Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
|
|
|
- Anis McDonald
- 5 years ago
- Views:
Transcription
1 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona free performacnce. These capacitors are ideal in high frequency, high pulse current applications and offer excellent stability, virtually linear temperature coefficient. Specifications Highlights - Very low dissipation factor - High dv/dt rating Capacitance Range 470 pf to.015 µf Capacitance Tolerance ±1% to ±10% Rated Voltage 800/900 Vac (1800/2000 Vdc) Operating Temperature Range 55 ºC to 85 ºC +105 ºC with proper voltage derating Lead Wire Corona Start Voltage (typical) Dielectric Tinned copper clad steel,.032 (0.8) diameter, #20 AWG 800 Vac units: V RMS 900 Vac units: V RMS Polypropylene film; utilizing a floating common of metallized polypropylene, which provides self-healing characteristics Construction Non-inductively wound with extended foil, internal series section design Encapsulations Conformal coating of flame retardant orange epoxy (meets UL94V-0) Insulation Resistance 400,000 MΩ minumum at +25 ºC 20,000 MΩ minumum at +85 ºC 2,000 MΩ minumum at +105 ºC RoHS Compliant Part Numbering System Dimensions in inches, metric (mm) in parenthesis. 715P/717P L B 3 (XXXX) Capacitance AC Voltage Case Lead Series Capacitance Tolerance Rating Code Terminal Length Suffix 715P Round Profile 222 = 2200 pf 9 = ±10% A = Straight Lead 1 = (4.7) ±0.030 (0.8) May be added 717P Pressed Profile 5 = ±5% B = Hairpin Crimp 2 = (6.4) ±0.030 (0.8) by factory to 3 = ±3% C = Captive Crimp * 3 = (32) Minimum denote special 2 = ±2% D = Hockey Stick Crimp (Custom lead lengths available) construction 1 = ±1% *Terminal C has a lead length of (4.0) ±0.020 (0.5) therefore it is not necessary to indicate the lead length digit. The Captive Crimp is designed for circuit boards with hole sizes of.044 (1.1) to.048 (1.2) in diameter. 1
2 Type 715P/717P, Orange Drop,High Voltage, Polypropylene Film/Foil Ratings Cap. Catalog Seated Max dv/dt Max % (µf) Part Number L Max Dia Max H Max Height (Volts/µsec) 20 KHz 100 KHz Type 715P, 800 Vac Standard Sizes/Ratings P L (28.5).29 (7.4).35 (8.9).60 (15.3) P L (28.5).30 (7.6).36 (9.2).61 (15.5) P L (28.5).32 (8.1).37 (9.4).62 (15.8) P L (28.5).28 (7.1).33 (8.4).58 (14.7) P L (28.5).28 (7.1).33 (8.4).58 (14.7) P L (28.5).29 (7.4).35 (8.9).60 (15.3) P L (28.5).31 (7.9).36 (9.2).61 (15.5) P L (28.5).32 (8.1).38 (9.7).63 (16.0) P L (28.5).34 (8.6).40 (10.2).65 (16.5) P L (28.5).36 (9.2).42 (10.7).67 (17.0) P L (28.5).38 (9.7).44 (11.2).69 (17.5) P L (28.5).41 (10.4).46 (11.7).71 (18.0) P L (28.5).43 (10.9).49 (12.5).74 (18.8) P L (28.5).46 (11.7).52 (13.2).77 (19.6) P L (28.5).49 (12.5).55 (14.0).80 (20.3) P L (28.5).53 (13.5).58 (14.7).83 (21.2) P L (28.5).57 (14.5).63 (16.0).88 (22.4) P L (28.5).61 (15.5).67 (17.0).92 (23.4) P L (28.5).67 (17.0).72 (18.3).97 (24.6) Type 717P, 800 Vac Standard Sizes/Ratings P L (28.5).21 (5.4).39 (9.9).64 (16.3) P L (28.5).22 (5.6).40 (10.2).65 (16.5) P L (28.5) 24 (6.1).42 (10.7).67 (17.0) P L (28.5).20 (5.1).38 (9.7).63 (16.0) P L (28.5).20 (5.1).38 (9.7).63 (16.0) P L (28.5).21 (5.4).39 (9.9).64 (16.3) P L (28.5).31 (7.9).41 (10.4).66 (16.8) P L (28.5).23 (5.9).42 (10.7).67 (17.0) P L (28.5) 24 (6.1).45 (11.4).70 (17.8) P L (28.5).25 (6.4).47 (11.9).72 (18.3) P L (28.5).27 (6.9).50 (12.7).75 (19.1) P L (28.5).29 (7.4).55 (14.0).80 (20.3) P L (28.5).29 (7.4).57 (14.5).82 (20.8) P L (28.5).32 (8.1).60 (15.3).85 (21.6) P L (28.5).34 (8.6).63 (16.0).88 (22.4) P L (28.5).38 (9.7).69 (17.5).94 (23.9) P L (28.5).43 (10.9).73 (18.5).98 (24.9) P L (28.5).44 (11.2).79 (20.1) 1.04 (26.4) P L (28.5).50 (12.7).85 (21.6) 1.10 (27.9)
