8XT TIG Range CHAPTER 3 TIG
|
|
- Kathryn Houston
- 5 years ago
- Views:
Transcription
1 8XT TIG Range CHAPTER 3 TIG
2 8XT TIG TORCHES THE CONCEPT ROTATABLE TORCH BODY The new 8XT TIG torch line from The 8XT torches can be rotated to 45 degrees Translas offers high comfort due to its both left and right to allow reach in difficult ultra-ergonomic design. The 8XT handle to access areas. The adapter at the front cap is packed with ergonomic features to assures the torch body remains fixed in any of provide the best comfort for the hand the three possible positions. of the welder and to eliminate any tension on the wrist and fingers. ERGONOMIC BUMP The nose cap has a unique ergonomic bump that lies perfectly on the curve between the thumb and index finger. The handle can be executed also with a flat cap if preferred. A B A Adapter fixating the torch body in any of C Vertically curved front cap with grip lines the three possible positions: straight; 45 for comfortable and stable pen grip right and 45 left. C B Switch system that keeps dirt and water D Single-screw quick and easy D away from the PCB. (dis)assembly of the whole handle.
3 8XT HANDLE The new 8XT TIG torch line from Translas offers high comfort due to its ultra-ergonomic handle design. 2K SOFT RUBBER GRIP 2K grip on the bottom cap, made of soft TPE rubber, give great stability while holding the torch in any positon. GENERAL During the design period we focused on the insights received by welders Based on that, we designed a torch it is a pleasure to work with. In the same time, it is flexible enough for our dealers due to its many switch options and private label possibilities. DESIGN The new design of the 8XT TIG handle is made together with the 8XM MIG series. Therefore both lines have similar features and are familiar in their use. PERFECT MACHINE CONTACT Unique gold-plated spring contacts inside the switch module ensure perfect connection with the welding machine.
4 8XT-20 TIG TORCH DC AMP, AC/DC AMP, DUTY CYCLE - 100% ITEM PART NUMBER DESCRIPTION PACK QTY - 8X XT-20 Tig torch 4mtr M12x X XT-20 Tig torch 4mtr 3/8 G 1-8X XT-20 Tig torch 4mtr 35-50mm² 1-8X XT-20 Tig torch 8mtr M12x1 1-8X XT-20 Tig torch 8mtr 3/8 G 1-8X XT-20 Tig torch 8mtr 35-50mm² 1 other connections available on request All rights reserved by Translas BV.
5 ITEM PART NUMBER DESCRIPTION PACK QTY Torch body standard Torch body flexible V33 Back cap short V35 Back cap medium V24 Back cap long N23 Collet 2,4mm 5 see Options and Wear parts for other collet p.234 s N28 Collet body 2,4mm 5 see Options and Wear parts for other collet bodies p V44 Gas lens 2,4mm 5 see Options and Wear parts for other gas lenses p N10 Ceramic cup 9,5mm Gr N60 Gas lens cup 9,5mm Gr see Options and Wear parts for other ceramics p W77 O-ring Heat shield X9900 8XT Handle complete with 1-button switch X9510 8XT Switch module 1-button complete 1 see 8XT Switch module options for other switch modules p Ball-and-socket joint with connection ring Leather sheating 23mm L=50cm Connection set (5-parts) for neoprene/leather 23mm 2 17 S Power/water cable 4mtr M12x1 1 S Power/water cable 4mtr 3/8 G 1 S Power/water cable 8mtr M12x1 1 S Power/water cable 8mtr 3/8 G Switch cable 4mtr (QuickConnect) Switch cable 8mtr (QuickConnect) Neoprene sheating 21mm p/mtr Insulation boot Locking clip (QuickConnect) Switch cable end without plug (QuickConnect) 1 See p.194 8XT Switch Cable Ends for switch cable ends with plugs All rights reserved by Translas BV.
