Metric Hose End Fittings to Braided AQP Hose
|
|
|
- Liliana Lambert
- 5 years ago
- Views:
Transcription
1 ack to HOME Metric Hose End Fittings to raided QP Hose T Inc. offers a comprehensive line of Metric to -N hose ends and adaptors. luminum hose ends attach easily to popular -N braided hose and fit directly to common metric s found on many European & sian automobiles. Plumbing aftermarket oil and fuel components or replacing/modifying O.E. factory hoses has never been easier. T can also supply adaptors to convert from Metric to -N for use with commonly available -N hose and fittings products. See the next page for more information and pricing. STRIGHT HOSE END M12x1.5 X -4N M12x1.5 X -6N M14x1.5 X -6N M16x1.5 X -6N M16x1.5 X -8N M18x1.5 X -8N M18x1.5 X -10N M22x1.5 X -10N M26x1.5 X -12N M30x1.5 X -12N M30x1.5 X -16N 45 DEGREE HOSE END M12x1.5 X -4N M12x1.5 X -6N M14x1.5 X -6N M16x1.5 X -6N M16x1.5 X -8N M18x1.5 X -8N M18x1.5 X -10N M22x1.5 X -10N M26x1.5 X -12N M30x1.5 X -12N M30x1.5 X -16N 90 DEGREE HOSE END M12x1.5 X -4N M12x1.5 X -6N M14x1.5 X -6N M16x1.5 X -6N M16x1.5 X -8N M18x1.5 X -8N M18x1.5 X -10N M22x1.5 X -10N M26x1.5 X -12N M30x1.5 X -12N M30x1.5 X -16N Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
2 Metric Hose End Fittings New for 08: Our line of economically priced metric hose end fittings. These easy to assemble, taper-socket, swivel hose ends are constructed from 6061 alloy and supplied in an attractive black luster anodized finish. ngles, 45 and 90 degree, are one-piece bent tube construction with viton o-ring seals allowing 360 degree rotation and maximum fluid flow. We will still continue to offer the German manufactured (black/gold) forged, cutter-socket, type hose ends; as they are offered in some unique s, and forged angles are more compact where needed. Straight Metric Female to N Hose Straight Metric Female to -N Hose Metric -N Hose Part # Price $ 14mm -6N FS-1406 $ mm -6N FS-1606 $ mm -8N FS-1608 $ mm -8N FS-1808 $ mm -10N FS-1810 $ mm -10N FS-2210 $ mm -12N FS-2612 $ mm -12N FS-3012 $ mm -16N FS-3016 $ Metric Female to -N Hose 90 Metric Female to -N Hose NEW NEW Metric -N Hose Part # Price $ 14mm -6N F $ mm -6N F $ mm -8N F $ mm -8N F $ mm -10N F $ mm -10N F $ mm -12N F $ mm -12N F $ mm -16N F $65.70 NEW Metric -N Hose Part # Price $ 14mm -6N F $ mm -6N F $ mm -8N F $ mm -8N F $ mm -10N F $ mm -10N F $ mm -12N F $ mm -12N F $ mm -16N F $65.70 Metric -N Hose Part # Price $ 12mm -4N* FS-1204T $ mm -6N FS-1206F $ mm -6N FS-1406F $ mm -8N FS-1408F $ mm -6N FS-1606F $ mm -8N FS-1608F $ mm -8N FS-1808F $ mm -10N FS-1810F $ mm -10N FS-2210F $ mm -12N FS-2612F $ mm -12N FS-3012F $ mm -16N FS-3016F $64.00 *for -4N teflon lined hose 45 Forged Metric Female to N Hose Metric -N Hose Part # Price $ 12mm -4N* F T $ mm -6N F F $ mm -6N F F $ mm -8N F F $ mm -6N F F $ mm -8N F F $ mm -8N F F $ mm -10N F F $ mm -12N F F $ mm -12N F F $ mm -16N F F $89.95 *for -4N teflon lined hose 90 Forged Metric Female to N Hose ack to HOME Metric -N Hose Part # Price $ 12mm -4N* F T $ mm -6N F F $ mm -6N F F $ mm -8N F F $ mm -6N F F $ mm -8N F F $ mm -8N F F $ mm -10N F F $ mm -12N F F $ mm -12N F F $ mm -16N F F $89.95 *for -4N teflon lined hose Importer/Distributor- T Inc Matoaka Road. Sarasota, FL Prices subject to change without notice.