3 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil 800 Vac Performance Characteristics Tan δ Typical Dissipation Factor vs. 85 C Frequency-Khz
4 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil 800 Vac Performance Characteristics RMS Voltage vs. +85 ºC 4
5 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil Standard Lead Styles/Lead Spacing 800 Vac (22.5) Standard Marking Format Sample Marking on unit Description Standard Lead Styles/Lead Spacing 900 Vac Tolerance codes per EIA standards CDE CDE Electronics identification F ±1% CDE715P800VAC 715P Type number G ±2% 222J VAC AC Voltage rating, Volts H ±3% 222J Capacitance and tolerance code J ±5% 9810 Weekly date code (i.e. 10th wk of 1998) K ±10% Standard Marking Format Sample Marking on unit Description Tolerance codes per EIA standards CDE CDE Electronics identification F ±1% CDE715P900VAC 715P Type number G ±2% 222J VAC AC Voltage rating, Volts H ±3% 222J Capacitance and tolerance code J ±5% 9810 Weekly date code (i.e. 10th wk of 1998) K ±10% 5
6 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil Ratings Cap. Catalog Seated Max dv/dt Max % (µf) Part Number L Max Dia Max H Max Height (Volts/µsec) 20 KHz 100 KHz Type 715P, 900 Vac Standard Sizes/Ratings P L 1.25 (31.8).27 (6.9).33 (8.4).58 (14.8) P L 1.25 (31.8).28 (7.1).34 (8.7).59 (15.0) P L 1.25 (31.8).29 (7.4).35 (8.9).60 (15.3) P L 1.25 (31.8).31 (7.9).36 (9.2).61 (15.5) P L 1.25 (31.8).31 (7.9).37 (9.4).62 (15.8) P L 1.25 (31.8).33 (8.4).38 (9.7).63 (16.0) P L 1.25 (31.8).35 (8.9).40 (10.2).65 (16.5) P L 1.25 (31.8).37 (9.4).42 (10.7).67 (17.0) P L 1.25 (31.8).39 (9.9).45 (11.4).69 (17.5) P L 1.25 (31.8).42 (10.7).47 (11.9).70 (17.8) P L 1.25 (31.8).45 (11.4).50 (12.7).72 (18.3) P L 1.25 (31.8).47 (11.9).53 (13.5).75 (19.1) P L 1.25 (31.8).51 (13.0).56 (14.2).81 (20.6) P L 1.25 (31.8).54 (13.7).60 (15.3).85 (21.6) P L 1.25 (31.8).58 (14.7).64 (16.3).89 (22.6) P L 1.25 (31.8).63 (16.0).69 (17.5).93 (23.6) P L 1.25 (31.8).68 (17.3).73 (18.5).98 (24.9) Type 717P, 900 Vac Standard Sizes/Ratings P L 1.25 (31.8).20 (5.1).37 (9.4).62 (15.8) P L 1.25 (31.8).21 (5.4).38 (9.7).63 (16.0) P L 1.25 (31.8).23 (5.9).39 (9.9).64 (16.3) P L 1.25 (31.8).23 (5.9).40 (10.2).65 (16.5) P L 1.25 (31.8).23 (5.9).43 (10.9).68 (17.3) P L 1.25 (31.8).25 (6.4).44 (11.2).69 (17.5) P L 1.25 (31.8).27 (6.9).47 (11.9).72 (18.3) P L 1.25 (31.8).27 (6.9).52 (13.2).77 (19.6) P L 1.25 (31.8).30 (7.6).54 (13.7).79 (20.1) P L 1.25 (31.8).32 (7.6).57 (14.5).82 (20.8) P L 1.25 (31.8).33 (8.4).63 (16.0).88 (22.4) P L 1.25 (31.8).36 (9.2).66 (16.8).91 (23.1) P L 1.25 (31.8).39 (9.9).69 (17.5).94 (23.9) P L 1.25 (31.8).43 (10.9).73 (18.5).98 (24.9) P L 1.25 (31.8).47 (11.9).78 (19.8) 1.03 (26.2) P L 1.25 (31.8).49 (12.5).85 (23.1) 1.10 (27.9) P L 1.25 (31.8).54 (13.7).91 (23.1) 1.16 (29.5)
