MODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES

Transcription

1 MOL R5000 MONO-LOK irectional ontrol Valves 1, 2, 3 Spool Model R5100 VLVS Model R5200 Model R5300 V32 R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) TV

2 MOL R5000 IMNSIONL T OTIONL, TO OR OTTOM ORTG (LT ORT) I. (3) OTIONL, TO OR OTTOM ORTG (LT ORT) OTIONL, TO OR OTTOM ORTG (LT ORT).406 I. (3) Y Y HI-R HI-R WORK ORTS &.85 ST. LT ORT LOTION OR OWR YON OTIONS SOOL TRVL.313 H WY FROM NUTRL.531 "" FOR FLOT FLOT OTION 3.30 ST. LT ORT LOTION OR OWR YON OTIONS SOOL TRVL.313 H WY FROM NUTRL.531 "" FOR FLOT MOL R5100 ITY: 30 GM M. : 3000 SI WIGHT: 14 LS. MOL R5200 ITY: 25 GM M. : 3000 SI WIGHT: 23 LS. FLOT OTION ST. LT ORT LOTION ST. LT ORT LOTION VLVS OTIONL, TO OR OTTOM ORTG (LT ORT) WORK ORTS,, & OTIONL, TO OR OTTOM ORTG (LT ORT).406 I. (3) ST. LT ORT LOTION OR OWR YON OTIONS SOOL TRVL.313 H WY FROM NUTRL.531 "" FOR FLOT MOL R5300 ITY: 25 GM M. : 3000 SI WIGHT: 34 LS Y F HI-R FLOT OTION ST. LT ORT LOTION OTIONL, TO OR OTTOM ORTG (LT ORT) WORK ORTS,,,, & F TV R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) V33

3 R5000 RO, RLIF URV N STNR FTURS STNR FTURS * conomical monoblock construction of high tensile * ifferential poppet style relief, adjustable from 1500 strength gray cast iron. to 3000 psi (also available in low pressure version * Load check on each spool, adjustable from 500 to 1500 psi) * Hard chrome plated spool. * ower beyond and closed center capability. * Optional 4 osition Float on 1st spool. * Reversible handle. R5100 SGL SOOL VLV RO VLUS 110 SUS OIL T 115 F -SI FLOW LT TO LT TO OR (GM) LT OR TO LT SIFITIONS RLLL IRUIT (R-5200 & R-5300) MIMUM ORTG SI MIMUM ORTG TMRTUR F MIMUM TNK ORT SI ROMMN SYSTM FILTRTION ISO /14 FLOW RTG...30 GM R GM R GM R5300 WIGHT...14 LS R LS R LS R5300 R5000 RLIF VLV 110 SUS OIL T 115 F VLVS R5200 TWO SOOL VLV RO VLUS 110 SUS OIL T 115 F -SI FLOW LT TO LT TO OR OR TO (GM) LT WORK ORTS TO LT TO LT (SI) FLOW (GM) RLLL IRUIT VLVS: oth the R-5200 Two-Spool and R-5300 Three-Spool Valves are parallel circuit valves. When any one of the spools is shifted it blocks off the open center passage thru the valve. The oil then flows into the parallel circuit core making oil available to all spools, If more than one spool is fully shifted then oil will go to the spool with the lowest pressure requirements. However, it is possible to meter the flow to the spool with the least load and power two unequal loads. R5300 THR SOOL VLV RO VLUS 110 SUS OIL T 115 F -SI FLOW LT TO LT TO LT TO LT TO OR OR OR F (GM) LT OR OR OR F TO LT TO LT TO LT SSG LO HK RLLL IRUIT F ONVRSION LUG The above drawing shows a symbol for a Three-Spool Valve Model Number R T V34 R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) TV

4 R5000 ORRG FORMTION STNR VLVS VILL: ll standard valves have end inlet and outlet locations, power beyond conversion plug, complete handle assemblies, and adjustable differential poppet relief. VLV RT NUMR FLOT SOOL1 1st SOOL ONFIGURTION 3 OSITION 4 WY2 SOOL TY 3 OSITION 4 WY TNT3 2nd SOOL ONFIG. 3 OSITION 4 WY2 3rd SOOL ONFIG. 3 OSITION 4 WY2 / ORT SIZ WORK ORT SIZ 3/4 NTF 1/2 NTF 3/4 NTF RLIF STTG R512GG541 R R513GG541 R R R522GG541 R R532GG541 R Four position, four way, tandem center, detented in the float position. Spring center to neutral from work positions. Work ports blocked in neutral. 2. Tandem center. Spring center to neutral from work positions. Work ports blocked in neutral. 3. Tandem center, 3 position detent. Work ports blocked in neutral. VLVS MIS. N FIL ONVRSION KITS FOR MOL R-5000 VLVS SRG KIT OSITION TNT KIT FRITION TNT KIT OSITION TNT SOOL W/ SRG OSITION TNT W/ SRG KIT ONVRSION LUG OWR YON LUG 3/4 NTF OWR YON LUG #12 S NO RLIF LUG LOW JUSTL RLIF RTIG HIGH JUSTL RLIF RTRIG LOS ONVRSION LUG LO HK KIT SRG WITH MIRO-SWITH KIT HNL HRWR KIT HNL LVIS R5100 SL KIT R5200 SL KIT R5300 SL KIT STRIGHT JOYSTIK HNL KIT NT JOYSTIK HNL RTS FLOT HRWR KIT UTO YL SL KIT F OWR YON OWR YON OWR YON SYMOL R T SYMOL R T SYMOL R T TV R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) V35

