Hilti HKD Submission Folder

Transcription

1 Hilti HKD Submission Folder Sample Submission and Approval Form 2-3 Product Information 4-6 Technical Data 7-12 Method Statement 13 Renaming of HKD-S Push-in Anchors 14 Country of Origin 15 Job Reference Make your submission simple! To download the most updated submission folders and technical manuals, visit Recycling one ton of paper saves 17 trees and 7000 gallons of water. Please consider your environmental responsibility before using the hard copy version! Customer Hotline Hong Kong Macau (Toll free) May 2016

2 SAMPLE SUBMISSION AND APPROVAL FORM Contract Title: Ref. No.: Date: Ref. No. of Previous Submission: Contract No: (1) File Reference: (2) DETAILS OF SUBMISSION To: Contract Manager s Representative Attention: From: The enclosed sample and catalogue* / certificate of origin* / technical data* / test report* / job reference* as described below have been checked for compliance with the Specifications and Drawings, and are submitted for approval. 1. General Information a. Material Description HKD-S / HKD-SHD / HKD-SR / HKD-E / HKD-ER / HKD-ST push-in anchor b. Location: c. Specification Ref. Page: Item: d. Drawing Ref. No. e. B.Q. Ref.No.: f. Anticipated date of approval: 2. Technical Information The submitted sample has been checked against the specification and drawings as listed below:- Specification Requirements a. Brand b. Country of Origin c. Manufacturer s Name & Address d. Factory s Name & Address(es) e. Supplier (with Applicator, if any) Hilti Republic of China Submitted Sample (State details against each item) Hilti Corporation, FL-9494 Principality of Liechtenstein Hilti (China Zhangjiang) Co Ltd, Yongping Road South, Zhangjiang Development Zone, Zhangjiang, Guangdong Province, China 2 May 2016 Page 1 of 2

3 f. Appearance g. Color + h. Specification i. Manufacturer s Catalogue j. Test Report (Original/Certificated True Copy) k. Previous Job Reference l. Supplementary Information Hilti (Hong Kong) Ltd According to the sample submitted NIL Attached Attached Attached Attached NIL For and on behalf of the Contractor (Quality Control Manager) CONTRACT MANAGER S COMMENTS To: From: Contract Manager s Representative: On the basis of the sample and information given, the above sample submitted is: (1) * Approved. (2) * Not approved because Remarks: Approval does not alter the requirements of the Contract Contract Manager s Representative: Date: cc. (* Delete if appropriate) (+ For glass or vitreous mosaic tiles, the contractor is required to confirm the colour range(s) of the submitted sample, i.e. a) light and or medium; or b) dark) 3 May 2016 Page 2 of 2

4 Anchor Systems Drop-in (flush) anchor HKD Base materials Concrete (uncracked) Applications For medium-duty loads with anchor bolts and threaded rods, e.g. suspension systems for pipes, air ducts, sprinkler systems, etc. For redundant applications in cracked concrete or single-point applications in uncracked concrete Approvals ETA ETA 02/0032 for HKD drop-in anchor (ETAG , Option 7) ETA, Fire resistance ETA 06/0047 for HKD drop-in anchor multiple applications (ETAG , Option -) Approvals and test reports may apply to selected products only. Please refer to the documents for details. Advantages Features a lip for flush setting, regardless of hole depth Shallow drilling depth (25mm), available in M6, M8, M10 and M12 sizes Visual check for correct setting when used with Hilti setting tool Technical data Material composition Head configuration Type of fastening (Galvanized) Steel, zinc-plated (min. 5 µm); (Sherardized) Steel, zinc-plated (min. 45 µm); (Stainless steel) Steel, A4 (SS316) Inner thread Pre-fastening These are abbreviated instructions which may vary according to the application. Always observe/follow the instructions accompanying the product or refer to 7 Approvals / test reports ETA, Fire, FM (Factory Mutual) Suitable for cracked concrete with redundant fastenings Yes Recommended load (kn), non-cracked concrete at 25N/mm², safety factor(g )=3 Model Anchor size M6x25/ 1/4"x25 M8x30/ 5/16"x30 M10x40/ 3/8"x40 M12x50/ 1/2"x50 M16x65/ 5/8"x65 M20x80 HKD Tensile Load, Nrec Shear Load, Vrec HKD- Tensile Load, Nrec SR/ HKD- ER Shear Load, Vrec Remarks: 1) All the data applies to no edge distance, spacing and other influences 2) For detail design method, please refer to Fastening Technology Manual Customer Hotline: Hong Kong Macau

