IE 366. Chapter 14. Handtools
|
|
- Wilfred Payne
- 5 years ago
- Views:
Transcription
1 Chapter 14 Handtools
2 Handtools Extend the capability of the hand Selection criteria: What the tool can do How the tool is used
3 Guideline 1: Use Special-Purpose Tools IE 366 Benefit: Performs well tasks that are repeated many times/week Costs: Capital, maintenance, utility Analysis: Estimate years of use and usage/year Divide total cost by usage Compare to savings Tool Selection Base on detailed analysis, not just capital cost. Benefits include savings beyond just labor savings (capability, quality, etc.)
4 Handtool Selection Steps 1.Do a job analysis. 2.Identify tool-use issues: Operating forces Repetitions per minute or per shift Postures Workpace 3.Select the right tools.
5 Guideline 2: Design Tools to Be Used by Either Hand IE 366 The tool should be in the user s preferred hand. Strength, dexterity, and performance are greater for the preferred hand. Benefits: Includes the 10% of the population that is left-handed. Allows non-preferred hand to be used when the preferred hand is engaged or resting.
6 Handgrip Strengths IE 366
7 Gloves Protect the hand against abrasion impact chemicals heat, cold cuts, infection vibration. Decrease force grip. May decrease manual dexterity increase assembly time.
8 Guideline 3: Power with Motors More Than with Muscles IE 366 Mechanical energy is 10 to 1000 times cheaper than human. Motors extend capability and do not fatigue. Motors permit a larger percent of workforce to do the job.
9 Reducing Hand Arm Vibration Syndrome IE 366 Use a process with zero or low operator vibration. Use equipment with low levels of vibration. Use equipment with vibration-isolated handles. Avoid resonance. Furnish vibration-isolated gloves. Encourage workers to follow VS-reducing practices.
10 Guideline 4: Use the Proper Grip IE 366 Power grip Semipower grip Precision grips
11 Power grip Tool handle perpendicular to the forearm axis. Direction of force: Parallel to forearm At an angle to forearm Applied as torque about forearm
12 Power Grip IE 366
13 Semipower Grip Fingers act as a group but thumb position changes. Oblique grip: thumb aligned along tool axis Hook grip: fingers wrap around tool, thumb is passive Hook grips are preferable to pinch grips.
14 Precision Grip Has about 20% strength of a power grip. Internal precision grip (e.g. table knife) External precision grip (e.g. pencil) Forearm or tool may be supported.
15 Guideline 5: Make the Grip the Proper Thickness, Shape, and Length IE 366 Hand Sizes Are larger with gloves. Tend to be larger for men than for women. Grip Diameter For power grip, 35 mm to 45 mm is optimal. For precision grip, use 9.5 mm to 12.7 mm.
16 Grip Shape Section Perpendicular to Grip Axis Prevent rotation and slippage. Use thumb conoid (tab) or noncircular cross-section. Improve coefficient of friction of handle. Section Along Tool Grip Axis Keeps tool from moving forward and backward in hand. Allows force exerted along tool axis to be greater. Can act as a shield.
17 Grip Shape (cont.) Length For power grip, all fingers must make contact. For external precision grip, shaft must be supported. For internal precision grip, tool must extend past palm but not as far as wrist.
18 Guideline 6: Make the Grip Surface Smooth, Compressible, and Nonconductive IE 366 Smoothness reduces pressure points. Compressibility minimizes pressure on the hand. Nonconductivity reduces heat and cold problems and risk of electric shock.
19 Guideline 7: Consider the Angles of the Forearm, Grip, and Tool IE 366 Angle Keep the wrist in neutral position. Best angle varies with posture. Consider changing the job to improve angle. Consider pistol-grip or bent tools. Clearance Increase distance from hot surfaces to reduce burns. Provide shield from heat. A narrow neck reduces heat transfer. Avoid pinching risk with repetitive-use tools.
20 Joint Angles Source: Canadian Centre for Occupational Safety and Health, OSH Answers: Ergonomics, last accessed 19 May 04
21 Guideline 8: Use the Appropriate Muscle Group IE 366 Muscle Direction Strengths and ranges of motion differ. Consider normally-open tools. Give muscle something to push against. Muscle Size Consider moment arm. Provide power grip.
