Metallized polypropylene film interference suppression capacitor. GB/T , 275/305VAC,0.0010μF 10.0μF Certificate No.
|
|
|
- Godwin Fitzgerald
- 6 years ago
- Views:
Transcription
1 Metallized polypropylene film interference suppression capacitor (Class X2, 275Vac/305Vac) Outline Drawing Note: There are two kind of the insulated lead wire: 1. Insulated rigid leads; 2. Insulated flexible leads. Lead Wire W±0.4mm, H±0.4mm, T±0.4mm Insulated Lead Wire(P 10mm) Features metallized polypropylene structure Withstanding overvoltage stressing Plastic case (UL94 V-0), Epoxy resin sealing. Widely used in interference suppression circuit Lead Wire Dia Insulated Lead Wire Gauge AWG22 AWG20 AWG18 Safety Approvals CQC ENEC-VDE GB/T , 275/305VAC,0.0010μF 10.0μF Certificate No.: CQC EN :2005, 275/305VAC,0.0010μF 10.0μF Certificate No.: UL-CUL CB TEST CERTIFICATE UL1414 CSA C22.2 No.1, 250 VAC, 0.001μF to 1.0μF Certificate No.: E UL1283 CSA C22.2 No.8, 310 VAC, 0.001μF to 10.0μF Certificate No.: E IEC :2005 X2, 275/305 VAC, 0.001μF~10.0μF, 40/110/56/B Certificate No.: DE /M2, DE Specifications Climatic Category/Passive Flammablility Class 40/110/56/B Operating teperature range -40 ~ +110 Class Class X2 Rated Voltage (U R ) 275/305Vac Capacitance Range Capacitance Tolerance Voltage Proof Insulation Resistance μF~10.0μF ±10%(K), ±20%(M) Between Terminals Between Termianls To Case MΩ, C R 0.33μF 5 000s, C R >0.33μF 2 000Vdc(2s) CR 1.0μF 1 800Vdc(2s) CR>1.0μF 2 110Vac (1min) (20, 100V,1min) Dissipation Factor μF C R 0.47μF (1kHz,20 ) (10kHz,20 ) 0.47μF<C R 1.0μF (1kHz,20 ) (10kHz,20 ) C R >1.0μF (1kHz,20 ) Page 2 of 12
2 Part number system The 18 digits part number is formed as follow: C 4 2 Digit 1 to 3 Series code of film capacitor =MKP62 Digit 4 to 5 A.C. rated voltage P2=275V Q2=305V Digit 6 to 8 Rated capcitance value For example : 103= pf= 0.01μF Digit 9 Capacitance tolerance K=±10%, M=±20% Digit 10 Pitch 3=7.5mm 4=10mm 6=15mm 9=22.5mm B=27.5mm F=37.5mm Digit 11 Internal use Digit 12 to 15 Lead dimensions and packaging code Digit 16 to 18 Internal use Table 1 lead dimensions and packaging code Digit 12 Digit 13 Digit 14 Digit 15 code explanation code explanation code explanation code explanation A ammo-pack F=7.5mm F=10.0mm F=15.0mm 0 straight 1 5 each cap. among two consecutive holes P3=12.7mm, H=18.5mm(For pitch=7.5mm) P3=25.4mm;H=18.5mm (For pitch=10/15mm) (Detail parameter refer to page 15 of catalog) C straight lead C in the figure above code explanation standard lead length (18mm~26mm) lead length 4.5mm 0 Length tolerance ±0.5mm or standard length D E Insulated flexible leads Insulated rigid leads 00 lead length 150mm C0 lead length 30mm 1 Length tolerance ±5mm 1 Length tolerance 0~+5mm Page 3 of 12
3 Dimensions(mm) Reduced sizes 275Vac C (μf) W H T P d Part number C (μf) 275Vac W H T P d Part number P2333-4S**** P2224-9S**** P2393-4S**** P2274-9S**** P2473-4S**** P2334-9S**** P2563-4S**** P2394-9S**** P2683-4S**** M P2474M9S**** P2823-4S**** K P2474K9S**** M P2104M4S**** P2564-9S**** K P2104K4S**** P2604-9S**** P2124-4S**** P2684-9S**** P2154-4S**** P2824-9S**** P2184-4S**** P2105-9S**** M P2224M4S**** P2125-9S**** M P2104M6A**** M P2155M9S**** P2104-6S**** K P2155K9S**** P2124-6S**** P2185-9S**** M P2154M6S**** P2225-9S**** K P2154K6S**** P2824-BS**** P2184-6S**** P2105-BS**** M P2224M6S**** P2125-BS**** K P2224K6S**** P2155-BS**** K P2224K6A**** P2185-BS**** K P2224K6B**** M P2225MBS**** P2274-6S**** K P2225KBS**** M P2334M6S*** P2275-BS**** K P2334K6S**** P2335-BS**** M P2334M6A**** P2395-BS**** M P2334M6B**** M P2475MBS**** K P2334K6A**** K P2475KBS**** P2394-6S**** P2565-BS**** M P2474M6S**** M P2685MBS**** M P2474M6A**** P2185-FS**** K P2474K6S**** P2225-FS**** P2564-6S**** P2275-FS**** P2604-6S**** P2335-FS**** P2684-6S**** P2395-FS**** M P2824M6S**** P2475-FS**** P2565-FS**** P2685-FS**** P2825-FS**** M P2106MFS**** K P2106KFS****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10% 2. **** =lead dimensions and packing mode code (refer to table 1) Page 4 of 12
