High Pressure Gas Master Valves
|
|
- Matilda Scott
- 5 years ago
- Views:
Transcription
1 High Pressure Gas Master Valves 9560 Series The 9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and other high pressure manifolds and piping systems. The 9560 Series exhibits a very low operating torque under pressure for ease of manual operation psig maximum working pressure with a 5 to 1 safety factor. Non-rising stem design with O-Ring Seal for durable service. Large brass handwheel for easy low torque operation under pressure. ll valves cleaned for use in oxygen per G G-4.1. Temperature range -40 F to +165 F. ody, bonnet, stem, and seat retainer, stem seal retaining rings and washer...rass Stem O-Ring...Viton Handwheel washer...ptfe STNDRD ONNET VLVE Soft Seat Option The soft seat valves use a TFE seat disc in the seat retainer to create a bubble-tight seal against a machined seat surface on the brass body. Valve v is 2.6. The soft seat option is especially useful for small molecule gases like hydrogen and helium, but can be used for a variety of non-corrosive industrial gases including oxygen, argon, nitrogen, carbon dioxide, nitrous oxide, and acetylene. Metal Seat Option: copper seat disc is used in the seat retainer to create a seal against a Monel body seat, which is installed into the body and can be replaced. Valve v is 2.3. The metal seat option minimizes the possibility of seat decomposition or ignition in oxygen service under adiabatic compression. The metal seat option is recommended for oxygen, and can also be used for other non-corrosive industrial gases. The metal seat option is not to be used for acetylene due to the copper seat. Not to be applied in hydrogen or helium service or where a bubble-tight seal is essential. (Note: in part number) PNEL MOUNT VLVE onnet Versions Standard onnet for low profile. Panel Mount onnet for ease of panel installation. Includes threaded bonnet and nickel plated brass mounting nut. Metal Seat Option 1.625" diameter panel hole required for mounting. (Note: P in part number) HP Version With metal seat option psig maximum working pressure with 4 to 1 safety factor. Use HP prefix for metal seat. (ex. HP9560). Nylon seat option available also (ex. 9560N). utaway View of Valve showing metal seat option. opper Seat Disk Monel ody Insert 2
2 High Pressure Gas Master Valves 9560 Series STNDRD ONNET VLVE DIMENSIONS 9560P 9561P 9563P PNEL MOUNT VLVE DIMENSIONS Part Number Handwheel Inlet Outlet Height Width Width Soft Seat Metal Seat onnection onnection F. NPT 1 2 F. NPT F. NPT 3 4 F. NPT R 9561R NPSM R.H R.H. Female Swivel RL 9561RL NPSM R.H NPS L.H. Female Swivel L 9561L NPSM L.H L.H. Female Swivel R 9563R NPSM R.H NPSM R.H. *[6.19 for L 9563L NPSM L.H NPSM L.H. panel mount version] SE 9560SE SE 9560SE SE- 9560SE /4 F.NPT 3.25 Place P at end of part number for panel mount version. * 3
3 Diaphragm Type Globe Valves 2550 Series The 2550 series valves are designed for use in hospital and industrial piping systems where gases are supplied from a central source to branch outlets throughout the system. UL listed for use with air, acetylene, hydrogen, LP-Gas, nitrogen, and oxygen service. Leakage is prevented by a dependable diaphragm stem seal. resilient seat disc provides positive shut-off. Heavy duty ME stem threads assure easy operation and long working life. Maximum working pressure is 250 PSIG. Working temperature range is -40 F to +165 F. ody (2553 series)...forged rass (2554 series)...ast ronze, Tin Plated Handwheel...luminum Seat Disc...Filled Teflon Diaphragm...Neoprene onnet...rass Stem...Manganese ronze UL D Inlet / Outlet Thread Port Part (Female NPT) Diameter Height Length v Number D Factor
