Consumables for microsurgery

Size: px
Start display at page:

Download "Consumables for microsurgery"

Transcription

1 Consumables for microsurgery

2 Burs Reusable and sterile single use burs Tungsten carbide, stainless steel and diamond burs Shank diameter 5 mm Length: 70, 95, 125 mm Ø 0.6 mm Ø mm Ø mm Ø 3.5 mm Ø mm Ø 4.0 mm Ø mm Ø 4.5 mm Ø mm Ø 5.0 mm Ø mm Ø 6.0 mm Ø mm Ø 7.0 mm Diamond burs Coarse diamond burs 1 pce/box sterile single use 0.6 REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF Diamond burs Length 95 mm Length 125 mm 1pce/box sterile 1 pce/box 1 pce/box single use 0.6 REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF

3 Carbide burs 0.5 Carbide burs Crosscut carbide burs Length 95 mm 1 pce/box sterile 1 pce/box 1 pce/box single use REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF Conical carbide burs Length 50 mm 1 pce/box sterile REF REF single use REF REF Stainless steel burs Stainless steel burs Length 95 mm Length 125 mm 1pce/box sterile 1 pce/box 1 pce/box single use 0.5 REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF REF Stainless steel bur for Intranasal handpiece Length 125 mm 1 pce/box REF

4 Micro saw blades Sagittal, osseoscalpel, oscillating and compass High quality blades for precise cuts Extrathin blades for minimum bone loss Sagittal micro saw REF * B B Blades for sagittal micro saw B Thickness 12 pces/pack 4mm 10 mm 10 mm 15 mm REF REF REF mm 15 mm REF mm 27 mm REF mm* 10 mm REF *round peak Osseoscalpel micro saw REF Blades for osseoscalpel micro saw 12 mm 18 mm Thickness 12 pces/pack REF REF mm REF Tungsten file 1 pce/pack REF

5 Oscillating micro saw REF C ccessories for microsaws B Blades for oscillating micro saw B C Thickness 27 mm / usable length 11 mm 10 mm 15 mm 10 mm 15 mm 27 mm / usable length 11 mm 27 mm / usable length 11 mm 27 mm / usable length 11 mm 42 mm / usable length 26 mm 42 mm / usable length 26 mm 42 mm / usable length 26 mm 42 mm / usable length 26 mm 9 mm 9 mm 0.15 mm 1 pce/pack REF REF REF REF REF REF REF REF Locknut REF Screw chuck key REF Compass micro saw REF * Blades for compass micro saw Thickness 12 pces/pack 11 mm* 0.25 mm REF mm REF mm 0.25 mm REF mm 0.25 mm REF mm 0.25 mm REF *pointed model

6 Shaver blades Single use or reuseable ll blades sterile packed Straight or curved 15 / 40 / 60, convex or concave Double serrated, single serrated or smooth cut Usable length: 10 cm Double serrated Single serrated Smooth Single use straight shaver blades Double serrated Single serrated Smooth REF REF REF REF REF REF REF REF REF Reusable straight shaver blades Double serrated 1 pce/box 3.0 REF REF REF Can be dismantled for optimal cleaning

7 ccessories Concave Irrigation lines (10x) REF Convex Single use curved shaver blades Double serrated 4.0 Concave REF Convex REF Sterilization tray (without instruments) 400 x 60 x 250 mm (LxHxW) REF Single use curved shaver blades Double serrated Concave Convex 3.0 REF REF REF Bur holder for 16 tools, sterilizable REF Single use curved shaver blades Double serrated Concave Convex 3.0 REF REF REF Spraynet (6x) REF Lubrifluid (6x) REF

8 / / Printed in Switzerland by Witschi Bienir S Rue de l Ouest 2b CH2340 Le Noirmont Switzerland Tél.+41(0) Fax +41(0) surgery@bienair.com Bienir Italia s.r.l. Via Vaina Milano, Italia Tel. +39 (02) /52/54 Fax +39 (02) bai@bienair.com Bienir Deutschland GmbH Jechtinger Strasse Freiburg, Deutschland Tel. +49 (0) Fax +49 (0) bad@bienair.com Bienir España S Entença, 169 Bajos Barcelona, España Tel. (+34) Fax (+34) bae@bienair.com Bienir UK Limited 63, The Street Capel, Surrey RH5 5JZ, England Tel. +44 (0) (0) Fax +44 (0) bauk@bienair.com Bienir sia Ltd. NishiIkebukuro DaiichiSeimei Bldg. 10F Ikebukuro, Toshimaku Tokyo, , Japan Bienir US, Inc. Medical Technologies 5 Corporate Park Suite 160 Irvine, C 92606, US Phone BIEN Phone Fax bausa@bienair.com Bienir France Sarl 131, Boulevard Péreire Paris, France Tel. +33 (0) Fax +33 (0) baf@bienair.com Tel. +81 (3) Fax +81 (3) baasia@bienair.com Beijing Bienir Medical Instrument Technology Service Co. Ltd. Room 2106, The Exchange Beijing, No 118 Jian Guo Lu Yi, Chao Yang District, Beijing , China Bienir on Internet: Tel Fax babeijing@bienair.com