3 Metric Female x N Male -N Male x Metric Male Union (LLOY) ack to HOME female male part # M10x1.0-3N F10N3 M12x1.5-3N F12N3 M12x1.5-4N F12N4 M12x1.5-6N F12N6 M14x1.5-3N F14N3 M14x1.5-4N F14N4 M14x1.5-6N F14N6S M16x1.5-3N F16N3 M16x1.5-6N F16N6S M16x1.5-8N F16N8S M18x1.5-8N F18N8S M22x1.5-10N F22N10S M26x1.5-12N F26N12 M30x1.5-12N F30N12 M30x1.5-16N F30N16 "S" suffix fittings are steel- all others are alloy -N Male x Metric Male Union (STEEL) -N Metric part # -3N M10x1.0 M101N3S -3N M10x1.0 convex M101CV3S -3N M10x1.25 M10123S -3N M10x1.25 convex M1012CV3S -3N M10x1.5 M10N3S -3N M12x1.0 convex M121CV3S -4N M10x1.0 M101N4S -4N M10x1.0 convex M101CV4S -4N M10x1.25 M10124S -4NM 10x1.25 convex M1012CV4S -4N M10x1.5 M10N4S -4N M12x1.0 convex M121CV4S -4N M12x1.25 M12124S -4N M12x1.5 M12N4S -4N M14x1.5 M14N4S -6N M10x1.0 M101N6S -6N M12x1.5 M12N6S -6N M14x1.5 M14N6S -6N M16x1.5 M16N6S -6N M18x1.5 M18N6S -6N M20x1.5 M20N6S -8N M14x1.5 M14N8S -8N M16x1.5 M16N8S -8N M18x1.5 M18N8S -10N M16x1.5 M16N10S -10N M18x1.5 M18N10S -16N M26x1.5 M26N16S Except where noted fittings have concave (inverted flair) sealing surface. some s available in black -N Metric part # -3N M10x1.0 convex M101N3-3N M10x1.25 convex M N M12x1.0 convex M121N3-3N M12x1.25 M N M12x1.5 M12N3-3N M12x1.5 M12N3-3N M14x1.5 M14N3-3N M16x1.5 M16N3-3N M18x1.5 M18N3-3N M20x1.5 M20N3-4N M10x1.0 M101N4-4N M10X1.25 M N M12x1.0 convex M121N4-4N M12X1.25 M N M12x1.5 M12N4-4N M14x1.5 M14N4-4N M16x1.5 M16N4-4N M18x1.5 M18N4-4N M20x1.5 M20N4-4N M22x1.5 M22N4-6N M10x1.0 flat M101N6-6N M12x1.0 M121N6-6N M12x1.25 M N M12x1.5 M12N6-6N M14x1.5 M14N6-6N M16x1.5 M16N6-6N M18x1.5 M18N6-6N M20x1.5 M20N6-6N M22x1.5 M22N6-8N M12x1.5 M12N8-8N M14x1.5 M14N8-8N M16x1.5 M16N8-8N M18x1.5 M18N8-8N M20x1.5 M20N8-8N M22x1.5 M22N8-10N M14x1.5 M14N10-10N M16x1.5 M16N10-10N M18x1.5 M18N10-10N M20x1.5 M20N10-10N M22x1.5 M22N10-10N M24x1.5 M24N10-12N M16x1.5 M16N12-12N M18x1.5 M18N12-12N M20x1.5 M20N12-12N M22x1.5 M22N12-12N M24x1.5 M24N12-12N M26x1.5 M26N12-12N M28x1.5 M28N12-12N M30x1.5 M30N12-16N M22x1.5 M22N16-16N M26x1.5 M26N16-16N M30x1.5 M30N16-20N M30x1.5 M30N20 Except where noted fittings have concave (inverted flair) sealing surface. Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
4 -N Male x Metric Male ump Tube daptor Metric Cap Female (LLOY) ack to HOME -N X Metric part # -6N x M14 x N x M16 x N x M18 x ump tube format is used throughout EFI, power steering and transmission cooling, systems. These handy union/adaptors convert to -6N, permitting custom plumbing. Material - steel, o-ring included. Metric Male x Metric Male Union Metric Metric part # M18 x 1.5 M18 x 1.5 M18M18S M18 x 1.5 M20 x 1.5 M18M20S M22 x 1.5 M26 x 1.5 M22M26S M22 x 1.5 M30 x 1.5 M22M30S M26 x 1.5 M26 x 1.5 M26M26S