A112 STANDARDS STATUS REPORT
|
|
- Beatrix Stone
- 5 years ago
- Views:
Transcription
1 A112 STANDARDS STATUS REPORT DESIGNATION & TITLE STATUS RESPONSIBILITY A (R2017) Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water- Connected Receptors) RC # , PINS #284 LB # (Approved) 12/28/2011 BSR-8 #1656 BSR-9 #1228 ANSI Approved S. F. Asay, Chair A Air Gaps LB # (Approved) 02/02/2017 BSR-8 # /27/2017 BSR-9 #1726 A (R2015) Air Gap Fittings for Use With Plumbing Fixtures, Appliances, and Appurtenances A (R2017) Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground A /CSA B Macerating Toilet Systems and Related Components Published: LB # (Approved) 12/16/2014 BSR-8 # /10/2015 BSR-9 # /13/2015 ANSI Approved LB # (Approved) 02/02/2017 BSR-8 # /27/2017 BSR-9 #1718 /Consolidation/Redesignation 05/11/2004 RC #11-785, PINS #414 LB # /Consolidation (Disapproved) LB #13-810RC1 Recirculation (Approved) 09/23/2013 BSR-8 # /12/2013 BSR-9 # /30/2013 ANSI Approved RC # , PINS #646 LB # Approved LB # RC1 Recirculation Approved 02/23/2018 BSR-8 # /23/2018 BSR-9 #1799 S. F. Asay, Chair A Air Gap Fitting/Break Devices G. W. Harrison, Chair A Stainless Steel Drain Systems J. Ballanco, Chair A Macerating Pumped Waste Systems
2 A (R2014) Water Heater Relief Valve Drain Tubes LB # (Approved) 03/05/2014 BSR-8 # /21/2014 BSR-8 # /29/2014 ANSI Approved M. Weiss, Chair A Relief Valve Drains ASME A /CSA B Personal Hygiene Devices for Water Closets Published: September 03, 2015 A (R2014) Water Closet Personal Hygiene Devices /Consolidation/Redesignation 12/01/2014 RC # , PINS #550 LB # Approval (Disapproved) LB # RC1 Recirculation Approval (Approved) 03/31/2015 BSR-8 # /17/2015 BSR-9 # /19/2015 ANSI Approved 09/03/2015 Revised/Consolidated/Redesignated as ASME A /CSA B45.16 M. Campos, Chair A Water Closet Personal Hygiene Devices A (R2015) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System A Plastic Push Fit Drain, Waste and Vent (DWV) Fittings A Draft Hydro-seat Lift LB # Approved 12/16/2014 BSR-8 # /10/2015 BSR-9 # /13/2015 ANSI Approved 08/4/2016 RC # , PINS #601 LB # New Standard Disapproved LB # RC1 New Standard Recirculation Approval (Cancelled) LB # RC101 New Std Approved 03/10/2017 BSR-8 # /24/2017 BSR-9 # /25/2017 ANSI Approved New Edition. 10/12/ Published Project Dropped M. Campos, Chair A Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System William Morris, Chair A Push-Fit Drain, Waste and Vent (DWV) Fittings
3 A Draft Project Dropped Mechanical Tee Tools A (R2008) Point of Use and Branch Water Sub-metering Systems WITHDRAWN RC # LB # Approved BSR-8 #1253 BSR-9 #940 06/11/2009 ANSI Approved A Draft Vent Pipe Plastic Membrane Funnels ASME A /CSA B Manually Operated Valves for Use in Plumbing Systems Published: June 30, 2017 A (R2010) Manually Operated Quarter-Turn Shutoff Valves for Use In Plumbing Systems New Harmonization 11/14/2014 RC # , PINS #547 LB # New Std Disapproved LB # New Std Approved 03/15/2017 BSR-8 # /31/2017 BSR-9 # /01/2017 ANSI Approved New Edition 06/01/2017 Revised/Consolidated/Redesignated as ASME A /CSA B W. E. Chapin, Chair A Vent Pipe Plastic Membrane Funnels M. Campos, Chair A Ball Valves A M 1997 (R2017) Supports for Off-the-Floor Plumbing Fixtures LB # (Approved) 02/02/2017 BSR-8 # /27/2017 BSR-9 #1719 B. Tubaugh, Chair A Supports for Off-the- Floor Plumbing Fixtures
4 A Framing-Affixed Supports for Offthe-Floor Plumbing Fixtures LB # Approved BSR-8 #1328 BSR-9 #992 01/04/2010 ANSI Approved 02/24/2014 PINS #524 RC #14-393, LB # Review and Comment RC # LB # Disapproved LB #17-837RC1 Approved 07/21/2017 BSR-8 # /20/2017 BSR-9 # /01/2017 ANSI Approved 12/09/2017 Published L. Himmelblau, Chair A Wall Affixed Support A Floor and Trench Drains A (R2012) Roof, Deck, and Balcony Drains 06/16/2011 RC # , PINS #420 LB # Disapproved LB # RC1 Approved LB # RC101 Approved 11/04/2015 BSR-8 # /21/2016 BSR-9 # /26/2016 ANSI Approved RC # , PINS #638 LB # Approved LB # RC1 Approved 11/27/2017 BSR-8 #2335 LB # Approved 09/25/2012 BSR-8 # /12/2012 BSR-9 # /17/2012 ANSI Approved RC #13-242, PINS #483 A. Murra, Chair A Floor Drains M. Weiss, Chair A Roof Drains
