OBJECTS AT HEIGHTS. Awareness and Solutions
|
|
|
- Clarissa Gibson
- 5 years ago
- Views:
Transcription
1 OBJECTS AT HEIGHTS Awareness and Solutions
2 WHAT IS A DROP COP?» Learn what encompasses Objects at Heights Safety and how it is part of Safety at Heights planning» Become aware of the costs of dropped objects and other Objects at Heights hazards» Learning best practice for Objects at Heights within the Hierarchy of Controls» Ergodyne is more than just product. We are the go-to for Objects at Heights..» Education» Training» Solutions
3 SAFETY AT HEIGHTS HIERARCHY Safety at Heights Workers at Heights Objects at Heights Fall Protection Other Personal Protective Equipment (PPE) Climbing Equipment Dropped Objects Solutions Organization Solutions Transport Solutions
4 Workers at Heights Fall Protection Other Personal Protective Equipment (PPE) Climbing/Height Access Anchorage Body Support Connectors Hand Protection Head Protection Temperature Control Ladders Lifts Rope Access
5 Objects at Heights Dropped Objects Solutions Organization Solutions Transport Solutions Tethering Topping Retaining Cord Org. Tool Org. Gear Org. Carrying Hoisting
6 AWARENESS» What Causes Dropped Objects» Environmental conditions» e.g. cold hands/fingers, high winds, fatigue from heat, etc.» Striking against or colliding with objects» e.g. jarred lift/platform, tripping, impact, etc.» Negligence and poor work procedures» e.g. talking on radio/cell phone, holding too many items/overloading, poor housekeeping
7 RISKS» Bringing tools & equipment to heights» Workers at height tend to overload themselves with equipment» Causes concerns» Ergonomic (sprains/strains)» Exhaustion & fatigue» Increased chances for dropped objects
8 RISKS» Organization at Height» In addition to tying off tools and equipment its important to keep them organized» Cords, ropes, hoses on the ground» Unorganized workspace at height can lead to hazards as well» Trip hazards» Unnecessary movement and time at height» Increased chance for dropped objects
9 COSTS OF NOT TAKING ACTION: 1. Injury or Fatality 2. Damage 3. Lost Productivity
10 COSTS» Potential Injury or Fatality» Object hitting an individual below» Object causing loss of balance/fall
11 » Damage COSTS» to the dropped item itself» to an object below» to the structure being worked on
12 » Lost Productivity COSTS» You just reached the platform where you need to perform your work..oops! You just dropped the tool you need to complete the job.
13 WHAT DO THE REGULATORS SAY?
14 REGULATIONS: HSE (UK)» HSE: The Work at Height Regulations 2005 (Amended 2007)» Falling Objects: Regulations 10 & 11» 39: Where it is necessary to prevent injury, you must do all that is reasonably practicable to prevent anything falling.» 40: If it not reasonably practicable, you must ensure that no one is injured by anything falling.» 41: You must ensure that nothing is:» thrown or tipped from height if it is likely to injure anyone;» stored in such a way that its movement is likely to injure anyone.» 42: If the workplace contains an area in which there is a risk of someone being struck by a falling object or person, you must ensure that the area is clearly indicated and that (as far as reasonably practicable) unauthorized people are unable to reach it. *Source F on sources slide
15 OBJECTS AT HEIGHTS SOLUTIONS
16 HIERARCHY OF CONTROLS ELIMINATE SUBSTITUTE ENGINEERING CONTROLS ADMINISTRATIVE CONTROLS PPE
17 HIERARCHY OF CONTROLS» Dropped Objects Safety Solutions» PPE Solutions» Secondary protection solutions» Protects/covers the worker or deflects an object after it has fallen» Hard hats, toeboards, netting, steel toe boots
18 HIERARCHY OF CONTROLS ELIMINATE SUBSTITUTE ENGINEERING CONTROLS ADMINISTRATIVE CONTROLS PPE
19 HIERARCHY OF CONTROLS» Administrative Controls» Procedures» Safety professionals are implementing hoisting/lifting procedures» Red Areas or No Go Zones» Safety incentives» Education» Signage and collateral» Training, training, training
20 HIERARCHY OF CONTROLS ELIMINATE SUBSTITUTE ENGINEERING CONTROLS ADMINISTRATIVE CONTROLS PPE
21 HIERARCHY OF CONTROLS» Engineering Controls» Aims to avoid the falling of the object all together (keeps them from happening)» Tool lanyards, topped tool bags, secondary retention» Engineering Controls Preferred!