4 Dimensions(mm) 275Vac/305Vac # 275Vac/305Vac # C (μf) W H T P d Part number C (μf) W H T P d Part number P **** P2103-6A**** P **** P2123-6A**** P **** P2153-6A**** P **** P2183-6A**** P **** P2223-6A**** P **** P2273-6A**** P **** P2333-6A**** P **** P2393-6A**** P **** P2473-6A**** P **** P2563-6A**** P **** P2683-6A**** P **** P2823-6A**** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P **** P ****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10% 2. **** =lead dimensions and packing mode code (refer to table 1) 3. # when the rated voltage is 305VAC,the digit 4~5 is Q2. Page 5 of 12
5 Dimensions(mm) 275Vac/305Vac # 275Vac/305Vac # C (μf) W H T P d Part number C (μf) W H T P d Part number P **** P2474-B0**** P **** P2564-B0**** P **** P2684-B0**** P **** P2824-B0**** P **** P2105-B0**** P **** P2125-B0**** P **** P2155-B0**** P **** P2185-B0**** P **** P2225-B0**** P **** P2275-B0**** P **** P2335-B0**** P **** P2395-B0**** P **** P2475-B0**** P2185-F0**** M P2225-F0**** K P2225-F0**** P2275-F0**** P2335-F0**** P2395-F0**** P2475-F0**** P2565-F0**** P2685-F0**** P2825-F0**** P2106-F0****+++ Note: 1. - =capacitance tolerance code, M=±20%,K=±10% 2. **** =lead dimensions and packing mode code (refer to table 1) 3. # when the rated voltage is 305VAC,the digit 4~5 is Q2. Page 6 of 12
6 Maximum permissible voltage change per unit of time Rated dv/dt(v/us) Voltage (Vac) P=7.5mm P=10mm P=15mm P=22.5mm P=27.5mm P=37.5mm 275/ Note: 1 Rated voltage pulse slope (dv/dt) R at rated voltage. 2 If the working voltage(u) is lower than the rated voltage(u R ),the capacitor can be worked at a higher dv/dt. In this case, the maximum allowed dv/dt is obtain by multiplying the right value with U R /U. Impedance Vs. Frequency TYPICAL GRAPHS Z=f(f) Typical values Page 7 of 12
7 2 Test Method And Performance No. Item Performance Test Method (IEC ) 1 Solderability Good quality of tinning 2 Terminal strength 3 Resistance to solder heat Solvent resistance of the marking Initial measurement Rapid change of temperature Vibration Bump Final measurement climate sequence Initial measurement There shall be no visible damage There shall be no visible damage ΔC/C ±5%(relative to the initial value) The marking shall be legible Capacitance Tgδ There shall be no evidence of deterioration. There shall be no evidence of deterioration. There shall be no evidence of deterioration. There shall be no visible damage ΔC/C ±5%(relative to the initial value) Solder temperature: 245 C ±5 C Immersion time: 2.0s±0.5s Tense: 0.50<d 0.80, 10N 0.80<d 1.25, 20N Bend: 0.50<d 0.80, 5N 0.80<d 1.25, 10N The terminals shall be bent 2 times in each direction Solder temperature:260 C±5 C Immersion time: 10s±1s Solvent: Industrial isopropanol. Solvent temperature:23 C±5 C Dipping time: 5min±0.5min Condition:scrub Scrub material:absorbent cotton Reverting time:no θ A =-40 C, θ B =+110 C Duration: t=30min 5 cycles Amplitude 0.75mm or acceleration 100m/s 2 (whichever is the smaller severity), f: 10Hz to 500Hz.Three directions, 2h foreach direction, total 6h times, Acceleration: 400m/s 2, Pulse duration, 6ms Dry heat +110, 16h Damp heat,cyclic Test Db, Severity: b, the first cycle Cold -40, 2h Damp heat, cyclic other Final measurement There shall be no visible damage, legible marking ΔC/C ±5%(relative to the initial value) Increase of tgδ: C R 1μF: (10kHz) C R >1μF: (1kHz) Dielectric strength : there shall be no permanent breakdown or flashover I.R.: 50% of the rated value Test Db, Severity b, the other cycles, Page 8 of 12