5 and Redesignation of A (R2007) 08/18/2011 RC # , PINS #426 A Draft Hydrants 01/26/2017 Project closed during the A112 Standards Committee meeting in San Juan, PR R. Burnham, Chair A Hydrants A Draft Expansion Joints SCREW THREAD GAGES A (R2015) Sanitary Floor Sinks 01/26/2017 Project closed during the A112 Standards Committee meeting in San Juan, PR 12/10/2009 PINS #356 BSR-8 1#476 BSR-9 # /19/ ANSI Approved LB # Approved 12/16/2014 BSR-8 # /10/2015 BSR-9 # /13/2015 ANSI Approved M. Campos, Chair A Expansion Joints M. Weiss, Chair A Floor Sinks A Draft Trench Drains 06/16/2011 RC # , PINS #421 Brian Tubaugh, Chair A Trench Drains A (R2015) Siphonic Roof Drains A (R2017) Backwater Valves LB # Approved 12/16/2014 BSR-8 # /10/2015 BSR-9 # /13/2015 ANSI Approved LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1720 M. Weiss, Chair A Siphonic Roof Drains R. Burnham, Chair A Metallic and Non- Metallic Backwater Valves
6 A Grease Interceptors 06/02/2015 RC # , PINS #561 LB # Disapproved LB RC1 Approved 07/12/2017 BSR-8 # /27/2017 BSR-9 # /10/2018 ANSI Approved 05/18/2018 Published D. Orton, Chair A Grease Interceptors A (R2017) Grease Removal Devices A Draft Oil Separators A (R2015) FOG (Fats, Oils & Greases) Disposal Systems LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1721 Project Closed 08/11/2009 RC # , PINS #337 LB # RC1 Approved BSR-8 # /14/2010 ANSI Approved LB # Approved 12/16/2014 BSR-8 # /10/2015 BSR-9 # /13/2015 ANSI Approved W. C. Whitehead, Chair A Grease Recovery Devices M. Weiss, Chair A FOG Disposal Systems
7 A /CSA B (R2017) Plumbing Supply Fittings Under Continuous Maintenance (No PINS Required) Published: RC # , RC # , RC # LB # s Approved RC # LB # Approved 05/01/2017 BSR-8 # /18/2017 BSR-9 # /21/2017 ANSI Approved RC # LB # Disapproved LB # RC1 Recirculation Approved 03/05/2018 BSR-8 # /23/2018 BSR-9 #1801 M. Malatesta, Chair A Plumbing Fixture Fittings A /CSA B Plumbing Waste Fittings Under Continuous Maintenance (No PINS Required) Published: September 03, 2015 A (R2017) Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings 12/01/2014 RC # , PINS #551 LB # Disapproved LB # RC1 Recirculation Approved 03/31/2015 BSR-8 # /17/2015 BSR-9 # /19/2015 ANSI Approved LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1722 D. W. Viola, Chair A Fixture Waste Fittings Vacant, Chair A Backflow Devices
8 A /CSA B Flexible Water Connectors Under Continuous Maintenance (No PINS Required) Published: 08/11/2017 LB # Approved 03/05/2014 BSR-8 # /21/2014 BSR-8 # /29/2014 ANSI Approved RC # LB # Approved 03/29/2017 BSR-8 # /15/2017 BSR-9 # /19/2017 ANSI Approved S. Rawalpindiwala, Chair A Flexible Water Connectors A Flexible Water Connectors A M-1999 (R2004) Deck Mounted Bath/Shower Transfer Valves With Internal Backflow Protection A (R2014) In-Line Sanitary Waste Valves for Plumbing Drainage Systems A (R2017) Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures REVISED AND REDESIGNATED as A /CSA B ; Flexible Water Connectors Reaffirmed on October 5, 2004 PT and Stds Comm Ballot Approved Public Review BSR Closed 31 Jan 12 BSR ANSI Approved Withdrawal 23 Feb 2012 WITHDRAWN LB # Disapproved LB #14-218RC1 Approved 03/25/2014 BSR-8 # /11/2014 BSR-9 # /10/2014 ANSI Approved LB # Disapproved LB # RC1 Approved 10/31/2016 BSR-8 # /31/2017 BSR-9 # /24/2017 ANSI Approved G. S. Duren, Chair A Sanitary Waste Valves J. Ballanco, Chair A Barrier Free Protection for Traps and Supplies
9 A /CSA B Enameled Cast Iron and Enameled Steel Plumbing Fixtures Under Continuous Maintenance (No PINS Required) Published: August 08, 2013 LB # Disapproved LB # RC1 Approved 03/26/2013 BSR-8 # /13/213 BSR-9 # /26/2013 ANSI Approved RC # LB # Disapproved LB # RC1 Recirculation Approved 02/23/2018 BSR-8 # /23/2018 BSR-9 #1800 S. Rawalpindiwala, Chair A Enameled Cast Iron Plumbing Fixtures A /CSA B Ceramic Plumbing Fixtures Under Continuous Maintenance (No PINS Required) Published: August 08, 2013 A /CSA B Stainless Steel Plumbing Fixtures Under Continuous Maintenance (No PINS Required) Published: 05/31/2017 LB # Disapproved LB # RC1 Approved 03/26/2013 BSR8 # /13/2013 BSR-9 # /23/2013 ANSI Approved Update 01 Editorial Changes 11/05/2013 Published RC # LB # Disapproved LB # RC1 Recirculation Approved 03/20/2018 BSR-8 #2367 RC # LB # Approved 12/19/2016 BSR-8 # /001/2017 BSR-9 # /10/2017 ANSI Approved Errata #1 RC # Issued 05/31/2017 Errata #2 RC # Issued 05/31/2017 P. V. DeMarco, Chair A Vitreous China Plumbing Fixtures S. Rawalpindiwala, Chair A Stainless Steel Plumbing Fixtures
