Universal grips. Flaming slabs
|
|
- Jayson Washington
- 5 years ago
- Views:
Transcription
1 Devices for flaming
2
3 3 Universal grips - LEM LEM/S grip The LEM/S universal grip is compatible with HB, MPS, MPT, SECUR/2000 and RF/2000 lances. LEM/S grip M0007 LENGTH WEIGHT M mm 0,5 kg Flaming slabs - Flaming slabs SECUR/2000 The SECUR/2000 line was designed to flame slabs or flat surfaces; the slabs can be positioned both vertically or horizontally.
4 4 SECUR/2000 LANCE M0066 SECUR/ mm COMBS M0066H SECUR/ mm COMBS M0066I SECUR/ mm COMBS M0066F SMG/PM 6 MIXER M0043A IRON WHEEL Ø 60 mm C0194A STAINLESS STEEL NOZZLE M0068 SUPPLEMENTARY COOLER M0067 SECUR/2000 LANCE M0066 SECUR/ mm COMBS 4,7 Nm³/h 0,8 Nm³/h M0066H SECUR/ mm COMBS 7,35 Nm³/h 1,3 Nm³/h M0066I SECUR/ mm COMBS 9,4 Nm³/h 1,4 Nm³/h M0066F RF/2000 The RF/2000 line was designed for flaming slabs or flat surfaces of also less than 30 mm, thanks to a stone and comb spraying system built into the lance; the slabs can be positioned both vertically or horizontally. RF/ mm LANCE M0017B RF/ mm LANCE M0018E
5 5 H2O SPRAYING SYSTEM M0045 SMG/PM 6 MIXER M0043A RF/ mm COMBS M0037H RF/ mm COMBS M0037G IRON WHEEL Ø 60 mm C0194A COPPER NOZZLE M0043C STAINLESS STEEL NOZZLE M0068 RF/ mm LANCE 9,2 Nm³/h 1,8 Nm³/h M0017B RF/ mm LANCE 11,25 Nm³/h 2 Nm³/h M0018E CFP The CFP manual flaming torch is for flaming stone slabs. CFP M0031 BSP RING NUT C0358 BS/P2-4 MIXER M0043 NOZZLE TYPE BS/P2 SINGLE-FLAME 9,6 Nm³/h 2 Nm³/h M0042 BS/P3 SINGLE-FLAME 8,85 Nm³/h 2,1 Nm³/h M0041A BS/P4 SINGLE-FLAME 9,8 Nm³/h 1,9 Nm³/h M0041 FDT/3-4 SINGLE-FLAME 4 bar 9 Nm³/h 1,9 Nm³/h M0031C
6 6 NOZZLE TYPE BST/T4 MULTI-FLAME 4 bar 13 Nm³/h 1 bar 2,9 Nm³/h M0031AC BS/L MULTI-FLAME 16,9 Nm³/h 3,9 Nm³/h M0031EA Flaming edge - MPT MPT The MPT lances, with the LEM/S (M0007) universal grip, are used to flame edges; they are single-flame lances. LANCE MPT N.3 M0061A MPT N.4 M0062 MPT N.5 M0063 MPT 500 TIP M0065E MPT 800 TIP M0065F MPT 1250 TIP M0065G LENGTH WEIGHT M0061A 1,2 Nm³/h 0,3 Nm³/h 230 mm 0,19 kg M0062 1,4 Nm³/h 0,3 Nm³/h 275 mm 0,21 kg M0063 1,9 Nm³/h 0,3 Nm³/h 315 mm 0,22 kg
7 7 - MPS MPS The MPS lances, with the LEM/S (M0007) universal grip, are used to flame edges; they are star-pattern lances. LACNE MPS M0062A MPS TIP M0062B LENGTH WEIGHT M0062A 1,1 Nm³/h 0,3 Nm³/h 265 mm 0,250 kg - HB HB The HB lances, with the LEM/S (M0007) universal grip, are used to flame curved surfaces or edges; they are single-flame lances. LANCE HB/10 C3020 HB/20 C3021 HB/30 C3022
8 8 HB/10 TIP C3030 HB/20 TIP C3031 HB/30 TIP C3032 LENGTH WEIGHT C3020 3,2 Nm³/h 0,8 Nm³/h 515 mm 0,55 kg C3021 4,9 Nm³/h 1,2 Nm³/h 540 mm 0,6 kg C3022 6,8 Nm³/h 1,8 Nm³/h 565 mm 0,65 kg - TORO TORO The TORO combs are used with the LEM/S universal grip (M0007) and SECUR/2000 lance (M0066) to flame bull-nose edges up to 30 mm thick. TORO combs M0084 TORO nozzle M0043C TORO combs 8,4 Nm³/h 1,3 Nm³/h M0084
9 9 Cylinder pressure regulators type Oxygen tank pressure regulator Tank battery pressure reducer suitable for the decompression of gases used in automatic flaming processes. SI22,81x1,814 'B' C7315 G3/4" 'A' C7316 G5/8" BS 'B' C7317 W21,7x1/14" 'A' C7340 Q max. P1 max. P2 max. OUTLET CONNECTION WEIGHT C Nm³/h 200 bar 1 SI22,81x1,814 'B' 4,0 kg C Nm³/h 200 bar 1 G3/4" 'A' 4,0 kg C Nm³/h 200 bar 1 G5/8" BS 'B' 4,0 kg C Nm³/h 200 bar 1 W21,7x1/14" 'A' 4,0 kg 451-type Propane tank pressure regulator Tank pressure reducer suitable for the decompression of gases used in automatic flaming processes.