22 Guideline 8 (cont.): Use the Appropriate Muscle Group IE 366 Use the Appropriate Muscle Group One versus Many Use fingers in combination. Pinch types vary greatly in strength.. Consider trigger strips instead of buttons. Consider alternate types of triggers. Rotate Inward Hand and arm can rotate 70º clockwise, 150º counterclockwise. Muscle Time Reduce time the muscle is used. Use clamping tools, locking triggers, discrete controls, straps. Consider guides or funnels for positioning.
23 Examples IE 366
24 Knives Source: Intercodev, last accessed 19 May 04
25 Knife with upright handle Source: Intercodev, last accessed 19 May 04
26 Knife with upright handle Source: Intercodev, last accessed 19 May 04
27 Ergonomic Pliers Source: Wiha Quality Tools, last accessed 16 Nov 09 27
28 Wire Stripping Pliers Source: MichaelHoligan.com, last accessed 19 May 04
29 Scissors Source: Intercodev, last accessed 19 May 04
30 Scissors Source: Intercodev, last accessed 19 May 04
31 Handles Source: Intercodev, last accessed 19 May 04
32 Ratchet Screwdriver Source: Lara Specialty Tools, last accessed 19 May 04
33 Ratchet Screwdriver Source: Pro skit, New Product Release, last accessed 19 May 04
34 Hammers Source: ContractorsTools.com, last accessed 19 May 04
35 Coiled-Handle Hammer Source:NIOSH/Ergonomic Interventions in Ship Building/Coiled Hammer Handle, last accessed 19 May 04
36 Ergonomic Hand Tools Links humantech Vendorweb NIOSH Guide 36
GUIDELINE for MSD Hazard Control Measures
APPENDIX C GUIDELINE for MSD Hazard Control Measures This MSD Control Measures guideline document will help you eliminate or reduce musculoskeletal disorder hazards identified by the MSD Hazard ID Form.
More informationHuman Strength Data Tables 10/24/06
Push: Pushing forward in pounds on a round knob (59mm) at various heights using 1 preferred hand. Free posture is unrestricted. Standard posture has one foot 30 cm in front of the other and elbow at 90
More informationLab 7 Rotational Equilibrium - Torques
Lab 7 Rotational Equilibrium - Torques Objective: < To test the hypothesis that a body in rotational equilibrium is subject to a net zero torque and to determine the typical tension force that the biceps
More informationTHERAPUTTY ACTIVITIES
THERAPUTTY ACTIVITIES Theraputty activities will help to develop your hand strength and ability to control fine finger movements. Activities to be complete: (therapists to tick which activity you want
More informationMSD Risk Assessment Checklist
MSD Risk Assessment Checklist Purpose This MSD Risk Assessment Checklist is designed to provide you with a relatively quick and easy way to more formally assess the risk associated with exposures to some
More information"HAND, WRIST AND FINGER SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "HAND, WRIST AND FINGER SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR
More informationASSESSING AND CONTROLLING MANUAL HANDLING RISK
ASSESSING AND CONTROLLING MANUAL HANDLING RISK Location of task: Description of manual handling task: Date of assessment: Persons doing assessment: Work area management rep: Work area H&S rep (or deputy):
More informationThe Golf Swing. The Fundamentals
The Golf Swing The Fundamentals Fundamental #1 Grip & Set-Up The grip and set-up should be viewed as putting parts of a machine together. The right parts connected in the right way will allow the machine
More informationRisk Services Best Practices Bulletin Food Preparation Presented by Office of the President Risk Services May 2012
Food Preparation Presented by Office of the President Risk Services May 2012 Throughout the UC system, dining staff are among the highest occupational groups at risk for injury. Their high frequency and