10 A M-1994 (R2004) Porcelain Enameled Formed Steel Plumbing Fixtures CONSOLIDATED into A /CSA B also included: Supplement 1 and 2 to ASME A M Errata issued December 96 A /CSA B Flush Valves and Spuds for Water Closets, Urinals, and Tanks Under Continuous Maintenance (No PINS Required) Published: June 02, 2017 A Trim for Water-Closet Bowls, Tanks, and Urinals A ; Hydraulic Requirements for Water Closets and Urinals Update 01 (Erratum) May 2012 Reference to CSA B was missing in reference section. The year was also created in section found. LB # Approved 04/11/2016 BSR-8 # /05/2016 BSR-9 # /14/2016 ANSI Approved RC # LB # Disapproved LB # RC 1 Approved 02/21/2017 BSR-8 # /12/2017 BSR-8 # /23/2017 ANSI Approved Original Publication ANSI approved on November 29, 2005 REVISED AND REDESIGNATED as A /CSA B ; Trim for Water-Closet Bowls, Tanks, and Urinals CONSOLIDATED into A /CSA B S. Rawalpindiwala, Chair A A Project Team on Trim for Water Closet Bowls/Tanks
11 A /CSA B (R2017) Hydromassage Bathtub Systems Under Continuous Maintenance (No PINS Required) Published: Revsion 08/27/2010 PINS #385 LB # Disapproved LB # RC1 Approved BSR-8 #1650 BSR-9 # /23/2012 ANSI Approved RC # LB # Approved 12/06/2016 BSR-8 # /17/2017 BSR-9 # /23/2017 ANSI Approved S. Rawalpindiwala, Chair A Whirlpool Bathtub Appliances A ; Whirlpool Bathtub Appliances A ; Suction Fittings for Use in Swimming Pool, Wading Pools, Spas, and Hot Tubs Original Publication ANSI approved July 24, 1995 REVISED AND REDESIGNATED as ASME A / CSA B45.10; Hydromassage Bathtub Systems WITHDRAWN SUPERSEDED BY APSP-16 Publish by Association of Pool & Spa Professionals Std Comm & PT Recirculation Ballot RC1 APPROVED Public Review BSR closed 17 May 11 BSR ANSI Approved 15 Aug 11 Addenda 'a' to ASME A Addenda 'b' to ASME A BSR-9 #842 08/11/2008 ANSI Approved Spa Addenda and Editorial Changes Spa Addenda Record Stds Comm APPROVED Editorial Changes LB #09-815RC1 Stds Comm APPROVED Public Review BSR-8 #1319 BSR-9 #982 10/22/2009 ANSI Approved PUBLISHED
12 A M (R2008); Non-Vitreous Ceramic Plumbing Fixtures CONSOLIDATED into A /CSA B also included: Supplement 1 to ASME A M-1991 Erratum released for publication on 4/26/99 A Retrofit Dual Flush Devices for Water Closets A Draft Penalware and Special Use Fixtures A Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems A (R2007) Electrohydraulic Water Closets Withdrawal RC # Withdrawal Disapproved 02/15/2012 RC #12.327, PINS #448 PT LB # (Disapproved) LB # (Disapproved) LB #13-853RC1 (Approved) LB #13-853RC101 Approved 03/13/2017 BSR-8 # /24/2017 BSR-9 # /19/2017 ANSI Approved 02/21/2018 Published Project Closed 05/10/2013 PINS #539; RC # LB # Approved LB # RC1 Approved 09/18/2014 Submitted to Publishing 09/18/2014 BSR-8 # /05/2014 BSR-9 # /09/2014 ANSI Approved 02/17/2015 Published Consolidated into A /CSA B M. Campos, Chair A Dual Flush Devices for Water Closets M. Campos, Chair A Movable Lavatory Systems
13 A (R2018) Six-Liter Water Closets Equipped With a Dual Flushing Device 05/10/2013 PINS #497; RC # LB # Approved 07/08/2013 BSR8 # /03/2013 BSR8 # /12/2013 ANSI Approved RC # LB # Approved 02/08/2018 BSR-8 # /03/2018 BSR-9# /08/2018 ANSI Approved S. Rawalpindiwala, Chair A Dual Flush for 6L Water Closets A (R2017) Bathtub/Whirlpool Bathtubs With Pressure Sealed Doors A Terrazzo Plumbing Fixtures 04/21/2011 RC # , PINS #413 LB # Approved BSR-8 #1640 BSR-9 # /05/2012 ANSI Approved LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1723 WITHDRAWN 08/23/2006 ANSI Approved Stds Com Blt Approved Board Ballot Approved Public Review BSR Closed 08 Jun 10 BSR Withdrawal ANSI Approved 07 Jul 10 Published as a harmonized Standard CSA B /IAPMO Z S. Rawalpindiwala, Chair A Bathtubs and Whirlpools with Pressure Sealed Door
14 A (R2018) Manufactured Safety Vacuum Release Systems (SVRS) For Residential and Commercial Swimming Pool, Spa, Hot Tub and Wading Pool Suction Systems 04/08/2009 RC # , PINS #325 LB # RC101 Approved BSR-9 # /13/2010 ANSI Approved G. S. Duren, Chair A Safety Vacuum Release System (SVRS) LB # Approved 03/18/2015 BSR-8 #2039 Cancelled Extension 03/25/2015 BSR-11 #150 Extension Granted until 03/25/2018 RC # LB # Approved 02/08/2018 BSR-8 # /03/2018 BSR-9# /08/2018 ANSI Approved A Glass Lavatory Fixtures A Vitreous China Nonwater Urinals A Qualification of Installers of High Purity Piping Systems A Qualification of Installers of Firestops Systems and Devices for Piping Systems A Draft Qualification of Installers of Residential Fire Sprinkler Systems A M-1991 Floor Drains PIR Dropped Project picked up by CSA and IAPMO CSA B45.11/IAPMO Z /12/2016 RC #16-68, PINS #582 LB # Disapproved LB # RC1 Approved 06/10/2016 BSR-8 # /26/2016 BSR-9 # /31/16 ANSI Approved ANSI Approved March 18, 2004 TRANSFERRED to ASSE (July 2009 Meeting) ANSI Approved March 18, 2004 TRANSFERRED to ASSE (July 2009 Meeting) TRANSFERRED to ASSE (July 2009 Meeting) REVISED AND REDESIGNATED as A ; Floor and Trench Drains J. M. Koeller, Chair A Non-Water Urinals.
