How to order: Please prefix the mbo part number or description with R239- example: R /014
|
|
|
- Lynette Henry
- 6 years ago
- Views:
Transcription
1 SL-retainer for bolt and haft with goove; compenating for play mbo tandard 8 SL-retainer with relief 2) (mbo tandard 88) SL-retainer without relief SL-retainer for bolt diameter = 1 mm, electroplated galvanied white; SL-retainer 1 mbo 8 galvanied white : 1 8 1/14 Max. Ma ize b h h1 a m approx. N 1) per 1 piece ±.2 h n 3) z 4 mbo / h mbo / mbo / mbo / mbo / mbo / mbo / h mbo / h ) for haft of 5 N/mm² tenile trength 2) only for ize 8 mbo 8 3) dimenional variation according to DIN 2768, medium Spring band teel, hardened and annealed to 145 up to 16 N/mm² tenile trength electr. galvanied white (layer min. 8 μm).../14 electr. galvanied yellow (layer min. 8 μm).../24 poible with or without tool; removable ee mbo catalogue page 15_1/page 62 13_1-53 -
2 KL-retainer for bolt and haft with goove; compenating for play mbo tandard 9 KL-retainer for bolt diameter = 12 mm, phophatied oiled; KL-retainer 12 mbo 9 phophatied oiled : /2 ize b h1 h2 a Max. approx. N 1) tatic Ma per 1 piece 3 mbo / mbo / mbo / mbo / mbo / mbo / mbo / mbo / mbo 9 3) / ) ) mbo 9 4) / ) ) *) dimenional variation according to DIN 2768, medium 1) for haft of 5 N/mm² tenile trength 2) correpond to tandard verion mbo tandard 7, however, extendible at will h11 h11 3) ize 16 may be ued for haft with diameter 16 or 18 4) ize 24 may be ued for haft with diameter 2 or 25 m +.1 n2 ) * ) z pring band teel, hardened and annealed to 145 up to 16 N/mm² tenile trength electr. galvanied white (layer min. 8 μm).../14 electr. galvanied yellow (layer min. 8 μm).../24 poible with or without tool, removable ee mbo catalogue page 15_1/page 62 13_2-54 -
3 Locking waher DIN 6799 for bolt and haft with goove mbo tandard 6799 Locking waher for groove diameter (nom. ize) = 4 mm, mechanically galvanied ilver; Locking waher DIN galvanied ilver : /26 Groove dia. ize Shaft dia. Locking waher Groove Supplementary data a Weight per 1 from to pc. (± IT1) 2.7 ± m n d3 F N F S g F Sg n abl min. max. kn with kn kn min / / ± / ± / / / ± / ± / / / ±.7 19* / / *) ize 19 only in tainle teel Additional ize upon requet pring teel C67S up to C75S according to DIN EN (of manufacturer choice); hardened and annealed to 46 up to 58 HV (equivalent to 46 to 54 HRC) alternative: tainle teel (upplement to.../) burnihed.../5 mech. galvanied ilver (layer min. 11 μm).../26 mech. galvanied yellow (layer min. 8 μm).../1 Note: The value in the table for thickne are valid for waher in the phophatied, blackened or polihed verion. DIN 6799 load capacity of groove F N : The F N value refer to the haft diameter. If the haft diameter i different from the load capacity of groove F N i determined by the formula: - F N = F N - poible with or without tool, removable ee mbo catalogue page 15_1/page 62 13_3-55 -
4 Bayonet clip for bolt and haft with goove mbo tandard 6 Bayonet clip with relief 3) (mbo tandard 66) Bayonet clip without relief Bayonet clip for bolt diameter = 1 mm, electroplated galvanied white; Bayonet clip 1 mbo 6 galvanied white : 1 6 1/14 Max. Ma ize b1 b2 h1 h2 a m approx. N ± ±.5 ±.5 ±.5 1) per 1 piece h n 2) z 4 mbo / h mbo / mbo / mbo / mbo / mbo / mbo / h mbo / h ) for haft of 5 N/mm² tenile trength 2) dimenional variation according to DIN 2768, medium 3) only for ize 6 mbo 6 pring band teel, hardened and annealed to 145 up to 16 N/mm² tenile trength electr. galvanied white (layer min. 8 μm).../14 electr. galvanied yellow (layer min. 8 μm).../24 ee mbo catalogue page 15_2/page 63 poible with or without tool, removable 13_4-56 -
