OSHA Outreach Training Programs & Facility Site-Evaluations

Transcription

1 OSHA Outreach Training Programs & Facility Site-Evaluations Customized to Your Company HANDS ON! David Cook Occupational Safety & Health Compliance Specialist and OSHA Authorized Instructor Wise Safety Training Provides: OSHA 29 CFR 1926 CONSTRUCTION INDUSTRY OSHA 29 CFR 1910 GENERAL INDUSTRY OSHA 29 CFR 1915, 1917 & 1918 MARITIME INDUSTRY DOD EM-385 SAFETY & HEALTH REQUIREMENTS U.S. Army Corps of Engineers Our training programs and inspection processes are based on the applicable OSHA and DOD Regulations, ANSI standards (if referenced by OSHA) and the manufacturer s recommendations Training is conducted by an OSHA-authorized instructor in accordance with applicable regulations. Training is also customized to fit the needs of the client company and their specific regulations, applications and equipment. Classes can be held at the customer s facility or site. Certificate of Completion, test and sign-in listing (OSHA/ANSI requirements for training) will be provided to your employees upon the completion of their class. If you would like to schedule a class or need more information please contact Dephanie McGill at d.mcgill@wisesafetyenv.com or Boston Denver Houston Jacksonville Kansas City Louisville Little Rock Saint Louis Salt Lake City April 2017

2 INDIVIDUAL CLASSES Designed, Developed & Implemented by an Occupational Safty & Health Compliance Specialist and OSHA Authorized Instructor Non-Entry Rescue Non-Entry Rescue Entry Rescue Entry Rescue Permit-Required Confined Space Entry & Regulations (4 Hours) OSHA 29 CFR Permit-Required Confined Spaces and ANSI Z117.1 Safety Requirements for Confined Spaces Training Certification OSHA states that the employer shall provide training so that all employees whose work is regulated by this section acquire the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under this section. To fully understand the health and safety risks of entering and working in confined spaces, workers are required to take confined space entry training in compliance with OSHA requirements. The employer shall certify that the training required by this section has been accomplished. Confined spaces include, but are not limited to underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, and pipelines. Training shall be provided to each affected employee: Optional Simulated Non- Before the employee is first assigned duties under this section; Entry Rescue Operation Before there is a change in assigned duties; (1 Hour) for the entire class. Whenever there is a change in permit space operations that presents Call for details. a hazard about which an employee has not previously been trained; Whenever the employer has reason to believe either that there are deviations from the permit space entry procedures or that there are inadequacies in the employee s knowledge or use of these procedures. Atmospheric Testing and the Causes of a Hazardous Atmosphere; Continuous Forced Air Ventilation; Respiratory Equipment Options; Employee Duties (Entrants, Attendants & Entry Supervisor); Permit Space Evaluation Process; Rescue & Retrieval Equipment; Types Of Rescues; Training Requirements; Permit-Required Confined Space Programs including Entry & Hot Work Permits Permit-Required Confined Space Entry & Regulations with Simulated Non-Entry and Entry Rescue Operation (8 Hours) OSHA 29 CFR Permit-Required Confined Spaces and ANSI Z117.1 Safety Requirements for Confined Spaces Training Certification OSHA states that an employer whose employees have been designated to provide permit space rescue and emergency services shall take the following measures: Provide affected employees with the personal protective equipment (PPE) needed to conduct permit space rescues safely and train affected employees so they are proficient in the use of that PPE, at no cost to those employees; Train affected employees to perform assigned rescue duties. The employer must ensure that such employees successfully complete the training required to establish proficiency as an authorized entrant, as provided by paragraphs (g) and (h) of this section; Train affected employees in basic first-aid and cardiopulmonary resuscitation (CPR). The employer shall ensure that at least one member of the rescue team or service holding a current certification in first aid and CPR is available; Ensure that affected employees practice making permit space rescues at least once every 12 months, by means of simulated rescue operations in which they remove dummies, manikins, or actual persons from the actual permit spaces or from representative permit spaces. Representative permit spaces shall, with respect to opening size, configuration, and accessibility, simulate the types of permit spaces from which rescue is to be performed. Training shall be provided to each affected employee: Before the employee is first assigned duties under this section; Before there is a change in assigned duties; Whenever there is a change in permit space operations that presents a hazard about which an employee has not previously been trained; Whenever the employer has reason to believe either that there are deviations from the permit space entry procedures or that there are inadequacies in the employee s knowledge or use of these procedures. Atmospheric Testing and the Causes of a Hazardous Atmosphere; Continuous Forced Air Ventilation; Employee Duties (entrants, attendants & entry supervisor); Permit Space Evaluation Process; COST: $95/person. Certificate upon completion. Rescue/Retrieval Equipment and Respiratory Equipment Options; Types of Rescues; Training Requirements and Permit- Required Confined Space Programs including Entry & Hot Work Permits; How to Perform Assigned Rescue Duties Safely; Practice Making Permit Space Non-entry and Entry Rescues 2 Call Dephanie McGill ( ) for more information.