Edition Subject to change without notice
Torches w ith first m eter leather hose. Prices w it hout leat her on request. Machine side separate connections w ith Tuchel plug. I n varation to the torches listed below, the torches can also be produced
More informationSquare Wave TIG 200 TIG WELDING MACHINE
Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore
More informationSOLAR POWERED AUTO-DARKENING WELDING HELMET
SOLAR POWERED AUTO-DARKENING WELDING HELMET OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informatione.do Gripper Safety requirements, technical features and assembly and integration instructions
e.do Gripper Safety requirements, technical features and assembly and integration instructions Requirements, technical features and instructions for safe installation and use of the e.do Gripper. CR00758190-en_00/2018.05
More informationBlue Demon TIG Torch OWNER S MANUAL
Blue Demon TIG Torch OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationReproduction. Not for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS Parts Manual for M1227E M1227EX M1529E
Parts Manual for 27" & 29" TWO STAGE INTERMEDIATE SNOWTHROWERS 2011 Model No. Description 1696001 M1227E 1696002 M1227EX 1696003 M1529E Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough,
More informationSpare parts list ( ) Spare parts list Puzzi 8/1 C *CUL
Spare parts list (5.970-773.0) Spare parts list Puzzi 8/1 C *CUL 10.02.2012 www.kaercher.com EN Table of contents Spare parts list Puzzi 8/1 C *CUL (5.970-773.0)... 6 10 Tank (0.164-775.0)... 7 20 Individual
More informationRG1200 Service and Repair Manual
Dive Rite RG 1200 Regulator Service and Repair Manual Page 1 Text and Photography by Pete Nawrocky Copyright ( ) 1999-2000, Lamartek, Inc., dba Dive Rite RG1200 Service and Repair Manual First Stage.........................................
More informationLIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)
LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
More informationPPE: Your Last Layer Of Protection. Leader s Guide. ERI Safety Videos
29 PPE: Your Last Layer Of Protection Leader s Guide ERI Safety Videos PPE: Your Last Layer Of Protection This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More information30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET MODEL NUMBERS RY30020B, RY30040B, RY30060B
30cc STRING TRIMMERS 30cc BRUSHCUTTERS REPAIR SHEET MODEL NUMBERS RY30020B, RY30040B, RY30060B 6 9 8 10 1 7 15 19 13 16 18 4 17 3 2 11 12 5 20 26 30 22 27 25 13 24 21 23 29 28 31 2 FIGURE A PARTS LIST
More informationGT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories
GT22 Trimmer/Brushcutter UT-26039 Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 UP00578 1 TOOL KIT 2 DG07819 1 /P STRAP 3
More informationReplacing the Reverse Osmosis ( RO ) Membranes
Replacing the Reverse Osmosis ( RO ) Membranes Changing your membranes is a relatively straightforward procedure that can be achieved by carefully following these instructions. During disassembly, water
More informationUnderwater Housing for Canon EOS M
Underwater Housing for Canon EOS M User Manual 1 Table of Contents 1. Introduction 2. Specifications 3. Function Controls 4. Set up Instructions 5. Use & Care of Housing 6. Service 7. Warranty 1. Introduction
More informationPro-Stringer Tennis Quick Start Stringing Instructions
For a full instructional video on how to string a tennis racket using Pro-Stringer visit http://www.tennisprostringer.com Section 1 - Setting up your Pro-Stringer 1. Unpack and layout the contents of the
More informationNew, lighter, more flexible... MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled. BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 501/501 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
More informationM7XT Parts List PARTS LIST. TAL 1504 (L) Rev. 2 MSA 2015 Prnt. Spec (I) Mat Doc
M7XT Parts List PARTS LIST TAL 1504 (L) Rev. 2 MSA 2015 Prnt. Spec. 10000005389(I) Mat. 10146000 Doc. 10146000 M7XT PARTS LIST FireHawk M7XT Carrier and Harness Assembly Replacement Kits...3 Exploded View...4
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationCutting & Welding Equipment. Cutting & Welding. Cutting and Welding. Amron International.