7 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil 900 Vac Performance Characteristics Tan δ Typical Dissipation Factor vs. 85 C Frequency-Khz
8 Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil 900 Vac Performance Characteristics RMS Voltage vs. 85 ºC 8
Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona free performacnce. These capacitors are ideal in high frequency, high
Type 761M. Axial Lead Pressed/Oval Profile. Metallized Polypropylene Film Capacitors. Type 761M. Specifications
Axial Lead Pressed/Oval Profile Metallized Polypropylene Film Capacitors Specifications Capacitance Range: 0.012 to 65.0 µf Capacitance Tolerance: ±5% and ±10%, standard (tolerances as close as ±3% available)
Type 160 Metallized Polyester Radial Lead Capacitors
Specifications Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric
MWR - MWF Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low power switching applications. Low pulse operation
JSP. MKT Series J S P -
Loose Taped Fig.1 Fig. 2 JSP Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) Ød ±0.05 All dimensions are in mm.
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
CONTENTS TABLE OF MAIDA S HISTORY TERMINOLOGY & GENERAL SPECIFICATIONS. iii. LEAD CODES and TAPE & REEL STANDARD SERIES 1 HC SERIES 17
TABLE OF CONTENTS MAIDA S HISTORY TERMINOLOGY & GENERAL LEAD CODES and TAPE & REEL i ii iii STANDARD SERIES 1 HC SERIES 17 LOW PROFILE SERIES 33 THERMALLY PROTECTED SERIES 39 HIGH ENERGY SERIES LEAD CODES
Tolerance code. Lead space
FEATURES Non-inductive construction. Self-healing. Flame-retardant plastic case and epoxy resin (compliance with UL 94V-0). High moisture-resistance. Good solderability (plated with 100% Matte Sn). APPLICATIONS
R60. MKT Series R 6 0 -
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 Product code system The
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
Ceramic Disc Capacitors Safety Standard Approved Disc Capacitor
EATURES omplying with EN 132 400 and IE 60384-14, 2nd edition, including amendment 1.1995 High reliability Vertical (inline) kinked or straight leads. APPLIATIONS Across-the-line Line by-pass Antenna coupling.
R / WOUND technology from pitch 10 to 27.5mm (Rated Voltage from 63 to 1000Vdc) PRODUCT CODE SYSTEM
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 PRODUCT CODE SYSTEM p =
Medium Power Film Capacitors
GENERAL DESCRIPTION Metallized polypropylene dielectric capacitor with controlled self-healing. Reinforced metallization developed for high impulse currents. APPLICATIONS IGBT protection IGBT clamping
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F03 Product Name Product Type Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) [CBB61-S3(P2)] Product Code
Series AM3T-VZ 3 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM3T-VZ FEATURES: Wide 2:1 Range 24 Pin DIP Package High up to 82% Metal Package Operating Temperature -4 o C to +85 o C / Isolation 15 or 35
MULTILAYER CERAMIC CHIP CAPACITORS
CGA Series Automotive Grade General (Up to 50V) Type: CGA1 [EIA CC0201] CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] CGA8 [EIA CC1812] CGA9 [EIA CC2220] Issue
Metallized polypropylene film interference suppression capacitor. GB/T , 275/305VAC,0.0010μF 10.0μF Certificate No.