5 Retainig ring DIN 471 for bolt and haft with goove Intallation pace without tenion ring hape a choen by manufacturer mbo tandard 471,2t A g Detail at manufacturer choice A m n (t) Shaft Ø ize Retaining ring for bolt diameter (nom. ize) = 8 mm, phophatied oiled; Retaining ring DIN phophatied oiled : /2 Ring Groove Supplementary data 2) d3 a b 1) d5 Weight ize m n F per 1 t d4 N F R g F n of plier Rg abl H13 pc. min. kn kn kn min. -1 according max. min. to DIN / / / / / / / ; / / / / / / ; / / / / / ; / / /... 2 / ) dimenion b mut not exceed dimenion a max. 2) the upplementary data apply only to pring-teel retaining ring according to DIN EN pring teel C67S up to C75S according to DIN EN (of manufacturer choice); hardened and annealed to 435 up to 58 HV (equivalent 44 up to 54 HRC) alternative: tainle teel (upplement to.../) DIN 471 load capacity: The load capacitie pecified in the table (F N, F R, F Rg ) do not include protection againt creeping in the event of tatic tre and againt fatigue failure in the event of pulating tre. At leat double protection i provided againt failure in the event of tatic tre. electr. galvanied white.../14 electr. galvanied yellow.../24 poible with tool; removable upon requet Note: The value in the table for thickne are valid for waher in the phophatied, blackened or polihed verion. DIN 471 retaining ring are not uitable for ecuring bolt a per mbo tandard 7 and mbo tandard 77. Recommendation: ee mbo catalogue page 4_3/ page 27 and 4_4/page 28 and alo 6_4/page 34 and 6_5/page 35 13_5-57 -
How to order: Please prefix the mbo part number or description with R239- example: R /014
Clevis joints similar to DIN 71751, with folding spring bolt mbo stard AFKB Clevis joint mbo stard AFKB assembled, Clevis mbo stard 02 03_01/page 23 03_02/page 24) Folding spring bolt mbo stard 01 02_01/page
Anchor size M6 M8 M10 M12 M16 M20 M6 M8 M10 M12 M16 M20. Anchor size M6 M8 M10 M12 M16 M20 M6 M8 M10 M12 M16 M20. Concrete Capacity Method
HSA tud anhor Feature: - high loading apaity - ore-ontrolled expanion - long thread HSA / HSA-R / HSA-F - head marking or identiiation ater etting - iretop aement - pre-aembled with nut and waher time
MEASUREMENT OF DYNAMIC STRESSES ON CARRIERS WITH DETACHABLE GRIP AT STATION ENTRANCE: LA.T.I.F. EXPERIENCES AND FUTURE PROSPECTS
MEASUREMENT OF DYNAMIC STRESSES ON CARRIERS WITH DETACHABLE GRIP AT STATION ENTRANCE: LA.T.I.F. EXPERIENCES AND FUTURE PROSPECTS dott.ing. Fabio Degaperi Introduction The importance of dynamic tre effect
Technical Data Sheet TI-F52 Locking Unit KFHL Certified by Lloyd s Register
English translation of German original TI-F52 Locking Unit KFHL Certified by Lloyd s Register For a detailed functional description refer to Technical Information TI-F10. Further important practical advice
Technical Information TI-S10 Safety Locks. 2 Function. Contents
English translation of German original TI-S1 Safety Locks high holding force by self-reinforcing clamping hydraulic or pneumatic actuation for static loads For further information on technical data please
Locking Units. Technical Information TI-F10. Locking by springs / releasing by pressure Types KFH, KFP and others
Technical Information SITEMA - ocking Units Hydraulic or pneumatic actuation English translation of German original TI-F0-EN-0/06 Technical Information TI-F0 ocking Units Holding in both load directions