4 Diaphragm Type Globe Valves 2500 Series The 2500 series valves are designed for use in hospital and industrial piping systems where gases are supplied from a central source to branch outlets throughout the system. UL listed for use with air, argon, acetylene, helium, hydrogen, LP-Gas, nitrogen, inert gases and oxygen service. Leakage is prevented by a dependable diaphragm stem seal. resilient seat disc provides positive shut-off. Heavy duty ME stem threads assure easy operation and long working life. Unique back seat design allows the diaphragm assembly to be repaired while the valve remains in service. Maximum working pressure is 400 PSIG. Working temperature range is -40 F to +165 F. ody...ast ronze, Tin Plated onnet...rass Stem...Manganese ronze Seat Disc...Neoprene Diaphragm...Neoprene UL D Inlet / Outlet Thread Port Part (Female NPT) Diameter Height Length v Number D Factor
5 Line Station Valves 7160 Series UL G Part Gas Inlet Outlet onnec- v Outlet Number Service Thread Thread tion Factor Protection* Oxygen rass 7160V and ap & hain Inert M. R.H VL Gases 1 None rass 7161V NGT Fuel ap & hain Gases M. L.H VL None The 7160 series valves are designed for use with oxygen and all fuel gases at station outlets of line distribution systems such as welder s benches, cutting stations, hospital rooms, etc. UL listed. pproved for oxygen and all fuel gas services at 400 PSIG maximum working pressure. O-ring stem seal works with the pressure causing a tighter seal as pressure increases. reverse flow check valve installed in the valve outlet connection helps prevent reverse flow. vailable with brass cap and chain protection. Meets the requirements of National Fire Protection ssociation (NFP) Pamphlet No. 51. ody...rass Stem and Seat Retainer...rass O-ring...Neoprene Seat Disc...Nylon Reverse Flow heck Seat...Neoprene Nitrogen ylinder Valves W6900 Series UL G 580 Outlet The W6900 series valves incorporate a built-in gauge that tells the user at a glance how much pressure is in the cylinder. This is especially important in the fire protection industry. 0 to 3000 PSIG gauge built into the valve. hrome whitened finish. Non-rising stem design provides easy operation and positive shut-off. UL listed. ody...rass, hrome Whitened onnet...rass, hrome Whitened Seat Disc...Nylon Stem...rass, hrome Plated Stem Packing...PTFE Inlet Relief Part Gas Thread Outlet G Pressure Number Service (NGT) Thread onnection (PSI) W6900G580 Nitrogen R.H
6 Pressure Gauges Pressure gauges are available in a variety of popular pressure ranges for gas plant applications. Gauges should be selected so that the maximum working pressure of the particular system represents 66% to 75% of the maximum gauge reading. Greater safety and accuracy may be realized by following these guidelines. Part Maximum Increment ase Number alibration (PSIG) Size Division (PSIG) Material HP Steel 5 S rass Steel rass Plugs (for pressures to 3000 PSIG) Safety factor = 5:1 Typical Plug Part Thread Hex Number onnection Flats NPT D 1 2 NPT E 3 4 NPT F 1 NPT rass Outlet ap and hain ssemblies Internal Threads ap with Plug Part Thread End Ring Number onnection Fits Pipe NF-RH NF-LH 1 2 7
7 Extended onnet ryogenic Globe Valves K and K Series Valves Straight Globe Valve ngle Globe Valve Straight Globe Valve with Stubs and Dimensions Inlet / Outlet Part ody onnections Height Open Length v Number Style (pprox.) D Factor K8404S K8404T 1 2 F.NPT K8404ST x 1 2 F.NPT K9404S K9404T 1 2 F.NPT K Sch5 Pipe K9404PT-F Sch5 Pipe x 1 2 F.NPT K9404ST x 1 2 F.NPT K8406S K8406T 3 4 F.NPT K9406S K9406T 3 4 F.NPT K8408S Straight K8408T 1 F.NPT K9408S K9408T 1 F.NPT K Sch5 Pipe K9408PT-F30 1 Sch5 Pipe x 1 F.NPT K9410S* K9412S* K9412T* F.NPT K Sch5 Pipe K9412PT-F Sch5 Pipe x F.NPT K9416S* K9416T* 2 F.NPT K9416PT-F30 2 Sch5 Pipe x 2 F.NPT 9 K8408S x K9408S ngle K8412S * Valves with bolted bonnet design. 9