15 A M-1983 REVISED AND REDESIGNATED as Roof Drains A Roof, Deck, and Balcony Drains A M-1985 (R2017) Hydrants for Utility and Maintenance Use A M-1991 (R2017) Cleanouts A M Water Hammer Arresters ASSE /ASME A /CSA B Performance Requirements for Anti-Siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks ANSI Forms Process by ASSE Published: LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1724 LB # Approved 02/02/2017 BSR-8 # /27/2017 BSR-9 #1725 Project Closed /Consolidation/Redesignation RC # LB # New Std Disapproved LB # RC1 New Std Approved 10/16/2015 ANSI Approved Update #1 September 2017 D. Marbry
16 ASSE /ASME A /CSA B Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations ANSI Forms Processed by ASSE Published: 02/17/2017 /Consolidation/Redesignation RC # LB # Disapproved LB # RC101 - Approved 07/12/2012 ANSI Approved Update 01 (Erratum) May 2012 The year of a reference document in preface was corrected. Subsections of were incorrectly labeled. M. Malatesta Update 02 Editorial Changes 11/05/2013 Published RC # LB # Disapproved LB # RC1 Approved LB # Board Approved 01/06/2017 ANSI Approved ASSE 1018/ASME A /CSA B125. Performance Requirements for Trap Seal Primer Valves Potable Water Supplied ASSE /ASME A / CSA B Performance Requirements for Pressurized Flushing Devices for Plumbing Fixtures ANSI Forms Processed by ASSE Published: February, 19, /17/2014 During the A112 Standards Committee Meeting in Seattle, WA it was approved to remove ASME from this Tri-Harmonized project /Consolidation/Redesignation RC # LB # New Std Disapproved LB # RC1 New Std Approved LB # RC101 New Std Approved 10/09/2014 BSR-8 Submitted by ASSE 01/07/2015 BSR-9 Submitted by ASSE 01/21/2015 ANSI Approved Update #1 September 2017 M. Malatesta
17 ASSE /ASME A /CSA B Performance Requirements for Water Temperature Limiting Devices /Consolidation/Redesignation RC # LB # New Std Disapproved LB # RC1 New Std Approved LB # RC101 New Std Approved L. Himmelblau 10/30/2015 ANSI Approved ANSI Forms Processed by ASSE Published: Update #1 September 2017 Legend Blue: Red: New Standards/Draft Stage Superseded/Closed/Withdrawn Standards Revised: 05/24/2018 by A. L. Guzman Rodriguez
Summary of Substantive Changes between the 2012 and 2018 editions of CSA B125.3 Plumbing Fittings
Summary of Substantive Changes between the 2012 and 2018 editions of CSA B125.3 Plumbing Fittings Presented to the IAPMO Standards Review Committee on October 15, 2018 General: The changes to this standard
More informationCross Connection Control. 2 CE Hours
Cross Connection Control 2 CE Hours Wisconsin Contractors Institute N27 W23953 Paul Road, Suite 203 Pewaukee, WI 53072 www.wicontractorsinstitute.com 262-409-4282 Cross Connection Control Purpose of this
More informationTHE KEENEY MANUFACTURING COMPANY
Brass Tubular P Traps 1-8 Repair Traps 8-9 S Traps 9-11 Sink Traps 11-15 Bath Traps 15 Washing Machine Traps 16 J Bends 16-17 Sink Trap J Bends 17-18 Wall Bends 19 Floor Tubes 19 Center Outlet Continuous
More informationASSE International Product (Seal) Listing Program
Manufacturer Contact Person Address ASSE International Product (Seal) Listing Program ASSE 07-05 / ASME A.9.07-05 / CSA B5.7-5 Pressurized Flushing Devices for Plumbing Fixtures Laboratory File Number
More informationThe purpose of this brochure is to explain to owners and contractors the City of Burnaby s requirements for private swimming pools.
Building Information BURNABY PLANNING & BUILDING DEPARTMENT Swimming Pools The purpose of this brochure is to explain to owners and contractors the City of Burnaby s requirements for private swimming pools.
More informationIAPMO Members and Other Interested Parties
Lynne Simnick Recording Secretary IAPMO Executive Committee Arnold Rodio Chairman Swimming Pool, Spa, and Hot Tub Code TC To: IAPMO Members and Other Interested Parties Date: February 2017 Enclosed is
More informationPresented to the IAPMO Standards Review Committee on March 7, 2016
Summary of Substantive Changes between the 2015 edition of ASSE 1070/ASME A112.1070/CSA B125.70, Water Temperature Limiting Devices, the 2004 edition of ASSE 1070, Water Temperature Limiting Devices, and
More informationTHE PERFECT PRESSURE DROP TRAP PRIMER
THE PERFECT PRESSURE DROP TRAP PRIMER FIGURE NO. 2694 PATENT NO. 9,708,808 Regularly furnished in Lead-Free Brass as shown (back). Optional finishes available in Chrome (front), Nickel, or Stainless Steel
More informationCUSTOMER ASSISTANCE GUIDE BUILDING PERMIT APPLICATION SUBMITTAL REQUIREMENTS
CUSTOMER ASSISTANCE GUIDE BUILDING PERMIT APPLICATION SUBMITTAL REQUIREMENTS SWIMMING POOLS (IN-GROUND OR ABOVE-GROUND), SPAS AND HOT TUBS (CONTAINS WATER OVER 24 INCHES DEEP) Please read all of the following
More informationList of Forms. Form Description Page No. Form Commercial Swimming Pool Discharge Application Form 31-4
City of Columbia Engineering Regulations PART 31: SPECIFICATIONS FOR COMMERCIAL SWIMMING POOL BACKWASH AND DRAINAGE Table of Contents Paragraph Description Page No. 31.1 General 31-1 31.2 Definitions 31-1
More information22. Specialty Valves.
