SERIES. A registered trademark of SNA Europe Group RATCHETING
|
|
- Daniella Warner
- 5 years ago
- Views:
Transcription
1 SERIES A registered trademark of SNA Europe Group RATCHETING R E V O U T I O N
2 RATCHETING R E V O U T I O N Ring end angle 15º for knuckle clearance or better grip 12-point Dynamic-Drive TM Profile ensures longer life for screws and nuts Compact, reversible gear allows you to change direction without removing the wrench Optimise productivity, even in difficultly accessible areas Only 5º needed to work compared to 30º needed with a conventional wrench Requires 80% less space to operate Gear integrated in the body of the wrench improves accessibility experience the Revolution Bahco Quality Guaranteed
3 1RM / 1RZ ratcheting combination wrenches with ring stop Ratchet combination gear wrench in metric and inches sizes Standards: ISO and DIN 3113 Material: High performance alloy steel Open end angle 15º with a slier head to get more accessibility Ratchet in the ring for high productivity application 12 points Dynamic-Drive TM Profile provides longer life for screws and nuts 5º action angle Switch for quick change of right and left direction Bigger and bi-directional size marking for easy identification Chrome plated Micro Matt finishing provides high quality surface DYNAMIC-DRIVE TM 1RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RZ-1/ / x x RZ-5/ / x x RZ-3/ / x x RZ-7/ / x x RZ-1/ / x x RZ-9/ / x x RZ-5/ / x x RZ-11/ / x x RZ-3/ / x x RM/SH12 1RM/SH6 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 8, 10, 12, 13, 14, 17
4 NEW RATCHETING WRENCHES EXPERIENCE THE EVOUTION! Bahco presents the New Range of Ratcheting Wrenches. Remaining the unquestionable leader of wrenches development. Bahco dominates a new technology which will allow to increase the accessibility and work even faster with the new quick and easy direction change gear. QUICK AND EASY DIRECTION CHANGE The new lever is versatile, smooth and as a result quick and easy to work with Protected against potential unintended hits NO MORE RESTRICTIONS! THE BODY AND HEAD OF THE WRENCH ARE UTRA COMPACT The new 1RM series gives you all potential thanks to the new gear that is fully integrated in the body of the wrench. It gives you more accessibility to restricted working areas. Nm 500 WI NOT ET YOU DOWN! Bahco ratcheting wrenches pass the torque requirements defined in ISO standards for standard combination wrenches. The wrenches pass a cycle test where we apply a torque equivalent to 125% of the ISO standard for times DIN/ISO BAHCO RM/S5 THE 5 MOST COMMONY USED SIZES OF THE MARKET IN ONE SET! The new lever is versatile, smoother and as a result quicker and easier to work with Protected against potential unintended hits 8, 10, 13, 17, 19
5 emaining the unquestionable leader of wrenches E THE EVOUTION! This ring stop system though is a spring, it is ty and work even faster with the new retractable and by gently pressing down the ring end downwards, you can easily overcome the spring force and continue your way down along the screw NO MORE or spindle RESTRICTIONS! and reach the desired nut. THE BODY AND HEAD OF THE WRENCH ARE UTRA COMPACT The new 1RM series gives you all potential thanks to the new gear that is fully integrated in the body E RESTRICTIONS! of the wrench. It gives you more accessibility to DY AND restricted HEAD OF working THE areas. H ARE UTRA COMPACT 1RM series gives you all potential thanks gear that is fully integrated in the body ench. Nm It gives you more accessibility to working areas /ISO 150 HCO DIN/ISO BAHCO ACCESSIBIITY This ring stop system though is a spring, it is ease the accessibility and work even faster with the new retractable and by gently pressing down the ring end downwards, you can easily overcome the