10 10 W20x1/14" LH 'A' C7380 SI21,7x1,814 LH 'A' C7385 W21,8X1/14" LH 'A' C7386 G5/8" LH 'B' BS C7387 Q max. P1 max. P2 max. OUTLET CONNECTION WEIGHT C Nm³/h 15 bar W20x1/14" LH 'A' 4,0 kg C Nm³/h 15 bar SI21,7x1,814 LH 'A' 4,0 kg C Nm³/h 15 bar W21,8X1/14" LH 'A' 4,0 kg C Nm³/h 15 bar G5/8" LH 'B' BS 4,0 kg - JUNIOR JUNIOR Oxygen tank pressure regulator Tank pressure reducer suitable for the decompression of gases used in slab and edge automatic flaming processes. W21,7x1/14" 'A' C7010JU G 3/4" 'A' C7025JU SI22,91x1,814 'B' C7094JU G 5/8" 'B' C7095JU Q max. P1 max. P2 max. OUTLET CONNECTION WEIGHT C7010JU 60 Nm³/h 200 bar 1 W21,7x1/14" 'A' 1,5 kg C7025JU 60 Nm³/h 200 bar 1 G 3/4" 'A' 1,5 kg C7094JU 60 Nm³/h 200 bar 1 SI22,91x1,814 'B' 1,5 kg C7095JU 60 Nm³/h 200 bar 1 G 5/8" 'B' 1,5 kg
11 JUNIOR Propane tank pressure regulator 11 Tank pressure reducer suitable for the decompression of gases used in slab and edge automatic flaming processes. W20x1/14" LH 'A' C7250PR W21,8x1/14" LH 'A' C7251PR SI21,7x1,814 LH 'A' C7253PR G 5/8" LH 'B' BS C7254PR Q max. P1 max. P2 max. OUTLET CONNECTION WEIGHT C7250PR 20 Nm³/h 15 bar W20x1/14" LH 'A' 1,5 kg C7251PR 20 Nm³/h 15 bar W21,8x1/14" LH 'A' 1,5 kg C7253PR 20 Nm³/h 15 bar SI21,7x1,814 LH 'A' 1,5 kg C7254PR 20 Nm³/h 15 bar G 5/8" LH 'B' BS 1,5 kg - Accessories Rubber hose Rubber hose for oxygen and propane. COLOR INTERNAL Ø OUTER Ø BLUE Ø8 mm Ø15 mm C0238TUB ORANGE Ø8 mm Ø15 mm C0241TUB
12 12 COLOR INTERNAL Ø OUTER Ø BENDING RADIUS P max. C0238TUB BLUE Ø8 mm Ø15 mm 65 mm 20 bar C0241TUB ORANGE Ø8 mm Ø15 mm 65 mm 20 bar Gas tank trolley Trolley with solid rubber wheels for transporting two 40 L gas tanks. TROLLEY C0075CAR Safety valves - Nesplon/6 Nesplon 6/I Nesplon 6/I valves are designed to keep the end utilities of industrial gas lines safe; they re fitted with flame arrestors and gas check valves. OUTLET CONNECTION FUELS G3/8" F L VI6G08 COMBURENTS G3/8" F R VI6O08
13 13 Q max. P max. OUTLET CONNECTION VI6G08 FUELS 45 Nm³/h 4 bar G3/8" F L VI6O08 COMBURENTS 67 Nm³/h 10 bar G3/8" F R - Nesplon/7 Nesplon 7 Nesplon 7 valves are designed to keep the end utilities of industrial gas lines safe; they re fitted with flame arrestors and gas check valves. OUTLET CONNECTION FUELS G3/8" F L G3/8" M L VN7G COMBURENTS G3/8" F R G3/8" M R VN7O Q max. P max. OUTLET CONNECTION VN7G FUELS 49,5 Nm³/h 4 bar G3/8" F L G3/8" M L VN7O COMBURENTS 76,5 Nm³/h 10 bar G3/8" F R G3/8" M R
14 14 - Nesplon/15 Nesplon 15 Nesplon 15 valves are designed to keep the end utilities of industrial gas lines safe; they re fitted with flame arrestors and gas check valves. OUTLET CONNECTION USE G3/8" F L G3/8" M L FUELS TORCH VN15G1 G3/8" F R G3/8" M R COMBURENTS TORCH VN15O1 Q max. P max. OUTLET CONNECTION VN15G1 FUELS 149 Nm³/h 4 bar G3/8" F L G3/8" M L VN15O1 COMBURENTS 196 Nm³/h 10 bar G3/8" F R G3/8" M R Automatic flaming - Control unit AIR TECNO control unit - ATEX The gas regulator and decompression control unit is installed near the flaming machine. AIR TECNO CONTROL UNIT M0080