M26 x 1.5 M30 x 1.5 M26M30 M30 x 1.5 M30 x 1.5 M30M30S Part number ending in (S) designates steel material Reducer Female (Metric) x Male (Metric) male female part # M14x1.5 M8x M16x1.5 M12x M18x1.5 1/8" NPT /8 M18x1.5 M14x M20x1.5 M14x M22x1.5 M12x M22x1.5 M14x M22x1.5 M16x M22x1.5 M18x M24x1.5 M14x Reducer Female (NPT) x Male (Metric) male female part # M12x1.5 1/8" NPT /8 M14x1.5 1/8" NPT /8 M18x1.5 1/8" NPT /8 Metric part # 12 x M12 14 x M14 16 x M16 18 x M18 22 x M22 26 x M26 30 x M30 Metric Port Plug Male (LLOY) some s available in countersunk w/allen hex Metric part # M10 x M101 M12 x M121 M12 x M12 M14 x M14 M16 x M16 M18 x M18 M20 x M20 M 22 x M22 M 24 x M24 M 26 x M26 M 30 x M30 also available in steel add (S) to part number Metric Male Weld-on (LLOY) 60 degree DIN Metric part # M14x M14 M16x M16 M18x M18 M22x M22 M26x M26 M30x M30 Flair-less Metric Tube Sleeve & Nut M Tube part # 14x1.5 8mm VFS-14/8 16x1.5 10mm VFS-16/10 18x1.5 12mm VFS-18/12 22x1.5 14mm VFS-22/14 24x1.5 16mm VFS-24/16 Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
5 Metric anjo Fittings Metric anjo to -N Hose Metric anjo to -N Male (aluminim & steel) Metric anjo to Push-on Hose ack to HOME Metric anjo to -N Hose hole hose part # Metric anjo to -N Male (LLOY) hole male part # 12mm -6N J126H 14mm -6N J146H 16mm -6N J166H 18mm -6N J186H 22mm -6N J226H 12mm -8N (2) J128H 14mm -8N (2) J148H 16mm -8N J168H 18mm -8N J188H 16mm -10N (2) J1610H 18mm -10N J1810H 20mm -10N J2010H 24mm -10N J2410H (2) Long banjo bolts are required. Color may vary (black & gold). Socket is "cutter" type which is only suitable for stainless braid racing hose, not lightweight hose. 14mm -3N J143M 12mm -4N J124M 14mm -4N J144M 12mm -6N J126M 14mm -6N J146M 16mm -6N J166M 18mm -6N J186M 12mm -8N (2) J128M 14mm -8N (2) J148M 16mm -8N J168M 18mm -8N J188M 22mm -8N J228M 16mm -10N (2) J1610M 18mm -10N J1810M 20mm -10N J2010M 22mm -10N J2210M (2) Long banjo bolts are required. Color may vary (black) Metric anjo to -N Hose Extended Neck hole hose part # 12mm -6N J126HE 14mm -6N J146HE 12mm -8N J128HE 14mm -8N J148HE 16mm -8N J168HE 18mm -8N J188HE 16mm -10N J1610HE 18mm -10N J1810HE Extended neck, taper socket, swivel banjo hose end. Side profile is slim for standard length bolts. Color: lack Metric anjo to -N Male (STEEL) hole male part # 10mm -3N J103MS 10mm -4N J104MS 12mm -3N J123MS 12mm -4N J124MS 12mm -6N J126MS 14mm -6N J146MS 16mm -6N J166MS - plated steel with gold or sliver finish We assemble custom hoses. Call for quote. Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