5 R5000 ORR O SIL VLVS VILL: R5000 Mono-block Valves other than the standard models listed can be made to order. Use the order code matrix below to generate a model number that meets your requirements. Special features not listed can often be made to your specifications. minimum order quantity may apply to special valves. lease consult your sales representative. MOL R5000 ORR O MTRI: Fill each box with one letter or number from each column to generate a model number Note that first all spools are listed then all spool attachments. R53 R52 R51 FIRST SOOL SON SOOL THIR SOOL VLVS MOL NUMR ORT SIZ SOOL TY SOOL TTHMNTS RLIF VLV LT LOTION LT LOTION OWR YON HNL R Single Spool 3/4 NTF In/Out 3 Way, 3 osition 3 osition No Relief nd N (with Not rovided With omplete 1/2 NTF Work Open enter Spring enter to Neutral ower eyond (only available with Handle ssembly R52 2 Option ) outlet location 1) Two Spool 3 ifferential Top 3 osition etent 2 oppet R53 3/4 NTF In/Out 4 Way, 3 osition (No entering Spring) Less Handle Non-djustable Three Spool 3/4 NTF Work Tandem enter 2 Only Set at 1000 SI TO Friction etent onversion 5 (etented in Neutral Only) 3 3 lug #12 S In/Out 4 Way, 3 osition ifferential 4 Without Handle #12 S Work Open enter ressure Release etent Installed oppet N (with ssembly Motor Spool 1 osition etent, Spool "out" Only, Non-djustable ower eyond 6 Spring enter to Neutral Set at 2000 SI Option,, R5200 #12 S In/Out G** F**, F) ower eyond #10 S Work 4 Way, 4 osition ressure Release etent Standard lug Installed 5*** Tandem enter 2 osition etent, Spool "in" 4 with 3/4 NTF ent Joystick Other orts Float Spool and "out", Spring enter ifferential o Handle lease Specify to Neutral oppet Spool "" or "" Only djustable losed enter 6*** G** SI onversion lug Straight 4 osition, Spring enter to Set at 1000 SI Installed Joystick Neutral, etent Spool In for Handle Float osition 5 **Spool option "G", and spool attachment "F", H ifferential F Joystick can and "G" are available on the first spool only. Spring enter oppet ower eyond djustable lug Installed be installed Spool option "G" must be ordered with spool neumatic ctuator on R5300 N SI with #12 S attachment option "G". on special 1 osition etent Spool "out" Set at 2000 SI order Spring enter to Neutral 2 osition etent Spool "in and out", Spring enter to Neutral R 3 osition Spring enter * For other Relief Settings lease Specify with Micro-Switch and oot (actuates with spool in or out movement) *R The last two digits are Relief pressure in hundreds xample: 25=2500 psi, all relief settings are at & 105 F. *** Joystick handle will operate both spools using only one lever handle. The two spools can be operated either independently or simultaneously depending on handle movement. 0 Often used with no relief. Review application. V36 R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) TV

6 R-5000 SRIS STNR N SIL FTUR SRITIONS 9 STNR SOOL LTTTHMNTS LT SRG 9 STNR SOOL TTHMNTS ONVRSION LUG LLOWS ITION OF OWR YON ORT ONVRSION LUG LLOWS ITION OF OWR YON ORT. OIL FLOWS ROUN SOOL TO LT. TNM OIL FLOWS SOOL ROUN SOOL TO LT TWO SOOL JOYSTIK HNL This handle will operate both spools using only one lever handle. The two spools can be operated either independently or simultaneously depending on handle movement. SRG FLOT TNT TNM SOOL FLOT SOOL FLOT TNT FLOT SOOL WORK ORT "" WORK ORT "" "OWR" S FROM LO HK 4 STNR SOOLS IFFRNTIL OT WORK ORT "" The above drawing shows a section view of a 2-spool valve, Model RLIFR522GG541. "OWR" S This is FROM shown LO LT as HK a representative valve model. Other models will differ in appearance. LT 4 STNR SOOLS IFFRNTIL OT WORK ORT "" RLIF LO HK: The load check feature is standard on all R-5000 series