Transcription

1 EXPERTISE QUALITY COMMITMENT

2 GENERAL INFORMATION INDUSTRIAL ACCESSORIES EXPERTISE. QUALITY. COMMITMENT. QUARRY MINING has been setting the industry standard for over 30 years in the design and manufacture of quality, custom made drilling consumables. Over that time we have grown to become a preferred supplier to some of the biggest names in the Australian Mining, Construction and Tunnelling industries as well as exporting our equipment into Asia, South America and New Zealand. We manufacture a wide range of products to meet all your hard rock and soft rock drilling challenges. Our products are made using the latest technology and the highest quality materials available, including Tungsten Carbide, Poly Crystalline Diamond and high grade steels to ensure you get the best results across a range of drilling conditions. We work together with you to ensure you always get the exact part needed to get the job done efficiently and cost effectively. Our technical team is available to go on site and customise drilling equipment to meet the specific requirements of the job, to maximise the productivity and the cost effectiveness of your project. New South Wales 9/14 Yangan Drive, Beresfield NSW 2322 ph: +61 (0) fax: +61 (0) e: orders@quarrymining.com Distribution Warehouse - Sydney 99 Miller Road, Villawood NSW 2163 Queensland ph: e: orders@quarrymining.com 5/35 Iridium Drive, Mackay QLD 4740 ph: +61 (0) fax: +61 (0) e: ordersqld@quarrymining.com UNDERGROUND MINING CIVIL INFRASTRUCTURE TUNNELLING CONTENTS General Information 2 Claw Couplings 4 Type A 4 Type S 6 Hoses 8 Hose Accessories 10 Lubricators 11 Camlocks 12 Clamps 19 Bandit System 25 Pipe Fittings - Gal Mal 27 Pipe Fittings - Black Steel 34 Valves 41 Accessories 48 Manifolds 51

3 Claw Couplings Claw Couplings TYPE A TYPE A ZP Steel ZP Steel Threaded Male Connector 3 Way SIZE (BSP) 3/8 DX /2 DX SIZE (RANGE) 10 to 32 DX /4 DX DX ZP Steel Blanking End Claw Couplings ZP Steel Threaded Female SIZE (BSP) 3/8 DX /2 DX /4 DX DX to 76 DX to 32 CACSS (Stainless) Seal Type A Standard Claw Couplings SIZE (RANGE) ZP Steel 10 to 32 DX-AWR4 Hosetail Steel Plated 10 DX DX D Clip 19 DX DX DX SIZE (RANGE) 10 to 76 DX QUARRY MINING INDUSTRIAL ACCESSORIES 5

4 Claw Couplings Claw Couplings TYPE S TYPE S ZP Steel ZP Steel Threaded Male Connector 3 Way SIZE (BSP) SIZE (RANGE) 3/8 DX to 51 DX /2 DX /4 DX DX DX DX ZP Steel Blanking End SIZE (RANGE) Claw Couplings ZP Steel Threaded Female SIZE (BSP) 3/8 DX /2 DX /4 DX to 25 DX Seal Bellows Claw Couplings 1 DX DX DX SIZE (RANGE) 10 to 25 DX to 51 DX DX ZP Steel Hosetail HOSETAIL (mm) 12 DX DX DX DX DX QUARRY MINING INDUSTRIAL ACCESSORIES 7

5 Hoses Hoses HOSES HOSES Air / Water (Yellow) 20m Multi-Purpose (Red) 20m Rubber - 20bar / 290PSI c/w Type A Claw & Clamps Rubber - 20bar / 290PSI c/w Type A Claw & Clamps 12 HOSE-RD12012-C 19 HOSE-RD12019-C 25 HOSE-RD12025-C 51 HOSE-RD12051-C 12 HOSE-RD31012-C 19 HOSE-RD31019-C 25 HOSE-RD31025-C 51 HOSE-RD31051-C Layflat (Blue) 100m PVC Dust Extraction - per metre Rubber Hoses 25 HOSE-LFD HOSE-LFD HOSE-LFD HOSE-LFD HOSE-RS HOSE-RS83152 Hoses Y-Piece (Yellow) Suction (Grey) 20m Rubber - 20bar / 290PSI c/w Type A Claw & Clamps PVC *available fitted with camlocks 25 x 25 x 12 Y-PIECE-HOSE 25 HOSE-PS HOSE-PS HOSE-PS HOSE-PS QUARRY MINING INDUSTRIAL ACCESSORIES 9