22. Specialty Valves. a. Types of Specialty Valves. 1) Use of the following specialty valves is covered in this section: Altitude Valve, Pressure Reducing Valve, Pressure Relief Valve, Swing Check Valve,
More informationAIR GAP (AG) Low Hazard High Hazard
AIR GAP (AG) On Low Hazard and High Hazard applications, Air Gap (AG) is used for the physical separation (vertical distance) between the lowest opening point from any pipe or outlet supplying water and
More information1 Exam Prep NFPA 99 Health Care Facilities Questions and Answers (Plumbing Contractor)
1 Exam Prep NFPA 99 Health Care Facilities Questions and Answers (Plumbing Contractor) 1. According to NFPA 99, SCFM is an acronym for. a) Surface Conditions at Fahrenheit Mercury b) Standard Conditions
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More informationFlorida Building Code Review Checklist
Florida Building Code Review Checklist PROJECT IDENTIFICATION: CONTRACTOR: ARCHITECT: STRUCTURAL ENGINEER OF RECORD: CIVIL ENGINEER OF RECORD: PLUMBING ENGINEER OF RECORD: MECHANICAL ENGINEER OF RECORD:
More informationCode Compliance Incorporated
Telephone Facsimile 352/473-4070 352/473-1080 REPORT REGARDING CURRENT NATIONAL STANDARDS FOR ENTRAPMENT PREVENTION AND INVESTIGATION OF DUAL-DRAIN, STEVEN S VENT, U-TUBE VENT PIPE, AND FLORIDA VENT PIPE
More informationREGISTRATION EXAMINATION, NOVEMBER 2015 LICENSED PLUMBER ANSWER SCHEDULE
No. 9192 REGISTRATION EXAMINATION, NOVEMBER 2015 LICENSED PLUMBER ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2015. All rights reserved. No part of this publication may be reproduced by
More informationappendix a recommended rules For sizing the water supply system PRE-PRINT Chart a 1.2 FriCtion losses For Disk-type water Meters
recommended rules For sizing the water supply system Because of the variable conditions encountered, it is impractical to lay down definite detailed rules of procedure for determining the sizes of water
More informationPUBLIC SPA CHECKLIST. Planning and Building Department City of Mississauga 300 City Centre Drive, 3th Floor Mississauga ON L5B 3C1
Planning and Building Department City of Mississauga 300 City Centre Drive, 3th Floor Mississauga ON L5B 3C1 PUBLIC SPA CHECKLIST This checklist is prepared for purposes of convenience only. For accurate
More informationWORCESTER COUNTY HEALTH DEPARTMENT PRE-OPENING GUIDE RECREATIONAL POOLS 2. DECK AND COPING MUST BE IN GOOD REPAIR AND PROPERLY DRAINED. (.
A. DECKS WORCESTER COUNTY HEALTH DEPARTMENT PRE-OPENING GUIDE RECREATIONAL POOLS 1. FENCING MUST BE IN GOOD REPAIR. (.21) A. MINIMUM 6 FT FOR MAIN POOL. B. MINIMUM 3 FT FOR WADING POOL SEPARATION FENCE.
More informationANTI-ENTRAPMENT PLAN
ANTI-ENTRAPMENT PLAN Anti-Entrapment Plan Presenters: Kevin Jeroncic, Alberta Health Services Wade Goin, Alberta Health Services Kelly Carter, Lifesaving Society Session Objectives Defining Entrapment
More informationAPPENDIX A RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEMS CHART A-1 FRICTION LOSSES FOR DISK-TYPE WATER METERS 1-1/2"
RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEMS Because of the variable conditions encountered, it is impractical to lay down definite detailed rules of procedure for determining the sizes of water
More informationAPPENDIX A RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEM CHART A 1.2 FRICTION LOSSES FOR DISK-TYPE WATER METERS 1-1/2"
RECOMMENDED RULES FOR SIZING THE WATER SUPPLY SYSTEM Because of the variable conditions encountered, it is impractical to lay down definite detailed rules of procedure for determining the sizes of water
More informationWORCESTER COUNTY HEALTH DEPARTMENT PRE-OPENING GUIDE SEMI PUBLIC POOLS 1. POOL WALLS AND BOTTOM SMOOTH, LIGHT COLORED AND EASILY CLEANABLE. (.