SPM. Pressure Filters MEDIUM PRESSURE INLINE FILTER
PM Pressure Filters MEDIUM PREURE INLINE FILTER Pressure Filters PM PM MPa (0 bar) Port sizes: 1/ 1 Flow rates: 10 l/min TECHNICAL DATA Max. working pressure: MPa (0 bar) Max. test pressure: MPa (0 bar)
Cold Formed Steel Tension Members with Two and Three Staggered Bolts
Miouri Univerity of Science and Technoloy Scholar' Mine International Specialty Conference on Cold- Formed Steel Structure (2010) - 20th International Specialty Conference on Cold-Formed Steel Structure
RR 16 Commercial & Industrial Regulator
Gas RR 16 Commercial & Industrial Regulator Applications The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations
Hardened Steel Washers
USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16
E 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow
OMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
Bourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels
LIFTING SYSTEMS. R-System ACCREDITED. Lifting system. with spherical head
IFTING SYSTEMS ACCEITE -Sytem 2 ifting ytem with pherical head 3 4 ifting ytem with pherical head WHAT IS? Thouand of heavy precat concrete item are lifted and handled on a daily bai. -Sytem i the lifting
WK /2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32. Size 32 up to 42 MPa 700 dm 3 /min DESCRIPTION OF OPERATION
2/2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32 Size 32 up to 42 MPa 700 dm 3 /min WK 490 907 04.1999r. 2/2 way cartridge valve type URZS 32 can be used to build hydraulic systems
SV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
Valve Inspection & Testing
Inspection & Testing in accordance with API 598 Valve Inspection & Testing Shell Test (Body Hydro Test): - Each valve shall be tested in accordance with ASME B 16.34 for ASME valves. Shell test pressure
OMS, OMT and OMV Orbital Motors. Technical Information
OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV A Wide Range of Orbital Motors F300540.eps F300030.TIF A wide range of orbital motors Sauer-Danfoss is a world leader within production
MS Back-up, Spiral
MS 28782 Back-up, Spiral 1. Material: MIL-R-8791. 2. Surface must be smooth and free from irregularities. 4. Z gap dimension to be met with retainer over a mandrel of M diameter +.000 -.002. 5. Dash numbers
SERIES E30 RAISED RIB
SERIES E30 RAISED RIB Eurobelt Series E30 Raised Rib conveyor belt has been designed mainly for making product transfers by using finger plates. Due to its smooth surface of projecting ribs, it is recommended
FTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
Technical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
ASX 176 Axial Pressure regulator
ASX 176 Axial Pressure regulator ASX 176 Classification and Area of Application ASX 176 is a downstream pressure regulator, pilot controlled, for medium and high pressure applications. It is particularly
Technical information for O-rings
echnical information for O-rings eal effect An O-ring is a sealing element used to reliably seal against fluids and gases. he seal effect is created during installation by axial or radial compression of
The SAG type flat, rubber-steel, balance ropes
ROPES The SAG type flat, rubber-steel, balance ropes Application of the SAG ropes: The SAG type, flat, rubber-steel balance ropes, further on called the SAG ropes, are used for shaft transport at mines
RMS. Quick Change System. for manual chucking tool change. Advantages: Convenient chucking tool changes without the slightest sacrifice to safety.