8 RegO ryogenic Fill Manifold FM Series Direct replacement for cryogenic fill modules in bulk vessel applications. Our factory-brazed assembly includes top and bottom fill valves, fill check and hose evacuation valve. Precision silver brazed assembly Repeatable performance and geometry 100% factory tested Temperature range -320 to +165 F ody...ronze onnet...rass Seat Disk...TFE Seat Retainer ssembly...rass Stem and onnet Extension Tube...Stainless Steel Packing Spring, Washer...Stainless Steel Jam Ring and Pressure Seal Rings...PTFE Upper onnet and Packing Gland...rass Handwheel...oated Malleable Iron Tube...304L Stainless Steel Tube (2.500) Size and Style Model Piping Size FM000002D 1 FM000004D (3.400) ( OPEN) (1.750) (9.500) (10.250) 10
9 Extended Stem ryogenic Valves ES8450 Series Extended Stem Valves K9450 & K9470 Series Extended onnet Valves These valves are designed for use as a trycock valve or hose drain valve on cryogenic tanks. nother application is as a use, liquid fill, or vent valve on mini-bulk cryogenic tanks. These valves can be used likewise for other cold gas applications requiring extended stem valves. ES 8450 Series Union bonnet. One piece stainless steel stem onical seat design. Maximum working pressure is 600 psig. Working temperature is 320F to +165F. leaned for oxygen service per G G-4.1. ES8450 Series specific feature: Manual torque compression packing. K9450 and K9470 Series specific feature: Extended bonnet and spring loaded packing. K9470 Series specific feature: 304 St. Stl Tube brazed into one or both ends. K 9450 Series ody and onnet...rass Stem...Stainless Steel Seat disc...tfe Handwheel...luminum Packing and onnet Gasket...PTFE onversion Kit K 9450-KIT is a bonnet and stem assembly kit to convert ES 8450 Series and previous ES 9450 Series to the K 9450 style. K 9470 Series Part Number Inlet/Outlet onnections Height ody Width Width with Tube v ES /4 FNPT ES /8 FNPT ES /2 FNPT K /4 FNPT K /8 FNPT K /2 FNPT K 9453F 5/8 OD tubing x 3/8 FNPT K /8 OD tubing both ends
10 Needle Valves MM250 Series and FF250 Series Ideal for use as a gauge isolation valve or applications requiring accurate throttling of pressure. ompact design provides easy installation. Fine stem threading and long taper allow precise metering and leak-free shut-off. Internal stop prevents the stem from being accidentally unscrewed from the body. Rugged forged brass bodies withstand higher pressures. Unbreakable brass handwheel. Valves come equipped for panel mounting. Working temperature range is -40 F to +165 F. Maximum operating pressure: 2000 psig air. leaned for oxygen service per G G-4.1. Female ports available - consult factory. ody...stm 283 rass Stem...rass Knob...rass onnet Nut...rass Panel Mount Nut (Optional)...rass Set Screw...Steel Stem Packing...PTFE with rass Gland MM250 MM250G FF250 FF250G G G Part D E F (In.) (In.) Number (NPT) (In.) (In.) (In.) (In.) (In.) Open losed v MM MM250G FF FF250G
11 Horizontal heck Valves 8500 Series K8508S The 8500 series valves are designed for use as a check valve on large cryogenic bulk stations and cryogenic pipelines. Replaceable Kel-F seat discs. Self-centering cap holds plunger in position. Each valve is cleaned and packaged for liquid oxygen service per G G-4.1. Working temperature range is -320 F to +165 F. Maximum working pressure is 600 PSIG WP. 2 PSI crack pressure. ody...ronze ap...rass or ronze Plunger...rass Seat...TFE Inlet / Outlet Part onnection Length v Number Factor K8508S K8508T 1 F.NPT K8512S K8512T F.NPT K8512S 13