22 THE 3 T S OF AERIAL SAFETY» Tethered» Prevents object from falling by securing to a worker or other anchor point» Topped» Cover buckets, pouches and other containers while at heights to avoid spilling their contents if tipped or inverted» Tagged» Look for a certified weight rating from the manufacturer stamped on the label or product itself
23 SUMMARY» Objects at Heights safety should be a part of every safety at heights plan: Secure People and Objects!» Objects at heights should have drop prevention and organization practices in place for increased safety.» Use the hierarchy of controls by implementing engineering controls (tool lanyards) before secondary protection PPE solutions (hard hats)» Remember the 3 T s: Tethered, Topped and Tagged» For more information on objects at heights safety and solutions contact Ergodyne (651) or visit the website
Z NE DROPS FREE TM SOLUTIONS FOR A {ERGODYNE S GUIDE TO OBJECTS AT HEIGHTS SAFETY}
SOLUTIONS FOR A DROPS FREE TM Z NE {ERGODYNE S GUIDE TO OBJECTS AT HEIGHTS SAFETY} WWW.ERGODYNE.COM 014 Tenacious Holdings, Inc. All Rights Reserved. All Wrongs Reversed. // OBJECTS AT HEIGHTS PRODUCT
KNOW THE 3T S OF OBJECTS AT HEIGHTS SAFETY SOLUTIONS
// OBJECTS AT HEIGHTS PRODUCT SOLUTIONS // OBJECTS AT HEIGHTS SAFETY With the exception of Chuck Norris, hurricanes and halitosis, there s little more dangerous than a plummeting object. Regardless of
Authorized Ergodyne Distributor:
www.ergodyne.com Authorized Ergodyne Distributor: TO PLACE AN ORDER FOR PRODUCTS IN THIS CATALOG: Call Mars Co. 800-862-6093 (Bloomington) 800-662-5789 (Duluth) 800-662-5789 (Hibbing) Email: sales@marssupply.com
Fall Prevention Program
Fall Prevention Program [SAMPLE] CORPORATION FLEET AUTO HYDRAULIC MECHANICS/TECHNICIANS O C TO B E R 2 1, 2 0 1 4 Golden Rule The golden rule of [corporation s] fall prevention program is unit positioning
Fall and Slip Prevention Test. 1. Fall protection is required in construction at and on scaffolds at.
Date... Name... WSU ID... Fall and Slip Prevention Test 1. Fall protection is required in construction at and on scaffolds at. a) 6 and 10 feet b) 1 and 2 feet c) Not required d) 4 feet for both 2. Falls
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review 1.1 Approved 10.01.2017 David Maine
3M Personal Safety Division. 3M Protecting Workers from Falls and Falling Objects. by Raymond Mann and Travis Betcher
3M Personal Safety Division 3M Protecting Workers from Falls and Falling Objects by Raymond Mann and Travis Betcher 364 454 % OF DEATHS FROM FALLS IN 2015 FROM FALLS 38.8% FROM OBJECTS 9.6% DEATHS FROM
Work At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
Job Hazard Analysis (JHA) What is Job Hazard Analysis (JHA)?
Job Hazard Analysis (JHA) How to Analyze Health & Safety Hazards at your worksite Michael Hall, Director CA EH+S TRAINING CENTER 1 What is Job Hazard Analysis (JHA)? It is a method for systematically identifying
S31 Opening Statement Working at Height
S31 Opening Statement Working at Height Falls from height are by far the most common cause of workplace deaths and one of the main causes of major injury in the workplace. Latest figures reveal that 46
At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.