WORCESTER COUNTY HEALTH DEPARTMENT PRE-OPENING GUIDE SEMI PUBLIC POOLS A. DECKS 1. POOL WALLS AND BOTTOM SMOOTH, LIGHT COLORED AND EASILY CLEANABLE. (.13) 2. LIFELINE IN PLACE AND SECURE AND A 4" MINIMUM
More informationUnderstanding and Compliance of the Virginia Graeme Baker Pool & Spa Safety Act
Understanding and Compliance of the Virginia Graeme Baker Pool & Spa Safety Act Sponsored by the U.S. Consumer Product Safety Commission Presented By: Rick English, Certified Building Professional, CPOI
More informationTRADESMAN DRAINLAYER
No. 9197 REGISTRATION EXAMINATION, NOVEMBER 2017 TRADESMAN DRAINLAYER ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2017. All rights reserved. No part of this publication may be reproduced
More informationSwimming Pool Plans and Specification Report
Swimming Pool Plans and Specification Report For TCHD Use Only Date Received by Employee Number: *Plans Received Yes No *$120.00 Plan Review Fee Paid Yes No *Facility Name: Phone: *Address: *Owner: *Phone:
More informationJackson County Department of Public Health Application to Construct, Install, Remodel or Modify a Public Swimming Pool
Jackson County Department of Public Health 538 Scotts Creek Rd. Suite 100 Sylva, NC 28779 Tel: 828-586-8994 FAX: 828-586-3493 Shelley Carraway DIRECTOR Jackson County Department of Public Health Application
More information2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE
TITLE 14 CHAPTER 8 PART 3 HOUSING AND CONSTRUCTION PLUMBING CODES 2009 NEW MEXICO SWIMMING POOL, SPA AND HOT TUB CODE 14.8.3.1 ISSUING AGENCY: Construction Industries Division (CID) of the Regulation and
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationSWIMMING POOLS/SPAS/HOT TUBS PLAN REVIEW GUIDE SHEET
SWIMMING POOLS/SPAS/HOT TUBS PLAN REVIEW GUIDE SHEET Sect. 106-748, City Code of Ordinances: Regulations are applicable to both above and inground swimming pools, spas and hot tubs. POOL PLACEMENT Measurement
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationSwimming Pool Requirements Packet
Plot Plans shall indicate the following: Drawn to an appropriate scale with pool depths shown and dimensions to other structures Have an engineer address any surcharge loads on the pool or from the pool
More informationMDX² INSTALLATION MANUAL (RETROFIT FIBERGLASS, VINYL & CONCRETE POOLS WITH MDX)
Only for Pools with an existing MDX sump ANTI-ENTRAPMENT DEBRIS DRAIN MDX² INSTALLATION MANUAL (RETROFIT FIBERGLASS, VINYL & CONCRETE POOLS WITH MDX) Safety compliant according to the Virginia Graeme Baker
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationLincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC Phone: Fax:
Lincoln County Environmental Health Department 302 North Academy Street, Suite B Lincolnton, NC 28092 Phone: 704-736-8426 Fax: 704-736-8427 APPLICATION FOR APPROVAL TO CONSTRUCT OR RENOVATE A PUBLIC SWIMMING
More informationEffective Date: January 2018 Void After: January Product: Fill Valves (Anti-Siphon) File No. 3733
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationSWIMMING POOL, SPA, & HOT TUB GUIDELINES
SWIMMING POOL, SPA, & HOT TUB GUIDELINES A. Adopted construction codes and installation requirements 1. 2015 edition of the International Residential Code and Appendix Q, 2. 2014 edition of the National
More informationSwimming Pools, Hot Tubs and Spas
OLATHE FIRE DEPARTMENT BUILDING CODES 1225 S. Hamilton Circle Olathe, KS 66061 / Main: (913) 971-7900 / Fax: (913) 971-9812 Swimming Pools, Hot Tubs and Spas Definitions: Swimming Pool- Any structure intended
More informationUser's Manual. MixRite TF 10. Edition 05.08
User's Manual MixRite TF 10 Edition 05.08 1 Tefen MixRite TF 10 fertilizer and chemicals Injector Congratulations on your purchase of one of Tefen s high quality products. To get the best results from
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationSupplement Catalog For. Marine/RV & Manufactured Housing
Supplement Catalog For Marine/RV & Manufactured Housing TABLE OF CONTENTS 0 Series Solvents and Roof Flashings...4 Polypropylene Tubular Products...6 300 Series PVC Pressure Pipe & Fittings... Nipples...12
More informationApril For do-it-yourselfers as well as pros, Genova is the only way to go in home plumbing and vinyl building materials.
April 2019 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan Master Plumber, License No. 05275 (right) In the late 1950 s, Robert F. Williams had the idea of utilizing
More informationPlumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
More informationTOWN OF FARMINGTON DEPARTMENT OF PUBLIC WORKS & DEVELOPMENT SERVICES. Russell M. Arnold Jr., P.E. Director/Town Engineer (860)
TOWN OF FARMINGTON DEPARTMENT OF PUBLIC WORKS & DEVELOPMENT SERVICES Russell M. Arnold Jr., P.E. Director/Town Engineer (860) 675-2305 BUILDING, ENGINEERING, PLANNING and ZONING DIVISIONS Christopher Foryan,
More informationJune For do-it-yourselfers as well as pros, Genova is the only way to go in home plumbing and vinyl building materials.