3 INDIVIDUAL CLASSES Confined Spaces in Construction (4 Hours) OSHA 29 CFR 1926 Subpart AA Confined Spaces in Construction and ANSI Z117.1 Safety Requirements for Confined Spaces Training Certification OSHA has released the final rule for Confined Space Entry in Construction, 29 CFR 1926 Subpart AA. Confined spaces include, but are not limited to: underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, sewer systems, storm water drains, water mains, crawl spaces, heating, ventilation, and air-conditioning (HVAC) ducts, and pipelines. Key provisions of the final standard require employers to: Optional Simulated Non- Determine what kinds of spaces their employees will be in, what Entry Rescue Operation hazards could be there, and how those hazards should be made safe; (1 Hour) for the entire class. Train each employee whose work is regulated by this standard; Develop and implement a written confined space program if employees Call for details. will enter permit spaces; Provide rescue and emergency services for employees who enter permit spaces, should anything go wrong. This training is required for employees that may have the opportunity to enter (authorized entrant), attend (attendant), or act as entry supervisors for work in confined spaces including permit-required confined spaces. The Permit Space Evaluation Process; Atmospheric Testing and the Causes of a Hazardous Atmosphere; Continuous Forced Air Ventilation; Respiratory Equipment Options; Permit Required Confined Space Programs (including entry & hot work permits and the responsibilities of entrants, attendants and entry supervisors); Rescue & Retrieval Equipment and Training Requirements Confined Space Confined Spaces in Construction with Simulated Non-Entry and Entry Rescue Operation (8 Hours) OSHA 29 CFR 1926 Subpart AA Confined Spaces in Construction and ANSI Z117.1 Safety Requirements for Confined Spaces Training Certification OSHA states that an employer whose employees have been designated to provide permit space rescue and/or emergency services must take the following measures and provide all equipment and training at no cost to those employees: 1. Provide each affected employee with the personal protective equipment (PPE) needed to conduct permit space rescues safely and train each affected employee so the employee is proficient in the use of that PPE; 2. Train each affected employee to perform assigned rescue duties. The employer must ensure that such employees successfully complete the training required and establish proficiency as authorized entrants, as provided by and of this standard; 3. Train each affected employee in basic first aid and cardiopulmonary resuscitation (CPR). The employer must ensure that at least one member of the rescue team or service holding a current certification in basic first aid and CPR is available; and 4. Ensure that affected employees practice making permit space rescues before attempting an actual rescue, and at least once every 12 months, by means of simulated rescue operations in which they remove dummies, manikins, or actual persons from the actual permit spaces or from representative permit spaces. Representative permit spaces must, with respect to opening size, configuration, and accessibility, simulate the types of permit spaces from which rescue is to be performed. This training is required for employees that may have the opportunity to enter (authorized entrant), attend (attendant), or act as entry supervisors for work in confined spaces including permit-required confined spaces. The Permit Space Evaluation Process; Atmospheric Testing and the Causes of a Hazardous Atmosphere; Continuous Forced Air Ventilation; COST: $95/person. Certificate upon completion. Rescue & Retrieval Equipment and Respiratory Equipment Options; Permit Required Confined Space Programs (including entry & hot work permits and the responsibilities of entrants, attendants and entry supervisors); How to Safely Make Non-entry and Entry Rescues and Training Requirements Confined Space Non-Entry Rescue Non-Entry Rescue Confined Space 3

4 INDIVIDUAL CLASSES Ask how we can CUSTOMIZE your training program(s)! Grain Handling Facilities Grain Handling Facilities with Simulated Non-Entry & Entry Rescue Operation (8 Hours) 29 CFR Grain Handling Facilities; ANSI Z117.1 Safety Requirements for Confined Spaces; The Control of Hazardous Energy; Welding, Cutting, and Brazing; OSHA CPL , Subject: Combustible Dust National Emphasis Program; and NFPA 61 Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities OSHA states that employers of grain handling facilities must provide training to employees at least annually and when changes in job assignment will expose them to new hazards. Current employees, and new employees prior to starting work, must be trained in at least the following: General safety precautions associated with the facility, including recognition and preventive measures for the hazards related to dust accumulations and common ignition sources such as smoking; and, Specific procedures and safety practices applicable to their job tasks, including but not limited to, cleaning procedures for grinding equipment, clearing procedures for choked legs, housekeeping, hot work, preventive maintenance and lockout/tagout procedures; Employees assigned special tasks, such as bin entry and handling of flammable or toxic substances, must be provided training to perform these tasks safely. Training for an employee who enters grain storage structures includes training about engulfment and mechanical hazards and how to avoid them. The grain handling industry is a high hazard industry where workers can be exposed to numerous serious and life threatening hazards. These hazards include: fires and explosions from grain dust accumulation, suffocation from engulfment and entrapment in grain bins, falls from heights and crushing injuries and amputations from grain handling equipment. Grain handling facilities are facilities that may receive, handle, store, process and ship bulk raw agricultural commodities such as (but not limited to) corn, wheat, oats, barley, sunflower seeds, and soybeans. Grain handling facilities include grain elevators, feed mills, flour mills, rice mills, dust pelletizing plants, dry corn mills, facilities with soybean flaking operations, and facilities with dry grinding operations of soycake. Grain Entrapment Rescue Sleeves and Auger Housekeeping; Lock-Out/Tag-Out and Grain Bin-Entry Procedures; Entry Permits; Machine, Engulfment, Entrapment and Atmospheric Hazards; Atmospheric Testing; Floor and Wall Openings and Open-sided Floors; Respirator and Continuous Forced Air Ventilation Preventative Maintenance and Inspections; Equipment; Hot Work and Ignition Control; Fall and Engulfment Protection; Grain Dust Fires and Explosions Non-Entry & Entry Rescue & Retrieval Equipment, Procedures and Training Requirements; Hands-On Activities include: Students will demonstrate their ability to use a Fall Arrest & Restraint Systems, Overhead Rescue & Retrieval Systems and Grain Rescue Tubes & Auger. COST: $125/person. Certificate upon completion. Fall Protection Authorized Person Fall Protection Equipment & Regulations (4 Hours) OSHA 29 CFR 1926 Subpart M Fall Protection; and Guarding Floor & Wall Openings & Holes Training Certification OSHA states that the employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. Falls are among the most common causes of serious work-related injuries and deaths. Employers must take measures in their workplaces to prevent employees from falling off overhead platforms, elevated work stations or into holes in the floor and walls. nstrations with Harnesses; Lanyards, Self-retracting Lifelines, Anchor Points, etc.; Tie-off Techniques; Estimation of Free Fall Distance; Application Limits; Proper Anchoring; Swing Fall; Total Fall Distance to Prevent Striking a Lower Level; 4 Call Dephanie McGill ( ) for more information. Vertical and Horizontal Lifelines; Elongation; Deceleration Distance; Equipment Inspection Process

