2, ,0 1, (imensions in mm)

22 hain cross section ividers(v) +4 hain Type ST 0N Width (Outer) Height (Outer) ree end bracket -29 Moving point Ø(M olt 4-Ø(M Holes) olt Holes) Ø(M olt 4-Ø(M Holes) olt Holes) rame Height (Inner) 1 Weight kg/m ssemble divider every second frame. V.M : Normal ivider. V.T : pplied to rame ~00. ❶ sb-v/s ➊ ➋ ➌ ❷ sb-v/m (imensions in mm) ST ST 0 0 V-M V-M ST ST 0 0 V-S V-S ST 0 V-M ST ST 0 0 V-T V-T Ø(M olt 4-Ø(M Holes) olt Holes) ixing point Ø(M olt 4-Ø(M Holes) olt Holes) ❸ sb-v/t (imensions in mm) ST 0 V-M ST 0 V-S ST 0 V-T Separators(SP) hain Type ST 0N Height(Outer) 1 rame Height(Inner) 1 Hole Type M olt Holes (imensions in mm) hain Type ST 0N Tie wrap (TW) 20~00mm mm Ordering NO. sb-sp/ hain Type Ordering No. ST 0N S- TW S-TW5 S-TW S-TW S-TW (imensions in mm) P SYSTM O.,LT. -20