6 Metric anjo Fittings Metric anjo to Push-on Hose Metric anjo olt (LLOY) UHL hole hose part # 8mm 1/4" J81/4PO 8mm 3/16" J83/16PO 10mm 1/4" J101/4PO 10mm 5/16" J105/16PO 12mm 1/4" J121/4PO 12mm 5/16" J125/16PO 12mm 3/8" J123/8PO 14mm 1/4" J141/4PO 14mm 5/16 J145/16PO 14mm 3/8" J143/8PO 14mm 1/2" J141/2PO 16mm 5/16" J165/16PO 16mm 3/8" J163/8PO 16mm 1/2" J161/2PO 18mm 3/8" J183/8PO 18mm 1/2" J181/2PO - steel with plated finish - light barb, requires clamp Metric UHL part # M12 x mm JM121 M12 x 1.0 (2) 30mm JM121L M12 x mm JM1212 M12 x mm JM12 M12 x 1.5 (2) 30mm JM12L M14 x mm JM14 M14 x 1.5 (2) 31mm JM14L M16 X mm JM16 M16 x 1.5 (2) 33mm JM16L M18 / M16 x 1.5 (3) JM18/16 M18 x mm JM18 M20 x mm JM20 M22 x mm JM22 Metric anjo to Push-on Hose Metric anjo olts (aluminum & steel) - standard, long and double lengths. UHL (2) Long bolts are required for use with 12mm x -8N, 14mm x -8N and 16mm x -10N banjos. (3) Step bolt with M16 x 1.5 thread for use with M18 banjos. Color may vary (black) Metric anjo olt (STEEL) ack to HOME Metric UHL part # M8 x mm JM8 M10 w/m8 x 1.0 (1) JM10/8 M10 x mm JM101 M10 x 1.0 (2) 24mm JM101L M10 x mm JM1012 M10 x 1.25 (2) 24mm JM1012L M10 x mm JM10 M10 x 1.5 (2) 24mm JM10L M12 x mm JM121S M12 x mm JM12S M12 x 1.5 (2) 28mm JM12SL M14 x mm JM14S M14 x 1.5 (2) 33mm JM14SL M16 x mm JM16S M16 x 1.5 (2) 33mm JM16SL M18 x mm JM18S (1) Step bolt with M8 x 1.0 thread for use with M10 banjos. (2) Long bolts are required for M10-3 and -4 "series 2" profile banjos. lso use with 12mm x -8N, 14mm x -8N and 16mm x -10N banjos. 17mm =.670" 20mm =.790" 24mm =.945" 25mm =.985" 28mm = 1.10" 31mm = 1.25" 33mm = 1.30" 38mm = 1.50" We assemble custom hoses. Call for quote. Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
7 Metric anjo Fittings Metric Double anjos Metric anjo olts (aluminum & steel) - standard, long and double lengths. Metric Double anjo to Push-on Hose hole hose part # 10mm 1/4" J101/4PO-D 12mm 5/16" J125/16PO-D 14mm 3/8" J143/8PO-D 16mm 1/2" J161/2PO-D - steel with plated finish - light barb, requires clamp Metric Double anjo to -N Male hole male part # 10mm* -3N J103MD 12mm -6N J126MD 14mm -6N J146MD luminum with black finish except where noted *steel with plated finish. anjo olt Double (STEEL) Thread Series UHL Part# UHL 1/8" SP " J1/8D 3/8" " J3/8D 3/8" " J3/8DL M10x " JM101D M10x " J1012D M12x1.5* 1.550" JM12SD M14x1.5* 1.650" JM14SD UHL: under head length *M14 and M14 double bolts are suitable with most -3, -4, -6 banjos - not for use with thicker profile -8N or -10N banjos that require long bolts. Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