Metallized polypropylene film interference suppression capacitor (Class X2, 275Vac/305Vac) Outline Drawing Note: There are two kind of the insulated lead wire: 1. Insulated rigid leads; 2. Insulated flexible
MULTILAYER CERAMIC CHIP CAPACITORS
CGA Series Automotive Grade Conductive Epoxy Application Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: Jan 2014 REMINDERS Please read before
TURQUOISE SWITCHES ABJ (BJ) SWITCHES
Ultra-miniature Size Sealed Switches TURQUOISE SWITCHES ABJ (BJ) SWITCHES Terminal type Mounting hole 2.3 mm type FEATURES Ultra-miniature size, High sealing performance sealed switches Elastomer double
Medium Power Film Capacitors
The FB series uses a non-impregnated metallized polypropylene dielectric specially treated to have a very high dielectric strength in operating conditions up to 100 C. The FB has been designed for printed
Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors
FEATURES NEW X, Y, "Z", "U" & "V" TYPE HIGH RIPPLE CURRENT/VERY LOW ESR REPLACES MULTIPLE TANTALUM CHIPS IN HIGH CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS FITS EIA (7343) D AND E TANTALUM CHIP LAND
RoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator
Applications / Markets HVAC Electrical Housewares Floor Care Appliances Specifications White Goods Vending Machines Features & Benefits Medical Equipment RoHS Contact Rating: 0.5A @ 42VDC 1A @ 24VDC 2A
SMARTen STP Patch Cords Features
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with two eight-position RJ-45 plugs at each
E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Thin-Film Technology. Accu-F / Accu-P Thin-Film RF/Microwave Capacitors.
Thin-Film Technology Accu-F / Accu-P Thin-Film RF/Microwave Capacitors 5 Accu-F / Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
RESISTORS, HEATERS, FLEXIBLE, SINGLE AND DOUBLE LAYER. ESCC Detail Specification No. 4009/002
Page 1 of 16 RESISTORS, HEATERS, FLEXIBLE, SINGLE AND DOUBLE LAYER ESCC Detail Specification Issue 8 February 2018 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Type MMV Medium Power Cable
7-05 Type MMV Medium Power Cable Single Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Multi-Conductor: 5kV 5kV, 00% & % Insulation Levels. Rated 90 C Conductors Soft annealed flexible stranded
(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
Wet Tantalum Capacitors Tantalum Case with Glass-to-Tantalum Hermetic Seal CECC Approved
Wet Tantalum Capacitors Tantalum Case with Glass-to-Tantalum Hermetic Seal CECC 30202 Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to (to with voltage derating) Capacitance Tolerance:
*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
Outer contact 1.0 milliohm max.