for manual chucking tool change dvantages: Convenient chucking tool changes without the slightest sacrifice to safety. One and the same tool carrier can be used for virtually any Typee of mandrel, face
E 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d
R e t u r n - S u c t i o n F i l t e rs E 158 E 198 E 248 Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min 20.90-5e 0.0-2d D e s c r i p t i o n Application For operation in
PTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
List of Material Rope Courses FLEXIBLE PFEIFER SEIL- UND HEBETECHNIK GMBH
09/2014 R O T FLEXILE S U SEIL- UND HEETECHNIK GMH List of Material Rope Courses DR.-KARL-LENZ-STRASSE 66 D-87700 MEMMINGEN TELEPHONE +49 (0) 83 31-937-267 TELEFAX +49 (0) 83 31-937-341 E-MAIL wireropes@pfeifer.de
E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
Design Guide MSW from M20 to M70. Original version of the design guide
Page 1 of 11 Original version of the design guide For Series Components Spieth locknuts (precision locknuts) MSW 20.28 MSW 20.40 MSW 25.28 MSW 25.40 MSW 30.28 MSW 30.44 MSW 35.28 MSW 35.44 MSW 40.28 MSW
K0709 Quick-fit couplings
Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut
DIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIAL PRESSURE REGULATING VALVE zon Body material pressure diameter Max. temperature Brass DN 15-50 120 according to the pressure equipment directive 2014/68/UE does not require E marking FEATURES
OMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
Self-Aligning Cylindrical Roller Bearings. Plummer Block Housing. Series ACB, sealed on both sides. Series SLG01
Self-Aligning Cylindrical Roller Bearings Series ACB, sealed on both sides Plummer Block Housing Series SLG01 KRW Self-Aligning Cylindrical Roller Bearings sealed on both sides ACB self-aligning cylindrical
Bourdon tube pressure gauges for chemical applications EN 837-1
Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres.! When measuring gas or vapour, the instruments must be
compact ejector, Series ECM with Adjustable release pulse with silencer With filter vacuum switch: electronic 2 x PNP
00134428 Type Miniature compact injector Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / +0 C Working pressure min./max. 2. bar / 6 bar Medium Compressed air Max. particle
Axial Piston Variable Pump A10V(S)O (US-Version)
Axial Piston Variable Pump A1V()O (U-Version) RA-A 9271/3.12 1/52 Replaces: 12.9 Data sheet eries 31 ize NG18 ((A)A1VO) ize NG28 to 14 (A1VO) Nominal pressure 4 psi (28 bar) Maximum pressure 51 psi (35
IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10
IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound
Full Internal Relief Valves Instruction Manual
Full Internal Relief Valve Intruction Manual MEV200FIR & MEV00FIR Application: Deigned for ue in mobile LPG & NH container a a primary preure relief valve for bobtail and tranport trailer intallation.
Orbital Motors OMS, OMT and OMV
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev February 216 Corrected Hardening specification
STAR Ball and Roller Rail Systems with Gear Rack RE / Linear Motion and Assembly Technologies
STAR Ball and Roller Rail Systems with Gear Rack RE 82 217/2001-08 Linear Motion and Assembly Technologies STAR Ball and Roller Rail Systems, with Gear Rack Product Overview Gear rack, L-type with straight
PTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
EBR. Metric. ClaronPolyseal Piston Bearing Rings. Nominal Dimensions & Machining Tolerances. Claron Part Number. Ød ØG
EBR EBR 32 EBR EBR 46 EBR 32 46 Piston Bearing Rings EBR mm +0.0-0.05 >mm +0.0-0.08 Ø 19 26 34 44 H9 ±0.20 ±0. ØG 22 29 37 43 47 EBR /1 EBR 55 EBR EBR 63 EBR 55 63 44 49 54 57 59 1 1 1 1 1 47 52 57 62
IBS, INCORPORATED Index
ex uts Assortments Machine crew ized uts & Washers B-2 Miscellaneous uts Machine crew uts, Wing uts & Cap uts Assortmen B-2 Fasteners Cap uts B-10 Coupling uts B-11 Flange uts tover B-5 eavy ex uts B-10
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8
Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless
Using Dividing Plates with the Rotary Table