valves. ach spool has a separate load check. The load check will prevent the fall of a cylinder as the spool is shifted. It also prevents the back-flow of oil from the work port to the inlet. s shown below the pump must build up enough pressure to overcome the pressure on the work port caused by the weight of the load before the cylinder can move. lease note that the load check has nothing to do with how well the valve will hold up a cylinder with the spool in neutral. The load check is functional only when the spool is shifted. The above drawing shows a section view thru work ports of a R-5100 Single Spool Valve. TV LO WORK ORT "" YLR LO HK OT OIL FROM UM WORK ORT "" SOOL SHIFT FULLY "" LITIONS: The Standard R-5000 Series Valves are open center type valves. For open center valves the hydraulic oil is directed from the inlet to the outlet, or power beyond, through the open center passage when the spools are in neutral. Moving one or more spools closes off the open center passage and directs oil to the work ports. Open center systems most often contain fixed displacement pumps. The M hydraulic TO pumps are fixed displacement gear pumps. The maximum pressure in an open center system is controlled by a relief valve. The R-5000 series valves have a built in relief valve for this purpose. R-5000 Series spool options,, and G are all open center spools when used with power beyond options,, and F. LOS LITIONS: R-5000 Series Valves are available as closed center type valves. For closed center valves the oil through the open center passage is blocked when the spools are in neutral. losed center systems often use a variable displacement pressure compensated pump. When this type of pump is used in a closed center system the system pressure is controlled by the pressure compensator. When the spools of R-5000 series valve are in neutral, system pressure is maintained at the inlet of the valve. For this reason a relief is normally not required or must be set at a higher pressure than the pump compensator. R-5000 Series spool options, and G are converted to closed center by installing a closed center conversion plug, power beyond option. LS NOT that this closed center option does not provide for the drain off of standby spool leakage. This can allow a very small amount of oil to enter the work ports when in neutral. R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) V37 VLVS

7 VLVS 3 WY 3 OSITION OTION This spool option is used to control a single acting cylinder or a unidirectional motor. In neutral the work port is blocked and oil goes through the open center passage to the next spool of a multi-spool valve or the power beyond of a single spool valve. The port is plugged for this option. 4 WY 3 OSITION TNM OTION This spool option is used to control a double acting cylinder or a reversible motor. In neutral both of the work ports are blocked and oil goes through the open center passage to the next spool of a multi-spool valve or the power beyond of a single spool valve. This is the most popular spool option and is used on most rince standard valves. 4 WY 3 OSITION LOS This spool option is similar to spool option above except in neutral the open center passage is blocked. This function is achieved by using spool option with a closed center conversion plug (ower beyond option ). 