15 15 CONTROL UNIT FILTER - O2 M0002 CONTROL UNIT FILTER - C3H8 M002A CONTROL UNIT FILTER - H2O M002B REDUCER O2 C7339 REDUCER C3H8 C bar PRESSURE GAUGE HM bar PRESSURE GAUGE HM bar PRESSURE GAUGE HM061 AIR PRESSURE OPERATED VALVE C0670 P1 max. P2 P1 max. P2 30 bar 2-4 bar 0,5 - AIR TECNO electronic control box The AIR TECNO electronic control box controls the air pressure operated valves in the "AIR TECNO control unit" to automate the ignition and shutdown process of automatic flaming combs or torches used in the automatic flaming sector. AIR TECNO ELECTRONIC CONTROL BOX M0093
16 16 - Flaming torches BS/86 torch The BS/86 automatic flaming torch is designed for the automatic flaming of slabs or flat surfaces; the welding torch has a built-in trident water-cooling system to cool the head and stone. BS/86 AUTOMATIC FLAMING TORCH + BS/P4 M0006 BS/86 AUTOMATIC FLAMING TORCH M0006N WATER TRIDENT M0044 PILOT FLAME M0050 BSP RING NUT C0358 NESPLON 6 PILOT VI6GM3/8FP LENGTH WEIGHT M ,9 Nm³/h 3,1 Nm³/h 780 mm 6,6 kg 710 mm 6,6 kg M0006N LITTLE/F torch The LITTLE/F automatic flaming torch is designed for the automatic flaming of slabs or flat surfaces; the welding torch has a built-in trident cooling system to cool the head and stone.
17 17 LITTLE/F AUTOMATIC FLAMING + BS/P4 M0038 LITTLE/F AUTOMATIC FLAMING M0038N WATER TRIDENT M0044 PILOT FLAME M0050 BSP RING NUT C0358 NESPLON 6 PILOT VI6GM3/8FP LENGTH WEIGHT M Nm³/h 2,2 Nm³/h 660 mm 4,6 kg 600 mm 4,6 kg M0038N Stainless steel pilot flame shield and thermocouple probe Stainless steel shield to protect the pilot flame from external agents. STAINLESS STEEL PILOT FLAME SHIELD C0345PE THERMOCOUPLE PROBE M0005AB
18 18 - Automatic flaming nozzles Monobloc automatic flaming nozzles The monobloc automatic flaming nozzles are used in automatic flaming and can be installed on either the BS/86 torch or the LITTLE/F torch. NOZZLES BS/L M0031EA FDT/3-4 M0031C BS/T4 M0031AC NOZZLES BS/L FDT/3-4 BS/T4 TORCH BS/86 15,9 Nm³/h 2,5 Nm³/h LITTLE/F 14,9 Nm³/h 2,1 Nm³/h BS/86 5,4 Nm³/h 0,5 bar 1,2 Nm³/h LITTLE/F 5,4 Nm³/h 0,5 bar 1,2 Nm³/h BS/86 4 bar 14 Nm³/h 1 bar 2,1 Nm³/h LITTLE/F 4 bar 14,2 Nm³/h 1 bar 2,4 Nm³/h M0031EA M0031C M0031AC Automatic flaming nozzles The automatic flaming nozzles are used in automatic flaming and can be installed on either the BS/86 torch or the LITTLE/F torch. NOZZLES BS/P1 M0042A BS/P1,5 M0042B BS/P2 M0042 BS/P3 M0041A BS/P4 M0041
19 19 NOZZLES NOZZLES BS/P1 BS/P1,5 BS/P2 BS/P3 BS/P4 TORCH BS/86 1,2 Nm³/h 0,2 Nm³/h LITTLE/F 3 bar 1 Nm³/h 0,2 Nm³/h BS/86 1,3 Nm³/h 0,3 Nm³/h LITTLE/F 3 bar 1,4 Nm³/h 0,4 Nm³/h BS/86 11,3 Nm³/h 1,4 Nm³/h LITTLE/F 11,15 Nm³/h 2 Nm³/h BS/86 11,4 Nm³/h 1,9 Nm³/h LITTLE/F 11,6 Nm³/h 2,4 Nm³/h BS/86 13,9 Nm³/h 3,1 Nm³/h LITTLE/F 12 Nm³/h 2,2 Nm³/h M0042A M0042B M0042 M0041A M Combs for automatic flaming torches Combs for automatic flaming torches The combs for automatic flaming torches are used in automatic flaming; they can be installed on any machine to create a continuous 2 m flame line. COMBS PN150 PN250 NOZZLES COPPER M0037I STAINLESS STEEL M0037R COPPER M0037L STAINLESS STEEL M0037M COPPER NOZZLE M0043C STAINLESS STEEL NOZZLE M0068 BS/P2-4 MIXER M0043E