6 Hose Accessories Lubricators WHIPCHECKS LUBRICATORS Whipcheck Adjustable Jet Oil Lubricator Suitable for U/G use Aluminium (HOSE OD) DX DX DX SIZE (Litres) 1.2 DX WHIP SOCKS Small In-line Oiler Hose Accessories Whip Sock Double Eye ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK ACC-WHIPSOCK Aluminium SIZE (ml) 150 PRH-I-L-OILER Lubricators 10 QUARRY MINING INDUSTRIAL ACCESSORIES 11

7 Camlocks Camlocks CAMLOCKS CAMLOCKS Adaptor x BSP Female Coupler x BSP Male Type A Type B Camlocks SIZE (ADAPTOR) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-A CMLK-SS-015-A 20 CMLK-AL-020-A CMLK-SS-020-A 25 CMLK-AL-025-A CMLK-SS-025-A 32 CMLK-AL-032-A CMLK-SS-032-A 40 CMLK-AL-040-A CMLK-SS-040-A 50 CMLK-AL-050-A CMLK-SS-050-A 65 CMLK-AL-065-A CMLK-SS-065-A 80 CMLK-AL-080-A CMLK-SS-080-A 100 CMLK-AL-100-A CMLK-SS-100-A 125 CMLK-AL-125-A CMLK-SS-125-A 150 CMLK-AL-150-A CMLK-SS-150-A 200 CMLK-AL-200-A CMLK-SS-200-A To specify material, AL (aluminium) or SS (stainless steel) SIZE (COUPLER) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-B CMLK-SS-015-B 20 CMLK-AL-020-B CMLK-SS-020-B 25 CMLK-AL-025-B CMLK-SS-025-B 32 CMLK-AL-032-B CMLK-SS-032-B 40 CMLK-AL-040-B CMLK-SS-040-B 50 CMLK-AL-050-B CMLK-SS-050-B 65 CMLK-AL-065-B CMLK-SS-065-B 80 CMLK-AL-080-B CMLK-SS-080-B 100 CMLK-AL-100-B CMLK-SS-100-B 125 CMLK-AL-125-B CMLK-SS-125-B 150 CMLK-AL-150-B CMLK-SS-150-B 200 CMLK-AL-200-B CMLK-SS-200-B To specify material, AL (aluminium) or SS (stainless steel) Camlocks Coupler x Hosetail Type C SIZE (COUPLER) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-C CMLK-SS-015-C 20 CMLK-AL-020-C CMLK-SS-020-C 25 CMLK-AL-025-C CMLK-SS-025-C 32 CMLK-AL-032-C CMLK-SS-032-C 40 CMLK-AL-040-C CMLK-SS-040-C 50 CMLK-AL-050-C CMLK-SS-050-C 65 CMLK-AL-065-C CMLK-SS-065-C 80 CMLK-AL-080-C CMLK-SS-080-C 100 CMLK-AL-100-C CMLK-SS-100-C 125 CMLK-AL-125-C CMLK-SS-125-C 150 CMLK-AL-150-C CMLK-SS-150-C 200 CMLK-AL-200-C CMLK-SS-200-C To specify material, AL (aluminium) or SS (stainless steel) 12 QUARRY MINING INDUSTRIAL ACCESSORIES 13