5 INDIVIDUAL CLASSES Designated Competent Person Fall Hazard Awareness Training Course (8 Hours) OSHA 29 CFR 1926 Subpart M Fall Protection; Subpart E Personal Protective Equipment; Subpart L Scaffolding; 29 CFR 1910 Subpart D Walking/Working Surfaces; Subpart F Powered Platforms, Manlifts, & Vehicle Mounted Work Platforms OSHA states that every employee who might be exposed to fall hazards shall receive training on recognizing the hazards of falling, and the procedures to be followed in order to minimize these hazards (OSHA 29 CFR (a)(1). The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. Falls are among the most common causes of serious work-related injuries and deaths. Employers must take measures in their workplaces to prevent employees from falling off overhead platforms, elevated work stations or into holes in the floor and walls. This course satisfies the training and retraining requirements for OSHA 29 CFR 1926 Subpart M - Fall Protection Standard and incorporates both written and practical examinations. This training program will address the following categories: OSHA 29 CFR 1926 Subpart M Fall Protection Regulations with Equipment Inspection Process and the Fall Protection Equipment and Regulations that are relative to: Aerial Lifts ( ); Vehicle-Mounted Elevating and Rotating Aerial Devices (ANSI A ) and Scissor Lifts ( [W]); Portable Metal Ladders ( ); Manually Propelled Mobile Ladder Stands ( ); and Standards for Fiberglass/Reinforced Plastic Ladders, (ANSI-ASC A ); Supported Scaffolding (1926 Subpart L); Permit-Required Confined Space Equipment and Regulations ( ); and 29 CFR 1910 Subpart D Walking/Working Surfaces. Designated Competent Person Hands-On Activities include: Students will demonstrate their ability to properly don a full body harness, the proper use of Horizontal & Vertical Fall Arrest & Restraint Lifeline Systems, the proper use of Suspension Trauma Straps and the ability to recognize Incompatible Connections. COST: $95/person. Designated Competent Person Training Certificate and wallet card upon completion. EM385/ANSI Competent Person Fall Protection Training Course (24 Hours) U.S. Army Corps of Engineers SAFETY AND HEALTH REQUIREMENTS, OSHA 29 CFR 1926 Subpart M -Fall Protection, Subpart E -Personal Protective Equipment, Subpart L Scaffolding and 29 CFR 1910 Subpart D -Walking/Working Surfaces, Subpart F -Powered Platforms, Manlifts, & Vehicle Mounted Work Platforms. & ANSI/ASSE Z359.2 The Competent Person training enables the attendee to be responsible for the immediate supervision, implementation and monitoring of a managed fall protection program and incorporates both written and practical examinations. Upon completion of this course, you will receive a certificate acknowledging you have met or exceeded OSHA and ANSI requirements as a Competent Person and Competent Inspector. Roles and Responsibilities; Training; Fall Protection Program; Controlled Access Zones; Fall Protection Systems; Covers, Safety Net Systems Hands-On Activities include: Students will demonstrate their ability to properly don a full body harness, the proper use of Horizontal & Vertical Fall Arrest & Restraint Lifeline Systems, the proper use of Suspension Trauma Straps and the ability to recognize Incompatible Connections. COST: $295/person. Certificate upon completion. for Fall Protection; Personal Fall Protection Systems; Ladder-Climbing Devices (LCDs); Scaffolds, Work Platforms and Elevating/Aerial Platforms; Warning Line Systems (WLS); Safety Monitoring System (SMS); Rescue Plan and Procedures; Working Over or Near Water; Other Engineered Fall Protection Systems Student donning a harness Student using a horizontal lifeline Student using suspension trauma straps 5

6 INDIVIDUAL CLASSES Designed, Developed & Implemented by an Occupational Safty & Health Compliance Specialist and OSHA Authorized Instructor Forklifts Forklift Operator Training & Regulations (3½ Hours) OSHA 29 CFR Powered Industrial Trucks & ANSI Safety Standard for Powered Industrial Trucks Training Certification OSHA states that before any employee is allowed to operate a conventional forklift, the employer is required to demonstrate that an employee has successfully completed a forklift training and evaluation course of study. Second only to highway accidents, powered industrial truck accidents are one of the leading causes of fatalities in industry. All powered industrial truck operators must be trained and certified. Forklift Types; Rearsteering; Turning Radius; Combined Center of Gravity and the Stability Triangle; Load Center and Controls; Load Capacity; Proper Load Positioning and Handling; Hazard Awareness; Picking; Traveling with and Placing a Load; Parking; Refueling and Battery Charging; Pre-operation Inspection COST: $55/person. Certificate and wallet card upon completion. Optional Driving Performance test (required by OSHA) available, call for details and price. (visual and operational checks); Maintenance Lockout/Tagout Lockout / Tagout Equipment & Regulations (4 Hours) OSHA 29 CFR The Control of Hazardous Energy (Lockout/Tagout) Training Certification OSHA states that employees need to be trained to ensure that they know, understand, and follow the applicable provisions of the hazardous energy control procedures. The training must cover at least three areas: aspects of the employer s energy control program; elements of the energy control procedure relevant to the employee s duties or assignment; and the various requirements of the OSHA standards related to lockout/tagout. Electrical, hydraulic, mechanical, pneumatic, and other forms of energy run nearly everything in our workplace today. If uncontrolled, each of these pose a significant hazard. Death and serious injury can result from an unexpected startup, or the release of hazardous energy. Lockout/tagout procedures are written steps used for affixing lockout or tagout devices to energy isolating devices to bring a machine to a zero-energy state. By using a lockout/tagout procedure, employees can help protect themselves from unexpected re-energization or release of stored energy. OSHA lockout/tagout safety training and procedures have been developed to prevent this from happening and to safeguard employees. Control of Hazardous Energy; Servicing and Maintenance of Machines and Equipment in Which the Unexpected Energization or Start Up of the Machines or Equipment, or Release of Stored Energy Could Cause Injury to Employees; Affected and Authorized Employee Duties; Energy Isolating Devices; Energy Control Program; Energy Control Procedures; Protective Materials and Hardware; Training Portable Ladders Portable & Fixed Ladders, Mobile Ladder Stands, Industrial Stairs & Regulations (3½ Hours) 29 CFR , Subpart I and ANSI Portable Reinforced Plastic Ladders OSHA states that employers must provide a training program for each employee using ladders and stairways. The program must enable each employee to recognize hazards related to ladders and stairways and to use proper procedures to minimize these hazards. This training program will cover basic concepts, industry safety regulations and standards, responsibilities in the workplace, the hazards of working on and around ladders and stairways, different types of ladders and their intended uses, and hazard control measures to follow when you use a ladder or stairway to accomplish job tasks in your workplace. This Stairway and Ladder Safety Training Course is designed for workers in all industries, emphasizing hazard identification and safe work practices that apply to the use of ladders and stairways. Establish Prescribed Rules and Minimum Requirements for the Care, Use and Inspection of the Common Types of Portable Metal, Fiberglass and Fixed Ladders and Manually Propelled Mobile Ladder Stands (airplane stands). 6 Call Dephanie McGill ( ) for more information.