spring force and continue your way down along estionable ACCESSIBIITY leader of wrenches ACCESSIBIITY the SPEED: screw or PROBABY spindle and reach THE the GREATEST desired nut. EFFICIENCY The spring in the ring will make the wrench stop on top of the screw head or nut, this way, there is no need to hold the wrench with the other hand in order to avoid slipping down the screw head; the wrench will stay at the top of the screw head and you will be able to use the other hand to work safer. RING - STOP SYSTEM EFFICIENCY RING - STOP SYSTEM FEATURE OF A IS THE NUMBER OF This ring stop system though is a spring, it is TEETH OF OUR GEARS retractable and by gently pressing down the ring end downwards, you can The easily gears have overcome between the 50 and 136 teeth, they can work spring force and continue within your an angle way down between along 7.2º and 2.6º. the screw or spindle and This reach means the that desired when you nut. fasten a hex head screw: The spring in the ring will make the wrench stop on top of the screw head or nut, this way, there is no need to hold the wrench with the other hand in order to avoid slipping down the screw head; EFFICIENCY ASO the wrench TO will WORK stay at UPSIDE the top of the DOWN!! screw head The spring in the ring and will make you will the be wrench able to stop use the other hand to on top of the screw head work or safer. nut, this way, there is no need to hold the wrench with the other hand in order to avoid slipping down the screw head; the wrench will stay at the top of the screw head and you will be able to use the other hand to work safer. SPEED: PRO FEATURE OF TEETH OF O The gears have b within an angle be This means that w With a regular combination wrench, you need 30º to With a regular c reach the next corner of the screw head With Bahco ratcheting wrench in less than 6º and without taking out the ring end from the screw head you will considerably work faster! reach the next With Bahco ratc without taking o you will conside ASO TO WO S S4RM/3T - MOST COMMONY USED SIZES E MARKET IN ONE SET! lever is versatile, smoother and as a result MONY USED SIZES IN ONE SET! and easier to work with d against potential unintended hits 17, 19, smoother and as a result k with al unintended hits S4RM/3T S4RM/3T - S4RM/4T - S4RM/3T S4RM/5T- S4RM/4 S4RM/3T S4RM/3T 8x9x10x11, 12x13x14x15, 16x17x18x19 S4RM/4T S4RM/4T S4RM/4T S4RM/5T 8x9x 8x9x 8x9x10x11, 12x13x14x15, 1 8x9x 8x9x10x11, 12x13x14x15, 16x17x18x19, 21x22x24x27 8x9x10x11, 12x13x14x15, 1 S4RM/5T S4RM/5T 8x9x10x11, 12x13x14x15, 16x17x18x19, 21x22x24x27, 30x32x34x36 8x9x10x11, 12x13x14x15, 1
6 41RM OCKING FEX HEAD RATCHETING COMBINATION WRENCHES Ratchet combination wrenches with swivel head in metric sizes Standards: ISO 3318 and DIN 3113 Material: High performance alloy steel Open end angle 15 with a slier head to get more accessibility Ratchet swivel head in 180 with fixed steps in every 15 5 ratchet action angle 12 points Dynamic-Drive TM Profile provides longer life for screws and nuts Chrome plated micro matt finishing provides high quality surface 41RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM X X RM STUBBY RATCHETING COMBINATION WRENCH WITH RING STOP Switch for quick change of right and left direction 10RM x x RM x x RM x x RM X X RM x x RM x x RM / 1320RZ DOUBE FAT RING RATCHETING WRENCH 1320RM x x RM x x RM x x RM x x RM x x RM x x RM x x RM X X RZ-1/4-5/ /4-5/ x x RZ-3/8-7/ /8-7/ x x RZ-1/2-9/ /2-9/ x x RM/SH8 1320RM/SH8 10RM/S5 8, 10, 11, 12, 13, 14, 17, 19 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 8, 10, 13, 17, 19