The premier source of parts and accessories for mini lathes and mini mills. Using Dividing Plates with the Rotary Table Dividing plates allow you to precisely divide a circle into a number of divisions
HYDRAULIC MOTORS MTM APPLICATION OPTIONS CONTENTS EXCELLENCE GENERAL
HYDRAULIC OORS APPLICAION» Skid Steer Loaders» etal working machines» renchers» Augers» Agricultural machines» Road building machines» Special vehicles» ine machines» Woodworking and sawmill machinery»
APPLICATION. Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries
HYDRAULIC APPLICATION Conveyors Metal working machines Machines for agriculture Road building machines Mining machinery Food industries Special vehicles Plastic and rubber machinery etc. CONTENTS Specification
AVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
F OVERHEAD CONSTRUCTION & STRINGING EQUIPMENT WIRE GRIPS WIRE GRIPS SELECTION CHART PATENTED HI-TOOL TRIGGER GRIP
WIRE GRIPS All models are fitted with swing down safety latch, with most models including a patented one handed trigger grip as standard. Convenient sized and special shaped pulling eyes to suit all brands
Peter Faust Ball transfer Units
Peter Faust Ball transfer Units http://ww.kugelrollen-faust.de We carry ball transfer units in various designs: Steel massiv, with or without flange, Sheet steel with polyamide ball and designs in stainless
-for information only- noncommittal. Axial Piston Variable Pump A10VSO RA / /24. Technical Data Sheet
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO Technical Data heet ize 71... 180 eries 32 Nominal pressure 4000 psi (280
VTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
KM/31000 (Stainless steel end plates) Air bellows, single acting
KM/ (Stainless steel end plates) > > Ø... / inch (... mm) > > Very easy to install no alignment problems > > Almost frictionless operation > > No maintenance or lubrication > > Typical applications; actuator,
Heat Transfer Effect of Inert Gas on Multi-Tubular Reactor for Partial Oxidation Reaction
Korean J. Chem. Eng., 18(2), 184-189 (2001) Heat Tranfer Effect of Inert Ga on Multi-Tubular Reactor for Partial Oxidation Reaction Kwang Ho Song, Sang Eon Han and Kwang-Ho Park LG Chem Reearch Park, LG
JUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
Pressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
Orbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH Contents Revision View Date Page Changed Revision Mar 26 Small updates B Jun 27 all Major revision with new lit-number (minus
Technical Information Cleanfit CUA451
TI00369C/07/EN/13.13 71238305 Products Solutions Services Technical Information Cleanfit CUA451 Manually operated retractable assembly for water, wastewater and process media Application Drinking water
SERIES A24 RAISED RIB
SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance
DIFFERENTIAL PRESSURE REGULATING VALVE
Y- DIFFERENTIAL PRESSURE REGULATING VALVE zon body material pressure diameter max. temperature brass 6 bar -50 according to the pressure equipment directive 4/68/UE does not require E marking FEATURES
STAINLESS STEEL INOX
TAINLE TEEL 1 D1 PI...U-N/I D BALL JOINT END I 1 D2 L D3 D IO 1-K HOUING ATERIAL: TAINLE TEEL AII BEARING ATERIAL: TAINLE TEEL AII C PTE ABRIC PI 5U - N/I PI 6U - N/I PI 8U - N/I PI 10U - N/I PI 10.1U
RR 16 Commercial & Industrial Regulator
RR 16 Commercial & Industrial Regulator The RR 16 regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants, as well as for all installations where accurate
4400 TwinHybrid Gas Seal
4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general
PNEUMATIC TENSIONER MODEL A
OPERATION MANUAL / SPARE PARTS LIST PNEUMATIC TENSIONER MODEL A452.0001 13.4210.01 CE Declaration of conformity 13421001.en/MAS/ 05.06 We declare that the machine A452 is in conformity with the following
E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP
ARI-DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 ARI-DP32 / DP33 Pneumatic actuator Page 2 DP-Actuator Extended stem on air failure ARI-DP34 Pneumatic actuator Page 2 ARI-DP34T Pneumatic actuator Page 6
G1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
ORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm.