7 INDIVIDUAL CLASSES Aerial & Scissor Lifts & Regulations (4 Hours) OSHA 29 CFR Aerial lifts; , , & Vehicle-Mounted Elevating and Rotating Work Platforms; and ANSI/SIA A Vehicle Mounted Elevating and Rotating Work Platforms Training Certification OSHA states that only trained and authorized persons are allowed to operate aerial or scissor lifts. This combination Aerial Lift and Scissor Lift course will provide training and certification in the OHSA and ANSI required safety concepts and the procedures to help reduce workplace accidents and provides documentation of training. Explanations of Electrical, Fall, and Falling Object Hazards; Procedures for Dealing With Hazards; Maximum Intended Load and Load Capacity; Inadequate Ceiling Heights and Overhead Obstructions; Drop-offs, Holes, or Unstable Surfaces Such as Loose Dirt, Slopes, Ditches, or Bumps; Debris and Floor Obstructions; High Wind and Other Severe Weather Conditions; Hazardous Atmospheres; Frequent and Periodic Inspections; Maintenance; Record Keeping; Safe Work Practices; Vehicle Stability; Training Requirements and the Applicable Fall Protection Regulations & Equipment for both Aerial and Scissor Lifts COST: $55/person. Certificate and wallet card upon completion. Optional Aerial & Scissor Lift Driving Performance Test (required by OSHA) available, call for details and price. Aerial & Scissor Lifts Introduction to Machinery & Machine Guarding Equipment & Regulations (4 Hours) OSHA 29 CFR Machinery & Machine Guarding through ; ANSI B Safety of Machinery; General Requirements & Risk Assessment; and B Machine Guarding Standards OSHA states that the employer shall certify that employees have been trained by preparing a certification record which includes the identity of the person trained, the signature of the employer or the person who conducted the training, and the date the training was completed. The certification record shall be prepared at the completion of training and shall be maintained on file for the duration of the employee s employment. Amputations, crushed hands and arms, lacerations, abrasions and blindness are just a few of the possible injuries created by moving machine parts. Any machine part, function, or process which many cause injury must be safeguarded. When the operation of a machine or accidental contact with it can injure the operator or others in the vicinity, the hazards must be either controlled or eliminated. This training program will address general requirements for machine safeguarding as mandated by OSHA. This training is intended for all persons working in or around machinery with hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Designed to help employees understand the dangers of working with machinery and how those risks can be minimized by proper installation and use of safety guards and devices Basic Machine Operations; Fixed Guards; Adjustable and Self-adjusting Guards; Interlock Devices; Drive Train and Perimeter Guards; Drop Probe Devices; Restrain and Pullback Devices; Optional Equipment Inspection. Call for details and price. Adjustment, Inspection and Maintenance of Safety Guards Machinery & Machine Guarding 7

8 INDIVIDUAL CLASSES Ask how we can CUSTOMIZE your training program(s)! Overhead & Gantry Crane (Lifting) Material Handling Equipment & Regulations (4 Hours) OSHA 29 CFR Overhead & Gantry Cranes; Materials Handling & Storage and ANSI/ASME B30.16 Overhead Hoists; ASME B30.21 Manually Lever Operated Hoist; B Slings; B30.11 Monorails & Underhung Cranes; and B30.20 Below the Hook Lifting Devices OSHA states that employers must permit only thoroughly trained and competent workers to operate cranes. As an employer, you must designate a Competent Person to conduct inspections of slings before and during use, especially when service conditions warrant. An OSHA Competent Person is defined as one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them. By way of training and/or experience, a competent person is knowledgeable of applicable standards, is capable of identifying workplace hazards relating to the specific operation, and has the authority to correct them. Covers Alloy Steel Chain, Wire Rope, Synthetic Web Slings, Shackles, Hooks, Portable Handheld Hoists and Manually Operated Lever Hoists; Overhead & Gantry Cranes; Rated Load Marking; Clearance From Obstruction; Designated Personnel; Stops, Bumpers, Rail Sweeps & Guards; Pendant Control Boxes; Frequent & Periodic Inspections, Hoist Chains, Operational Tests, Preventive Maintenance; Limit Switches; Handling the Load; Manually Lever Operated Hoist (come-a-longs) Respiratory Respiratory Equipment & Regulations (4 Hours) OSHA 29CFR Respiratory Protection Training Certification OSHA states that employers are required to provide respiratory protection training to workers who wear respirators on the job, at least every 12 months. This annual retraining will refresh your memory on the information and skills you need to use a respirator correctly. It gives you a chance to practice with a respirator and to ask questions and discuss worksite-specific respirator use with your instructor. A respirator can t protect you if you don t know how to use it properly. Why you need to use the respirator, what the respirator can and cannot do to protect you; How to properly inspect, put on and take off, and use your respirator; How to check the seal of your respirator (also called a user seal check ); How to use the respirator effectively in emergency situations; How to recognize medical signs and symptoms that may limit or prevent you from using a respirator; How improper fit, usage, or maintenance can reduce your respirator s ability to protect you; Procedures for selecting respirators; Medical evaluations; Fit-testing procedures; What the procedures are for cleaning, disinfecting, storing, inspecting,and maintaining respirators; General use of filtering facepiece respirators (disposable), Air Purifying Respirators (APR), Supplied Air Respirators (SAR), Powered Air Purifying Respirators (PAPR), Self-Contained Breathing Apparatus (SCBA) and their Assigned Protection Factors Optional Qualitative Fit Testing available (1 hour). Call for details and price. Disclaimer Our training classes and site-evaluations have been designed to assist you in complying with OSHA regulations. The materials provided are not meant to be a substitute for the OSHA regulations. Because of the variations that can occur due to on-site conditions, whether you are in a state plan, or performance criteria, it is impossible for any course to cover every aspect of those potential variations. Therefore, our courses do not cover everything a person should know about a particular subject nor does it qualify anyone as a competent person. However, our courses do cover part of the information that any person must know to be effective in applying safety and health standards and practices to circumstances in the work place. 8 Call Dephanie McGill ( ) for more information.