8 No. Item Performance Test Method (IEC ) 7 Damp heat steady state 8 Impulse voltage 9 Endurance There shall be no visible damage, legible marking ΔC/C ±5%(relative to the initial value) Increase of tgδ: C R 1μF: (10kHz) C R >1μF: (1kHz) Dielectric strength : there shall be no permanent breakdown or flashover I.R.: 50% of the rated valueir: 50% of the rated value There are three or more waveforms which indicate that no self-heating breakdown have occurred when it is monitored by the monitor There shall be no visible damage, legible marking ΔC/C ±10%(relative to the initial value) Increase of tgδ: C R 1μF: (10kHz) C R >1μF: (1kHz) Dielectric strength : There shall be no breakdown or flashover I.R. : 50% of the rated value Temperature:40 C ±2 C + Humidity: %RH Duration: 56 days Each individual capacitor shall be subjected to 24 impulses of the same polarity (when any three successive impulses are shown by the monitor to have a wave form indicating that no self-healing breakdown have taken place the impulses can be stopped), the time between impulses shall not be less than 10S, and the peak value of the voltage impulse: 2.5kV(suitable for CR 1μF; When CR>1μF, the capacitor can endure pulse voltage value is 2.5/ CR kv) +110 C, 1.25U R Va.c., 1 000h The voltage shall be subjected to 1000Vrms for 0.1s every one hour during test. 10 Charging and discharging ΔC/C ±10%(relative to the initial value) Increase of tgδ: C R 1μF: (10kHz) C R >1μF: (1kHz) I.R.: 50% of the rated value Times: Duration of charging: 0.5s Duration of discharging: 0.5s Charging voltage: 2U R Vd.c. Charging resistance: 220/C R (Ω) or the current 1.0A (whichever is the minor) Discharging resistance: 2U R R = ( Ω) du CR dt C R : Capacitance (μf) du/dt(v/us) : 100V/μs Page 9 of 12
9 No. Item Performance Test Method (IEC ) 11 Passive flammability 12 Active flammability The flaming time of each capacitor shall not go beyond 10s after it is taken apart from the flame. Drop of each capacitor caused by flame shall not fire the tissue below. The cheese cloth around the capacitor shall not burn with a flame. Ref.item 4.17 Needle flame test The category of flammability: B Expose time: 1 time Capacitor Volume Exposing time 250<V(mm 3 ) s 500<V(mm 3 ) s V(mm 3 )> s The specimens shall be individually wrapped in at least 1,but not more than 2,complete layers of cheesecloth,the cheesecloth shall be untreated pure cotton cloth. Each sample shall be subjected to 20 discharged,the interval between successive discharges shall be 5s. + Ui=2.5kV 7 0 % U R be applied and be maintained for 2 min after the last discharge. 3 Marking P=7.5 or 10.0mm P 15.0mm and C R 1.0μF C R >1.0μF Marking Introduction Sign explain Sign explain Brand ENEC-VDE Approval MKP62 Type CQC Approval 275~ Rated voltage UL,CUL Approval X2 Class 250~/310~ Rated voltage (UL, UCL) 102/224/125K Rated capacitance and tolerance 40/110/56/B Climate category / Passive Flammability Class Page 10 of 12
10 4 Taping specification for box-type capacitor Outline Drawing Fig.1 P= mm Taping Dimensions(mm) Technology index title Code Dimensions P=5.0 P=7.5 P=10.0 P=15.0 Tolerance Taping type Fig 1 Fig 1 Fig2 Fig 2 Part number Ammo- A201 A301 A405 A605 Digit12-15 pack Taping pitch P ±1.0 Feed hole pitch P ±0.2 Center of wire P ±0.7 Center of body P ±1.3 Pitch of taping wire Component alignment Height of component from tape center F ** S ±2.0 H *** ±0.5 Carrier tape width W Hold down tape width W 0 6min 12min 12min 12min Hole position W ±0.5 Hold down tape sition W 2 1.5max 1.5max 1.5max 1.5max Feed hole dia. D ±0.2 Tape thickness t ±0.2 Fig.2 P= mm Packing Quantity Pitch (mm) / Box thinkness Ammo-pack (pcs/box) T(mm) Domestic Export Note: * P 0 =15mm is also available; **F can be other lead spacing; ***H=16.5mm is available; Page 11 of 12
11 5 Packing in bulk 5.1Out packing box for bulk 5.2 Inner packing box for bulk L:375mm L:355mm B:375mm B:175mm H:265mm H:118mm Plane drawing Overlooking Drawing Plane drawing Overlooking Drawing 薄膜电容器 收货方 : 型薄膜电容器 中国厦门法拉电子股份有限公司制造 标称电容量 电容量偏差 ± % 额定电压 (V) 引出线形状 中国厦门 发货方中国厦门法拉电子股份有限公司 5.3 Box size forammo-pack A=48±3; B=260±3; C=330±3 Page 12 of 12
SPECIFICATION FOR APPROVAL
RoHS Compliant SPECIFICATION FOR APPROVAL File No.: Q/FRK 0.GS.E.-F03 Product Name Product Type Safety class S3(P2) Metallized polypropylene film AC motor capacitor(box-type) [CBB61-S3(P2)] Product Code
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Voltage Rating
JSP. MKT Series J S P -
Loose Taped Fig.1 Fig. 2 JSP Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) Ød ±0.05 All dimensions are in mm.
