Having the right scuba tools for the job saves time and allows the professional technician to concentrate on doing the job right.

Transcription

1 2018 CATALOG

2 INTRODUCTION At Scuba Service Tools we are dedicated to produce tools that meet the high standards of todays dive industry. Our range includes high quality standard scuba tools as well as specialized custom made tools. All of our custom made scuba tools are manufactured from durable materials and tested in house, therefore we are able sell them at affordable prices. With our products you can save a dive during your holiday or fill a whole scuba workshop in your dive center. Scuba Service Tools has a wide customer base ranging from dive centers to individual technicians worldwide. Having the right scuba tools for the job saves time and allows the professional technician to concentrate on doing the job right. We hope you will find the right tool for the job in this catalog. In case you are looking for a custom made tool or just want some help on how to tool send us an using our contact form on CONTENT 1. Specialized tools per brand 2. Tool kits 3. O-rings 4. General workshop tools 5. Instrumentation

3 APEKS APEKS DRY SUIT VALVE BACKPLATE TOOL To be used to remove the back plate from the Apeks dry suit inflator. The tool can be used together with a 34mm wrench in case more torque is needed. Material: Acetal/stainless steel Price 23 SPECIALIZED TOOLS SKU: 1200-SST-021 AQUALUNG AQUALUNG 2ND STAGE DIAPHRAGM RETAINER TOOL Properly installing and removing the threaded diaphragm retainer ring becomes a piece of cake for the technician when using this tool. It fits the diaphragm retainer ring of several Aqualung 2nd stages including the Titan LX (2009 later models), Core and Legend. Material: Acetal Price 13 SKU: 1000-SST-001 AQUALUNG T-HANDLE SOCKET To open and close the diaphragm retainer / environmental cap of several Aqualung first stages this tool can be used. It does the job without scratching the surface of the first stage. Material: Acetal / stainless steel Price 18 SKU: 1200-SST-008

4 AQUALUNG AQUALUNG 2ND STAGE SETTING TOOL The slotted ends can be used by the technician to install and position the orifice. When setting the lever hight the middle section can be used. Material: Acetal Price 8 SKU: 1000-SST-049 AQUALUNG TITAN DRY CHAMBER CAP TOOL This tool opens en closes the dry chamber ring on top of the aqualung Titan models Material: Aluminium / Stainless steel Price 14 SKU: 3000-SST-006 AQUALUNG / 2ND STAGE POPPET HOLDER (4 SLOTS) Holding the poppet in position can be done with this tool while the technician is screwing down the nylon nut. This tool fits poppets which have 4 tabs. Material: Aluminium Price 9 SKU: 3000-SST-011

5 AQUALUNG AQUALUNG / OCEANIC 2ND STAGE POPPET HOLDER (3 SLOTS) This tool will remove and instal the HP seat from the housing of the Titan LX supreme first stage body. Material: Acetal / Stainless steel Price 14 SKU: 1200-SST-060 AQUALUNG 3 IN 1 POWER LINE INFLATOR TOOL Removal and installation of the special size (bigger than normal) schrader valve. Removal and installation of the inflator hose connector. Opening of the inflate button. Material: Acetal / Stainless steel / Brass Price 24 SKU: 1240-SST-009 SPECIALIZED TOOLS CRESSI CRESSI ENVIRONMENTAL SEAL CAP TOOL This tool can be used to assemble and disassemble the environmental cap on several Cressi first stages (MC7, MC9). Material: Acetal / Stainless steel Price 17,50 SKU: 1200-SST-004

6 MARES MARES COMBINED HP SEAT REMOVAL AND INSTALLATION TOOL Two tools for the price of one. With this tool you can remove or assemble the HP seat in Mares diaphragm first stage body s (MR22 and MR12). Because of the soft material you will not scratch or damage the metal parts of the first stage. With the other end of the tool you can easily remove the HP seat. Material: Acetal / Stainless steel Price 12,60 SKU: 1200-SST-049 MARES DEMAND LEVER VALVE AND POPPET ASSEMBLY TOOL Putting in the small steel rod and the HP seat in its place is a special job, but by using this tool it slides into place the right way. Also the tool can be used to instal the demand lever of the second stage. Material: Acetal Price 13,50 SKU: 1000-SST-054 MARES INFLATOR DEFLATION BUTTON TOOL Removing and inserting of the small plastic ring together with it s O-ring located in the bottom part of the inflator can be done without any problems by using this tool. Material: Acetal Price 10 SKU: 1000-SST-050

7 MARES MARES HP VALVE SEAT INSTALLATION AND REMOVAL TOOL This tool will remove and instal the HP seat. When removing put the seat use compressed air by pumping it in and decrease the pressure on the tool so that the seat can come loose from the housing of the first stage body. Material: Acetal Price 11 SKU: 1000-SST-058 MARES GUIDE BUSHING FOR MR12 SERIES Installing all the small parts on top of the spring in the first stage body of the Mares MR12 is not an easy thing to do, but this tool will help the parts slide into place and therefore giving the technician room to put the cir-clip in its place. Material: Acetal Price 5 SKU: 1000-SST-047 MARES 2ND STAGE VALVE ASSEMBLY TOOL Installing poppet assemblies is something of an acrobatic stunt but when using this tool it makes your job an easy one. Material: Acetal Price 8,10 SKU: 1000-SST-052