8 Camlocks Camlocks CAMLOCKS CAMLOCKS Coupler x BSP Female Adaptor x BSP Male Type D Type F SIZE (COUPLER) (ALUMINIUM) (STAINLESS) SIZE (ADAPTOR) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-D CMLK-SS-015-D 15 CMLK-AL-015-F CMLK-SS-015-F 20 CMLK-AL-020-D CMLK-SS-020-D 20 CMLK-AL-020-F CMLK-SS-020-F 25 CMLK-AL-025-D CMLK-SS-025-D 25 CMLK-AL-025-F CMLK-SS-025-F 32 CMLK-AL-032-D CMLK-SS-032-D 32 CMLK-AL-032-F CMLK-SS-032-F 40 CMLK-AL-040-D CMLK-SS-040-D 40 CMLK-AL-040-F CMLK-SS-040-F 50 CMLK-AL-050-D CMLK-SS-050-D 50 CMLK-AL-050-F CMLK-SS-050-F 65 CMLK-AL-065-D CMLK-SS-065-D 65 CMLK-AL-065-F CMLK-SS-065-F 80 CMLK-AL-080-D CMLK-SS-080-D 80 CMLK-AL-080-F CMLK-SS-080-F 100 CMLK-AL-100-D CMLK-SS-100-D 100 CMLK-AL-100-F CMLK-SS-100-F 125 CMLK-AL-125-D CMLK-SS-125-D 125 CMLK-AL-125-F CMLK-SS-125-F 150 CMLK-AL-150-D CMLK-SS-150-D 150 CMLK-AL-150-F CMLK-SS-150-F Camlocks 200 CMLK-AL-200-D CMLK-SS-200-D To specify material, AL (aluminium) or SS (stainless steel) 200 CMLK-AL-200-F CMLK-SS-200-F To specify material, AL (aluminium) or SS (stainless steel) Camlocks Adaptor x Hosetail Coupler Dust Cap Type E Type DC SIZE (COUPLER) (ALUMINIUM) (STAINLESS) SIZE (COUPLER) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-E CMLK-SS-015-E 15 CMLK-AL-015-DC CMLK-SS-015-DC 20 CMLK-AL-020-E CMLK-SS-020-E 20 CMLK-AL-020-DC CMLK-SS-020-DC 25 CMLK-AL-025-E CMLK-SS-025-E 25 CMLK-AL-025-DC CMLK-SS-025-DC 32 CMLK-AL-032-E CMLK-SS-032-E 32 CMLK-AL-032-DC CMLK-SS-032-DC 40 CMLK-AL-040-E CMLK-SS-040-E 40 CMLK-AL-040-DC CMLK-SS-040-DC 50 CMLK-AL-050-E CMLK-SS-050-E 50 CMLK-AL-050-DC CMLK-SS-050-DC 65 CMLK-AL-065-E CMLK-SS-065-E 65 CMLK-AL-065-DC CMLK-SS-065-DC 80 CMLK-AL-080-E CMLK-SS-080-E 80 CMLK-AL-080-DC CMLK-SS-080-DC 100 CMLK-AL-100-E CMLK-SS-100-E 100 CMLK-AL-100-DC CMLK-SS-100-DC 125 CMLK-AL-125-E CMLK-SS-125-E 125 CMLK-AL-125-DC CMLK-SS-125-DC 150 CMLK-AL-150-E CMLK-SS-150-E 150 CMLK-AL-150-DC CMLK-SS-150-DC 200 CMLK-AL-200-E CMLK-SS-200-E 200 CMLK-AL-200-DC CMLK-SS-200-DC To specify material, AL (aluminium) or SS (stainless steel) To specify material, AL (aluminium) or SS (stainless steel) 14 QUARRY MINING INDUSTRIAL ACCESSORIES 15