X2 Metallized Polypropylene Film Capacitor JFV
FEATURES: Non-inductive, (UL940V-0) plastic case sealed with epoxy resin. Provides interference suppression with VDE, ENEC and UL approvals. SPECIFICATIONS: Operating Temperature -40 ~ +110 Maximum Continuous
R / WOUND technology from pitch 10 to 27.5mm (Rated Voltage from 63 to 1000Vdc) PRODUCT CODE SYSTEM
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 PRODUCT CODE SYSTEM p =
R60. MKT Series R 6 0 -
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 Product code system The
MWR - MWF Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low power switching applications. Low pulse operation
Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona
Tolerance code. Lead space
FEATURES Non-inductive construction. Self-healing. Flame-retardant plastic case and epoxy resin (compliance with UL 94V-0). High moisture-resistance. Good solderability (plated with 100% Matte Sn). APPLICATIONS
Type 160 Metallized Polyester Radial Lead Capacitors
Specifications Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric
Medium Power Film Capacitors
GENERAL DESCRIPTION Metallized polypropylene dielectric capacitor with controlled self-healing. Reinforced metallization developed for high impulse currents. APPLICATIONS IGBT protection IGBT clamping
Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona free performacnce. These capacitors are ideal in high frequency, high
CONTENTS TABLE OF MAIDA S HISTORY TERMINOLOGY & GENERAL SPECIFICATIONS. iii. LEAD CODES and TAPE & REEL STANDARD SERIES 1 HC SERIES 17
TABLE OF CONTENTS MAIDA S HISTORY TERMINOLOGY & GENERAL LEAD CODES and TAPE & REEL i ii iii STANDARD SERIES 1 HC SERIES 17 LOW PROFILE SERIES 33 THERMALLY PROTECTED SERIES 39 HIGH ENERGY SERIES LEAD CODES
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
TURQUOISE SWITCHES ABJ (BJ) SWITCHES
Ultra-miniature Size Sealed Switches TURQUOISE SWITCHES ABJ (BJ) SWITCHES Terminal type Mounting hole 2.3 mm type FEATURES Ultra-miniature size, High sealing performance sealed switches Elastomer double
Ceramic Disc Capacitors Safety Standard Approved Disc Capacitor
EATURES omplying with EN 132 400 and IE 60384-14, 2nd edition, including amendment 1.1995 High reliability Vertical (inline) kinked or straight leads. APPLIATIONS Across-the-line Line by-pass Antenna coupling.