Consumables for microsurgery

Consumables for microsurgery Consumables for microsurgery Burs Reusable and sterile single use burs Tungsten carbide, stainless steel and diamond burs Shank diameter 2.35 mm Length: 44.5, 70, 95, 125 mm Ø 0.6 mm Ø mm Ø mm Ø mm Ø mm

More information

Mx2 system take control

Mx2 system take control 1 Mx2 system take control mx2 system welcome to a new dimension Bien-Air has positioned itself as the world leader in electric micromotors. And this has not happened by chance. Some have even revolutionised

More information

powered instruments... for precision small bone surgery

powered instruments... for precision small bone surgery powered instruments... for precision small bone surgery 1 TM MODULA HANDPIECES EPV-220 Air operated handpiece with rotary bur attachment ECV-220 Corded electric handpiece with sagittal saw attachment EPV-220

More information

JET SET SPORTS and COSPORT. Welcome you to the Paralympic Summer Games in Rio 2016!

JET SET SPORTS and COSPORT. Welcome you to the Paralympic Summer Games in Rio 2016! JET SET SPORTS and COSPORT Welcome you to the Paralympic Summer Games in Rio 2016! Overview Experience: Jet Set Sports and its sister company CoSport have more than 35 years of Olympic experience and have

More information

SINGLE USE PODIATRY INSTRUMENTS PACKS AND ACCESSORIES

SINGLE USE PODIATRY INSTRUMENTS PACKS AND ACCESSORIES SINGLE USE PODIATRY INSTRUMENTS PACKS AND ACCESSORIES www.susol.co.uk MD642415 441219 SINGLE USE THE CHOICE IS CLEAR Your trusted single use Podiatry brand is available to the NHS. Direct or via Bunzl

More information

The Open-Split Capillary Interface. Part No

The Open-Split Capillary Interface. Part No The Open-Split Capillary Interface Part No. 113532 2 INTRODUCTION With the advent of fused silica capillary columns and their high degree of flexibility, it is obviously attractive to be able to take the

More information

How much do customer returns cost you?

How much do customer returns cost you? TECHNOLOGY FOR GASES How much do customer returns cost you? Benefit from WITT s certified quality systems for leak detection of all types of packaging Keyword: HACCP ISO 000 approval for food safety LEAK-MASTER

More information

Modular OMF-System Cluster

Modular OMF-System Cluster 1200 1700 Modular OMF-System Cluster 2000 MONDE face The modular OMF-System Cluster consisting of three systems, has been especially designed for the osteosynthesis in cranio maxillofacial surgery and

More information

N SERIES PROCESS VACUUM PUMPS AND COMPRESSORS

N SERIES PROCESS VACUUM PUMPS AND COMPRESSORS N 186.1.2 SERIES PROCESS VACUUM PUMPS AND COMPRESSORS ADVANTAGES Twofold safety: The combination of a working diaphragm and an additional safety diaphragm prevents gas from escaping in the event of a fracture

More information

Milling Cutters & Saws

Milling Cutters & Saws Milling s & Saws Side Milling s High Speed Steel Plain & Tooth Plain 2 1/2 3/16 14 603220 2 1/2 1/4 14 603221 2 1/2 5/16 14 603222 2 1/2 3/8 14 603223 2 5/8 3/16 14 603224 2 5/8 1/4 14 603225 2 5/8 5/16

More information

Precise Finish. Fast Results. Easy to Use.

Precise Finish. Fast Results. Easy to Use. trimjet E Precise Finish. Fast Results. Easy to Use. The WINTERSTEIGER trimjet is an automatic edge grinding machine for skis and snowboards. Equipped with disc technology from the ski industry, the trimjet

More information

neska High-Speed Handpiece P320

neska High-Speed Handpiece P320 neska High-Speed Handpiece Instruction Manual for the ENESKA High-Speed Handpiece Made and sold by: JOISTEN & KETTENBAUM GmbH & Co. KG Surface finishing PO Box 10 03 52 D-51403 Bergisch Gladbach Asselborner

More information

skin expanders Recreating harmonious bodies for a new vision of rebirth.

skin expanders Recreating harmonious bodies for a new vision of rebirth. skin expanders Recreating harmonious bodies for a new vision of rebirth. For almost 30 years, Laboratoires Sebbin has designed and manufactured innovating solutions in the field of aesthetic and reconstructive

More information

DOPAG Material pressure regulator

DOPAG Material pressure regulator Metering Technology DOPAG Material pressure regulator Hilger u. Kern / Dopag Group Material pressure regulators for a reduced and continuous material pressure for all metering and dispensing applications

More information

DIAPHRAGM GAS SAMPLING PUMPS

DIAPHRAGM GAS SAMPLING PUMPS DIAPHRAGM GAS SAMPLING PUMPS DATA SHEET N 0150 N 0150 SP.9 E Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its central point

More information

S C I E N T I F I C. It s Easy! ONYX FINE INSTRUMENTS. f i n e i n s t r u m e n t s

S C I E N T I F I C. It s Easy! ONYX FINE INSTRUMENTS. f i n e i n s t r u m e n t s S e r v i n g B i o t e c h n o l o g y It s Easy! YX f i n e i n s t r u m e n t s ONYX FINE INSTRUMENTS ONYX Introduction INSTRUMENT MATERIAL INSTRUMENT QUALITY STAINLESS STEEL The name Stainless Steel

More information

Dräger Pendula Medical Supply Units

Dräger Pendula Medical Supply Units Dräger Pendula Medical Supply Units Ceiling mounted multiple monitor holder for a flexible and ergonomic workplace design and the easy and secure positioning of the monitor application in the hybrid OR.