More informationP-2B & MP-2B SERIES POWER TOOL ANALYZER
Operation & Service Manual 823000 2/01 P-2B & MP-2B SERIES POWER TOOL ANALYZER XX-2 B Series: Generation: Order Number: P-2 Inch Pounds (0-20) B Second 810681 Newton-Meters (0.0-2.0) MP-2 Centimeter-Kilograms
More informationThumb Shifter Plus Thumb Shifter
(English) DM-SL0004-01 Dealer's Manual Thumb Shifter Plus Thumb Shifter Thumb Shifter Plus SL-FT55 SL-TX50 SL-TX30 Thumb Shifter SL-TZ20 IMPORTANT NOTICE This dealer's manual is intended primarily for
More informationInstructional Manual
Instructional Manual TABLE OF CONTENTS MEDICUS Dual 2000 Instructional Manual The Proper Grip 1 Posture, Stance & Alignment 2 Breakpoint 1: Takeaway 3 Breakpoint 2: Toe-up Position 4 Breakpoint 3: Setting
More informationFinal Assembly Instructions Bikes with Quill Stems
Final Assembly Instructions Bikes with Quill Stems Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our expert
More informationAppendix 23- A: Physical Risk Factor Ergonomic Checklist
The Physical Risk Factor Ergonomic Checklist is a tool used in work places to identify and evaluate ergonomic stressors. The checklist can be used for typical work activities, which are a regular and foreseeable
More informationHow to Swing a Driver
How to Swing a Driver Instruction set for beginning golfers By Mike Buzzell Pictured: John Daly, also known as Long John, was the first PGA Tour player to average 300 yards per drive. He won two Major
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationManual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift
Manual Lifting: The NIOSH Work Practices Guide for Manual Lifting Determining Acceptable Weights of Lift Job Description Gary S. Nelson, Henry Wickes, and Jason T. English Cartons of product are accumulated
More information"HAND, WRIST AND FINGER SAFETY"
PRESENTER'S GUIDE "HAND, WRIST AND FINGER SAFETY" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM
More informationShifting Lever. Dealer's Manual. RAPIDFIRE Plus SL-M2000 SL-M3010 SL-M4010. Thumb Shifter SL-TZ500. ROAD MTB Trekking. City Touring/ Comfort Bike
(English) DM-MDSL001-01 Dealer's Manual ROAD MTB Trekking City Touring/ Comfort Bike URBAN SPORT E-BIKE Shifting Lever RAPIDFIRE Plus SL-M2000 SL-M3010 SL-M4010 Thumb Shifter SL-TZ500 CONTENTS IMPORTANT
More informationMSD RISK ASSESSMENT. Risk Factor "Potential Risk" "High Risk" Contact Stress Repetition Grip Force Lift/Lower Force Awkward Posture Vibration WSPS.
Job or Task: Date: Completed by: Once a potential risk of a musculoskeletal disorder (MSD) has been identified, the purpose of this risk assessment is to determine if a high risk of injury exists. We recommend
More informationSoftball Pitching Mechanics
Softball Pitching Mechanics When teaching softball pitching mechanics, the best way to avoid injury, develop consistency, and see results is through repetition and attention to detail. Even a slight change
More informationMANUAL OF ARMS FOR THE RIFLE (M-1 GARAND) POSITION OF ORDER ARMS
MANUAL OF ARMS FOR THE RIFLE (M-1 GARAND) In describing the manual of arms, the term, at balance, refers to a point on the rifle just forward of the trigger housing. Whenever a position is described as
More informationDM-RD (English) Dealer s Manual. ROAD Rear Derailleur RD-9000 RD-6800 RD-5800 RD-4700
(English) DM-RD0003-09 ROAD Rear Derailleur Dealer s Manual RD-9000 RD-6800 RD-5800 RD-4700 CONTENTS IMPORTANT NOTICE...3 TO ENSURE SAFETY...4 LIST OF TOOLS TO BE USED...6 INSTALLATION...8 Chain length...
