Site Safety & National Transmission Pipeline Marker Signs

Size: px
Start display at page:

Download "Site Safety & National Transmission Pipeline Marker Signs"

Transcription

1 Site Safety & National Transmission Pipeline Marker Signs supplied by Version 2 10/08

2 Wear safety harness SS119 A SS119 D SS120 A SS120 D SS121 A SS121 D SS122 A SS122 D Safety helmets must be worn in this area Eye protection must be worn Goggles must be worn when using this grinder SS123 A SS123 D SS124 A SS124 D SS195 A SS195 D SS162 A SS162D Speed Limit SS137 B SS137 S 10 5 Speed Limit SS138 B SS138 S Permit to work in operation No smoking or naked lights SS131 A SS131 D SS125 A SS125 D SS126 A SS126 D Danger of Explosion SS127 C SS127 G Danger of Explosion SS128 C SS128 G Danger of Explosion SS129 C SS129 G Danger of Explosion SS130 C SS130 G

3 Machines can start AT ANY TIME Minimum standard of Personal Protective Equipment (P.P.E.) on site SS193 Minimum standard of Personal Protective Equipment (P.P.E.) MUST be worn on site at all times. Ear defenders MUST be carried at all times ready for use. SS207 MUST be worn at all times. Ear defenders MUST be carried at all times ready for use. SS162 NO UNAUTHORISED VEHICLES BEYOND THIS POINT SS195 SS 206 SS198 Display Permit to Work at all times Lockable Poster Case SS171

4 LNG LIQUID FILL LINE CATHODIC PROTECTION SS152 PRESSURISING GAS FROM B.O. COMPRESSORS DISCHARGE SS154 PRESSURISING GAS FROM LNG EVAPORATOR SS155 LNG VAPOUR RETURN LINE SS153 Emergency Gate DO NOT OBSTRUCT SS161 SS196 SS197 SS203 SS200 H CLOSED NRO IN OPERATION. REQUEST PERMISSION BEFORE VALVE OPERATION SS204 OPEN NRO IN OPERATION. REQUEST PERMISSION BEFORE VALVE OPERATION SS205 WARNING BE AWARE OF CYCLISTS & PEDESTRIANS WHEN LEAVING THIS SITE SS188 All work MUST be authorised by the Shift Engineer Lighters, matches and other ignition sources are not permitted on site Smoking is prohibited If siren sounds evacuate to muster point SS166 SS167

5 to health Safety Signage Danger 240 volts CCTV in operation Caution Fork-lift trucks operating SS148 A SS148 D SS199 A SS199 D SS149 A SS149 D SS150 A SS150 D awarning CONTAINS ASBESTOS Breathing asbestos dust is dangerous to health Follow safety instructions NITROGEN Asbestos has been identified in Unit 1C Internal Location: Ground Floor Flexi Anti Vibration Gaiter Ref. Inspection 33 External Location: All Elevations Metal Surfaces Galbestos Paint Coating Ref. Inspection 35 Before allowing any work to commence in this area, that might impact upon the presence of the Asbestos products identified above, consult the Hazard and Precautions booklet, your line manager or a member of the SHE team for advice. SS151 A SS151 D SS172 N In case of emergency telephone SS206 A SS190 A HELIUM SS191 A EMERGENCY SERVICES Danger High Voltage HOLDING Unauthorised persons keep out AREA Climb facing ladder Danger SS158 A SS158 D SS159 SS160 A SS202 C SS202 G awarning CONTAINS ASBESTOS Breathing asbestos dust is dangerous Follow safety instructions Warning Asbestos Do not disturb Avoid damage. Report accidental damage immediately CARBON DIOXIDE SS156 P SS201 A SS163 A

6 LNG NO LOADING UNTIL: NITROGEN NO OFFLOADING UNTIL: 1. National Grid personnel present 2. Road closure booms are lowered 3. Vehicle wheels are chocked 4. Vehicle earth is proved and earthing cable is connected to earthing point 5. Tanker pressure is lower than 2 barg 6. Automatic or portable dry powder extinguishing facilities are available 7. Hose inspection completed 1. National Grid personnel present 2. Road closure booms are lowered 3. Vehicle wheels are chocked 4. Vehicle earth cable is connected to earth point 5. Receiving tank has been depressurised 6. Gas check has been carried out if LPG tanker present 7. Hose inspection completed SS144 SS147 2RE 1977 SS145 NON - FLAMMABLE COMPRESSED GAS LIQUID NITROGEN 2 DANGER COMPRESSED GASES POTENTIALLY LOW OXYGEN ATMOSPHERE. SAMPLE ATMOSPHERE FROM OUTSIDE ENCLOSURE PRIOR TO ENTRY SS146 NTS Pipeline Marker on boundary marker post Admin Block Visitors overspill car park Please keep off the grass SS194 SS168 Control Room SS169 Contractors Area SS157 SS170