Equipment Cutting and Welding hydraulic power tools ndt equipment / video and lighting systems www.amronintl.com 760 208 6500 Amron International 205 Equipment Oxy-Arc Cutting Torch BR-22 The BR-22 is
More information7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike
7130 Lancer Rear Drive Magnetic Commercial Indoor Cycling Bike Owner s Manual Made in Taiwan INDEX IMPORTANT SAFETY INFORMATION... 1 EXPLODED DRAWING... 2 PARTS LIST... 3 ASSEMBLY INSTRUCTION... 4-9 USER
More information"HAND, WRIST AND FINGER SAFETY"
PRESENTER'S GUIDE "HAND, WRIST AND FINGER SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM
More informationAsk For Our Latest WELDCLASS PRODUCT CATALOUGE Listed Over 130 Pages Of Welding Products Here Is Just a Sample
TOOLS Welding 2018 SAFETY TOOL & WELDING Ask For Our Latest WELDCLASS PRODUCT CATALOUGE Listed Over 130 Pages Of Welding Products Here Is Just a Sample Earth Clamps TIG Ceramic Welding Curtains Teflon
More informationPowermax machine-side reference guide For mechanized applications with Powermax1000, Powermax1250 and Powermax1650
Powermax machine-side reference guide For mechanized applications with Powermax1000, Powermax1250 and Powermax1650 This Powermax machine-side reference guide is a supplement to your Operator Manual and
More informationIncluded with Smoothcut Plasma 100 machine. Plasma 100 Torch Operating manual
3 Included with Smoothcut Plasma 100 machine Plasma 100 Torch Operating manual 2 Important Notice This document has been prepared by BOC Limited ABN 9 000 029 29 ( BOC ), as operating instructions and
More informationUser Manual. MEGP 25 Electric Gripper. Document version: 1.1
User Manual MEGP 25 Electric Gripper Document version: 1.1 September 1, 2017 The information contained herein is the property of Mecademic Inc. and shall not be reproduced in whole or in part without prior
More informationWarnings: Notes: Revised: January 8,
OAI Model 204IR Mask Aligner Standard Operating Procedure Faculty Supervisor: Prof. Robert White, Mechanical Engineering (x72210) Safety Office: Peter Nowak x73246 (Just dial this directly on any campus
More informationDISCOVERY PRO - features
DISCOVERY PRO DECEMBER, 2010 DISCOVERY PRO - features The ultimate pipette for tough market reality To match leader s ergonomics and performance.ultra light weight and extremaly low pipetting forces Outstandingly
More informationSafety Huber Needles
Safety Huber Needles Huber needles are used to administer chemotherapy, antibiotics, and TPN through an implanted IV port. These needles may be left in the port for many days at a time. It can be difficult
More information3. Align ratchet drive with female insert on assembly, and raise ratchet handle until the ratchet drive is firmly seated into the assembly.
Remote Bung Cap Removal Tool Assembly Instructions 1. Pull collar down on ratchet to fully extend. 2. Insert ratchet head and neck under spring. 3. Align ratchet drive with female insert on assembly, and
More informationAutomatic Twin Greasing System
Parts Manual Automatic Twin Greasing System YOUR EFFICIENCY IS OUR CHALLENGE All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm or
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E933 ELECTRIC TOOL PARTS LIST SLIDE COMPOUND SAW Model 2004 2 13 (E2) 1 2 3 4 5 6 7 40 41 601 8 9 10 11 12 26 27 28 29 30 29 602 618 602 10 9 42 603 604 605 606 607 608 14 43 13
More informationLIST NO. E948 SLIDE COMPOUND SAW. Model C 8FSE (E1)
Model C FSE SLIDE COMPOUND SAW LIST E94 (E1) 42 A A 1 2 3 4 10 5 6 9 11 14 15 12 16 1 1 19 20 21 23 26 25 24 29 30 2 2 33 31 32 53 4 4 49 46 34 36 3 39 40 35 3 45 42 50 54 56 5 5 52 13 22 41 51 612 613
More informationi-mop XL * * Parts Manual North America / International (S/N ) SCRUBBER Rev. 02 ( )
i-mop XL SCRUBBER Parts Manual (S/N 300000- ) Model Part No.: 23845 - Machine w/battery & Charger, Blue Brushes 235203 - Machine w/battery & Charger, Red Brushes 906402 - Machine w/extra Battery & Charger,
More informationINSTRUCTIONS FOR MODEL BHD HEAVY DUTY BALANCER
INSTRUCTIONS FOR MODEL BHD HEAVY DUTY BALANCER Form 32048-EU Edition 4 December 1994 IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING BALANCER. IT IS THE RESPONSIBILITY OF THE EMPLOYER