More informationCorporate Standard Manual Handling HB#
Contents Contents... 1 Functional Flowchart... 1 Objective... 1 Scope... 1 Definitions... 1 Responsibilities... 2 OH&S Systems Manager... 2 Station / Site Manager... 2 Workers... 2 Hazards... 2 Inspections
More informationWorkWell Consulting Ergonomic Risk Identification & Assessment. Job Title: Equipment Operator III (Sweeper) Elgin Ford #2108 Date: September 17, 2003
TASK ANALYSIS WORKSHEET Company: The Corporation of Delta Department: Engineering Operations Job Title: Equipment Operator III (Sweeper) Elgin Ford #208 Date: September 7, 2003 Job Summary: The Sweeper
More informationBuckingham Mfg. Co., Inc. OX BLOCK TM Instructions and Warnings
OVERVIEW The Buckingham OX BLOCK is a rope snatch block with an integrated friction bar used for lowering loads, snubbing loads, and raising loads. It allows the rigging professional to handle loads with
More information2990 Lorne Scots Royal Canadian Army Cadet Corps Rifle Drill
2990 Lorne Scots Royal Canadian Army Cadet Corps Rifle Drill Page 1 of 27 TABLE OF CONTENTS PARA ITEM PAGE Section 1 BASIC RIFLE DRILL 1.1 INTRODUCTION 3 1.2 ATTENTION 5 1.3 STAND AT EASE FROM ATTENTION
More informationErgonomic Assessments of the Melni Splice Connector and the Traditional Cable Splice Method
Ergonomic Assessments of the Melni Splice Connector and the Traditional Cable Splice Method April 3, 2015 Prepared for: Melni, LLC 265 Ash St. N. Twin Falls, ID 83301 Prepared by: Lee T. Ostrom, Ph.D.,
More informationBuckingham Mfg. Co., Inc. OX BLOCK TM Instructions and Warnings
OVERVIEW The Buckingham OX BLOCK is a rope snatch block with an integrated friction bar used for lowering loads, snubbing loads, and raising loads. It allows the rigging professional to handle loads with
More informationMTSU Drumline Audition guidelines and criteria 2011
MTSU Drumline Audition guidelines and criteria 2011 Thank you for your interest in the MTSU Band of Blue Drum line! We take great pride in the Band of Blue and are really looking forward to a terrific
More information632 AccuPro Set-up & Operation
632 AccuPro Set-up & Operation Always check: Reel & Roller bearings Bent or broken blades Make sure the reel spins freely in the frame Place the Reel Into the Machine There are three lifting options for
More informationNEW EMPLOYEE ERGONOMIC WORKSHEET
NEW EMPLOYEE ERGONOMIC WORKSHEET DIRECTIONS New Employee: This document has been prepared to assist you and your supervisor in determining some of the items that you may need. After you have had an opportunity
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationMUSKET MANUAL OF ARMS FOR THE
MANUAL OF ARMS FOR THE MUSKET 414. This manual differs in so many respects from that of the rifle and rifle musket that it becomes necessary to specify it for the use of infantry troops armed with the
More informationPARTNER With all partner stretches: communicate with partner and use caution!!
- warm up prior to stretching - isolate the muscle group to be stretched - move slowly and smoothly into stretch - use proper mechanics and correct alignment - breathe normal - slowly come out of stretch
More informationOffice Ergonomics Standard
This standard outlines general workstation and work practices to be followed in order to reduce the risk factors for developing musculoskeletal injuries (MSIs) and visual strain from working at computer
More informationFinal Assembly Instructions Bikes with Threaded Headsets
Final Assembly Instructions Bikes with Threaded Headsets Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final assembly. Prior to shipping, our
More informationRIFLE DRILL. 1. General. Before commencing instruction in rifle drill, it is important that the cadets receive instruction in the parts of the rifle.