0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate
1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
DREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
Fall Protection ABC s
Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall
The Work at Height Regulations 2005 A brief guide
Off work sick and worried about your job? Steps you can take to help your return to work The Work at Height Regulations 2005 A brief guide Health and Safety Executive 1 In 2003/04 falls from height accounted
The Work at Height Regulations 2005 A brief guide
The Work at Height Regulations 2005 A brief guide In 2003/04 falls from height accounted for 67 fatal accidents at work and nearly 4000 major injuries. They remain the single biggest cause of workplace
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities
New Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET
SAFETY 101: FALL PROTECTION: REDUCING FALLS DURING RESIDENTIAL CONSTRUCTION: RE-ROOFING FACT SHEET Re-roofing exposes workers to the hazards of demolition work at heights. With the proper fall protection,
FALL PROTECTION GUIDELINE
FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE
Ormiston Academies Trust. Ormiston Horizon Academy. Working at Height Policy October 2016
Ormiston Academies Trust Ormiston Horizon Academy Working at Height Policy Project/job number: Author: Sharlene Smith/Handsam Date: 25/10/16 Contributors: Sharlene Smith Version number: 1.1 Reviewed by:
Meet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
Walking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
Working at Height Policy Edition 1 27 th October Authorized by. ... Managing Director
Working at Height Policy Edition 1 27 th October 2007 Authorized by... Managing Director ISSUE CONTROL This Policy is a controlled document and amendments to this document are affected by the re-issue
ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
Buchanan. Approved: John Downes
Severity Site triio Activity Vacuum Excavator Persons conducting assessment SHEQ DEPT Assessment No triio 21 Review Date 11/01/2021 Revision No. 10 Name: Paul Disley/Ian Buchanan Signature Date: 11/01/2019
Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS
Requirements FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS Navy FP Chapter 13 of OPNAVINST 5100.23G (2005) and Fall Protection Guide for Ashore Facilities
TUDOR PARK EDUCATION TRUST. Working at Heights and Risk Assessment
TUDOR PARK EDUCATION TRUST Working at Heights and Risk Assessment Person(s) responsible for updating the policy: Chief Executive Officer Date Approved: Board of Directors on 7 July 2016 Period of Review:
December 2012 Safety Meeting. Fall Protection Answer Key 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT V.A.0.
Fall Protection Answer Key December 2012 Safety Meeting Below is the answer key for the quiz. 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT Fall Protection 1 Introduction to Fall Protection
Conducting An Effective. Welcome!
Conducting An Effective An introduction to the Five Step Process of Job Hazard Analysis JHA-JSA-SWMS-AHA Introductions Welcome! What do you know about Job Hazard Analysis (JHA s)? Does OSHA require JHA
??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
[Sample] Corporation. Fleet Management Fall Prevention Program
![[Sample] Corporation. Fleet Management Fall Prevention Program](/thumbs/83/88177365.jpg "[Sample] Corporation. Fleet Management Fall Prevention Program")
February 6, 2014 Background: Purpose: [Sample] Corporation Fleet Management Fall Prevention Program Unit Positioning Worker Restraint System Personal Fall Arrest System (PFAS) Fleet Auto/Hydraulic Technicians
ACCREDITED SAFETY TRAINING FOR EQUIPMENT OPERATORS
JOB HAZARD ANALYSIS ELEVATING WORK PLATFORM Note: This is just a guideline. A Assessment must be designed for each specific EWP and each specific work area and task. A JHA is a never ending document. There
CWA Work-at-Height Certification Assessment Criteria Competent Climbing Wall Worker
Course Date(s): Course Location: Provider(s): Candidate s Name: Candidate s Company: Candidate s Personal Contact Information (complete personal mailing address, mobile phone and personal email address):
Fall Protection PPT-SM-FALLPROT V.A.0.0
Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which
CHAPTER 2 2 EMERGENCY PROCEDURES EMERGENCY PROCEDURES. Emergency Response Plan and Procedures
CHAPTER 2 EMERGENCY PROCEDURES 2 EMERGENCY PROCEDURES 3. Communication Systems To relay accurate information quickly, use reliable communications equipment, develop procedures, and train personnel. A backup
FALL ARREST TETHER TRACK RIGID RAIL ANCHOR SYSTEMS DESIGN:
FALL ARREST TETHER TRACK RIGID RAIL ANCHOR SYSTEMS DESIGN: MOUNTING STYLE: LENGTHS: Built to withstand 900 pound maximum arresting force Ceiling mounted or free standing monorail & bridge anchor systems
Stop the Drop. Fall Protection for Tools. Protecting workers from hazards that can result in personal injury, equipment damage and tool loss.