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET N 186 N 186.1.2 ST.12 E Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, ixed on its edge, moves up and down

More information

AK 45. Installation Instructions Condensate Drain Valve AK 45. A Siebe Group Product 1

AK 45. Installation Instructions Condensate Drain Valve AK 45. A Siebe Group Product 1 AK 45 Installation Instructions 810467-00 Condensate Drain Valve AK 45 A Siebe Group Product 1 Capacity Chart [lb/h] [kg/h] 1000 2000 800 1 600 1000 500 400 800 300 600 500 200 400 Capacity 300 100 0.1

More information

Re-Tipping and Instrument Sharpening Information!

Re-Tipping and Instrument Sharpening Information! 4 4 Re-Tipping and Instrument Sharpening Information! Section One of Zoll-Dental s Catalog will detail the Complete Instrument Service Center. Included in this section are a full service price list and

More information

For Air Pressure. AP-30 Series. Digital Display & Digital Control. EASY-TO-SEE 2-color display. Two-color digital display pressure sensor

For Air Pressure. AP-30 Series. Digital Display & Digital Control. EASY-TO-SEE 2-color display. Two-color digital display pressure sensor Cat No AP3-KA-C Two-color digital display pressure sensor AP-3 Series Digital Display & Digital Control For Air Pressure EASY-TO-SEE 2-color display Green and red two-color LED display clearly shows abnormal

More information

High Pressure Heatable Liquid Cells GS05910, GS05915, GS05920, GS05925 Series User Manual

High Pressure Heatable Liquid Cells GS05910, GS05915, GS05920, GS05925 Series User Manual High Pressure Heatable Liquid Cells GS05910, GS05915, GS05920, GS05925 Series User Manual 2I-05910 Issue 7 High Pressure Heatable Liquid Cells GS05910, GS05915, GS05920, GS05925 Series User Manual 2I-05910

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET E 23 N 26.1 ANE Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its central

More information

Marsh & McLennan Companies Entities Covered by the BCRs

Marsh & McLennan Companies Entities Covered by the BCRs Marsh & McLennan Companies Entities Covered by the BCRs The Marsh and McLennan Companies Binding Corporate Rules (BCRs) are a means of transferring personal data internationally within the Marsh & McLennan

More information

Contents INTRODUCTIONS, RETIPPING, RESHARPENING INFORMATION/PRICES DIAGNOSTIC INSTRUMENTS, DRESSING PLIERS, MIRRORS & MIRROR HANDLES

Contents INTRODUCTIONS, RETIPPING, RESHARPENING INFORMATION/PRICES DIAGNOSTIC INSTRUMENTS, DRESSING PLIERS, MIRRORS & MIRROR HANDLES 3 3 Contents SECTION ONE: PAGES 1-10 INTRODUCTIONS, RETIPPING, RESHARPENING INFORMATION/PRICES SECTION TWO: PAGES 11-18 DIAGNOSTIC INSTRUMENTS, DRESSING PLIERS, MIRRORS & MIRROR HANDLES SECTION THREE:

More information

Scout Automatic service station for skis

Scout Automatic service station for skis EN Scout Automatic service station for skis Scout Maximum performance with a compact design! With the development of the Scout, WINTERSTEIGER has finally decoupled size and performance. Thanks to the machine's

More information

Synthetic air supply by WITT hygienic, safe, cost-effective!

Synthetic air supply by WITT hygienic, safe, cost-effective! TECHNOLOGY FOR GASES Synthetic air supply by WITT hygienic, safe, cost-effective! The certified MED-MG for medical applications. Certified and approved as medical device class IIb CE marked according to

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET E 14 N 22 ANE Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its central

More information

Volume Determination for 2 kg~20 kg in NIM

Volume Determination for 2 kg~20 kg in NIM Volume Determination for 2 kg~20 kg in NIM Yao Hong 1 Wang Jian 1 Ding Jing an 1 Guo Lixiong 2 Zhong Ruilin 1 1 Mass Standard Lab, Mechanical and Acoustic Metrology Division, NIM, China 2 SMERI, Shanghai,

More information

Eurosonic 4D - 3D - Micro ENGLISH

Eurosonic 4D - 3D - Micro ENGLISH Eurosonic 4D - 3D - Micro ENGLISH INDEX The state of the art ultrasonic cleaners. 05 Eurosonic 4D. For those who don t settle for second best. 07 HOW TO USE THE COVER 15 DIRECT METHOD AND INDIRECT METHOD