8 MARES MARES HP SEAT REMOVAL TOOL Removing HP seats of diaphragm first stages such as the MR22 and MR12 will be an easy job when using this tool. Material: Acetal / Stainless steel Price 7 SKU: 1200-SST-050 MARES HP SEAT INSTALLATION TOOL This tool will instal the HP seat. in several Mares first stages. Material: Acetal Price 10 SKU: 1000-SST-057 SPECIALIZED TOOLS POSEIDON POSEIDON JETSTREAM FIRST STGE TOOL SET Price 17,50 This tool is used to correctly assemble the internal parts of your Poseidon Jetstream first stage (model; 3720 and 3790). The part is used as a fixture for the following parts: Valve center with O-rings Valve seat with O-ring Valve piston Spring Material: Acetal / Stainless steel SKU: 1000-SST-004

9 POSEIDON POSEIDON JETSTREAM AND XSTREAM VALVE HOUSING TOOL This tool is used to disassemble and assemble the valve housing of the Poseidon Jetstream and Xstream second stages. Material: Aluminum / Stainless steel Price 29 SKU: 1000-SST-004 POSEIDON JETSTREAM / XSTREAM VALVE HOUSING O-RING INST. TOOL Installing the O-ring back into the valve housing of the Poseidon Jetstream and Xstream second stages. Material: Acetal Price 17 SKU: 1000-SST-002 POSEIDON VALVE SEAT TOOL FOR CYKLON FIRST STAGE This tool is designed to remove and instal the teflon valve seat of the Poseidon Cyklon first stage. Material: Acetal / Brass Price 18 SKU: 1210-SST-001

10 POSEIDON POSEIDON CYKLON 300 LOCKING NUT SCREW TOOL This tool can be used to open and close the small locking nut on top of the filter of the Poseidon Cyklon 300 Material: Acetal / Stainless steel Price 14 SKU: 1200-SST-005 SPECIALIZED TOOLS SCUBAPRO SCUBAPRO MK16, MK18 AND TUSA R400 BALANCING CHAMBER TOOL This tool is used to open en close the Scubapro Mk16 or MK18 and the Tusa R400 first stage balance chamber. Material: Stainless steel Price 15 SKU: 2000-SST-002 SCUBAPRO AIR-2 TOOL SET This tool will open the round exhaust valve cover of the side of the AIR-2 regulator the other side of the tool is used to assemble and disassemble the poppet lever assembly in the air barrel. Also in the set is the 3/16 extra long hex key used to adjust the orifice on some AIR-2 models. Material: Aluminium / Brass Price 29 SKU: 3000-SST-013

11 SCUBAPRO SCUBAPRO MK17, MK11 AND TUSA RS460 COMBINED HP SEAT TOOL This tool is used to remove and install the HP seat of the Scubapro MK17, MK11 and Tusa RS460 first stage. Material: Acetal / Stainless steel Price 9 SKU: 1200-SST-002 SCUBAPRO R095, R380, R390, S550 AND G500 COVER TOOL When removing the cover of several Scubapro second stages including the R095, R380, R390, S550 and the G500 this tool is the perfect solution. Material: Acetal Price 14 SKU: 1000-SST-059 SCUBAPRO MK20, MK21, MK25 BUSHING TOOL Some of the Scubapro first stages use a bushing arrangement to help with the movement of the piston during diving. Installing these bushing rings and the small O-ring inbetween them is made easy when you use this bushing tool. Material: Acetal Price 12 SKU: 1000-SST-034

12 SCUBAPRO SCUBAPRO BCD TOOL This BCD tool is used to open all valves attached to most Scubapro BCD s. Because of the big square opening in the middle, it can also be used to open the valve connected to the inflator assembly on top of the jacket. Material: Acetal / Stainless steel Price 20 SKU: 1200-SST-035 SCUBAPRO COVER TOOL FOR R190 AND G250 Lots of time te cover of the 2nd stage is screwed on to tight or the technician is unable to remover it because of dirty threats. This tool will assist in removing the cover of the Scubapro R190 and G250 2nd stages. Material: Acetal / Aluminium / Stainless steel Price 10 SKU: 1300-SST-032 SCUBAPRO MK5, MK6, MK10 INTERNAL O-RING TOOL SET Ever tried to put a new O-ring into the main body of a Scubapro MK10 first stage? With this tools the job is done in a matter of seconds. Place two of the parts of this toolset on the top and bottom of the first stage body and push the O-ring into its place with the small rod of the toolset. Price 13 Material: Acetal SKU: 1000-SST-026

13 SCUBAPRO SCUBAPRO SECOND STAGE PLUG TOOL Scubapro housing plugs always need a 1/4 of a turn to put them into place or take them out of the housing during service, use this tool will make this job a piece of cake. Material: Acetal / Stainless steel Price 7 SKU: 1200-SST-033 SCUBAPRO D300, D350 AND D400 2 IN 1 TOOL This tool will open the big black and small silver nut located on the outside of the regulator body Material: Acetal / Stainless steel Price 15 SKU: 1200-SST-059 SCUBAPRO MK5, MK6, MK7, MK10, MK20 SEAT RETAINER SOCKET For the easy removal and installation of the seat retainer found on the Scubapro models MK5, MK10 and MK20 first stage. Material: Acetal / Stainless steel Price 14 SKU: 1200-SST-001