Stop the Drop Fall Protection for Tools Protecting workers from hazards that can result in personal injury, equipment damage and tool loss. M 2018. #MScienceOfSafety M.com.au/FallProtection 1800 245 002(AUS)
CPWR - The Center for Construction Research and Training. Fall Hazard Identification and Control Audit of the Aria Building. City Center Project
CPWR - The Center for Construction Research and Training Fall Hazard Identification and Control Audit of the Aria Building City Center Project Las Vegas, Nevada September, 2008 Submitted by Mark Fullen
Fall Protection and Elevated Work
Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following
Walking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions)
11.4 FALL-ARREST SYSTEM AND EQUIPMENT CHECKLIST (Must answer yes to all applicable questions) This checklist shall be completed either by the Competent Person or a person trained and designated by the
Safety in Precast Erection
Safety in Precast Erection C. Kirubakaran R Star Consultants Pte Ltd, Singapore Abstract: Construction industry is known to be one of the most hazardous among different industries all over the world. The
Patrick Harel Ph
Patrick Harel Ph- 920-418-2714 pharel@capitalsafety.com The Worldwide Experts in Fall Protection Standards Occupational Safety and Health Administration (OSHA) 29 CFR 1910 and 1926 Governing Body Sets
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS Review Quiz: General jobsite safety The following questions and true or false statements help ensure that you understand the material presented in this module.
Fall Protection / Open Holes & Guardrail
Fall Protection / Open Holes & Guardrail 1. Leading Edges Policy Statement It is GW Communications policy that any worker exposed to a fall 6 or greater, shall be protected from coming into contact with
Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014
Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028 Name Date Signature Author Jarred Hearle 30/11/2014 Reviewed John Nulty 30/11/2014 Approved Geoff Selfe 01/12/2014 Key Safety Acts Complete a 5
APPENDIX A. Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows
APPENDIX A Appendix A: Fall Hazards Lesson Test Instructor Copy (answers bold/italic), Student copy to distribute follows 1. In general, fall protection must be provided to construction workers who are
Tower Climber Orientation.
www.natehome.com Disclaimer: Thank you for supporting the National Association of Tower Erectors (NATE) with your participation in this online orientation course. This program is designed as a resource
STFC QUANTITATIVE RISK ASSESSMENT PRO-FORMA
Ref: Description: Assessment Date: Location/Site: Assessor: Department: Assessment Team:: Persons Exposed: Activity/Task: Step 1 What are the hazards? Step 2 Who might be harmed and how? What are you already
Fall Protection. OSHA Office of Training & Education
Fall Protection 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities occur when employees fall from opensided floors and through floor openings. Falls
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
Safety Tips from the WorkSafe People
Fall Protection Fall Protection Requirements Fall Hazard Locations Fall Prevention Personal Fall Arrest System 1 F AL5000(11/02) Fall Protection Any construction activity that exposes an employee to a
FALL PROTECTION. Leader s Guide. Marcom Group Ltd.
1818 FALL PROTECTION Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order, so that employees will see the relationships between the various
What is fall protection?