20 20 COMBS PN150 PN250 NOZZLES COPPER 10,7 Nm³/h 2,1 Nm³/h M0037I STAINLESS STEEL 10,85 Nm³/h 2 Nm³/h M0037R COPPER 14,3 Nm³/h 3,7 Nm³/h M0037L STAINLESS STEEL 14,2 Nm³/h 3,6 Nm³/h M0037M
Geräte zum Schweißen, Schneiden und Erhitzen
Geräte zum Schweißen, Schneiden und Erhitzen 3 Zylinderdruckregler - 451 451-type cylinder pressure regulator Cylinder pressure regulator with two pressure gauges used on cylinder outlets to reduce the
More informationVisit our Web site: http: //
CONTENTS: Medium Duty Victor Style Welding And Cutting Outfit MANUFACTURED BY AN ISO 9001 REGISTERED FIRM Visit our Web site: http: // www.northerntool.com TABLE OF CONTENTS Page INTRODUCTION... 1 SECTION
More informationPRESSURE CONTROL REGULATORS
REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities
More informationREGULATORS AND FLOWMETERS
REGULATORS AND FLOWMETERS SINGLE STAGE RC RANGE BROMSI Gas cylinders are available in many different shapes and sizes, with different valve connections - either vertical or horizontal. To suit this, Tesuco's
More informationOXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS
OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS Items needed for demonstrations: Fire extinguisher PPE (Personal Protective Equipment): o Lab coats/welding jackets o Leather gloves
More informationMINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH
MINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH The MINITHERM torch range has been developed to meet the need of trade and industry for a small injector torch to handle special jobs. A large number
More informationChiyoda's High-Pressure Gas Control System and Equipment
Chiyoda's High-Pressure Gas Control System and Equipment 2012 CHIYODA HELPS YOUR GAS RELATED JOBS... Since the establishment 1946, we started as a manufacturer of Gas Welding & Cutting Equipment. Nowadays
More informationR133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
More informationSpecifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA
WELDING, BRAZING AND CUTTING KITS Tesuco offers a range of oxygen / acetylene and oxygen / LPG kits to suit the industries they are designed for. This includes complete cutting and welding kits and kits
More informationProduct Catalogue 2018
Product Catalogue 2018 Oxy-fuel Cutting and Welding Technology Mechanische Werkstätten Wurzen GmbH Oxy-fuel Cutting and Welding Technology Mould and Tool Production Oxy-fuel Cutting and Welding Technology
More informationNEW Edge Series Products: OUTFITS and REGULATORS
NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com
More informationR300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
More informationAir-Propane Equipment QUALITY GAS EQUIPMENT.
Air-Propane Equipment QUALITY GAS EQUIPMENT www.tesuco.com.au Combination Chart SNT1000 SNT600 M20 x 1 SNT220 SSB80-SPX SNT75 M20 x 1 SNTBSB7 SNTBSB5 SNTBSB3 SSB80 SBM2B SNTBT28M SNTBT22M M14 x 1 SNTBT18M
More informationWELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Hoses / Automatic roller for oxygas hoses.............................................. 89 Quick action coupling.................................................................
More informationCENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES
P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through
More informationOXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT
OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT Introduction: The oxy-acetylene torch can be used for various tasks. It can be used for cutting steel, welding steel, brazing and for heating metal. The oxy-acetylene
More informationMastar Outfits KL550-TR KL550-4P-T
Ranked #1 for Commercial Refrigeration Technicians Mastar Highly rated by commercial refrigeration technicians, Mastar outfits contain all the necessary top of the line components for welding, cutting
More informationGas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
More informationBRAZING EQUIPMENT PORTAPAK KIT
BRAZING EQUIPMENT PORTAPAK KIT Portapak Trolley Single Stage 2 Gauge Acetylene Regulator Single Stage 2 Gauge Oxygen Regulator Acetylene Flashback Arrestor Oxygen Flashback Arrestor 5 Meter Oxy / Acetylene
More informationSafe Work Instructions For Oxygen Acetylene Equipment
Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018
More informationSpectrotec. Pressure regulators for acetylene
spectro tec Spectrotec Pressure regulators Regulator BT61 ca. 166 1/8"-NPT 83 113 48 1/4"-NPT 60 1/4"-NPT 33 105 Pressure regulator BT61 AC Specially For flow rates up to 8 m³/h acetylene Pressure regulator
More informationLP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957
LP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957 Enerco, based in Cleveland Ohio, has been at the forefront of infrared technology since 1957. This market leading technology has allowed Enerco to build
More informationWescol WESCOL LIMITED
Introduction Limited offer a comprehensive range of industrial gas control equipment, providing solutions for cutting, welding, heating and gas distribution. One of only two manufacturers of such product
More informationCutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA
Smith Equipment American Classic Heavy Duty, Welding & Outfits Cuts up to 8"- Welds up to /2" These premium heavy duty outfits feature Smith s proven in-tip gas mixing technology and include torch mount
More informationBRAZING & CUTTING. Kits Easy To Use
BRAZING & CUTTING Kits Easy To Use Easy to use kits fully or partly (equipped with quick connections) assembled kits for brazing (kits no. 1 and no. 2) or cutting (kits no. 3 and no. 4). HIGH QUALITY PRODUCED
More informationEXOTHERMIC TORCH ADAPTER. Instruction Manual
EXOTHERMIC TORCH ADAPTER Instruction Manual CAUTION FLAME TECH ALWAYS RECOMMENDS USING FLASH BACK ARRESTORS (must purchase separately) Pre-operation Checklist Before you begin, the following routine checks
More informationGas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT.
For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT www.tesuco.com.au Introduction Beginning in 1988, Tesuco has established itself as a specialist equipment supplier for all gas welding, heating
More informationHow Flashback Arrestors Work
What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors
More informationConnection solutions for the gas industry Date: 04/2013
Catalogue 20 WEH Connectors Pressure-tight connections in seconds for gaseous applications Connection solutions for the gas industry Date: 04/2013 WEH - We Engineer Hightech All rights reserved, WEH GmbH
More informationCutting and shaping materials using thermal cutting equipment
Unit 824 Cutting and shaping materials using thermal cutting equipment UAN: H/600/5883 Level: Level 2 Credit value: 14 GLH: 64 Relationship to NOS: This unit has been derived from national occupational
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationMONOPLACE HYPERBARIC CHAMBER FOR DIVERS TRANSPORT MODEL OXICAB MO-BZ-TR TECHNICAL OFFER
TECHNICAL OFFER MONOPLACE HYPERBARIC CHAMBER FOR DIVERS TRANSPORT Supplied by HYPERBARIC S.A.C. LIMA - PERÚ hyperbaric@hyperbaricsac.com ***The images and illustration included are in some cases for reference.
More informationScanFoam. Cleaning Equipment ApS. w w w. s c a n f o a m. c o m
ScanFoam Cleaning Equipment ApS w w w. s c a n f o a m. c o m Units List of Equipment 2015-06A ScanFoam ApS Skanderborg Denmark Phone: +45 86 57 25 99 Fax: +45 86 57 20 86 E-mail: anders.christensen@scanfoam.com
More informationWilkins Safety Group
Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes
More informationProcess gas requirements (Core, VWI, and OptiMix gas connect consoles)
Process gas requirements (Core, VWI, and OptiMix gas connect consoles) You must supply the process gases and supply gas plumbing for your cutting system. See Table 7 on page 46 for supply gas quality,
More informationflashback arrestors Regulator end
flashback arrestors Regulator end Regulator end flashback arrestors are safety devices fitted to the outlet of a regulator. They incorporate a number of features designed to protect upstream equipment
More informationGenuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment.