More informationSpare Parts catalogue 2012
Spare Parts catalogue 2012 TriFlo Pump Number Description Part # Pump Model Quantity 1 Barrel Union Nut 9-2008 AH, XH, ET, ST, SK 2 2 Barrel Union Pipe Socket 9-2007 AH, XH, ET, ST, SK 2 3 O-ring Barrel
More informationGT21 String Trimmer UT Page 1 of 16 Accessories
GT21 String Trimmer UT-26038 Page 1 of 16 Accessories GT21 String Trimmer UT-26038 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More informationPlasma 40 Torch Operating manual
Plasma 40 Torch Operating manual 24799 Smoothcut Plasma 40 Torch OP Manual D4.indd 1 17/04/14 1:42 PM 2 BOC Smoothcut Plasma 40 Torch Operating manual Important Notice This document has been prepared by
More informationInstruction Manual Updated 5/26/2009 Ver. 2.0
Bench-Mount Filter Press With Air Cylinder Part No. 140-35 Instruction Manual Updated 5/26/2009 Ver. 2.0 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele: 832.320.7300
More informationOWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most
More informationInstallation Instructions MODEL VSTI-A020 Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Versa Steel Inc. Guide Cables No
Tank Indicator Installation Model: VSTI-A020, Stainless Reverse Read System Guide Cables No Guide Cables 1 August 4, 2011 Assembly Instructions: (Shown with a 2 board, 12 ft kit) ITEM NO. PART NUMBER DESCRIPTION
More informationPRODUCTCATALOGUE MIG/MAG TIG LASER MANUAL AUTOMATION
PRODUCTCATALOGUE 2017 MIG/MAG TIG LASER MANUAL AUTOMATION DINSE ESS YOUR STRONG PARTNER IN LIVE TO WELD. This is more than just some fancy slogan to us: Our staff of 200 have a true love of welding work
More informationParts List. Description. Additional Considerations. Installation Instructions. Dual/Elite Hydraulic Treadmill Kit (supplied by EPI)
Page 1 of 9 Parts List Dual/Elite Hydraulic Treadmill Kit (supplied by EPI) Qty Description Treadmill Body 1 Treadmill Power Unit (per Treadmill Body) 2 Treadmill Decks (per Treadmill Body) 1 Treadmill
More informationSUPPORTING THE ART OF PHOTOGRAPHY ORBIT TRIPOD
SUPPORTING THE ART OF PHOTOGRAPHY ORBIT TRIPOD ORBIT TRIPOD Thanks for choosing 3POD s Orbit tripod! The Orbit tripod is a full service photo and video tripod, featuring fully adjustable legs and shaft,
More informationplasmarc air curtain For use with m3 Plasma System and PT-36 Plasma Torch ESAB Assembly Number: Instruction Manual gas the bottom of the plate.
plasmarc air curtain For use with m3 Plasma System and PT-36 Plasma Torch ESAB Assembly Number: 37440 Instruction Manual WARNING The Air Curtain CAN NOT be used when using H-35 or CH 4 gas mixes. The water
More informationO P E R ATING INSTRUCTIONS FOR MODEL SPR-45 Automatic Screen and Stencil Printer
O P E R ATING INSTRUCTIONS FOR MODEL SPR-45 Automatic Screen and Stencil Printer TABLE OF CONTENTS I. SPECIFICATIONS...3. II. SAFETY INSTRUCTIONS...4. III. INSTALLATION...5. IV. SET-UP...6. V. SYSTEM OPERATION...9.
More informationMonoblock directional control valves ML - Directional control valve
Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow
More informationBR-2444 ROWING MACHINE
BR-2444 ROWING MACHINE Important Safety Information Please keep this manual in a safe place for reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe
More informationLectric Cycles Mid-Drive Electric Motor Installation
Lectric Cycles Mid-Drive Electric Motor Installation This write-up describes the installation of a Lectric Cycles electric motor. The model is the e-rad Mid-Drive 750 Watt conversion kit, installed on
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationWildcat LB Winch Kit. Operator s Manual Installation Instructions Replacement Parts List. With Wireless Control System.
p/n 2259-560 Wildcat 4000 LB Winch Kit With Wireless Control System Operator s Manual Installation Instructions Replacement Parts List 2012 Arctic Cat Inc. Trademarks of Arctic Cat Inc. Thief River Falls,
More informationSpare parts list ( ) Spare parts list HD 1090 WS *
Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...