RIFLE DRILL 1. General. Before commencing instruction in rifle drill, it is important that the cadets receive instruction in the parts of the rifle. 2. Rifle Movements. Unless stated otherwise, cadets
More informationPhysical Demands Analysis
Alberta Construction Safety Association Physical Demands Analysis Development Partners Industrial Electrician Task 8: Termination of Large Conductors VIDEO CLIP Acknowledgement The Alberta Construction
More informationGoverned Models FRONT EXHAUST
Model 4710 GLS with Erickson Collet Front exhaust not shown Governed Models FRONT EXHAUST 34 MODELS 4710 GL 4710 GLS Governed Models SIDE EXHAUST 35 MODELS 4721 GL 4721 GLS Model 4721GLS with Erickson
More informationThe BIG BOOK of Golf Drills
The BIG BOOK of Golf Drills 1 How to Use This Guide Congratulations on purchasing the Big Book of Golf Drills! This book is designed to use as a reference guide. We do not recommend printing this out as
More informationSprinting. Relevant Knowledge** Overall Level. Assessment Criteria. Learning Outcomes
Sprinting 1. coordinate their limbs. 2. be familiar with the starter s order.. swing their arms in rhythm. 1. coordinate their limbs. 2. swing their arms in rhythm.. react accurately to signals.. master
More informationTechniques To Treat Your Pain At Home (512)
Techniques To Treat Your Pain At Home (512) 288-5322 7010 W. TX-71 Suite 360 Austin TX, 78735 Arm Only Bird Dog Start in the quadruped position (all fours) with arms and thighs perpendicular to the floor.
More informationKAYAK TECHNICAL TEMPLATE. Scott Oldershaw National Team Coach
KAYAK TECHNICAL TEMPLATE Scott Oldershaw National Team Coach Revised 09/2009 Introduction This Kayak Technical Template is for coaches involved with athletes preparing for competition at the Canada Games,
More informationBicycle Power Research and Design Factors
Bicycle Power Research and Design Factors Background Summary: Human powered machinery is a great way to supply energy to a machine where electricity is not readily available or reliable. In designing the
More informationShoulder Exercises for Combined Labrum Repair Rehabilitation Protocol
Shoulder Exercises for Combined Labrum Repair Rehabilitation Protocol The exercises illustrated and described in this document should be performed only after instruction by your physical therapist or Dr.
More informationUniversity of Missouri marching mizzou. drumline. audition packet
University of Missouri marching mizzou drumline audition packet Congratulations! By downloading this packet you have taken your first step in becoming a member of the Marching Mizzou Drumline for the 2016
More informationManual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
More informationMARCH CORE REFRESHER HSE TOOL BOX
MARCH CORE REFRESHER HSE TOOL BOX PPE & HAND SAFETY SELECTION OF PERSONAL PROTECTION EQUIPMENT Once it has been determined that personal protection equipment is to be used; select the protective equipment
More informationThrower s Maintenance Program
Thrower s Maintenance Program Elbow at 90 and fixed at side. Pull out with arm keeping elbow at side Elbow at 90 and fixed at side. Pull arm into body keeping elbow at side. Shoulder at 90 and elbow at
More informationThe Three Swings of Wright Balance: Which One Are You?
The Three Swings of Wright Balance: Which One Are You? Our 25 years of research has yielded the following. In summary we are able to do simple body measurements, provide a student with Stance Widths that
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Replace a Light Ballast Job Title(s) Performing Task: Electrician, Maintenance
More informationRJT. Pupil Task Cards: Throwing JUMP THROW RUN
RJT s: Throwing RUN JUMP THROW s: Introduction Introduction to the s An important part of every child s cognitive development is to encourage them to explore new things and use self-guided learning to
More informationJob: Wheat Specialty Description: Loads grain into ships hatches and levels off load Equipment Assessed: AGT semi-automated operation and PECO at JRI
Job: Wheat Specialty Description: Loads grain into ships hatches and levels off load Equipment Assessed: AGT semi-automated operation and PECO at JRI ESSENTIAL DUTIES 1. Loading Grain A. Semi-Automated
More informationThe following lesson is excerpted from
The following lesson is excerpted from A Fresh Approach to the Snare Drum is the most comprehensive method available that simultaneously provides instruction for rhythm reading, technique fundamentals,
More informationManual Tasks Minimum Standard. October, 2014
Manual Tasks Minimum Standard Manual Tasks Minimum Standard October, 2014 Contents 1 Executive Summary... 2 2 More Information... 2 3 Using this Standard... 2 4 Managing Risk... 2 4.1 Consultation... 2
More informationPrepared by: Jennifer Yorke B. Sc. (Hons Kin) Completed: August 18, 2006 Traffic, Line & Utility - Task Analysis
Job Task Brief Task Analysis Materials Handling - Gather items for the task from the warehouse - Place the materials into the truck - Drive to the worksite - Unload the equipment at the site as necessary
More informationWAC Appendix B: Criteria for analyzing and reducing WMSD hazards for employers who choose the Specific Performance Approach.