12 Inline heck Valves G Series Gas and ryogenic heck Valves Inline check valves with metal seat option for cryogenic service or with soft seat option for leak free operation in gas service. One directional flow indicated by arrow on body. Large v for high flow capability and low pressure drop. Working temperature range: -320 F to +165 F for metal seats. -20 F to +165 F for soft seats. 1 psig cracking pressure. leaned for use in oxygen service per G G-4.1 ody ( and L suffix)...stm 16 rass (SS and SSL suffix) Stainless Steel Spring...Stainless Steel Piston...Stainless Steel O-Ring (soft seat option units only)...viton Figure 1 Soft Seat Option Figure 2 Part Seating Inlet/Outlet Length Wrenching v Maximum Number Option onnections L Hex Size Operating FNPT D Pressure P Stainless Steel heck Valves G250SS METL 1/4" 2 3/8" 13/16" PSIG G375SS METL 3/8" 2 1/2" 1" PSIG G500SS METL 1/2" "3" 1 1/8" PSIG G750SS METL 3/4" 3 5/8" 1 1/2" PSIG G250SSL SOFT 1/4" 2 3/8" 13/ PSIG G375SSL SOFT 3/8" 2 1/2" 1" PSIG G500SSL SOFT 1/2" 3" 1 1/8" PSIG G750SSL SOFT 3/4" 3 5/8" 1 1/2" PSIG rass ody heck Valves G250 METL 1/4" 2 3/8" 13/ PSIG G375 METL 3/8" 2 1/2" 1" PSIG G500 METL 1/2" 3" 1 1/8" PSIG G750 METL 3/4" 3 5/8" 1 1/2" PSIG G250L SOFT 1/4" 2 3/8" 13/ PSIG G375L SOFT 3/8" 2 1/2" 1" PSIG G500L SOFT 1/2" 3" 1 1/8" PSIG G750L SOFT 3/4" 3 5/8" 1 1/2" PSIG 14
13 Short Stem ryogenic Valves T9450 Series T9460 Series Height Part Orifice Length (pprox.) Tube v Number Inlet Outlet D Factor T F.NPT F.NPT T F.NPT F.NPT.406 None 1.08 T F.NPT F.NPT 1.10 T T9464D T9464D Tube F.NPT The T9450 and T9460 series valves are designed for use on portable cryogenic cylinders and other in-line shut-off valve applications. pproved for TPED in accordance with EN1626. Spring loaded stem seal automatically adjusts for any gasket wear, eliminating the need to constantly retighten the packing nut. Non-rising stem and low profile allow the valve to fit into tight areas and still provide easy access. Unique pressure-sealed moisture barrier helps prevent freeze up at cryogenic temperatures. onical swivel seal design helps prevent seat galling from over torquing. leaned for liquid oxygen service per G G-4.1. Maximum working pressure is 600 PSIG. Working temperature range is -320 F to +165 F. ody...rass onnet...rass Seat Disc...TFE Stem Seal Gasket...PTFE Handwheel...luminum Spring...Stainless Steel Upper Stem...rass Lower Stem...Manganese ronze Extended Stem Retrofit Kits These retrofit kits can be used to convert the 9450 and 9460 series short stem shut off valves into extended stem style. The conversion can be done without removing the valve from your system. vailable in two stem lengths. ll kits are oxygen cleaned and packaged per G G-4.1. onnet...rass Seat Disc...TFE Handwheel...luminum Packing...PTFE Stem...Stainless Steel Stem Seal Gasket...PTFE Stem Part Length Number Style ES8450R 4 Extended Stem, Std. onnet, Manual Packing K9450R 6.5 Extended onnet and Stem, Spring Loaded Packing 15
ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series
M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited
More informationRegO Adapters, Connector, & Fittings
RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of
More informationCryogenic Regulators. Cryogenic Economizers. RG Series. ECL Series. Application
Cryogenic Regulators RG Series D D Inlet/Outlet Factory Connections Pressure Operating Part (F.NPT) Width Setting Range Number A B C D (PSIG) (PSIG) ECL22 22 ECL70 1 10-150 4 2 1 4 3 3 70 8 ECL140 140
More informationCVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationCASH VALVE CRYOGENIC CONTROLS
SH VLVE ryogenic control for pressure build regulators, pressure reducing valves, final line gas valves and combination pressure build economizer valves. Description ryogenics the science of materials
More informationNEW Edge Series Products: OUTFITS and REGULATORS
NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com