7 East Area Peg Marker NTEPM106 M West Area Peg Marker NTWPM106 M North Area Peg Marker NTNPM106 M Scotland Peg Marker NTSPM106 M GAS NTS HP GAS PIPELINE BEFORE EXCAVATING CALL FREE (All calls are recorded and may be monitored) FOR GENERAL PIPELINE ENQUIRIES CONTACT CP Plate / Crossing Point Plate English NTSCP132 F NTSCP132 H GAS / NWY NTS / STG HP GAS PIPELINE PIBELL NWY PU BEFORE EXCAVATING CALL FREE CYN CLODDIO RADFFÔN (All calls are recorded and may be monitored) (Caiff galwadau eu recordio ac effallai eu monitro) FOR GENERAL PIPELINE ENQUIRIES CONTACT AM YMHOLIADAU CYFFREDIN Y PIBELL GALW CP Plate / Crossing Point Plate Welsh / English NTSCP207 F SS139 R NTSCP207 H Site Safety Sign supporting poles & brackets High Pressure Marker Warning Tape NTHPM107 E 3642 SS135 J SS133 I SS134 K SS136 L

8 Cathodic Protection Tags SLEEVE PIPE ANODE HALF CELL T/R NEGATIVE BOND A.G.I. Marker Plate Fixing Plugs MPFP62A - Clear COUPON REFERENCE DEAD SIDE I/J DEADSIDE CELL POSITIVE NEGATIVE UNPROTECTED Size: 35mm x 25mm HPTAG58A (white with black text) Marker Plate Fixing Plugs MPFP62B - Black Product Key. 3mm UPVC sheet A = 300mm x 200mm. B = 300mm x 300mm 2mm Polycarbonate (Preferred to UPVC sheet because UV filter allows longer colour fast life). C = 300mm x 220mm Self-Adhesive Vinyl D = 300mm x 200mm E = 305mm x 50mm F = 203mm x 179mm G = 300mm x 220mm. Clear polycarbonate material, either 1mm or 2mm in thickness, for maximum UV protection and high impact resistance. Design Specifications Freestyle Sign & Print Company. 1mm Polycarbonate H = 203mm x 179mm. 3mm Aluminium I = 1017mm x 1017mm J = 1300mm x 900mm K = 1200mm x 400mm L = 1300mm x 1000mm S = 300mm x 300mm. 0.5mm semi-rigid PVC M = 170mm x 158mm N = 300mm x 200mm P = 200mm x 100mm. Aluminium poles & brackets R = Signs made to order To order please phone, fax or the product and quantity required.. An order confirmation and delivery date will be ed to you within 24 hours. As fixing poles and brackets are available in a variety of sizes & colours, a price will be supplied on request.. Safety Signs manufactured from high impact UVPC or aluminium for extra durability in exposed positions. Unit 3, Spring Meadows Business Centre, Highfield Farm, Wargrave, Berkshire RG10 8PZ Tel: Fax: Website: sales@freestyle-signs.co.uk

Working Environment Safety Assessment

Working Environment Safety Assessment For your own safety and/or safety of your workforce, and to improve the efficiency of your business practices, you should be aware of, and be up to date with, the key safety issues and good practices relevant

More information

This training does not attempt to cover all safety regulations or precautions.

This training does not attempt to cover all safety regulations or precautions. This training does not attempt to cover all safety regulations or precautions. For additional safety regulations and precautions, see the following standards: American Welding Society (AWS) American National

More information

WELDING, CUTTING AND BRAZING

WELDING, CUTTING AND BRAZING - 1 - WELDING, CUTTING AND BRAZING Are only authorized and trained personnel permitted to use welding, cutting or brazing equipment? Does each operator have a copy of the appropriate operating instructions

More information

Contractors' Code of Safe Practice

Contractors' Code of Safe Practice Contractors' Code of Safe Practice Introduction As the controller of premises, The University of Hong Kong has a duty to ensure, so far as is reasonably practicable, the health and safety of all its employees,

More information

Bespoke Electricity & Gas Signage. supplied by. Freestyle SIGN & PRINT. Version 3 10/09

Bespoke Electricity & Gas Signage. supplied by. Freestyle SIGN & PRINT. Version 3 10/09 Bespoke Electricity & Gas Signage supplied by Freestyle SIGN & PRINT C O M P A N Y Version 3 10/09 BS175 BS176 BS177 BS181 DAMAGED EARTHS BS178 BS179 BS180 BS245 FRAGILE SURFACE DO NOT CROSS WITHOUT PLATING

More information

Risk Assessment Form (Qualitative)

Risk Assessment Form (Qualitative) Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works