Gas Kits These kits contain CIGWELD s renowned COMET Regulators, Blowpipe and Cutting Attachment. COMET Custom Kit COMET Regulators Independently certified to AS4267 (COMET TM 700 & 500 Oxygen & Acetylene
More informationGas Equipment from ESAB
Gas Equipment from ESAB A full line of gas equipment solutions for every application, industry, and environment. Gas Equipment ESAB's premium blend of time tested design and modern innovation is the result
More informationTamper proof, self reseating internal safety
GAS EQUIPMENT REGULATORS GENERAL FEATURES Regulators: Harris regulators are designed and manufactured according to the most recent international standards: - ISO 2503 for cylinder pressure regulators for
More informationoxyacetylene welding/cutting torch set
instructions for oxyacetylene welding/cutting torch set model no: SGA2.V2 & SGA6.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationTRADE OF HEAVY VEHICLE MECHANIC
TRADE OF HEAVY VEHICLE MECHANIC PHASE 2 Module 1 Induction/Customer Care/Bench Fitting/Welding UNIT: 5 Table of Contents Aims and Objectives... 1 Learning Outcome:... 1 Setting up an Oxyacetylene torch...
More informationINSTRUCTION MANUAL. Thanks for purchasing our airbrush compressor and please read this
INSTRUCTION MANUAL AIRBRUSH COMPRESSOR AS-48A Thanks for purchasing our airbrush compressor and please read this Instruction Manual carefully and thoroughly before operating the tool to get best performance.
More informationModel 2851 CONSTANT FLOW REGULATOR
CONSTANT FLOW REGULATOR Model 2851 The model 2851 constant flow regulator is designed to provide constant flow of liquids or gases regardless of pressure variations. It is intended for low liquid flows
More informationGAS EQUIPMENT. regulators and products for gas cutting and welding, soldering and brazing.
GAS EQUIPMENT regulators and products for gas cutting and welding, soldering and brazing. GASIQ THE INTELLIGENT CHOICE IN GAS EQUIPMENT GasIQ is a smart choice for gas equipment when you are looking for
More informationNozzles and portable monitors
Nozzles and portable monitors Rosenbauer Nozzles and portable monitors Nozzles and portable monitors. EN maximum extinguishing effect. The Rosenbauer nozzle enables the manual 4-stage adjustment of the
More information1 Exam Prep. Tabs and Highlights
1 Exam Prep NFPA 14: Standard for the Installation of Standpipe and Hose Systems Tabs and s These 1 Exam Prep tabs are based on the NFPA 14: Standard for the Installation of Standpipe and Hose Systems,
More informationTypical Single Stage Design SR 450 Series Shown. Two stage regulators add the following in addition to the features listed above:
Single Stage : Recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) would not affect the performance characteristics of the work or test results.
More informationCUTTING AND WELDING TORCHES HANDLES
INSTRUCTIONS MANUAL GALA SOL, S.A. FABRICA DE APARATOS Y MAQUINAS DE SOLDADURA Y CORTE AUTOGENOS C/ ALBARRACIN 25-27 TFNO.: 976 513 055 FAX: 976 515 303 50015 ZARAGOZA e-mail: galasol@galasol.com GALA
More informationOXYGEN - ACETYLENE Cutting - Welding - Heating and Brazing Kit
GAS EQUIPMENT INDUSTRIAL CUTTING & WELDING SETS REGULATORS CUTTING EQUIPMENT WELDING - BRAZING - HEATING GAS CUTTING MACHINES AIR - PROPANE HEATING EQUIPMENT TORNADO REGULATORS HIGH PRESSURE REGULATORS
More informationINSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235)
P/N 126905-01 Rev. B 11/2016 INSTALLATION INSTRUCTIONS MANUAL ON/OFF SAFETY VALVE/PILOT KIT MODEL GA9050A-1 (F0235) For All Single, Dual and Triple Burner Natural and Propane/LP Gas Logs P126905-01 For
More informationSection 6. Gas Welding & Cutting
Section 6. Gas Welding & Cutting TronicFlame Gas Welding & Cutting Kits GCWKIT-AB1 GWKOA Welding & Cutting Kit-Oxy/Acet With FBA's 1 Ea. 9346277041966 GCWKIT-LB1 GWKOL Welding & Cutting Kit-Oxy/LPG With
More informationHoses and Lances 20,000 PSI
Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large
More informationList of Contents vma. Compressed Air Conditioning 2. System description 2. Individual Units Pre-Filters 3. Combinations 6
Úprava stlačeného vzduchu EWO VMA List of Contents System description Individual Units Pre-Filters 3 Micro-Filters 4 Activated-Charcoal-Filters 5 Combinations 6 Accessories and Main spare parts 6 Service
More informationWorking Environment Safety Assessment
For your own safety and/or safety of your workforce, and to improve the efficiency of your business practices, you should be aware of, and be up to date with, the key safety issues and good practices relevant
More informationSOFT SEAL PISTON VALVES
DV & VL SERIES VESSEL & REACTOR VALVES SOFT SEAL PISTON VALVES PROCESS VALVES SERIES DV, STANDARD RANGE Original Strahman Ram-Type Drain Valve FEATURES Quality System Registered to ISO 9001:2008 Certificate
More informationEquipment Specification MK73 FS Flame Spray System
Equipment Specification MK73 FS Flame Spray System TYPICAL SYSTEM CONFIGURATIONS Pictured below is a range of typical system configurations. Variations of these configurations may be possible. For some
More informationBRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England
BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England www.bcga.co.uk TECHNICAL INFORMATION SHEET 29 OXY-FUEL GAS EQUIPMENT
More informationZirconia Oxygen Sensors. Model 1230 Series
Zirconia Oxygen Sensors Model 1230 Series March 2003 USING THIS MANUAL CAUTION 1 The probe or sensor heater is supplied with mains voltage. This supply has electrical shock danger to maintenance personnel.