More informationM3X Tactical Illuminator Operator s Manual MADE IN THE USA
M3X Tactical Illuminator Operator s Manual MADE IN THE USA TABLE OF CONTENTS SECTION Table of Contents Warnings/Cautions PAGE i ii General Information 1 Major Components 2 Repair / End Items 3 Major Components
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationOperating instruction for the quick-change tap holders type:
type: HF 20 HF 30 Date of edition: 15.07.2008 Stage of alteration: 4 Please keep this for future use! Contents: 1 Application range, safety instructions and technical data... 3 1.1 Application range,
More informationHydraulic Punch Drivers
SERVICE MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex Quick Draw Hydraulic Punch Drivers Serial Codes AHJ and YZ Read and understand all of the instructions and safety information in
More informationCombination Breathing Apparatus
and Combination Breathing Apparatus ULTRAVUE FACEPIECE TAL 502 (L) Rev. 0 MSA 2005 Prnt. Spec. 10000005389 (I) Mat. 10064385 Doc. 10064385 ULTRAVUE FACEPIECE COMPONENTS Item Part No. Description 800509
More informationWARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS
WELDING POSITIONER MODEL NO: WP-500 00336OG09207 WARNINGS, SAFEGUARDS & OPERATING INSTRUCTIONS Warnings and Safeguards for Welding and Cutting Operations IMPORTANT - Protect yourself and others! Remember
More informationResistant. Comfortable. Ergonomic
Comfortable The patented SoftPad frame stems (for the Cube, Cube Orange and Stretch models) offer greater protection, stability and adaptability to the face and can be adjusted to three different lengths.
More informationRIPPLE TANK - with rippler & kit
GENERAL DESCRIPTION: RIPPLE TANK - with rippler & kit Cat: SW3430-001 with illuminator, rippler & kit. The ripple tank is used to investigate wave motion in a shallow trough of water to understand how
More informationPressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
More informationInstallation Instructions
Installation Instructions COLONY SOFT 7.0 Centerset Lavatory Faucet 7.0 with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a features found
More informationSpare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
More informationContest Guide STUDENTS ARE NOT PERMITTED TO BRING ANY TEMPLATES.
Welding Fabrication (WF) Manufacturing Skilled and Technical Sciences Contests Contest Guide Please review the following guidelines for the Illinois state competition that will be held on Friday, April
More information10.2. Basketball Single Post System
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationSpare parts list ( ) Spare parts list HD 1.8/13 C Ed
Spare parts list (5.972-842.0) Spare parts list HD 1.8/13 C Ed 26.05.2015 www.kaercher.com EN Table of contents Spare parts list HD 1.8/13 C Ed (5.972-842.0)... 6 10 Housing... 7 11 Housing... 8 12 Hand
More informationOrder No Projection Backboard
Basketball Basketball Single Post System The single-post basketball stand is made with oval aluminium profiles with a cross-section of 120 x 100 mm. The wall thickness of this robust apparatus is 4 to
More informationExchange Part# 2018 List Price
List 22581-1 AIR GUN ASSY ONLY -TORQUE RITE POWER DRA $762 22581-1R $451 N/A 310-120 AIR VALVE, 3 WAY $127 N/A N/A N/A 16806-M BALLSCREW ASS'Y, Z-AXIS $1,660 N/A N/A N/A 15609-16 BALLSCREW MX 16" ENGLISH
More informationSafety Wear. Peace of Mind
Peace of Mind - 331 - T25200 Safety Goggles Protects against flying particles from grinding, chipping and cutting operations Lightweight, soft frame mold High-impact, clear, polycarbonate lens Vertical
More informationWLDG 2447 ADVANCED GAS METAL ARC WELD (MIG)
SYLLABUS WLDG 2447 ADVANCED GAS METAL ARC WELD (MIG) WELDING BRAZOSPORT COLLEGE LAKE JACKSON TEXAS PREPARED BY: Jay Barr DATE: August 25, 2016 INSTRUCTOR RECOMMENDED BY: DATE: DIVISION CHAIRMAN RECOMMENDED