8 ack to HOME Metric Hose Ends (push-on) Metric Straight Hose Ends (plated steel) Metric Hose i.d. part # M12x1.5 1/4" MS1204 M14x1.5 1/4" MS1404 M16x1.5 3/8" MS1606 M18x1.5 3/8" MS1806 M22x1.5 1/2" MS2208 M26x1.5 5/8" MS2610 M30x1.5 3/4" MS3012 Metric 90 Degree Hose Ends (plated steel) Metric Hose i.d. part # M12x1.5 1/4" M M14x1.5 1/4" M M16x1.5 3/8" M M18x1.5 3/8" M M22x1.5 1/2" M M26x1.5 5/8" M M30x1.5 3/4" M Metric 45 Degree Hose Ends (plated steel) Metric female hose ends. Use with standard Socketless type hose - clamp not required. Metric Hose i.d. part # M12x1.5 1/4" M M16x1.5 3/8" M M18x1.5 3/8" M M22x1.5 1/2" M M26x1.5 5/8" M M30x1.5 3/4" M Metric Male to arb* arb Metric Size part # 5/16" M12 x M12-5/16 3/8" M12 x M12-3/8 1/2" M18 x M18-1/2 3/4" M18 x M18-3/4 Metric Crush Washers part # Use to convert ocsh fuel pumps and filters to push-on hose. Washer included *arb requires clamp. 8mm* 10mm* 12mm* 14mm 16mm 18mm 22mm 26mm 30mm CWM8 CWM10 CWM12 CWM14 CWM16 CWM18 CWM22 CWM26 CWM30 We assemble custom hoses. Call for quote. *Copper (others aluminum) Importer/Distributor- T Inc Matoaka Road. Sarasota, FL 34243
FITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint
Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,
Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options
Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes
FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12
PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
TYPE A Male camlock-female BSPP
Camlock couplings H CAM AND GROOVE BASICS Cam and groove, camlock for short is a connecting system consisting of male socket with a circumferential groove where a couple of eccentrical levers in the female
57 Series Pg Pg Pg Pg Pg Pg Pg Pg Pg. 2.
57000 Pg. 2.5 57010 Pg. 2.5 57110 Pg. 2.5 57210 Pg. 2.5 57222 Pg. 2.6 57020 Pg. 2.6 57010 Pg. 2.6 57030 Pg. 2.6 57105 Pg. 2.7 57115 Pg. 2.7 57125 Pg. 2.7 57215 Pg. 2.8 57225 Pg. 2.8 57100 Pg. 2.8 57200
PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Industrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
Part# IAG-ENG-2070 Tools Required: Ratchet, Torque wrench Sockets: 14mm, 17mm Wrenches: 10mm, 17mm, 9 / 16
IAG Turbo Oil Feed & AVCS Line Part# IAG-ENG-2070 Tools Required: Ratchet, Torque wrench Sockets: 14mm, 17mm Wrenches: 10mm, 17mm, 9 / 16 Thank you for choosing the IAG Turbo Oil Feed and AVCS Line. This
PARTS CATALOG. MOBILE IBC SERVICES, LTD. 30 South 4 th Street Dennison, Ohio
2016 PRTS CTLOG MOILE IC SERVICES, LTD. 30 South 4 th Street Dennison, Ohio 44621 TOTEPRTS Mobile IC Services 3/1/2016 Page 1: Page 2: Page 3: Page 4: Page 5: Page 6: Page 7: Page 8: Page 9: Page 10: Page
Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
COPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/
COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1
Spare parts list ( ) Spare parts list HD 1050 DE
Spare parts list (5.972-503.0) Spare parts list HD 1050 DE 07.05.2013 www.kaercher.com EN Table of contents Spare parts list HD 1050 DE (5.972-503.0)... 6 10 Frame (0.116-553.0)... 7 11 Cover (0.116-551.0)...