More information

Responding to Natural Gas Pipeline Emergencies

Responding to Natural Gas Pipeline Emergencies Responding to Natural Gas Pipeline Emergencies Who is Florida Gas Transmission? Florida Gas Transmission operates nearly 5,000-miles of interstate natural gas transmission pipelines, a system that extends

More information

Safety in the Collision Center Paint Department. Safety Tips while working

Safety in the Collision Center Paint Department. Safety Tips while working Safety in the Collision Center Paint Department Mercedes-Benz is committed to promoting safe work practices at all times. To heighten your awareness of the safety issues in body and paint departments PPG

More information

Emergency Procedures for Forecourt Sites Storing and Dispensing LPG

Emergency Procedures for Forecourt Sites Storing and Dispensing LPG SECTION F7 Emergency Procedures for Forecourt Sites Storing and Dispensing LPG (Propane) This document has been designed to give essential information FOR ALL STAFF on how to deal with an emergency involving

More information

Safety Risk Assessment Roofing Works / Surveying / Inspections

Safety Risk Assessment Roofing Works / Surveying / Inspections One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 One Direct Operatives accessing roof

More information

Health & Safety Contractor rules

Health & Safety Contractor rules Health & Safety Contractor rules Contents 1. Introduction... 1 2. The legal bit explaining our terminology... 1 2.1 Legal requirements... 1 3. Our health and safety requirements... 1 3.1 Access to BT premises...

More information

TABLE OF CONTENTS PART 2 - CONFINED SPACES

TABLE OF CONTENTS PART 2 - CONFINED SPACES May 11, 2006 TABLE OF CONTENTS PART 2 - CONFINED SPACES Page DEFINITIONS... 2-1 GENERAL... 2-2 RESPONSIBILITIES... 2-2 HAZARD ASSESSMENT AND WORK PROCEDURES... 2-3 IDENTIFICATION AND ENTRY PERMITS... 2-3

More information

HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD

HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD Location: Company Wide Date of Assessment: 04 April 2017 Revision No.: 0 Description of planned work or activity: HIRA Register Attendees: see attached tool-box

More information

24L OIL FREE AIR COMPRESSOR MODEL NO: TIGER 7/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS10/13

24L OIL FREE AIR COMPRESSOR MODEL NO: TIGER 7/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS10/13 24L OIL FREE AIR COMPRESSOR MODEL NO: TIGER 7/250 PART NO: 2244030 OPERATION & MAINTENANCE INSTRUCTIONS LS10/13 INTRODUCTION Thank you for purchasing this product. Before attempting to use this product,

More information

Safety Identification

Safety Identification Safety Identification Safety Signs, Pipe Marking, Lockout/Tagout, Logistics Labelling, Area Marking About BRADY Once you have worked with BRADY, our name will stick with you, (just like our labels) because

More information

List all key terms and acronyms used in the procedure, and their definitions.

List all key terms and acronyms used in the procedure, and their definitions. Purpose The purpose of this procedure is to provide guidelines for electrical safety in general within Seqwater in compliance with the Electrical Safety Act 2002, Industry Codes of Practice, Regulations,

More information

Contractor handbook. Purpose

Contractor handbook. Purpose Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance

More information

VERTICAL AIR COMPRESSORS

VERTICAL AIR COMPRESSORS VERTICAL AIR COMPRESSORS MODEL NO: VE15C150, VE18C150, VE25C150 PART NO: 2226010, 2226020, 2226025 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Vertical

More information

GUIDANCE FOR MANAGING THE RISKS ASSOCIATED WITH END OF LIFE LPG VEHICLES

GUIDANCE FOR MANAGING THE RISKS ASSOCIATED WITH END OF LIFE LPG VEHICLES GUIDANCE FOR MANAGING THE RISKS ASSOCIATED WITH END OF LIFE LPG VEHICLES NSW QUAD BIKE SAFETY IMPROVEMENT PROGRAM SNAPSHOT 2016 17 Disclaimer This publication may contain information about the regulation

More information

VERTICAL AIR COMPRESSORS

VERTICAL AIR COMPRESSORS VERTICAL AIR COMPRESSORS MODEL NO: VE11C150, VE15C150, VE18C150 PART NO: 2226005, 2226000, 2226015 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE Vertical

More information

CITY AND COUNTY OF DENVER CR&CF RISK UNIT Compressed Gas Safety Standard

CITY AND COUNTY OF DENVER CR&CF RISK UNIT Compressed Gas Safety Standard CITY AND COUNTY OF DENVER CR&CF RISK UNIT 65.5.11 Compressed Gas Safety Standard 1.0 Introduction 2.0 Scope This standard has been developed to protect all City and County of Denver employees and contractors