MCX.4 11/27/01 5:17 PM Page 17 Connex MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance structure which operates
CGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: October 2010 TDK MLCC US Catalog Version A10 REMINDERS
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
15KPA-HRA Series. TVS Diodes Axial Leaded 15 kw > 15KPA-HRA series. Descritions
5KPA-HRA Series RoHS Pb e3 Descritions Uni-directional The 5KPA-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
TVS Diodes Axial Leaded 30 kw > 30KPA-HRA series. Features. 30 kw 8.0 W 400 A. -55 to 175 C. Notes: 8.0 C/W
3KPA-HRA Series RoHS Pb e3 Descriptions AGENCY Uni-directional Agency Approvals Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
5KP-HR Series. TVS Diodes Axial Leaded 5 kw > 5KP-HR series. Description. Uni-directional
5KP-HR Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E2353 Bi-directional Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol
SMPS Stacked MLC Capacitors
(SM Style) Technical Information on SMPS apacitors LTRIAL SPIFIATIONS Temperature oefficient 0G: A Temperature oefficient - 0 ±30 ppm/, -55 to +125 X7R: Temperature oefficient - ±15%, -55 to +125 Z5U:
Expert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
UHF/Mini-UHF Coaxial Connectors
UHF/MiniUHF Coaxial Connectors The Amphenol UHF/MINIUHF connectors are popular and economical, used when impedance mating is not required. General purpose units are designed to operate satisfactorily op
E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
Screw Terminal Block Cables
9 Screw Terminal Block s Pre-terminated s Simplify of Terminal Blocks to PLC Modules 1 Reduce setup time with cables pre-terminated for the exact PLC module in use 1 No need to make custom connectors 1
NO: REL-149 PRODUCT: G8P Series PCB Power Relay DATE: November 2014 TYPE: Discontinuation Notice
NO: REL-149 PRODUCT: PCB Power Relay DATE: November 2014 TYPE: Discontinuation Notice G8P PCB Power Relays to be DISCONTINUED April 30, 2015 Due to a diminishing global demand for the G8P series PCB Power
Surface Mount NTC Thermistors. Link: RT Tables. NST Series
FEATURES NEGATIVE TEMPERATURE COEFFICIENT FAST RESPONSE TO TEMPERATURE VARIATIONS MAKE THEM IDEALLY FOR TEMPERATURE SENSORS AND COMPENSATORS RoHS STANDARD EIA 0201, 0402, 0603 AND 0805 SIZES Compliant
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
GENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
MULTILAYER CERAMIC CHIP CAPACITORS
April 2016 CGJ Series High Reliability Grade Mid Voltage (100 to 630V) Type: CGJ3 [EIA CC0603] CGJ4 [EIA CC0805] CGJ5 [EIA CC1206] CGJ6 [EIA CC1210] (1/1) REMINDERS Please read before using this product
Prewired position switches FA series
Prewired position switches Technical data Housing Made of metal, coated with baked epoxy powder 2 m wired cable with 5x0,5 mm 2 wires marked SEV and IMQ Protection degree: IP6 General data Ambient temperature:
EPIC Rectangular Connector Inserts. HBE Series. Technical Data Number of Contacts:
HBE Series HBE series inserts provide reliable termination and performance in the vast majority of medium power and control applications. Methods of termination include screw, crimp, and spring cage clamp.
TECHNICAL BULLETIN PINPOINT CONDUIT COUPLING AND SPLICING RECOMMENDATIONS
TECHNICAL BULLETIN PINPOINT CONDUIT COUPLING AND SPLICING RECOMMENDATIONS CONTENTS: 1.0 General Information 2.0 Preparation and Splicing of PinPoint Wire 3.0 PinPoint Direct Bury Splice Kit Specifications
AMS 2710 PCB pressure sensor module with V output
FEATURES Universal pressure sensor module with 0.. 10 V voltage output Fully calibrated and temperature compensated sensor module Variants for (bidirectional) differential, gage, absolute and barometric
Socket P2RF-05-S P2RF-08-S Clip & Release Lever Nameplate R99-11
Screwless Clamp Terminal Socket P2RF@@S Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double
These products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have
analytical bulk flow distance FLOW level pressure temperature industrial communication
analytical bulk flow distance level pressure temperature industrial communication isolv THERMAL MASS METER Measuring Principle Self-heated Sensor Reference Sensor isolv Thermal Mass Flow Meters have two
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
Electronic Instrumentation
Shielded multipair and multitriad - 00V - 105 C - PLTC - UL 1 Applications Electronic instrumentation, analog and digital signal circuits (-ma). Intrinsically safe circuits. Gas and/or fluid leak detection
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
PolySwitch Radial-leaded Resettable Devices
PolySwitch Radial-leaded Resettable Devices Radial-leaded Raychem Circuit Protection has pioneered PPTC technology for over twenty years. Our radialleaded products represent the widest range of product
SAPCON. User Manual. Capacitance Continuous Level Indicator. . Introduction. . General Description. . Principle of Operation. .
User Manual Capacitance Continuous Level Indicator Comprehensive User s Manual. Introduction. General Description. Principle of Operation. Specifications. Connection Diagrams. Quick Calibration Chart.