More information

GAS SAMPLING PUMPS WITH KNF DOUBLE DIAPHRAGM SYSTEM

GAS SAMPLING PUMPS WITH KNF DOUBLE DIAPHRAGM SYSTEM GAS SAMPLING PUMPS WITH KNF DOUBLE DIAPHRAGM SYSTEM DATA SHEET E065 Cutaway - Double diaphragm pump Concept The Diaphragm Vacuum Pumps from KNF are based on a simple principal - an elastic diaphragm, fixed

More information

HyDefinition HD4070. Plasma Arc Cutting / Marking System. Product Configuration Manual Revision

HyDefinition HD4070. Plasma Arc Cutting / Marking System. Product Configuration Manual Revision HyDefinition HD4070 Plasma Arc Cutting / Marking System Product Configuration Manual 803770 Revision 1 4070.97 HD4070 Product Configuration Manual (P/N 803770) Revision 1 December, 2002 Hypertherm, Inc.

More information

DIAPHRAGM VACUUM PUMPS WITH KNF STABILIZATION SYSTEM

DIAPHRAGM VACUUM PUMPS WITH KNF STABILIZATION SYSTEM DIAPHRAGM VACUUM PUMPS WITH KNF STABILIZATION SYSTEM DATA SHEET E 015 N 920 APE-W Automatic voltage adjustment for worldwide use (as an option with external signal input). N 920 APDC-B with brushless DC

More information

TSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance

TSuBAki SPROCKET SOLUTIONS. SproCkeTS For MAXiMuM performance TSuBAki SPROCKET SOLUTIONS SproCkeTS For MAXiMuM performance 1 TSUBAKI Sprocket Solutions Made IN JAPAN Tsubakimoto Chain Co. based in Japan is the world s largest chain manufacturer with manufacturing

More information

AUW-D AUW AUX AUYSeries

AUW-D AUW AUX AUYSeries AUW-D AUW AUX AUYSeries Shimadzu s UniBloc technology and over 80 years of experience in precision weighing instruments bring analytical balances to a new level of stability, reliability and response.

More information

ONSTRUCTION. Road Milling & Soil Stabilization Tools DRILLING TRENCHING ROAD REHABILITATION

ONSTRUCTION. Road Milling & Soil Stabilization Tools DRILLING TRENCHING ROAD REHABILITATION ONSTRUCTION Road Milling & Soil Stabilization Tools DRILLING TRENCHING ROAD REHABILITATION SOLID Innovation Quality Service Value Application Expertise The foundation for a successful road construction

More information

TYPE 7800 SERIES 7848D/7848W UNIVERSAL VESSEL SEAL Technical Specification

TYPE 7800 SERIES 7848D/7848W UNIVERSAL VESSEL SEAL Technical Specification A Face/Primary Ring B Seat/Mating Ring C O-ring D Disc E Sleeve F Retaining Sleeve D C E C F A B Product Description The Universal Vessel Seal 7800 Series is a modular cartridge seal for use in a wide

More information

FPG8601 Force Balanced Piston Gauge

FPG8601 Force Balanced Piston Gauge FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution

More information

Zoll-Dental Instrument Catalog

Zoll-Dental Instrument Catalog BIE TECH DENTAL SELLS ZOLL INSTRUMENTS Zoll-Dental Instrument Catalog Zoll-Dental: Innovations In Instruments Zoll-Dental is the factory-direct source for quality crafted dental hand instruments. Zoll-Dental

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET E030 N 145.2 ANE Concept The Diaphragm Pumps from KNF are based on a simple principal - an elastic diaphragm, fixed on its edge, moves up and down its

More information

Marsh & McLennan Companies Entities Covered by the BCRs

Marsh & McLennan Companies Entities Covered by the BCRs Marsh & McLennan Companies Entities Covered by the BCRs The Marsh and McLennan Companies Binding Corporate Rules (BCRs) are a means of transferring personal data internationally within the Marsh & McLennan

More information

MASTER CATALOG. NEW Beyond UJDE HARVI III Carbide End Mills Inch in KCSM15. Diameter Expansion!

MASTER CATALOG. NEW Beyond UJDE HARVI III Carbide End Mills Inch in KCSM15. Diameter Expansion! MASTER CATALOG NEW Beyond UJDE HARVI III Carbide End Mills Inch in KCSM15 Diameter Expansion! HARVI III High-Performance Solid Carbide End Mills Primary Application HARVI III takes high-performance profiling,

More information

PHANTOM MASTABILITY NEUROLOGICAL HOLDING SYSTEM. Bringing simplicity to complexity

PHANTOM MASTABILITY NEUROLOGICAL HOLDING SYSTEM. Bringing simplicity to complexity PHANTOM MASTABILITY NEUROLOGICAL HOLDING SYSTEM Bringing simplicity to complexity STABILITY STARTS AT STEP ONE The Phantom MaStability TM Neurological Holding System is designed to deliver a consistently-stable

More information

OD plug gauge. for bores and internal profiles from dia. 2,5 mm. OD plug gauge in open design. Special designs Accessories. OD plug gauge for various