June 2018 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan Master Plumber, License No. 05275 (right) In the late 1950 s, Robert F. Williams had the idea of utilizing
More informationNew England Municipal Building Officials Preventing Drowning and Suction Entrapment through Code Compliance
New England Municipal Building Officials Preventing Drowning and Suction Entrapment through Code Compliance 2009 International Family of Codes Swimming Pools and Spas 2009 International Building Code 2009
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR WATER HEATER SUPPLY SHUTOFF VALVE WITH A / THERMAL EXPANSION CONTROL VALVE IGC 128-2006a8 1. PURPOSE 1.1 The purpose
More informationSECTION SWIMMING POOLS
SECTION 13 1100 SWIMMING POOLS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pool shell. 2. Pool mechanical system. 3. Pool heating system. 4. Interior pool finish. 5. Final testing and demonstration
More informationDigester Processes. 1. Raw Sludge Pumping System
Digester Processes 1. Raw Sludge Pumping System Removes accumulated sludge from the primary clarifiers, pumped through 1 of 2 pipes either 150 or 200mm in diameter (Fig. 1.1). Fig 1.1 Pipes feeding Digesters
More informationWater Hammer Arrestors
Water Hammer rrestors watts.com What is Water Hammer? T he noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage
More informationEffective Date: October 2017 Void After: October Product: Ceramic Plumbing Fixtures File No. 2467
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationCOMPACT TRIPLE WALL OUTLET STATION MODEL INSTALLATION AND OPERATING INSTRUCTIONS
COMPACT TRIPLE WALL OUTLET STATION MODEL 6255-1 INSTALLATION AND OPERATING INSTRUCTIONS To assure safe operation and conformation to local fire codes, all Porter Outlet Stations are designed to be used
More informationSIZING OF WATER PIPING SYSTEM
SIZING OF WATER PIPING SYSTEM (This appendix is informative and is not part of the code.) SECTION AP101 GENERAL AP101.1 Scope. AP101.1.1 This appendix outlines two procedures for sizing a water piping
More informationCeramic plumbing fixtures ASME A / CSA B
Ceramic plumbing fixtures ASME A112.19.2-2013/ CSA B45.1-13 Legal Notice for Harmonized Standard Jointly Developed by ASME and CSA Group Intellectual property rights and ownership As between American Society
More informationBackflow What is it? City Water. Boiler. Make-Up Water Line
Backflow What is it? Backflow? You may have heard of it, and you may understand some of what it involves. This booklet will help you to understand it better; exactly what it is, and how to prevent it.
More informationREGISTRATION EXAMINATION, JUNE 2017 CERTIFYING PLUMBER ANSWER SCHEDULE
No. 9195 REGISTRATION EXAMINATION, JUNE 2017 CERTIFYING PLUMBER ANSWER SCHEDULE Plumbers, Gasfitters and Drainlayers Board, 2017. All rights reserved. No part of this publication may be reproduced by any
More informationPOOL BARRIER AMENDMENTS & GUIDELINES: APPENDIX G SWIMMING POOLS, SPAS AND HOT TUBS
SECTION AG101 - GENERAL POOL BARRIER AMENDMENTS & GUIDELINES: APPENDIX G SWIMMING POOLS, SPAS AND HOT TUBS AG101.1 General. The requirements of this appendix shall apply to the design and construction
More informationBladder Tank Installation & System Design Information
Bladder Tank Installation & System Design Information The Chemguard Bladder Tank is one component in a balanced pressure foam proportioning fire protection system. It requires no external power other than
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More information553 Series.
38467.03 www.caleffi.com Pre-adjustable filling units Copyright 01 Caleffi 3 Series Function The automatic filling valve is a device consisting of a pressure reducing valve with compensating seat, visual
More informationA cross-connection1 is the
Chapter Three Theory of Backflow and Backsiphonage A cross-connection1 is the link or channel connecting a source of pollution with a potable water supply. The polluting substance, in most cases a liquid,
More informationPiece Weight. List Price. Basket Strainer-Plastic. Wash Tray Plug. TIP TOE Tub Drain. Shower Drain Grids
PLUMBING SPECIALTIES PS_1018 EFFECTIVE OCTOBER 1, 2018 (SUPERCEDES PS_0918) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Bath Coupling Elbow 123-096
More informationSIZING OF WATER PIPING SYSTEM
SIZING OF WATER PIPING SYSTEM The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance. E101.1 Scope. SECTION E101 GENERAL E101.1.1 This appendix
More informationTECHNICAL DATA. Low-Flow Foam Preaction System with Hydraulically Actuated Concentrate Control Valve.
Foam 302 a 1. DESCRIPTION (Refer to Figure 1 on page 302 e.) The Viking Low-Flow Foam/Water Proportioning System is a UL Listed and FM Approved system, for use with 3M and Viking brand foam concentrate.
More informationGUIDELINE FOR MITIGATING SUCTION HAZARDS IN POOLS
GUIDELINE FOR MITIGATING SUCTION HAZARDS IN POOLS JUNE 2014 HEALTH AUTHORITY RECREATIONAL WATER COUNCIL Mitigating Suction Hazards in Swimming Pools Main-drains and other suction points in swimming pools
More informationInstallation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels
OM003 Installation, Operation and Maintenance Instructions for Direct Hot Water Storage Vessels The operating and maintenance instructions contained within this package are for standard storage vessels
More informationMIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
More informationEasy Nest Kits. Installation Suggestions
Easy Nest Kits Installation Suggestions 2 General Recommendations Hydraulics Vacuum breakers should be installed to prevent siphoning. Flexible connectors should follow FRP tank manufacturers recommendations.