More informationTRAILMATE METEOR ASSEMBLY MANUAL
TRAILMATE METEOR ASSEMBLY MANUAL (DISC BRAKE VERSION) The Trailmate Meteor recumbent has been designed for easy assembly. This means more time to enjoy the smooth ride with single speed, 3 speed coaster
More informationMAGNUM MIG 190 II DIGITAL INSTRUCTIONS MANUAL
MAGNUM MIG 190 II DIGITAL INSTRUCTIONS MANUAL WARNING! FOR SAFETY REASON PLEASE READ AND UNDERSTAND THE FOLLOWING INSTRUCTIONS BEFORE FIRST USE OF THE DEVICE. 1. General instructions Read the operating
More informationContents. 1. General information BROEN BALLOMAX Steel Ball Valves Approvals Quality Management...2
Contents 1. General information...2 1.1 BROEN BALLOMAX Steel Ball Valves...2 1.2 Approvals...2 1.3 Quality Management...2 2. Preoperational Instructions and Precautions...2 3. Plates...3 4. Transport and
More informationBJC-600 BJC-600e BJC-610 BJC-620 PARTS CATALOG. Canon
BJC-600 BJC-600e BJC-610 BJC-620 PARTS CATALOG Canon Canon BJC-600 Series Printer R 1 BJC-600 Series Printer Canon RE # PROD CODE PART NUMBER DESCRIPTION COMMENTS 1 N/A QB1-0786-000 COVER TOP BJC-600 N/A
More informationFireHawk M7 and FireHawk M7XT Control Modules
FireHawk M7 and FireHawk M7XT Control Modules MAINTENANCE AND REPAIR For More Information, call 1-800-MSA-2222 or Visit Our Website at www.msasafety.com CRANBERRY TWP., PENNSYLVANIA, U.S.A. 16066 TAL 1504
More information3/8" Dr. Air Butterfly Impact Wrench
8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and
More informationMAYHEM MAYHEM OWNERS MANUAL. Paintball Guns International. Manufactured by
MAYHEM MAYHEM OWNERS MANUAL Manufactured by Paintball Guns International Table of Contents Specifications...................... 2 Parts diagram and Listing............. 3 Description of Marker Operation.......
More informationQuick Reference Guide - Kleenmaid Gas Cooktops
Quick Reference Guide - Kleenmaid Gas Cooktops BRACKET 1.26 DL094101 N/A BRACKET - FIXING 1.11 DL094154 DL094154 BRACKET - FRONT 1.34 DL094148 DL094148 BRACKET - REAR 1.35 DL094149 DL094149 BURNER PIPE
More informationUser s Manual. Model SWTC800. CAUTION: Adult Assembly Required
User s Manual Model SWTC800 CAUTION: Adult Assembly Required Model SWTC800...3...4...4...5...6.........8...9...10-11 Part Identification Chart... 12 Exploded Drawing and Parts List...13-14 Ordering Replacement
More informationFlexfence Swaging Unit. Product Manual. Release 02/16.
Product Manual www.ingalcivil.com.au 1.0 Safety Precautions 1.1 Personal Protection While operating this equipment it is recommended that the following personal protective equipment be worn; Long sleeve
More informationParts Manual STRIKER Striker 2840 Parts List - PN Printed in USA 03/18/08
Parts Manual STRIKER 2840 Striker 2840 Parts List - PN 238155 - Printed in USA 03/18/08 Standard Parts Recommended General Wear Parts Ref No Part Description Qty Part No 1 Squeegee Hose Assembly
More informationUSER MANUAL. JET TST and JET TST S.
USER MANUAL JET TST and JET TST S www.sisteven.com Types of Jet fans: JET TST UNI: Impulse axial fan single direction JET TST S UNI: Impulse axial fan single direction (short case) JET TST REV: Impulse
More informationOpening Angle 76º 30º [337] 45º 76º 30º [213] 45º 76º 30º [169] 45º 76º 30º [337] 45º 76º 30º [337] 45º 76º 30º [128] 45º 76º 30º [404] 45º 76º 30º
17.22 Picture Force N [lbs] Opening Angle Weight Opening/closure time min 84A3-310000000 84A3X310000000 84A3Y310000000 84A3Z310000000 60º 1,35 84A3-0000000 84A3X0000000 950 84A3Y0000000 [213] 84A3Z0000000
More informationLock-N-Load. Bullet Feeder
Lock-N-Load Bullet Feeder table of contents steps Overview... 2 List of required hand tools... 2 1: Mounting the Bullet Feeder to the Bench... 3 2: Mounting the Bullet Feed Hopper... 4 3: Bullet Feed Hopper
More informationCode AWC20HP Air Compressor