Specifications For Threaded and Butt Weld Hammer Unions
.02 Introduction Pacific Hoseflex offers a comprehensive range of standard and sour gas. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. - Three lug
VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
Barbed Fittings. The World Standard. Dubl-Barb Fittings. Hose Barb Fittings. Compact One-piece Economical Reusable Use with Polyethylene Tubing
Barbed Fittings zfc05 ubl-barb Fittings Compact One-piece Economical Reusable Use with Polyethylene Tubing Hose Barb Fittings All Brass Construction Straight and etric Threads Beaded & Standard Hose Barbs
Schroeder Check Test Point System
Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide. Date: April 7, 2017
Rocky Mountain Instinct / Pipeline Alloy Frame Assembly Guide Date: April 7, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts
5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
Externally Convoluted. Internal mirror smooth finish. Collar. Swaged G-line fitting
SECTION:// 00:01 G-LINE HOSE & FITTINGS At the cutting edge of motorsport, a fraction of a second is the difference between winning and just taking part. You need the best. At Goodridge we have combined
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
INSERT FITTINGS INSERT FITTINGS
Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
Technifit. Union Bulkhead Flow Controller. Fractional & Metric. Push-to-Connect Fittings. March 2006
Technifit TM Push-to-Connect Fittings March 2006 Male Female Elbow Tee Union Bulkhead Flow Controller Fractional & Metric PO Box 335 12740 State Route 4 Milford Center, Ohio 43045-0335 USA Phone: 937.349.4055
SECTION 2 RING MOUNT
SECTION 2 RING MOUNT Rotax aircraft engines are manufactured and supported by Rotax GmbH of Austria. Read and understand the Rotax manuals completely before starting with the engine installation, as they
Torque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
High Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
Installation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
Eaton s Aeroquip Performance Products. Performance Under Pressure
Eaton s eroquip Performance Products Performance Under Pressure EXPERIENCE THE DIFFERENCE I N T R O D U C T I O N Over the years our customers have experienced a difference in quality, industry support,
General page Straight unions page Angle unions page Tee and L-unions page Gauge connection unions page 42
C 2610-00 Table of contents General page 3-13 DILO unions for pressure ranges from 100 320 bar Straight unions page 14-25 Weld-on tube unions page 14-16 Screw-in tube unions page 17-25 with metric / Whitworth-
Bolt. enmey Body Assembly. Bolt Sleeve. Bolt Stop. enmey TM PARTS GUIDE Rev 1.3 Page 2. OM7010 Bolt Tail O-rings
parts guide Bolt OM7010 Bolt Tail O-rings XTC309 Bolt Only lubricate with GR33SE TM paintball marker lubricant. enmey Body Assembly OM7017 Rear Breech O-ring OB7017 SFT O-ring Lightly grease O-ring Grease
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC.
SCHRADER TANK VALVES FOR USE IN AIR BLADDER APPLICATIONS, BICYCLE SUSPENSION SYSTEMS, TELECOMMUNICATIONS, WATER STORAGE SYSTEMS, ETC. Demand an authentic Schrader valve built by the company that set the
GT20 String Trimmer UT Page 1 of 16 Accessories
GT20 String Trimmer UT-26037 Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1
4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
KOMPLETNÍ PNEUMATICKÉ ROZVODY
KOMPLETNÍ PNEUMATICKÉ ROZVODY KOPR s.r.o. Kněžmost Sokolská 170 294 02 Kněžmost PRICE LIST BRASS QUICK FITTINGS RAP 7 2009 WE OFFER : - quantity discounts - other parts made to customer specifications
GT21 String Trimmer UT Page 1 of 16 Accessories
GT21 String Trimmer UT-26038 Page 1 of 16 Accessories GT21 String Trimmer UT-26038 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1
Y:\Machine Manuals & Spare Parts Lists\PARTS BREAKDOWN\Commercial CW Gas\HD850WS Page 1
1.0 PIECE PARTS - parts listing 1 5311-0710 Nut 1 2 5443-2820 Hose Stem 1 3 6362-3950 O-Ring Seal 14.0x1.78 1 4 6414-2820 Strainer 1 5 6313-0030 Spring 2 6 5321-1980 Handhold 1 7 5066-2120 Cover 1 8 5363-1350
Continental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
Performance Products