9 INDIVIDUAL CLASSES Personal Protective Equipment & Regulations (4 Hours) OSHA 29 CFR General Requirements; Eye & Face Protection; Respiratory; Head Protection, Foot Protection; Hand Protection; Hearing Protection Training Certification OSHA states that the employer shall provide training to each employee who is required by this section to use PPE. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment. OSHA requires that employers protect their employees from workplace hazards that can cause injury. This training program will address the categories of PPE training required by OSHA including: Head Protection, Eye and Face Protection, Hearing Protection, Hand and Foot Protection. PPE Hazard Assessment Program; Safety Data Sheets; Skin Absorption of Harmful Substances; Chemical Resistant Charts; Limitations of the Selected PPE; Occupational Noise Exposure; Symptoms of Overexposure to Noise; Elements of Hearing Conservation Program; Classes and Types of Hard Hats Respirator Types Fit Testing & User Seal Check Personal Protective Equipment Walking-Working Surfaces & Personal Protective Equipment Fall Protection Systems (4 hours) 29 CFR part 1910, Subpart D and Subpart I OSHA states that falls from heights and on the same level (a working surface) are among the leading causes of serious work-related injuries and deaths. OSHA estimates that, on average, approximately 202,066 serious (lost-workday) injuries and 345 fatalities occur annually among workers directly affected by the final standard. OSHA s final rule on Walking-Working Surfaces and Personal Fall Protection Systems better protects workers in general industry from these hazards by updating and clarifying standards and adding training and inspection requirements.the rule affects a wide range of workers, from window washers to chimney sweeps. The rule incorporates advances in technology, industry best practices, and national consensus standards to provide effective and cost-efficient worker protection. Specifically, the rule updates general industry standards addressing slip, trip, and fall hazards (subpart D), and adds requirements for personal fall protection systems (subpart I).The rule benefits employers by providing greater flexibility in choosing a fall protection system. This rule became effective on Jan. 17, Guarding floor and wall openings and holes, Stairway & Ladderway Floor Openings, Hatchway or Chute Floor Openings, Railings; Protection from Falling Objects; Guardrail, Safety Net; Personal Fall Arrest Safety Monitoring and Warning Line Systems Unprotected sides & edges; Covers, Skylight Screens Fixed industrial stairs Portable wood and metal ladders Manually propelled mobile ladder stands and other working surfaces Fixed ladders Walking/Working Surfaces GHS: The New Hazard Communication System (4 Hours) OSHA 29 CFR Hazard Communication & 2012 Revised Hazard Communication Standard (HCS) Training Certification OSHA states that employer s must train all affected employees on the new label elements (i.e., pictograms, hazard statements, precautionary statements, and signal words) and safety data sheets format to facilitate recognition and understanding no later than December 1, 2013, while full compliance with the final rule will begin in It is important to ensure that when employees begin to see the new labels and SDS s in their workplaces, they will be familiar with them, understand how to use them, and access the information effectively. The changes focus on: Hazard Classification, Labeling and Marking, Safety Data Sheets (SDS) and Information Distribution and Training. This course is designed to assist employees in learning about work hazards, how to protect themselves, and include the revisions that align with the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Who Should Take This Course: All workers exposed to hazardous chemicals in all industrial sectors, all employers who subject their employees to hazardous chemicals and all employers who have employees that are exposed to hazardous chemicals.. OSHA s Hazard Communication Standard, Globally Harmonized System of Classification (GHS), the primary Hazard Communications Standard responsibilities for employers, Understand the key changes to OSHA s HazCom Standard, GHS Compliance Dates, Hazard Classification (provides new criteria for classifying chemical hazards), Labels (must include a signal word, pictogram, hazard statement and precautionary statement), Safety Data Sheets (SDS s must follow a new, 16-section format), Information Distribution and Training. 9

10 INDIVIDUAL CLASSES Designed, Developed & Implemented by an Occupational Safty & Health Compliance Specialist and OSHA Authorized Instructor Excavation, Trenching and Soil Mechanics Introduction to Excavation, Trenching and Soil Mechanics (4 Hours) OSHA 29 CFR Subpart P Excavations & ANSI A10.12 Safety Requirements for Excavation Training Certification OSHA states that daily inspections of excavations, the adjacent areas, and protective systems shall be made by a competent person for evidence of a situation that could result in possible cave-ins, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions. An inspection shall be conducted by the competent person prior to the start of work and as needed throughout the shift. Inspections shall also be made after every rainstorm or other hazard increasing occurrence. Inspections must be conducted by a competent person who: Has training in soil analysis; Has training in the use of protective systems; Is knowledgeable about the OSHA requirements; Has authority to immediately eliminate hazards. This course focuses on the Trenching and Excavation Safety Standard for the Construction Industry as described in OSHA 29 CFR 1926 Subpart P and will address identification and correction of hazards, soil testing methods, trench protection systems, and general safety requirements. Surface Encumbrances; Underground Installations; Access and Egress; Exposure to Vehicular Traffic; Exposure to Falling Loads; Warning System for Mobile Equipment; Hazardous Atmospheres; Protection from Hazards Associated with Water Accumulation; Stability of Adjacent Structures; Protection of Employees From Loose Rock or Soil; Inspections; Fall Protection; Protection of Employees in Excavations; Sloping and Benching Systems; Support Systems; Shield Systems; Materials and Equipment; Installation and Removal of Support; Types of Shoring (wood timbers and hydraulic); Soil Testing Methods and Portable Gas Detection Equipment for Atmospheric Testing Welding Welding, Cutting & Brazing Equipment & Regulations (4 Hours) 29 CFR 1910 Subpart Q Welding, Cutting, and Brazing; ANSI Z49.1:2012 Safety in Welding, Cutting & Allied Processes; and NFPA 51B Standard for Fire Prevention During Welding, Cutting, and Other Hot Work OSHA states that management shall recognize its responsibility for the safe usage of cutting and welding equipment on its property and insist that cutters or welders and their supervisors are suitably trained in the safe operation of their equipment and the safe use of the processes. Employees exposed to the hazards created by welding, cutting, or brazing operations shall be protected by personal protective equipment in accordance with the requirements of Appropriate protective clothing required for any welding operation will vary with the size, nature and location of the work to be performed. Workmen in charge of the oxygen or fuel-gas supply equipment, including generators, and oxygen or fuel-gas distribution piping systems shall be instructed and judged competent by their employers for this important work before being left in charge. Hot work mishaps are responsible for thousands of injuries and millions of dollars in property damage every year. Any welding, soldering, cutting or brazing can cause burns, eye damage, and fires, virtually every industry is at risk. Arc welding is a safe occupation when sufficient measures are taken to protect the welder from potential hazards. When these measures are overlooked, welders can encounter such dangers as electric shock, overexposure to fumes and gases, arc radiation, and fire and explosion. Fire Prevention and Protection; Fire Watches; Personnel Protection Equipment (PPE); Health Protection and Ventilation; Cylinders and Containers; Safety Precautions; Regulator & Hose Handling & Storage; Common Hazards Associated with Various Types of Hot Work; Welding Processes (SMAW, MIG, Optional Walk-Through Inspection, call for details and price. FCAW, TIG, etc.); Welding in Confined Spaces; Respiratory Protection, Selection (mask, filters and cartridges); Hexavalent Chromium Standards ( & ) 10 Call Dephanie McGill ( ) for more information.