9 Camlocks Camlocks CAMLOCKS CAMLOCK ADAPTORS Adaptor Dust Plug Adaptor x Adaptor Type DP Type AA SIZE (COUPLER) (ALUMINIUM) (STAINLESS) SIZE (COUPLER) SIZE (ADAPTOR) (ALUMINIUM) (STAINLESS) 15 CMLK-AL-015-DP CMLK-SS-015-DP CMLK-AL-050-A-A CMLK-SS-050-A-A 20 CMLK-AL-020-DP CMLK-SS-020-DP CMLK-AL-032-A-A CMLK-SS-032-A-A 25 CMLK-AL-025-DP CMLK-SS-025-DP CMLK-AL-040-A-A CMLK-SS-040-A-A 32 CMLK-AL-032-DP CMLK-SS-032-DP CMLK-AL-050-A-A CMLK-SS-050-A-A 40 CMLK-AL-040-DP CMLK-SS-040-DP CMLK-AL-065-A-A CMLK-SS-065-A-A 50 CMLK-AL-050-DP CMLK-SS-050-DP CMLK-AL-080-A-A CMLK-SS-080-A-A 65 CMLK-AL-065-DP CMLK-SS-065-DP CMLK-AL-100-A-A CMLK-SS-100-A-A 80 CMLK-AL-080-DP CMLK-SS-080-DP 100 CMLK-AL-100-DP CMLK-SS-100-DP To specify material, AL (aluminium) or SS (stainless steel) 125 CMLK-AL-125-DP CMLK-SS-125-DP Camlocks 150 CMLK-AL-150-DP CMLK-SS-150-DP 200 CMLK-AL-200-DP CMLK-SS-200-DP To specify material, AL (aluminium) or SS (stainless steel) Coupler x Adaptor Type DA Camlocks SIZE (COUPLER) SIZE (ADAPTOR) (ALUMINIUM) (STAINLESS) CMLK-AL-4025-D-A CMLK-SS-4025-D-A 50 CMLK-AL-5025-D-A CMLK-SS-5025-D-A CMLK-AL-5040-D-A CMLK-SS-5040-D-A 80 CMLK-AL-5080-D-A CMLK-SS-5080-D-A 100 CMLK-AL D-A CMLK-SS D-A CMLK-AL-8040-D-A CMLK-SS-8040-D-A 50 CMLK-AL-8050-D-A CMLK-SS-8050-D-A 100 CMLK-AL D-A CMLK-SS D-A CMLK-AL D-A CMLK-SS D-A 65 CMLK-AL D-A CMLK-SS D-A 80 CMLK-AL D-A CMLK-SS D-A 150 CMLK-AL D-A CMLK-SS D-A CMLK-AL D-A CMLK-SS D-A To specify material, AL (aluminium) or SS (stainless steel) 16 QUARRY MINING INDUSTRIAL ACCESSORIES 17

10 Camlocks Clamps CAMLOCK ADAPTORS Coupler x Coupler Type DD SIZE (COUPLER) SIZE (ADAPTOR) (ALUMINIUM) (STAINLESS) CMLK-AL-040-D-D CMLK-SS-040-D-D CMLK-AL-050-D-D CMLK-SS-050-D-D CMLK-AL-065-D-D CMLK-SS-065-D-D CMLK-AL-080-D-D CMLK-SS-080-D-D CMLK-AL-100-D-D CMLK-SS-100-D-D To specify material, AL (aluminium) or SS (stainless steel) HIGH PRESSURE CLAMPS Claw Clamps SIZE (HOSE ID) SIZE (RANGE) DX DX DX DX DX Double Bolt Standard Camlocks SIZE (RANGE) CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB CLAMP-DB-1700 Clamps 18 QUARRY MINING INDUSTRIAL ACCESSORIES 19

11 Clamps Clamps VICTAULIC SUPER CLAMPS Victaulic ZP Steel Clamps Shouldered SIZE (NOM) SIZE (PIPE DIA.) DX DX DX DX DX DX DX DX DX DX DX DX Victaulic Quick Release SIZE (NOM) SIZE (PIPE DIA.) DX G DX G DX G DX G DX G SIZE (BAND) SIZE (RANGE) CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS CLAMP-MAX-ZPS-278 Clamps 20 QUARRY MINING INDUSTRIAL ACCESSORIES 21

12 Clamps Clamps SUPER CLAMPS WORM DRIVE CLAMPS Stainless Steel Non Perforated Band Clamps SIZE (BAND) SIZE (RANGE) CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS CLAMP-MAX-SS-330 All Steel SIZE (BAND) SIZE (RANGE) CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS CLAMP-WD-ZPS-300 Clamps 22 QUARRY MINING INDUSTRIAL ACCESSORIES 23