7 RATCHETING R E V O U T I O N Bahco has a number of adaptors in the range which allow to cover different functions and sizes to several 1RM wrench sizes FAT ADAPTORS MORE FEXIBIITY WITH ESS SPACE REQUIRED IN YOUR TOOBOX AND ESS WEIGHT These adaptors are only useful in 14 &19 ratcheting combination wrenches They turn those sizes into other metric, imperial and Torx sizes Smaller sizes are adapted to the 14 and bigger ones to the 19 opening 2 Wrenches + Adaptors: Cover all your working needs Without carrying all wrenches IND-1004-ENG Bring DIVERSITY to the 14 & 19 ratcheting wrenches and turn them MUTIPURPOSE SOCKET & BIT ADAPTORS There are different adaptors for different wrench sizes (10, 13 and 19 ) These adaptors turn the ratcheting ring end of the wrench into a regular ratchet or a bit ratchet Able to use your 1/4, 3/8 or 1/2 sockets and accessories with the ratcheting wrenches; also 1/4, 5/16 and 10 bits GO-THROUGH SOCKETS: The ring stop will also allow you to turn your 19 ratcheting combination wrench into a go-trough ratchet useful with the go-through sockets in the Bahco range 1320SRM/S29 1RMA/S8 1RMA/S4 Ratcheting box wrench 1320SRM with 5 ratchet action and reverse lever Adaptor for 1/4 and 1/2 sockets with quick release press button Adaptors for hex screws to cover 8-19 and 5/16-3/4 inch sizes Adaptors for TORX screws to cover sizes from E8 to E22 Adaptor for 1/4, 3/8 and 1/2 sockets with quick release press button Adaptors for 1/4 and 5/16 bits with retaining ring Adaptors for 1/4, 3/8 and 1/2 sockets with quick release press button Adaptor for 1/4 bits with retaining ring
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationHI-PRESS HYDRAULICS Ltd
-, Low Profile renches hown: units with interchangeable cassettes Rigid teel Design The Professional Low Profile olution implicity Includes handle to improve tool handling and safety. No tools are needed
More informationTT TORQUE WRENCHES. TTi TORQUE WRENCHES. For no-nonsense torqueing - comfortable, accurate and easy to use
TT TORQUE WRENCHES TTi TORQUE WRENCHES 2 RATCHET ADJUSTABLE - DUAL SCALE 13285 TTi20, ¼", 1-20 N m, 10-180 lbf in 13640 TTi20, 3 8", 1-20 N m, 10-180 lbf in 13658 TTi50, 3 8", 8-50 N m, 6-35 lbf ft 13659
More informationPRODUCTIVITY THROUGH SPEED, STRENGTH & ACCESS HIGHLIGHTS PRODUCT BROCHURE
GET IT DONE. PRODUCTIVITY THROUGH SPEED, STRENGTH & ACCESS HIGHLIGHTS PRODUCT BROCHURE GEARWRENCH BOOSTS MECHANICS PRODUCTIVITY GearWrench sets the new standard for productivity in the work place with
More informationAir screwdrivers CSEZ
Air screwdrivers CSEZ Faster, shorter, more accurate Air screwdrivers CSEZ Ideal for some tightening operations on enamelled or painted components, a greater tightening speed was requested (about 2000
More informationOWNER'S MANUAL. Copyright 1999 ATS - All Rights Reserved
OWNER'S MANUAL AL Issue 2 - August 19, 1999 Copyright 1999 ATS - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationB-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
More informationImpact Wrenches. Impact & Ratchet. Wrenches. CP7759Q p.13. See the unique
Impact & Ratchet Wrenches See the unique CP7759Q p.13 P remium Tool 7 Impact & Ratchet Wrenches blows to a fastener, producing torque. The advantage of impact wrenches is the high power-to-weight ratio,
More informationAir screwdrivers & nutrunners. Accessories. Bits and sockets. Compressed air system accessories. Balancers and balancing arms INDUSTRIAL AIR TOOLS
Air screwdrivers & nutrunners Accessories Bits and sockets Compressed air system accessories Balancers and balancing arms INDUSTRIA AIR TOOS Bits and sockets Fiam accessories......are designed and built
More information80 SERIES MOBILE-KARRIERS. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE 80 SERIES
OPERATOR S MANUAL FOR MORSE Model 80A and 80A-M for 55 gallon standard steel drums (22½ diameter) Model 80C for steel or fiber drums (21-23 diameter) Model 80i for 55 gallon steel drum (22-½ diameter).
More informationINSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)
INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationPIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure
PIVOT SHUTTLE Chain Ring Replacement Maintenance Procedure This maintenance guide provides detailed instructions to replace the chain ring of the Shimano Steps E8000 E-bike system should something malfuction
More informationOwner s Manual Addendum (36310, 36311)
FN15 DMR Owner s Manual Addendum (36310, 36311) We are pleased that you have chosen an FNH USA FN 15 Designated Marksman Rifle (DMR). The FN 15 DMR shares the same reliability, durability, quality and
More informationThe All New DIAMOND & DIAMOND BT
The All New DIAMOND & DIAMOND BT. Specs The Diamond The Diamond BT Type Badminton Badminton & Tennis Pulling Method Constant Pull Constant Pull Tension Range 10 38 lbs 10 88 lbs Tension Increments 0.1
More informationRatchet Wrenches CP7823 CP826. Ratchet 1/4" & 3/8" Lightweight & handy CP824T CP825T. Swivel head CP826T CP7824 FEATURES FEATURES BENEFITS BENEFITS
Ratchet 1/4" & 3/8" CP824 CP825 Lightweight & handy Small & handy CP824T CP824 with 3/8" - 1/4" Standard duty ratchet - Easy speed control - Extended length - Designed for greater reach in confined areas
More informationOWNER'S MANUAL. Copyright 2003 GAMMA - All Rights Reserved
OWNER'S MANUAL AL Issue 1 - December 2003 Copyright 2003 GAMMA - All Rights Reserved OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2... ASSEMBLY INSTRUCTIONS PAGE 4... MOUNTING THE RACQUET PAGE
More informationINSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups)
INSTRUCTION GUIDE S-WORKS ROAD CARBON CRANKSET (Carbon and Alloy OSBB cups) THIS BRIEF INSTRUCTION GUIDE CONTAINS IMPORTANT INFORMATION. PLEASE READ CAREFULLY AND STORE IN A SAFE PLACE. Congratulations!
More informationT Torque tester and equipment T Torque multipliers T Torque angle indicators T Special DREMO tools
A strong brand of the GEDORE Group T Torque tester and equipment T Torque multipliers T Torque angle indicators T Special DREMO tools T DREMOMETER range T Torque screwdrivers T Torque wrenches T Electronic
More information012018 4 SOCKET SETS MASTER 5 SOCKET SETS 6 SOCKETS INDIVIDUAL & ACCESSORIES 8 RIVET TOOLS 8 AVIATION SNIPS 8 ADJUSTABLE WRENCHES 10 PIPE WRENCHES 10 PLIERS 13 SCREWDRIVERS 15 HEX KEYS 16 STAPLERS &
More information1/2 REVERSIBLE RATCHET. 1/2 REVERSIBLE RATCHET MODEL NO: CAT 22b + CAT 91 PART No: & OPERATION & MAINTENANCE INSTRUCTIONS
1/2 REVERSIBLE RATCHET 1/2 REVERSIBLE RATCHET MODEL NO: CAT 22b + CAT 91 PART No: 3110411 & 3110847 OPERATION & MAINTENANCE INSTRUCTIONS 0104 Fig.1 HAND-ARM VIBRATION Refer to notes on page 7 MODEL No:
More informationSB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j
SB 52 Spare parts list Hydraulic breakers SB 52 s/n BES043707 2018 Construction Tools PC AB No. 9800069301j 2018-01 General information This spare parts list applies to the following: Part number 8460030010
More information1500 Follow Spot Yoke
1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationSI-F971A. 9-speed super narrow chain such as CN-7700 / CN-HG92 8- / 7- / 6-speed narrow chain such as CN-HG50 / CN-IG51
SERVICE INSTRUCTIONS SI-F971A Front Drive System Before use, read these instructions carefully, and follow them for correct use. WARNING Use neutral detergent to clean the chain. Do not use alkali-based
More informationHP10168 & HP10169 KITS HP10152 / HP10154 / HP10156
HP10168/&HP10154 HP10169/KITS HP10152 HP10156 HP10152: 2" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10154: 4" AMP Air Suspension Spacer Kit Ford F-450 Pickup 2WD & 4WD HP10156: 6" AMP
More informationPTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
More informationFTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
More informationTRAILMATE METEOR ASSEMBLY MANUAL
TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster
More informationPTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3
The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1.1.1 Key to the circuit diagram Circuit diagram The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Types A & B
Side-of-Pole Mount for 1 Module (SPM1) For Module Types A & B ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080311-2 SP3363-1 Side-of-Pole Mount for 1 Module (SPM1)
More informationSpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].
SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationSafety Alubar System 2016 / 17
Safety Alubar System 2016 / 17 Fritschi AG Swiss Bindings Hauptstrasse 9 CH-3713 Reichenbach Phone +41 33 672 14 15 Fax +41 33 672 14 10 info@fritschi.ch www.fritschi.ch Diamir Fritschi Swiss Swiss Innovation
More information602 STRINGING MACHINE OWNER'S MANUAL
PROGRESSION 602 STRINGING MACHINE OWNER'S MANUAL AL Issue 1- April 2000 Copyright 2000 GAMMA Sports - All Rights Reserved PROGRESSION 602 STRINGING MACHINE TABLE OF CONTENTS PAGE 1... WARRANTY PAGE 2...
More informationPiloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
More informationLIST NO. E948 SLIDE COMPOUND SAW. Model C 8FSE (E1)
Model C FSE SLIDE COMPOUND SAW LIST E94 (E1) 42 A A 1 2 3 4 10 5 6 9 11 14 15 12 16 1 1 19 20 21 23 26 25 24 29 30 2 2 33 31 32 53 4 4 49 46 34 36 3 39 40 35 3 45 42 50 54 56 5 5 52 13 22 41 51 612 613
More informationAgilent 1290 Infinity Pump Head Maintenance
Agilent 1290 Infinity Pump Head Maintenance Technical Note Agilent Technologies Notices Agilent Technologies, Inc. 2012-2015, 2016 No part of this manual may be reproduced in any form or by any means (including
More informationHOLLISTER-WHITNEY ROPE GRIPPER
HOLLISTER-WHITNEY ROPE GRIPPER Instructions for Model #620GA1, 620GA2 (US PATENT 8,511,437) WARNING: KEEP HANDS CLEAR OF ROPE GRIPPER. FORCES CREATED CAN CRUSH FINGERS. Figure 1 ROPE GRIPPER TM MOUNTING
More informationPosition control Constant torque. Maximum 0.5 (.02) Axial. Radial. Hinge centerline 9±0.1 (.354±.004) Part Number
332 ST-7A Hinge 400 N (90 lbf) Axial load: 300 N (67 lbf) 1. Install hinge using No. 4 socket head cap screw. must include (1) type A and (1) Radial Maximum 0.5 (.02) 2 x Ø 3.05 (.12) Counterbore both
More information600 / 600FC OWNER'S MANUAL
PROGRESSION 600 / 600FC OWNER'S MANUAL Issue 2 / Version E - Dec. 10, 1997 Copyright 1997 GAMMA Sports - All Rights Reserved PROGRESSION 600 / 600FC OWNER'S MANUAL TABLE OF CONTENTS PAGE 1... WARRANTY
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E933 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model 2004 2 13 (E2) 1 2 3 4 5 6 7 40 41 601 8 9 10 11 12 26 27 28 29 30 29 602 618 602 10 9 42 603 604 605 606 607 608 14 43 13
More informationProven Design, Performance & Reliability
FLYING SAIL FURLERS Proven Design, Performance & Reliability Ronstan s Flying Sail Furlers have been developed over recent years for use by some of the world s top racing syndicates. Encouraged by their
More informationMate ULTRA IMT Multi Tool Assembly Tooling Installation Instructions
Installation and assembly instructions for Mate ULTRA IMT Multi Tool Punch and Die Holder assemblies. 8-Station is shown. 3-Station uses the same procedure. Lubrication Port Keep top lubricated (for machine
More informationFisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves
Instruction Manual Lever-Lock Handlever Actuator Fisher Lever Lock Handlever Actuators for POSI SEAL A81 Rotary Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications...