14 SCUBAPRO SCUBAPRO DIN RETAINING KNOB O-RING INSTALLATION BULLET DIN retaining knobs have big and sharp threats and putting an O-ring over these threats most of the time damages the O-ring. By using this small bullet the job is done quick and the O-ring is still in perfect condition. Material: Acetal Price 5 SKU: 1000-SST-028 SCUBAPRO R295 COVER TOOL Lots of time te cover of the 2nd stage is screwed on to tight or the technician is unable to remover it because of dirty threats. This tool will assist in Removing the cover of the Scubapro R295 2nd stages. Material: Aluminium Price 7 SKU: 3000-SST-030 SCUBAPRO DRIFT TOOL FOR DIAPHRAGM FIRST STAGES To make the removal and installation of the high pressure seats as well as the small backup O-ring and washer in the body s of the Scubapro MK11, MK16, MK17 and the MK18 a piece of cake. Material: Acetal Price 9 SKU: 1000-SST-027

15 SEAC SEAC SORIUS SPRING RETAINER RING TOOL This tool is used to remove the teflon spring retainer screw that is located in the Sorius and the Sorius ADJ second stage valve barrel. Material: Brass Price 19 SKU: 4000-SST-001 SPECIALIZED TOOLS SHERWOOD SHERWOOD MAGNUM CW ENVIRONMENTAL CAP TOOL Light-weight aluminium key with 3-pins that perfectly fit into the environmental end cap of the Sherwood Magnum first stage. Material: Aluminium Price 17 SKU: 3000-SST-001 SPECIALIZED TOOLS SUUNTO SUUNTO GUIDING PIN FOR QUICK DISCONNECT This tool will help the technician reinstalling the O-rings on the Suunto quick release connector. Material: Aluminium Price 19 SKU: 2000-SST-055

16 OCEANIC OCEANIC / 2ND STAGE POPPET HOLDER (3 SLOTS) Holding the poppet in position can be done with this tool while the technician is screwing down the nylon nut. This tool fits poppets which have 3 tabs. Material: Aluminium Price 9 SKU: 3000-SST-003

17 UNIVERSAL Universal tools can be used for all brands of scuba gear. Besides the general workshop tools there are some specialized tools that should be present in every technicians work shop. These tools are listed in this section of our catalog. UNIVERSAL SLOTTED 2 IN 1 CAP DRIVER TOOL This tool is used when removing and installing the slotted cap found on manny first stages. because both ends have different sizes it fits on a wide variety of slotted caps. The tool can be used as a hand tool or with a 14mm or 3/4 (socket) wrench. Price 16 Material: Aluminium SKU: 2000-SST-003 UNIVERSAL CILINDER VALVE TOOL This tool is for the removal and installation of valve handwheel nuts. It fits most manufacturer s valves. Material: Acetal / Stainless steel Price 16 SKU: 1200-SST-003

18 UNIVERSAL UNIVERSAL POWER INFLATOR TOOL When installing or removing the internal assembly as well as the inflator button from several brands like Sherwood, Hollis and Apeks this tool comes in handy. Material: Stainless steel Price 17,10 SKU: 2000-SST-057 UNIVERSAL BULLIT FOR INSTALLING O-RING ON PISTON This bullet will fit most common models of piston first stages. Below some examples: Scubapro MK2, Aqualung Calypso, Mares R2S, Sherwood Brut, Cressi AC2 and more... Material: Brass Price 7 SKU: 4000-SST-044 UNIVERSAL SLOTTED ORIFICE DRIVER When removing and installing the slotted orifice that is used in most second stage regulators, this tool comes in handy. The handle on the tool is knurled for a better grip. Material: Stainless steel Price 14 SKU: 2000-SST-037

19 UNIVERSAL DIN RETAINER TOOL UNIVERSAL Having problems getting a broken (rounded hex key) DIN connector of a first stage. This tool supported in your vise will get the connector to come loose. Material: Aluminum Price 9,90 SKU: 000-SST-043 UNIVERSAL FILTER RETAINER MOUNTING TOOL Installing the star washer in a straight way is made easy with this tool. Just push it on top of the star washer and the filter and the combination will be installed in its right place. Material: Aluminium Price 6,30 SKU: 3000-SST-022 UNIVERSAL ORIFICE SEAT EXTRACTOR TOOL Taking the orifice out of the second stage barrel or 2nd stage inlet fittings can be a difficult job. Using this tool it does not matter if you have a Hex or slotted orifice, just push it in slowly and pop the small orifice out. Material: Acetal Price 3 SKU: 1000-SST-061

20 UNIVERSAL UNIVERSAL HP AND LP O-RING INSTALLATION BULLIT SET Regulator hoses also need new O-rings during service but because of the sharp threats many of these O-rings get damaged in the process of putting them on. Whit this tool your O-rings stay in perfect shape, just put the tool over your hose and slide the O-ring in place. Material: Brass Price 12 SKU: 4000-SST-045 UNIVERSAL HP SWIVEL O-RING INSTALLATION ASSIST TOOL The HP swivel is a tiny part and most of the time it is difficult to put O-rings on the small HP swivel. By using this tools the work gets done in a matter of seconds. Material: Acetal Price 6 SKU: 1000-SST-046 UNIVERSAL HEAVY DUTY FIRST STAGE HOLDER This heavy-duty first stage holder has two different sides one is a LP with 3/8 UNF threads and the other one is a HP with 7/16 UNF threads. The best way to use this tool is by clamping it in your vise so you have your hands free to work on your equipment. Material: Stainless steel Price 17 SKU: 2000-SST-001