More information

PURPOSE OF THE POLICY

PURPOSE OF THE POLICY Title: Safe Storage, Handling, Use and Disposal Procedures of Compressed Gas Cylinders Effective Date: November 2005 Revision Date: March 1, 2017 Issuing Authority: Responsible Officer: VP, Capital Projects

More information

Gulfstream Natural Gas System

Gulfstream Natural Gas System Website: www.gulfstreamgas.com Gulfstream has prepared this fact sheet as a guide for emergency response officials who may be asked to respond to an incident involving a Gulfstream natural gas pipeline

More information

SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT

SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT Prepared for:- Date:- Work Scheduled:- SCOPE OF WORK Carry out installation of flow meters / pressure sensors. Installation of flow meter procedure

More information

ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS

ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS Annex 3, page 2 ANNEX AMENDMENTS TO THE INTERNATIONAL CODE FOR FIRE SAFETY SYSTEMS (FSS CODE) CHAPTER 15 INERT GAS SYSTEMS The text of existing chapter 15 is replaced by the following: "1 Application This

More information

CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT

CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT Reference: IFC, Denver Amendments, NFPA Approved: Joseph L. Gonzales, Division Chief, Fire Prevention and Investigation Division Number: IFC- 3001-1 Effective Date: February 1, 2012 Page 1 of 5 This policy

More information

Contractor s HSE BOOK

Contractor s HSE BOOK Contractor s HSE BOOK 1 P a g e Contents Introduction... 3 Objectives... 3 1. HSE POLICY... 4 2. Visitors... 4 3. HSE ASPECTS OF CONTRACT MANAGEMENT... 4 4. QATAR POWER SAFETY RULES... 5 5. GENERAL SAFETY...

More information

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848

Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 Cal/OSHA Gas Systems for Welding GAS WELDING Cal/OSHA T8 CCR 1536 Cal/OSHA T8 CCR 4799 Cal/OSHA T8 CCR 4845 Cal/OSHA T8 CCR 4848 When performing gas welding, the following precautions, work procedures,

More information

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 5 Utilities Gas Emergencies Revised

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 5 Utilities Gas Emergencies Revised Truck Module Page 1 of 5 GAS EMERGENCIES Introduction Natural gas and Liquid Propane Gas (LPG) are flammable gases. Many households and commercial buildings utilize these gases for everything from heating

More information

PSSI 36 General Confined Spaces, Tunnels, Culverts and Similar Spaces

PSSI 36 General Confined Spaces, Tunnels, Culverts and Similar Spaces 1. SCOPE This document now includes provision for safe access to cable tunnels and culverts previously covered in PSSI 37 which is now withdrawn. The term Confined Space is defined in the Confined Spaces

More information

Laboratory Safety Committee

Laboratory Safety Committee Laboratory Safety Committee Compressed Gas Cylinder Policy Purpose Compressed gas cylinders are an important component of many research laboratories. Wide varieties of gases are packaged in compressed

More information

The Corporation of the Town of Tecumseh

The Corporation of the Town of Tecumseh The Corporation of the Town of Tecumseh POLICY MANUAL POLICY NUMBER: 59/11 EFFECTIVE DATE: October 11, 2011 SUPERCEDES: PPC 23/07 - April 24, 2007 APPROVAL: RCM October 11, 2011 (RCM-343/11) SUBJECT: Confined

More information

Unit 7 Worksheet 7 Procedures and Precautions

Unit 7 Worksheet 7 Procedures and Precautions Unit 7 Worksheet 7 Procedures and Precautions Describing health and safety precautions In industry, increasing emphasis is placed on safety planning at all stages of the development process. This often

More information

NATURAL GAS MAINTENANCE. Part 192 Subpart "M"

NATURAL GAS MAINTENANCE. Part 192 Subpart M NATURAL GAS MAINTENANCE Part 192 Subpart "M" CONTACT INFORMATION Pamela West Pipeline Safety Specialist U.S. Department of Transportation PHMSA Inspector Training and Qualifications Main: (405) 686-2310

More information

Tagging - Teltag System

Tagging - Teltag System First Used Initials I - Inspection R - Repair 56 Tagging - System Two Part Label The two part set consists of firstly a rigid polycarbonate holder, back printed, so that the details of the equipment can

More information

2.0 Management Systems and Documentation

2.0 Management Systems and Documentation SHE Rules BOW142.3 1.0 Introduction This document details the safety, health and environment rules that apply to anyone accessing Arqiva sites and describes the standards of performance expected. This

More information

PROPERTY & ESTATES GROUP

PROPERTY & ESTATES GROUP PROPERTY & ESTATES GROUP SAFE WORKING PROCEDURE 2-17-04 WORKING IN CONFINED SPACES Purpose of Document This document describes SRUC s policy and procedure for working in confined spaces. It applies to