For each "caution zone job" find any physical risk factors that apply. Reading across the page, determine if all of the conditions are present in the work activities. If they are, exists and must be reduced
More informationTennis Elbow is currently one of the most diagnosed conditions in the western world. It is extremely common, and can be excruciatingly painful.
43 Thames Street, St Albans, Christchurch 8013 Phone: (03) 356 1353. Website: philip-bayliss.com Tennis Elbow Tennis Elbow is currently one of the most diagnosed conditions in the western world. It is
More informationJAECO/Rancho MultiLink. Mobile Arm Support (MAS) System
JAECO/Rancho MultiLink Mobile Arm Support (MAS) System Instructions for Setup and Functional Adjustments June 11, 2004 Funded by National Institute for Disability & Rehabilitation Research (NIDRR) Developed
More informationDojo Front Ensemble Audition
Dojo Front Ensemble 2013 Audition Approaching the Keyboard: The general idea for approaching the keyboard is to have a confident stance stemming from correct posture and keyboard height. Clearly defined
More informationTennis Elbow (Lateral Epicondylitis)
Tennis Elbow (Lateral Epicondylitis) What is a Tennis elbow? Tennis elbow or lateral epicondylitis is a term that is used to describe pain on the outside of the elbow joint. It is caused by a strain to
More informationErgonomics: Assessments and Evaluations for Job Improvements. Travis Ellis, CSP, CHMM
AND/OR AND/OR AND = Force Awkward Posture Repetition Long Duration Increased Ergo Risk Ergonomics: Assessments and Evaluations for Job Improvements Travis Ellis, CSP, CHMM Course Objectives: 1. Identify
More informationGood Pipetting Practice
Good Pipetting Practice The Ergonomics of Pipetting Forces are Affected by Pipette Selection The process of pipetting is well understood by scientists around the world. Pipettes are ubiquitous, providing
More informationDISCOVERY PRO - features
DISCOVERY PRO DECEMBER, 2010 DISCOVERY PRO - features The ultimate pipette for tough market reality To match leader s ergonomics and performance.ultra light weight and extremaly low pipetting forces Outstandingly
More informationDID YOU KNOW... PUTTER GRIPS. The revolutionary P2 Putter Grip is scientifically proven to improve your putting Period!
PUTTER GRIPS The revolutionary P2 Putter Grip is scientifically proven to improve your putting Period! DID YOU KNOW... The putter face angle determines 83% of the starting line while putter path determines
More informationForce Vectors SHOT PUT MECHANICS
SHOT PUT MECHANICS The shot put is an individual event that is dominated by big, powerful male and female athletes. There are two techniques for throwing the shot put---the glide and rotation--. Neither
More informationMARCHING TENOR TECHNIQUES
MARCHING TENOR TECHNIQUES Tenor drums usually consist of 4-6 drums, having four main drums (usually some combination of 8", 10",12",13", or 14" drums) and sometimes 1 to 2 "spock" or accent drums which
More informationWhat s different about P2 grips?
What s different about P2 grips? The key feature of the P2 putter grip is the patented positioning of the shaft within the grip. Unlike any other putter grip where the shaft is positioned through the centre,
More informationWheelchair Basketball Canada. November 2011 Toolbox
Wheelchair Basketball Canada November 2011 Toolbox All Materials Copyright Wheelchair Basketball Canada 2011 Preparation 1. Keep the body balanced above the axles and centred in the chair (body upright,
More informationSAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM
SAFETY RULES WARNING: READ THESE SAFETY RULES & OPERATORS MANUAL BEFORE HANDLING YOUR FIREARM Never point a firearm at anyone and always keep the muzzle pointed in a safe direction. Always treat all firearms
More informationStretching & Marching Sequence Chart - General
Stretching & Marching Sequence Chart - General Exercise Description Counts Segment Warmup # Breathe and Stretch (2x) Breathe in 16 Head Roll (2x) Right, back 32 Shoulder Rotation (x + x) Up, down, up,
More informationFeature Picture Example Description Use Task Examples
3.3.1 Features Click on the features icon to enter the features. The features are the hand positions and grips that can be programmed onto your i-limb ultra revolution and triggers are the muscle signals
More informationMillennial Walker A multi-functional, elderly assistance walker with improved posture, comfort, and folding capabilities.