21 UNIVERSAL UNIVERSAL FIRST STAGE HOLDER This first stage holder has two different sides one is a LP with 3/8 UNF threads and the other one is a HP with 7/16 UNF threads. The best way to use this tool is by clamping it in your vise so you have your hands free to work on your equipment. Material: Stainless steel Price 11,70 SKU: 2000-SST-056 UNIVERSAL HP SEAT EXTRACTOR TOOL Getting the HP seat out of many piston first stages is proved to be a problem. When using this tool the HP seat will come out of the piston when it is placed over the tool and a little pressure is applied on the piston. Material: Acetal / Stainless steel Price 10,80 SPECIALIZED TOOLS SKU: 1200-SST-039 TOOL KITS SCUBAPRO STARTER KIT This kit has all the tools needed to start service on Scubapro Regulator sets. This kit consists of: Hp and Lp O-ring installation bullet set, Filter retainer mounting tool, DIN retainer tool, HP seat extractor tool, Bullet for installing O-ring on piston, Orifice seat extractor tool, HP swivel O-ring installation tool, D400 2 in 1 tool, MK10 internal O- ring tool set, DIN retaining knob O-ring bullet, MK5, 10, 20 seat retainer t-handle socket, Drift tool for diaphragm first stages, MK20, MK21, MK25 bushing tool, Second stage plug tool, Cover tool for R190/ G250. Price 119 SKU: 1800-SST-039

22 SCUBAPRO COMBI KIT TOOL KITS This kit has all the Scubapro tools combined with the most used general work shop tools. If you only service Scubapro regulators this is the ideal kit to start with. This kit consists of: R295 cover tool, BCD tool, Cover tool for R190 and G250, MK10 internal O-ring tool set, Second stage plug tool, D400 2 in 1 tool, DIN retaining knob O-ring installation bullet, MK20, MK21, MK25 bushing tool, Drift tool, MK5, MK10, MK20 seat retainer T-handle socket, Internal cir clip pliers, Nutdriver 5,5mm, Nut-driver 1/4, 1/4 male inside to 3/8 drive, Socket wrench 3/8 drive, 3/8 to hex 5mm long, 3/8" to hex 1/4, 3/8 to Torx 30, 3/8" to hex 5/32, 3/8" to hex 7/32, 3/8" to hex 8mm long, Adjustable wrench 150mm, Combined wrench 1/4, Wrench 5/8 to 11/16, Wrench 3/4 to 13/16, Wrench 17-19, Set of 4 O-ring hooks, Adjustable hook spanner. Price 401,20 SKU: 1800-SST-046 MARES STARTER KIT This kit has all the tools needed to start service on Mares Regulator sets. This kit consists of: HP swivel O-ring installation assist tool, HP and LP O-ring installation bullet set, Filter retainer mounting tool, DIN retainer tool, HP seat extractor tool, Bullet for installing O-ring on piston, Orifice seat extractor tool, Second stage valve assembly tool, Poppet and pin installation tool, Mares guide busing for MR12 series, HP seat removal tool, HP valve seat installation-removal tool, HP seat installation tool, Inflator deflation button tool, Combined HP seat removal and installation tool. Price 113,90 SKU: 1800-SST-040 MARES COMBI KIT This kit has all the Mares tools combined with the most used general work shop tools. If you only service Mares regulators this is the ideal kit to start with. This kit consists of: Second stage valve assembly tool, Poppet and pin installation tool, Mares guide bushing for MR12 series, HP seat removal tool, HP valve seat installation and removal tool, HP seat installation tool, Inflator deflation button tool, Combined HP seat installation and removal tool, Internal cir clip pliers, Nut-driver 5,5mm, Nut-driver 1/4, 1/4 male inside to 3/8 drive, Socket wrench 3/8 drive, 3/8 to hex 5mm long, 3/8" to hex 1/4, 3/8 to Torx 30, 3/8" to hex 5/32, 3/8" to hex 7/32, 3/8" to hex 8mm long, Adjustable wrench 150mm, Combined wrench 1/4, Wrench 5/8 to 11/16, Wrench 3/4 to 13/16, Wrench 17-19, Set of 4 O-ring hooks, Adjustable hook spanner. Price 396,10 SKU: 1800-SST-047