Sizes 85 Weight 1.35 kg Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm Ring diameter I.D. Assembly appr. ø 10 mm.. ø 120 mm Application example Automatic machine for the internal or external assembly
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.
Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs
EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2011 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW
COMPONENT SPECIFICATION M80-7XX SERIES CONNECTORS - THREE ROW JUN 200 CONTENTS: SECTION TITLE PAGE Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings
pneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
E 084 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 80 l/min / 21.1 gpm
Return-Suction Filters E 08 Tank top mounting Connection up to G / -6 SE Nominal flow rate up to 80 l/min /. gpm Description pplication For operation in units with hydrostatic drives, when the return flow
E SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description
4 Ω-1 Ω Series Proportional Electro-ydraulic This relief and flow control valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since this valve controls
Float valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
Orbital Motors Type OMP X and OMR X
Technical Information Orbital Motors Type OMP X and OMR X powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev January 218 Major revision. 21 February 217 First edition. 11 2
Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series)
Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, sandwich
OPERATING INSTRUCTIONS
0/05 OPERATING INSTRUCTIONS for gas pressure regulators PN0 with integrated slam shut valve (SSV) and integrated limited capacity safety relief valve (RV) MR 25 F0, MR 25 SF0 p e 20 kpa - 0 MPa (0,2-0
Fixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
Gas Pressure Regulator HON 300
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction
Gas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998
Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
Differential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
OR-V 41 P BETRIEBSANLEITUNG DEUTSCH ENGLISH FRANÇAIS ITALIANO MODE D'EMPLOI ISTRUZIONI PER L'USO
DEUTSCH ENGLISH FRANÇAIS ITALIANO 3 10 17 24 BETRIEBSANLEITUNG OPERATING INSTRUCTIONS MODE D'EMPLOI ISTRUZIONI PER L'USO OR-V 41 P Ab Serie-Nr. 200 From serie no 200 A partir du no de série 200 A partire
Pressure switches for air and water CS
Data sheet Pressure switches for air and water CS CS pressure switches have a built-in pressure operated, three-pole switch. The contact position of which depends on the pressure in the connector and the
Annex to the certificate concerning the examination of conformity No. KP 067/2 dated
Annex to the certificate concerning the examination of conformity No. KP 067/2 dated 2013-09-09 1 Scope of application 1.1 Traction drive lifts and indirect acting hydraulic lifts, falling within the scope
Gas Pressure Regulator RMG 201
Product information serving the gas industry worldwide Application, characteristics, technical data Application application in industrial stations for small flowrate regulating lines in gas pressure regulating
Technical Data Sheet. R&M Closures
R&M Closures About this data sheet Edition 3.0 This document has been drafted with utmost care and reflects the products July, 2013 engineering level at the time of publication. Amendments or corrections
STAD-C. Balancing valves DN 15-50
STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated
Flail Mowers FM2060 & FM2072
Table of Content Flail Mower FM2060 & FM2072 17962! 309-100M Operator Manual Read the Operator manual entirely. When you ee thi ymbol, the ubequent intruction and warning are eriou - follow without exception.
FRIGOFLEX is an innovative system designed for the conveyance of R134, R404, R407, R410 refrigerant gases and other specific fluids.
FRIGOFLE is an innovative system designed for the conveyance of R14, R404, R407, R410 refrigerant gases and other specific fluids. This system consists of a flexible multilayered polymeric pipe and a series
NEW TYPE M PRESSURE RELIEF DEVICE
NEW TYPE M PRESSURE RELIEF DEVICE M PRESSURE RELIEF DEVICE ACCORDING TO EN 50216-5/A2 PATENTED 2 PRESSURE RELIEF DEVICE TYPE 50 M Section A-A 170 139 Transformer tank F 41.5 3 ø48.3 ø166 A P.R.D. TAG A
These products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have