Type 761M. Axial Lead Pressed/Oval Profile. Metallized Polypropylene Film Capacitors. Type 761M. Specifications
Axial Lead Pressed/Oval Profile Metallized Polypropylene Film Capacitors Specifications Capacitance Range: 0.012 to 65.0 µf Capacitance Tolerance: ±5% and ±10%, standard (tolerances as close as ±3% available)
Surface Mount Specialty Polymer Solid Aluminum Electrolytic Capacitors
FEATURES NEW X, Y, "Z", "U" & "V" TYPE HIGH RIPPLE CURRENT/VERY LOW ESR REPLACES MULTIPLE TANTALUM CHIPS IN HIGH CURRENT POWER SUPPLIES AND VOLTAGE REGULATORS FITS EIA (7343) D AND E TANTALUM CHIP LAND
REFERENCE SPECIFICATION
1 / 8 1. Notification Items 1.1 Law and the regulation which are applied 1 Ozone depleting substances specified by Montreal Protocol have not been used in the manufacturing process of the material used
RESISTORS, HEATERS, FLEXIBLE, SINGLE AND DOUBLE LAYER. ESCC Detail Specification No. 4009/002
Page 1 of 16 RESISTORS, HEATERS, FLEXIBLE, SINGLE AND DOUBLE LAYER ESCC Detail Specification Issue 8 February 2018 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
5KP-HR Series. TVS Diodes Axial Leaded 5 kw > 5KP-HR series. Description. Uni-directional
5KP-HR Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E2353 Bi-directional Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol
204-10SDRD/S530-A3 LAMP. Features. Description. Applications. Revision 1. LifecyclePhase: Expired Period: Forever. Choice of various viewing angles
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Description The series is specially designed
1224SUBC/C470/S400-A4
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free.(Br
The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure
General-purpose Limit Switch CSM_DA-_N_DS_E The Limit Switch with Better Seal, Shock Resistance, and Strength A double seal on the head, a complete gasket cover, and other features ensure a better seal
MODEL: T/R48-16H0Z-L12-01 ELECTRICAL SPECIFICATION:
PIEZO ULTRASONIC SENSOR SPECIFICATIONS MODEL: T/R48-16H0Z-L12-01 ELECTRICAL SPECIFICATION: 1 Center frequency (khz) 48±1 2 Echo Sensitivity (mv) 500 (FIG1, Fig 2 SIMULATION TEST CIRCUIT) 3 Decay Time (ms)
Thin-Film Technology. Accu-F / Accu-P Thin-Film RF/Microwave Capacitors.
Thin-Film Technology Accu-F / Accu-P Thin-Film RF/Microwave Capacitors 5 Accu-F / Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low
TVS Diodes Axial Leaded 30 kw > 30KPA-HRA series. Features. 30 kw 8.0 W 400 A. -55 to 175 C. Notes: 8.0 C/W
3KPA-HRA Series RoHS Pb e3 Descriptions AGENCY Uni-directional Agency Approvals Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
15KPA-HRA Series. TVS Diodes Axial Leaded 15 kw > 15KPA-HRA series. Descritions
5KPA-HRA Series RoHS Pb e3 Descritions Uni-directional The 5KPA-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level EK-L CSM_EK-L_DS_E 3 Liquid Level That Is Unaffected by the Color of the or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to mm or to mm Built-in Amplifiers to save space.
LAMP SUGC/S400-A5
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen
EALP05RDBRA0 LAMP. Features. Description. Applications. Choice of various viewing angles. Available on tape and reel. Reliable and robust
Features Choice of various viewing angles Available on tape and reel. Reliable and robust The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen free.
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
Series AM3T-VZ 3 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM3T-VZ FEATURES: Wide 2:1 Range 24 Pin DIP Package High up to 82% Metal Package Operating Temperature -4 o C to +85 o C / Isolation 15 or 35
Socket P2RF-05-S P2RF-08-S Clip & Release Lever Nameplate R99-11
Screwless Clamp Terminal Socket P2RF@@S Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double
PRODUCT SPECIFICATION FOR APPROVAL
FARNELL INST UK Issue : Date of issue : Mar 08,2010 Classification: New Change PRODUCT FOR APPROVAL Product Description : Product Part Number : (Panasonic Part Number : ) Country of Origin : Malaysia (It
333-2SURC/H3/S530-A4 LAMP. Features. Description. Applications. 1 Ver.:2 Release Date:12/13/2016 狀態 :Approved( 正式發行 )
Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Description The series is specially designed
5mm Infrared LED EAILP05RDDB1
Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Description Everlight
LAMP 339-9SUGSURSUBC/S1174
Features High efficiency. Selected minimum intensities. Available on tape and reel. The product itself will remain within RoHS compliant version Compliance with EU REACH Compliance Halogen free. (Br
E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)
Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless
Note: All batteries are supplied with only a residual charge and should be charged at the continuous charge rate before use.
RS Stock number 199-769 Description: For use in emergency lighting units and back-up applications. Voltage is 1.2V Note: All batteries are supplied with only a residual charge and should be charged at
5mm Infrared LED HIR7373B/L289
5mm Infrared LED Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version.
LAMP 336SURSYGWS530-A3
Features Two chips are matched for uniform light output, wide viewing angle Long life-solid state reliability I.C. compatible/low power consumption The product itself will remain within RoHS compliant
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
PolySwitch Radial-leaded Resettable Devices
PolySwitch Radial-leaded Resettable Devices Radial-leaded Raychem Circuit Protection has pioneered PPTC technology for over twenty years. Our radialleaded products represent the widest range of product
CONTENTS 2/9 1.1 OEM7474R. Specification for Buzzer. 1. Scope. 2. General. 3. Maximum Rating. 4. Electrical Characteristics. 5.