23 AQUALUNG STARTER KIT TOOL KITS This kit has all the tools needed to start service on Aqualung Regulator sets. This kit consists of: HP swivel O-ring installation assist tool, HP and LP O-ring installation bullet set, Filter retainer mounting tool, DIN retainer tool, HP seat extractor tool, Bullet for installing O-ring on piston, Orifice seat extractor tool, 3 in 1 power inflator tool, T-handle socket for Tita-LX Supreme and Core supreme end cap, Titan-LX HP seat installation and removal tool, Second stage setting tool, second stage poppet holder (3 slots), 2nd stage diaphragm retainer tool. Price 116,45 SKU: 1800-SST-049 AQUALUNG COMBI KIT This kit has all the Aqualung tools combined with the most used general work shop tools. If you only service Aqualung regulators this is the ideal kit to start with. This kit consists of: 3 in 1 power line inflator tool, T-handle socket for titan-lx-supreme and Core Supreme end cap, Titan LX HP seat installation and removal tool, Second stage setting tool, Second stage poppet holder (3 slots), second stage diaphragm retainer tool, Internal cir clip pliers, Nut-driver 5,5mm, Nut-driver 1/4, 1/4 male inside to 3/8 drive, Socket wrench 3/8 drive, 3/8 to hex 5mm long, 3/8" to hex 1/4, 3/8 to Torx 30, 3/8" to hex 5/32, 3/8" to hex 7/32, 3/8" to hex 8mm long, Adjustable wrench 150mm, Combined wrench 1/4, Wrench 5/8 to 11/16, Wrench 3/4 to 13/16, Wrench 17-19, Set of 4 O-ring hooks, Adjustable hook spanner. Price 398,65 SKU: 1800-SST-048 UNIVERSAL STARTER KIT This kit has all the universal tools needed to start service on scuba gear. This kit consists of: Slotted orifice driver, BCD tool, HP and LP O-ring installation bullet set, Filter retainer mounting tool, AIR gun, HP seat extractor tool, Bullet for installing O-ring on piston, Orifice seat extractor tool, Magnetic vise jaws, First stage holder 3/8 to 7/16 (HP and LP ports), Schrader valve tool, DIN retainer tool. Price 129,20 SKU: 1800-SST-044

24 TOOL KITS UNIVERSAL COMBI KIT This kit has all the Universal tools combined with the most used general work shop tools. Complete kit consists of: HP swivel O-ring installation tool, HP and LP O-ring bullet set, First stage holder, Slotted orifice driver, Filter retainer mounting tool, DIN retainer tool, HP seat extractor tool, Orifice seat extractor tool, Bullet for installing O-ring on piston, Power inflator tool (Apes, Hollis, Sherwood), Internal cir clip pliers, Nutdriver 5,5mm, Nut-driver 1/4, 1/4 male inside to 3/8 drive, Socket wrench 3/8 drive, 3/8 to hex 5mm long, 3/8" to hex 1/4, 3/8 to Torx 30, 3/8" to hex 5/32, 3/8" to hex 7/32, 3/8" to hex 8mm long, Adjustable wrench 150mm, Combined wrench 1/4, Wrench 5/8 to 11/16, Wrench 3/4 to 13/16, Wrench 17-19, Set of 4 O-ring hooks, Adjustable hook spanner. Price 411,40 SKU: 1800-SST-050 GENERAL WORKSHOP TOOLS STARTER KIT This kit consists of all tools needed in a dive center work shop (The picture does not show all tools in this kit.) The complete kit consists of: Schrader valve key, Internal cir clip pliers, Stainless steel side cutters, Nut-driver 5,5mm, Nut-driver 1/4, Screwdriver Philips size PH-1, Screwdriver slotted, Allen key set metric, Adjustable wrench 150mm, Set of 4 O-ring hooks, Hemostat Forceps, Knipex pliers wrench, Adjustable face tool 1,5mm, Air gun, Wrench 32mm Price 228,65 SKU: 1800-SST-045 GENERAL WORKSHOP TOOLS PROFESSIONAL KIT Price 599,04 This kit consists of all tools needed in a dive center work shop (the picture does not show all tools in this kit.) The complete kit consists of: Internal cir clip pliers, Stainless steel side cutters, Nut-driver 5,5mm, Nut-driver 1/4, 1/4 male inside to 3/8 drive, Socket wrench 3/8 drive, Screwdriver Philips size PH-0, Screwdriver Philips size PH-1, Screwdriver slotted, Screwdriver set Philips / pozidrive, Screwdriver set slotted, Allen key set metric, Flat nose pliers, Bent nose pliers, 3/8 to hex 5mm long, 3/8" to hex 1/4, 3/8 to Torx 30, 3/8" to hex 5/32, 3/8" to hex 6mm long, 3/8" to hex 7/32, 3/8" to hex 8mm long, Torque wrench 6-30 Nm, T-bar 3/8, Adjustable wrench 150mm, Adjustable wrench 200mm, Combined wrench 1/4, Wrench 32mm, Wrench 34mm, Wrench 5/8 to 11/16, Wrench 3/4 to 13/16, Wrench 17-19, Set of 4 O-ring hooks, Hemostat Forceps, Knipex pliers wrench, Adjustable face tool 1,5mm, Adjustable hook spanner SKU: 1800-SST-038

25 O-RINGS Having the right O-ring makes all the difference. Many items of scuba diving equipment contain rubber O-rings that will perish, dry out and develop cracks as time goes by. Even if the dive gear is not used, once it is a few years old, all the O-rings will need replacing. At Scuba Service Tools we do not only offer scuba tools for O-rings but also the actual O-rings. Our stock consists of the standard Nitrile (soft) type as well as the extrusion resistant (hard) Nitrile type and EPDM O-rings. Use the right tools when working with O-rings, even the smallest damage can make your equipment malfunction. All of our O-rings are stored and packet properly so you don't have to worry about getting improper stock. O-RINGS COLLECTION BOXES SCUBAPRO O-RING COLLECTION-BOX This box contains 17 of the most commonly used Scubapro O-rings. O-rings in box: 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x Price 70,28 SKU: 5000-SST-054 MARES O-RING COLLECTION-BOX This box contains 11 of the most commonly used Mares O- rings. O-rings in box: 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x / 10x Price 51,52 SKU: 5000-SST-056

