bivi * table * table with back pocket * electrical Ins tallation Ins tructions

Transcription

1 bivi * table * table with back pocket * electrical Ins tallation Ins tructions 2011 S teelcas e Inc. G rand R apids, MI U.S.A. P rinted in U.S.A. P age 1 of 20

2 Tools Needed Here's what's in the boxes (included) Assembly Video myturnstone.com/bivi/instructions Time Needed Assembly time: 20 Minutes leg table top Difficulty Scale really easy a little more difficult electrical trough table top with back pocket P age 2 of 20

3 For assembly video, go to myturnstone.com/bivi/instructions right and left brackets pocket cover trough end caps back pocket thumb screws P age 3 of 20

4 1 Assemble leg. P ull off covers (a). Install leg onto supports with four cap screws. S crews must be securely tightened with no gaps between the parts. R ecommend tightening screws to in-lbs (b). Install opposite leg same as previous step (c ). S nap on covers (d). (c) (a) (d) (a) (d) (b) ALIG N R OUND TOP LAB E LS. tip Use packaging foam for assembly fixture. P age 4 of 20

5 2 Stage trough. S et the trough between the two legs on a clean surface. P age 5 of 20

6 3 Attach leg to trough. tips R est one side of the trough on the floor and place lip on the other side into the bottom edge of the leg. (a) lip S tand one leg up. Lift and place end of electrical trough up to the leg. Drop the lip of the trough into the slot on the leg (a). Make sure the connection bracket is fully engaged with the top leg slot (b). Tighten with hex wrench (c ). (b) View from underneath. (c) P age 6 of 20

7 4 Install second leg. NOTE: Single or Individual Table only. Spacers are shipped in box with the table top. Place a Spacer here before assembling the trough. R emember what you did a few minutes ago? Do that again. NOT E : If you just want an individual table, place trough to far end. P roceed with following steps. P age 7 of 20

8 5 Attaching second unit. Additional units share leg at either end of the first unit. R epeat steps 3 and 4. P age 8 of 20

9 6 Attach worksurface brackets. (a) (b) Attach the brackets into the slot in the leg top and rotate (a). P ush the bracket back toward the electrical trough to complete the attachment (b). P age 9 of 20

10 7 Add electrical. tips F or more in depth resources of the electrical, visit myturnstone.com electrical section or see assembly instructions sent in electrical box. Insert the cord of power strip #1 into the power cutout in the trough that is closest to the power outlet. C ontinue to insert power strips #2, #3 & #4. T he cords from each power strip should be hanging to the floor. P age 10 of 20

11 8 Install knobs. View from underneath trough. Install the knobs, two per power strip, inside the trough and onto the bottom of the power strip at each end. P age 11 of 20

12 9 Feed cords into trough. View from underneath trough. F eed the hanging cords into the underside of the trough. P age 12 of 20

13 10 Connect the power strips. C onnect power strip #1 to power strip #2 (R ed to R ed). C onnect power strip #2 to power strip #3 (Orange to Orange). C onnect power strip #3 to power strip #4 (G reen to G reen). P lug the outlet on P ower S trip #1 into the wall. P age 13 of 20

14 11a table top Attach the table tops. Add the table top. P ut the back of the top into the opening along the back of the electrical trough. S wing the front down onto the top brackets (back of top has the cutout). S ecure the front of the top to the worksurface brackets by hand tightening the thumb s c rews to the bottom of the top. Use thumb screw. View from underneath. NO DR IV E R P age 14 of 20

15 11b Add the back pockets. s plit table top with back pocket (a) (b) Add the back pockets. P ut the back of the back pocket into the opening along the back of the trough (a) and swing down (b). P age 15 of 20

16 11c table top with back pocket Attach tops. Add the table top with back pocket. Make sure the two tabs, on the underside of each top, go under the tray and brackets (a). S ecure the front of the tops to the brackets by hand tightening the thumb s c rews to the bottom of the tops (b). (b) tab (a) NO DR IV E R View from underneath. P age 16 of 20

17 12 trough caps Add the trough caps. P lace in the trough caps, one on each end. P age 17 of 20

18 13 pocket covers Attach pocket covers. P lace the pocket covers on top of the tray. P ut the back of the cover into the opening along the length of the trough. Two covers to each side. P age 18 of 20

19 Visit myturnstone.com to see more spots. P age 19 of 20

20 F or more information and assembly instruction videos visit myturns tone.c om/bivi/ins truc tions All rights reserved S teelcase Inc. P rinted in the U.S.A. on recycled paper. Data subject to change. Trademarks used herein are the property of S teelcase Inc. S ome products and services may not be available in all countries. Your Turnstone representative can provide you with details. F or more information, call Turnstone C ustomer S ervice at or visit us online at myturnstone.com. ad-stock ID bivi table, bivi table with back pocket, includes electrical: 5/11 P age 20 of 20