2/9 CONTENTS 1. Scope 2. General 3. Maximum Rating 4. Electrical Characteristics 5. Measuring Method 6. Physical Characteristics 7. Environmental Characteristics 8. Dimensions 9. Packaging Standard 10.
NO: REL-149 PRODUCT: G8P Series PCB Power Relay DATE: November 2014 TYPE: Discontinuation Notice
NO: REL-149 PRODUCT: PCB Power Relay DATE: November 2014 TYPE: Discontinuation Notice G8P PCB Power Relays to be DISCONTINUED April 30, 2015 Due to a diminishing global demand for the G8P series PCB Power
Technical Data Sheet 339-9SUGSURSUBC/S1182. Features. Descriptions. Applications. Device Selection Guide
Features Popular T-1 3/4 round package. Common anode. Built in red, green, and blue chips. Selected minimum intensities. Available on tape and reel. The product itself will remain within RoHS compliant
XSL-360-5E. UV LED 5 mm TECHNICAL DATA. Absolute Maximum Ratings (T a =25 C) Specifications (If=20mA, T a =25 C) Drawing
XSL-360-5E TECHNICAL DATA UV LED 5 mm Drawing Absolute Maximum Ratings (T a =25 C) Item Symbol Value Unit DC Forward Current I F 25 ma Peak Pulse Forward Current * 1 I FP 100 ma Power Dissipation P D 100
Equipment Accuracy / Selection
Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose
Medium Power Film Capacitors
The FB series uses a non-impregnated metallized polypropylene dielectric specially treated to have a very high dielectric strength in operating conditions up to 100 C. The FB has been designed for printed
5mm Infrared LED,T-1 HIR323C
,T-1 Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Compliance
RoHS. WS Series Snap Action Switch. Specifications. Part Number Configurator
Applications / Markets HVAC Electrical Housewares Floor Care Appliances Specifications White Goods Vending Machines Features & Benefits Medical Equipment RoHS Contact Rating: 0.5A @ 42VDC 1A @ 24VDC 2A
3mm Infrared LED,T-1 HIR204C
,T-1 Features High reliability High radiant intensity Peak wavelength λp=850nm 2.54mm Lead spacing Low forward voltage Pb Free This product itself will remain within RoHS compliant version. Description
Zelio Relays RSL Slim Interface Plug-In Relays
Zelio Relays RSL Slim Interface Plug-In Relays Catalog 8501CT0901 2009 Class 8501 CONTENTS Description............................................. Page Introduction.................................................3
MULTILAYER CERAMIC CHIP CAPACITORS
CGA Series Automotive Grade General (Up to 50V) Type: CGA1 [EIA CC0201] CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] CGA8 [EIA CC1812] CGA9 [EIA CC2220] Issue
Key Comparison of Safety Requirements in Europe, North America and Australia for Electronic Products
Key Comparison of Safety Requirements in Europe, North America and Australia for Electronic Products Mr. K.F. Siu 15 April, 2010 www.intertek.com 1 Presentation Agenda Standards For Audio/Video Product
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Product Specification
Ultrasonic Cold Water Meter Body Part Number: HS0014-000 Model Number: RC15/HS-US0004-000-01 Overview The Ultrasonic Cold Water Meter Body is comprised of a pair of ultrasonic flow sensors and a DN15 polymer
DATA SHEET. BZT03 series Voltage regulator diodes DISCRETE SEMICONDUCTORS Jun 11. Product specification Supersedes data of April 1992
DISCRETE SEMICONDUCTORS DATA SHEET handbook, 2 columns M3D116 Supersedes data of April 1992 1996 Jun 11 FEATURES Glass passivated High maximum operating temperature Low leakage current Excellent stability
Product Specification Spring Finger
Product Specification 108-115008-3 Spring Finger Restricted to Sony Ericsson Mobile Communications 1. SCOPE 1.1. Content This specification covers the requirements for product performance test methods
DATA SHEET. BZD23 series Voltage regulator diodes DISCRETE SEMICONDUCTORS Jun 10. Product specification Supersedes data of October 1991
DISCRETE SEMICONDUCTORS DATA SHEET ok, halfpage M3D119 Supersedes data of October 1991 1996 Jun 10 FEATURES Glass passivated High maximum operating temperature Low leakage current Excellent stability Zener
(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
GENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
SMPS Stacked MLC Capacitors