11 INDIVIDUAL CLASSES Introduction to Combustible Dust Regulations (4 Hours) 29 CFR Grain Handling Facilities; OSHA CPL , Subject: Combustible Dust National Emphasis Program & NFPA 654 Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids OSHA states in their OSHA Combustible Dust National Emphasis Program, that two of the most common citations were improper housekeeping, including combustible dust accumulation, and use of compressed air to blow down combustible dust. Combustible dusts are any combustible solid material composed of distinct particles or pieces, regardless of shape, size or chemical composition that presents a fire or deflagration (explosion) hazard when suspended in air. The National Fire Protection Association (NFPA) states that any material that will burn in air as a solid can be explosive in a finely-divided form, and any industrial process that reduces materials into small particles presents a potential for a serious fire or explosion. Combustible dusts are often either organic or metal dusts that are finely ground into very small particles, fibers, fines, chips, chunks, flakes, or a small mixture of these. Types of dusts include, but are not limited to: metal dust, such as aluminum and magnesium; wood dust; plastic dust; biosolids; organic dust, such as sugar, paper, soap, and dried blood; and dusts from certain textiles. Some industries that handle combustible dusts include: agriculture, chemicals, textiles, forest and furniture products, wastewater treatment, metal processing, paper products, pharmaceuticals, and recycling operations (metal, paper, and plastic). Therefore, the directive covers a wide range of materials used in many application areas across almost all the major industrial and agricultural sectors. Prevention of Fire and Dust Explosions From the Manufacturing, Processing, and Handling of Combustible Particulate Solids; Process & Facility Design; Bulk Storage Enclosures; Duct Systems; Air-moving Devices (fans & blowers); Fugitive Dust Control; Housekeeping; Ignition Sources: mechanical sparks, electrical equipment; Static electricity, open flames & sparks; Optional Walk-Through Inspection, call for details and price. Hot surfaces & industrial trucks; Fire Protection (fire extinguishers, automatic sprinklers, etc.); Employee Training, Inspection and Maintenance Combustible Dust Electrical Regulations (4 Hours) NFPA 70E, 29 CFR 1926 Subpart K & 1910 Subpart S OSHA states that the training requirements contained in this section (29 CFR Training) apply to employees who face a risk of electric shock that is not reduced to a safe level by the electrical installation requirements of through This course covers the requirements for working safely in an electrical environment and assists in meeting the mandated training requirements of OSHA OSHA specifically mandates employer assessment of generally recognized hazards in the workplace and provisions for protecting the employee from those hazards. Students are familiarized with updates to OSHA, NFPA 70E, NEC and PPE improvements. Information is provided to help realize the benefits of an electrical safety program which result in fewer electrical accidents, improved power system reliability, OSHA compliance and potential reductions in losses due to accidents and injuries. This course meets mandated training requirements of OSHA and.269 and improves ability to interpret OSHA, the National Electrical Safety Code (NESC), ASTM and other applicable electrical safety regulations. Applying these best practices is essential to preventing electrical accidents, outages and equipment damage. Designed to provide the student with a survey of OSHA s electrical standards and the hazards associated with electrical installations and equipment. Topics Include: Single & Three Phase Systems; Cord & Plug Connected & Fixed Equipment; Grounding; Ground Fault Circuit Interrupters; COST: $150/person. Certificate upon completion. NFPA 70E Safety Related Work Practices Electrical Regulations 11

12 SCAFFOLDING Ask how we can CUSTOMIZE your training program(s)! OSHA Scaffolding Requirements: The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffolding being used and to understand the procedures to control or minimize those hazards. The employer shall also have each employee who is involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize the hazards associated with the work in question. When the Employer has reason to believe that an employee lacks the skill or understanding needed for safe work involving the erection, use or dismantling of scaffoldings, the employer shall retrain each such employee. SCAFFOLDING TRAINING 29 CFR through and Scaffolding User Course (4 Hours) OSHA States that the employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable: 1. The nature of any electrical hazards, fall hazards and falling object hazards in the work area; 2. The correct procedures for dealing with electrical hazards and for erecting, maintaining, and disassembling the fall protection systems and falling object protection systems being used; 3. The proper use of the scaffold, and the proper handling of materials on the scaffold; 4. The maximum intended load and the load-carrying capacities of the scaffolds used; and 5. Any other pertinent requirements of this subpart. The purpose of this course is to provide scaffold users with the OSHA regulations, safety guidelines and procedures needed to recognize the hazards associated with scaffolding and to understand the procedures to control and eliminate those hazards. Determine the basic elements of a safe platform; Determine the nature of electrical hazards; Fall Hazards; Falling Object Hazards; Material Handling Hazards; Overloading Hazards and Prohibited User Actions for Frame; Rolling Towers; Tube & Clamp and System Type Scaffolds. Course Includes: Scaffold training manual and certificate included. COST: $75/person. Certificate upon completion. Scaffolding Competent Person / Inspector Course (8 Hours) OSHA states that the employer shall have each employee who is involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question. The training shall include the following topics, as applicable: 1. The nature of scaffold hazards; 2. The correct procedures for erecting, disassembling, moving, operating, repairing, inspecting, and maintaining the type of scaffold in question; 3. The design criteria, maximum intended load-carrying capacity and intended use of the scaffold; 4. Any other pertinent requirements of this subpart. This class is excellent for Competent Inspectors. Competent person training for frame, tube & coupler and system type scaffolds; Detailed coverage of the OSHA scaffold regulations; Recommended assembly procedures; Step by Step Assembly Instructions; and Scaffolding Inspection Checklist. It is the prerequisite for the Scaffolding Erection & Dismantling Course. Course Includes: STI Scaffold training manual (340 pages) with step by step assembly instructions, STI and OSHA inspection checklists, wallet card and certificate. COST: $115/person. Certificate and wallet card upon completion. 12 Call Dephanie McGill ( ) for more information.

13 SCAFFOLDING SCAFFOLDING TRAINING (continued) 29 CFR through and Scaffolding Erection & Dismantling Course (8 Hours) OSHA states in Appendix D that scaffold erectors and dismantlers should all receive the general overview, and, in addition, specific training for the type of supported scaffold being erected or dismantled and that employees erecting or dismantling scaffolds should be trained in the following topics: General Overview of Scaffolding: Regulations and Standards Erection/Dismantling Planning PPE and Proper Procedures Fall Protection Materials Handling Access Working Platforms Foundations Guys, Ties and Braces Specific Training for the Type of Scaffolding Includes: Specific Regulations and Standards Components Parts Inspection Erection/Dismantling Planning Guys, Ties and Braces Fall Protection General Safety Access and Platforms Erection/Dismantling Procedures Rolling Scaffold Assembly Putlogs This class consists of practical hands-on erecting and dismantling of your existing scaffolding system and is recommended for anyone with limited hands-on experience. Practical Hands-on Erection and Dismantling of Frame and/or Tube & Coupler and/or System Type Scaffolds (1-2 levels). Certificate upon completion. Prerequisite: Scaffolding Competent Person Course. COST: $115/person. Certificate upon completion. 13