Code 951816 AWC20HP Air Compressor Index of Contents Index of Contents 02 Declaration of Conformity 02 What s Included 03 Safety Precautions 03 Specifications (AWC20HP Air Compressor) 04 Assembly Instructions
More information[MSA The Safety Company] TURBO-FLO. Blowers. Replacement Parts. Accessories. Masks. Exploded Diagrams. safetyscope. Product Portfolio for FABA
[MSA The Safety Company] TURBO-FLO Blowers Replacement Parts Accessories Masks Exploded Diagrams safetyscope Product Portfolio for FABA Turbo-Flo [Fresh Air Breathing Apparatus] Turbo-Flo The Turbo-Flo
More informationCOMPACT TRIPLE WALL OUTLET STATION MODEL INSTALLATION AND OPERATING INSTRUCTIONS
COMPACT TRIPLE WALL OUTLET STATION MODEL 6255-1 INSTALLATION AND OPERATING INSTRUCTIONS To assure safe operation and conformation to local fire codes, all Porter Outlet Stations are designed to be used
More informationSpare parts list ( ) Spare parts list HD 2.3/15 C Ed/ 3.0/20
Spare parts list (5.970-616.0) Spare parts list HD 2.3/15 C Ed/ 3.0/20 23.09.2011 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/15 C Ed/ 3.0/20 (5.970-616.0)... 6 10
More informationOVERVIEW FOR STUNTS FLYER BODY POSITIONS
TCI MODULE 6 Stunts Level 1 Page 1 of 11 OVERVIEW FOR STUNTS FLYER BODY POSITIONS *** NOTE *** For instruction purposes, we will assume regular flyer positions in this manual. That is, it is assumed that
More informationIMPORTANT PLEASE READ BEFORE COMMENCING INSTALLATION
IMPORTANT PLEASE READ BEFORE COMMENCING INSTALLATION This Fitting Guide is designed to assist in the Installation of your Reverse Osmosis System. Some of the parts that are supplied with each system may
More informationFor Salvo Primary Dive Lights
Primary Light Guide USE AND CARE GUIDE For Salvo Primary Dive Lights Salvo, LLC 705 NW Santa Fe Boulevard High Springs, FL 32643 Phone 386.454.0019 Fax 386.454.1661 Table of Contents Lighting Innerspace
More informationTHE RIGHT TURN 100% ROSSIGNOL, FROM THE SOLE OF THE BOOT TO TIP OF THE SKI PLATE BINDINGS BOOTS SKIS. TURNAMIC The new global standard.
p.1 100% ROSSIGNOL, FROM THE SOLE OF THE BOOT TO TIP OF THE SKI Designed as a fully comprehensive, ski-boot-binding system, TURNAMIC integrates each component to provide a simple, adaptable, and dynamic
More informationGACELA roller runners
INDEX roller runners 1... pp. 4 RUNNERS... ADJUSTABLE... FOR DOWEL-FIX DRAWER ASSEMBLY... QUICK ASSEMBLY... WITH ADJUSTABLE FRONT... FOR DROP-DOWN FRONT... 4 5 6 7 8 2 GACELA-3... 38 GACELA-3 RUNNERS...
More informationPERFORMANCE FREERIDE INSPIRED BY NATURE // DRIVEN BY THE ELEMENTS
PERFORMANCE FREERIDE code V1 performance freeride range of use All Round Free Ride Performance 0 Medium Rocker and Medium Flex Progressive Outline with Amazing Control Intermediate to Advanced Free Riders
More informationCANON PowerShot G9 X Waterproof Housing MANUAL
CANON PowerShot G9 X Waterproof Housing Recsea CWC-G9X MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net INTRODUCTION CANON PowerShot G9 X Waterproof Housing
More informationModel PSI Compressor with 3-Gallon Air Tank 12VDC
Model 6350 150 PSI Compressor with 3-Gallon Air Tank 12VDC IMPORTANT: It is essential that you and any other operator of this product read and understandd the contents of this manual before installing
More informationEvaluation of 8 ergonomic computer mice. a regular mouse and. the HandShoeMouse by Hippus
Evaluation of 8 ergonomic computer mice a regular mouse and the HandShoeMouse by Hippus Professor C.J. Snijders PhD, former head dept. of Biomedical Physics and Technology, Erasmus MC, University Medical
More informationCable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
More informationFeature Picture Example Description Use Task Examples
3.3.1 Features Click on the features icon to enter the features. The features are the hand positions and grips that can be programmed onto your i-limb ultra revolution and triggers are the muscle signals
More information