More informationCRYOGENICS & LNG Application Guide
CRYOGENICS & LNG Application Guide www.regoproducts.com/cryoflow W IT W IC K Y W E L D G IN 1 Index Cryogenic and Gas Plant (ASU) Construction... 3 Liquid Cryogenic Bulk Tanks Rego... 4 Liquid Cryogenic
More informationExcess Flow Valves. General Information. How They Work. An Explanation and Warning. Proper Installation
xcess low Valves General Information RegO xcess low Valves have been designed, developed, and manufactured for a wide variety of industry needs for more than three decades. Throughout the years, those
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationOperation Manual Piston Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:
More informationMEDICAL EQUIPMENT CATALOG
THE MOST TRUSTED MEDICAL EQUIPMENT IN NORTH AMERICA MEDICAL EQUIPMENT CATALOG Total Components Including Bulk Oxygen Supply, Back up and Delivery Equipment Designs for High Pressure, Liquid or Bulk Applications
More informationNEW EDGE SERIES REGULATORS & OUTFITS
WE LISTENED. WE DELIVERED. NEW EDGE SERIES REGULATORS & OUTFITS Victor Introduces the Newest Addition to the EDGE Series: The EHP3 High Pressure Regulator. EDGE Regulators Now Include These Models EHP3
More informationINDUSTRIAL PRODUCTS. Industrial Products Catalog. Innovative Solutions for Gas Management Systems ENTERPRISES
INDUSTRIAL PRODUCTS ENTERPRISES Industrial Products Catalog Innovative Solutions for Gas Management Systems This catalog provides a comprehensive source of information on Western s line of products used
More informationIndustrial Products. Innovative Solutions for Gas Management Systems. Global Gas Management Technology. Enterprises Innovator Medica Westwinds
Industrial Products Innovative Solutions for Gas Management Systems Global Gas Management Technology Enterprises Innovator Medica Westwinds www.westernenterprises.com GENERAL INFORMATION GENERAL INFORMATION/ORDERING
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationLRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.
LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the
More informationPRESSURE CONTROL REGULATORS
REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities
More informationTypical Single Stage Design SR 450 Series Shown. Two stage regulators add the following in addition to the features listed above:
Single Stage : Recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) would not affect the performance characteristics of the work or test results.
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More informationINSTRUMENTATION VALVES
INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationOperation Manual. Diaphragm Sensed Gas Pressure Regulators
687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Diaphragm Sensed Gas (AP/AZ/AK Models: 20, 100, 500, 1000, 1000T 10PA, 1100, 1200, 12PA, 1300, 1400T, 14PA,
More informationPressure Regulator B-95
Pressure Regulator B-95 TYPE B WATER & AIR TYPE B INTERIOR WATER & AIR B SERIES VALVES DESTRIPTION The Cash Valve Series B pressure reducing and regulating valves are single seated, spring loaded, direct
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationCASH VALVE TYPE KP BACK PRESSURE VALVES
A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or
More informationModel Secure-Gard Pilot Operated Vent Valve SECTION II. Remove all packing material inside and outside of the valve prior to installation.
INSTALLATION, OPERATION AND MAINTENANCE MANUAL (IOM) IOM - 1049 01-17 Model 1049 Secure-Gard Pilot Operated Vent Valve ISO Registered Company SECTION I I. DESCRIPTION AND SCOPE The Model 1049 Secure-Gard
More informationSpecialty Products. Specialty Products Index
Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.