(SM Style) Technical Information on SMPS apacitors LTRIAL SPIFIATIONS Temperature oefficient 0G: A Temperature oefficient - 0 ±30 ppm/, -55 to +125 X7R: Temperature oefficient - ±15%, -55 to +125 Z5U:
JFET Description 司 MOXTEK ultra low noise JFETs (MX JFETs) are used in a variety of applications including microanalysis, EDXRF, XRD. MOXT
JFETs 司 www.detecto 先锋科技股份有限公司 www.detecto公司 www.detec Contents 司 www.detecto公司 www.detectorteo.com JFET Description JFET Packages JFET Drawings JFET Characteristics Noise Graphs 3 4 5-6 7 45 West 160
FEATURES AND BENEFITS. Meets UL/EN/IEC , 4Th ed. For EMC*
LPS Medical FEATURES AND BENEFITS Meets UL/EN/IEC60601-1-2, 4Th ed. For EMC* Approved To EN/IEC/UL60601-1, 3rd edition With Isolation Levels Which Satisfy The 2 MOPP Requirements Meets DoE Efficiency Level
THROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS
THROUGH-HOLE PACKAGING REELS, TUBES, AMMO PACKS & TAPING SPECIFICATIONS MINIMUM PACKAGING QUANTITY Device Type MINIMUM PACKAGING QUANTITY Available Packaging Bulk 13 Ø Tape & Reel Ammo Pack Quantity per
Karandikar Laboratories Pvt. Ltd., Gat No. 142, Boisar Chilhar Road, At Betegaon, Boisar (E), Taluka Palghar, Maharashtra
Last Amended on - Page 1 of 41 1 SAFETY 1. Safety Testing IEC 61010:2010 Single Fault Conditions IEC 61010-1 Cls. 4.4 And Similar Visual checks Verification of electrical parameters given on label IEC
RELAY PRODUCT GUIDE CONTENTS
RELAY PRODUCT GUIDE CONTENTS 1.0 ABOUT FUJITSU COMPONENTS 1.1 Who we are Page 2 2.0 PRODUCT LINE-UP 2.1 Automotive relays Page 3 2.2 Power relays Page 8 2.3 Signal relays Page 16 2.4 High frequency relays
Translation Principles of testing and certification for insulating hose assemblies on cable cutting devices
Translation Principles of testing and certification for insulating hose assemblies on cable cutting devices Status as of 2014-01 Principles of testing Insulating hose assemblies on cable cutting devices
About ABB Micafil Facts
About ABB Micafil Facts Location Zurich Employees ~ 200 Switzerland Revenues 2008 85 MUSD Production area 11 000 m 2 Export > 80%. About ABB Micafil History 1918 1939 1946 1960 1970 1972 1993 1996 1998
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
TeSys protection components
Presentation, description -pole thermal overload relays TeSys D Presentation TeSys D thermal overload relays are designed to protect a.c. circuits and motors against: b overloads, b phase failure, b excessively
BOURNS INDUCTIVE COMPONENTS
Ⅰ. Configuration and dimensions: REF. : REV. G ( 20150507 ) PGE 1 Marking ot is the Inductance code reading marking F E C ( PC Pattern ) Unit:m/m 7.50 ±0.3 5.00 ±0.3 C 2.60 ref. 8.00 ref. E 7.80 ref. F
SMARTen STP Patch Cords Features
Features Patch Cords are used in the work area and cross-connect generic cabling applications Comprise a length of eight-wire flexible patch cable, terminated with two eight-position RJ-45 plugs at each
ATM.ECO - Analog Pressure Transmitter
Pressure Transmitter ATM.ECO - Analog Pressure Transmitter CUSTOMER BENEFITS Entry level series into precision pressure measurement High measurement accuracy is ensured by sophisticated digital temperature
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
ACCESSORIES. Standard packing
ACCESSORIES HC RELAYS (Sockets and Terminal ) FEATURES. HC Relay Sockets In the table below, the suitable for each type of HC relay is indicated by a black dot. ) Plug-in type, type, and wrapping type
2-Phase Filters(Direct IEC Connector) RoHS. 250V AC 50/60Hz 1,2,3,6,10A KC, UL, CSA, VDE+ENEC, TÜV, CQC, 25 / 85 / 21
2-Phase Filters(Direct IEC Connector) IG IM IL IX ID Rated Voltage/ Frequency 1,2,3,6,10A KC, UL, CSA, VDE+ENEC, TÜV, CQC, Climatic Category IG, IX, ID : IM, IL : Plastic Case IG, IX, ID : Screw and PCB
NON-CATALOG. Features excellent image rejection, 27 db typ. low conversion loss, 7.0 db typ. aqueous washable J-leads for strain relief
NON-CATAG Surface Mount Image Reject Mixer Level 13 ( Power +13dBm) 2490 to 2550 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 200mW IF Current 40mA
MULTILAYER CERAMIC CHIP CAPACITORS