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationPilot HON 625. Entwurf. Product information. serving the gas industry worldwide
Pilot HON 62 Entwurf Product information serving the gas industry worldwide Pilot HON 62 Application, characteristics Application Pilot for the gas pressure regulator HON 02 Pilot for outlet pressure control
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationO NEof Premium tools for professionals!
O NEof 6.000 Premium tools for professionals! 1 System Overview 190 Testing of Water Lines & Containers Testing Pumps 191-193 Testing of Gas- & Water Lines Analogue Testing Device 194-195 Testing of Waste
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationOperating instructions Diaphragm pump MP-400. Dok-236-GB-6bar.doc Rev. 0 Article No: keep for further use-
Operating instructions Diaphragm pump MP-400 Dok-236-GB-6bar.doc Rev. 0 Article No: 200-0102 -keep for further use- CE Declaration of Conformity in acc. with Annex II A of the EC Machine Directive 98/37/EC
More informationHIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY)
HIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY) INDUSTRIAL GAS EQUIPMENT AND WELDING SOLUTIONS ABOUT US To Our Valued Customers, CHOICE Something we will all like to have but do not always get!
More informationOne Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT.
One Piece Cutting Torch Cuts 300 mm QUALITY GAS EQUIPMENT www.tesuco.com.au Cuts 300 mm Key Features Gas specific injector designed for maximum efficiency For cutting up to 300 mm and for gouging applications
More informationsafety Shut-Off Valve HON 721
safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety
More informationSEMFWE3-33 SQA Unit Code HF2X 04 Cutting and shaping materials using portable thermal cutting equipment
Cutting and shaping materials using portable thermal cutting equipment Overview This standard identifies the competencies you need for cutting and shaping plate (3mm thickness and above), rolled sections,
More informationUnderground irrigation
Prograers Turbines and Pop-ups Solenoid valves ittings Accessories and Hoses 70 Irrigation located in set areas, and the only time that you need to invest into it, is the time it takes to set it up, then
More informationBEST BUY. Cutting and Welding Torches GAS RANGE. UK Sales Export Sales
290 RANGE Cutting and Welding Torches BEST BUY Features Cuts to 10" (250mm) Solid brass and stainless steel construction Nozzle mix design for maximum safety Backfire resistant design Easy gri control
More informationTorches, Outfits & Accessories
150 SERIES OXY-ACETYLENE OUTFITS 0384-05 These user friendly outfits offer a complete system for smaller welding and cutting jobs. The 150 series is best suited for autobody repair, motor enthusiasts,
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationDescription. Lesson Outcomes. Assumptions. Terminology. Welding. Automotive
Description Oxyacetylene or fusion welding is one of the oldest methods of joining metal. Oxyacetylene welding equipment is very common in an automotive shop and has many uses. It is most often used to
More informationDifferential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
More informationTURBO SET 1000 E D $'9 5(9
TURBO SET 1000 Instructions for use and maintenance HOW TO GAS WELD WITH TURBO SET 1000 With gas welding always work methodically : before starting a weld ensure that the parent metal in the weld area
More informationCUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment
CUTTING TORCH SAFETY The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment Introduction Safe operation for the use of gas cutting, heating and welding requires a clear understanding
More informationfig.1 Instructions for: Gas welding/cutting kit
Instructions for: Gas welding/cutting kit MOdel No: SGA1.v3 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
More informationSafety Shut-Off Valve HON 720
Safety Shut-Off Valve HON 70 Product information serving the gas industry worldwide Application, Characteristics, Technical Data Application main safety device for gas pressure regulating stations suitable
More informationQUALIFIED EXPERIENCE AND CERTIFIED RELIABILITY
Pressure reducers QUALIFIED EXPERIENCE AND CERTIFIED RELIABILITY Oxyturbo has been operating since 1982 in the field of specialised technologies for the use of cylinder industrial gases, positioning itself