3 OSITION SRG TO NUTRL OTION This option has 3 positions and a spring that returns the spool to neutral when the handle is released. This option is considered standard on many rince valve models. This option can be converted in the field to 3 position detent by ordering Kit It can be converted to friction detent by ordering Kit OSITION TNT OTION This option provides three detented positions. The spool will remain in any of the three positions in which it is manually placed. No centering spring is provided. Note: This option does not positively lock the spool in place. xcessive vibration or shock loads may effect operation This option can be converted in the field to spring center by ordering Kit It can be converted to friction detent by ordering Kit FRITION TNT OTION This option provides for a detent in the neutral position only. s the spool is manually moved away from the neutral position it will be held in place by the friction of the detent balls on the detent sleeve. Note: ecause the spool is held in place by friction only, excessive vibration may cause spool to move when not in the neutral detented position This option can be converted in the field to spring center by ordering Kit and to 3 position detent by ordering Kit OSITION SRG TO NUTRL TNT SOOL FOR FLOT OSITION OTION G This attachment Is used with spool option G. This option provides for spring center to neutral from either work position. It also provides a 4th position, float detent. The float detent is reached by pushing the spool in as far as it will go. In the float position both work ports are open to return. This allows a cylinder to drift or float. This option is available only with spool option G and cannot be added to a valve in the field. V38 R-5000 SRIS SOOL OTIONS 4 WY 3 OSITION MOTOR SOOL OTION This spool option can be used to control a bi-rotational motor or a double acting cylinder. In neutral the work ports are open to the return. This allows a cylinder to drift or a motor to coast to a stop. In neutral the oil goes through the open center passage to the next LO HK spool of multi-spool valve or the power beyond of a LO HK single spool valve. LO HK LO HK LO 4 WY 3 OSITION LOS HK LO HK MOTOR SOOL LO HK This option is similar to spool option except in neutral the LO open HK center passage is blocked. This function is achieved by using spool option with LO HK a closed center conversion plug (ower beyond option ). LO LO HK HK 4 WY 4 OSITION FLOT SOOL OTION G This option is the same as spool option, 4 way 3 position tandem center, with an added fourth float position. In neutral the work ports are blocked (this will hold up a cylinder) and the oil goes through the open center passage to the next spool or power beyond. In the float position the work ports are open to the return (this will allow a cylinder to drift or float ) and the oil goes to next spool or power beyond. The float position is reached by pushing the spool as far as it will go and Is held in place by a detent. This option must be ordered with spool action option G. TNT RLS JUSTG TNT RLS SRW RLS JUSTG SRW TNT, JUSTG SRW TNT SOOL TNT ONLY, RLS SRG TO NUTRL JUSTG OTION SRW This option provides a pressure release detent for the spool Out position. When the spool is manually placed in the detent position oil is directed to the work port (the port away from the handle). When the pressure in the port reaches a preset level the detent will release and the spool will center. The detent release pressure is factory set at 1200 psi. This pressure is adjustable from 1000 to 2000 psi. The detent release pressure is adjusted by turning the adjusting screw clockwise to increase the pressure and counter-clockwise to decrease the pressure. The spool is spring centered to neutral from the spool In position. This option can be used with spool options, or. R-5000 SRIS SOOL TTHMNT OTIONS TNT RLS This option can not be added to a valve in the field. RLS TNT, TNT SOOL N SRG TO NUTRL OTION F This option is similar to option above except the pressure release detent function is on both the spool In and Out positions. This option is available on R-5100 valve and number 1 spool of R-5200 and R-5300 valves. This option can be used with spool options or. This option can not be added to a valve in the field OSITION TNT SOOL SRG TO NUTRL OTION N This option uses the same parts as option above but is not pressure released. The handle must be manually removed from the detent position. The detent holding force is adjustable. 2 OSITION TNT SOOL N TO NUTRL OTION This option uses the same parts as option F above but is not pressure released The handle must be manually removed from the detent position. The detent holding force is adjustable. R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) TNT RLS JUSTG SRW TNT RLS JUSTG SRW TNT RLS TNT RLS JUSTG SRW JUSTG SRW TNT RLS TNT RLS JUSTG SRW JUSTG SRW TV