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire HIT AIT AIT- HCM SHC HCH MIO CPT BMD RAD CIT GIT0P GITP HIC SNA NAC- SQS SQM SQH SQS Developed in pursuit of miniaturization and low profile as PC board connector for automobile.
MULTILAYER CERAMIC CHIP CAPACITORS. C Series Commercial Grade High Temperature Application
C Series Commercial Grade High Temperature Application Type: C1005 [EIA CC0402] C1608 [EIA CC0603] C [EIA CC0805] C [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] Issue date: July 2013 REMINDERS Please
Aluminum Capacitors +85 C, Miniature, Axial Lead
Aluminum Capacitors +85 C, Miniature, Axial Lead FEATURES High CV per case size Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION
Equipment Accuracy / Selection
Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose
Product Technical Bulletin #48
AN INTEGRATED SOLUTIONS PROVIDER Product Technical Bulletin #48 Current-Carrying Capacity of R-Series Connectors AirBorn Proprietary Page 1 AN INTEGRATED SOLUTIONS PROVIDER R-Series Current-Carrying Capacity
4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.
qwer Air and Inert Gas Valves Brass, or Stainless Steel Bodies 1/" to 1" NPT Features Designed solely for installation in intrinsically safe areas, with properly approved and sized current and voltage-limiting
EPIC Rectangular Connectors HBE Series
HBE Series The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety of ways: screw, crimp, or spring cage clamp. TECHNICAL DATA Number
Features hermetic shielded case very small phase variation
Plug-In Limiter 50Ω Broadband, 0.1 to 150 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Input Power 100mW Control Current 10mA Permanent damage may occur
XSL-360-5E. UV LED 5 mm TECHNICAL DATA. Absolute Maximum Ratings (T a =25 C) Specifications (If=20mA, T a =25 C) Drawing
XSL-360-5E TECHNICAL DATA UV LED 5 mm Drawing Absolute Maximum Ratings (T a =25 C) Item Symbol Value Unit DC Forward Current I F 25 ma Peak Pulse Forward Current * 1 I FP 100 ma Power Dissipation P D 100
Deep Submersible Level Transducer Series 300DS
KPSI Transducers Deep Submersible Level Transducer Series 300DS FEATURES! Custom Level Ranges up to 4614 ft (1408 m) H 2 O! Accuracy of ±0.5% FS! Analog Outputs of 4-20 ma or 0-5 VDC! Welded 316 SS Construction!
Film Capacitors Power Factor Correction
Series/Type: Ordering code: Date: November 2009 Version: 2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the
PRODUCT SPECIFICATION. SFP+ Cage and Cage Assembly 1 of 8 A
SFP+ Cage and Cage Assembly 1 of 8 A 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the _Small Form-factor Pluggage (SFP+) product. 2.0 Scope This
OEM Manual MODEL 2305 ECONOMICAL DIGITAL SINGLE CYLINDER SCALE
OEM Manual MODEL 2305 ECONOMICAL DIGITAL SINGLE CYLINDER SCALE 1 These instructions generally describe the installation, operation, and maintenance of subject equipment. The manufacturer reserves the right
Technical Explanation
Technical Explanation for ESI Pressure Sensors Technical Explanation What is a pressure transmitter? A pressure transmitter (also called pressure transducer or pressure converter) is a component used to
Medium voltage standard-duty, heavyduty, and extreme-duty single-phase, unfused capacitor units and accessories
Power Capacitors Catalog Data CA230003EN Supersedes January 2017 COOPER POWER SERIES Medium voltage standard-duty, heavyduty, and extreme-duty single-phase, unfused capacitor units and accessories General
AMS 6915 Board mount pressure sensor with digital output (I²C)
Board mount pressure sensor with digital output (I²C) FEATURES Calibrated and temperature compensated pressure sensor with digital output (I²C) Differential, relative (gage), bidirectional differential,
P9000 DESCRIPTION. For parts requiring RoHS compliance, please contact factory. P February /6
P9000 High accuracy through digital compensation High thermal stability Rugged stainless steel construction Ideal for test stands High burst pressure limit DESCRIPTION The P9000 Series is a range of advanced,
Simple Set. Pressure Independent Control Valves 2 Way 1/2-2