Fall Protection Training Objective After the lecture, attendees will be able to identify fall protection equipment by understanding the ABC principle to a satisfactory level. What is fall protection? Fall
8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
New Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule
New Walking-Working Surfaces and PPE (Fall Protection) Rule John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov
HS26 Working at Height Policy and Procedure
HS26 Working at Height Policy and Procedure HS26: Working at Height Policy and Procedure v2-0.jun 2016 Page 1 of 8 1. Scope This policy applies to all staff, students and visitors to The Shared Learning
1.0 Scope and Application
1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and
Department of Facilities Management. Occupational Health and Safety. Fall Protection Program
Department of Facilities Management Occupational Health and Safety Fall Protection Program October 2016 1 1.0 INTRODUCTION This program has been developed to provide guidance to those managers and supervisors
FATAL AND SEVERE RISK PROGRAM
FATAL AND SEVERE RISK PROGRAM LEADER SESSION FALL FROM HEIGHTS Only do the task if it can be done safely FALL FROM HEIGHTS OUR COMMITMENT LIFE SAVING BEHAVIOUR: I WILL ALWAYS USE ADEQUATE PROTECTION WHERE
Fall Protection Guidelines. Individual Unit Function: Safety Procedure No.: SOP-0111 Page: 1 of 13. Preparer: Owner: Approver: Safety Safety Safety
Procedure No.: SOP-0111 Page: 1 of 13 MIDGA Reviewed: 09/187/1 Effective: 09/17/17 Supersedes: Ver. 1.0 7 1. PURPOSE These guidelines are to provide minimum standards for work on corrugated roofing, structural
Eliminating Dropped Objects at the Worksite
Eliminating Dropped Objects at the Worksite Allen Smith, DROPS GLOBAL Eliminating Dropped Objects at the Worksite Allen Smith, DROPS GLOBAL ABOUT DROPS: dropsonline.org Oil & Gas Industry Workgroup focused
A GUIDE TO BUYING FALL ARREST EQUIPMENT. uk.rs-online.com (UK customers) (International customers)
A GUIDE TO BUYING FALL ARREST EQUIPMENT (UK customers) www.rs-components.com (International customers) INTRODUCTION In a world of evolving legislation employers in the EU have had a legal responsibility
John Paul (JP) Jones President
John Paul (JP) Jones President of Required Training for Telecommunications Tower Workers in the USA WHAT STANDARDS AND REGULATIONS DO WE TRAIN TO? OSHA CFR 29-1926 & 1910 ANSI 490.1 ANSI Z359 ANSI 10.48
Fall Protection Refresher Orientation. Fall Protection Refresher Orientation 1
Fall Protection Refresher Orientation Fall Protection Refresher Orientation 1 Course Objectives! Understand the definitions of fall prevention, fall restraint, and fall arrest.! Understand the requirements
Working at Heights Training Checklist (Ontario Version)
Working at Heights Training Checklist (Ontario Version) The new working at heights training is different from the fall protection training required by Sec. 26.2(1) of the Ontario Construction Projects
Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 11
Issue Date: Review Date: Page Number: 1 of 11 1. Hazard Management Details General Plant/Equipment Item: WOOD LATHE Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity:
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Working at eight SWMS No. 16 Authorized and email Signed by the (Managing
Fall Protection Training
Fall Protection Training Reference: OSHA 29CFR 1910 OSHA 29CFR 1926 ANSI Z359.1-1992 (R1999) Introduction Deaths occurring from falls during 1996 increased five percent over 1995 figures. This accounts
"FALL PREVENTION IN THE WORKPLACE"
MAJOR PROGRAM POINTS "FALL PREVENTION IN THE WORKPLACE" Part of the "GENERAL SAFETY SERIES" Quality Safety and Health Products, for Today...and Tomorrow Outline of Major Points Covered in the "Fall Protection"
Scissor Lifts Course Outline
Scissor Lifts Course Outline The following outline summarizes the major points of information presented in the program. The outline can be used to review the program before conducting a classroom session,
Risk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
"FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
Rescue Ladder Model: CTB LDR-RSC 18ft (5.48m)
Rescue Ladder Model: CTB LDR-RSC 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD
Accident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
Reviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene
Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature
Dangerous Occurrence: Collapse of mobile crane