13 Clamps Bandit System WORM DRIVE CLAMPS BANDING STRAP SYSTEM Non Perforated Band Band All Stainless Grade 430 SIZE (BAND) CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS-025 SIZE (BAND) SIZE (COIL) BAND-STRAP BAND-STRAP BAND-STRAP CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS-060 Buckles CLAMP-WD-SS-070 Clamps CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS CLAMP-WD-SS-110 SIZE (BAND) 12.7 BANDIT-BUCK BANDIT-BUCK BANDIT-BUCK-020 Bandit System Tool Hand Tool - Standard SIZE Standard BAND-TOOL 24 QUARRY MINING INDUSTRIAL ACCESSORIES 25

14 Bandit System Pipe Fittings - Gal Mal CENTRE PUNCH SYSTEM GALVANISED MALLEABLE IRON Centre Punch Clamps Nipples Bandit System SIZE (BAND) SIZE (ID) 16 x 0.7mm 25.4 CENPUN-CL CENPUN-CL CENPUN-CL-076 Preform Clamps SIZE (BAND) SIZE (ID) CLAMP-BAND-SS CLAMP-BAND-SS CLAMP-BAND-SS CLAMP-BAND-SS CLAMP-BAND-SS-76 Tool CENPUN-TOOL Reducing Nipples 6 FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIP-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM FIT-NIPRD-GM METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) Pipe Fittings - Gal Mal 26 QUARRY MINING INDUSTRIAL ACCESSORIES 27

15 Pipe Fittings - Gal Mal Pipe Fittings - Gal Mal GALVANISED MALLEABLE IRON GALVANISED MALLEABLE IRON Sockets Elbow 6 FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM FIT-SOC-GM-150 Female 90 6 FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM FIT-EL90-FF-GM-100 Pipe Fittings - Gal Mal Reducing Sockets FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM FIT-SOCRD-GM METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) Reducing Elbows Female FIT-EL90-FF-GM FIT-EL90-FF-GM Elbow Male x Female FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM FIT-EL90-MF-GM-100 Pipe Fittings - Gal Mal 28 QUARRY MINING INDUSTRIAL ACCESSORIES 29

16 Pipe Fittings - Gal Mal Pipe Fittings - Gal Mal GALVANISED MALLEABLE IRON GALVANISED MALLEABLE IRON Equal Tees Hex Reducing Bush Pipe Fittings - Gal Mal 6 FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM FIT-TEE-GM-150 Unequal Tees FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM FIT-TEERD-GM METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) 10-6 FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM FIT-BRED-GM Pipe Fittings - Gal Mal 30 QUARRY MINING INDUSTRIAL ACCESSORIES 31

17 Pipe Fittings - Gal Mal Pipe Fittings - Gal Mal GALVANISED MALLEABLE IRON GALVANISED MALLEABLE IRON Cross Plug Pipe Fittings - Gal Mal Male x Female FIT-X-GM FIT-X-GM FIT-X-GM FIT-X-GM FIT-X-GM FIT-X-GM-050 Cap 4 FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM FIT-CAP-GM-150 METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) 4 FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM FIT-PLUG-GM-150 Union Female 15 FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM FIT-UN-GM-100 Pipe Fittings - Gal Mal 32 QUARRY MINING INDUSTRIAL ACCESSORIES 33

18 Pipe Fittings - Black Steel Pipe Fittings - Black Steel BLACK STEEL BLACK STEEL Nipples Socket and Reducing Sockets Pipe Fittings - Black Steel 4 FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS FIT-NIP-BS-100 Reducing Nipples 6-4 FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS FIT-NIPRD-BS METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) 4 FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS FIT-SOC-BS-150 Reducing Sockets 6-4 FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS FIT-SOCRD-BS Pipe Fittings - Black Steel 34 QUARRY MINING INDUSTRIAL ACCESSORIES 35

19 Pipe Fittings - Black Steel Pipe Fittings - Black Steel BLACK STEEL BLACK STEEL Equal Tees Elbow Pipe Fittings - Black Steel Unequal Tees 4 FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEE-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS FIT-TEERD-BS METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) Female 90 Elbow Male x Female 90 4 FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-FF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS FIT-EL90-MF-BS-100 Pipe Fittings - Black Steel 36 QUARRY MINING INDUSTRIAL ACCESSORIES 37