14 HAZWOPER Hazardous Waste Operations & Emergency Response (HAZWOPER) Training Programs 29 CFR Designed, Developed & Implemented by an Occupational Safty & Health Compliance Specialist and OSHA Authorized Instructor HAZWOPER 40-Hour Course: This course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. Regulations Overview; Safety & Health Plans; Site Characterization; Toxicology; Hazard Recognition; Chemical Awareness; Radiation Hazards; Site Control; Decontamination; Medical Surveillance; Material Sampling; Safe Work Practices; Confined Spaces; Excavation and Emergency Procedures. Hands-On Respiratory Equipment (Half & Full Face w/cartridges, PAPR, airline, SCBA), Clothing Ensembles (A, B, C & D), Foot, Face & Hand, Air Monitoring (Single & Multi-gas, PID, etc.), Portable Ventilation, Rescue & Retrieval Equipment, etc. COST: $495/person. Certificate upon completion. First Responder Courses OSHA (q)(6) Training Training shall be based on the duties and function to be performed by each responder of an emergency response organization. The skill and knowledge levels required for all new responders, those hired after the effective date of this standard, shall be conveyed to them through training before they are permitted to take part in actual emergency operations on an incident. Employees who participate, or are expected to participate, in emergency response, shall be given training in accordance with the following paragraphs: I. First Responder Awareness Level (8 Hours). First responders at the awareness level are individuals who are likely to witness or discover a hazardous substance release and who have been trained to initiate an emergency response sequence by notifying the proper authorities of the release. They would take no further action beyond notifying the authorities of the release. First responders at the awareness level shall have sufficient training or have had sufficient experience to objectively demonstrate competency in the following areas (as specified in (q)(6)(i)). Certificate upon completion. COST: $95/person. Certificate upon completion. II. First Responder Operations Level (8 Hours). First responders at the operations level are individuals who respond to releases or potential releases of hazardous substances as part of the initial response to the site for the purpose of protecting nearby persons, property, or the environment from the effects of the release. They are trained to respond in a defensive fashion without actually trying to stop the release. Their function is to contain the release from a safe distance, keep it from spreading, and prevent exposures. First responders at the operational level shall have received at least eight hours of training or have had sufficient experience to objectively demonstrate competency in the following areas (as specified in (q)(6)(ii)): in addition to those listed for the awareness level and the employer shall so certify. Certificate upon completion. COST: $95/person. Certificate upon completion. 14 Call Dephanie McGill ( ) for more information.

15 HAZWOPER First Responder Courses (continued) III. IV. Hazardous Materials Technician (24 Hours). Hazardous materials technicians are individuals who respond to releases or potential releases for the purpose of stopping the release. They assume a more aggressive role than a first responder at the operations level in that they will approach the point of release in order to plug, patch or otherwise stop the release of a hazardous substance. Hazardous Materials Technicians shall have received at least 24 hours of training equal to the First Responder Operations Level and in addition have competency in the following areas (as specified in (q)(6)(iii)): and the employer shall so certify. Certificate upon completion. Hands-On Respiratory Equipment; Clothing Ensembles; Foot, Face & Hand; Air Monitoring, Portable Ventilation; Rescue & Retrieval Equipment; etc. COST: $295/person. Certificate upon completion. Hazardous Materials Specialist (24 Hours). Hazardous materials specialists are individuals who respond with and provide support to hazardous materials technicians. Their duties parallel those of the Hazardous Materials Technician, however, those duties require a more directed or specific knowledge of the various substances they may be called upon to contain. The Hazardous Materials specialist would also act as the site liaison with Federal, state, local and other government authorities in regards to site activities. Hazardous Materials Specialists shall have received at least 24 hours of training equal to the technician level and in addition have competency in the following areas (as specified in (q)(6)(iv)): and the employer shall so certify. Certificate upon completion. Hands-On Respiratory Equipment, Clothing Ensembles; Foot, Face & Hand; Air Monitoring; Portable Ventilation; Rescue & Retrieval Equipment; etc. COST: $295/person. Certificate upon completion. HAZWOPER Refresher Training Course (8 Hours) Those employees who are trained in accordance with paragraph (q)(6) of this section shall receive annual refresher training of sufficient content and duration to maintain their competencies, or shall demonstrate competency in those areas at least yearly. HAZWOPER Regulations; Safety & Health Plans; Hazardous Chemicals; Safety Hazards; Air Monitoring; Medical Surveillance; Site Control; Decontamination; PPE Equipment and Respiratory Equipment. Certificate and wallet card upon completion. Hands-On Respiratory Equipment, Clothing Ensembles (foot, face & hand); Air Monitoring; Portable Ventilation; Rescue & Retrieval Equipment; etc. NOTE: Supervised field experience (also required by OSHA) under a trained, experienced supervisor is the responsibility of the student s employer. COST: $95/person. Certificate upon completion. 15

16 OSHA OUTREACH Ask how we can CUSTOMIZE your training program(s)! OSHA Outreach Training Programs Course materials may be customized for specific audiences (fall protection, gas detection, ventilation, PPE, etc.). Certificate and Department of Labor completion cards will be given to students upon completion. GENERAL INDUSTRY OSHA 10-Hour Safety & Health for General Industry Training Program Learning Objectives: This course is ideal for supervisors with safety and health responsibilities, and for employee safety and health awareness. Students will be introduced to OSHA policies, procedures and standards as well as general industry safety and health principles covered in OSHA Act Part Special emphasis will be placed on areas most hazardous using OSHA standards as a guide. Certificate and Department of Labor completion card provided. Hands-On Activities Include: Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $95/person. Certificate upon completion. OSHA 30-Hour Safety & Health for General Industry Training Program Learning Objectives: This course offers an expanded view of OSHA standards for General Industry. It is recommended for managers, supervisors or others who need a more detailed understanding of OSHA standards. Emphasis is placed on topics related to the most frequently cited OSHA violations. Students will be introduced to OSHA policies, procedures, and standards as well as general industry safety and health principles covered by OSHA Act Part Participants will research OSHA standards and other information. Certificate and Department of Labor completion card provided. Hands-On Activities Include:Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $240/person. Certificate and Department of Labor card upon completion. CONSTRUCTION INDUSTRY OSHA 10-Hour Safety & Health for Construction Training Program Learning Objectives: This course is designed for construction workers, foreman, job supervisors and anyone involved in the construction industry. OSHA recommends the 10- hour construction outreach training program as an orientation to occupational safety and health for workers covered by OSHA 29 CFR This program is intended to provide a variety of construction safety and health training with emphasis on hazard identification. Certificate and Department of Labor completion card provided. Hands-On Activities Include: Fall Protection, Respiratory, and Gas Detection Equipment and foot, face and hand protection. COST: $95/person. Certificate and Department of Labor card upon completion. OSHA 30-Hour Safety & Health for Construction Training Program Learning Objectives: OSHA recommends the 30-Hour Construction Outreach Training Program as an orientation to occupational safety and health for workers covered by OSHA 29 CFR It is a comprehensive safety program designed for safety directors, foreman, and field supervisors or anyone involved in the construction industry. This course offers an expanded view of OSHA standards for the Construction Industry. Emphasis is placed on topics related to the most frequently cited OSHA violations. Certificate and Department of Labor completion card provided. Hands-On Activities Include: Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $240/person. Certificate and Department of Labor card upon completion. 16 Call Dephanie McGill ( ) for more information.