8 R-5000 SRIS OWR YON OTIONS OWR YON NOT ROVI OTION This option provides an outlet only with no provision for power beyond. This option can be used with any open center spools where there is no need for a power beyond port. The end outlet, shown at right, is considered standard but a top or bottom outlet can also be specified. When all the valves spools are in neutral oil goes through the open center core to the outlet. This option cannot be converted in the field to have power beyond. It also cannot be converted from open to closed center. ONVRSION LUG STLL OTION This option is similar in function to Option above except the conversion plug is installed in the power beyond location and the end outlet is relocated. This option should be used with the open center spool options and allows the valve to be converted to have power beyond function or be converted from open to closed center. This option is considered the M Standard power beyond option because of the flexibility it adds to the valve. When all the valve spools are in neutral oil goes through open center core to return core and then to outlet. To convert a valve in the field to have power beyond, remove the conversion plug and replace it with one of the power beyond plugs listed. To convert valve to closed center, replace conversion plug with closed center plug (TO TNK) (TO TNK) (TO TNK) ONVRSION LUG ( ) ONVRSION LUG ( ) (TO TNK) (TO TNK) OWR YON LUG STLL OTION 3/4 NTF OWR YON ORT OTION F #12 S OWR YON ORT This option provides both an outlet and a power beyond port (also referred to as a (TO TNK) high pressure carry over port). This allows another valve to be connected downstream. When all the spools of a R-5000 series valve are in neutral high pressure oil can go through the open center core and out the power beyond port to the inlet of downstream valve. The downstream valve only receives oil when all spools of the first valve are in neutral. This option must be used with open center spools and the outlet of valve must be connected to tank. If the power beyond port is not used on a valve N in LT an open center system the power beyond (TO TNK) port must be connected to tank or the power beyond plug replaced with conversion plug (TO TNK) valve with power beyond can be converted to closed center by plugging the power beyond port or installing closed center plug LOS LOK ONVRSION LUG STLL LUG ( ) OTION LOK This option converts an otherwise open center valve to closed center operation. The open center core is blocked by the conversion (TO TNK) plug. Oil cannot pass through the valve when the spools are in neutral. losed center systems are normally associated with variable displacement pumps or any other system where the pump flow is unloaded when system pressure is reached. Note: If the closed center plug is installed in a ONVRSION valve that has a relief it may be necessary to LUG install the no relief plug or adjust the relief ( ) pressure above the compensator setting. OTION OWR lug YON No OTION ORT F (ONNT lug No TO OWNSTRM VLV) LOK (TO TNK) LOS ONVRSION LUG ( ) LOS ONVRSION LUG ( ) LOK (TO TNK) (TO OWR TNK) YON ORT (ONNT TO OWNSTRM VLV) (TO TNK) (TO TNK) OWR YON ORT (ONNT TO OWNSTRM VLV) (TO TNK) OWR YON ORT (ONNT N TO LT OWNSTRM (TO VLV) TNK) LOS ONVRSION LUG ( ) (TO TNK) LOS ONVRSION LUG ( ) VLVS lso, this closed center option does not provide for the drain off of standby spool leakage. This can allow a very small amount of oil to enter the work