More informationProduct Overview A DIVISION OF MARSH BELLOFRAM
Product Overview P627 & P630 P627 Available with internal relief device - R627 version P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and
More informationA BRIEF TUTORIAL ON GAS HANDLING EQUIPMENT
TABLE OF CONTENTS BACK PRESSURE REGULATORS...26 CGA CONNECTION DRAWINGS...102 CGA CYLINDER CONNECTIONS AND GASKETS...98 CHANGEOVER MANIFOLDS...60-63,65 CHECK VALVES...70 CONVERSION TABLES...103 CUSTOM
More informationV43 Pressure Actuated Water Regulating Valve
FANs 125, 121 Product/Technical Bulletin V43 Issue Date 0996 V43 Pressure Actuated Water Regulating Valve The V43 Pressure Actuated Water Regulating Valves are designed to regulate water flow for water-cooled
More informationREGULATORS FOR SPECIFIC APPLICATIONS
SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and
More informationGas Boosters & Systems
DRIVEN Gas Boosters & Systems SINGLE ACTING - SINGLE STAGE PRESSURES UP TO 10,875 psi DOUBLE ACTING- SINGLE STAGE PRESSURES UP TO 21,750 psi TWO STAGE PRESSURES UP TO 21,750 psi DOUBLE HEAD - SINGLE AND
More informationHigh-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
More informationCash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze
More informationEASTERN ENERGY SERVICES PTE LTD. 60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG Singapore Telephone: Fax:
2 Table Of Contents 1. Introduction 3 2. About this Manual 3 3. Contacting YZ Systems 3 4. Vessel Components 4 5. Specifications 5 6. Application 6 7. Theory of Operation 7 8. DuraSite Installation & Use
More informationPILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660
PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL
More informationHP/UHP Spring-Loaded Regulator
Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationMEDICAL CYLINDER VALVES
MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -
More informationFirst Stage Regulators
DOMESTIC First stage regulators are typically used to reduce tank pressure to an intermediate pressure, usually 5 to 10 PSI for further pressure reduction by a second stage regulator located closer to
More informationStorage Systems and Accessories
Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single
More information1800C & 1800C-HC Service Regulators
SB-855.8 800 & 800-H Service Regulators Maximum Pressure 5 PSIG 800 Regulator Information General Information The merican Meter Series 800 pressure regulators are designed for natural gas applications
More informationIP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators
Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed
More informationDescription Advanced Features Typical Applications
Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied
More informationMATHESON s LaserPro Gases and Gas Delivery Equipment
MATHESON s LaserPro Gases and Gas Delivery Equipment MATHESON s LaserPro Support Gases and Services MATHESON delivers the LaserPro line of gases specifically designed to meet the stringent purity requirements
More informationCRYOGENIC SERIES Regulators, Pressure Gauges, Shut-off Valves, Relief Valves Technology for a Better Future
www.genstartech.com Regulators, Pressure Gauges, Shut-off Valves, Relief Valves CRYOGENIC SERIES Technology for a Better Future GENTEC CRYOGENIC SERIES Cryogenic Shut-off Valves Cryogenic Relief Valves
More informationWelker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More informationIndustrial Regulator Series 1800/2000
E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series
More informationSelf-operated Pressure Regulators for special applications
Self-operated Pressure Regulators for special applications Type 2357-31 Pressure Build-up Regulator with safety function and integrated excess pressure valve Application Pressure regulators for cryogenic
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationHigh Pressure Check Valves
High Pressure heck Valves Pressures to 60,000 psi (4137 bar) O-Ring heck Valves Minimum operating temperature for standard o-ring check valves 0 F (-17.8 ). For low temperature option to -423 F (-252 )
More information1200B2 Series Service Regulators. Instruction Manual
00B Series Service Regulators Instruction Manual 00B Series Service Regulators 0 Elster American Meter 00B Series Service Regulators General Information The 00B Series Service Regulators are available
More informationType 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls
Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical
More informationIP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators
L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification
More informationCash Valve. Type G-4. Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases. Flow Control
Cash Valve Type G-4 Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases Issued - March 2001 CAVMC-0512-US-0609 ISO 9001 Certified Flow Control Description FIG 2042 - Bronze FIG 2043 - Bronze
More information1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG
A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council
More informationBERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
More informationAIR DRIVEN. Gas Boosters & SYSTEMS. Accepting VISA, MasterCard and American Express
AIR DRIVEN Gas Boosters & SYSTEMS Accepting VISA, MasterCard and American Express Gas Boosters AIR DRIVEN FROM 30 PSI TO 21,750 PSI MAXIMATOR Maximator gas boosters are an excellent alternative to high
More informationGauge Valves / Multi-Port Valves & Air Distribution Manifolds
auge Valves / Multi-Port Valves & ir istribution Manifolds OV Series Orifice valves 6,000 psi and 10,000 psi rated V Series Multi-port gauge valves 6,000 psi and 10,000 psi rated PV Series Rising plug
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More information1800C and 1800C-HC Series Service Regulators
1800C and 1800C-HC Series Service Regulators Installation Instructions www.elster-americanmeter.com General Information: The 1800C and 1800C-HC Regulators are available as Full Capacity Internal Relief
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationCENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES
P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationInstallation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More information1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationBERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
More informationTHE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)
THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...