OD plug gauge. for bores and internal profiles from dia. 2,5 mm. OD plug gauge in open design. Special designs Accessories. OD plug gauge for various OD plug gauge for various bore diameters Cross sleeve Cross sleeve with runners OD plug gauge for bores and internal profiles from dia. 2,5 300 Oskar Schwenk GmbH & Co. Esslinger Straße 84 70736 Fellbach

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DATA SHEET E 16 N 35 ANE with IP 2 motor Concept The diaphragm pumps from KNF are based on a simple principal - an elastic diaphragm, ixed on its edge, moves up and

More information

INSTRUCTIONS FOR USE SMALL BONE POWER SYSTEM. BUSAMedical.com SURGICAL POWER & ACCESSORIES

INSTRUCTIONS FOR USE SMALL BONE POWER SYSTEM. BUSAMedical.com SURGICAL POWER & ACCESSORIES SMALL BONE POWER SYSTEM INSTRUCTIONS FOR USE SURGICAL POWER & ACCESSORIES BUSAMedical.com 1 TABLE OF CONTENTS Introduction PAGE 3 Dual Air/Nitrogen Hose: A90-200 and KM-A90-500 Series PAGE 28-29 Intended

More information

Operating Instructions for Flow Restrictors. Model: REG

Operating Instructions for Flow Restrictors. Model: REG Operating Instructions for Flow Restrictors Model: REG 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...

More information

Operating Instructions. Small Bone Power System

Operating Instructions. Small Bone Power System Table of Contents General Instructions, Cautions 2 Thank you for choosing Brasseler USA as supplier of your small bone powered surgical instrument and accessory needs. The information and procedures described

More information

PNEUMATIC AIR TOOLS

PNEUMATIC AIR TOOLS PNEUMATIC AIR TOOLS AIR IMPACT WRENCHES - INDUSTRIAL AT0308 AT0309 AT0306 1" HEAVY DUTY AIR IMPACT WRENCH 1" AIR IMPACT WRENCH 3/4" HEAVY DUTY AIR IMPACT WRENCH AT0308 AT0309 AT0306 Free Speed: 4.000 rpm

More information

INDEXABLE DRILLING DRILLING INSERTS

INDEXABLE DRILLING DRILLING INSERTS INDEXABE DRIING INDEXABE DRIING DRIING INSERTS Multi-Mat TM indexable drilling solutions for general drilling needs in a variety of materials. offers a range of high quality drill bodies. Combining our

More information

New Ne w sideflexing BelTs 2555 series

New Ne w sideflexing BelTs 2555 series NE 09e New sideflexing BELTS 2 series 1 SIDEFLEXING BELTS PRODUCTION RANGE SERIES MIN. RADIUS/IDTH AVARAGE RATIO PATHS GUIDE SYSTEM APPLICATIONS BELT MATERIAL 2 2T 1, 1, Bidirectional S Bidirectional S

More information

Capillary Conversion System CCS-4/NC & CCS-05/NC. Installation and Operating Instructions. Operating Instructions

Capillary Conversion System CCS-4/NC & CCS-05/NC. Installation and Operating Instructions. Operating Instructions Operating Instructions Check the detector for the correct operating conditions. If make-up gas is being used a flow of 30ml/min. of carrier plus make-up is normally recommended. This can most effectively

More information

SMALL BONE POWER SYSTEM. Instructions for Use RX ONLY. Rx Only

SMALL BONE POWER SYSTEM. Instructions for Use RX ONLY. Rx Only SMALL BONE POWER SYSTEM Instructions for Use RX ONLY Rx Only TABLE OF CONTENTS Introduction PAGE 3 Oscillating Saw: PM-M13 Series PAGE 27 Intended Use PAGE 3 Reciprocating Saw: PM-M14 Series PAGE 29 General

More information

D Quality and Precision you can Trust in Oxygen Administration CONVENTIONAL FLOWMETER DIGITAL FLOWMETER COMPACT FLOWMETER

D Quality and Precision you can Trust in Oxygen Administration CONVENTIONAL FLOWMETER DIGITAL FLOWMETER COMPACT FLOWMETER D-10023-2009 Quality and Precision you can Trust in Oxygen Administration CONVENTIONAL FLOWMETER DIGITAL FLOWMETER COMPACT FLOWMETER 02 MT-3287-2003 Administration of oxygen The use of oxygen therapy in

More information

VARIAN BRACHYTHERAPY INFORM PLAN VERIFY TREAT. GammaMedplus ix, 3/24 ix HDR Afterloader

VARIAN BRACHYTHERAPY INFORM PLAN VERIFY TREAT. GammaMedplus ix, 3/24 ix HDR Afterloader VARIAN BRACHYTHERAPY INFORM PLAN VERIFY TREAT GammaMedplus ix, 3/24 ix HDR Afterloader The GammaMed legacy Proven performer moves to the next level Excellence and innovation are the hallmarks of the GammaMed

More information

V BEVELLING MACHINES ORBITAL BEVELLING

V BEVELLING MACHINES ORBITAL BEVELLING ORBITAL BEVELLING GA121 ø15 - ø121 mm ø0,25 to ø4,5 '' - Basic jaws Ø1 to 4,5 ( Ø24 to Ø121 mm ) - Included stainless steel auxiliary jaws Ø 0,25 to 4,25 ( Ø 15 to Ø 108 mm ) - Supplied with plastic protection