26 O-RINGS COLLECTION BOXES SHERWOOD O-RING COLLECTION-BOX This box contains 21 of the most commonly used Sherwood O-rings. O-rings in box: 10x G006B / 10x / 10x G014C / 10x G011B / 10x / 10x / 10x / 10x G025A / 10x G106B / 10x G010A-SHV7066 / 10x G015C / 10x SHV7064 / 10x SHV7071 / 10x SHV7083 / 10x SHV7082 / 10x SHV7080 / 10x G007A / 10x G022A / 10x / 5x / 10x Price 84,00 SKU: 5000-SST-057 SUUNTO O-RING COLLECTION-BOX This box contains 6 of the most commonly used Suunto O- rings. To be used on the following computers: 5x Stinger -Spyder / 10x Vyper -Vyper2 -Favour -Favour Air Lux - Cobra -Cobra 2 - Cobra 3 -Zoop -Vytec -Eon / 5x D4 / 5x D9 / 5x Transmitter / 10x Zoop Novo Price 68,60 SKU: 5000-SST-058 O-RINGS MARES SKU code Mares part number Price 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (epdm) 6,16 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,76 (Bag of 10 pieces) 5000-SST (epdm) 6,80 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,80 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,00 (Bag of 10 pieces) 5000-SST (epdm) 5,60 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 6,00 (Bag of 10 pieces) 5000-SST (epdm) 6,00 (Bag of 10 pieces) 5000-SST (epdm) 6,80 (Bag of 10 pieces) 5000-SST (epdm) 18,00 (Bag of 5 pieces)

27 O-RINGS SCUBAPRO SKU code Scubapro part number Price 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (epdm) 7,12 (Bag of 10 pieces) 5000-SST (epdm) 6,16 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,36 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (nbr hard sh 90) 4,76 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,56 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,36 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (epdm) 7,44 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,96 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 7,52 (Bag of 10 pieces) 5000-SST (epdm) 9,36 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 7,92 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,04 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,16 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,76 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 7,12 (Bag of 10 pieces) 5000-SST (epdm) 7,28 (Bag of 10 pieces) 5000-SST (epdm) 11,50 (Bag of 5 pieces) 5000-SST (viton) 38,00 (Bag of 5 pieces) O-RINGS SHERWOOD SKU code Sherwood part number Price 5000-SST-001 G006B / (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST-018 G014C (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST-019 G011B (nbr soft sh 70) 4,80 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 4,00 (Bag of 10 pieces) 5000-SST (epdm) 6,80 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 6,80 (Bag of 10 pieces) 5000-SST-037 G025A (nbr soft sh 70) 6,80 (Bag of 10 pieces) 5000-SST-038 G106B (nbr soft sh 70) 3,60 (Bag of 10 pieces) 5000-SST-039 G010A / SHV7066 (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST-040 G015C (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST-041 SHV7064 (nbr soft sh 70) 4,40 (Bag of 10 pieces) 5000-SST-042 SHV7071 (nbr soft sh 70) 4,00 (Bag of 10 pieces) 5000-SST-043 SHV7083 (nbr soft sh 70) 6,80 (Bag of 10 pieces) 5000-SST-044 SHV7082 (nbr soft sh 70) 6,00 (Bag of 10 pieces) 5000-SST-045 SHV7080 / (nbr soft sh 70) 6,80 (Bag of 10 pieces) 5000-SST-046 G007A (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST-050 G022A (nbr soft sh 70) 6,80 (Bag of 10 pieces) 5000-SST (nbr soft sh 70) 5,20 (Bag of 10 pieces) 5000-SST (poly) 11,60 (Bag of 5 pieces) 5000-SST (nbr soft sh 70) 4,40 (Bag of 10 pieces)

28 O-RINGS SUUNTO SKU code Suunto part number Price 5000-SST-031 Stinger (epdm) 10,00 (Bag of 5 pieces) 5000-SST-031 Spider (epdm) 10,00 (Bag of 5 pieces) 5000-SST-032 Vyper (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Vyper 2 (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Favour 16,00 (Bag of 5 pieces) 5000-SST-032 Favour Air Lux (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Cobra (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Cobra 2 (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Cobra 3 (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Zoop (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Vytec (epdm) 16,00 (Bag of 5 pieces) 5000-SST-032 Eon (epdm) 16,00 (Bag of 5 pieces) 5000-SST-033 Transmitter (epdm) 16,00 (Bag of 5 pieces) 5000-SST-034 D4 (epdm) 10,00 (Bag of 5 pieces) 5000-SST-035 D9 (epdm) 22,00 (Bag of 5 pieces) 5000-SST-068 Suunto Novo (nbr soft sh 70) 8,00 (Bag of 10 pieces) O-RINGS AQUALUNG COMING SOON In need of bigger packages of O-rings, no problem! Just contact us by using our contact form on and we will send you an offer.