Millennial Walker A multi-functional, elderly assistance walker with improved posture, comfort, and folding capabilities. Background & Research Question There are many different styles and categories when
More informationAb Plank with Straight Leg Raise
Ab Plank with Straight Leg Raise Position yourself face up with your knees bent at 90 degrees, feet flat on the floor. Your hands should be directly under your shoulders facing forward. While in this position
More informationTennis Elbow Solution Copyright 2008. TennisElbowSolution.com. All rights reserved. No portion of this manual or its supporting documents may be used, reproduced or transmitted in any form or by any means,
More informationCoaching Principles. 1. Introduce 2. Demonstrate 3. Explain 4. Organize 5. Execute 6. Correct 7. Practice
5 Pin Bowling Drill Book Updated August 2008 Coaching Principles STEPS IN TEACHING A DRILL 1. Introduce 2. Demonstrate 3. Explain 4. Organize 5. Execute 6. Correct 7. Practice GENERAL PRINCIPLES Drills
More informationUpper Body: Range of Motion Exercises for the Arms - Passive Reviewed April 2018
Upper Body: Range of Motion Exercises for the Arms - Passive Reviewed April 2018 Author: Marc Fischer Author: Heidi C. Fischer Author: Catherine J. Pritchard Author: Kelsey Watters, OTR/L Author: Kimberly
More information1. POST: Options FRAME: Options 1-3
Name: Date: Class Number: Score: /10 GO / NO-GO UNITED STATES ARMY COMBATIVES COURSE Basic Combatives Course Technical Evaluation 1. POST: Options 1-3 Performance Steps (Must pass 5 of 7) GO NO-GO Student
More informationGOLF SPECIFIC DYNAMIC WARM UP
GOLF SPECIFIC DYNAMIC WARM UP Golf-related injury is common. The three most common areas injured include: 1. The back 2. The wrists, and 3. The elbows. A golf-specific dynamic warm-up is recommended by
More informationEXPERIMENTAL STUDY OF EXOSKELETON FOR ANKLE AND KNEE JOINT
EXPERIMENTAL STUDY OF EXOSKELETON FOR ANKLE AND KNEE JOINT PROJECT REFERENCE NO. : 37S0925 COLLEGE : NEW HORIZON COLLEGE OF ENGINEERING, BANGALORE BRANCH : MECHANICAL ENGINEERING GUIDES : DR GANESHA PRASAD
More informationGolf Stretches and Flexibility Exercises
43 Thames Street, St Albans, Christchurch 8013 Phone: (03) 356 1353. Website: philip-bayliss.com Golf Stretches and Flexibility Exercises The game of golf may have originated in Scotland. Avid players
More informationShot Put - Glide Technique by Rob Lasorsa, M-F Athletic
Shot Put - Glide Technique by Rob Lasorsa, M-F Athletic SHOT PUT GLIDE TECHNIQUE *ALL MOVEMENTS CONSIDER A RIGHT HANDED THROWER* GRIP, CARRY, RELEASE GRIP CARRY THROW INTO THE GROUND KNEELING THROW #1
More informationBelton High School Marching Fundamentals 2016
Belton High School Marching Fundamentals 2016 Fundamentals of Teaching Fundamentals: 1. Say the name of the maneuver (INSTRUCT) 2. State its purpose (INSTRUCT) 3. Demonstrate it slowly, several times,
More informationKey Terms. balance barrel bolt butt hand guard muzzle port arms sling stacking swivel stock trail arms trigger guard
Lesson 7 Stationary Movements with the M-1 Rifle Chapter 5 Key Terms balance barrel bolt butt hand guard muzzle port arms sling stacking swivel stock trail arms trigger guard What You Will Learn to Do
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationBasic Shooting Skills Positions. By: Shannon Carlton
Basic Shooting Skills Positions By: Shannon Carlton Agenda Introduction Dominant Eye Rifle Fitting Prone Position Rifle Fitting Tips Standing Position Sequences Checklists Positions Stable Comfortable