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

Instructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading

Instructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of

More information

Protocol for Confined Space Entry Requirements

Protocol for Confined Space Entry Requirements Occupational Health and Safety (OHS) Policy Document Number # QH-PTL-275-12-1:2012 Protocol for Confined Space Entry Custodian/Review O fficer: Director Safety and Wellbeing Version no: 1.0 Applicable

More information

Safety at Work. Rules for Staying Alive

Safety at Work. Rules for Staying Alive Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These

More information

Risk Management Resources

Risk Management Resources Risk Management Resources Machine Guarding Name: Notes: Electrical Systems: Fire Prevention Are circuit breakers accessible to personnel, protected from physical damage, and located away from ignitable

More information

Wilkins Safety Group

Wilkins Safety Group Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes

More information

100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13

100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13 100L AIR COMPRESSOR MODEL NO: TIGER 16/1010 PART NO: 2244025 OPERATION & MAINTENANCE INSTRUCTIONS LS01/13 INTRODUCTION Thank you for purchasing this product. Before attempting to use this product, please

More information

Risk Assessment & Safe Working Practice

Risk Assessment & Safe Working Practice RA Ref Number: 32 Revision: 4 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: confined space Next Review Date: 01/04/2019 Notes: Please refer to Safe Working Practices

More information

I. Subject: Compressed gas cylinders, regulators, and portable liquid systems.

I. Subject: Compressed gas cylinders, regulators, and portable liquid systems. I. Subject: Compressed gas cylinders, regulators, and portable liquid systems. II. Objective: To provide safe and effective use, storage, and transport of therapeutic gases. II. Procedure: A. Compressed

More information

OWNER S MANUAL. Page: 1 of 8

OWNER S MANUAL. Page: 1 of 8 Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

BOILER MECHANIC//SR. BOILER MECHANIC

BOILER MECHANIC//SR. BOILER MECHANIC WORKING IN STEAM MANHOLES Activity Hazard Identification Required Precautions 1. Driving to and from work site. 1. Motor vehicle accident; striking pedestrians, bicyclists, or individuals using rollerblades.

More information

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions

VS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures

More information

SUBSTATION MAINTENANCE ELECTRICAL OPERATING PROCEDURE

SUBSTATION MAINTENANCE ELECTRICAL OPERATING PROCEDURE Page 1 of 6 A. PURPOSE AND SCOPE This procedure establishes safe working practices for handling sulfur hexafluoride (SF 6 ) gas and release minimization practices. This document also specifies methods

More information

Working in Gas Hazard Areas

Working in Gas Hazard Areas / Health & Safety OPERATIONS STANDARDS Ref.: Aperam Safety ST 012 Working in Gas Hazard Areas Issue: 15.05.2012 Vers.: v0 Rev.: AM Safety ST 012 v1.2 08.05.2012 Working in Gas Hazard Areas Controlled Updated

More information

Permit-To-Work Guidance and Templates

Permit-To-Work Guidance and Templates Managing Contractors Policy - Appendix E Permit-To-Work Guidance and Templates This document has been constructed to provide guidance in how to use a permit to work correctly. The first part explains the

More information

SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6 Samark North Qld Pty Ltd SWMS SWMS No 0 Samark North Qld Pty Ltd ABN : 99 08 98 87 Electrical Contractors License C37 Page of 6 Safe Work Method Statement Title: SWMS:0 INSTALLING LIGHT POLES Work Method

More information

SAFETY DATA SHEET Resiblock Indian Sandstone Sealer Invisible

SAFETY DATA SHEET Resiblock Indian Sandstone Sealer Invisible SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER EMERGENCY TELEPHONE Resiblock Ltd Archers

More information

IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions

IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions 0575050/2 IM-P057-04 CH Issue 2 IX1 Spirax-Monnier International Compressed Air Filter Installation and Maintenance Instructions 1 Safety information 2 General product information 3 Installation and commissioning

More information

BUTANE TS-MSDS 44 1 IDENTIFICATION OF THE SUBSTANCE & OF THE COMPANY / UNDERTAKING IDENTIFICATION OF THE SUBSTANCE OR PREPARATION:

BUTANE TS-MSDS 44 1 IDENTIFICATION OF THE SUBSTANCE & OF THE COMPANY / UNDERTAKING IDENTIFICATION OF THE SUBSTANCE OR PREPARATION: Total UK Ltd. MATERIAL SAFETY DATA SHEET BUTANE 1 IDENTIFICATION OF THE SUBSTANCE & OF THE COMPANY / UNDERTAKING Butane IDENTIFICATION OF THE SUBSTANCE OR PREPARATION: A liquified petroleum gas with applications