29 GENERAL WORKSHOP TOOLS 3/8 TO HEX 5MM (LONG) Hex 5mm long key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille Fits on some of the Mares first stage regulators. Brand: Stahlwille Price 19,00 SKU: 1800-SST-005 3/8 TO HEX 6MM (LONG) Hex 5mm long key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille This is one of the most used hex keys in a divers workshop it fits on the DIN inlet fittings of most brands: Scubapro, Apeks, Aqualung, Dive Rite, Mares and many more. Brand: Stahlwille Price 19,00 SKU: 1800-SST-006 3/8 TO HEX 8MM (LONG) Hex 5mm long key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille To install or remove the environmental cap of the Aqualung Legend. Also to be used on the the spring adjuster of the Titan, Titan LX, Core, Legend and Mikron.. Brand: Stahlwille Price 19,00 SKU: 1800-SST-007

30 GENERAL WORKSHOP TOOLS 3/8 SLIDING T-HANDLE 3/8" sliding T-handle Brand: Stahlwille Price 16,00 SKU: 1800-SST-024 STAHLWILLE 1/4 MALE INSIDE TO 3/8 OUTSIDE ADAPTER 1/4" male inside to 3/8" outside adapter to be used with our torque wrench Brand: Stahlwille Price 9,00 SKU: 1800-SST-012 STAHLWILLE CONNECTION 3/8 TO TORX 30 Torx 30 key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille. To remove the torx screws out of the cap from the Scubapro MK21 first stage. Brand: Stahlwille Price 19,00 SKU: 1800-SST-008

31 GENERAL WORKSHOP TOOLS STAHLWILLE CONNECTION 3/8 TO 7/32 Hex 7/32" key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille. Ideal to remove the swivel retainer of the Scubapro MK25 & MK10 first stages. Brand: Stahlwille Price 24,00 SKU: 1800-SST-003 STAHLWILLE CONNECTION 3/8 TO 5/32 Hex 5/32" key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille Brand: Stahlwille Price 19,00 SKU: 1800-SST-004 STAHLWILLE CONNECTION 3/8 TO 1/4 Hex 3/8" key with connection to 3/8" Socket Wrench 1st class quality tool from the German brand Stahlwille. Brand: Stahlwille Price 19,00 SKU: 1800-SST-001

32 GENERAL WORKSHOP TOOLS 35 TO 60MM ADJUSTABLE HOOK SPANNER 35 to 60mmm Adjustable hook spanner to be used for almost all brands to install or remove 1st stage regulators caps. Brand: Stahlwille Price 26,00 SKU: 1800-SST-035 1,5MM ADJUSTABLE FACE SPANNER This tool is something a technician can't do without, it can be used for several different brands and parts of diving gear. Pin size is 1,5mm. Brand: AMF Price 12,00 SKU: 1800-SST-034 SOCKET WRENCH 3/8 DRIVE Socket wrench 3/8" drive The ratchet is equipped with a socket lock/release system. Brand: Format Price 39,00 SKU: 1800-SST-010

33 GENERAL WORKSHOP TOOLS UNIVERSAL HOSE WRENCH 9/16 TO 5/8 Wrench imperial sizes of 9/16" to 5/8" This wrench fits on about 85% of all scuba hoses and therefore it s the ideal wrench to have in your scuba gear bag. Brand: Gedore Price 17,50 SKU: 1800-SST-055 WRENCH 8/8 TO 11/16 Wrench imperial sizes of 5/8" to 11/16" This wrench fits ideal on Apeks and Aqualung second stages. Brand: Stahlwille Price 19,00 SKU: 1800-SST-030 WRENCH 3/4 TO 13/16 Wrench 3/4" to 13/16" Fits on most older Aqualung second stages. Brand: Stahlwille Price 23,00 SKU: 1800-SST-029

34 GENERAL WORKSHOP TOOLS STANDARD WRENCH 17 TO 19MM Wrench 17mm - 19mm Can be used for lots of jobs in a scuba service center and is ideal for many Mares second stage to hose connections. Brand: Format Price 9,00 SKU: 1800-SST-025 SMAL COMBINATION WRENCH 1/4 Combination wrench 1/4" Ideal when taking of or putting on second stage poppet nuts. Brand: Gedore Price 14,00 SKU: 1800-SST-026 WRENCH 32MM Single Open End Wrench 32mm. Material: Vanadium steel, manganese phosphated Brand: Bahco Price 13,00 SKU: 1800-SST-027

35 GENERAL WORKSHOP TOOLS WRENCH 34MM Single Open End Wrench 34mm. Material: Vanadium steel, manganese phosphated Brand: Gedore Price 13,00 SKU: 1800-SST MM ADJUSTABLE SPANNER Adjustable spanner of strong carbon steel. 150mm with a range from 0 to 18mm Brand: Format Price 19,00 SKU: 1800-SST MM ADJUSTABLE SPANNER Adjustable spanner of strong carbon steel. 200mm with a range from 0 to 25mm Brand: Format Price 22,00 SKU: 1800-SST-032

36 GENERAL WORKSHOP TOOLS SOCKET WRENCH 3/8 DRIVE This high-quality torque wrench has a working range of 6-30 Nm. The connection is a 1/4" drive. This torque wrench is a tool that can not be missed in any technicians workshop. Brand: Maxxcon Price 89,00 SKU: 1800-SST-011 SCREWDRIVER SLOTTED Screwdriver slotted. Brand: Format Price 13,00 SKU: 1800-SST-019 SCREWDRIVER PH-1 PHILIPS Screwdriver Philips size PH-1. Brand: Format Price 13,00 SKU: 1800-SST-018