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationU.S. Patent No. 7,922,246. Patents Pending
U.S. Patent No. 7,922,246 Patents Pending 2 Table of Contents Page General Information... 3 Warnings and Cautions... 4 Tools... 6 SmartDock Parts... 6 Initial Set-Up and Adjustment... 7 Select Valve Retaining
More informationHaving the right scuba tools for the job saves time and allows the professional technician to concentrate on doing the job right.
2018 CATALOG INTRODUCTION At Scuba Service Tools we are dedicated to produce tools that meet the high standards of todays dive industry. Our range includes high quality standard scuba tools as well as
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationMedcaster Bed Casters
Medcaster Bed Casters Primacy Twin (PT) Med-Ultra (MU) Twin Tech Ultra (TU) Dual wheel smooth integrated central locking (page 10). Hooded twin wheel easy turning in tight spots (page 10). Unhooded twin
More informationSB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No
SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES043707 2018 Construction Tools PC AB No. 9800041001 2018-01 General information This spare parts list applies to the following: Part number 8460030040
More informationInstalling a Christie One Mount/Christie One Mount Plus
Installing a Christie One Mount/Christie One Mount Plus This document provides instructions for installing the Christie One Mount or Christie One Mount Plus and optional accessories to mount Christie projectors
More informationSafety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
More informationMAKES A DIFFERENCE SANDVIK PARTS EVOLUTION
INNOVATION THAT MAKES A DIFFERENCE SANDVIK PARTS EVOLUTION WWW.CONSTRUCTION.SANDVIK.COM B10-6008ENG Sandvik Construction. SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationMODEL TRIPEX PULLEY SYSTEM
MODEL 922184 TRIPEX PULLEY SYSTEM 1 PARTS LIST FOR TRIPEX PULLEY SYSTEM Note: Check with your architect or a professional contractor for hardware required to attach the unit to the wall and floor in your
More informationRMS. Quick Change System. for manual chucking tool change. Advantages: Convenient chucking tool changes without the slightest sacrifice to safety.
for manual chucking tool change dvantages: Convenient chucking tool changes without the slightest sacrifice to safety. One and the same tool carrier can be used for virtually any Typee of mandrel, face
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators. It complies with the relevant safety standards
More informationFisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves
Instruction Manual D103319X012 Lever-Lock Handlever Actuator Fisher Lever-Lock Handlever Actuators for POSI-SEAL A81 Rotary Valves Contents Introduction................................. 1 Scope of Manual.........................