More informationHigh Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
More informationBAILEY CASH VALVE. Other cryogenic fluids include liquefied natural gas, fluorine, krypton, neon, methane and ethane.
BAILEY CASH A WORD ABOUT CRYOGENICS Cryogenics -- the science of materials at extremely low temperatures -- has become more and more important to industry. One important aspect of this field is the liquification
More information299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012
Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of
More informationChlorinator. MODEL C-731 (Floor Mounted)
Chlorinator MODEL C-731 (Floor Mounted) CHLOROTECH Model C-731 is the advance technology Chlorinator designed to feed chlorine gas at a controlled rate. The flow rate of gas is maintained by constant positive
More informationRefrigerant Gases Valves
Refrigerant Gases Valves RUS series Single Outlet Compact Refrigerant Recovery Valves 46 RDU series Diaphragm Packless Multivalves for Refrigerant Gases 47 RBV series Single Outlet Diaphragm Packless Valves
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More information1305 Series Pressure Reducing Regulators
Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationPRESSURE REDUCING STATION INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
PRESSURE REDUCING STATION INSTALLATION, OPERATIONS & MAINTENANCE MANUAL Company Registered Office: Crown House, Stockport, Cheshire, SK13RB No. 850 0700 67 Registered in England and Wales No. 05058855
More informationPrecision Pressure Regulators. Precision Fluidics
Precision Pressure Regulators Precision Fluidics This is increased efficiency. Precision low flow carrier gas control for gas chromatography. Parker precision regulators, valves and controllers are designed
More informationPneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches
More informationModels 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
More informationRHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More information1805 Series Relief Valves
Instruction Manual Form 1211 1805 Series October 2011 1805 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationInstallation Operating Instructions for Duplex Manual Manifolds PX-TMD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationType S301 & S302 Gas Regulators INTRODUCTION INSTALLATION. Scope of Manual. Description. Specifications. Type S301 and S302. Instruction Manual
Fisher Controls Instruction Manual Type S301 & S302 Gas Regulators October 1981 Form 5180 WARNING Fisher regulators must be installed, operated, and maintained in accordance with federal, state, and local
More information64 Series Pressure Reducing Regulators
Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,
More informationGASES PROCESS CHEMICAL SPECIALTY. Gases. Pure Gases & Gas Mixtures. VOC Mixtures EPA Protocols. Propane Methane Nitrogen Air Acetylene Propylene Argon
PROCESS CHEMCAL Gases Pure Gases & Gas Mixtures Carbon Monoxide Ethylene Dichloride Oxygen Ethane Ethylene Hydrogen Vinyl Chloride Nitrogen Propane Methane Nitrogen Air Acetylene Propylene Argon VOC Mixtures
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationJSR Series. Sanitary Valves JSR Series Ultra-High Pressure Reducing Valves. High Purity Bio-Pharma Gas Pressure Reducing Valves.
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valves JSR is the first high purity gas pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. Traditionally,
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationCash Valve CRYOGENIC CONTROLS. ISSUED - FEBRUARY 2000 CAVMC-0514-US-0208 ISO 9001 Certified
ash Valve RYOGENI ONTROLS ISSUED - FERURY 2000 VM-0514-US-0208 ISO 9001 ertified RYOGENI ONTROLS WORD OUT RYOGENIS... ryogenics the science of materials at extremely low temperatures has become more and
More information