More informationMotion Studies. Motions Studies. Motion Studies. Motion Studies. Fundamental Motions. Therbligs
Motion Studies Motions Studies Definition - Careful analysis of the human body motions used while performing a specific job. Purpose - To eliminate or reduce inefficient movements and to facilitate and
More informationAEROBIC GYMNASTICS Code of Points APPENDIX II Guide to Judging Execution and Difficulty
FÉDÉRATION INTERNATIONALE DE GYMNASTIQUE FONDÉE EN 1881 AEROBIC GYMNASTICS Code of Points 2009 2012 DRAFT OCTOBER 2008 APPENDIX II Guide to Judging Execution and Difficulty Page 1 of 80 INTRODUCTION This
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
1. De-energize circuit serving the outlet following LOTO procedure (see pages 3 5). PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All
More informationKeyboard Guidelines. Approach
Keyboard Guidelines Approach When approaching a mallet instrument, make sure the instrument is at the appropriate height before setting your hands. The top of the keys should be at the same height as your
More informationNIOSH Equation Outputs: Recommended Weight Limit (RWL): Lifting Index (LI):
The NIOSH Equation is a tool used by occupational health and safety professionals to assess the manual material handling risks associated with lifting and lowering tasks in the workplace. This equation
More informationMHBYW Dynasty Program
MHBYW Dynasty Program Level 3: Red Skill Properly Executed? Comment Staggered/Square Stance Yes No Motion Yes No Starting Positions Neutral Yes No Top Yes No Bottom Yes No Four Defensive Stops Yes No Head,
More informationMARINE CORPS INSTITUTE INSPECTION AND REPAIR OF THE M9 PISTOL
MARINE CORPS INSTITUTE INSPECTION AND REPAIR OF THE M9 PISTOL MARINE BARRACKS WASHINGTON, DC Table of Contents Page Contents... Navigation Instructions... i iii Chapter 1 Disassembly and Assembly of the
More informationRelated Elevator Products
37 SECTION 2 - Elevator Products Reeving Splices Related Elevator Products Reeving Splice Specifications PIN # Wire Rope Size Units per Carton Wt. per Carton (Lbs) Length (IN) Color Code 1119100012 3/8
More informationDiscus Technical Model
Discus Technical Model Progression related to Multi-Events Development (aged 8/9-12 years) can be referenced to Athletics 365 stages Red, Yellow & Green Whole Sequence Preparation Momentum Building Delivery
More information2672 Hastings & Prince Edward Regiment Royal Canadian Army Cadet Corps. Lee Enfield No.4. Rifle Drill
2672 Hastings & Prince Edward Regiment Royal Canadian Army Cadet Corps Lee Enfield No.4 Rifle Drill Extracts from A-CR-CCP-053/PT001 March 2005 TABLE OF CONTENTS PARA ITEM PAGE Section 1 BASIC RIFLE DRILL
More informationMSD HAZARD IDENTIFICATION FORM
MSD HAZARD IDENTIFICATION FORM Job Title Task Assignment Job Code (if used) Essential Safety Resources Location Location of Assessment Identification Applies to the Following Locations Date Completed by
More informationARCHERY & SCOUTING. PRESENTATION POINTS: Equipment & Safety Personal Safety Facility Safety 10 steps to good shooting
ARCHERY & SCOUTING PRESENTATION POINTS: Equipment & Safety Personal Safety Facility Safety 10 steps to good shooting Kathleen Millar, CAE, OCT NCCP Level 4 Coach EQUIPMENT SAFETY Stringing & Unstringing
More informationCHAPTER 4 ADVANCED GROUND-FIGHTING TECHNIQUES
(FM 21-150) CHAPTER 4 ADVANCED GROUND-FIGHTING TECHNIQUES After achieving an understanding of the basics of ground fighting, other elements of fighting on the ground are added. These techniques, however,
More information