More informationA rising main is a system of pipe work and valves that enables water to be delivered for fire fighting purposes to all floors in buildings over 18
Rising mains A rising main is a system of pipe work and valves that enables water to be delivered for fire fighting purposes to all floors in buildings over 18 metres high. It consists of a vertical pipe
More informationGas Pressure Regulator HON 502
Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas
More informationHyDefinition HD3070. Automatic Gas Console Upgrade. Field Service Bulletin (P/N ) Revision 2 April, 2002
HyDefinition HD3070 Automatic Gas Console Upgrade Field Service Bulletin (P/N 803100) Revision April, 00 Hypertherm, Inc. Hanover, NH USA www.hypertherm.com Copyright 00 Hypertherm, Inc. All Rights Reserved
More informationColey Instruments. Burnside Industrial Estate, Kilsyth, Glasgow. G65 9JX. Tel: Fax:
Coley Instruments Burnside Industrial Estate, Kilsyth, Glasgow. G65 9JX. A Division of STEWART BUCHANAN GAUGES LTD Tel: 01236 821533. Fax: 01236 824090. Email: sales@ COLEY Instruments LONG ESTABLISHED
More informationTwo-Wire In Situ Oxygen Analyzer (550 to 1400 C)
Product Data Sheet PDS 106-581.A01 March, 2004 Model 5081FG Two-Wire In Situ Oxygen Analyzer (550 to 1400 C) Intrinsically safe: - CENELEC EEx ia IIC - Class I Div. I Gr. B, C, D (pending) Operates at
More informationFIREFIGHTING EQUIPMENT
FIREFIGHTING EQUIPMENT User Manual ANTENOR 3000 Base or portable Trailer DOC 1974 En Rev.B - 22/10/13 Tel : 03 25 39 84 78 - Fax : 03 25 39 84 90 - Email : france@pok.fr - Web : www.pok.fr Identification
More information490 Micro GC Site Preparation Checklist
Thank you for purchasing an Agilent instrument. To get you started and to assure a successful and timely installation, please refer to this specification or set of requirements. Correct site preparation
More information10.1 Main Unit. INDEPENDENT WHOLESALE WELDING SUPPLY Ph: Fax: Website:
10.1 Main Unit 10.1 Main Unit 1 Case 60031802 1 2 Cross feed holder 60031803 1 3 Cross feed liner 60031804 1 4 Handle 60031805 1 5 Fan cover 60031806 1 6 Bottom plate 60031807 1 7 Heat shield 60031808
More informationPreparing and using manual gas welding equipment
Unit 030 Preparing and using manual gas welding Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationASSEMBLY & OPERATIONS MANUAL. Straight & Clean Torch Cuts. Every Time.
ASSEMBLY & OPERATIONS MANUAL Straight & Clean Torch Cuts. Every Time. CAUTION ALWAYS USE FLASH BACK ARRESTORS (purchased separately) READ THIS BOOK THOROUGHLY AND FOLLOW INSTRUCTIONS! FAILURE TO USE OSHA
More informationGRUNDFOS alldos product information. Vaccuperm 111 / 113. Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide
GRUNDFOS alldos product information Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide Construction and function Modular system Vacuum regulator for direct mounting
More informationTechnical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with
More informationHot Compressed Air Lance Operation Manual. LAB Manufacturing 9483 Reading Road Cincinnati, OH (800)
Hot Compressed Air Lance Operation Manual www.heatlances.com LAB Manufacturing 9483 Reading Road Cincinnati, OH 45215 (800) 776-5830 PARTS CHECK LIST NOTE: Check all fittings & connections prior to operation.
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationHose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule
Hose Fittings Little Torch Hose Nuts Type Nut Thread & Number Hose ID Size 16173 Oxygen 9/16 in-18 RH 1/8 in (3 mm) 16174 Fuel Gas 9/16 in-18 LH 1/8 in (3 mm) 16174 1882 Little Torch Hose Tailpiece Type
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationTECHNICAL ACCESSORIES
A.R.I. VALVES S-050P AIR PLASTIC RELEASE 16 BAR Automatic Component A.R.I patent, Rolling Seal Mechanism: Dramatically reduces the possibility of obstruction by debris. Discharges high air flow rates upto
More informationPERMA-CYL 230/450/1000/1500/2000. Installation Manual Manual # Revision B
PERMA-CYL 230/450/1000/1500/2000 Installation Manual Manual #11630833 - Revision B TABLE OF CONTENTS SAFETY 3 THE PERMA-CYL FAMILY 4 CONDUCTING A SITE EVALUATION 5 OUTDOOR INSTALLATION EXTERNALLY SITED/GAS
More information