20 Pipe Fittings - Black Steel Pipe Fittings - Black Steel BLACK STEEL BLACK STEEL Hex Reducing Bush Cross Pipe Fittings - Black Steel 6-4 FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS FIT-BRED-BS METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) Plug 6 FIT-X FIT-X FIT-X FIT-X FIT-X FIT-X FIT-X FIT-X FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS FIT-PLUG-BS-100 Pipe Fittings - Black Steel 38 QUARRY MINING INDUSTRIAL ACCESSORIES 39

21 Pipe Fittings - Black Steel Valves BLACK STEEL BALL VALVES Cap Lever Operated Female x Female 6 FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS FIT-CAP-BS VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB-050 Pipe Fittings - Black Steel Union Female 6 FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS FIT-UN-FF-BS-100 METRIC (mm) 6 1/4 10 3/8 15 1/2 20 3/ / / / BSP (inches) 65 VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB VAL-BALL-BSP-NPB-100 Lockable (Nickel-plated Brass) Female x Female 15 VAL-BALL-BSP-NPB-015L 20 VAL-BALL-BSP-NPB-020L 25 VAL-BALL-BSP-NPB-025L 32 VAL-BALL-BSP-NPB-032L 40 VAL-BALL-BSP-NPB-040L 50 VAL-BALL-BSP-NPB-050L 65 VAL-BALL-BSP-NPB-065L 80 VAL-BALL-BSP-NPB-080L 100 VAL-BALL-BSP-NPB-100L Valves 40 QUARRY MINING INDUSTRIAL ACCESSORIES 41

22 Valves Valves BALL VALVES Lockable (Stainless Steel) Female x Female 6 VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS VAL-BALL-BSP-SS-100 ECONOVALVE 25 DX (BSP F - BSP F) 25 DX (BSP F - TYPE A) 25 DX (TYPE A -TYPE A) 50 DX (BSP F - BSP F) Valves Compact - T Handle (Nickel-Plated Brass) Female x Female Valves 6 VAL-BALL-BSP-NPB-06T 10 VAL-BALL-BSP-NPB-10T 15 VAL-BALL-BSP-NPB-15T 20 VAL-BALL-BSP-NPB-20T 25 VAL-BALL-BSP-NPB-25T 42 QUARRY MINING INDUSTRIAL ACCESSORIES 43

23 Valves Valves CHECK VALVES Swing Check Brass Seat 15 VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR VAL-SWCH-BR-100 FOOT VALVE Foot Valve 15 VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR VAL-FOOT-BR-100 Valves Spring Check Valves 10 VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR VAL-SPCH-BR QUARRY MINING INDUSTRIAL ACCESSORIES 45

24 Valves Valves BUTTERFLY VALVES GATE VALVES Wafer Gate Valve Female BSP 50 VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-BF-W-SS VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR VAL-GATE-BSP-BR-100 Valves Lugged - ANSI 150 Y-STRAINERS Valves 50 VAL-BF-L-SS VAL-BF-L-SS VAL-BF-L-SS-080 Inline Strainer Y-type 100 VAL-BF-L-SS VAL-BF-L-SS FIT-STY-BR FIT-STY-BR FIT-STY-BR FIT-STY-BR FIT-STY-BR FIT-STY-BR QUARRY MINING INDUSTRIAL ACCESSORIES 47

25 Accessories Accessories Brattice 50 m roll WIDTH (mm) 3700 BRATTICE BRATTICE-4750 Pogo Sticks CONTRACTED HEIGHT EXTENDED HEIGHT ACC-POGO ACC-POGO Cable Straps LENGTH (mm) COLOUR 400 White/reflective CAB-ST-0400-R 450 Green CAB-ST Red CAB-ST White CAB-ST Blue CAB-ST-1200 Strainers 51 STRAINER-50-BOX-G 51 STRAINER-50-3-SS 51 STRAINER-50-RUBBER Accessories Scaling Bars Aluminium Bulk Bags ACC-BULKA-90X90X120 DESCRIPTION Bulk Bag with plastic liner top and bottom spout. SWL 1250kg Accessories 1500 DX DX DX DX DX Pelican Picks DX DESCRIPTION Pelican pick Scaling Bars Alloy Steel 1200 DX DX DX DX Rock Bolt Wedges DESCRIPTION DX Diamond head rock wedge 48 QUARRY MINING INDUSTRIAL ACCESSORIES 49