Performance Products INTRODUCTION INTRODUCTION Eaton s eroquip Performance Product brand of hose and fittings continues to prove there is a difference in performance plumbing products. Our long tradition
B-Too Drilling and Tapping Machine
Material Specifications Powered by hand or with Ridgid 690 (TM-29) High strength, modular aluminum and steel components Inserts any 3 /4" to 1" corporation stop under pressure Extracts threaded corporation
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices
Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power
Replacing the Reverse Osmosis ( RO ) Membranes
Replacing the Reverse Osmosis ( RO ) Membranes Changing your membranes is a relatively straightforward procedure that can be achieved by carefully following these instructions. During disassembly, water
Industrial Products Catalog Tank Valves
Industrial Products Catalog Tank Valves Schrader International core competencies include high volume precision machining, assembly and testing of fluid control devices. Since developing the first pneumatic
Water Fittings & Hose
Connector Plugs A d1 d R H Male Type Brass Part R Di H A Number Series BSPT CM251 1/8 9 17 22 25 200 CM252 Series 1/4 9 19 26 29 1/4 Flow CM253 3/8 9 19 30 30 CM351 1/8 13 25 26 35 CM352* 300 1/4 13 25
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO
Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches
Spare parts list ( ) Spare parts list HD 1090 WS *
Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...
Pressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
Hoist Ring Forged Hoist Ring Machined Hoist Ring (Metric) Hoist Ring Swivel Shoulder Eyebolts JD Weld-On Alloy Lifting
Hoist Ring Forged........................... 94 Hoist Ring Machined........................ 95 Hoist Ring (Metric).......................... 96 Hoist Ring Swivel........................... 97 Shoulder
VCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
Prestolok PLM Metal Push-to-Connect Fittings
Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for
CAM & GROOVE COUPLINGS (for Liquid, Bulk and Chemical Transfer)
CAM & GROOVE COUPLINGS (for Liquid, Bulk and Chemical Transfer) CAMPBELL COBRA VS. STANDARD COBRA COBRA is the trade name for our entire line of cam & groove couplings. Campbell COBRA is the upgraded versions
Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
Spare parts list ( ) Spare parts list HDS 700 B
Spare parts list (5.955-875.0) Spare parts list HDS 700 B 02.09.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 700 B (5.955-875.0)... 6 10 Individual parts... 7 11
Standard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
Section 3- Repair and Calibration Procedures
Section 3- Repair and Calibration Procedures 1. Refrigerant Removal Procedures 2. Scale/PC Board Recalibration Procedure 3. PC Board Configuration Procedure of AR400 4. Scale Tare Procedure 5. Gauge Calibration
8.0. Tube and Fitting Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0
Product Catalogue Section J Version 8.0 Tube and Fitting Components Section J Tube & Fitting Components Index Barb Tee J:11 Blank Plug J:4 Branch Tee / Stud Tee Coupling J:10 Bulkend Coupling J:5 Bulkhead
Spare parts list ( ) Spare parts list HDS 990
Spare parts list (5.952-855.0) Spare parts list HDS 990 13.10.2014 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 990 (5.952-855.0)... 6 10 Individual parts... 7 49 Spare
Parts Manual. Scraper Hitches PH:
Parts Manual Scraper Hitches 12-18 1 Table of Contents A123299 Swivel Hitch 3 A1063527 Super Swivel Hitch 4 A125056 Yoke Hitch 5 A125057 Super Capacity Hitch 6 A125223 MDU Hitch 7 A123224 360 Swivel Hitch
MIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
Push-in fittings NPQH
Key features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard
Sample C ylinde rs, Acce ssorie s, and O utage Tube s
www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample
DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
Rocky Mountain Instinct / Pipeline Frame Assembly Guide. Date: March 31, 2017
Rocky Mountain Instinct / Pipeline Frame Assembly Guide Date: March 31, 2017 1 Table of Contents Front Triangle Preparation... 4 Parts Needed... 4 Instructions... 4 Chain Stay Preparation... 6 Parts Needed...