5 Anchor Systems HKD (Galvanized version min. 5µm) Info Shop Ordering designation Anchor size Drill bit diameter Drilling depth Anchor length Anchorage depth Base plate clearance hole Max. tightening torque Internal thread size Sales pack quantity Item number HKD M6x25 M6 8 mm 27 mm 25 mm 25 mm 7 mm 4 Nm 6/12 mm 100 pc HKD M8x30 M8 10 mm 33 mm 30 mm 30 mm 9 mm 8 Nm 8/14 mm 100 pc HKD M10x40 M10 12 mm 43 mm 40 mm 40 mm 12 mm 15 Nm 10/18 mm 50 pc HKD M12x50 M12 15 mm 54 mm 50 mm 50 mm 14 mm 35 Nm 12/22 mm 50 pc HKD M16x65 M16 20 mm 70 mm 65 mm 65 mm 18 mm 60 Nm 16/30 mm 25 pc HKD M20x80 M20 25 mm 85 mm 80 mm 80 mm 22 mm 120 Nm 20/42 mm 25 pc HKD (Imperial, galvanized version min. 5µm) Info Shop Ordering designation Drill bit diameter Anchor length Drilling depth Anchorage depth Max. tightening torque Base plate clearance hole Internal thread size Sales pack quantity Item number HKD 1/4 x25 8 mm 25 mm 27 mm 25 mm 3 Nm 8 mm 6/12 mm 100 pc ) HKD 5/16 x30 10 mm 30 mm 33 mm 30 mm 7 Nm 10 mm 10/13 mm 100 pc ) HKD 3/8 x40 12 mm 40 mm 44 mm 40 mm 15 Nm 11 mm 12/16 mm 100 pc HKD 1/2 x50 16 mm 50 mm 55 mm 50 mm 30 Nm 14 mm 14/22 mm 50 pc HKD 5/8 x65 20 mm 65 mm 70 mm 65 mm 60 Nm 17 mm 18/28 mm 25 pc ) This is a non-stock item. For detailed lead time information please contact your Hilti representative. HKD-SAC (Sherardized version min. 45µm) Info Shop Ordering designation Drill bit diameter Drilling depth Anchor length Anchorage depth Base plate clearance hole Max. tightening torque Internal thread size Sales pack quantity Item number HKD-SAC M8X30 10 mm 33 mm 30 mm 30 mm 9 mm 8 Nm 8/14 mm 100 pc HKD-SAC M10X40 12 mm 43 mm 40 mm 40 mm 12 mm 15 Nm 10/18 mm 50 pc HKD-SAC M12X50 14 mm 54 mm 50 mm 50 mm 14 mm 35 Nm 12/22 mm 50 pc HKD-SAC M16X65 18 mm 70 mm 65 mm 65 mm 18 mm 60 Nm 16/30 mm 25 pc Hilti online:

6 Anchor Systems HKD-SR (Stainless steel A4) Info Shop Ordering designation Anchor size Drill bit diameter Drilling depth Anchor length Anchor depth Base plate clearance hole Max. tightening torque Internal thread size Sales pack quantity Item number HKD-SR M6x25 M6 8 mm 27 mm 25 mm 25 mm 7 mm 4 Nm 6/12 mm 100 pc HKD-SR M8x30 M8 10 mm 33 mm 30 mm 30 mm 9 mm 8 Nm 8/14 mm 100 pc HKD-SR M10x40 M10 12 mm 44 mm 40 mm 40 mm 12 mm 15 Nm 10/18 mm 50 pc HKD-SR M12x50 M12 15 mm 54 mm 50 mm 50 mm 14 mm 35 Nm 12/22 mm 50 pc HKD-SR M16x65 M16 20 mm 70 mm 65 mm 65 mm 18 mm 60 Nm 16/30 mm 25 pc HKD-SR M20x80 M20 25 mm 85 mm 80 mm 80 mm 22 mm 120 Nm 20/42 mm 25 pc HKD-ER (Without lip, stainless steel A4) Info Shop 7 Ordering designation Anchor size Drill bit diameter Drilling depth Anchor length Anchorage depth Base plate clearance hole Max. tightening torque Screw Depth Sales pack quantity Item number HKD-ER M8x30 M8 10 mm 33 mm 30 mm 30 mm 9 mm 8 Nm 10/13 mm 100 pc HKD-ER M10x40 M10 12 mm 44 mm 40 mm 40 mm 12 mm 15 Nm 12/16 mm 50 pc HKD-ER M12X50 M12 14 mm 50 mm 50 mm - 14 mm 35 Nm - 50 pc HKD-ER M16X65 M16 18 mm 70 mm 65 mm 65 mm 18 mm 60 Nm 18/28 mm 25 pc HKD-ER 5/16x30 10 mm 33 mm 30 mm 30 mm 10 mm 8 Nm 10/28 mm 100 pc ) 1) This is a non-stock item. For detailed lead time information please contact your Hilti representative. Customer Hotline: Hong Kong Macau