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More informationCatalog No. C09118A. Nitrogen Gas Spring Linked System Components
Catalog No. C09118A Nitrogen Gas Spring Linked System Components Everything You Need to Construct a Linked System Linked Systems Introduction Numerous Piping Options Many customers recognize the benefits
More informationDREMOMETER PERMANENT PRECISION
TORQUE TOOLS DREMOMETER PERMANENT PRECISION Torque wrench made of high-strength aluminium alloy Drive in accordance with application DREMOMETERS are available for a large variety of applications in controlled
More informationAir tappers. Air drills and tappers. Tapping capacity: from Ø 6 to 18 mm. For stud bolts and inserts. Type of grip: straight and pistol models
Air drills and tappers Air tappers Tapping capacity: from Ø to 1 mm (on mild steel) For stud bolts and inserts Type of grip: straight and pistol models INDUSTRIAL AIR TOOLS Choosing the right air tapper
More informationAir Grinders - Angle
Screwdriving technology Automation Air motors Air tools Air Grinders - Angle without gearing /// with gearing with vane/turbine motor For grinding wheels Ø 100, 115, 125, 150, 180, 230 mm Power output:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08L07-E09-100 Application 2013 ODYSSEY Publications No. AII 13265 Issue Date AUG 2012 Put this information in the glove box with the vehicle owner s manual. PARTS
More informationPTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationOFF-ROAD ROBUST LESS MAINTENANCE EASY TO MOUNT EXCELLENT MODULATION
OFF-ROAD ROBUST LESS MAINTENANCE EASY TO MOUNT EXCELLENT MODULATION 18 OFF-ROAD 19 MAGURA BLOOD Breakaway lever Carbon tubing REACH ADJUST Mirror mount EASY MOUNT FROM CNI TO BLACK RHR Rotatable Hose Routing
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationFIX ROAD & FIX STRAP cargo securing systems Operating Instruction Manual
FIX ROAD & FIX STRAP cargo securing systems Operating Instruction Manual NWE NETWORK ENGINEERING OY AB VAT: FI 09628099 1 Introduction Please ensure you read these instructions and understand them fully
More informationOPERATING INSTRUCTIONS
0/05 OPERATING INSTRUCTIONS for gas pressure regulators PN0 with integrated slam shut valve (SSV) and integrated limited capacity safety relief valve (RV) MR 25 F0, MR 25 SF0 p e 20 kpa - 0 MPa (0,2-0
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E705 ELECTRIC TOOL PARTS LIST IMPACT WRENCH Model 2004 12 30 (E1) 1 3 501 506 2 502 503 504 505 4 5 6 7 8 15 16 17 18 13 14 9 10 11 12 19 20 6 21 22 23 24 25 26 34 27 35 36 38
More informationSAVE THESE INSTRUCTIONS. NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Walking Tutor, Installation and Operating Instructions Model No. WT 200 SAVE THESE INSTRUCTIONS NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further
More informationCopyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form without the written
MODEL G5791/G5792 17-PIECE 1 2" IMPACT WRENCH & RATCHET KIT INSTRUCTION MANUAL Copyright MAY, 2008 By Grizzly Industrial, Inc. Warning: No portion of this manual may be reproduced in any shape or form
More informationPRODUCT CATALOG 2017
PRODUCT CATALOG 2017 MATERIAL Polyurethane () holds are lighter, stronger and more impact resistant than traditional polyester () holds. holds offer a more rock like feel and ultimate wear recistance.
More informationAdjustable Broaching Head 3. Fixed Braoching Heads 4. Broaching Bits Hexagonal 5. Broaching Bits Square 6. Broaching Bits Torx 7
Rotary Broaching Heads & Accessories The Broaching Toolholder is a device that enables the processing of regular shapes (hexagons, squares etc.) in through and blind holes. The Broaching Tool is inclined
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationHOLLISTER-WHITNEY ROPE GRIPPER
HOLLISTER-WHITNEY ROPE GRIPPER Instructions for Model #620GA1, 620GA2 (Patented worldwide, other patents pending) WARNING: KEEP HANDS CLEAR OF ROPE GRIPPER. FORCES CREATED CAN CRUSH FINGERS. Figure 1 ROPE
More informationColumbia Taping Tools. Hydra Reach Handle. Manual
Columbia Taping Tools Hydra Reach Handle Manual Table of contents Warning 2 Introduction 3 Before you start, identify your handle 4 What is your problem? 5 Reservoir Upgrade 5 Setting up the loading system
More informationPush-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
More informationSide-of-Pole Mount for 1 Module (SPM1) For Module Type C
Module Type Width Length C 22-27 56-63 Side-of-Pole Mount for 1 Module (SPM1) For Module Type C ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022212-1 Side-of-Pole Mount
More informationMODEL / SINGLE and DUPLEX PULLEY SYSTEMS
MODEL 922181/922182 SINGLE and DUPLEX PULLEY SYSTEMS MODEL 922181 SINGLE PULLEY SYSTEM MODEL 922182 DUPLEX PULLEY SYSTEM 1 PARTS LIST FOR SINGLE/DUPLEX COLUMN PULLEYS Note: Check with your architect or
More informationK16.10 EDGE DOOR HANDLES K16 DOORS
K16 DOORS K16.10 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics... K16.10.03 1.1.