26 Accessories Manifolds CLEAN OUT BALLS Clean Out Balls for Grout Line Foam (soft) SIZE (inches) 1" ACC-FOAM-BALL-025 2" ACC-FOAM-BALL-050 3" ACC-FOAM-BALL-075 4" ACC-FOAM-BALL-100 5" ACC-FOAM-BALL-125 6" ACC-FOAM-BALL-150 MANIFOLDS Galvanised Manifolds Custom galvanised manifolds made to order to suit any application. Any configuration of reducing adaptors, bends and elbows available. All manifolds can be made with shouldered and/or BSP screwed ends. Pick Removers Accessories PICK-REM-1 PICK-REM-1-75H DESCRIPTION Pick remover Pick remover 75 degree handle Manifolds 50 QUARRY MINING INDUSTRIAL ACCESSORIES 51

27

28

29

30 Lifepoint TM Rock Bolt Anchor Two person fall arrest anchor Rock Bolt Anchor is a two person fall arrest anchor that is designed Specifications Designed to the highest standards: Meets the requirements of AS/NZS :2009 Industrial Fall-Arrest Systems and Devices. Meets the requirements of AS/NZS 5532:2013 Manufacturing Requirements for Single point anchor device for harness-based work at height. When you install it you also test it The unique patented load-sensing washer indicates the complete anchor anchor point. This gives confidence that the bolts and rock bolt bonding s are also safe required for 2 person free fall arrest Manufactured in Australia under strict Quality accredited laboratory component of the design. The anchor point capability is verified via the unique patented load-sensing washer The most innovative, advanced and state-of-the-art anchor for use in today s demanding high-risk work environments. The ma The ongoing mandatory 12 monthly test requirements are now as simple as replacing the patented load sensing washer saving valuable money and Dimensions Length: 153mm Width: 75-90mm Height: 71mm Weight: 810 grams Material: High Tensile Metal Patent Applied For. Lifepoint range or to place an order, please contact our High Safety/High Risk Product Specialist, on: Lifepoint purposes only. Lifepoint reserves the right to update this document as required and takes no responsibility for, and will not be liable for any changes

31

32 Manifolds. Quarry Mining has been providing a wide range of quality products, service and support to the construction and mining industry for 30 years. We are committed to delivering ongoing solutions including on-site support, product trialling and procedures training. We have a diverse range of product lines to help you, whatever your field... QUALITY EXPERTISE VENTILATION FANS FOR HAZARDOUS ENVIRONMENTS 3 models available: AF250 9 kg Blade dia 250 mm Air Delivery 0.6 m3/sec Air Consumption 26 L/sec TOP HAMMER (HARD ROCK) CORING ROTARY (SOFT ROCK) INDUSTRIAL ACCESSORIES INNOVATION AF kg Blade dia 500 mm Air Delivery 3.4 m3/sec Air Consumption 70 L/sec AF600V 35 kg Blade dia 600 mm Air Delivery 5.5 m3/sec Air Consumption 40 L/sec EXPERTISE EXPERTISE YOU CAN DEPEND ON YOU CAN DEPEND ON 62 9/14 QUARRY NSW: YanganMINING Drive, Beresfield NSW 2322 ph: +61 (0) fax: +61 (0) e: orders@quarrymining.com QLD: 5/35 Iridium Drive, Paget QLD 4740 ph: +61 (0) fax: +61 (0) e: ordersqld@quarrymining.com INDUSTRIAL ACCESSORIES 63

33 New South Wales 9/14 Yangan Drive, Beresfield NSW 2322 ph: +61 (0) fax: +61 (0) e: Queensland 5/35 Iridium Drive, Mackay QLD 4740 ph: +61 (0) fax: +61 (0) e: Distribution Warehouse - Sydney 99 Miller Road, Villawood NSW 2163 ph: e: orders@quarrymining.com CAT-IA