ports when in neutral. R SOOL SIL LITION VLV UTO-YL TWO SOOL VLV This valve is a modified R-5200 two spool valve that can be used to automatically cycle a hydraulic cylinder. The spools and the valve body have been modified to provide this function. oth spools have the pressure release detent spool attachment. The valve is shown connected to a cylinder in the sketch below. The port is connected to the base of the cylinder. The and ports are tied together and connected to the rod end of the cylinder. The port is plugged. t the beginning of the cycle the cylinder is fully retracted. To begin the cycle both handles are pulled back. Oil is directed to the port and the cylinder will extend until it reaches the end of its stroke. t this point the pressure will build to the detent release pressure and the first spool will center to neutral. Now the oil will go through the open center core to the second spool and is directed out the port to retract the cylinder. When the cylinder reaches the full retract position the pressure will build to the detent release pressure and the second spool will center to neutral. This completes the cycle. To begin the next cycle both handles are again manually pulled back. lease note this valve does not have the loadcheck feature of the standard R5200 valve. lso the port is open to tank in neutral. Model Number R523MM511 Y Y Y TV R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) Y V39

9 SOLNOI ORT R5000 IRTIONL ONTROL VLV RUG RTRIG R TO TNK ILOT(300 SI M) SOLNOI UIL-U RT. 3 Y 5 HI-R 7 SOLNOI UIL-U RT. RUG RTRIG TRNL ILOT FROM LT L OR RMOT SOUR. SOLNOI SOLNOI TRNL ILOT FROM #4 S ORT VLV. SIL ORR ONLY ONSULT SLS RRSNTTIV. VLVS SIFITIONS MIMUM SI MIMUM TNK SI MIMUM FLOW GM MIMUM FILTRTION...10 MIRON MIMUM ORTG TMRTUR F The Solenoid Operated R5000 irectional ontrol Valve allows remote electrical on-off or manual control. This feature can be installed on the R5100, R5200, or R5300. It can be installed on one or all spools of the R5200 or R5300. This option can be purchased as kits and installed by customer. omplete valves are available special order only (min. qty. 25) onsult your sales representative. ITM QTY RT NUMR SRITION S TUTOR KIT 2 2 S HRT SOLNOI OIL N MNIFOL KIT MI STION MNIFOL KIT MNIFOL TU KIT (SHORT) MNIFOL TU KIT (LONG) RS. R. MN. KIT (MULTI-SOOL) RS. R. MN. KIT (SGL-SOOL) 9 1 S HRT RS. UIL-U RT. SRITION RT NUMR RS, UIL-U RT RS. UIL-U OWR YON RT (#12 S) V L WIR OIL V OUL S OIL V WTHR K V OIL V L WIR OIL V OUL S OIL V OIL V ONUIT OIL V OIL The Solenoid Operated R5000 contains two, 3 way-2 position solenoid cartridge valves and a pilot operated piston attached to the main control spool. When both solenoids are de-energized both sides of the pilot piston are open to tank pressure and the spool remains spring centered. When solenoid is energized, pilot pressure is applied to one side of the pilot piston causing the spool to shift from the neutral position to work port. When solenoid is energized, pilot pressure is applied to the other side of the pilot piston causing the spool to shift to work port. In cases where the pilot pressure is provided by the inlet line or #4 S port on valve, a ressure uild-up Valve must be installed in the outlet port. Two versions of the pressure build-up valve are offered. The open center pressure build-up valve and the power beyond pressure build-up valve. oth versions supply SI pilot pressure to the solenoid actuator. When remote pilot is used, the pressure build-up is not required. ecause the valve is internally piloted, overcenter or light loads can be a problem. The inlet pressure must be at least 200 psi during operation. Restrictors can be added to eliminate this problem. V40 R MNUFTURG ORORTION.O. O 7000 NORTH SIOU ITY, SH KOT URL: -MIL: prince@princehyd.com HON (605) F (605) O..M. USTOMR SRVI: (605) F (605) ISTRIUTOR USTOMR SRVI: HON (605) F (605) TV