PLUMBING WATER & GAS TRADE CATALOGUE
PLUMBING WATER & GAS TRADE CATALOGUE 2015 Index Plumbing, Water & Gas Hoses & Fillers P-04 Tanks Containers Accessories P-07 PumpsP-11 Water is our most precious resource and a necessity when camping and
One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.
One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread
RegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
O-Rings and Seals - Order Today, SHIP TODAY at O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal Metric O-Ring ORFS O-Ring N4 Metric Retaining Ring XO O-Ring O-Ring N4 Port Ends SAE, Metric,, JIS, K4 Retaining Ring SAE O-Ring N4 EOlastic Seal Ring ISO 6149 O-Ring
SIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
New, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
COMPACT NITROGEN DIE SYSTEMS
COMPACT NITROGEN DIE SYSTEMS CONTENTSENTS 3 2 Compact Die Systems Fundamentals 3 Spring rates and scales 45 Standard cylinders Type CDS (3.3 100 kn) 6 Pad mounted cylinders Type CDSP (3.3 200 kn) 7 Low
screw fittings - nickel plated brass series SC
screw fittings - nickel plated brass series SC SC SCC SC SC SC SC SC SCC SC SC SC SCC SC SC SC2C SC2 SC2 SC SC3 SC3 SC0 SC design screw fitting with swivel nut connection 1/"...1/2" optionally cylindrical
Push-in fittings CRQS, stainless steel
Features Application Effortless selection of the right fitting. Festo offers a secure solution for every connection. The convenient push-in fitting system includes well over 1000 types of standard and
TOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
Push-Lok 801/804/821/836 Hose and Fittings
Push-Lok 801/804/821/836 Hose and Fittings Parker Push-Lok The Most Complete Line of Premium-Quality, Low-Pressure Hose and Fittings Push-Lok Plus 801 hose provides the quick and easy assembly/ disassembly
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS
BASIN AND WALL MIXER INSTALLATION INSTRUCTIONS IMPORTANT INFORMATION IMPORTANT All tapware and showers to be installed by a licensed plumber and to Australian Standards. Fit tempering and pressure reduction
Quick Release Couplings 233 Series
Quick Release ouplings 233 Series 4mm - 9mm I/ hose 1 8" - 1 4" SP thread Low pressure drop across coupling High flow rate ompact construction One hand operation Robust construction Various connection
Reservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
SATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
Automatic Twin Greasing System
Parts Manual Automatic Twin Greasing System YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm or
Spare parts list ( ) Spare parts list HD 4.0/36 P
Spare parts list (5.970-479.0) Spare parts list HD 4.0/36 P 13.04.2015 www.kaercher.com EN Table of contents Spare parts list HD 4.0/36 P (5.970-479.0)... 6 10 Frame... 7 20 Pump set... 9 21 Cylinder head...
Pneumatic Function Fittings Metric & Inch
Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches
prevo.g COMPRESSED AIR QUICK COUPLING offers the following advantages: Light Heavy duty User friendly Compatible with mm profile couplings.
prevo.g COMPRESSED AIR QUICK COUPLING Prevo.G compressed air quick coupling offers the following advantages: Light Heavy duty User friendly Compatible with 7.2-7.4 mm profile couplings. Due to its material
The Enerpac Lightweight Aluminum Cylinders
The nerpac Lightweight luminum s Shown: RC, RCL, RC, and RR R : 20-150 tons - inches Lightweight, easy to carry and position to allow a higher cylinder capacity-to-weight-ratio Non-corrosive by design,
Flexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
NHR Powder Feed Hopper
Instruction Sheet P/N 0804A0 NHR-8-50 Powder Feed Hopper Description This instruction sheet provides specifications, installation and operation instructions, and parts lists for the NHR-8-50 powder feed