17 OSHA OUTREACH MARITIME INDUSTRY OSHA 10-Hour Maritime Industry Training Programs 3 Courses Available: 29 CFR Part 1915 Occupational Safety and Health Standards for Shipyard Employment, 10 Hours 29 CFR Part 1917 Marine Terminals, 10 Hours 29 CFR Part 1918 Safety and Health Regulations for Longshoring, 10 Hours Learning Objectives: This training program is intended to provide entry level Maritime Industry workers information about how to abate, avoid and prevent job related hazards on a job site. The training is tailored to the type of work involved and will emphasize hazard identification, avoidance, control and prevention. Certificate and Department of Labor completion card provided. Hands-On Activities Include: Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $95/person. OSHA 30-Hour Maritime Industry Training Programs 3 Courses Available: 29 CFR Part 1915 Occupational Safety and Health Standards for Shipyard Employment, 30 Hours 29 CFR Part 1917 Marine Terminals, 30 Hours 29 CFR Part 1918 Safety and Health Regulations for Longshoring, 30 Hours Learning Objectives: The 30-Hour Maritime Industry Outreach Training Programs are intended to provide a variety of training to workers with some Safety responsibility. The training is tailored to the type of work involved and will emphasize hazard identification, avoidance, control and prevention. Certificate and Department of Labor completion card provided. Hands-On Activities Include: Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $240/person. Certificate and Department of Labor card upon completion. Occupational Safety and Health Standards for the Maritime Industry (35 Hours) Learning Objectives: Occupational Safety and Health Standards for the Maritime Industry is designed for all people working in the Maritime Industry who want to learn more about workplace safety and health recognition. Special emphasis is placed on areas in the Maritime Industry that are the most hazardous, using the OSHA 29 CFR 1915 (Shipyard Employment), 1917 (Marine Terminals), and 1918 (Longshoring) Standards as a resource. Upon completion of this course, participants will be able to define Maritime terms found in the OSHA Maritime Standards, identify hazards that occur in the Maritime Industry, determine appropriate standards, locate OSHA Maritime Safety and Health Standards, policies and procedures, and describe the use of the OSHA Maritime Standards and Regulations to supplement an ongoing safety and health program. Certificate upon completion. Hands-On Activities Include: Fall Protection, Respiratory, Rescue & Retrieval and Gas Detection Equipment and foot, face and hand protection. COST: $280/person. Certificate upon completion. 17

18 Facility Site Evaluation & Equipment Inspection Program Represents an onsite inspection process conducted by our Occupational Safety & Health Compliance Specialist. Current OSHA regulations, ANSI Standards and manufacturer s recommendations are used to provide a detailed analysis of your facility for compliance issues. Our Facility Site Evaluation audit includes an onsite visit to your facility for the purpose of identifying possible OSHA compliance issues, and circumstances which may be hazardous to your company s employees. A written analysis of our findings along with recommendations will be provided. Includes Hazard Survey Reports at no additional charge. COST: Call for details and price. SPECIALIZED Actual Site Evaluation Ask how we can CUSTOMIZE your training program(s)! Site Evaluation Facility Site Evaluation: During our Facility Site-Evaluation, we would be looking for compliance issues related to Manually Lever Operated Hoist, Overhead Chain & Wire Rope Hoist (Underhung), Hand Chain-Operated Chain Hoist, Fall Protection Equipment and Applications, Forklifts, Material Handling Equipment, (wire rope, chain & web slings, etc.), Hazard Communication (GHS labeling, open containers, etc.), Portable Fiberglass, Metal & Wood Ladders, Ladder Stands & Fixed Ladders, Stairs, Walking/Working Surfaces (floor holes & openings, leading edges, ladder way floor openings, rooftops, etc.), Permit-Required Confined Spaces (signage, etc.), Welding Equipment, Cylinder Storage,Flammable and Combustible Liquid Storage, Stumbling, Falling and Tripping Hazards, Machine Guarding, Frame, Tube & Coupler & System Type Scaffolding Systems, First Aid Kits, Eyewash Stations, Machine Guarding, etc. Equipment Inspection Process: Optional Proof-Tests with Documentation on Fall Protection Anchors to verify OSHA/ANSI requirements and anchor performance criteria. Call for details. 18 Call Dephanie McGill ( ) for more information.

19 294;6;6N!C9-N940I!!! 5-$$;6<A;$$8(!1S!!'))+T! Response from the Field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ear Ms. McGill, GKN Aerospace Magazine I am happy to provide a recommendation for David Cook s OSHA Outreach Training Programs. David is very well versed in the technical and legal aspects of the subjects that we have received training on, including Fall Protection, Aerial Lifts, Ladders and Walking/Working Surfaces and Permit-Required Confined Space Training. I was especially impressed that David took the time to come onsite prior to the classes to review our applications and take photographs, so that the training was tailored to our site. Additionally, I feel that our employees were engaged during the classes and were able to see specifically where the training applied to their job tasks. Sincerely, Michele Hammon Health & Safety Engineer GKN Aerospace St. Louis David Cook is an Occupational Safety & Health Compliance Specialist and an OSHA Authorized Instructor with 30 years of experience in the Construction, Maritime and General Industries. David is also a staff instructor at the Midwest OSHA Education Center (St. Louis University). He has an engineering degree specializing in metallurgy, metallography, ultrasonics and radiography as well as being a 3M DBI SALA Competent Person Trainer / EM385, and certified welding inspector (AWSCWI). He is also an authorized First Aid, CPR and AED trainer certified by the American Red Cross. With years in the safety industry and six years in the US Navy, David has created a niche that covers a broad spectrum of health and safety requirements. Being a part of the Wise Safety team gives him additional perspective, having gained certifications from many safety manufacturers on their specific equipment. With branches across the country, Wise Safety is able to provide solutions to help bring any company into OSHA compliance with a safer workplace. 19

20 Extensive Product Lines Protecting Your Most Valuable Assets Your Employees Personal Protection Equipment Wise Safety s Complete Product Line: Fall Protection Abatement & Environmental Haz Mat Instruments Use our corporate website or have us create a custom site for your people and the products you use. Call for More Information: Full-Line Safety Catalog Contractor s Mini-Catalog Instrument Mini-Catalog Abatement Instrument Rentals Service Department St. Louis Wise St. Louis Reis/OHA Boston Denver Houston Jacksonville Kansas City Little Rock Louisville Salt Lake City