More informationYou have decided to buy an LP 10 E by STEYR SPORTWAFFEN the new dimension of match air pistols!
Congratulations! You have decided to buy an LP 10 E by STEYR SPORTWAFFEN the new dimension of match air pistols! The world-beating air pistol with electronic trigger! The STEYR LP 10 probably is the most
More informationNew Product Update - September 2017
New Product Update September 2017 Series 1 Ball Bearing Utility Blocks Available Now With a sheave diameter of 1mm these are the smallest and lightest ball bearing blocks available! The single block delivers
More informationUniversal Charging and Testing Unit FPU-1
1. DESCRIPTION 1.1. FUNCTION The charging and testing unit FPU-1 is used to charge accumulators with nitrogen or to check or to change the existing pre-charge pressure in accumulators. For this purpose
More information1/4 Air Ratchet Wrench
/4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All
More informationMUELLER. Mega-Lite Drilling Machine. Reliable Connections. table of contents PAGE. Equipment 2. Operating Instructions 3-4. Parts Information 5
operating Instructions manual MUELLER Mega-Lite Drilling Machine table of contents PAGE Equipment 2 Operating Instructions 3-4 Parts Information 5 Travel Charts 6-11! WARNING: 1. Read and follow instructions
More informationSERVICE KITS SPECIFICATIONS GENERAL DESCRIPTION. y Use only genuine ARO replacement parts to assure compatible. RM051S-XXX-XX Single Post Lift / Ram
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: S-635 General Information (pn 97999-635). RM051S-XXX-XX RM051S-XXX-XX SINGLE POST LIFT / RAM For use with 5 gallon
More informationF l o w c o n T R o l v a l v E S
Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,
More informationASG-SD2500 ASG-SD2500
ASG-SD2500 ASG-SD2500 Series Screwdrivers User s Guide Version 1.0.1 October, 2010 Page 1 ASG Precision Fastening ASG-SD2500 Series Screwdrivers User s Guide Version 1.0.1 Major Revision: October, 2010
More informationRekluse Motor Sports. TCS Clutch Baskets CRF 450R/X CR 250R
Rekluse Motor Sports TCS Clutch Baskets CRF 450R/X 2002 2008 CR 250R 1992 2006 Installation Guide Copyright 2006 Rekluse Motor Sports TCS Revision 1.000 RMS 4113 195-4113 Manual Revision: 081606 Rekluse
More informationMedium Heavy Vehicle Safety and Foundation 1
Medium Heavy Vehicle Safety and Foundation Student/intern information: Name Class Vehicle used for this activity: Year Make Model Odometer VIN Learning Objective / Task General Safety Identify tools and
More informationTORQUE WRENCHES CONTENTS MANUAL TORQUE MULTIPLIERS POWERED TORQUE MULTIPLIERS TORQUE MEASUREMENT INSTRUMENTS HYDRAULIC TOOL CALIBRATION FIXTURES
PRODUCT LIST 017 LEGEND CONTENTS TORQUE WRENCHES CONTENTS Accuracy (%) Ratchet Digital Display Single Scale Torque Handle IP Rated Dual Scale Fixed Case Included Multi Scale Calibration Certificate Adjustment
More informationH4802, H4802-1, H , and Pole Tampers
SERVICE MANUAL H4802, H4802-1, H-4802-6, and 43227 Pole Tampers Serial Codes FKA, FKF, FKM, FZP, FZR, FZT, and FZV Read and understand all of the instructions and safety information in this manual before
More informationDICTATOR "DIREKT" Gate Closer
DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder
More information