Accident Case Studies Dangerous Occurrence: Collapse of mobile crane Crane Operator had hoisted up a bag of sand (780 Kg) over the rooftop. While doing so, the Overload Radius Indicator (ORI) alarm sounded
Working Near, On or Above Water
APPROVALS Position Name Date President Donna Stobbart DISCLAIMER: City Transfer nor any person acting on its behalf, makes any warranty, express or implicit, with respect to the use of information, data,
Workman Fall Protection Products
Workman Fall Protection Products > Workman > Excellent value > Optimum quality > Reliable protection Quality, Comfort and Value come together in the line of products. > Practical operation > User-friendly
SLIPS, TRIPS AND FALLS KEEPING A STEP AHEAD
SLIPS, TRIPS AND FALLS KEEPING A STEP AHEAD FACILITATOR S GUIDE 2660 Horizon Drive SE Grand Rapids, MI 49546 800-842-0466 www.safetyontheweb.com What s Inside Overview 1 Facilitator s Guidelines 1-a Overview
New Mexico Institute of Mining & Technology. Fall Protection Program
New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately
Job Hazard Analysis. JHA No. FBP-JHA Revision No. Draft General or Job-Specific Description of Work
JHA No. FBP-JHA-14-0014 Revision No. Draft General or Job-Specific Description of Work Clean X230 Outlet Basin Site Location PORTS Activity or Area Name Not listed Facility or Project [Unspecified] Specific
SAFE WORK METHOD STATEMENT Part B
SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS
FALL PROTECTION PLAN INSTRUCTIONS
Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or
SAFE WORK PROCEDURE. Location of Equipment Written By: Approved By: Date Created Last Revision
Page 1 of 5 Location of Equipment Written By: Approved By: Date Created Last Revision School: Facilities & Operations Brent Vandenbosch Gordon Howe October 14, 2009 new Room: n/a Barry Hamilton HAZARDS
FALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
CHAPTER 10 FALL PROTECTION
CHAPTER 10 FALL PROTECTION A. INTRODUCTION... 1 B. CHAPTER-SPECIFIC ROLES and RESPONSIBILITIES... 2 C. HAZARD IDENTIFICATION... 3 1. Job Hazard Analysis (Jha).... 3 2. Fall Hazards... 3 D. HAZARD CONTROL...
Floor Mount Socket. T: +44 (0) F: +44 (0)
G-Davit : Floor Mount Socket USER INSTRUCTION MANUAL A davit socket for installation bolted to a high strength flooring material. Suitable for both fall arrest use and lifting. EN795 Class B, PPE Anchor
Rescue Ladder Model: KT ft (5.48m)
Rescue Ladder Model: KT36164 18ft (5.48m) IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE
FALL PROTECTION PROGRAM (OHS-0010)
() For Issued: December 17, 2007 Revised: 1 st Issue PAGE 1 OF 17 Table of Contents 1.0 Purpose...2 2.0 Document Control...2 2.1 Approvals...2 2.2 Responsibility...2 3.0 Definitions...3 4.0 Objective...7
Section One. Agenda Pretest What Do You Know About Cal/OSHA (Quiz) Post Test Train the Trainer Course Evaluation
Section One Agenda Pretest What Do You Know About Cal/OSHA (Quiz) Post Test Train the Trainer Course Evaluation Train-the-Trainer Course 2013 Ag da ay O 8:00-9:00am Introductions and Overview Course overview
WORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
Temporary load-bearing support for structural alterations or repairs
CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal
Safe Work Practices and Permit-to-Work System
CHAPTER 24 Safe Work Practices and Permit-to-Work System 24.1 INTRODUCTION OSHA s Process Safety Management (PSM) Standard (OSHA, 1992) requires employers to develop and implement safe work practices (SWPs)
Sample Fall Rescue Plan for Bridge Work
This document is intended to provide guidance for developing fall rescue plans for bridge contractors. The Occupational Safety and Health Administration s (OSHA) regulation 29 CFR 1926.502(d)(20) states:
IRATA International code of practice for industrial rope access
IRATA International code of practice for industrial rope access Part 3: Informative annexes Annex Q: Fall factors, fall distances and associated risks September 2013 The first edition of Annex Q was published
Centennial Fall Protection Work Plan _CP_11_20_en_A1
Centennial Fall Protection Work Plan 0206500_CP_11_20_en_A1 Project Title: Contract and Task Order Number: Project Location (be specific, include Bldg. # / Floor / grid / etc.): PSO/SSHO Name: Complete
UNIVERSITY OF WASHINGTON FALL PROTECTION PROGRAM MANUAL
UNIVERSITY OF WASHINGTON FALL PROTECTION PROGRAM MANUAL October 2018 TABLE OF CONTENTS Additional help... 4 PURPOSE... 5 SCOPE... 6 ROLES AND RESPONSIBILITIES... 7 FALL HAZARD ASSESSMENT... 9 Hierarchy