More information

SERIES 3000 SERIES 3000 SWISS MADE EN-ID-1017

SERIES 3000 SERIES 3000 SWISS MADE EN-ID-1017 SERIES 000 SERIES 000 EN-ID-7 SWISS MADE BEST SOLUTION IN STAINLESS STEELS AND SUPER ALLOYS Chip evacuation Ø 0. -. mm SERIES 000 Double performance VX COATED Process security Ø. - 0 mm No sticking PERFORMANCE

More information

Compact medical oxygen generator for : J Anaesthesia machines / OTs J Recovery ventilators / ICUs J Oxygenotherapy J Cylinder filling systems

Compact medical oxygen generator for : J Anaesthesia machines / OTs J Recovery ventilators / ICUs J Oxygenotherapy J Cylinder filling systems Compact medical oxygen generator for : J Anaesthesia machines / OTs J Recovery ventilators / ICUs J Oxygenotherapy J Cylinder filling systems Plug & play oxygen generator for healthcare facilities For

More information

V MW & 2.0 MW High output in modest winds

V MW & 2.0 MW High output in modest winds V90-1.8 MW & 2.0 MW High output in modest winds Innovation in blade technology High output in modest winds With the V90-1.8 MW and V90-2.0 MW models, Vestas introduces two turbines that open up a whole

More information

BHN SURGICALS Pvt.Ltd

BHN SURGICALS Pvt.Ltd BHN SURGICALS Pvt.Ltd Manufacturing - Technology - Marketing TITANIUM INSTRUMENTS Micro Tissue Forceps TITANIUM Ring Smooth A B Fig A BRF 01.50 A BRF 01.80 A BRF 02.10 B BRF 01.51 B BRF 01.81 B BRF 02.11

More information

FIREFIGHTING EQUIPMENT

FIREFIGHTING EQUIPMENT FIREFIGHTING EQUIPMENT User Manual ANTENOR 3000 Base or portable Trailer DOC 1974 En Rev.B - 22/10/13 Tel : 03 25 39 84 78 - Fax : 03 25 39 84 90 - Email : france@pok.fr - Web : www.pok.fr Identification

More information

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS DATA SHEET N 922 N 922 FTE Concept The diaphragm pumps from KNF are based on a simple principle - an elastic diaphragm, ixed on its edge, moves up and

More information

Original BDS core drill from own production

Original BDS core drill from own production 44 Original BDS core drill from own production Product quality is not a coincidence BDS produces core drills at their facility in Mönchengladbach, with all the benefits for users worldwide: 3 High manufacturing

More information

Tourniquet Systems Pressure Infusion

Tourniquet Systems Pressure Infusion Tourniquet Systems Pressure Infusion VBM Medizintechnik GmbH VBM 1 VBM 2 Summary Tourniquets and Accessories Digital Tourniquets... Compressed Air Tourniquets... Electronic Tourniquets... Application Tourniquets...

More information

Air-service devices, Series MU1

Air-service devices, Series MU1 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Air-service devices, Series MU1 Technical data Pressure regulator valve, MU1, G 1 Technical Data Type Operating

More information

Do you require maximum pressure stability in your gas supply?

Do you require maximum pressure stability in your gas supply? TECHNOLOGY FOR GASES Do you require maximum pressure stability in your gas supply? Rely on 40 years of experience in dome-loaded pressure regulation. Dynamic WITT regulators ensure a stable, adaptable

More information

Trying to imagine this incredibly long period elicits feelings of gratitude and awe for

Trying to imagine this incredibly long period elicits feelings of gratitude and awe for PARIS MIKI HOLDINGS Inc. Accommodating Each and Every Customer Life has existed on Earth for 3.5 billion years. Trying to imagine this incredibly long period elicits feelings of gratitude and awe for the

More information

TrapLiner Catheter. Guide Extension Plus Wire Trapping

TrapLiner Catheter. Guide Extension Plus Wire Trapping TrapLiner Catheter Guide Extension Plus Wire Trapping 2-in-1 Device Guide Extension Catheter With Trapping Capabilities The TrapLiner Catheter is a rapid exchange guide extension catheter that combines

More information

GESTRA. GESTRA Steam Systems CB 1... CB 2... Installation Instructions Swing Flap Non-Return Valves CB 1..., CB 2...