More information

Risk assessment. Assessment details. Task. Introduction. Please complete the form as fully and accurately as you can. Assessors job title

Risk assessment. Assessment details. Task. Introduction. Please complete the form as fully and accurately as you can. Assessors job title Risk assessment Introduction Please complete the form as fully and accurately as you can. Assessment details Name of organisation Assessor's name Assessors job title Any Company John Smith Manager Date

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

OSHA Federal Standards October 1, 2016 September 30, 2017

OSHA Federal Standards October 1, 2016 September 30, 2017 OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION

More information

CHAPTER 26 WELDING AND CUTTING

CHAPTER 26 WELDING AND CUTTING CHAPTER 26 WELDING AND CUTTING Revised 7/2010 1 WELDING AND CUTTING Responsibilities 1. The County Safety Officer is responsible for providing appropriate safety instructions for supervisor's use on welding

More information

24L AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: RANGER 7/240 PART NO: LS0913

24L AIR COMPRESSOR OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: RANGER 7/240 PART NO: LS0913 24L AIR COMPRESSOR MODEL NO: RANGER 7/240 PART NO: 2242000 OPERATION & MAINTENANCE INSTRUCTIONS LS0913 INTRODUCTION Thank you for purchasing this CLARKE 24L Air Compressor. Please read this manual fully

More information

24L AIR COMPRESSOR MODEL NO: TIGER 11/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13

24L AIR COMPRESSOR MODEL NO: TIGER 11/250 PART NO: OPERATION & MAINTENANCE INSTRUCTIONS LS01/13 24L AIR COMPRESSOR MODEL NO: TIGER 11/250 PART NO: 2244010 OPERATION & MAINTENANCE INSTRUCTIONS LS01/13 INTRODUCTION Thank you for purchasing this product. Before attempting to use this product, please

More information

SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE

SAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included

More information

Lecture Demonstrations Safety Manual & New Staff Induction

Lecture Demonstrations Safety Manual & New Staff Induction Lecture Demonstrations Safety Manual & New Staff Induction Overview The lecture demonstrations team provides and maintains demonstrations to lectures, tutorials and outreach. Demonstrations and equipment

More information

U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL

U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL SAFE -14 Page 1 of 8 U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL FUNCTION Safety TOPIC Hotwork Permit Program OBJECTIVE(S): GENERAL POLICY: To provide a work atmosphere that is conducive to

More information

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY TRENDICOTE, TRENDICOTE/60, & TRENDICOTE/15

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY TRENDICOTE, TRENDICOTE/60, & TRENDICOTE/15 PAGE 1 of 8 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY Product name: Product ref: Application: Suppliers trade name: Supplier: Trendicote PTFE Pure Dry Lubricant, /60, & /15 PTFE

More information

Chapter 2 Preparations for Tank Cleaning Work

Chapter 2 Preparations for Tank Cleaning Work Chapter 2 Preparations for Tank Cleaning Work Preparatory Procedures for Tank Cleaning Work Make preparations for tank cleaning work according to the procedures given below. 1. Formulating the tank cleaning

More information

STCW Code Table A-V/1-1-1 Specification of minimum standard of competence in basic training for oil and chemical tanker cargo operations

STCW Code Table A-V/1-1-1 Specification of minimum standard of competence in basic training for oil and chemical tanker cargo operations STCW Code Table A-V/1-1-1 Specification of minimum standard of in basic for oil and chemical tanker cargo operations Ref: https://www.edumaritime.net/stcw-code Source: IMO Contribute to Basic knowledge

More information

Safe Work Practices / Procedures / Instruction CONFINED SPACE

Safe Work Practices / Procedures / Instruction CONFINED SPACE CONFINED SPACE Entry into and work in a confined space poses health and safety problems which may include: Presence or possible build up of a hazardous atmosphere Unexpected movement of equipment or materials

More information

Compressed Gases Storage and Handling Safety Policy. Individual Unit Function: Safety Procedure No.: SOP-0103 Page: 1 of 6

Compressed Gases Storage and Handling Safety Policy. Individual Unit Function: Safety Procedure No.: SOP-0103 Page: 1 of 6 Procedure No.: SOP-0103 Page: 1 of 6 MIDGA Reviewed: 07/09/18 Effective: 1/14/98 Supersedes: Original Preparer: Owner: Approver: Safety Safety Safety 1. PURPOSE The purpose of this procedure is to establish

More information

CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT. Number: 2015 IFC Effective Date: February 1, 2017 Page 1 of 5

CITY AND COUNTY OF DENVER POLICY DENVER FIRE DEPARTMENT. Number: 2015 IFC Effective Date: February 1, 2017 Page 1 of 5 Subject: COMPRESSED GAS Reference: IFC, Denver Amendments, NFPA Approved: Manuel Almaguer Division Chief, Fire Prevention Division Number: 2015 IFC- 5301-1 Effective Date: February 1, 2017 Page 1 of 5