7 7 May 2016

8 8 May 2016

9 9 May 2016

10 10 May 2016

11 11 May 2016

12 12 May 2016

13 Hilti HKD Push-in Anchor SETTING OPERATION Hilti HKD Push-in Anchor Versions : HKD-S / HKD-SHD / HKD-SR / HKD-E / HKD-ER Accessories : Hilti HSD-G setting tool Reference : Product Information / Fastening Technology Manual Setting Operation: 1. Drill the hole with drill bit 2. Blow out dust and fragments 3. Install the anchor by HSD-G setting tool 4. Drive screw into anchor Customer Hotline: Hong Kong Macau (Mon Fri 8:30 am 6:00 pm / Sat 8:30 am 1:00 pm) Page 1 of 1 13 May 2016

14 14 May 2016

15 15 May 2016

16 Tower A, Manulife Fiancial Centre, 223 Wai Yip Street, Kwun Tong, Kwoloon, Hong Kong Hotline: Job / Application Reference Product Name: Flush anchor HKD 16 May 2016 Date Project Name Main Contractor Product Name Application Project Type:ASD Kai Tak Trade & Industry Tower 2015 工業及貿易發展局大樓 Dragages HKD Catchfence fixing 2015 Reprovisioning of Queen Elizabeth Hospital 伊利沙伯醫院 Yau Lee HKD Electrical services fixing Project Type:Buildings Mount Nicholson Road Residential Development 聶歌信山道 103 號住宅發展 Gammon HKD Temporary fixing 2015 New World Centre Redevelopment 新世界中心重建 New World HKD Air conditioner frame fixing 2015 New World Centre Redevelopment 新世界中心重建 New World HKD MVAC services fixing 2015 New World Centre Redevelopment 新世界中心重建 New World HKD Plumbing & drainage fixing 2015 SHK Ho Man Tin Fat Kwong St 何文田佛光街住宅發展 Sanfield HKD Electrical services fixing 2015 SHK TKO 66A Residential development 將軍澳 66A 住宅發展 Sanfield HKD Temporary fixing Project Type:Highway & CEDD 2015 Central Wan Chai By Pass 中環灣仔繞道 Multiple contractors HKD-SR Temporary fixing Project Type:HKAA 2015 Airport Development 機場主要發展 Gammon HKD Hand rail fixing 2015 Airport Development 機場主要發展 Gammon HKD Machine/Equipment fixng 2015 Airport Development 機場主要發展 Gammon HKD Temporary fixing 2015 Airport Development 機場主要發展 Gammon HKD-SR Signage fixing 2015 Airport Development 機場主要發展 Gammon HKD-SR Temporary fixing Project Type:Macau - Casino & Hotel 2015 Galaxy Mega Resort (Phase 2) 銀河渡假村二期 Hsin Chong HKD MVAC services fixing

17 Tower A, Manulife Fiancial Centre, 223 Wai Yip Street, Kwun Tong, Kwoloon, Hong Kong Hotline: Job / Application Reference Product Name: Flush anchor HKD 17 May 2016 Date Project Name Main Contractor Product Name Application Galaxy Mega Resort (Phase 2) 2015 銀河渡假村二期 Hsin Chong HKD Plumbing & drainage fixing 2015 Galaxy Mega Resort (Phase 2) 銀河渡假村二期 Hsin Chong HKD Suspended ceiling fixing 2015 Louis XIII Hotel Development 路易十三酒店發展 Paul Y HKD Electrical services fixing 2015 Louis XIII Hotel Development 路易十三酒店發展 Paul Y HKD Temporary fixing 2015 Macao Studio City 星麗門 Paul Y & Yau Lee JV HKD Electrical services fixing 2015 Macao Studio City 星麗門 Paul Y & Yau Lee JV HKD MVAC services fixing 2015 Macao Studio City 星麗門 Paul Y & Yau Lee JV HKD Others 2015 Macao Studio City 星麗門 Paul Y & Yau Lee JV HKD Suspended ceiling fixing 2015 Macao Studio City 星麗門 Paul Y & Yau Lee JV HKD-SR Plumbing & drainage fixing 2015 MGM Cotai 美高梅 ( 路氹發展 ) China State HKD Elevator fixing 2015 MGM Cotai 美高梅 ( 路氹發展 ) China State HKD Fire services fixing 2015 MGM Cotai 美高梅 ( 路氹發展 ) China State HKD Hand rail fixing 2015 MGM Cotai 美高梅 ( 路氹發展 ) China State HKD MVAC services fixing 2015 Shangri-la and Traders Hotels Sheraton and St. Regis Hotels (Parcel 5&6) 威尼斯人 ( 五六期 ) Hsin Chong HKD MVAC services fixing 2015 Shangri-la and Traders Hotels Sheraton and St. Regis Hotels (Parcel 5&6) 威尼斯人 ( 五六期 ) Hsin Chong HKD Others 2015 Shangri-la and Traders Hotels Sheraton and St. Regis Hotels (Parcel 5&6) 威尼斯人 ( 五六期 ) Hsin Chong HKD Suspended ceiling fixing