GESTRA. GESTRA Steam Systems CB 1... CB 2... Installation Instructions Swing Flap Non-Return Valves CB 1..., CB 2... GESTRA GESTRA Steam Systems CB 1... CB 2... Installation Instructions 810707-02 Swing Flap Non-Return Valves CB 1..., CB 2... 1 Contents Important Notes Page Usage for the intended purpose... 8 Safety

More information

HT4400 Plasma Arc Cutting System Gas Panel

HT4400 Plasma Arc Cutting System Gas Panel HT44 Plasma Arc Cutting System Gas Panel Instruction Manual 8421 - Revision 1 Integrated Plasma System For use with the NOTICE Use the HT44 instruction manual, 8358 as well as this manual, 8421, to install,

More information

Clinker Cooling- Making the most out of your energy

Clinker Cooling- Making the most out of your energy Clinker Cooling- Making the most out of your energy VDMA May 2013 Stephan Oehme Director Sales and Technology Introduction ETA Cooler 1. CP Clinker Coolers 2. ETA Cooler Self Protected design Process Optimised

More information

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS

CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS CHEMICALLY RESISTANT DIAPHRAGM GAS SAMPLING PUMPS DATA SHEET N 9 N 9 FTE Concept The diaphragm pumps from KNF are based on a simple principle an elastic diaphragm, ixed on its edge, moves up and down its

More information

for the machining of steel materials aggressive cutting speeds and improved tool life reduced cycle times and improved hole quality RT 100 S

for the machining of steel materials aggressive cutting speeds and improved tool life reduced cycle times and improved hole quality RT 100 S for the machining of steel materials aggressive cutting speeds and improved tool life reduced cycle times and improved hole quality RT 100 S STEEL MACHINING P Strong in steel RT100 RT 100 S was developed

More information

Properties Good general purpose wheel Advantages Suitable for use on all standard construction materials Attractive price-performance ratio

Properties Good general purpose wheel Advantages Suitable for use on all standard construction materials Attractive price-performance ratio Quality diamond cutting blade DS 60 U Good general purpose wheel Suitable for use on all standard construction materials Attractive price-performance ratio Pavement slabs operating 115 x 22,23 80 m/s 13,300

More information

M/160300/M/11, M/160300/M/12 Angular grippers

M/160300/M/11, M/160300/M/12 Angular grippers M/63/M/, M/63/M/2 ngular grippers Single acting, double acting - Magnetic piston - Ø 8... 25 mm Smooth, accurate movement ong, uninterrupted service life ow weight ompact size Integral magnets for positional

More information

Depth Micrometer Page 205. Depth Gauge Page 208. Depth Gauge Accessories Page 218

Depth Micrometer Page 205. Depth Gauge Page 208. Depth Gauge Accessories Page 218 Depth Measuring Instruments Depth Micrometer Page 205 Depth Gauge Page 208 Depth Gauge ccessories Page 218 204 Measuring force Measuring span Spindle pitch Micrometer Head Feed (0-25 ) Flatness of reference

More information

MINI GAS SAMPLING PUMPS WITH DOUBLE DIAPHRAGM SYSTEM

MINI GAS SAMPLING PUMPS WITH DOUBLE DIAPHRAGM SYSTEM MINI GAS SAMPLING PUMPS WITH DOUBLE DIAPHRAGM SYSTEM DATA SHEET E 081 N 86 AN.12DC-B Concept Double diaphragm pumps from KNF are based on a simple principle: an elastic working membrane and safety membrane

More information

SURGICAL. PR-D935E Ver NN

SURGICAL. PR-D935E Ver NN Surgic Pro / VarioSurg 3 / isd900 PR-D935E Ver.2 16.06.NN SYNERGY IN IMPLANTOLOGY Surgic Pro VarioSurg3 Surgical Micromotor System Ultrasonic Bone Surgery System Two linked surgical systems that use a

More information

25+ instruments answer the most common barrier to 25G instrument flexibility.

25+ instruments answer the most common barrier to 25G instrument flexibility. Fine Membranes Heavy Membranes ILM Forceps End-grasping design ideal for maculorhexis or other fine membrane grasping Tip style improves visualization Multi-purpose grasping applications GRIESHABER MAXGRIP

More information

better measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.

better measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars. Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis

More information

MANUAL KPS Pressure Control Valve

MANUAL KPS Pressure Control Valve TetraTec Instruments GmbH Gewerbestrasse 8 71144 Steinenbronn Deutschland E-Mail: info@tetratec.de Tel.: 07157/5387-0 Fax: 07157/5387-10 MANUAL Pressure Control Valve *** VERSION 1.0 *** Update: 17.11.2006

More information

Description Pressure range Connection thread Device Page

Description Pressure range Connection thread Device Page Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4

More information

ONSTRUCTION. RockRazor Foundation Drilling & Trenching Platform

ONSTRUCTION. RockRazor Foundation Drilling & Trenching Platform ONSTRUCTION RockRazor Foundation Drilling & Trenching Platform TM Introducing The new quick-change indexable cutting system for earthworks. The RockRazor TM system s quick change ability reduces machine

More information

Consistency in Excellence.

Consistency in Excellence. Consistency in Excellence. The Round Gel Implant Family Cohesive I and Cohesive II Not for distribution in the U.S. All cohesive, all the time. More styles. More choices. Round Low wide base lower profile

More information

Dräger P7 Pressure, Leak and Leak Rate Measurement

Dräger P7 Pressure, Leak and Leak Rate Measurement Dräger P7 Pressure, Leak and Leak Rate Measurement The gas field entails many dangers and requires maximum safety. This industry has a corresponding number of test standards. Play it safe with the Dräger

More information

Technical Specifications

Technical Specifications E_Trim91.qxp 16.12.2002 19:05 Uhr Seite 1 Either or! The correct edge sharpness can decide whether your client s next ski day will be a gripping experience or an embarasing succession of slips and slides.