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control
ESE SERIES. Series Overview. Specifications
Series Overview + Compact Capsule Design + Fully Compliant With IEEE 802.3 Formats + 100Base-T / 1000Base-T Ethernet Cable + T568B Wiring Terminated With RJ45 Connectors + High Quality Gold on Gold Contacts
About ABB Micafil Facts
About ABB Micafil Facts Location Zurich Employees ~ 200 Switzerland Revenues 2008 85 MUSD Production area 11 000 m 2 Export > 80%. About ABB Micafil History 1918 1939 1946 1960 1970 1972 1993 1996 1998
Variable Area Flow Meters
PDF Published May, 04 Variable Area Flow Meters Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow
AIT- CONNECTOR. Board-to-wire/Wire-to-wire terminal. Features. Specifications
AIT- CONNECTOR.4 terminal Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 3% Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of
May08 Rev B
Qualification Test Report 0.64 mm Generation Y Terminal 501-657 20May08 Rev B 1. INTRODUCTION 1.1. Purpose Testing was performed on the Tyco Electronics 0.64 mm Generation Y Terminal to determine its conformance
Core: Ferrite (except high frequency GLA and GLU series, which are nonmagnetic) Coil: Polyurethane enameled copper wire
Sprague-Goodman ENGINEERING BULLETIN.1 Supercedes SG-800G SURFCOIL SMT INDUCTORS FEATURES Lead free, ROHS Compliant High Q High self-resonant frequency including nonmagnetic models in microwave range Shielded
Pro-Tekt European Cable System. Technical Catalog
European Cable System Technical Catalog High-Performance Cables for Demanding Applications Every cable application is important, and durable, long-lasting equipment requires rugged reliability. Downtime
Baseline Two-Wire Technology
Baseline Two-Wire Technology Baseline s bicoders work with Baseline s biline two-wire technology to create the only true bi-direc onal two-wire devices in the industry. Baseline s bicoders not only receive
DCS Series 1 kw, 1.2 kw, & 3 kw
Established 1981 Advanced Test Equipment Rentals www.atecp.com 800-404-ATEC (2832) DCS Series 1 kw, 1.2 kw, & 3 kw DCS Applications The DCS Family is ideally suited f a wide range of applications requiring
Radial Leaded > RGEF Series. Description. Features. Applications
PolySwitch Resettable PPTs RG Series RoHS escription ittelfuse PolySwitch radial-leaded devices represent the most comprehensive and complete set of PPT products available in the industry today. RG series
Glenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
Digital Flow Switch. Series PFM7
Compatible with rgon (r), Carbon Dioxide (CO) and the Mixed Gas (r+co) Digital Flow witch eries PFM7 Flow adjustment valve Fluid r, CO r + CO RoH -color display ee abnormal values at a glance. llows flow
3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
Primary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications
AIT- CONNECTOR Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over % Height uction as compared to the Standard USCAR Footprints. Variations There are multiple varieties of AIT- Connectors
Level transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
Dynisco SPX Industrial (2280/2281) Series
From lab to production, providing a window into the process Dynisco SPX Industrial (2280/2281) Series Smart General Purpose Pressure Sensors Description The Dynisco SPX228X is an all welded construction
OPERATING AND INSTALLATION INSTRUCTIONS
OPERATING AND INSTALLATION INSTRUCTIONS Conductivity Operated Level Control System Having SIRA Approved Intrinsically Safe Electrode Circuits Conforming to the ATEX Directive 94/9/EC Controller type P7/I.S.
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400
MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile 2.75 GB 2.75 Expert 090311 We reserve the right to continuously improve our products and make
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL
APPLICATIONS ROV & AUV SEISMIC PRODUCTION SYSTEMS DOWNHOLE JUMPER & CABLE SYSTEMS DRILLING CONTROL ROV & AUV PRODUCTS GRE (Glass Reinforced Epoxy) CS-MS 55 & 66 SERIES MINI-CON HUMMER GLOBE-CON ALL-WET