More informationFlorida Building Code 6 th Edition (2017) Residential. Broward County Edition Loose-leaf Supplement
Board of Rules and Appeals FBC 6 th Edition (2017)- Residential - Supplement No. 1 January 1, 2018 Florida Building Code 6 th Edition (2017) Residential File removed pages for reference. Broward County
More informationSpas Hotels/Resorts Apartments & Condominiums Campgrounds Health Clubs Medical Clinics Waterparks
COMMERCIAL HOT TUBS Designed For Spas Hotels/Resorts Apartments & Condominiums Campgrounds Health Clubs Medical Clinics Waterparks HydroTher Mechanical Equipment Packs Mechanical Support Systems Each HydroTher
More informationWelcome to the PMG Educational Program. Sponsored by:
Welcome to the PMG Educational Program Sponsored by: www.iccsafe.org/conference #ICCAC18 Today s Presenter Layers of Protection 2018 ISPSC Carvin DiGiovanni Vice President, Technical and Standards Association
More informationSwimming Pool Requirements
Swimming Pool Requirements 1. Definitions: Approved Safety Pool Cover. Means a manually or power-operated safety pool cover that meets all of the performance standards of the American Society for Testing
More informationWLP2012 STAINLESS STEEL. OPTIONS FOR 1300SS/1330SS Series
WLP2012 1100SS FLOOR DRAINS w/ ADJUSTABLE STRAINERS Type 304 cast stainless steel floor drain with flange, membrane clamping collar, seepage openings and satin finish stainless steel strainer with vandal
More informationCountry Residential Lots from 1 Acre PLUS! TEXAS Country Living at it s VERY BEST! Builder: Phone
Country Residential Lots from 1 Acre PLUS! TEXAS Country Living at it s VERY BEST! Builder: david@majorleaguecustomhomes.com Phone 940-206-6603 Realtor: cathy@majorleaguecustomhomes.com Phone 817-228-9936
More informationSpeed control assembly model A-1
Pressure Regulation 533a 1. DESCRIPTION The Viking Speed Control Assembly provides adjustment of the opening speed of Viking Deluge Valves, and adjustment of both the opening and closing speed of Viking
More informationTransferring and Storage
Organometallics Transferring and Storage A dip tube is available for Container 2 which can be screwed into the neck to permit safe transfer of product. Small quantities of metal alkyl can be withdrawn
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More information-FRU FREEZE RESISTANT WATER VALVE COOLERS SYSTEM
I N S TA L L AT I O N / I MN SA TA I N TL EL NAT AIN OC N E / MI AN IS NT RE UN CA TN I CO E N SI N S T R U C T I O N S INSTALLATION INSTRUCTIONS FOR -FRU OPTION Important: Read all instructions and refer
More informationBERMUDA GUNITE SKIMMER FOR SWIMMING POOLS
1 1 1 BERMUDA GUNITE SKIMMER FOR SWIMMING POOLS INSTALLATION AND USER S GUIDE Rev. G 6-26-12 IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS MASTERTEMP Pool and Spa
More informationCURRENT REQUIREMENTS FOR SWIMMING POOLS CONTAINED IN THE STATE FIRE PREVENTION AND BUILDING CODE (THE "UNIFORM CODE") (June 2008) Introduction
CURRENT REQUIREMENTS FOR SWIMMING POOLS CONTAINED IN THE STATE FIRE PREVENTION AND BUILDING CODE (THE "UNIFORM CODE") (June 2008) Introduction The State Uniform Fire Prevention and Building Code (the "Uniform
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationtable of contents bath accessories Cable Drains...19 Cover Plates Drains Drain Conversion Kits...20
table of contents kitchen accessories Air Gaps.............3 Basket Strainers.........3 Disposal Flanges....... 3-4 Faucet Hole Covers....... 4 Soap & Lotion Dispensers.... 4 Water Dispensers........ 4
More informationTECHNICAL DATA. Trimpac 244a. September 16, 2013
September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationproduct manual HM-4140, HM-4150, HM-4160 HM-4160A HM-4150 Humboldt FlexPanels
12.09 product manual HM-4140, HM-4150, HM-4160 HM-4160A HM-4150 Humboldt FlexPanels Introduction: This manual covers the installation and operation of Humboldt FlexPanels for Triaxial and Permeability
More informationHORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION
More informationFOAM TANK (1/2) DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET FOAM TANK (1/) DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER : ITEM NO. : 0 PROJECT : QUANTITY : 0 LOCATION : SERVICE : FOAM SYSTEM 0 05 CODE & STANDARDS
More informationROCKDALE COUNTY NEW SWIMMING POOL PLAN REVIEW
ROCKDALE COUNTY NEW SWIMMING POOL PLAN REVIEW Pool Name: Address: Contractor: Phone: Number of Pools Applied for: The following is a list of facility requirements for opening a public pool. Read each requirement
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationASSE International Product (Seal) Listing Program
ASSE International Product (Seal) Listing Program ASSE 1070-2015 / ASME A112.1070-2015 / CSA B125.70-15 Performance Requirements for Water Temperature Limiting Devices Manufacturer: Contact Person: E-mail:
More informationSWIMMING POOL, SPAS, HOT TUB REQUIREMENTS AND GUIDELINES (Updated 3/2018)
SWIMMING POOL, SPAS, HOT TUB REQUIREMENTS AND GUIDELINES (Updated 3/2018) POOL/SPA CHECKLIST Submittal of two (2) sets of plans is required for permit issuance. Obtain approval from the Planning/Zoning
More informationGWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST
GWINNETT COUNTY SWIMMING POOL PLAN REVIEW CHECKLIST Pool Name: Address: Contractor: Phone: Number of Pools Applied for: GENERAL INFORMATION Plan review paid Pool Piping plan stamped by Design Professional.
More informationBulletin Swimming pool, hot tub and spa installations Rules , , , , , and
Bulletin 68-7-11 Swimming pool, hot tub and spa installations Rules 68-000, 68-056, 68-058, 68-064, 68-068, 68-302 and 68-404 Scope (1) Swimming pools - general (2) Grounding & bonding (a) Bonding for
More informationPipe-Away Pressure Vacuum Vent /Conservation Vent
R R Pressure Vacuum Vent / End of Line Conservation Vent Flame Arrester with Pressure Vacuum Vent Pipe Away Pressure Vacuum Vent / Conservation Vent Vacuum Relief Vent Pressure Emergency Vent Free Vents
More informationAquor House Hydrant V2
Aquor House Hydrant V2 IN-WALL OUTDOOR FAUCET SYSTEM FLUSH-MOUNT QUICK-CONNECT SELF-DRAINING ANTI-SIPHON NON-FREEZE VBH-SERIES AQUOR HOUSE HYDRANT V2: WALL HYDRANT / FREEZELESS SILLCOCK Freezeless sillcock
More information