More information

high tech ski & snowboard tuning tools

high tech ski & snowboard tuning tools research design made with HIGH TECH Born in 1975, the SKI MAN trade-mark has become internationally known thanks to his high-tech and high-quality products for ski and snowboard hand tuning. Our relationship

More information

SAFETY FENCES FOR SWIMMING POOL

SAFETY FENCES FOR SWIMMING POOL SAFETY FENCES FOR SWIMMING POOL NFP 90-306 Standard Compliant - Private and collective application - Every project has a specific nature, according to the shape, the support of the installation, the exposure,

More information

PERFORMANCE ZONES

PERFORMANCE ZONES A H E A D O F T H E C U R V E PERFORMANCE ZONES Each aspect of the graft is designed to optimize conformability and seal, with optimal radial force precisely where you need it. A PRIMARY SEAL AND FIXATION

More information

CAT-W Iwaki pneumatic drive bellows pumps

CAT-W Iwaki pneumatic drive bellows pumps CAT-W 0051-01 Iwaki pneumatic drive bellows pumps For Ultrapure Chemical Delivery in Semiconductor Processing The F series comprises pneumatic drive bellows pumps designed for use in semiconductor manufacturing

More information

V5012C Kombi-DP Diaphragm Unit RETROFIT AUTOMATIC DP CONTROLLER

V5012C Kombi-DP Diaphragm Unit RETROFIT AUTOMATIC DP CONTROLLER V5012C Kombi-DP Diaphragm Unit RETROFIT AUTOMATIC DP CONTROLLER Application PRODUCT DATA The V5012C Kombi-DP diaphragm unit is installed onto a V5010 Kombi-3-plus BLUE or V5032 Kombi-2-plus return mains

More information

F OVERHEAD CONSTRUCTION & STRINGING EQUIPMENT GRIP SELECTION

F OVERHEAD CONSTRUCTION & STRINGING EQUIPMENT GRIP SELECTION Hi-Tool NGK Wire Grips (MADE IN JAPAN) safety latch, with most models including a patented one grip as Convenient be more cost effective by being able to 40, 50 & 60kN grip models feature a twist grip

More information

A Trusted Path to Outstanding Outcomes

A Trusted Path to Outstanding Outcomes A Trusted Path to Outstanding Outcomes Deep skin resurfacing Courtesy of Suzanne L. Kilmer, MD Periorbital skin resurfacing Courtesy of J. Kevin Duplechain, MD Scar revision Courtesy of Jill S. Waibel,

More information

PG9607 Piston Gauge. Automated primary pressure reference for absolute and gauge pressures to 500 kpa

PG9607 Piston Gauge. Automated primary pressure reference for absolute and gauge pressures to 500 kpa PG9607 Piston Gauge Automated primary pressure reference for absolute and gauge pressures to 500 kpa Designed for fundamental metrology research The DH Instruments PG9607 is the next generation of absolute

More information

SOFRASAR TUNNEL PRODUCTS CONNECTING ALL COMPONENTS

SOFRASAR TUNNEL PRODUCTS CONNECTING ALL COMPONENTS www.optimas.com SOFRASAR TUNNEL PRODUCTS CONNECTING ALL COMPONENTS CONTENTS DOWEL SYSTEM SOF-FIX AXIS 110 PG. 06 DOWEL SYSTEMS 04 BOLTING SYSTEMS 08 GROUT LIFT SOCKETS 11 CENTERING DOWELS AND SHEAR DOWELS

More information

Advanced Test Equipment Rentals ATEC (2832)

Advanced Test Equipment Rentals ATEC (2832) Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) VS Series Leak Detectors for Vacuum Furnaces Rate of rise and vacuum decay tests will not locate leaks, they will only

More information

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS

DIAPHRAGM VACUUM PUMPS AND COMPRESSORS DIAPHRAGM VACUUM PUMPS AND COMPRESSORS N26.1, N26.2, N26.3 N 26.1 ANE Concept The Diaphragm Vacuum Pumps from KNF are based on a simple principal - an elastic diaphragm, fixed on its edge, moves up and

More information

runner systems. At present, this feature is available for the Gacela (roller) runner systems, Cisne (ball bearing) runner systems,

runner systems. At present, this feature is available for the Gacela (roller) runner systems, Cisne (ball bearing) runner systems, F U R N I T U R E F I T T I N G S M A N U F A C TU R E R gradual closing Indamatic can now also be applied as an option to the more economical drawer and runner systems. At present, this feature is available

More information

CO2 incubator with additional process controls

CO2 incubator with additional process controls CB series 53 C2 Incubators C2 incubator with additional process controls The BINDER CB series C2 incubator is the premium class among the C2 incubators. It is suitable for all sensitive incubation applications

More information

Including the new. series. HTC Pocket Grinding Guide.

Including the new. series. HTC Pocket Grinding Guide. Including the new series HTC Pocket Grinding Guide HTC Superfloor Platinum The intention of the first grinding step is to create a good end result. All subsequent grinding steps - mu Resin/plastic bonded

More information