More information

Temporary load-bearing support for structural alterations or repairs

Temporary load-bearing support for structural alterations or repairs CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal

More information

5.0 Store. safely IN THIS SECTION: 5.1 Decanting or transferring

5.0 Store. safely IN THIS SECTION: 5.1 Decanting or transferring 5.0 Store hazardous substances safely IN THIS SECTION: 5.1 Decanting or transferring hazardous substances 5.2 Incompatibles 5.3 Store only what you need, store it safely 5.4 Gas cylinders 5.5 Oxy-acetylene

More information

WLPGA East African Summit

WLPGA East African Summit WLPGA East African Summit Good Practices Daniel Minda Mayieka Specialties Manager Total Kenya Limited Business Model Premise We respect the laws, rules and regulations of the countries in which we operate

More information

NZQA Expiring unit standard version 7 Page 1 of 8. Demonstrate knowledge of safe working practices in telecommunications.

NZQA Expiring unit standard version 7 Page 1 of 8. Demonstrate knowledge of safe working practices in telecommunications. Page 1 of 8 Title Demonstrate knowledge of safe working practices in telecommunications Level 2 Credits 4 Purpose This unit standard covers basic instruction in safe working practices in the telecommunications

More information

STORM WATER RETENTION TANKS MAINTENANCE INFORMATION FOR HEALTH AND SAFETY FILE

STORM WATER RETENTION TANKS MAINTENANCE INFORMATION FOR HEALTH AND SAFETY FILE STORM WATER RETENTION TANKS MAINTENANCE INFORMATION FOR HEALTH AND SAFETY FILE As required under the Construction (Design and Management) Regulations 1994 STORM WATER RETENTION (DRAINAGE) TANKS The information

More information

Safety Data Sheet according to Regulation (EC) No. 1907/2006. Revision date: Revision no.: 1,10

Safety Data Sheet according to Regulation (EC) No. 1907/2006. Revision date: Revision no.: 1,10 GEA Farm Technologies Safety Data Sheet according to Regulation (EC) No. 1907/2006 Print date: 1. Identification of the substance/mixture and of the company/undertaking Identification of the substance

More information

Hot Work Program. California State University, Chico. Department of Environmental Health and Safety

Hot Work Program. California State University, Chico. Department of Environmental Health and Safety California State University, Chico Department of Environmental Health and Safety May 2017 Table of Contents Section 1.0 Introduction... 1-1 2.0 Definitions... 2-1 3.0 Hot Work Precautions and Procedures...

More information

General Safety and Health Provisions for Construction Self Inspection Checklist

General Safety and Health Provisions for Construction Self Inspection Checklist Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: General Safety and Health Provisions for Construction Self Inspection Checklist Instructions:

More information

Welding, Cutting, and Brazing

Welding, Cutting, and Brazing Welding, Cutting, and Brazing Hazards of Welding Operations Fire hazards Metal splatter Electric shock Explosion hazards Released gases Radiant energy Where would these hazards be found on oil and gas

More information

Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type

Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree

More information

IMPERIAL CHEMICAL INDUSTRIES LIMITED PETROCHEMICAL DIVISION. SAFETY NEWSLETTER No. 55

IMPERIAL CHEMICAL INDUSTRIES LIMITED PETROCHEMICAL DIVISION. SAFETY NEWSLETTER No. 55 Page 1 IMPERIAL CHEMICAL INDUSTRIES LIMITED PETROCHEMICAL DIVISION SAFETY NEWSLETTER No. 55 55/1 IF A CONFINED SPACE CONTAINS POISONOUS GAS OR NITROGEN, MEN CAN BE AFFECTED SEVERAL FEET AWAY FROM AN OPEN

More information

Chapter 7. Coal Cargoes. Properties and Characteristics 7.1

Chapter 7. Coal Cargoes. Properties and Characteristics 7.1 Chapter 7 Coal Cargoes This chapter, and all of the chapters in Part 2, should be read in conjunction with the booklet Carrying Solid Bulk Cargoes Safely (Reference 16), published by Lloyd s Register/UK

More information

SAFETY DATA SHEET According to Regulation (EC) N 1907/2006

SAFETY DATA SHEET According to Regulation (EC) N 1907/2006 SAFETY DATA SHEET According to Regulation (EC) N 1907/2006 ProInert IG-541 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifier ProInert IG-541 Use of the

More information

General Precautions for handling compressed gases

General Precautions for handling compressed gases General Precautions for handling compressed gases Introduction Compressed gas cylinders can be extremely hazardous when misused or abused. Compressed gas cylinders can present a variety of hazards due