CGA Series Automotive Grade Conductive Epoxy Application Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: Jan 2014 REMINDERS Please read before
RF Chip Inductors. Wire-Wound , 0603, 0805, 1008, Pulse Electronics - leading supplier of magnetics for consumer applications
RF Chip Inductors Wire-Wound - 0402, 0603, 0805, 1008, 1206 Pulse Electronics - leading supplier of magnetics for consumer applications Table of Contents The 0402 to 1206 series range of Miniature Chip
Zener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification DESIGN SUPPORT TOOLS Models Available 949588 click logo to get started FEATURES Glass passivated junction Hermetically sealed package Clamping time in picoseconds
DULUX L LUMILUX DE LUXE
www.osram.com EXCELLENT COLOR RENDERING LUMILUX QTP - DL 2x55/220-240 GII 1 Benefits Impressive quality of light Extremly economical Excellent luminous flux Improved lumen maintenance Long service life
Watts. xppower.com. Input. General. Environmental. Output. EMC & Safety. Output Voltages from 2.5 V to 48 V. Non-standard Outputs Available
-0 Watts AEH Series s from. V to 8 V xppower.com Non-standard s Available Universal Input Single & Multiple Versions 0 C to +60 C Operating Temperature Efficiency up to 80% Non-standard Connectors Available
Prewired position switches FA series
Prewired position switches Technical data Housing Made of metal, coated with baked epoxy powder 2 m wired cable with 5x0,5 mm 2 wires marked SEV and IMQ Protection degree: IP6 General data Ambient temperature:
LSA 42.2 /43.2 / & 4 P
3542 en - 9.27 / d Alternators 11.5... 3 kva - 2 Pole 12... 135 kva - 4 Pole SA 42.2 / 43.2 / 44.2-2 & 4 P Single phase dedicated Electrical and mechanical data SA 42.2 /43.2 / 44.2-2 & 4 P Single phase
Aluminum Capacitors +85 C, Miniature, Axial Lead
Aluminum Capacitors +85 C, Miniature, Axial Lead FEATURES High CV per case size Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION
38999 Space grade ESA/SCC Section. MIL-DTL Space Grade Circular Connectors
38999 Space grade ESA/SCC 3401 Section II MI-DT 38999 Space Grade Circular Connectors 59 38999 Space Grade ESA/SCC 3401 Contents 38999 Space Grade ESA/SCC 3401 SCC Specification.......................................................61
High Curent Inductor / MPSZ Type
.Features: 1. Shielded construction. 2. Frequency range up to 1.0 MHz. 3. Lowest DCR / μh, in this package size..applications: 1. Handles high transient current spikes without saturation. 2. Ultra low
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
DULUX L LUMILUX IMPROVED LIFETIME & SYSTEM GUARANTEE. DULUX L LUMILUX & QUICKTRONIC TECHNICAL INFORMATION 1.
www.osram.com IMPROVED LIFETIME & SYSTEM GUARANTEE QTP-M 1x26-42 TECHNICAL INFORMATION 1 Benefits Extremly economical Good quality of light Excellent luminous flux Improved lumen maintenance Long service
SESI SMD Power Inductors and Transformers
39 SESI SMD Power Inductors and Transformers Microspire upgraded aircoil grid transfer + transfer moulding technology by using PLNR ferrites ; which lead to the SESI product range (SMD Energy Storage Inductors).
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
MODEL DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT
MODEL 863-000-200 DIGITAL ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.5 TO 100FT (0.15 TO 30M) OPERATING RANGE SERIAL OUTPUT DOCUMENT NO. 430-017C April 14, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875
REFERENCE SPECIFICATION
1 / 10 1. Notification Items 1.1 Law and the regulation which are applied 1 Ozone depleting substances specified by Montreal Protocol have not been used in the manufacturing process of the material used
Technical Data Sheet MF010-O-LC
Technical Data Sheet MF010-O-LC - 1 - 1. Properties The oxygen measuring system MF010-O-LC determines the oxygen content in gas mixtures up to a temperature of 250 C. It is particularly suitable for the
Data sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
THE BEST SELECTION OF QUALITY TWIST-ON WIRE CONNECTORS UNDER ONE BRAND
THE BEST SELECTION OF QUALITY TWIST-ON WIRE CONNECTORS UNDER ONE BRAND History since 1914 2 Packaging Choices 3 NE W 833 Wide Range / Ergonomic Compact Design 4 Marrette XTP 6 Marrette Type II Winged 8