37 GENERAL WORKSHOP TOOLS SCREWDRIVER PH-0 PHILIPS Screwdriver Philips size PH-0. Brand: Format Price 13,00 SKU: 1800-SST-017 NUTDRIVER 1/4 Nut-driver 1/4. Brand: Format Price 13,00 SKU: 1800-SST-014 NUTDRIVER 5.5MM Nut-driver 5,5MM. Brand: Format Price 13,00 SKU: 1800-SST-013

38 GENERAL WORKSHOP TOOLS SCREWDRIVER SET Screwdriver set Philips/SlottedHex/Torx set of 12 screwdrivers. Slotted: 1,5 / Slotted: 1,8 / Slotted: 2,0 / Slotted: 2,5 / Slotted: 3,0 / Philips: 00 / Philips: 0 / Hex: 0,9 / Hex: 4,5 / Hex: 2,0 / Torx: 5 / Torx: 6 Brand: Waer Price 49,00 SKU: 1800-SST-015 SCREWDRIVER SET Screwdriver set Philips/SlottedHex/Torx set of 16 screwdrivers. Slotted: 1,5mm / Slotted: 2,0mm / Slotted: 2,5mm / Philips: 00 / Philips: 0 / Philips: 1 / Torx: 6 / Torx: 7 / Torx: 8 / Torx: 9 / Torx: 10 / Hex: 2,0 / Hex: 2,5 / Hex: 3,0 Brand: HBM Price 19,00 SKU: 1800-SST-016 KNIPEX PLIERS WRENCH Replaces the need for sets of metric and imperial spanners Smooth jaws for damage free installation of plated fittings Working directly on chrome! Brand: Knipex Price 92,00 SKU: 1800-SST-033

39 GENERAL WORKSHOP TOOLS INTERNAL CIRCLIP PLIERS Internal Circlip pliers. Brand: Format Price 17,00 SKU: 1800-SST-023 SIDE CUTTERS Side cutters, Stainless steel. Brand: Format Price 11,00 SKU: 1800-SST-020 BEND NOSE PLIERS Bent nose pliers. Brand: Format Price 17,00 SKU: 1800-SST-022

40 GENERAL WORKSHOP TOOLS FLAT NOSE PLIERS Flat nose pliers. Brand: Format Price 15,00 SKU: 1800-SST-021 HERMOSTAT FORCEPS Hermostat forceps with bend or strait nose. Brand: HBM Price 6,00 SKU: 1800-SST-037 (bent tip) / SKU: 1800-SST-009 (straight tip) ALLEN KEY SET METRIC The kit contains 9 pieces of ball ended hex keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm. A must for every serious technician. Brand: Format Price 14,00 SKU: 1800-SST-002

41 GENERAL WORKSHOP TOOLS MAGNETIC VISE JAWS 100 mm aluminium jaws with a V-groove will make sure you have a secure grip on your equipment being hold in your vise. So they stick on your vice the jaws are fitted with small magnets on the inside. Price 19,00 SKU: 1800-SST-041 AIR GUN Air gun with a connection for an air compressor. Price 15,00 SKU: 1800-SST-043 SCHRADER VALVE TOOL When removing the Schrader valve that is used in some BCD inflators as well as inflator hoses this tool comes in handy. Price 9,00 SKU: 1800-SST-042

42 INSTRUMENTATION 2ND STAGE IN_LINE ADJUSTMENT TOOL This specialized tool connects in-line between the 2nd stage regulator and the LP hose, allowing adjustments while the hose is pressurized. Using the included pressure gauge the intermediate pressure (IP) of the first stage is adjusted if necessary. Price 115,00 SKU: 1800-SST-052 DIGITAL MAGNEHELIC METER For measuring differential pressure it is used to set up the inhalation effort for 2nd stages. Price 84,99 SKU: 1800-SST-053 MOUTHPIECE ADAPTER FOR MAGNEHELIC METER This adapter is used to connect the second stage regulator (when mouthpiece removed) to a digital magnehelic meter used for setting up or checking the cracking effort. Price 19,00 SKU: 1800-SST-003

43 INSTRUMENTATION INTERMEDIATE PRESSURE GAUGE FOR INFLATOR HOSE The compact {1.5 in 3.8 cm } diameter ultra-lightweight dualscale (PSI and BAR) intermediate pressure gauge is ready to go with you anywhere. Perfect for helping diagnose problems in the field, it plugs into any standard BC low pressure inflator hose. Price 19,00 SKU: 1800-SST-054 SHIPPING Fast and reliable delivery to any destination worldwide Webshop: After filling your basket in our webshop the total of your shipping expenses is automatically calculated at check-out, based on the shipping destination and weight of your items. You will have the option to choose between: Standard shipping Shipping with track & trace with insurance. Our goods are packed in boxes or padded envelopes to make sure your goods are reaching their destination without damaging. By This option is for dive centers only, use our SKU codes for your order and send it by to info@divingondemand.com Companies inside EU but outside The Netherlands can receive an invoice without VAT if provided full company details and VAT number. To make sure your invoice is without VAT, please contact us by or make a note during the order process. VAT paid in advance will be refunded once the data has been checked and the order is processed.