18 Tower A, Manulife Fiancial Centre, 223 Wai Yip Street, Kwun Tong, Kwoloon, Hong Kong Hotline: Job / Application Reference Product Name: Flush anchor HKD 18 May 2016 Date Project Name Main Contractor Product Name Application Shangri-la and Traders Hotels Sheraton and St. Regis Hotels (Parcel 5&6) 2015 威尼斯人 ( 五六期 ) Hsin Chong HKD-SR Plumbing & drainage fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD Fire services fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD MVAC services fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD Stone cladding fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD Suspended ceiling fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD-ER Drywall/gymsum panel fixing 2015 Venetian (Parcel 3) - Parisian 威尼斯人 ( 三期 ) - 巴黎人 Hsin Chong HKD-SR Plumbing & drainage fixing 永利皇宮 Leighton HKD Balustrade fixing 永利皇宮 Leighton HKD Electrical services fixing 永利皇宮 Leighton HKD Fire services fixing 永利皇宮 Leighton HKD Hand rail fixing 永利皇宮 Leighton HKD Interior finishings fixing 永利皇宮 Leighton HKD MVAC services fixing 永利皇宮 Leighton HKD Others 永利皇宮 Leighton HKD Plumbing & drainage fixing 永利皇宮 Leighton HKD Suspended ceiling fixing 永利皇宮 Leighton HKD Temporary fixing 永利皇宮 Leighton HKD-ER Electrical services fixing

19 Tower A, Manulife Fiancial Centre, 223 Wai Yip Street, Kwun Tong, Kwoloon, Hong Kong Hotline: Job / Application Reference Product Name: Flush anchor HKD 19 May 2016 Date Project Name Main Contractor Product Name Application Project Type:Railway MTR - Express Rail Link 2015 港深廣高速鐵路 MTRC HKD Curtain wall fixing 2015 MTR - Express Rail Link 港深廣高速鐵路 MTRC HKD Hand rail fixing 2015 MTR - Express Rail Link 港深廣高速鐵路 MTRC HKD Louvre fixing 2015 MTR - Express Rail Link 港深廣高速鐵路 MTRC HKD-SR Metal gate fixing 2015 MTR - Express Rail Link 港深廣高速鐵路 MTRC HKD-SR Signage fixing 2015 MTR - Express Rail Link 港深廣高速鐵路 MTRC HKD-SR Temporary fixing 2015 MTR - Kwun Tong Line Extension 地鐵觀塘延長線 MTRC HKD Catchfence fixing 2015 MTR - Kwun Tong Line Extension 地鐵觀塘延長線 MTRC HKD-SR Catchfence fixing 沙中線 MTRC HKD Electrical services fixing 沙中線 MTRC HKD MVAC services fixing 沙中線 MTRC HKD Plumbing & drainage fixing 沙中線 MTRC HKD Temporary fixing 沙中線 MTRC HKD-ER Electrical services fixing 沙中線 MTRC HKD-ER Plumbing & drainage fixing 沙中線 MTRC HKD-ER Steel beam/bracket fixing 沙中線 MTRC HKD-SAC Electrical services fixing 沙中線 MTRC HKD-SAC Fire services fixing 沙中線 MTRC HKD-SAC MVAC services fixing

20 Tower A, Manulife Fiancial Centre, 223 Wai Yip Street, Kwun Tong, Kwoloon, Hong Kong Hotline: Job / Application Reference Product Name: Flush anchor HKD 20 May 2016 Date Project Name Main Contractor Product Name Application MTR - Shatin to Central Link 2015 沙中線 MTRC HKD-SAC Plumbing & drainage fixing 沙中線 MTRC HKD-SR Electrical services fixing 沙中線 MTRC HKD-SR Fire services fixing 沙中線 MTRC HKD-SR Plumbing & drainage fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD Catchfence fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD Electrical services fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD Others 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD Steel beam/bracket fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD Temporary fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD-ER Plumbing & drainage fixing 2015 MTR - South Island Line 地鐵南港島線 MTRC HKD-SAC Electrical services fixing 2015 MTR - West Island Line 地鐵西港島線 MTRC HKD Temporary fixing 2015 MTR - West Island Line 地鐵西港島線 MTRC HKD-ER Metal gate fixing 2015 MTR - West Island Line 地鐵西港島線 MTRC HKD-SR Metal gate fixing