More information

Collision Repair Shop Inspection Checklist

Collision Repair Shop Inspection Checklist Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies

More information

TFS230 FLOOR STRIPPER OPERATION & MAINTENANCE

TFS230 FLOOR STRIPPER OPERATION & MAINTENANCE TFS230 FLOOR STRIPPER OPERATION & MAINTENANCE SAFETY General Information Thank you for your purchase of the Trelawny TFS230 Floor stripper. Before operating the TFS230 this manual must be read and understood

More information

Periodical surveys of cargo installations on ships carrying liquefied gases in bulk

Periodical surveys of cargo installations on ships carrying liquefied gases in bulk (June 1999) (Rev.1 Mar 2006) (Rev.2 May 2007) (Rev.3 Mar 2010) (Corr.1 Feb 2011) (Rev.4 Oct 2013) Periodical surveys of cargo installations on ships carrying liquefied gases in bulk 1 General 1.1 Scope

More information

HOT OILING OPERATIONS ALL HSE PRC 172. Approved By: Manager, HSE Performance Assurance. Table of Contents

HOT OILING OPERATIONS ALL HSE PRC 172. Approved By: Manager, HSE Performance Assurance. Table of Contents Owner: HSE Performance Assurance ALL HSE PRC 172 Approved By: Manager, HSE Performance Assurance Retention Code: CG01 CA Revised: March 2015 Review Frequency: Five years or less Table of Contents 1.0 Purpose...

More information

Material Handling and Storage of compressed gases and Air equipment

Material Handling and Storage of compressed gases and Air equipment Material Handling and Storage of compressed gases and Air equipment Compressed gases can be toxic, flammable, oxidizing, corrosive, inert, or some combination of these hazards. Compressed gas cylinders

More information

Insta-Brite Safety Data Sheet

Insta-Brite Safety Data Sheet Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : 74314 1.2. Relevant identified

More information

Electrical Machines & Drives Group Safety Policy 2018/2019

Electrical Machines & Drives Group Safety Policy 2018/2019 Electronic & Electrical Engineering. Electrical Machines & Drives Group Safety Policy 2018/2019 1 Introduction This Safety Policy provides the safety information and procedures that must be followed to

More information

SSR Competency Assurance Guidance Booklet No.2 (SSR Summary for Contractors CP) Revision 0 October 2014 HSEQ Department, TRANSCO

SSR Competency Assurance Guidance Booklet No.2 (SSR Summary for Contractors CP) Revision 0 October 2014 HSEQ Department, TRANSCO SSR Competency Assurance Guidance Booklet No.2 (SSR Summary for Contractors CP) Revision 0 October 2014 HSEQ Department, TRANSCO Disclaimer: This document is for general guidance and awareness purposes

More information

CONTRACTOR SAFETY RULES

CONTRACTOR SAFETY RULES CONTRACTOR SAFETY RULES CONTRACTOR SAFETY RULES AND REGULATIONS This manual sets forth policy with regards to contractor safety. Each Quinn facility consists of one or several diverse operations under

More information

Contractor OHS Induction. AOHS-05-GUI September 2016

Contractor OHS Induction. AOHS-05-GUI September 2016 Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water

More information

Control of Energy - Isolation Process

Control of Energy - Isolation Process Issue Date: 24/03/17 Last Reviewed: 24/03/17 Next Review Date: 24/03/18 Authorised By: Mike Muir Safe Operating Procedure Control of Energy - Isolation Process Purpose: This SOP is based on a Generic 12-step

More information

ROYCO 782 PRF Lubricant Hydraulic fluid

ROYCO 782 PRF Lubricant Hydraulic fluid Print Date: 06/ 13/2009 The recipient of this Safety Data Sheet is urged to study it carefully to become aware of hazards, if any, of the product involved. In the interest of safety you should (1) notify

More information

Self Inspection Checklist

Self Inspection Checklist Self Inspection Checklist Name: Date: Job Name: Title: Time: Job Number: Instructions: Review each lettered subpart under each section that you are responsible for completing. If you have inspected all

More information

HEALTH AND SAFETY MANUAL

HEALTH AND SAFETY MANUAL HEALTH AND SAFETY MANUAL Title: Abrasive Blasting Approved by: Greg Savoy Rev. 11/1/08 1 Purpose/Scope: The purpose of this program is to provide safe guidelines for the operation and maintenance of abrasive

More information

Striking an underground pipeline or underground electric line can lead to serious injury or death. If you hit either, call (800) , even if

Striking an underground pipeline or underground electric line can lead to serious injury or death. If you hit either, call (800) , even if 1 Striking an underground pipeline or underground electric line can lead to serious injury or death. If you hit either, call (800) 477-5050, even if there is no apparent damage. Call 911 if gas is blowing

More information